/* em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB video capture devices Copyright (C) 2005 Ludovico Cavedon Markus Rechberger Mauro Carvalho Chehab Sascha Sommer Copyright (C) 2012 Frank Schäfer This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "em28xx.h" #define DRIVER_NAME "em28xx" static int tuner = -1; module_param(tuner, int, 0444); MODULE_PARM_DESC(tuner, "tuner type"); static unsigned int disable_ir; module_param(disable_ir, int, 0444); MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); static unsigned int disable_usb_speed_check; module_param(disable_usb_speed_check, int, 0444); MODULE_PARM_DESC(disable_usb_speed_check, "override min bandwidth requirement of 480M bps"); static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); static int usb_xfer_mode = -1; module_param(usb_xfer_mode, int, 0444); MODULE_PARM_DESC(usb_xfer_mode, "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ static unsigned long em28xx_devused; struct em28xx_hash_table { unsigned long hash; unsigned int model; unsigned int tuner; }; static void em28xx_pre_card_setup(struct em28xx *dev); /* * Reset sequences for analog/digital modes */ /* Reset for the most [analog] boards */ static struct em28xx_reg_seq default_analog[] = { {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Reset for the most [digital] boards */ static struct em28xx_reg_seq default_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Board Hauppauge WinTV HVR 900 analog */ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, { 0x05, 0xff, 0x10, 10}, { -1, -1, -1, -1}, }; /* Board Hauppauge WinTV HVR 900 digital */ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x04, 0x0f, 10}, {EM2880_R04_GPO, 0x0c, 0x0f, 10}, { -1, -1, -1, -1}, }; /* Board Hauppauge WinTV HVR 900 (R2) digital */ static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x0c, 0x0f, 10}, { -1, -1, -1, -1}, }; /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ /* Board - EM2870 Kworld 355u Analog - No input analog */ /* Board - EM2882 Kworld 315U digital */ static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, {EM2880_R04_GPO, 0x04, 0xff, 10}, {EM2880_R04_GPO, 0x0c, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { {EM2880_R04_GPO, 0x08, 0xff, 10}, {EM2880_R04_GPO, 0x0c, 0xff, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, {EM2880_R04_GPO, 0x0c, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq kworld_330u_analog[] = { {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x00, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq kworld_330u_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, { -1, -1, -1, -1}, }; /* Evga inDtube GPIO0 - Enable digital power (s5h1409) - low to enable GPIO1 - Enable analog power (tvp5150/emp202) - low to enable GPIO4 - xc3028 reset GOP3 - s5h1409 reset */ static struct em28xx_reg_seq evga_indtube_analog[] = { {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq evga_indtube_digital[] = { {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, {EM2880_R04_GPO, 0x04, 0xff, 10}, {EM2880_R04_GPO, 0x0c, 0xff, 1}, { -1, -1, -1, -1}, }; /* * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: * EM_GPIO_0 - currently unknown * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) * EM_GPIO_2 - currently unknown * EM_GPIO_3 - currently unknown * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) * EM_GPIO_6 - currently unknown * EM_GPIO_7 - currently unknown */ static struct em28xx_reg_seq kworld_a340_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Pinnacle Hybrid Pro eb1a:2881 */ static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ {EM2880_R04_GPO, 0x0c, 0xff, 1}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x00, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, { -1, -1, -1, -1}, }; /* eb1a:2868 Reddo DVB-C USB TV Box GPIO4 - CU1216L NIM Other GPIOs seems to be don't care. */ static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Mute/unmute */ static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { {EM2820_R08_GPIO_CTRL, 5, 7, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { {EM2820_R08_GPIO_CTRL, 4, 7, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq compro_mute_gpio[] = { {EM2820_R08_GPIO_CTRL, 6, 7, 10}, { -1, -1, -1, -1}, }; /* Terratec AV350 */ static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq silvercrest_reg_seq[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq vc211a_enable[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq dikom_dk300_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, { -1, -1, -1, -1}, }; /* Reset for the most [digital] boards */ static struct em28xx_reg_seq leadership_digital[] = { {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq leadership_reset[] = { {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, { -1, -1, -1, -1}, }; /* 2013:024f PCTV nanoStick T2 290e * GPIO_6 - demod reset * GPIO_7 - LED */ static struct em28xx_reg_seq pctv_290e[] = { {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ { -1, -1, -1, -1}, }; #if 0 static struct em28xx_reg_seq terratec_h5_gpio[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq terratec_h5_digital[] = { {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, { -1, -1, -1, -1}, }; #endif /* 2013:024f PCTV DVB-S2 Stick 460e * GPIO_0 - POWER_ON * GPIO_1 - BOOST * GPIO_2 - VUV_LNB (red LED) * GPIO_3 - EXT_12V * GPIO_4 - INT_DEM (DEMOD GPIO_0) * GPIO_5 - INT_LNB * GPIO_6 - RESET_DEM * GPIO_7 - LED (green LED) */ static struct em28xx_reg_seq pctv_460e[] = { {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, { 0x0d, 0xff, 0xff, 50}, {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ { 0x0d, 0x42, 0xff, 50}, {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ { -1, -1, -1, -1}, }; static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, { -1, -1, -1, -1}, }; #if 0 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq hauppauge_930c_digital[] = { {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, { -1, -1, -1, -1}, }; #endif /* 1b80:e425 MaxMedia UB425-TC * 1b80:e1cc Delock 61959 * GPIO_6 - demod reset, 0=active * GPIO_7 - LED, 0=active */ static struct em28xx_reg_seq maxmedia_ub425_tc[] = { {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ { -1, -1, -1, -1}, }; /* 2304:0242 PCTV QuatroStick (510e) * GPIO_2: decoder reset, 0=active * GPIO_4: decoder suspend, 0=active * GPIO_6: demod reset, 0=active * GPIO_7: LED, 1=active */ static struct em28xx_reg_seq pctv_510e[] = { {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ { -1, -1, -1, -1}, }; /* 2013:0251 PCTV QuatroStick nano (520e) * GPIO_2: decoder reset, 0=active * GPIO_4: decoder suspend, 0=active * GPIO_6: demod reset, 0=active * GPIO_7: LED, 1=active */ static struct em28xx_reg_seq pctv_520e[] = { {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ { -1, -1, -1, -1}, }; /* * Button definitions */ static struct em28xx_button std_snapshot_button[] = { { .role = EM28XX_BUTTON_SNAPSHOT, .reg_r = EM28XX_R0C_USBSUSP, .reg_clearing = EM28XX_R0C_USBSUSP, .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, .inverted = 0, }, {-1, 0, 0, 0, 0}, }; /* * Board definitions */ struct em28xx_board em28xx_boards[] = { [EM2750_BOARD_UNKNOWN] = { .name = "EM2710/EM2750/EM2751 webcam grabber", .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, .gpio = silvercrest_reg_seq, } }, }, [EM2800_BOARD_UNKNOWN] = { .name = "Unknown EM2800 video grabber", .is_em2800 = 1, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .tuner_type = TUNER_ABSENT, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_UNKNOWN] = { .name = "Unknown EM2750/28xx video grabber", .tuner_type = TUNER_ABSENT, .is_webcam = 1, /* To enable sensor probe */ }, [EM2750_BOARD_DLCW_130] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "Huaqi DLCW-130", .valid = EM28XX_BOARD_NOT_VALIDATED, .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, } }, }, [EM2820_BOARD_KWORLD_PVRTV2800RF] = { .name = "Kworld PVR TV 2800 RF", .tuner_type = TUNER_TEMIC_PAL, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_GADMEI_TVR200] = { .name = "Gadmei TVR200", .