/************************************************************************ * Copyright 2003 Digi International (www.digi.com) * * Copyright (C) 2004 IBM Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR * PURPOSE. See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, * MA 02111-1307, USA. * * Contact Information: * Scott H Kilau * Wendy Xiong * ***********************************************************************/ #ifndef __JSM_DRIVER_H #define __JSM_DRIVER_H #include #include /* To pick up the varions Linux types */ #include #include #include /* * Debugging levels can be set using debug insmod variable * They can also be compiled out completely. */ enum { DBG_INIT = 0x01, DBG_BASIC = 0x02, DBG_CORE = 0x04, DBG_OPEN = 0x08, DBG_CLOSE = 0x10, DBG_READ = 0x20, DBG_WRITE = 0x40, DBG_IOCTL = 0x80, DBG_PROC = 0x100, DBG_PARAM = 0x200, DBG_PSCAN = 0x400, DBG_EVENT = 0x800, DBG_DRAIN = 0x1000, DBG_MSIGS = 0x2000, DBG_MGMT = 0x4000, DBG_INTR = 0x8000, DBG_CARR = 0x10000, }; #define jsm_printk(nlevel, klevel, pdev, fmt, args...) \ if ((DBG_##nlevel & jsm_debug)) \ dev_printk(KERN_##klevel, pdev->dev, fmt, ## args) #define MAXLINES 256 #define MAXPORTS 8 #define MAX_STOPS_SENT 5 /* Board type definitions */ #define T_NEO 0000 #define T_CLASSIC 0001 #define T_PCIBUS 0400 /* Board State Definitions */ #define BD_RUNNING 0x0 #define BD_REASON 0x7f #define BD_NOTFOUND 0x1 #define BD_NOIOPORT 0x2 #define BD_NOMEM 0x3 #define BD_NOBIOS 0x4 #define BD_NOFEP 0x5 #define BD_FAILED 0x6 #define BD_ALLOCATED 0x7 #define BD_TRIBOOT 0x8 #define BD_BADKME 0x80 /* 4 extra for alignment play space */ #define WRITEBUFLEN ((4096) + 4) #define MYFLIPLEN N_TTY_BUF_SIZE #define JSM_VERSION "jsm: 1.2-1-INKERNEL" #define JSM_PARTNUM "40002438_A-INKERNEL" struct jsm_board; struct jsm_channel; /************************************************************************ * Per board operations structure * ************************************************************************/ struct board_ops { irq_handler_t intr; void (*uart_init) (struct jsm_channel *ch); void (*uart_off) (struct jsm_channel *ch); void (*param) (struct jsm_channel *ch); void (*assert_modem_signals) (struct jsm_channel *ch); void (*flush_uart_write) (struct jsm_channel *ch); void (*flush_uart_read) (struct jsm_channel *ch); void (*disable_receiver) (struct jsm_channel *ch); void (*enable_receiver) (struct jsm_channel *ch); void (*send_break) (struct jsm_channel *ch); void (*clear_break) (struct jsm_channel *ch, int); void (*send_start_character) (struct jsm_channel *ch); void (*send_stop_character) (struct jsm_channel *ch); void (*copy_data_from_queue_to_uart) (struct jsm_channel *ch); u32 (*get_uart_bytes_left) (struct jsm_channel *ch); void (*send_immediate_char) (struct jsm_channel *ch, unsigned char); }; /* * Per-board information */ struct jsm_board { int boardnum; /* Board number: 0-32 */ int type; /* Type of board */ u8 rev; /* PCI revision ID */ struct pci_dev *pci_dev; u32 maxports; /* MAX ports this board can handle */ spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and * the interrupt routine from each other. */ u32 nasync; /* Number of ports on card */ u32 irq; /* Interrupt request number */ u64 intr_count; /* Count of interrupts */ u64 membase; /* Start of base memory of the card */ u64 membase_end; /* End of base memory of the card */ u8 __iomem *re_map_membase;/* Remapped memory of the card */ u64 iobase; /* Start of io base of the card */ u64 iobase_end; /* End of io base of the card */ u32 bd_uart_offset; /* Space between each UART */ struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */ char *flipbuf; /* Our flip buffer, alloced if board is found */ u32 bd_dividend; /* Board/UARTs specific dividend */ struct board_ops *bd_ops; struct list_head jsm_board_entry; }; /************************************************************************ * Device flag definitions for ch_flags. ************************************************************************/ #define CH_PRON 0x0001 /* Printer on string */ #define CH_STOP 0x0002 /* Output is stopped */ #define CH_STOPI 0x0004 /* Input is stopped */ #define CH_CD 0x0008 /* Carrier is present */ #define CH_FCAR 0x0010 /* Carrier forced