// SPDX-License-Identifier: GPL-2.0+ /* * *************************************************************************** * Marvell Armada-3700 Serial Driver * Author: Wilson Ding <dingwei@marvell.com> * Copyright (C) 2015 Marvell International Ltd. * *************************************************************************** */ #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/console.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/init.h> #include <linux/io.h> #include <linux/iopoll.h> #include <linux/math64.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/serial_core.h> #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_flip.h> /* Register Map */ #define UART_STD_RBR 0x00 #define UART_EXT_RBR 0x18 #define UART_STD_TSH 0x04 #define UART_EXT_TSH 0x1C #define UART_STD_CTRL1 0x08 #define UART_EXT_CTRL1 0x04 #define CTRL_SOFT_RST BIT(31) #define CTRL_TXFIFO_RST BIT(15) #define CTRL_RXFIFO_RST BIT(14) #define CTRL_SND_BRK_SEQ BIT(11) #define CTRL_BRK_DET_INT BIT(3) #define CTRL_FRM_ERR_INT BIT(2) #define CTRL_PAR_ERR_INT BIT(1) #define CTRL_OVR_ERR_INT BIT(0) #define CTRL_BRK_INT (CTRL_BRK_DET_INT | CTRL_FRM_ERR_INT | \ CTRL_PAR_ERR_INT | CTRL_OVR_ERR_INT) #define UART_STD_CTRL2 UART_STD_CTRL1 #define UART_EXT_CTRL2 0x20 #define CTRL_STD_TX_RDY_INT BIT(5) #define CTRL_EXT_TX_RDY_INT BIT(6) #define CTRL_STD_RX_RDY_INT BIT(4) #define CTRL_EXT_RX_RDY_INT BIT(5) #define UART_STAT 0x0C #define STAT_TX_FIFO_EMP BIT(13) #define STAT_TX_FIFO_FUL BIT(11) #define STAT_TX_EMP BIT(6) #define STAT_STD_TX_RDY BIT(5) #define STAT_EXT_TX_RDY BIT(15) #define STAT_STD_RX_RDY BIT(4) #define STAT_EXT_RX_RDY BIT(14) #define STAT_BRK_DET BIT(3) #define STAT_FRM_ERR BIT(2) #define STAT_PAR_ERR BIT(1) #define STAT_OVR_ERR BIT(0) #define STAT_BRK_ERR (STAT_BRK_DET | STAT_FRM_ERR \ | STAT_PAR_ERR | STAT_OVR_ERR) /* * Marvell Armada 3700 Functional Specifications describes that bit 21 of UART * Clock Control register controls UART1 and bit 20 controls UART2. But in * reality bit 21 controls UART2 and bit 20 controls UART1. This seems to be an * error in Marvell's documentation. Hence following CLK_DIS macros are swapped. */ #define UART_BRDV 0x10 /* These bits are located in UART1 address space and control UART2 */ #define UART2_CLK_DIS BIT(21) /* These bits are located in UART1 address space and control UART1 */ #define UART1_CLK_DIS BIT(20) /* These bits are located in UART1 address space and control both UARTs */ #define CLK_NO_XTAL BIT(19) #define CLK_TBG_DIV1_SHIFT 15 #define CLK_TBG_DIV1_MASK 0x7 #define CLK_TBG_DIV1_MAX 6 #define CLK_TBG_DIV2_SHIFT 12 #define CLK_TBG_DIV2_MASK 0x7 #define CLK_TBG_DIV2_MAX 6 #define CLK_TBG_SEL_SHIFT 10 #define CLK_TBG_SEL_MASK 0x3 /* These bits are located in both UARTs address space */ #define BRDV_BAUD_MASK 0x3FF #define BRDV_BAUD_MAX BRDV_BAUD_MASK #define UART_OSAMP 0x14 #define OSAMP_DEFAULT_DIVISOR 16 #define OSAMP_DIVISORS_MASK 0x3F3F3F3F #define OSAMP_MAX_DIVISOR 63 #define MVEBU_NR_UARTS 2 #define MVEBU_UART_TYPE "mvebu-uart" #define DRIVER_NAME "mvebu_serial" enum { /* Either there is only one summed IRQ... */ UART_IRQ_SUM = 0, /* ...or there are two separate IRQ for RX and TX */ UART_RX_IRQ = 0, UART_TX_IRQ, UART_IRQ_COUNT }; /* Diverging register offsets */ struct uart_regs_layout { unsigned int rbr; unsigned int tsh; unsigned int ctrl; unsigned int intr; }; /* Diverging flags */ struct uart_flags { unsigned int ctrl_tx_rdy_int; unsigned int ctrl_rx_rdy_int; unsigned int stat_tx_rdy; unsigned int stat_rx_rdy; }; /* Driver data, a structure for each UART port */ struct mvebu_uart_driver_data { bool is_ext; struct uart_regs_layout regs; struct uart_flags flags; }; /* Saved registers during suspend */ struct mvebu_uart_pm_regs { unsigned int rbr; unsigned int tsh; unsigned int ctrl; unsigned int intr; unsigned int stat; unsigned int brdv; unsigned int osamp; }; /* MVEBU UART driver structure */ struct mvebu_uart { struct uart_port *port; struct clk *clk; int irq[UART_IRQ_COUNT]; struct mvebu_uart_driver_data *data; #if defined(CONFIG_PM) struct mvebu_uart_pm_regs pm_regs; #endif /* CONFIG_PM */ }; static struct mvebu_uart *to_mvuart(struct uart_port *port) { return (struct mvebu_uart *)port->private_data; } #define IS_EXTENDED(port) (to_mvuart(port)->data->is_ext) #define UART_RBR(port) (to_mvuart(port)->data->regs.rbr) #define UART_TSH(port) (to_mvuart(port)->data->regs.tsh) #define UART_CTRL(port) (to_mvuart(port)->data->regs.ctrl) #define UART_INTR(port) (to_mvuart(port)->data->regs.intr) #define CTRL_TX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_tx_rdy_int) #define CTRL_RX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_rx_rdy_int) #define STAT_TX_RDY(port) (to_mvuart(port)->data->flags.stat_tx_rdy) #define STAT_RX_RDY(port) (to_mvuart(port)->data->flags.stat_rx_rdy) static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS]; static DEFINE_SPINLOCK(mvebu_uart_lock); /* Core UART Driver Operations */ static unsigned int