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_TERRATEC_CINERGY_250] = { .name = "Terratec Cinergy 250 USB", .tuner_type = TUNER_LG_PAL_NEW_TAPC, .has_ir_i2c = 1, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_PINNACLE_USB_2] = { .name = "Pinnacle PCTV USB 2", .tuner_type = TUNER_LG_PAL_NEW_TAPC, .has_ir_i2c = 1, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { .name = "Hauppauge WinTV USB 2", .tuner_type = TUNER_PHILIPS_FM1236_MK3, .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE | TDA9887_PORT2_ACTIVE, .decoder = EM28XX_TVP5150, .has_msp34xx = 1, .has_ir_i2c = 1, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = MSP_INPUT_DEFAULT, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), } }, }, [EM2820_BOARD_DLINK_USB_TV] = { .name = "D-Link DUB-T210 TV Tuner", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { .name = "Hercules Smart TV USB 2.0", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_GADMEI_UTV310] = { .name = "Gadmei UTV310", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_TNF_5335MF, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { .name = "Leadtek Winfast USB II Deluxe", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .has_ir_i2c = 1, .tvaudio_addr = 0x58, .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE | TDA9887_QSS, .decoder = EM28XX_SAA711X, .adecoder = EM28XX_TVAUDIO, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE4, .amux = EM28XX_AMUX_AUX, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE5, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, .radio = { .type = EM28XX_RADIO, .amux = EM28XX_AMUX_AUX, } }, [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { .name = "Videology 20K14XUSB USB2.0", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, } }, }, [EM2820_BOARD_SILVERCREST_WEBCAM] = { .name = "Silvercrest Webcam 1.3mpix", .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, .gpio = silvercrest_reg_seq, } }, }, [EM2821_BOARD_SUPERCOMP_USB_2] = { .name = "Supercomp USB 2.0 TV", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_PHILIPS_FM1236_MK3, .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE | TDA9887_PORT2_ACTIVE, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2821_BOARD_USBGEAR_VD204] = { .name = "Usbgear VD204v9", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, /* Capture only device */ .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_NETGMBH_CAM] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "NetGMBH Cam", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, } }, }, [EM2860_BOARD_TYPHOON_DVD_MAKER] = { .name = "Typhoon DVD Maker", .decoder = EM28XX_SAA711X, .tuner_type = TUNER_ABSENT, /* Capture only device */ .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_GADMEI_UTV330] = { .name = "Gadmei UTV330", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_TNF_5335MF, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2861_BOARD_GADMEI_UTV330PLUS] = { .name = "Gadmei UTV330+", .tuner_type = TUNER_TNF_5335MF, .tda9887_conf = TDA9887_PRESENT, .ir_codes = RC_MAP_GADMEI_RM008Z, .decoder = EM28XX_SAA711X, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Cinergy A Hybrid XS", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2861_BOARD_KWORLD_PVRTV_300U] = { .name = "KWorld PVRTV 300U", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { .name = "Yakumo MovieMixer", .tuner_type = TUNER_ABSENT, /* Capture only device */ .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { .name = "EM2860/TVP5150 Reference Design", .tuner_type = TUNER_ABSENT, /* Capture only device */ .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2861_BOARD_PLEXTOR_PX_TV100U] = { .name = "Plextor ConvertX PX-TV100U", .tuner_type = TUNER_TNF_5335MF, .xclk = EM28XX_XCLK_I2S_MSB_TIMING | EM28XX_XCLK_FREQUENCY_12MHZ, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_TVP5150, .has_msp34xx = 1, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = pinnacle_hybrid_pro_analog, } }, }, /* Those boards with em2870 are DVB Only*/ [EM2870_BOARD_TERRATEC_XS] = { .name = "Terratec Cinergy T XS", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, }, [EM2870_BOARD_TERRATEC_XS_MT2060] = { .name = "Terratec Cinergy T XS (MT2060)", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, /* MT2060 */ }, [EM2870_BOARD_KWORLD_350U] = { .name = "Kworld 350 U DVB-T", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, }, [EM2870_BOARD_KWORLD_355U] = { .name = "Kworld 355 U DVB-T", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, .tuner_gpio = default_tuner_gpio, .has_dvb = 1, .dvb_gpio = default_digital, }, [EM2870_BOARD_PINNACLE_PCTV_DVB] = { .name = "Pinnacle PCTV DVB-T", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, /* MT2060 */ /* djh - I have serious doubts this is right... */ .xclk = EM28XX_XCLK_IR_RC5_MODE | EM28XX_XCLK_FREQUENCY_10MHZ, }, [EM2870_BOARD_COMPRO_VIDEOMATE] = { .name = "Compro, VideoMate U3", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, /* MT2060 */ }, [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { .name = "Terratec Hybrid XS Secam", .has_msp34xx = 1, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = terratec_cinergy_USB_XS_FR_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = terratec_cinergy_USB_XS_FR_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = terratec_cinergy_USB_XS_FR_analog, } }, }, [EM2884_BOARD_TERRATEC_H5] = { .name = "Terratec Cinergy H5", .has_dvb = 1, #if 0 .tuner_type = TUNER_PHILIPS_TDA8290, .tuner_addr = 0x41, .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ .tuner_gpio = terratec_h5_gpio, #else .tuner_type = TUNER_ABSENT, #endif .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { .name = "Hauppauge WinTV HVR 930C", .has_dvb = 1, #if 0 /* FIXME: Add analog support */ .tuner_type = TUNER_XC5000, .tuner_addr = 0x41, .dvb_gpio = hauppauge_930c_digital, .tuner_gpio = hauppauge_930c_gpio, #else .tuner_type = TUNER_ABSENT, #endif .ir_codes = RC_MAP_HAUPPAUGE, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { .name = "C3 Tech Digital Duo HDTV/SDTV USB", .has_dvb = 1, /* FIXME: Add analog support - need a saa7136 driver */ .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ .ir_codes = RC_MAP_EMPTY, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, .dvb_gpio = c3tech_digital_duo_digital, }, [EM2884_BOARD_CINERGY_HTC_STICK] = { .name = "Terratec Cinergy HTC Stick", .has_dvb = 1, .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, .tuner_type = TUNER_ABSENT, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { .name = "Hauppauge WinTV HVR 900", .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { .name = "Hauppauge WinTV HVR 900 (R2)", .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { .name = "Hauppauge WinTV HVR 850", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { .name = "Hauppauge WinTV HVR 950", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { .name = "Pinnacle PCTV HD Pro Stick", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { .name = "AMD ATI TV Wonder HD 600", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2880_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Hybrid XS", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, .dvb_gpio = default_digital, .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = default_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, } }, }, /* maybe there's a reason behind it why Terratec sells the Hybrid XS as Prodigy XS with a different PID, let's keep it separated for now maybe we'll need it lateron */ [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { .name = "Terratec Prodigy XS", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2820_BOARD_MSI_VOX_USB_2] = { .name = "MSI VOX USB 2.0", .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE | TDA9887_PORT2_ACTIVE, .max_range_640_480 = 1, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE4, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2800_BOARD_TERRATEC_CINERGY_200] = { .name = "Terratec Cinergy 200 USB", .is_em2800 = 1, .has_ir_i2c = 1, .tuner_type = TUNER_LG_TALN, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2800_BOARD_GRABBEEX_USB2800] = { .