# # Drm device configuration # # This driver provides support for the # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. # menuconfig DRM tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA select HDMI select FB_CMDLINE select I2C select I2C_ALGOBIT select DMA_SHARED_BUFFER select SYNC_FILE help Kernel-level support for the Direct Rendering Infrastructure (DRI) introduced in XFree86 4.0. If you say Y here, you need to select the module that's right for your graphics card from the list below. These modules provide support for synchronization, security, and DMA transfers. Please see for more details. You should also select and configure AGP (/dev/agpgart) support if it is available for your platform. config DRM_MIPI_DSI bool depends on DRM config DRM_DP_AUX_CHARDEV bool "DRM DP AUX Interface" depends on DRM help Choose this option to enable a /dev/drm_dp_auxN node that allows to read and write values to arbitrary DPCD registers on the DP aux channel. config DRM_DEBUG_MM bool "Insert extra checks and debug info into the DRM range managers" default n depends on DRM=y depends on STACKTRACE_SUPPORT select STACKDEPOT help Enable allocation tracking of memory manager and leak detection on shutdown. Recommended for driver developers only. If in doubt, say "N". config DRM_DEBUG_MM_SELFTEST tristate "kselftests for DRM range manager (struct drm_mm)" depends on DRM depends on DEBUG_KERNEL select PRIME_NUMBERS select DRM_LIB_RANDOM default n help This option provides a kernel module that can be used to test the DRM range manager (drm_mm) and its API. This option is not useful for distributions or general kernels, but only for kernel developers working on DRM and associated drivers. If in doubt, say "N". config DRM_KMS_HELPER tristate depends on DRM help CRTC helpers for KMS drivers. config DRM_KMS_FB_HELPER bool depends on DRM_KMS_HELPER select FB select FRAMEBUFFER_CONSOLE if !EXPERT select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE select FB_SYS_FOPS select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_DEFERRED_IO help FBDEV helpers for KMS drivers. config DRM_FBDEV_EMULATION bool "Enable legacy fbdev support for your modesetting driver" depends on DRM select DRM_KMS_HELPER select DRM_KMS_FB_HELPER default y help Choose this option if you have a need for the legacy fbdev support. Note that this support also provides the linux console support on top of your modesetting driver. If in doubt, say "Y". config DRM_FBDEV_OVERALLOC int "Overallocation of the fbdev buffer" depends on DRM_FBDEV_EMULATION default 100 help Defines the fbdev buffer overallocation in percent. Default is 100. Typical values for double buffering will be 200, triple buffering 300. config DRM_LOAD_EDID_FIRMWARE bool "Allow to specify an EDID data set instead of probing for it" depends on DRM_KMS_HELPER help Say Y here, if you want to use EDID data to be loaded from the /lib/firmware directory or one of the provided built-in data sets. This may be necessary, if the graphics adapter or monitor are unable to provide appropriate EDID data. Since this feature is provided as a workaround for broken hardware, the default case is N. Details and instructions how to build your own EDID data are given in Documentation/EDID/HOWTO.txt. config DRM_TTM tristate depends on DRM && MMU help GPU memory management subsystem for devices with multiple GPU memory types. Will be enabled automatically if a device driver uses it. config DRM_GEM_CMA_HELPER bool depends on DRM help Choose this if you need the GEM CMA helper functions config DRM_KMS_CMA_HELPER bool depends on DRM select DRM_GEM_CMA_HELPER select DRM_KMS_FB_HELPER select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT help Choose this if you need the KMS CMA helper functions config DRM_VM bool depends on DRM && MMU source "drivers/gpu/drm/i2c/Kconfig" source "drivers/gpu/drm/arm/Kconfig" config DRM_RADEON tristate "ATI Radeon" depends on DRM && PCI && MMU select FW_LOADER select DRM_KMS_HELPER select DRM_TTM select POWER_SUPPLY select HWMON select BACKLIGHT_CLASS_DEVICE select BACKLIGHT_LCD_SUPPORT select INTERVAL_TREE help Choose this option if you have an ATI Radeon graphics card. There are both PCI and AGP versions. You don't need to choose this to run the Radeon in plain VGA mode. If M is selected, the module will be called radeon. source "drivers/gpu/drm/radeon/Kconfig" config DRM_AMDGPU tristate "AMD GPU" depends on DRM && PCI && MMU select FW_LOADER select DRM_KMS_HELPER