mvebu_uart_tx_empty(struct uart_port *port) { unsigned long flags; unsigned int st; spin_lock_irqsave(&port->lock, flags); st = readl(port->membase + UART_STAT); spin_unlock_irqrestore(&port->lock, flags); return (st & STAT_TX_EMP) ? TIOCSER_TEMT : 0; } static unsigned int mvebu_uart_get_mctrl(struct uart_port *port) { return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; } static void mvebu_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { /* * Even if we do not support configuring the modem control lines, this * function must be proided to the serial core */ } static void mvebu_uart_stop_tx(struct uart_port *port) { unsigned int ctl = readl(port->membase + UART_INTR(port)); ctl &= ~CTRL_TX_RDY_INT(port); writel(ctl, port->membase + UART_INTR(port)); } static void mvebu_uart_start_tx(struct uart_port *port) { unsigned int ctl; struct circ_buf *xmit = &port->state->xmit; if (IS_EXTENDED(port) && !uart_circ_empty(xmit)) { writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port)); uart_xmit_advance(port, 1); } ctl = readl(port->membase + UART_INTR(port)); ctl |= CTRL_TX_RDY_INT(port); writel(ctl, port->membase + UART_INTR(port)); } static void mvebu_uart_stop_rx(struct uart_port *port) { unsigned int ctl; ctl = readl(port->membase + UART_CTRL(port)); ctl &= ~CTRL_BRK_INT; writel(ctl, port->membase + UART_CTRL(port)); ctl = readl(port->membase + UART_INTR(port)); ctl &= ~CTRL_RX_RDY_INT(port); writel(ctl, port->membase + UART_INTR(port)); } static void mvebu_uart_break_ctl(struct uart_port *port, int brk) { unsigned int ctl; unsigned long flags; spin_lock_irqsave(&port->lock, flags); ctl = readl(port->membase + UART_CTRL(port)); if (brk == -1) ctl |= CTRL_SND_BRK_SEQ; else ctl &= ~CTRL_SND_BRK_SEQ; writel(ctl, port->membase + UART_CTRL(port)); spin_unlock_irqrestore(&port->lock, flags); } static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status) { struct tty_port *tport = &port->state->port; unsigned char ch = 0; char flag = 0; int ret; do { if (status & STAT_RX_RDY(port)) { ch = readl(port->membase + UART_RBR(port)); ch &= 0xff; flag = TTY_NORMAL; port->icount.rx++; if (status & STAT_PAR_ERR) port->icount.parity++; } /* * For UART2, error bits are not cleared on buffer read. * This causes interrupt loop and system hang. */ if (IS_EXTENDED(port) && (status & STAT_BRK_ERR)) { ret = readl(port->membase + UART_STAT); ret |= STAT_BRK_ERR; writel(ret, port->membase + UART_STAT); } if (status & STAT_BRK_DET) { port->icount.brk++; status &= ~(STAT_FRM_ERR | STAT_PAR_ERR); if (uart_handle_break(port)) goto ignore_char; } if (status & STAT_OVR_ERR) port->icount.overrun++; if (status & STAT_FRM_ERR) port->icount.frame++; if (uart_handle_sysrq_char(port, ch)) goto ignore_char; if (status & port->ignore_status_mask & STAT_PAR_ERR) status &= ~STAT_RX_RDY(port); status &= port->read_status_mask; if (status & STAT_PAR_ERR) flag = TTY_PARITY; status &= ~port->ignore_status_mask; if (status & STAT_RX_RDY(port)) tty_insert_flip_char(tport, ch, flag); if (status & STAT_BRK_DET) tty_insert_flip_char(tport, 0, TTY_BREAK); if (status & STAT_FRM_ERR) tty_insert_flip_char(tport, 0, TTY_FRAME); if (status & STAT_OVR_ERR) tty_insert_flip_char(tport, 0, TTY_OVERRUN); ignore_char: status = readl(port->membase + UART_STAT); } while (status & (STAT_RX_RDY(port) | STAT_BRK_DET)); tty_flip_buffer_push(tport); } static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status) { u8 ch; uart_port_tx_limited(port, ch, port->fifosize, !(readl(port->membase + UART_STAT) & STAT_TX_FIFO_FUL), writel(ch, port->membase + UART_TSH(port)), ({})); } static irqreturn_t mvebu_uart_isr(int irq, void *dev_id) { struct uart_port *port = (struct uart_port *)dev_id; unsigned int st = readl(port->membase + UART_STAT); if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR | STAT_BRK_DET)) mvebu_uart_rx_chars(port, st); if (st & STAT_TX_RDY(port)) mvebu_uart_tx_chars(port, st); return IRQ_HANDLED; } static irqreturn_t mvebu_uart_rx_isr(int irq, void *dev_id) { struct uart_port *port = (struct uart_port *)dev_id; unsigned int st = readl(port->membase + UART_STAT); if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR | STAT_BRK_DET)) mvebu_uart_rx_chars(port, st); return IRQ_HANDLED; } static irqreturn_t mvebu_uart_tx_isr(int irq, void *dev_id) { struct uart_port *port = (struct uart_port *)dev_id; unsigned int st = readl(port->membase + UART_STAT); if (st & STAT_TX_RDY(port)) mvebu_uart_tx_chars(port, st); return IRQ_HANDLED; } static int mvebu_uart_startup(struct uart_port *port) { struct mvebu_uart *mvuart = to_mvuart(port); unsigned int ctl; int ret; writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST, port->membase + UART_CTRL(port)); udelay(1); /* Clear the error bits of state register before IRQ request */ ret = readl(port->membase + UART_STAT); ret |= STAT_BRK_ERR; writel(ret, port->membase + UART_STAT); writel(CTRL_BRK_INT, port->membase + UART_CTRL(port)); ctl = readl(port->membase + UART_INTR(port)); ctl |= CTRL_RX_RDY_INT(port); writel(ctl, port->membase + UART_INTR(port)); if (!mvuart->irq[UART_TX_IRQ]) { /* Old bindings with just one interrupt (UART0 only) */ ret = devm_request_irq(port->dev, mvuart->irq[UART_IRQ_SUM], mvebu_uart_isr, port->irqflags, dev_name(port->dev), port); if (ret) { dev_err(port->dev, "unable to request IRQ %d\n", mvuart->irq[UART_IRQ_SUM]); return ret; } } else { /* New bindings with an IRQ for RX and TX (both UART) */ ret = devm_request_irq(port->dev, mvuart->irq[UART_RX_IRQ], mvebu_uart_rx_isr, port->irqflags, dev_name(port->dev), port); if (ret) { dev_err(port->dev, "unable to request IRQ %d\n", mvuart->irq[UART_RX_IRQ]); return ret; } ret = devm_request_irq(port->dev, mvuart->irq[UART_TX_IRQ], mvebu_uart_tx_isr, port->irqflags, dev_name(port->dev), port); if (ret) { dev_err(port->dev, "unable to request IRQ %d\n", mvuart->irq[UART_TX_IRQ]); devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], port); return ret; } } return 0; } static void mvebu_uart_shutdown(struct uart_port *port) { struct mvebu_uart *mvuart = to_mvuart(port); writel(0, port->membase + UART_INTR(port)); if (!mvuart->irq[UART_TX_IRQ]) { devm_free_irq(port->dev, mvuart->irq[UART_IRQ_SUM], port); } else { devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], port); devm_free_irq(port->dev, mvuart->irq[UART_TX_IRQ], port); } } static unsigned int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) { unsigned int d_divisor, m_divisor; unsigned long flags; u32 brdv, osamp; if (!port->uartclk) return 0; /* * The baudrate is derived from the UART clock thanks to divisors: * > d1 * d2 ("TBG divisors"): can divide only TBG clock from 1 to 6 * > D ("baud generator"): can divide the clock from 1 to 1023 * > M ("fractional divisor"): allows a better accuracy (from 1 to 63) * * Exact formulas for calculating baudrate: * * with default x16 scheme: * baudrate = xtal / (d * 16) * baudrate = tbg / (d1 * d2 * d * 16) * * with fractional divisor: * baudrate = 10 * xtal / (d * (3 * (m1 + m2) + 2 * (m3 + m4))) * baudrate = 10 * tbg / (d1*d2 * d * (3 * (m1 + m2) + 2 * (m3 + m4))) * * Oversampling value: * osamp = (m1 << 0) | (m2 << 8) | (m3 << 16) | (m4 << 24); * * Where m1 controls number of clock cycles per bit for bits 1,2,3; * m2 for bits 4,5,6; m3 for bits 7,8 and m4 for bits 9,10. * * To simplify baudrate setup set all the M prescalers to the same * value. For baudrates 9600 Bd and higher, it is enough to use the * default (x16) divisor or fractional divisor with M = 63, so there * is no need to use real fractional support (where the M prescalers * are not equal). * * When all the M prescalers are zeroed then default (x16) divisor is * used. Default x16 scheme is more stable than M (fractional divisor), * so use M only when D divisor is not enough to derive baudrate. * * Member port->uartclk is either xtal clock rate or TBG clock rate * divided by (d1 * d2). So d1 and d2 are already set by the UART clock * driver (and UART driver itself cannot change them). Moreover they are * shared between both UARTs. */ m_divisor = OSAMP_DEFAULT_DIVISOR; d_divisor = DIV_ROUND_CLOSEST(port->uartclk, baud * m_divisor); if (d_divisor > BRDV_BAUD_MAX) { /* * Experiments show that small M divisors are unstable. * Use maximal possible M = 63 and calculate D divisor. */ m_divisor = OSAMP_MAX_DIVISOR; d_divisor = DIV_ROUND_CLOSEST(port->uartclk, baud * m_divisor); } if (d_divisor < 1) d_divisor = 1; else if (d_divisor > BRDV_BAUD_MAX) d_divisor = BRDV_BAUD_MAX; spin_lock_irqsave(&mvebu_uart_lock, flags); brdv = readl(port->membase + UART_BRDV); brdv &= ~BRDV_BAUD_MASK; brdv |= d_divisor; writel(brdv, port->membase + UART_BRDV); spin_unlock_irqrestore(&mvebu_uart_lock, flags); osamp = readl(port->membase + UART_OSAMP); osamp &= ~OSAMP_DIVISORS_MASK; if (m_divisor != OSAMP_DEFAULT_DIVISOR) osamp |= (m_divisor << 0) | (m_divisor << 8) | (m_divisor << 16) | (m_divisor << 24); writel(osamp, port->membase + UART_OSAMP); return DIV_ROUND_CLOSEST(port->uartclk, d_divisor * m_divisor); } static void mvebu_uart_set_termios(struct uart_port *port, struct ktermios *termios, const struct ktermios *old) { unsigned long flags; unsigned int baud, min_baud, max_baud; spin_lock_irqsave(&port->lock, flags); port->read_status_mask = STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_TX_RDY(port) | STAT_TX_FIFO_FUL; if (termios->c_iflag & INPCK) port->read_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR; port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) port->ignore_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR | STAT_OVR_ERR; if ((termios->c_cflag & CREAD) == 0) port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR; /* * Maximal divisor is 1023 and maximal fractional divisor is 63. And * experiments show that baudrates above 1/80 of parent clock rate are * not stable. So disallow baudrates above 1/80 of the parent clock * rate. If port->uartclk is not available, then * mvebu_uart_baud_rate_set() fails, so values min_baud and max_baud * in this case do not matter. */ min_baud = DIV_ROUND_UP(port->uartclk, BRDV_BAUD_MAX * OSAMP_MAX_DIVISOR); max_baud = port->uartclk / 80; baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud); baud = mvebu_uart_baud_rate_set(port, baud); /* In case baudrate cannot be changed, report previous old value */ if (baud == 0 && old) baud = tty_termios_baud_rate(old); /* Only the following flag changes are supported */ if (old) { termios->c_iflag &= INPCK | IGNPAR; termios->c_iflag |= old->c_iflag & ~(INPCK | IGNPAR); termios->c_cflag &= CREAD | CBAUD; termios->c_cflag |= old->c_cflag & ~(CREAD | CBAUD); termios->c_cflag |= CS8; } if (baud != 0) { tty_termios_encode_baud_rate(termios, baud, baud); uart_update_timeout(port, termios->c_cflag, baud); } spin_unlock_irqrestore(&port->lock, flags); } static const char *mvebu_uart_type(struct uart_port *port) { return MVEBU_UART_TYPE; } static void mvebu_uart_release_port(struct uart_port *port) { /* Nothing to do here */ } static int mvebu_uart_request_port(struct uart_port *port) { return 0; } #ifdef CONFIG_CONSOLE_POLL static int mvebu_uart_get_poll_char(struct uart_port *port) { unsigned int st = readl(port->membase + UART_STAT); if (!(st & STAT_RX_RDY(port))) return NO_POLL_CHAR; return readl(port->membase + UART_RBR(port)); } static void mvebu_uart_put_poll_char(struct uart_port *port, unsigned char c) { unsigned int st; for (;;) { st = readl(port->membase + UART_STAT); if (!(st & STAT_TX_FIFO_FUL)) break; udelay(1); } writel(c, port->membase + UART_TSH(port)); } #endif static const struct uart_ops mvebu_uart_ops = { .tx_empty = mvebu_uart_tx_empty, .set_mctrl = mvebu_uart_set_mctrl, .get_mctrl = mvebu_uart_get_mctrl, .stop_tx = mvebu_uart_stop_tx, .start_tx = mvebu_uart_start_tx, .stop_rx = mvebu_uart_stop_rx, .break_ctl = mvebu_uart_break_ctl, .startup = mvebu_uart_startup, .shutdown = mvebu_uart_shutdown, .set_termios = mvebu_uart_set_termios, .type = mvebu_uart_type, .release_port = mvebu_uart_release_port, .request_port = mvebu_uart_request_port, #ifdef CONFIG_CONSOLE_POLL .poll_get_char = mvebu_uart_get_poll_char, .poll_put_char = mvebu_uart_put_poll_char, #endif }; /* Console Driver Operations */ #ifdef CONFIG_SERIAL_MVEBU_CONSOLE /* Early Console */ static void mvebu_uart_putc(struct uart_port *port, unsigned char c) { unsigned int st; for (;;) { st = readl(port->membase + UART_STAT); if (!(st & STAT_TX_FIFO_FUL)) break; } /* At early stage, DT is not parsed yet, only use UART0 */ writel(c, port->membase + UART_STD_TSH); for (;;) { st = readl(port->membase + UART_STAT); if (st & STAT_TX_FIFO_EMP) break; } } static void mvebu_uart_putc_early_write(struct console *con, const char *s, unsigned int n) { struct earlycon_device *dev = con->data; uart_console_write(&dev->port, s, n, mvebu_uart_putc); } static int __init mvebu_uart_early_console_setup(struct earlycon_device *device, const char *opt) { if (!device->port.membase) return -ENODEV; device->con->write = mvebu_uart_putc_early_write; return 0; } EARLYCON_DECLARE(ar3700_uart, mvebu_uart_early_console_setup); OF_EARLYCON_DECLARE(ar3700_uart, "marvell,armada-3700-uart", mvebu_uart_early_console_setup); static void wait_for_xmitr(struct uart_port *port) { u32 val; readl_poll_timeout_atomic(port->membase + UART_STAT, val, (val & STAT_TX_RDY(port)), 1, 10000); } static void wait_for_xmite(struct uart_port *port) { u32 val; readl_poll_timeout_atomic(port->membase + UART_STAT, val, (val & STAT_TX_EMP), 1, 10000); } static void mvebu_uart_console_putchar(struct uart_port *port, unsigned char ch) { wait_for_xmitr(port); writel(ch, port->membase + UART_TSH(port)); } static void mvebu_uart_console_write(struct console *co, const char *s, unsigned int count) { struct uart_port *port = &mvebu_uart_ports[co->index]; unsigned long flags; unsigned int ier, intr, ctl; int locked = 1; if (oops_in_progress) locked = spin_trylock_irqsave(&port->lock, flags); else spin_lock_irqsave(&port->lock, flags); ier = readl(port->membase + UART_CTRL(port)) & CTRL_BRK_INT; intr = readl(port->membase + UART_INTR(port)) & (CTRL_RX_RDY_INT(port) | CTRL_TX_RDY_INT(port)); writel(0, port->membase + UART_CTRL(port)); writel(0, port->membase + UART_INTR(port)); uart_console_write(port, s, count, mvebu_uart_console_putchar); wait_for_xmite(port); if (ier) writel(ier, port->membase + UART_CTRL(port)); if (intr) { ctl = intr | readl(port->membase + UART_INTR(port)); writel(ctl, port->membase + UART_INTR(port)); } if (locked) spin_unlock_irqrestore(&port->lock, flags); } static int mvebu_uart_console_setup(struct console *co, char *options) { struct uart_port *port; int baud = 9600; int bits = 8; int parity = 'n'; int flow = 'n'; if (co->index < 0 || co->index >= MVEBU_NR_UARTS) return -EINVAL; port = &mvebu_uart_ports[co->index]; if (!port->mapbase || !port->membase) { pr_debug("console on ttyMV%i not present\n", co->index); return -ENODEV; } if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); return uart_set_options(port, co, baud, parity, bits, flow); } static struct uart_driver mvebu_uart_driver; static struct console mvebu_uart_console = { .name = "ttyMV", .write = mvebu_uart_console_write, .device = uart_console_device, .setup = mvebu_uart_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &mvebu_uart_driver, }; static int __init mvebu_uart_console_init(void) { register_console(&mvebu_uart_console); return 0; } console_initcall(mvebu_uart_console_init); #endif /* CONFIG_SERIAL_MVEBU_CONSOLE */ static struct uart_driver mvebu_uart_driver = { .owner = THIS_MODULE, .driver_name = DRIVER_NAME, .dev_name = "ttyMV", .nr = MVEBU_NR_UARTS, #ifdef CONFIG_SERIAL_MVEBU_CONSOLE .cons = &mvebu_uart_console, #endif }; #if defined(CONFIG_PM) static int mvebu_uart_suspend(struct device *dev) { struct mvebu_uart *mvuart = dev_get_drvdata(dev); struct uart_port *port = mvuart->port; unsigned long flags; uart_suspend_port(&mvebu_uart_driver, port); mvuart->pm_regs.rbr = readl(port->membase + UART_RBR(port)); mvuart->pm_regs.tsh = readl(port->membase + UART_TSH(port)); mvuart->pm_regs.ctrl = readl(port->membase + UART_CTRL(port)); mvuart->pm_regs.intr = readl(port->membase + UART_INTR(port)); mvuart->pm_regs.stat = readl(port->membase + UART_STAT); spin_lock_irqsave(&mvebu_uart_lock, flags); mvuart->pm_regs.brdv = readl(port->membase + UART_BRDV); spin_unlock_irqrestore(&mvebu_uart_lock, flags); mvuart->pm_regs.osamp = readl(port->membase + UART_OSAMP); device_set_wakeup_enable(dev, true); return 0; } static int mvebu_uart_resume(struct device *dev) { struct mvebu_uart *mvuart = dev_get_drvdata(dev); struct uart_port *port = mvuart->port; unsigned long flags; writel(mvuart->pm_regs.rbr, port->membase + UART_RBR(port)); writel(mvuart->pm_regs.tsh, port->membase + UART_TSH(port)); writel(mvuart->pm_regs.ctrl, port->membase + UART_CTRL(port)); writel(mvuart->pm_regs.intr, port->membase + UART_INTR(port)); writel(mvuart->pm_regs.stat, port->membase + UART_STAT); spin_lock_irqsave(&mvebu_uart_lock, flags); writel(mvuart->pm_regs.brdv, port->membase + UART_BRDV); spin_unlock_irqrestore(&mvebu_uart_lock, flags); writel(mvuart->pm_regs.osamp, port->membase + UART_OSAMP); uart_resume_port(&mvebu_uart_driver, port); return 0; } static const struct dev_pm_ops mvebu_uart_pm_ops = { .suspend = mvebu_uart_suspend, .resume = mvebu_uart_resume, }; #endif /* CONFIG_PM */ static const struct of_device_id mvebu_uart_of_match[]; /* Counter to keep track of each UART port id when not using CONFIG_OF */ static int uart_num_counter; static int mvebu_uart_probe(struct platform_device *pdev) { struct resource *reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); const struct of_device_id *match = of_match_device(mvebu_uart_of_match, &pdev->dev); struct uart_port *port; struct mvebu_uart *mvuart; int id, irq; if (!reg) { dev_err(&pdev->dev, "no registers defined\n"); return -EINVAL; } /* Assume that all UART ports have a DT alias or none has */ id = of_alias_get_id(pdev->dev.of_node, "serial"); if (!pdev->dev.of_node || id < 0) pdev->id = uart_num_counter++; else pdev->id = id; if (pdev->id >= MVEBU_NR_UARTS) { dev_err(&pdev->dev, "cannot have more than %d UART ports\n", MVEBU_NR_UARTS); return -EINVAL; } port = &mvebu_uart_ports[pdev->id]; spin_lock_init(&port->lock); port->dev = &pdev->dev; port->type = PORT_MVEBU; port->ops = &mvebu_uart_ops; port->regshift = 0; port->fifosize = 32; port->iotype = UPIO_MEM32; port->flags = UPF_FIXED_PORT; port->line = pdev->id; /* * IRQ number is not stored in this structure because we may have two of * them per port (RX and TX). Instead, use the driver UART structure * array so called ->irq[]. */ port->irq = 0; port->irqflags = 0; port->mapbase = reg->start; port->membase = devm_ioremap_resource(&pdev->dev, reg); if (IS_ERR(port->membase)) return PTR_ERR(port->membase); mvuart = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart), GFP_KERNEL); if (!mvuart) return -ENOMEM; /* Get controller data depending on the compatible string */ mvuart->data = (struct mvebu_uart_driver_data *)match->data; mvuart->port = port; port->private_data = mvuart; platform_set_drvdata(pdev, mvuart); /* Get fixed clock frequency */ mvuart->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(mvuart->clk)) { if (PTR_ERR(mvuart->clk) == -EPROBE_DEFER) return PTR_ERR(mvuart->clk); if (IS_EXTENDED(port)) { dev_err(&pdev->dev, "unable to get UART clock\n"); return PTR_ERR(mvuart->clk); } } else { if (!clk_prepare_enable(mvuart->clk)) port->uartclk = clk_get_rate(mvuart->clk); } /* Manage interrupts */ if (platform_irq_count(pdev) == 1) { /* Old bindings: no name on the single unamed UART0 IRQ */ irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; mvuart->irq[UART_IRQ_SUM] = irq; } else { /* * New bindings: named interrupts (RX, TX) for both UARTS, * only make use of uart-rx and uart-tx interrupts, do not use * uart-sum of UART0 port. */ irq = platform_get_irq_byname(pdev, "uart-rx"); if (irq < 0) return irq; mvuart->irq[UART_RX_IRQ] = irq; irq = platform_get_irq_byname(pdev, "uart-tx"); if (irq < 0) return irq; mvuart->irq[UART_TX_IRQ] = irq; } /* UART Soft Reset*/ writel(CTRL_SOFT_RST, port->membase + UART_CTRL(port)); udelay(1); writel(0, port->membase + UART_CTRL(port)); return uart_add_one_port(&mvebu_uart_driver, port); } static struct mvebu_uart_driver_data uart_std_driver_data = { .is_ext = false, .regs.rbr = UART_STD_RBR, .regs.tsh = UART_STD_TSH, .regs.ctrl = UART_STD_CTRL1, .regs.intr = UART_STD_CTRL2, .flags.ctrl_tx_rdy_int = CTRL_STD_TX_RDY_INT, .flags.ctrl_rx_rdy_int = CTRL_STD_RX_RDY_INT, .flags.stat_tx_rdy = STAT_STD_TX_RDY, .flags.stat_rx_rdy = STAT_STD_RX_RDY, }; static struct mvebu_uart_driver_data uart_ext_driver_data = { .is_ext = true, .regs.rbr = UART_EXT_RBR, .regs.tsh = UART_EXT_TSH, .regs.ctrl = UART_EXT_CTRL1, .regs.intr = UART_EXT_CTRL2, .flags.ctrl_tx_rdy_int = CTRL_EXT_TX_RDY_INT, .flags.ctrl_rx_rdy_int = CTRL_EXT_RX_RDY_INT, .flags.stat_tx_rdy = STAT_EXT_TX_RDY, .flags.stat_rx_rdy = STAT_EXT_RX_RDY, }; /* Match table for of_platform binding */ static const struct of_device_id mvebu_uart_of_match[] = { { .compatible = "marvell,armada-3700-uart", .data = (void *)&uart_std_driver_data, }, { .compatible = "marvell,armada-3700-uart-ext", .data = (void *)&uart_ext_driver_data, }, {} }; static struct platform_driver mvebu_uart_platform_driver = { .probe = mvebu_uart_probe, .driver = { .name = "mvebu-uart", .of_match_table = of_match_ptr(mvebu_uart_of_match), .suppress_bind_attrs = true, #if defined(CONFIG_PM) .pm = &mvebu_uart_pm_ops, #endif /* CONFIG_PM */ }, }; /* This code is based on clk-fixed-factor.c driver and modified. */ struct mvebu_uart_clock { struct clk_hw clk_hw; int clock_idx; u32 pm_context_reg1; u32 pm_context_reg2; }; struct mvebu_uart_clock_base { struct mvebu_uart_clock clocks[2]; unsigned int parent_rates[5]; int parent_idx; unsigned int div; void __iomem *reg1; void __iomem *reg2; bool configured; }; #define PARENT_CLOCK_XTAL 4 #define to_uart_clock(hw) container_of(hw, struct mvebu_uart_clock, clk_hw) #define to_uart_clock_base(uart_clock) container_of(uart_clock, \ struct mvebu_uart_clock_base, clocks[uart_clock->clock_idx]) static int mvebu_uart_clock_prepare(struct clk_hw *hw) { struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); struct mvebu_uart_clock_base *uart_clock_base = to_uart_clock_base(uart_clock); unsigned int prev_clock_idx, prev_clock_rate, prev_d1d2; unsigned int parent_clock_idx, parent_clock_rate; unsigned long flags; unsigned int d1, d2; u64 divisor; u32 val; /* * This function just reconfigures UART Clock Control register (located * in UART1 address space which controls both UART1 and UART2) to * selected UART base clock and recalculates current UART1/UART2 * divisors in their address spaces, so that final baudrate will not be * changed by switching UART parent clock. This is required for * otherwise kernel's boot log stops working - we need to ensure that * UART baudrate does not change during this setup. It is a one time * operation, it will execute only once and set `configured` to true, * and be skipped on subsequent calls. Because this UART Clock Control * register (UART_BRDV) is shared between UART1 baudrate function, * UART1 clock selector and UART2 clock selector, every access to * UART_BRDV (reg1) needs to be protected by a lock. */ spin_lock_irqsave(&mvebu_uart_lock, flags); if (uart_clock_base->configured) { spin_unlock_irqrestore(&mvebu_uart_lock, flags); return 0; } parent_clock_idx = uart_clock_base->parent_idx; parent_clock_rate = uart_clock_base->parent_rates[parent_clock_idx]; val = readl(uart_clock_base->reg1); if (uart_clock_base->div > CLK_TBG_DIV1_MAX) { d1 = CLK_TBG_DIV1_MAX; d2 = uart_clock_base->div / CLK_TBG_DIV1_MAX; } else { d1 = uart_clock_base->div; d2 = 1; } if (val & CLK_NO_XTAL) { prev_clock_idx = (val >> CLK_TBG_SEL_SHIFT) & CLK_TBG_SEL_MASK; prev_d1d2 = ((val >> CLK_TBG_DIV1_SHIFT) & CLK_TBG_DIV1_MASK) * ((val >> CLK_TBG_DIV2_SHIFT) & CLK_TBG_DIV2_MASK); } else { prev_clock_idx = PARENT_CLOCK_XTAL; prev_d1d2 = 1; } /* Note that uart_clock_base->parent_rates[i] may not be available */ prev_clock_rate = uart_clock_base->parent_rates[prev_clock_idx]; /* Recalculate UART1 divisor so UART1 baudrate does not change */ if (prev_clock_rate) { divisor = DIV_U64_ROUND_CLOSEST((u64)(val & BRDV_BAUD_MASK) * parent_clock_rate * prev_d1d2, prev_clock_rate * d1 * d2); if (divisor < 1) divisor = 1; else if (divisor > BRDV_BAUD_MAX) divisor = BRDV_BAUD_MAX; val = (val & ~BRDV_BAUD_MASK) | divisor; } if (parent_clock_idx != PARENT_CLOCK_XTAL) { /* Do not use XTAL, select TBG clock and TBG d1 * d2 divisors */ val |= CLK_NO_XTAL; val &= ~(CLK_TBG_DIV1_MASK << CLK_TBG_DIV1_SHIFT); val |= d1 << CLK_TBG_DIV1_SHIFT; val &= ~(CLK_TBG_DIV2_MASK << CLK_TBG_DIV2_SHIFT); val |= d2 << CLK_TBG_DIV2_SHIFT; val &= ~(CLK_TBG_SEL_MASK << CLK_TBG_SEL_SHIFT); val |= parent_clock_idx << CLK_TBG_SEL_SHIFT; } else { /* Use XTAL, TBG bits are then ignored */ val &= ~CLK_NO_XTAL; } writel(val, uart_clock_base->reg1); /* Recalculate UART2 divisor so UART2 baudrate does not change */ if (prev_clock_rate) { val = readl(uart_clock_base->reg2); divisor = DIV_U64_ROUND_CLOSEST((u64)(val & BRDV_BAUD_MASK) * parent_clock_rate * prev_d1d2, prev_clock_rate * d1 * d2); if (divisor < 1) divisor = 1; else if (divisor > BRDV_BAUD_MAX) divisor = BRDV_BAUD_MAX; val = (val & ~BRDV_BAUD_MASK) | divisor; writel(val, uart_clock_base->reg2); } uart_clock_base->configured = true; spin_unlock_irqrestore(&mvebu_uart_lock, flags); return 0; } static int mvebu_uart_clock_enable(struct clk_hw *hw) { struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); struct mvebu_uart_clock_base *uart_clock_base = to_uart_clock_base(uart_clock); unsigned long flags; u32 val; spin_lock_irqsave(&mvebu_uart_lock, flags); val = readl(uart_clock_base->reg1); if (uart_clock->clock_idx == 0) val &= ~UART1_CLK_DIS; else val &= ~UART2_CLK_DIS; writel(val, uart_clock_base->reg1); spin_unlock_irqrestore(&mvebu_uart_lock, flags); return 0; } static void mvebu_uart_clock_disable(struct clk_hw *hw) { struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); struct mvebu_uart_clock_base *uart_clock_base = to_uart_clock_base(uart_clock); unsigned long flags; u32 val; spin_lock_irqsave(&mvebu_uart_lock, flags); val = readl(uart_clock_base->reg1); if (uart_clock->clock_idx == 0) val |= UART1_CLK_DIS; else val |= UART2_CLK_DIS; writel(val, uart_clock_base->reg1); spin_unlock_irqrestore(&mvebu_uart_lock, flags); } static int mvebu_uart_clock_is_enabled(struct clk_hw *hw) { struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); struct mvebu_uart_clock_base *uart_clock_base = to_uart_clock_base(uart_clock); u32 val; val = readl(uart_clock_base->reg1); if (uart_clock->clock_idx == 0) return !(val & UART1_CLK_DIS); else return !(val & UART2_CLK_DIS); } static int mvebu_uart_clock_save_context(struct clk_hw *hw) { struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); struct mvebu_uart_clock_base *uart_clock_base = to_uart_clock_base(uart_clock); unsigned long flags; spin_lock_irqsave(&mvebu_uart_lock, flags); uart_clock->pm_context_reg1 = readl(uart_clock_base->reg1); uart_clock->pm_context_reg2 = readl(uart_clock_base->reg2); spin_unlock_irqrestore(&mvebu_uart_lock, flags); return 0; } static void mvebu_uart_clock_restore_context(struct clk_hw *hw) { struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); struct mvebu_uart_clock_base *uart_clock_base = to_uart_clock_base(uart_clock); unsigned long flags; spin_lock_irqsave(&mvebu_uart_lock, flags); writel(uart_clock->pm_context_reg1, uart_clock_base->reg1); writel(uart_clock->pm_context_reg2, uart_clock_base->reg2); spin_unlock_irqrestore(&mvebu_uart_lock, flags); } static unsigned long mvebu_uart_clock_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); struct mvebu_uart_clock_base *uart_clock_base = to_uart_clock_base(uart_clock); return parent_rate / uart_clock_base->div; } static long mvebu_uart_clock_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { struct mvebu_uart_clock *uart_clock = to_uart_clock(hw); struct mvebu_uart_clock_base *uart_clock_base = to_uart_clock_base(uart_clock); return *parent_rate / uart_clock_base->div; } static int mvebu_uart_clock_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { /* * We must report success but we can do so unconditionally because * mvebu_uart_clock_round_rate returns values that ensure this call is a * nop. */ return 0; } static const struct clk_ops mvebu_uart_clock_ops = { .prepare = mvebu_uart_clock_prepare, .enable = mvebu_uart_clock_enable, .disable = mvebu_uart_clock_disable, .is_enabled = mvebu_uart_clock_is_enabled, .save_context = mvebu_uart_clock_save_context, .restore_context = mvebu_uart_clock_restore_context, .round_rate = mvebu_uart_clock_round_rate, .set_rate = mvebu_uart_clock_set_rate, .recalc_rate = mvebu_uart_clock_recalc_rate, }; static int mvebu_uart_clock_register(struct device *dev, struct mvebu_uart_clock *uart_clock, const char *name, const char *parent_name) { struct clk_init_data init = { }; uart_clock->clk_hw.init = &init; init.name = name; init.ops = &mvebu_uart_clock_ops; init.flags = 0; init.num_parents = 1; init.parent_names = &parent_name; return devm_clk_hw_register(dev, &uart_clock->clk_hw); } static int mvebu_uart_clock_probe(struct platform_device *pdev) { static const char *const uart_clk_names[] = { "uart_1", "uart_2" }; static const char *const parent_clk_names[] = { "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal" }; struct clk *parent_clks[ARRAY_SIZE(parent_clk_names)]; struct mvebu_uart_clock_base *uart_clock_base; struct clk_hw_onecell_data *hw_clk_data; struct device *dev = &pdev->dev; int i, parent_clk_idx, ret; unsigned long div, rate; struct resource *res; unsigned int