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", .is_em2800 = 1, .decoder = EM28XX_SAA711X, .tuner_type = TUNER_ABSENT, /* capture only board */ .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2800_BOARD_VC211A] = { .name = "Actionmaster/LinXcel/Digitus VC211A", .is_em2800 = 1, .tuner_type = TUNER_ABSENT, /* Capture-only board */ .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, .gpio = vc211a_enable, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, .gpio = vc211a_enable, } }, }, [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { .name = "Leadtek Winfast USB II", .is_em2800 = 1, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2800_BOARD_KWORLD_USB2800] = { .name = "Kworld USB2800", .is_em2800 = 1, .tuner_type = TUNER_PHILIPS_FCV1236D, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_PINNACLE_DVC_90] = { .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", .tuner_type = TUNER_ABSENT, /* capture only board */ .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2800_BOARD_VGEAR_POCKETTV] = { .name = "V-Gear PocketTV", .is_em2800 = 1, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { .name = "Pixelview PlayTV Box 4 USB 2.0", .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_YMEC_TVF_5533MF, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, .aout = EM28XX_AOUT_MONO | /* I2S */ EM28XX_AOUT_MASTER, /* Line out pin */ }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", .buttons = std_snapshot_button, .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_YMEC_TVF_5533MF, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, .aout = EM28XX_AOUT_MONO | /* I2S */ EM28XX_AOUT_MASTER, /* Line out pin */ }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { .name = "EM2860/SAA711X Reference Design", .buttons = std_snapshot_button, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, } }, }, [EM2874_BOARD_LEADERSHIP_ISDBT] = { .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, .name = "EM2874 Leadership ISDBT", .tuner_type = TUNER_ABSENT, .tuner_gpio = leadership_reset, .dvb_gpio = leadership_digital, .has_dvb = 1, }, [EM2880_BOARD_MSI_DIGIVOX_AD] = { .name = "MSI DigiVox A/D", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = em2880_msi_digivox_ad_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2880_msi_digivox_ad_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2880_msi_digivox_ad_analog, } }, }, [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { .name = "MSI DigiVox A/D II", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = em2880_msi_digivox_ad_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2880_msi_digivox_ad_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2880_msi_digivox_ad_analog, } }, }, [EM2880_BOARD_KWORLD_DVB_305U] = { .name = "KWorld DVB-T 305U", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2880_BOARD_KWORLD_DVB_310U] = { .name = "KWorld DVB-T 310U", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .has_dvb = 1, .dvb_gpio = default_digital, .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = default_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, }, { /* S-video has not been tested yet */ .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, } }, }, [EM2882_BOARD_KWORLD_ATSC_315U] = { .name = "KWorld ATSC 315U HDTV TV Box", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_THOMSON_DTT761X, .tuner_gpio = em2882_kworld_315u_tuner_gpio, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .has_dvb = 1, .dvb_gpio = em2882_kworld_315u_digital, .ir_codes = RC_MAP_KWORLD_315U, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, /* Analog mode - still not ready */ /*.input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, .gpio = em2882_kworld_315u_analog, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2882_kworld_315u_analog1, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2882_kworld_315u_analog1, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, } }, */ }, [EM2880_BOARD_EMPIRE_DUAL_TV] = { .name = "Empire dual TV", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .has_dvb = 1, .dvb_gpio = default_digital, .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = default_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, } }, }, [EM2881_BOARD_DNT_DA2_HYBRID] = { .name = "DNT DA2 Hybrid", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = default_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, } }, }, [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { .name = "Pinnacle Hybrid Pro", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, .dvb_gpio = pinnacle_hybrid_pro_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = pinnacle_hybrid_pro_analog, } }, }, [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { .name = "Pinnacle Hybrid Pro (330e)", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2882_BOARD_KWORLD_VS_DVBT] = { .name = "Kworld VS-DVB-T 323UR", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = kworld_330u_digital, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ .ir_codes = RC_MAP_KWORLD_315U, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2882_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .decoder = EM28XX_TVP5150, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2882_BOARD_DIKOM_DK300] = { .name = "Dikom DK300", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = dikom_dk300_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = default_analog, } }, }, [EM2883_BOARD_KWORLD_HYBRID_330U] = { .name = "Kworld PlusTV HD Hybrid 330", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = kworld_330u_digital, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD | EM28XX_I2C_EEPROM_KEY_VALID, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = kworld_330u_analog, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = kworld_330u_analog, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = kworld_330u_analog, } }, }, [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { .name = "Compro VideoMate ForYou/Stereo", .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tvaudio_addr = 0xb0, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_TVP5150, .adecoder = EM28XX_TVAUDIO, .mute_gpio = compro_mute_gpio, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = compro_unmute_tv_gpio, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = compro_unmute_svid_gpio, } }, }, [EM2860_BOARD_KAIOMY_TVNPC_U2] = { .name = "Kaiomy TVnPC U2", .vchannels = 3, .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, .mts_firmware = 1, .decoder = EM28XX_TVP5150, .tuner_gpio = default_tuner_gpio, .ir_codes = RC_MAP_KAIOMY, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, .radio = { .type = EM28XX_RADIO, .amux = EM28XX_AMUX_LINE_IN, } }, [EM2860_BOARD_EASYCAP] = { .name = "Easy Cap Capture DC-60", .vchannels = 2, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_IODATA_GVMVP_SZ] = { .name = "IO-DATA GV-MVP/SZ", .tuner_type = TUNER_PHILIPS_FM1236_MK3, .tuner_gpio = default_tuner_gpio, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { /* Composite has not been tested yet */ .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_VIDEO, }, { /* S-video has not been tested yet */ .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_VIDEO, } }, }, [EM2860_BOARD_TERRATEC_GRABBY] = { .name = "Terratec Grabby", .vchannels = 2, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_TERRATEC_AV350] = { .name = "Terratec AV350", .vchannels = 2, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_TVP5150, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .mute_gpio = terratec_av350_mute_gpio, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AUDIO_SRC_LINE, .gpio = terratec_av350_unmute_gpio, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AUDIO_SRC_LINE, .gpio = terratec_av350_unmute_gpio, } }, }, [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { .name = "Elgato Video Capture", .decoder = EM28XX_SAA711X, .tuner_type = TUNER_ABSENT, /* Capture only device */ .