/* * * Alchemy Semi Db1x00 boards specific pcmcia routines. * * Copyright 2002 MontaVista Software Inc. * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com * * Copyright 2004 Pete Popov, updated the driver to 2.6. * Followed the sa11xx API and largely copied many of the hardware * independent functions. * * ######################################################################## * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as * published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * * ######################################################################## * * */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/device.h> #include <linux/init.h> #include <asm/irq.h> #include <asm/signal.h> #include <asm/mach-au1x00/au1000.h> #if defined(CONFIG_MIPS_DB1200) #include <db1200.h> #elif defined(CONFIG_MIPS_PB1200) #include <pb1200.h> #else #include <asm/mach-db1x00/db1x00.h> static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #endif #include "au1000_generic.h" #if 0 #define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args) #else #define debug(x,args...) #endif struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS]; extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int); static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt) { #ifdef CONFIG_MIPS_DB1550 skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3; #elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT; #else skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2; #endif return 0; } static void db1x00_pcmcia_shutdown(struct au1000_pcmcia_socket *skt) { bcsr->pcmcia = 0; /* turn off power */ au_sync_delay(2); } static void db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state *state) { u32 inserted; unsigned char vs; state->ready = 0; state->vs_Xv = 0; state->vs_3v = 0; state->detect = 0; switch (skt->nr) { case 0: vs = bcsr->status & 0x3; #if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) inserted = BOARD_CARD_INSERTED(0); #else inserted = !(bcsr->status & (1<<4)); #endif break; case 1: vs = (bcsr->status & 0xC)>>2; #if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) inserted = BOARD_CARD_INSERTED(1); #else inserted = !(bcsr->status & (1<<5)); #endif break; default:/* should never happen */ return; } if (inserted) debug("db1x00 socket %d: inserted %d, vs %d pcmcia %x\n", skt->nr, inserted, vs, bcsr->pcmcia); if (inserted) { switch (vs) { case 0: case 2: state->vs_3v=1; break; case 3: /* 5V */ break; default: /* return without setting 'detect' */ printk(KERN_ERR "db1x00 bad VS (%d)\n", vs); } state->detect = 1; state->ready = 1; } else { /* if the card was previously inserted and then ejected, * we should turn off power to it */ if ((skt->nr == 0) && (bcsr->pcmcia & BCSR_PCMCIA_PC0RST)) { bcsr->pcmcia &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN | BCSR_PCMCIA_PC0VPP | BCSR_PCMCIA_PC0VCC); au_sync_delay(10); } else if ((skt->nr == 1) && bcsr->pcmcia & BCSR_PCMCIA_PC1RST) { bcsr->pcmcia &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN | BCSR_PCMCIA_PC1VPP | BCSR_PCMCIA_PC1VCC); au_sync_delay(10); } } state->bvd1=1; state->bvd2=1; state->wrprot=0; } static int db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_state_t *state) { u16 pwr; int sock = skt->nr; debug("config_skt %d Vcc %dV Vpp %dV, reset %d\n", sock, state->Vcc, state->Vpp, state->flags & SS_RESET); /* pcmcia reg was set to zero at init time. Be careful when * initializing a socket not to wipe out the settings of the * other socket. */ pwr = bcsr->pcmcia; pwr &= ~(0xf << sock*8); /* clear voltage settings */ state->Vpp = 0; switch(state->Vcc){ case 0: /* Vcc 0 */ pwr |= SET_VCC_VPP(0,0,sock); break; case 50: /* Vcc 5V */ switch(state->Vpp) { case 0: pwr |= SET_VCC_VPP(2,0,sock); break; case 50: pwr |= SET_VCC_VPP(2,1,sock); break; case 12: pwr |= SET_VCC_VPP(2,2,sock); break; case 33: default: pwr |= SET_VCC_VPP(0,0,sock); printk("%s: bad Vcc/Vpp (%d:%d)\n", __func__, state->Vcc, state->Vpp); break; } break; case 33: /* Vcc 3.3V */ switch(state->Vpp) { case 0: pwr |= SET_VCC_VPP(1,0,sock); break; case 12: pwr |= SET_VCC_VPP(1,2,sock); break; case 33: pwr |= SET_VCC_VPP(1,1,sock); break; case 50: default: pwr |= SET_VCC_VPP(0,0,sock); printk("%s: bad Vcc/Vpp (%d:%d)\n", __func__, state->Vcc, state->Vpp); break; } break; default: /* what's this ? */ pwr |= SET_VCC_VPP(0,0,sock); printk(KERN_ERR "%s: bad Vcc %d\n", __func__, state->Vcc); break; } bcsr->pcmcia = pwr; au_sync_delay(300); if (sock == 0) { if (!(state->flags & SS_RESET)) { pwr |= BCSR_PCMCIA_PC0DRVEN; bcsr->pcmcia = pwr; au_sync_delay(300); pwr |= BCSR_PCMCIA_PC0RST; bcsr->pcmcia = pwr; au_sync_delay(100); } else { pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN); bcsr->pcmcia = pwr; au_sync_delay(100); } } else { if (!(state->flags & SS_RESET)) { pwr |= BCSR_PCMCIA_PC1DRVEN; bcsr->pcmcia = pwr; au_sync_delay(300); pwr |= BCSR_PCMCIA_PC1RST; bcsr->pcmcia = pwr; au_sync_delay(100); } else { pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN); bcsr->pcmcia = pwr; au_sync_delay(100); } } return 0; } /* * Enable card status IRQs on (re-)initialisation. This can * be called at initialisation, power management event, or * pcmcia event. */ void db1x00_socket_init(struct au1000_pcmcia_socket *skt) { /* nothing to do for now */ } /* * Disable card status IRQs and PCMCIA bus on suspend. */ void db1x00_socket_suspend(struct au1000_pcmcia_socket *skt) { /* nothing to do for now */ } struct pcmcia_low_level db1x00_pcmcia_ops = { .owner = THIS_MODULE, .hw_init = db1x00_pcmcia_hw_init, .hw_shutdown = db1x00_pcmcia_shutdown, .socket_state = db1x00_pcmcia_socket_state, .configure_socket = db1x00_pcmcia_configure_socket, .socket_init = db1x00_socket_init, .socket_suspend = db1x00_socket_suspend }; int au1x_board_init(struct device *dev) { int ret = -ENODEV; bcsr->pcmcia = 0; /* turn off power, if it's not already off */ au_sync_delay(2); ret = au1x00_pcmcia_socket_probe(dev, &db1x00_pcmcia_ops, 0, 2); return ret; }