d1, d2; BUILD_BUG_ON(ARRAY_SIZE(uart_clk_names) != ARRAY_SIZE(uart_clock_base->clocks)); BUILD_BUG_ON(ARRAY_SIZE(parent_clk_names) != ARRAY_SIZE(uart_clock_base->parent_rates)); uart_clock_base = devm_kzalloc(dev, sizeof(*uart_clock_base), GFP_KERNEL); if (!uart_clock_base) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "Couldn't get first register\n"); return -ENOENT; } /* * UART Clock Control register (reg1 / UART_BRDV) is in the address * space of UART1 (standard UART variant), controls parent clock and * dividers for both UART1 and UART2 and is supplied via DT as the first * resource. Therefore use ioremap() rather than ioremap_resource() to * avoid conflicts with UART1 driver. Access to UART_BRDV is protected * by a lock shared between clock and UART driver. */ uart_clock_base->reg1 = devm_ioremap(dev, res->start, resource_size(res)); if (!uart_clock_base->reg1) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!res) { dev_err(dev, "Couldn't get second register\n"); return -ENOENT; } /* * UART 2 Baud Rate Divisor register (reg2 / UART_BRDV) is in address * space of UART2 (extended UART variant), controls only one UART2 * specific divider and is supplied via DT as second resource. * Therefore use ioremap() rather than ioremap_resource() to avoid * conflicts with UART2 driver. Access to UART_BRDV is protected by a * by lock shared between clock and UART driver. */ uart_clock_base->reg2 = devm_ioremap(dev, res->start, resource_size(res)); if (!uart_clock_base->reg2) return -ENOMEM; hw_clk_data = devm_kzalloc(dev, struct_size(hw_clk_data, hws, ARRAY_SIZE(uart_clk_names)), GFP_KERNEL); if (!hw_clk_data) return -ENOMEM; hw_clk_data->num = ARRAY_SIZE(uart_clk_names); for (i = 0; i < ARRAY_SIZE(uart_clk_names); i++) { hw_clk_data->hws[i] = &uart_clock_base->clocks[i].clk_hw; uart_clock_base->clocks[i].clock_idx = i; } parent_clk_idx = -1; for (i = 0; i < ARRAY_SIZE(parent_clk_names); i++) { parent_clks[i] = devm_clk_get(dev, parent_clk_names[i]); if (IS_ERR(parent_clks[i])) { if (PTR_ERR(parent_clks[i]) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_warn(dev, "Couldn't get the parent clock %s: %ld\n", parent_clk_names[i], PTR_ERR(parent_clks[i])); continue; } ret = clk_prepare_enable(parent_clks[i]); if (ret) { dev_warn(dev, "Couldn't enable parent clock %s: %d\n", parent_clk_names[i], ret); continue; } rate = clk_get_rate(parent_clks[i]); uart_clock_base->parent_rates[i] = rate; if (i != PARENT_CLOCK_XTAL) { /* * Calculate the smallest TBG d1 and d2 divisors that * still can provide 9600 baudrate. */ d1 = DIV_ROUND_UP(rate, 9600 * OSAMP_MAX_DIVISOR * BRDV_BAUD_MAX); if (d1 < 1) d1 = 1; else if (d1 > CLK_TBG_DIV1_MAX) d1 = CLK_TBG_DIV1_MAX; d2 = DIV_ROUND_UP(rate, 9600 * OSAMP_MAX_DIVISOR * BRDV_BAUD_MAX * d1); if (d2 < 1) d2 = 1; else if (d2 > CLK_TBG_DIV2_MAX) d2 = CLK_TBG_DIV2_MAX; } else { /* * When UART clock uses XTAL clock as a source then it * is not possible to use d1 and d2 divisors. */ d1 = d2 = 1; } /* Skip clock source which cannot provide 9600 baudrate */ if (rate > 9600 * OSAMP_MAX_DIVISOR * BRDV_BAUD_MAX * d1 * d2) continue; /* * Choose TBG clock source with the smallest divisors. Use XTAL * clock source only in case TBG is not available as XTAL cannot * be used for baudrates higher than 230400. */ if (parent_clk_idx == -1 || (i != PARENT_CLOCK_XTAL && div > d1 * d2)) { parent_clk_idx = i; div = d1 * d2; } } for (i = 0; i < ARRAY_SIZE(parent_clk_names); i++) { if (i == parent_clk_idx || IS_ERR(parent_clks[i])) continue; clk_disable_unprepare(parent_clks[i]); devm_clk_put(dev, parent_clks[i]); } if (parent_clk_idx == -1) { dev_err(dev, "No usable parent clock\n"); return -ENOENT; } uart_clock_base->parent_idx = parent_clk_idx; uart_clock_base->div = div; dev_notice(dev, "Using parent clock %s as base UART clock\n", __clk_get_name(parent_clks[parent_clk_idx])); for (i = 0; i < ARRAY_SIZE(uart_clk_names); i++) { ret = mvebu_uart_clock_register(dev, &uart_clock_base->clocks[i], uart_clk_names[i], __clk_get_name(parent_clks[parent_clk_idx])); if (ret) { dev_err(dev, "Can't register UART clock %d: %d\n", i, ret); return ret; } } return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, hw_clk_data); } static const struct of_device_id mvebu_uart_clock_of_match[] = { { .compatible = "marvell,armada-3700-uart-clock", }, { } }; static struct platform_driver mvebu_uart_clock_platform_driver = { .probe = mvebu_uart_clock_probe, .driver = { .name = "mvebu-uart-clock", .of_match_table = mvebu_uart_clock_of_match, }, }; static int __init mvebu_uart_init(void) { int ret; ret = uart_register_driver(&mvebu_uart_driver); if (ret) return ret; ret = platform_driver_register(&mvebu_uart_clock_platform_driver); if (ret) { uart_unregister_driver(&mvebu_uart_driver); return ret; } ret = platform_driver_register(&mvebu_uart_platform_driver); if (ret) { platform_driver_unregister(&mvebu_uart_clock_platform_driver); uart_unregister_driver(&mvebu_uart_driver); return ret; } return 0; } arch_initcall(mvebu_uart_init);