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2882_BOARD_EVGA_INDTUBE] = { .name = "Evga inDtube", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = evga_indtube_digital, .ir_codes = RC_MAP_EVGA_INDTUBE, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = evga_indtube_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = evga_indtube_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = evga_indtube_analog, } }, }, /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */ [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { .name = "Reddo DVB-C USB TV Box", .tuner_type = TUNER_ABSENT, .tuner_gpio = reddo_dvb_c_usb_box, .has_dvb = 1, }, /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold * initially as the KWorld PlusTV 340U, then as the UB435-Q. * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ [EM2870_BOARD_KWORLD_A340] = { .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ .has_dvb = 1, .dvb_gpio = kworld_a340_digital, .tuner_gpio = default_tuner_gpio, }, /* 2013:024f PCTV nanoStick T2 290e. * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ [EM28174_BOARD_PCTV_290E] = { .name = "PCTV nanoStick T2 290e", .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_290e, .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, /* 2013:024f PCTV DVB-S2 Stick 460e * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ [EM28174_BOARD_PCTV_460E] = { .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .name = "PCTV DVB-S2 Stick (460e)", .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_460e, .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, /* eb1a:5006 Honestech VIDBOX NW03 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ [EM2860_BOARD_HT_VIDBOX_NW03] = { .name = "Honestech Vidbox NW03", .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ .amux = EM28XX_AMUX_LINE_IN, } }, }, /* 1b80:e425 MaxMedia UB425-TC * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ [EM2874_BOARD_MAXMEDIA_UB425_TC] = { .name = "MaxMedia UB425-TC", .tuner_type = TUNER_ABSENT, .tuner_gpio = maxmedia_ub425_tc, .has_dvb = 1, .ir_codes = RC_MAP_REDDO, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, /* 2304:0242 PCTV QuatroStick (510e) * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ [EM2884_BOARD_PCTV_510E] = { .name = "PCTV QuatroStick (510e)", .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_510e, .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, /* 2013:0251 PCTV QuatroStick nano (520e) * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ [EM2884_BOARD_PCTV_520E] = { .name = "PCTV QuatroStick nano (520e)", .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_520e, .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { .name = "Terratec Cinergy HTC USB XS", .has_dvb = 1, .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, .tuner_type = TUNER_ABSENT, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, /* 1b80:e1cc Delock 61959 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 * mostly the same as MaxMedia UB-425-TC but different remote */ [EM2874_BOARD_DELOCK_61959] = { .name = "Delock 61959", .tuner_type = TUNER_ABSENT, .tuner_gpio = maxmedia_ub425_tc, .has_dvb = 1, .ir_codes = RC_MAP_DELOCK_61959, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, /* * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 */ [EM2874_BOARD_KWORLD_UB435Q_V2] = { .name = "KWorld USB ATSC TV Stick UB435-Q V2", .tuner_type = TUNER_ABSENT, .has_dvb = 1, .dvb_gpio = kworld_a340_digital, .tuner_gpio = default_tuner_gpio, .def_i2c_bus = 1, }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); /* table of devices that work with this driver */ struct usb_device_id em28xx_id_table[] = { { USB_DEVICE(0xeb1a, 0x2750), .driver_info = EM2750_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2751), .driver_info = EM2750_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2710), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2821), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2860), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2861), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2862), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2863), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2870), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2881), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2883), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2868), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2875), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0xe300), .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, { USB_DEVICE(0xeb1a, 0xe303), .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, { USB_DEVICE(0xeb1a, 0xe305), .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, { USB_DEVICE(0xeb1a, 0xe310), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, { USB_DEVICE(0xeb1a, 0xa313), .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, { USB_DEVICE(0xeb1a, 0xa316), .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, { USB_DEVICE(0xeb1a, 0xe320), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, { USB_DEVICE(0xeb1a, 0xe323), .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, { USB_DEVICE(0xeb1a, 0xe350), .driver_info = EM2870_BOARD_KWORLD_350U }, { USB_DEVICE(0xeb1a, 0xe355), .driver_info = EM2870_BOARD_KWORLD_355U }, { USB_DEVICE(0xeb1a, 0x2801), .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, { USB_DEVICE(0xeb1a, 0xe357), .driver_info = EM2870_BOARD_KWORLD_355U }, { USB_DEVICE(0xeb1a, 0xe359), .driver_info = EM2870_BOARD_KWORLD_355U }, { USB_DEVICE(0x1b80, 0xe302), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ { USB_DEVICE(0x1b80, 0xe304), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ { USB_DEVICE(0x0ccd, 0x0036), .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, { USB_DEVICE(0x0ccd, 0x004c), .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, { USB_DEVICE(0x0ccd, 0x004f), .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x005e), .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x0042), .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x0043), .driver_info = EM2870_BOARD_TERRATEC_XS }, { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, { USB_DEVICE(0x0ccd, 0x0084), .driver_info = EM2860_BOARD_TERRATEC_AV350 }, { USB_DEVICE(0x0ccd, 0x0096), .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, { USB_DEVICE(0x0ccd, 0x10AF), .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, { USB_DEVICE(0x0ccd, 0x00b2), .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, { USB_DEVICE(0x0fd9, 0x0033), .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE}, { USB_DEVICE(0x185b, 0x2870), .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, { USB_DEVICE(0x185b, 0x2041), .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, { USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, { USB_DEVICE(0x2040, 0x4201), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, { USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, { USB_DEVICE(0x2040, 0x6502), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, { USB_DEVICE(0x2040, 0x651f), .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, { USB_DEVICE(0x0438, 0xb002), .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, { USB_DEVICE(0x2001, 0xf112), .driver_info = EM2820_BOARD_DLINK_USB_TV }, { USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, { USB_DEVICE(0x2304, 0x021a), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x2304, 0x0226), .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, { USB_DEVICE(0x2304, 0x0227), .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, { USB_DEVICE(0x0413, 0x6023), .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, { USB_DEVICE(0x093b, 0xa003), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x093b, 0xa005), .