select DRM_TTM select POWER_SUPPLY select HWMON select BACKLIGHT_CLASS_DEVICE select BACKLIGHT_LCD_SUPPORT select INTERVAL_TREE help Choose this option if you have a recent AMD Radeon graphics card. If M is selected, the module will be called amdgpu. source "drivers/gpu/drm/amd/amdgpu/Kconfig" source "drivers/gpu/drm/nouveau/Kconfig" source "drivers/gpu/drm/i915/Kconfig" config DRM_VGEM tristate "Virtual GEM provider" depends on DRM help Choose this option to get a virtual graphics memory manager, as used by Mesa's software renderer for enhanced performance. If M is selected the module will be called vgem. source "drivers/gpu/drm/exynos/Kconfig" source "drivers/gpu/drm/rockchip/Kconfig" source "drivers/gpu/drm/vmwgfx/Kconfig" source "drivers/gpu/drm/gma500/Kconfig" source "drivers/gpu/drm/udl/Kconfig" source "drivers/gpu/drm/ast/Kconfig" source "drivers/gpu/drm/mgag200/Kconfig" source "drivers/gpu/drm/cirrus/Kconfig" source "drivers/gpu/drm/armada/Kconfig" source "drivers/gpu/drm/atmel-hlcdc/Kconfig" source "drivers/gpu/drm/rcar-du/Kconfig" source "drivers/gpu/drm/shmobile/Kconfig" source "drivers/gpu/drm/sun4i/Kconfig" source "drivers/gpu/drm/omapdrm/Kconfig" source "drivers/gpu/drm/tilcdc/Kconfig" source "drivers/gpu/drm/qxl/Kconfig" source "drivers/gpu/drm/bochs/Kconfig" source "drivers/gpu/drm/virtio/Kconfig" source "drivers/gpu/drm/msm/Kconfig" source "drivers/gpu/drm/fsl-dcu/Kconfig" source "drivers/gpu/drm/tegra/Kconfig" source "drivers/gpu/drm/stm/Kconfig" source "drivers/gpu/drm/panel/Kconfig" source "drivers/gpu/drm/bridge/Kconfig" source "drivers/gpu/drm/sti/Kconfig" source "drivers/gpu/drm/amd/amdkfd/Kconfig" source "drivers/gpu/drm/imx/Kconfig" source "drivers/gpu/drm/vc4/Kconfig" source "drivers/gpu/drm/etnaviv/Kconfig" source "drivers/gpu/drm/arc/Kconfig" source "drivers/gpu/drm/hisilicon/Kconfig" source "drivers/gpu/drm/mediatek/Kconfig" source "drivers/gpu/drm/zte/Kconfig" source "drivers/gpu/drm/mxsfb/Kconfig" source "drivers/gpu/drm/meson/Kconfig" source "drivers/gpu/drm/tinydrm/Kconfig" source "drivers/gpu/drm/pl111/Kconfig" source "drivers/gpu/drm/tve200/Kconfig" # Keep legacy drivers last menuconfig DRM_LEGACY bool "Enable legacy drivers (DANGEROUS)" depends on DRM && MMU select DRM_VM help Enable legacy DRI1 drivers. Those drivers expose unsafe and dangerous APIs to user-space, which can be used to circumvent access restrictions and other security measures. For backwards compatibility those drivers are still available, but their use is highly inadvisable and might harm your system. You are recommended to use the safe modeset-only drivers instead, and perform 3D emulation in user-space. Unless you have strong reasons to go rogue, say "N". if DRM_LEGACY config DRM_TDFX tristate "3dfx Banshee/Voodoo3+" depends on DRM && PCI help Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), graphics card. If M is selected, the module will be called tdfx. config DRM_R128 tristate "ATI Rage 128" depends on DRM && PCI select FW_LOADER help Choose this option if you have an ATI Rage 128 graphics card. If M is selected, the module will be called r128. AGP support for this card is strongly suggested (unless you have a PCI version). config DRM_I810 tristate "Intel I810" # !PREEMPT because of missing ioctl locking depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN) help Choose this option if you have an Intel I810 graphics card. If M is selected, the module will be called i810. AGP support is required for this driver to work. config DRM_MGA tristate "Matrox g200/g400" depends on DRM && PCI select FW_LOADER help Choose this option if you have a Matrox G200, G400 or G450 graphics card. If M is selected, the module will be called mga. AGP support is required for this driver to work. config DRM_SIS tristate "SiS video cards" depends on DRM && AGP depends on FB_SIS || FB_SIS=n help Choose this option if you have a SiS 630 or compatible video chipset. If M is selected the module will be called sis. AGP support is required for this driver to work. config DRM_VIA tristate "Via unichrome video cards" depends on DRM && PCI help Choose this option if you have a Via unichrome or compatible video chipset. If M is selected the module will be called via. config DRM_SAVAGE tristate "Savage video cards" depends on DRM && PCI help Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister chipset. If M is selected the module will be called savage. endif # DRM_LEGACY config DRM_LIB_RANDOM bool default n