/* * Copyright (C) 2016-2017 Zodiac Inflight Innovations * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include #include / { chosen { stdout-path = &uart1; }; aliases { mdio-gpio0 = &mdio1; rtc0 = &ds1341; }; mdio1: mdio { compatible = "virtual,mdio-gpio"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mdio1>; gpios = <&gpio6 5 GPIO_ACTIVE_HIGH &gpio6 4 GPIO_ACTIVE_HIGH>; phy: ethernet-phy@0 { pinctrl-0 = <&pinctrl_rmii_phy_irq>; pinctrl-names = "default"; reg = <0>; interrupt-parent = <&gpio3>; interrupts = <30 IRQ_TYPE_LEVEL_LOW>; }; }; reg_28p0v: regulator-28p0v { compatible = "regulator-fixed"; regulator-name = "28V_IN"; regulator-min-microvolt = <28000000>; regulator-max-microvolt = <28000000>; regulator-always-on; }; reg_12p0v: regulator-12p0v { compatible = "regulator-fixed"; vin-supply = <®_28p0v>; regulator-name = "12V_MAIN"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; regulator-always-on; }; reg_5p0v_main: regulator-5p0v-main { compatible = "regulator-fixed"; vin-supply = <®_12p0v>; regulator-name = "5V_MAIN"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; reg_5p0v_user_usb: regulator-5p0v-user-usb { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_user_usb>; vin-supply = <®_5p0v_main>; regulator-name = "5V_USER_USB"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; startup-delay-us = <1000>; }; reg_3p3v_pmic: regulator-3p3v-pmic { compatible = "regulator-fixed"; vin-supply = <®_12p0v>; regulator-name = "PMIC_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; vin-supply = <®_3p3v_pmic>; regulator-name = "GEN_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_3p3v_sd: regulator-3p3v-sd { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_3p3v_sd>; vin-supply = <®_3p3v>; regulator-name = "3V3_SD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; startup-delay-us = <1000>; enable-active-high; regulator-always-on; }; reg_3p3v_display: regulator-3p3v-display { compatible = "regulator-fixed"; vin-supply = <®_12p0v>; regulator-name = "3V3_DISPLAY"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_3p3v_ssd: regulator-3p3v-ssd { compatible = "regulator-fixed"; vin-supply = <®_12p0v>; regulator-name = "3V3_SSD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; sound1 { compatible = "simple-audio-card"; simple-audio-card,name = "Front"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound1_codec>; simple-audio-card,frame-master = <&sound1_codec>; simple-audio-card,widgets = "Headphone", "Headphone Jack"; simple-audio-card,routing = "Headphone Jack", "HPLEFT", "Headphone Jack", "HPRIGHT", "LEFTIN", "HPL", "RIGHTIN", "HPR"; simple-audio-card,aux-devs = <&hpa1>; sound1_cpu: simple-audio-card,cpu { sound-dai = <&ssi2>; }; sound1_codec: simple-audio-card,codec { sound-dai = <&codec1>; clocks = <&cs2000>; }; }; sound2 { compatible = "simple-audio-card"; simple-audio-card,name = "Back"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound2_codec>; simple-audio-card,frame-master = <&sound2_codec>; simple-audio-card,widgets = "Headphone", "Headphone Jack"; simple-audio-card,routing = "Headphone Jack", "HPLEFT", "Headphone Jack", "HPRIGHT", "LEFTIN", "HPL", "RIGHTIN", "HPR"; simple-audio-card,aux-devs = <&hpa2>; sound2_cpu: simple-audio-card,cpu { sound-dai = <&ssi1>; }; sound2_codec: simple-audio-card,codec { sound-dai = <&codec2>; clocks = <&cs2000>; }; }; panel { power-supply = <®_3p3v_display>; status = "disabled"; port { panel_in: endpoint { remote-endpoint = <&lvds0_out>; }; }; }; disp0: disp0 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx-parallel-display"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_disp0>; status = "disabled"; port@0 { reg = <0>; disp0_in_0: endpoint { remote-endpoint = <&ipu1_di0_disp0>; }; }; port@1 { reg = <1>; disp0_out: endpoint { remote-endpoint = <&tc358767_in>; }; }; }; cs2000_ref: cs2000-ref { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; }; cs2000_in_dummy: cs2000-in-dummy { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; edp_refclk: edp-refclk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; }; }; &cpu0 { fsl,soc-operating-points = < /* ARM kHz SOC-PU uV */ 1200000 1300000 996000 1275000 852000 1275000 792000 1200000 396000 1200000 >; }; ®_arm { vin-supply = <&sw1a_reg>; }; ®_pu { vin-supply = <&sw1c_reg>; }; ®_soc { vin-supply = <&sw1c_reg>; }; &ldb { lvds-channel@0 { port@4 { reg = <4>; lvds0_out: endpoint { remote-endpoint = <&panel_in>; }; }; }; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; uart-has-rtscts; linux,rs485-enabled-at-boot-time; status = "okay"; }; &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; status = "okay"; rave-sp { compatible = "zii,rave-sp-rdu2"; current-speed = <1000000>; #address-cells = <1>; #size-cells = <1>; watchdog { compatible = "zii,rave-sp-watchdog"; }; eeprom@a3 { compatible = "zii,rave-sp-eeprom"; reg = <0xa3 0x4000>; #address-cells = <1>; #size-cells = <1>; zii,eeprom-name = "dds-eeprom"; }; eeprom@a4 { compatible = "zii,rave-sp-eeprom"; reg = <0xa4 0x4000>; #address-cells = <1>; #size-cells = <1>; zii,eeprom-name = "main-eeprom"; }; }; }; &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; status = "okay"; flash@0 { compatible = "st,m25p128", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; }; &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clock-frequency = <100000>; status = "okay"; codec2: codec@18 { compatible = "ti,tlv320dac3100"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_codec2>; reg = <0x18>; #sound-dai-cells = <0>; HPVDD-supply = <®_3p3v>; SPRVDD-supply = <®_3p3v>; SPLVDD-supply = <®_3p3v>; AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; accel@1c { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_accel>; compatible = "fsl,mma8451"; reg = <0x1c>; interrupt-parent = <&gpio1>; interrupt-names = "int1", "int2"; interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>; }; hpa2: amp@60 { compatible = "ti,tpa6130a2"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tpa2>; reg = <0x60>; power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; Vdd-supply = <®_5p0v_main>; }; edp-bridge@68 { compatible = "toshiba,tc358767"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tc358767>; reg = <0x68>; shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; clock-names = "ref"; clocks = <&edp_refclk>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@1 { reg = <1>; tc358767_in: endpoint { remote-endpoint = <&disp0_out>; }; }; }; }; }; &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clock-frequency = <100000>; status = "okay"; pmic@8 { compatible = "fsl,pfuze100"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pfuze100_irq>; reg = <0x08>; interrupt-parent = <&gpio7>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; regulators { sw1a_reg: sw1ab { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw2_reg: sw2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3000000>; regulator-boot-on; regulator-always-on; }; sw3a_reg: sw3a { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; sw3b_reg: sw3b { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; snvs_reg: vsnvs { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; regulator-boot-on; regulator-always-on; }; vref_reg: vrefddr { regulator-boot-on; regulator-always-on; }; vgen2_reg: vgen2 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; vgen4_reg: vgen4 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; vgen5_reg: vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; vgen6_reg: vgen6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; }; }; temp-sense@48 { compatible = "national,lm75"; reg = <0x48>; }; cs2000: clkgen@4e { compatible = "cirrus,cs2000-cp"; reg = <0x4e>; #clock-cells = <0>; clock-names = "clk_in", "ref_clk"; clocks = <&cs2000_in_dummy>, <&cs2000_ref>; assigned-clocks = <&cs2000>; assigned-clock-rates = <24000000>; }; eeprom@54 { compatible = "atmel,24c128"; reg = <0x54>; }; ds1341: rtc@68 { compatible = "dallas,ds1341"; reg = <0x68>; }; }; &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clock-frequency = <400000>; status = "okay"; codec1: codec@18 { compatible = "ti,tlv320dac3100"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_codec1>; reg = <0x18>; #sound-dai-cells = <0>; HPVDD-supply = <®_3p3v>; SPRVDD-supply = <®_3p3v>; SPLVDD-supply = <®_3p3v>; AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>; }; touchscreen@20 { compatible = "syna,rmi4-i2c"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ts>; reg = <0x20>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <®_5p0v_main>; vio-supply = <®_3p3v>; #address-cells = <1>; #size-cells = <0>; rmi4-f01@1 { reg = <0x1>; syna,nosleep-mode = <2>; }; rmi4-f11@11 { reg = <0x11>; touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; rmi4-f12@12 { reg = <0x12>; touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; }; touchscreen@2a { compatible = "eeti,egalax_ts"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ts>; reg = <0x2a>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; wakeup-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; status = "disabled"; }; hpa1: amp@60 { compatible = "ti,tpa6130a2"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tpa1>; reg = <0x60>; power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; Vdd-supply = <®_5p0v_main>; }; }; &ipu1_di0_disp0 { remote-endpoint = <&disp0_in_0>; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; status = "okay"; host@0 { reg = <0 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; i210: i210@0 { reg = <0 0 0 0 0>; }; }; }; &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; no-sdio; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; no-sdio; status = "okay"; }; &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; vmmc-supply = <®_3p3v>; vqmmc-supply = <®_3p3v>; no-1-8-v; non-removable; no-sdio; no-sd; status = "okay"; }; &sata { target-supply = <®_3p3v_ssd>; status = "okay"; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; phy-handle = <&phy>; phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; phy-supply = <®_3p3v>; status = "okay"; mdio { #address-cells = <1>; #size-cells = <0>; status = "okay"; switch: switch@0 { compatible = "marvell,mv88e6085"; pinctrl-0 = <&pinctrl_switch_irq>; pinctrl-names = "default"; reg = <0>; dsa,member = <0 0>; eeprom-length = <512>; interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; label = "gigabit_proc"; phy-handle = <&switchphy0>; }; port@1 { reg = <1>; label = "netaux"; phy-handle = <&switchphy1>; }; port@2 { reg = <2>; label = "cpu"; ethernet = <&fec>; fixed-link { speed = <100>; full-duplex; }; }; port@3 { reg = <3>; label = "netright"; phy-handle = <&switchphy3>; }; port@4 { reg = <4>; label = "netleft"; phy-handle = <&switchphy4>; }; }; mdio { #address-cells = <1>; #size-cells = <0>; switchphy0: switchphy@0 { reg = <0>; interrupt-parent = <&switch>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; switchphy1: switchphy@1 { reg = <1>; interrupt-parent = <&switch>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; switchphy2: switchphy@2 { reg = <2>; interrupt-parent = <&switch>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; switchphy3: switchphy@3 { reg = <3>; interrupt-parent = <&switch>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; }; switchphy4: switchphy@4 { reg = <4>; interrupt-parent = <&switch>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; }; }; }; }; }; &usbh1 { vbus-supply = <®_5p0v_main>; disable-over-current; status = "okay"; }; &usbotg { vbus-supply = <®_5p0v_user_usb>; disable-over-current; dr_mode = "host"; status = "okay"; }; &ssi1 { status = "okay"; }; &ssi2 { status = "okay"; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; status = "okay"; ssi1 { fsl,audmux-port = <0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | IMX_AUDMUX_V2_PTCR_TFSEL(2) | IMX_AUDMUX_V2_PTCR_TCSEL(2) | IMX_AUDMUX_V2_PTCR_TFSDIR | IMX_AUDMUX_V2_PTCR_TCLKDIR) IMX_AUDMUX_V2_PDCR_RXDSEL(2) >; }; aud3 { fsl,audmux-port = <2>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) >; }; ssi2 { fsl,audmux-port = <1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | IMX_AUDMUX_V2_PTCR_TFSEL(4) | IMX_AUDMUX_V2_PTCR_TCSEL(4) | IMX_AUDMUX_V2_PTCR_TFSDIR | IMX_AUDMUX_V2_PTCR_TCLKDIR) IMX_AUDMUX_V2_PDCR_RXDSEL(4) >; }; aud5 { fsl,audmux-port = <4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(1) >; }; }; &wdog1 { status = "disabled"; }; &iomuxc { pinctrl_accel: accelgrp { fsl,pins = < MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x4001b000 MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x4001b000 >; }; pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 >; }; pinctrl_codec1: dac1grp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x40000038 >; }; pinctrl_codec2: dac2grp { fsl,pins = < MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x40000038 >; }; pinctrl_disp0: disp0grp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f9 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f9 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f9 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f9 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f9 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f9 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f9 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f9 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f9 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f9 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f9 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f9 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f9 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f9 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f9 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f9 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f9 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f9 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f9 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f9 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f9 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f9 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f9 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f9 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f9 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f9 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f9 >; }; pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b1 >; }; pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_ENET_MDC__ENET_MDC 0x000b1 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b1 MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x100f5 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x100f5 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x100c0 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x100c0 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x100f5 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x100f5 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x40010040 MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x100b0 MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 >; }; pinctrl_mdio1: bitbangmdiogrp { fsl,pins = < /* Bitbang MDIO for DEB Switch */ MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x4001b030 MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40018830 >; }; pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x10038 >; }; pinctrl_pfuze100_irq: pfuze100grp { fsl,pins = < MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x40010000 >; }; pinctrl_reg_3p3v_sd: mmcsupply1grp { fsl,pins = < MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x858 >; }; pinctrl_reg_user_usb: usbotggrp { fsl,pins = < MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x40000038 >; }; pinctrl_rmii_phy_irq: phygrp { fsl,pins = < MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x40010000 >; }; pinctrl_switch_irq: switchgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x4001b000 >; }; pinctrl_tc358767: tc358767grp { fsl,pins = < MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x10 >; }; pinctrl_tpa1: tpa6130-1grp { fsl,pins = < MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x40000038 >; }; pinctrl_tpa2: tpa6130-2grp { fsl,pins = < MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x40000038 >; }; pinctrl_ts: tsgrp { fsl,pins = < MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 >; }; pinctrl_uart4: uart4grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 >; }; pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x10059 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x10059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10069 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040 >; }; pinctrl_usdhc4: usdhc4grp { fsl,pins = < MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x1b0b1 >; }; };