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, { USB_DEVICE(0x04bb, 0x0515), .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, { USB_DEVICE(0xeb1a, 0x50a6), .driver_info = EM2860_BOARD_GADMEI_UTV330 }, { USB_DEVICE(0x1b80, 0xa340), .driver_info = EM2870_BOARD_KWORLD_A340 }, { USB_DEVICE(0x1b80, 0xe346), .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, { USB_DEVICE(0x2013, 0x024f), .driver_info = EM28174_BOARD_PCTV_290E }, { USB_DEVICE(0x2013, 0x024c), .driver_info = EM28174_BOARD_PCTV_460E }, { USB_DEVICE(0x2040, 0x1605), .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, { USB_DEVICE(0x1b80, 0xe755), .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, { USB_DEVICE(0xeb1a, 0x5006), .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ .driver_info = EM2860_BOARD_EASYCAP }, { USB_DEVICE(0x1b80, 0xe425), .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, { USB_DEVICE(0x2304, 0x0242), .driver_info = EM2884_BOARD_PCTV_510E }, { USB_DEVICE(0x2013, 0x0251), .driver_info = EM2884_BOARD_PCTV_520E }, { USB_DEVICE(0x1b80, 0xe1cc), .driver_info = EM2874_BOARD_DELOCK_61959 }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); /* * EEPROM hash table for devices with generic USB IDs */ static struct em28xx_hash_table em28xx_eeprom_hash[] = { /* P/N: SA 60002070465 Tuner: TVF7533-MF */ {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ static struct em28xx_hash_table em28xx_i2c_hash[] = { {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, }; /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */ static unsigned short saa711x_addrs[] = { 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */ 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */ I2C_CLIENT_END }; static unsigned short tvp5150_addrs[] = { 0xb8 >> 1, 0xba >> 1, I2C_CLIENT_END }; static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, I2C_CLIENT_END }; int em28xx_tuner_callback(void *ptr, int component, int command, int arg) { struct em28xx_i2c_bus *i2c_bus = ptr; struct em28xx *dev = i2c_bus->dev; int rc = 0; if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) return 0; if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) return 0; rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); return rc; } EXPORT_SYMBOL_GPL(em28xx_tuner_callback); static inline void em28xx_set_model(struct em28xx *dev) { dev->board = em28xx_boards[dev->model]; /* Those are the default values for the majority of boards Use those values if not specified otherwise at boards entry */ if (!dev->board.xclk) dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | EM28XX_XCLK_FREQUENCY_12MHZ; if (!dev->board.i2c_speed) dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ; /* Should be initialized early, for I2C to work */ dev->def_i2c_bus = dev->board.def_i2c_bus; } /* Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ static void em28xx_pre_card_setup(struct em28xx *dev) { /* Set the initial XCLK and I2C clock values based on the board definition */ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); if (!dev->board.is_em2800) em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); msleep(50); /* request some modules */ switch (dev->model) { case EM2861_BOARD_PLEXTOR_PX_TV100U: /* Sets the msp34xx I2S speed */ dev->i2s_speed = 2048000; break; case EM2861_BOARD_KWORLD_PVRTV_300U: case EM2880_BOARD_KWORLD_DVB_305U: em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); msleep(10); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); msleep(10); break; case EM2870_BOARD_COMPRO_VIDEOMATE: /* TODO: someone can do some cleanup here... not everything's needed */ em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); msleep(10); em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); msleep(10); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); mdelay(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); mdelay(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); mdelay(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); mdelay(70); break; case EM2870_BOARD_TERRATEC_XS_MT2060: /* this device needs some gpio writes to get the DVB-T demod work */ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); mdelay(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); mdelay(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); mdelay(70); break; case EM2870_BOARD_PINNACLE_PCTV_DVB: /* this device needs some gpio writes to get the DVB-T demod work */ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); mdelay(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); mdelay(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); mdelay(70); break; case EM2820_BOARD_GADMEI_UTV310: case EM2820_BOARD_MSI_VOX_USB_2: /* enables audio for that devices */ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); break; case EM2882_BOARD_KWORLD_ATSC_315U: em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); msleep(10); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); msleep(10); em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); msleep(10); em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); msleep(10); break; case EM2860_BOARD_KAIOMY_TVNPC_U2: em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); em28xx_write_regs(dev, 0x0d, "\x42", 1); em28xx_write_regs(dev, 0x08, "\xfd", 1); msleep(10); em28xx_write_regs(dev, 0x08, "\xff", 1); msleep(10); em28xx_write_regs(dev, 0x08, "\x7f", 1); msleep(10); em28xx_write_regs(dev, 0x08, "\x6b", 1); break; case EM2860_BOARD_EASYCAP: em28xx_write_regs(dev, 0x08, "\xf8", 1); break; case EM2820_BOARD_IODATA_GVMVP_SZ: em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); msleep(10); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); msleep(70); break; } em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_set_mode(dev, EM28XX_ANALOG_MODE); /* Unlock device */ em28xx_set_mode(dev, EM28XX_SUSPEND); } static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) { memset(ctl, 0, sizeof(*ctl)); ctl->fname = XC2028_DEFAULT_FIRMWARE; ctl->max_len = 64; ctl->mts = em28xx_boards[dev->model].mts_firmware; switch (dev->model) { case EM2880_BOARD_EMPIRE_DUAL_TV: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: case EM2882_BOARD_TERRATEC_HYBRID_XS: ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: case EM2881_BOARD_PINNACLE_HYBRID_PRO: ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: ctl->demod = XC3028_FE_DEFAULT; break; case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: ctl->demod = XC3028_FE_DEFAULT; ctl->fname = XC3028L_DEFAULT_FIRMWARE; break; case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: /* FIXME: Better to specify the needed IF */ ctl->demod = XC3028_FE_DEFAULT; break; case EM2883_BOARD_KWORLD_HYBRID_330U: case EM2882_BOARD_DIKOM_DK300: case EM2882_BOARD_KWORLD_VS_DVBT: ctl->demod = XC3028_FE_CHINA; ctl->fname = XC2028_DEFAULT_FIRMWARE; break; case EM2882_BOARD_EVGA_INDTUBE: ctl->demod = XC3028_FE_CHINA; ctl->fname = XC3028L_DEFAULT_FIRMWARE; break; default: ctl->demod = XC3028_FE_OREN538; } } static void em28xx_tuner_setup(struct em28xx *dev) { struct tuner_setup tun_setup; struct v4l2_frequency f; if (dev->tuner_type == TUNER_ABSENT) return; memset(&tun_setup, 0, sizeof(tun_setup)); tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; tun_setup.tuner_callback = em28xx_tuner_callback; if (dev->board.radio.type) { tun_setup.type = dev->board.radio.type; tun_setup.addr = dev->board.radio_addr; v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); } if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) { tun_setup.type = dev->tuner_type; tun_setup.addr = dev->tuner_addr; v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); } if (dev->tda9887_conf) { struct v4l2_priv_tun_config tda9887_cfg; tda9887_cfg.tuner = TUNER_TDA9887; tda9887_cfg.priv = &dev->tda9887_conf; v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg); } if (dev->tuner_type == TUNER_XC2028) { struct v4l2_priv_tun_config xc2028_cfg; struct xc2028_ctrl ctl; memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); memset(&ctl, 