on */ #define CH_HANGUP 0x0020 /* Hangup received */ #define CH_RECEIVER_OFF 0x0040 /* Receiver is off */ #define CH_OPENING 0x0080 /* Port in fragile open state */ #define CH_CLOSING 0x0100 /* Port in fragile close state */ #define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */ #define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */ #define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */ #define CH_BREAK_SENDING 0x1000 /* Break is being sent */ #define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */ #define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */ #define CH_BAUD0 0x08000 /* Used for checking B0 transitions */ /* Our Read/Error/Write queue sizes */ #define RQUEUEMASK 0x1FFF /* 8 K - 1 */ #define EQUEUEMASK 0x1FFF /* 8 K - 1 */ #define WQUEUEMASK 0x0FFF /* 4 K - 1 */ #define RQUEUESIZE (RQUEUEMASK + 1) #define EQUEUESIZE RQUEUESIZE #define WQUEUESIZE (WQUEUEMASK + 1) /************************************************************************ * Channel information structure. ************************************************************************/ struct jsm_channel { struct uart_port uart_port; struct jsm_board *ch_bd; /* Board structure pointer */ spinlock_t ch_lock; /* provide for serialization */ wait_queue_head_t ch_flags_wait; u32 ch_portnum; /* Port number, 0 offset. */ u32 ch_open_count; /* open count */ u32 ch_flags; /* Channel flags */ u64 ch_close_delay; /* How long we should drop RTS/DTR for */ u64 ch_cpstime; /* Time for CPS calculations */ tcflag_t ch_c_iflag; /* channel iflags */ tcflag_t ch_c_cflag; /* channel cflags */ tcflag_t ch_c_oflag; /* channel oflags */ tcflag_t ch_c_lflag; /* channel lflags */ u8 ch_stopc; /* Stop character */ u8 ch_startc; /* Start character */ u32 ch_old_baud; /* Cache of the current baud */ u32 ch_wopen; /* Waiting for open process cnt */ u8 ch_mostat; /* FEP output modem status */ u8 ch_mistat; /* FEP input modem status */ struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */ u8 ch_cached_lsr; /* Cached value of the LSR register */ u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */ u16 ch_r_head; /* Head location of the read queue */ u16 ch_r_tail; /* Tail location of the read queue */ u8 *ch_equeue; /* Our error queue buffer - malloc'ed */ u16 ch_e_head; /* Head location of the error queue */ u16 ch_e_tail; /* Tail location of the error queue */ u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */ u16 ch_w_head; /* Head location of the write queue */ u16 ch_w_tail; /* Tail location of the write queue */ u64 ch_rxcount; /* total of data received so far */ u64 ch_txcount; /* total of data transmitted so far */ u8 ch_r_tlevel; /* Receive Trigger level */ u8 ch_t_tlevel; /* Transmit Trigger level */ u8 ch_r_watermark; /* Receive Watermark */ u32 ch_stops_sent; /* How many times I have sent a stop character * to try to stop the other guy sending. */ u64 ch_err_parity; /* Count of parity errors on channel */ u64 ch_err_frame; /* Count of framing errors on channel */ u64 ch_err_break; /* Count of breaks on channel */ u64 ch_err_overrun; /* Count of overruns on channel */ u64 ch_xon_sends; /* Count of xons transmitted */ u64 ch_xoff_sends; /* Count of xoffs transmitted */ }; /************************************************************************ * Per channel/port NEO UART structure * ************************************************************************ * Base Structure Entries Usage Meanings to Host * * * * W = read write R = read only * * U = Unused. * ************************************************************************/ struct neo_uart_struct { u8 txrx; /* WR RHR/THR - Holding Reg */ u8 ier; /* WR IER - Interrupt Enable Reg */ u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */ u8 lcr; /* WR LCR - Line Control Reg */ u8 mcr; /* WR MCR - Modem Control Reg */ u8 lsr; /* WR LSR - Line Status Reg */ u8 msr; /* WR MSR - Modem Status Reg */ u8 spr; /* WR SPR - Scratch Pad Reg */ u8 fctr; /* WR FCTR - Feature Control Reg */ u8 efr; /* WR EFR - Enhanced Function Reg */ u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */ u8 rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */ u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */ u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */ u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */ u8 xonchar2; /* WR XON 2 - XOn Character 2 Reg */ u8 reserved1[0x2ff - 0x200]; /* U Reserved by Exar */ u8 txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */ u8 reserved2[0x37f - 0x340]; /* U Reserved by Exar */ u8 rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */ }; /* Where to read the extended interrupt register (32bits instead of 8bits) */ #define UART_17158_POLL_ADDR_OFFSET 0x80 /* * These are the redefinitions for the FCTR on the XR17C158, since * Exar made them different than their earlier design. (XR16C854) */ /* These are only applicable when table D is selected */ #define UART_17158_FCTR_RTS_NODELAY 0x00 #define UART_17158_FCTR_RTS_4DELAY 0x01 #define UART_17158_FCTR_RTS_6DELAY 0x02 #define UART_17158_FCTR_RTS_8DELAY 0x03 #define UART_17158_FCTR_RTS_12DELAY 0x12 #define UART_17158_FCTR_RTS_16DELAY 0x05 #define UART_17158_FCTR_RTS_20DELAY 0x13 #define UART_17158_FCTR_RTS_24DELAY 0x06 #define UART_17158_FCTR_RTS_28DELAY 0x14 #define UART_17158_FCTR_RTS_32DELAY 0x07 #define UART_17158_FCTR_RTS_36DELAY 0x16 #define UART_17158_FCTR_RTS_40DELAY 0x08 #define UART_17158_FCTR_RTS_44DELAY 0x09 #define UART_17158_FCTR_RTS_48DELAY 0x10 #define UART_17158_FCTR_RTS_52DELAY 0x11 #define UART_17158_FCTR_RTS_IRDA 0x10 #define UART_17158_FCTR_RS485 0x20 #define UART_17158_FCTR_TRGA 0x00 #define UART_17158_FCTR_TRGB 0x40 #define UART_17158_FCTR_TRGC 0x80 #define UART_17158_FCTR_TRGD 0xC0 /* 17158 trigger table selects.. */ #define UART_17158_FCTR_BIT6 0x40 #define UART_17158_FCTR_BIT7 0x80 /* 17158 TX/RX memmapped buffer offsets */ #define UART_17158_RX_FIFOSIZE 64 #define UART_17158_TX_FIFOSIZE 64 /* 17158 Extended IIR's */ #define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */ #define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */ #define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */ #define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */ /* * These are the extended interrupts that get sent * back to us from the UART's 32bit interrupt register */ #define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */ #define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */ #define UART_17158_TXRDY 0x3 /* TX Ready */ #define UART_17158_MSR 0x4 /* Modem State Change */ #define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */ #define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */ /* * These are the EXTENDED definitions for the 17C158's Interrupt * Enable Register. */ #define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */ #define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */ #define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */ #define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */ #define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */ #define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */ #define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */ #define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */ #define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */ #define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */ #define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */ #define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI" #define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator" #define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI" #define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator" #define PCIE_DEVICE_NEO_IBM_PCI_NAME "Neo 4 - PCI Express - IBM" /* * Our Global Variables. */ extern struct uart_driver jsm_uart_driver; extern struct board_ops jsm_neo_ops; extern int jsm_debug; /************************************************************************* * * Prototypes for non-static functions used in more than one module * *************************************************************************/ int jsm_tty_write(struct uart_port *port); int jsm_tty_init(struct jsm_board *); int jsm_uart_port_init(struct jsm_board *); int jsm_remove_uart_port(struct jsm_board *); void jsm_input(struct jsm_channel *ch); void jsm_check_queue_flow_control(struct jsm_channel *ch); #endif