0, sizeof(ctl)); em28xx_setup_xc3028(dev, &ctl); xc2028_cfg.tuner = TUNER_XC2028; xc2028_cfg.priv = &ctl; v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg); } /* configure tuner */ f.tuner = 0; f.type = V4L2_TUNER_ANALOG_TV; f.frequency = 9076; /* just a magic number */ dev->ctl_freq = f.frequency; v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); } static int em28xx_hint_board(struct em28xx *dev) { int i; if (dev->board.is_webcam) { if (dev->em28xx_sensor == EM28XX_MT9V011) { dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; } else if (dev->em28xx_sensor == EM28XX_MT9M001 || dev->em28xx_sensor == EM28XX_MT9M111) { dev->model = EM2750_BOARD_UNKNOWN; } /* FIXME: IMPROVE ! */ return 0; } /* HINT method: EEPROM * * This method works only for boards with eeprom. * Uses a hash of all eeprom bytes. The hash should be * unique for a vendor/tuner pair. * There are a high chance that tuners for different * video standards produce different hashes. */ for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { if (dev->hash == em28xx_eeprom_hash[i].hash) { dev->model = em28xx_eeprom_hash[i].model; dev->tuner_type = em28xx_eeprom_hash[i].tuner; em28xx_errdev("Your board has no unique USB ID.\n"); em28xx_errdev("A hint were successfully done, " "based on eeprom hash.\n"); em28xx_errdev("This method is not 100%% failproof.\n"); em28xx_errdev("If the board were missdetected, " "please email this log to:\n"); em28xx_errdev("\tV4L Mailing List " " \n"); em28xx_errdev("Board detected as %s\n", em28xx_boards[dev->model].name); return 0; } } /* HINT method: I2C attached devices * * This method works for all boards. * Uses a hash of i2c scanned devices. * Devices with the same i2c attached chips will * be considered equal. * This method is less precise than the eeprom one. */ /* user did not request i2c scanning => do it now */ if (!dev->i2c_hash) em28xx_do_i2c_scan(dev, dev->def_i2c_bus); for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { dev->model = em28xx_i2c_hash[i].model; dev->tuner_type = em28xx_i2c_hash[i].tuner; em28xx_errdev("Your board has no unique USB ID.\n"); em28xx_errdev("A hint were successfully done, " "based on i2c devicelist hash.\n"); em28xx_errdev("This method is not 100%% failproof.\n"); em28xx_errdev("If the board were missdetected, " "please email this log to:\n"); em28xx_errdev("\tV4L Mailing List " " \n"); em28xx_errdev("Board detected as %s\n", em28xx_boards[dev->model].name); return 0; } } em28xx_errdev("Your board has no unique USB ID and thus need a " "hint to be detected.\n"); em28xx_errdev("You may try to use card= insmod option to " "workaround that.\n"); em28xx_errdev("Please send an email with this log to:\n"); em28xx_errdev("\tV4L Mailing List \n"); em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash); em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash); em28xx_errdev("Here is a list of valid choices for the card=" " insmod option:\n"); for (i = 0; i < em28xx_bcount; i++) { em28xx_errdev(" card=%d -> %s\n", i, em28xx_boards[i].name); } return -1; } static void em28xx_card_setup(struct em28xx *dev) { /* * If the device can be a webcam, seek for a sensor. * If sensor is not found, then it isn't a webcam. */ if (dev->board.is_webcam) { if (em28xx_detect_sensor(dev) < 0) dev->board.is_webcam = 0; else dev->progressive = 1; } switch (dev->model) { case EM2750_BOARD_UNKNOWN: case EM2820_BOARD_UNKNOWN: case EM2800_BOARD_UNKNOWN: /* * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. * * This occurs because they share identical USB vendor and * product IDs. * * What we do here is look up the EEPROM hash of the K-WORLD * and if it is found then we decide that we do not have * a DIGIVOX and reset the device to the K-WORLD instead. * * This solution is only valid if they do not share eeprom * hash identities which has not been determined as yet. */ if (em28xx_hint_board(dev) < 0) em28xx_errdev("Board not discovered\n"); else { em28xx_set_model(dev); em28xx_pre_card_setup(dev); } break; default: em28xx_set_model(dev); } em28xx_info("Identified as %s (card=%d)\n", dev->board.name, dev->model); dev->tuner_type = em28xx_boards[dev->model].tuner_type; if (em28xx_boards[dev->model].tuner_addr) dev->tuner_addr = em28xx_boards[dev->model].tuner_addr; if (em28xx_boards[dev->model].tda9887_conf) dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; /* request some modules */ switch (dev->model) { case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: { struct tveeprom tv; if (dev->eedata == NULL) break; #if defined(CONFIG_MODULES) && defined(MODULE) request_module("tveeprom"); #endif /* Call first TVeeprom */ dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); dev->tuner_type = tv.tuner_type; if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { dev->i2s_speed = 2048000; dev->board.has_msp34xx = 1; } break; } case EM2882_BOARD_KWORLD_ATSC_315U: em28xx_write_reg(dev, 0x0d, 0x42); msleep(10); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); msleep(10); break; case EM2820_BOARD_KWORLD_PVRTV2800RF: /* GPIO enables sound on KWORLD PVR TV 2800RF */ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); break; case EM2820_BOARD_UNKNOWN: case EM2800_BOARD_UNKNOWN: /* * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. * * This occurs because they share identical USB vendor and * product IDs. * * What we do here is look up the EEPROM hash of the K-WORLD * and if it is found then we decide that we do not have * a DIGIVOX and reset the device to the K-WORLD instead. * * This solution is only valid if they do not share eeprom * hash identities which has not been determined as yet. */ case EM2880_BOARD_MSI_DIGIVOX_AD: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); /* In cases where we had to use a board hint, the call to em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, so make the call now so the analog GPIOs are set properly before probing the i2c bus. */ em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; /* * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. * * This occurs because they share identical USB vendor and * product IDs. * * What we do here is look up the EEPROM hash of the Dikom * and if it is found then we decide that we do not have * a Kworld and reset the device to the Dikom instead. * * This solution is only valid if they do not share eeprom * hash identities which has not been determined as yet. */ case EM2882_BOARD_KWORLD_VS_DVBT: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); /* In cases where we had to use a board hint, the call to em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, so make the call now so the analog GPIOs are set properly before probing the i2c bus. */ em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; } if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { em28xx_errdev("\n\n"); em28xx_errdev("The support for this board weren't " "valid yet.\n"); em28xx_errdev("Please send a report of having this working\n"); em28xx_errdev("not to V4L mailing list (and/or to other " "addresses)\n\n"); } /* Free eeprom data memory */ kfree(dev->eedata); dev->eedata = NULL; /* Allow override tuner type by a module parameter */ if (tuner >= 0) dev->tuner_type = tuner; /* request some modules */ if (dev->board.has_msp34xx) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], "msp3400", 0, msp3400_addrs); if (dev->board.decoder == EM28XX_SAA711X) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], "saa7115_auto", 0, saa711x_addrs); if (dev->board.decoder == EM28XX_TVP5150) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], "tvp5150", 0, tvp5150_addrs); if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], "tvaudio", dev->board.tvaudio_addr, NULL); if (dev->board.tuner_type != TUNER_ABSENT) { int has_demod = (dev->tda9887_conf & TDA9887_PRESENT); if (dev->board.radio.type) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], "tuner", dev->board.radio_addr, NULL); if (has_demod) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); if (dev->tuner_addr == 0) { enum v4l2_i2c_tuner_type type = has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; struct v4l2_subdev *sd; sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], "tuner", 0, v4l2_i2c_tuner_addrs(type)); if (sd) dev->tuner_addr = v4l2_i2c_subdev_addr(sd); } else { v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], "tuner", dev->tuner_addr, NULL); } } em28xx_tuner_setup(dev); em28xx_init_camera(dev); } static void request_module_async(struct work_struct *work) { struct em28xx *dev = container_of(work, struct em28xx, request_module_wk); /* * The em28xx extensions can be modules or builtin. If the * modules are already loaded or are built in, those extensions * can be initialised right now. Otherwise, the module init * code will do it. */ em28xx_init_extension(dev); #if defined(CONFIG_MODULES) && defined(MODULE) if (dev->has_audio_class) request_module("snd-usb-audio"); else if (dev->has_alsa_audio) request_module("em28xx-alsa"); if (dev->board.has_dvb) request_module("em28xx-dvb"); if (dev->board.buttons || ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) request_module("em28xx-rc"); #endif /* CONFIG_MODULES */ } static void request_modules(struct em28xx *dev) { INIT_WORK(&dev->request_module_wk, request_module_async); schedule_work(&dev->request_module_wk); } static void flush_request_modules(struct em28xx *dev) { flush_work(&dev->request_module_wk); } /* * em28xx_release_resources() * unregisters the v4l2,i2c and usb devices * called when the device gets disconnected or at module unload */ void em28xx_release_resources(struct em28xx *dev) { /*FIXME: I2C IR should be disconnected */ em28xx_release_analog_resources(dev); if (dev->def_i2c_bus) em28xx_i2c_unregister(dev, 1); em28xx_i2c_unregister(dev, 0); if (dev->clk) v4l2_clk_unregister_fixed(dev->clk); v4l2_ctrl_handler_free(&dev->ctrl_handler); v4l2_device_unregister(&dev->v4l2_dev); usb_put_dev(dev->udev); /* Mark device as unused */ clear_bit(dev->devno, &em28xx_devused); }; /* * em28xx_init_dev() * allocates and inits the device structs, registers i2c bus and v4l device */ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, struct usb_interface *interface, int minor) { struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; int retval; static const char *default_chip_name = "em28xx"; const char *chip_name = default_chip_name; dev->udev = udev; mutex_init(&dev->vb_queue_lock); mutex_init(&dev->vb_vbi_queue_lock); mutex_init(&dev->ctrl_urb_lock); spin_lock_init(&dev->slock); dev->em28xx_write_regs = em28xx_write_regs; dev->em28xx_read_reg = em28xx_read_reg; dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; dev->em28xx_write_regs_req = em28xx_write_regs_req; dev->em28xx_read_reg_req = em28xx_read_reg_req; dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; em28xx_set_model(dev); dev->wait_after_write = 5; /* Based on the Chip ID, set the device configuration */ retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); if (retval > 0) { dev->chip_id = retval; switch (dev->chip_id) { case CHIP_ID_EM2800: chip_name = "em2800"; break; case CHIP_ID_EM2710: chip_name = "em2710"; break; case CHIP_ID_EM2750: chip_name = "em2750"; break; case CHIP_ID_EM2765: chip_name = "em2765"; dev->wait_after_write = 0; dev->is_em25xx = 1; dev->eeprom_addrwidth_16bit = 1; break; case CHIP_ID_EM2820: chip_name = "em2710/2820"; if (le16_to_cpu(dev->udev->descriptor.idVendor) == 0xeb1a) { __le16 idProd = dev->udev->descriptor.idProduct; if (le16_to_cpu(idProd) == 0x2710) chip_name = "em2710"; else if (le16_to_cpu(idProd) == 0x2820) chip_name = "em2820"; } /* NOTE: the em2820 is used in webcams, too ! */ break; case CHIP_ID_EM2840: chip_name = "em2840"; break; case CHIP_ID_EM2860: chip_name = "em2860"; break; case CHIP_ID_EM2870: chip_name = "em2870"; dev->wait_after_write = 0; break; case CHIP_ID_EM2874: chip_name = "em2874"; dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; case CHIP_ID_EM28174: chip_name = "em28174"; dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; case CHIP_ID_EM2883: chip_name = "em2882/3"; dev->wait_after_write = 0; break; case CHIP_ID_EM2884: chip_name = "em2884"; dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; default: printk(KERN_INFO DRIVER_NAME ": unknown em28xx chip ID (%d)\n", dev->chip_id); } } if (chip_name != default_chip_name) printk(KERN_INFO DRIVER_NAME ": chip ID is %s\n", chip_name); /* * For em2820/em2710, the name may change latter, after checking * if the device has a sensor (so, it is em2710) or not. */ snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno); if (dev->is_audio_only) { retval = em28xx_audio_setup(dev); if (retval) return -ENODEV; em28xx_init_extension(dev); return 0; } em28xx_pre_card_setup(dev); if (!dev->board.is_em2800) { /* Resets I2C speed */ retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); if (retval < 0) { em28xx_errdev("%s: em28xx_write_reg failed!" " retval [%d]\n", __func__, retval); return retval; } } retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev); if (retval < 0) { em28xx_errdev("Call to v4l2_device_register() failed!\n"); return retval; } v4l2_ctrl_handler_init(hdl, 8); dev->v4l2_dev.ctrl_handler = hdl; rt_mutex_init(&dev->i2c_bus_lock); /* register i2c bus 0 */ if (dev->board.is_em2800) retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); else retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); if (retval < 0) { em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n", __func__, retval); goto unregister_dev; } /* register i2c bus 1 */ if (dev->def_i2c_bus) { if (dev->is_em25xx) retval = em28xx_i2c_register(dev, 1, EM28XX_I2C_ALGO_EM25XX_BUS_B); else retval = em28xx_i2c_register(dev, 1, EM28XX_I2C_ALGO_EM28XX); if (retval < 0) { em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n", __func__, retval); goto unregister_dev; } } /* * Default format, used for tvp5150 or saa711x output formats */ dev->vinmode = 0x10; dev->vinctl = EM28XX_VINCTRL_INTERLACED | EM28XX_VINCTRL_CCIR656_ENABLE; /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); /* Configure audio */ retval = em28xx_audio_setup(dev); if (retval < 0) { em28xx_errdev("%s: Error while setting audio - error [%d]!\n", __func__, retval); goto fail; } if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f); } else { /* install the em28xx notify callback */ v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE), em28xx_ctrl_notify, dev); v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME), em28xx_ctrl_notify, dev); } /* wake i2c devices */ em28xx_wake_i2c(dev); /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); INIT_LIST_HEAD(&dev->vbiq.active); if (dev->board.has_msp34xx) { /* Send a reset to other chips via gpio */ retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); if (retval < 0) { em28xx_errdev("%s: em28xx_write_reg - " "msp34xx(1) failed! error [%d]\n", __func__, retval); goto fail; } msleep(3); retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); if (retval < 0) { em28xx_errdev("%s: em28xx_write_reg - " "msp34xx(2) failed! error [%d]\n", __func__, retval); goto fail; } msleep(3); } retval = em28xx_register_analog_devices(dev); if (retval < 0) { goto fail; } /* Save some power by putting tuner to sleep */ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); return 0; fail: if (dev->def_i2c_bus) em28xx_i2c_unregister(dev, 1); em28xx_i2c_unregister(dev, 0); v4l2_ctrl_handler_free(&dev->ctrl_handler); unregister_dev: v4l2_device_unregister(&dev->v4l2_dev); return retval; } /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) /* * em28xx_usb_probe() * checks for supported devices */ static int em28xx_usb_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev; struct em28xx *dev = NULL; int retval; bool has_audio = false, has_video = false, has_dvb = false; int i, nr, try_bulk; const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; char *speed; udev = usb_get_dev(interface_to_usbdev(interface)); /* Check to see next free device and mark as used */ do { nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS); if (nr >= EM28XX_MAXBOARDS) { /* No free device slots */ printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", EM28XX_MAXBOARDS); retval = -ENOMEM; goto err_no_slot; } } while (test_and_set_bit(nr, &em28xx_devused)); /* Don't register audio interfaces */ if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { em28xx_err(DRIVER_NAME " audio device (%04x:%04x): " "interface %i, class %i\n", le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct), ifnum, interface->altsetting[0].desc.bInterfaceClass); retval = -ENODEV; goto err; } /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { em28xx_err(DRIVER_NAME ": out of memory!\n"); retval = -ENOMEM; goto err; } /* compute alternate max packet sizes */ dev->alt_max_pkt_size_isoc = kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * interface->num_altsetting, GFP_KERNEL); if (dev->alt_max_pkt_size_isoc == NULL) { em28xx_errdev("out of memory!\n"); kfree(dev); retval = -ENOMEM; goto err; } /* Get endpoints */ for (i = 0; i < interface->num_altsetting; i++) { int ep; for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { const struct usb_endpoint_descriptor *e; int sizedescr, size; e = &interface->altsetting[i].endpoint[ep].desc; sizedescr = le16_to_cpu(e->wMaxPacketSize); size = sizedescr & 0x7ff; if (udev->speed == USB_SPEED_HIGH) size = size * hb_mult(sizedescr); if (usb_endpoint_dir_in(e)) { switch (e->bEndpointAddress) { case 0x82: has_video = true; if (usb_endpoint_xfer_isoc(e)) { dev->analog_ep_isoc = e->bEndpointAddress; dev->alt_max_pkt_size_isoc[i] = size; } else if (usb_endpoint_xfer_bulk(e)) { dev->analog_ep_bulk = e->bEndpointAddress; } break; case 0x83: if (usb_endpoint_xfer_isoc(e)) { has_audio = true; } else { printk(KERN_INFO DRIVER_NAME ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); } break; case 0x84: if (has_video && (usb_endpoint_xfer_bulk(e))) { dev->analog_ep_bulk = e->bEndpointAddress; } else { if (usb_endpoint_xfer_isoc(e)) { if (size > dev->dvb_max_pkt_size_isoc) { has_dvb = true; /* see NOTE (~) */ dev->dvb_ep_isoc = e->bEndpointAddress; dev->dvb_max_pkt_size_isoc = size; dev->dvb_alt_isoc = i; } } else { has_dvb = true; dev->dvb_ep_bulk = e->bEndpointAddress; } } break; } } /* NOTE: * Old logic with support for isoc transfers only was: * 0x82 isoc => analog * 0x83 isoc => audio * 0x84 isoc => digital * * New logic with support for bulk transfers * 0x82 isoc => analog * 0x82 bulk => analog * 0x83 isoc* => audio * 0x84 isoc => digital * 0x84 bulk => analog or digital** * (*: audio should always be isoc) * (**: analog, if ep 0x82 is isoc, otherwise digital) * * The new logic preserves backwards compatibility and * reflects the endpoint configurations we have seen * so far. But there might be devices for which this * logic is not sufficient... */ /* * NOTE (~): some manufacturers (e.g. Terratec) disable * endpoints by setting wMaxPacketSize to 0 bytes for * all alt settings. So far, we've seen this for * DVB isoc endpoints only. */ } } if (!(has_audio || has_video || has_dvb)) { retval = -ENODEV; goto err_free; } switch (udev->speed) { case USB_SPEED_LOW: speed = "1.5"; break; case USB_SPEED_UNKNOWN: case USB_SPEED_FULL: speed = "12"; break; case USB_SPEED_HIGH: speed = "480"; break; default: speed = "unknown"; } printk(KERN_INFO DRIVER_NAME ": New device %s %s @ %s Mbps " "(%04x:%04x, interface %d, class %d)\n", udev->manufacturer ? udev->manufacturer : "", udev->product ? udev->product : "", speed, le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct), ifnum, interface->altsetting->desc.bInterfaceNumber); /* * Make sure we have 480 Mbps of bandwidth, otherwise things like * video stream wouldn't likely work, since 12 Mbps is generally * not enough even for most Digital TV streams. */ if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { printk(DRIVER_NAME ": Device initialization failed.\n"); printk(DRIVER_NAME ": Device must be connected to a high-speed" " USB 2.0 port.\n"); retval = -ENODEV; goto err_free; } dev->devno = nr; dev->model = id->driver_info; dev->alt = -1; dev->is_audio_only = has_audio && !(has_video || has_dvb); dev->has_alsa_audio = has_audio; dev->audio_ifnum = ifnum; /* Checks if audio is provided by some interface */ for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { struct usb_interface *uif = udev->config->interface[i]; if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { dev->has_audio_class = 1; break; } } if (has_audio) printk(KERN_INFO DRIVER_NAME ": Audio interface %i found %s\n", ifnum, dev->has_audio_class ? "(USB Audio Class)" : "(Vendor Class)"); if (has_video) printk(KERN_INFO DRIVER_NAME ": Video interface %i found:%s%s\n", ifnum, dev->analog_ep_bulk ? " bulk" : "", dev->analog_ep_isoc ? " isoc" : ""); if (has_dvb) printk(KERN_INFO DRIVER_NAME ": DVB interface %i found:%s%s\n", ifnum, dev->dvb_ep_bulk ? " bulk" : "", dev->dvb_ep_isoc ? " isoc" : ""); dev->num_alt = interface->num_altsetting; if ((unsigned)card[nr] < em28xx_bcount) dev->model = card[nr]; /* save our data pointer in this interface device */ usb_set_intfdata(interface, dev); /* initialize videobuf2 stuff */ em28xx_vb2_setup(dev); /* allocate device struct */ mutex_init(&dev->lock); mutex_lock(&dev->lock); retval = em28xx_init_dev(dev, udev, interface, nr); if (retval) { goto unlock_and_free; } if (usb_xfer_mode < 0) { if (dev->board.is_webcam) try_bulk = 1; else try_bulk = 0; } else { try_bulk = usb_xfer_mode > 0; } /* Select USB transfer types to use */ if (has_video) { if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) dev->analog_xfer_bulk = 1; em28xx_info("analog set to %s mode.\n", dev->analog_xfer_bulk ? "bulk" : "isoc"); } if (has_dvb) { if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) dev->dvb_xfer_bulk = 1; em28xx_info("dvb set to %s mode.\n", dev->dvb_xfer_bulk ? "bulk" : "isoc"); /* pre-allocate DVB usb transfer buffers */ if (dev->dvb_xfer_bulk) { retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, dev->dvb_xfer_bulk, EM28XX_DVB_NUM_BUFS, 512, EM28XX_DVB_BULK_PACKET_MULTIPLIER); } else { retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, dev->dvb_xfer_bulk, EM28XX_DVB_NUM_BUFS, dev->dvb_max_pkt_size_isoc, EM28XX_DVB_NUM_ISOC_PACKETS); } if (retval) { printk(DRIVER_NAME ": Failed to pre-allocate USB transfer buffers for DVB.\n"); goto unlock_and_free; } } request_modules(dev); /* Should be the last thing to do, to avoid newer udev's to open the device before fully initializing it */ mutex_unlock(&dev->lock); return 0; unlock_and_free: mutex_unlock(&dev->lock); err_free: kfree(dev->alt_max_pkt_size_isoc); kfree(dev); err: clear_bit(nr, &em28xx_devused); err_no_slot: usb_put_dev(udev); return retval; } /* * em28xx_usb_disconnect() * called when the device gets disconnected * video device will be unregistered on v4l2_close in case it is still open */ static void em28xx_usb_disconnect(struct usb_interface *interface) { struct em28xx *dev; dev = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); if (!dev) return; dev->disconnected = 1; if (dev->is_audio_only) { mutex_lock(&dev->lock); em28xx_close_extension(dev); mutex_unlock(&dev->lock); return; } em28xx_info("disconnecting %s\n", dev->vdev->name); flush_request_modules(dev); mutex_lock(&dev->lock); v4l2_device_disconnect(&dev->v4l2_dev); if (dev->users) { em28xx_warn("device %s is open! Deregistration and memory deallocation are deferred on close.\n", video_device_node_name(dev->vdev)); em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE); em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE); } em28xx_close_extension(dev); /* NOTE: must be called BEFORE the resources are released */ if (!dev->users) em28xx_release_resources(dev); mutex_unlock(&dev->lock); if (!dev->users) { kfree(dev->alt_max_pkt_size_isoc); kfree(dev); } } static struct usb_driver em28xx_usb_driver = { .name = "em28xx", .probe = em28xx_usb_probe, .disconnect = em28xx_usb_disconnect, .id_table = em28xx_id_table, }; module_usb_driver(em28xx_usb_driver);