/* * smsc47m1.c - Part of lm_sensors, Linux kernel modules * for hardware monitoring * * Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x, * LPC47M14x, LPC47M15x, LPC47M192, LPC47M292 and LPC47M997 * Super-I/O chips. * * Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> * Copyright (C) 2004-2007 Jean Delvare <jdelvare@suse.de> * Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com> * and Jean Delvare * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/module.h> #include <linux/slab.h> #include <linux/ioport.h> #include <linux/jiffies.h> #include <linux/platform_device.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/init.h> #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/acpi.h> #include <linux/io.h> static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); static struct platform_device *pdev; #define DRVNAME "smsc47m1" enum chips { smsc47m1, smsc47m2 }; /* Super-I/0 registers and commands */ #define REG 0x2e /* The register to read/write */ #define VAL 0x2f /* The value to read/write */ static inline void superio_outb(int reg, int val) { outb(reg, REG); outb(val, VAL); } static inline int superio_inb(int reg) { outb(reg, REG); return inb(VAL); } /* logical device for fans is 0x0A */ #define superio_select() superio_outb(0x07, 0x0A) static inline void superio_enter(void) { outb(0x55, REG); } static inline void superio_exit(void) { outb(0xAA, REG); } #define SUPERIO_REG_ACT 0x30 #define SUPERIO_REG_BASE 0x60 #define SUPERIO_REG_DEVID 0x20 #define SUPERIO_REG_DEVREV 0x21 /* Logical device registers */ #define SMSC_EXTENT 0x80 /* nr is 0 or 1 in the macros below */ #define SMSC47M1_REG_ALARM 0x04 #define SMSC47M1_REG_TPIN(nr) (0x34 - (nr)) #define SMSC47M1_REG_PPIN(nr) (0x36 - (nr)) #define SMSC47M1_REG_FANDIV 0x58 static const u8 SMSC47M1_REG_FAN[3] = { 0x59, 0x5a, 0x6b }; static const u8 SMSC47M1_REG_FAN_PRELOAD[3] = { 0x5b, 0x5c, 0x6c }; static const u8 SMSC47M1_REG_PWM[3] = { 0x56, 0x57, 0x69 }; #define SMSC47M2_REG_ALARM6 0x09 #define SMSC47M2_REG_TPIN1 0x38 #define SMSC47M2_REG_TPIN2 0x37 #define SMSC47M2_REG_TPIN3 0x2d #define SMSC47M2_REG_PPIN3 0x2c #define SMSC47M2_REG_FANDIV3 0x6a #define MIN_FROM_REG(reg, div) ((reg) >= 192 ? 0 : \ 983040 / ((192 - (reg)) * (div))) #define FAN_FROM_REG(reg, div, preload) ((reg) <= (preload) || (reg) == 255 ? \ 0 : \ 983040 / (((reg) - (preload)) * (div))) #define DIV_FROM_REG(reg) (1 << (reg)) #define PWM_FROM_REG(reg) (((reg) & 0x7E) << 1) #define PWM_EN_FROM_REG(reg) ((~(reg)) & 0x01) #define PWM_TO_REG(reg) (((reg) >> 1) & 0x7E) struct smsc47m1_data { unsigned short addr; const char *name; enum chips type; struct device *hwmon_dev; struct mutex update_lock; unsigned long last_updated; /* In jiffies */ u8 fan[3]; /* Register value */ u8 fan_preload[3]; /* Register value */ u8 fan_div[3]; /* Register encoding, shifted right */ u8 alarms; /* Register encoding */ u8 pwm[3]; /* Register value (bit 0 is disable) */ }; struct smsc47m1_sio_data { enum chips type; u8 activate; /* Remember initial device state */ }; static inline int smsc47m1_read_value(struct smsc47m1_data *data, u8 reg) { return inb_p(data->addr + reg); } static inline void smsc47m1_write_value(struct smsc47m1_data *data, u8 reg, u8 value) { outb_p(value, data->addr + reg); } static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, int init) { struct smsc47m1_data *data = dev_get_drvdata(dev); mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) { int i, fan_nr; fan_nr = data->type == smsc47m2 ? 3 : 2; for (i = 0; i < fan_nr; i++) { data->fan[i] = smsc47m1_read_value(data, SMSC47M1_REG_FAN[i]); data->fan_preload[i] = smsc47m1_read_value(data, SMSC47M1_REG_FAN_PRELOAD[i]); data->pwm[i] = smsc47m1_read_value(data, SMSC47M1_REG_PWM[i]); } i = smsc47m1_read_value(data, SMSC47M1_REG_FANDIV); data->fan_div[0] = (i >> 4) & 0x03; data->fan_div[1] = i >> 6; data->alarms = smsc47m1_read_value(data, SMSC47M1_REG_ALARM) >> 6; /* Clear alarms if needed */ if (data->alarms) smsc47m1_write_value(data, SMSC47M1_REG_ALARM, 0xC0); if (fan_nr >= 3) { data->fan_div[2] = (smsc47m1_read_value(data, SMSC47M2_REG_FANDIV3) >> 4) & 0x03; data->alarms |= (smsc47m1_read_value(data, SMSC47M2_REG_ALARM6) & 0x40) >> 4; /* Clear alarm if needed */ if (data->alarms & 0x04) smsc47m1_write_value(data, SMSC47M2_REG_ALARM6, 0x40); } data->last_updated = jiffies; } mutex_unlock(&data->update_lock); return data; } static ssize_t get_fan(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); int nr = attr->index; /* * This chip (stupidly) stops monitoring fan speed if PWM is * enabled and duty cycle is 0%. This is fine if the monitoring * and control concern the same fan, but troublesome if they are * not (which could as well happen). */ int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 : FAN_FROM_REG(data->fan[nr], DIV_FROM_REG(data->fan_div[nr]), data->fan_preload[nr]); return sprintf(buf, "%d\n", rpm); } static ssize_t get_fan_min(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); int nr = attr->index; int rpm = MIN_FROM_REG(data->fan_preload[nr], DIV_FROM_REG(data->fan_div[nr])); return sprintf(buf, "%d\n", rpm); } static ssize_t get_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); } static ssize_t get_fan_alarm(struct device *dev, struct device_attribute *devattr, char *buf) { int bitnr = to_sensor_dev_attr(devattr)->index; struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } static ssize_t get_pwm(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[attr->index])); } static ssize_t get_pwm_en(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[attr->index])); } static ssize_t get_alarms(struct device *dev, struct device_attribute *devattr, char *buf) { struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); return sprintf(buf, "%d\n", data->alarms); } static ssize_t set_fan_min(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = dev_get_drvdata(dev); int nr = attr->index; long rpmdiv; long val; int err; err = kstrtol(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]); if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) { mutex_unlock(&data->update_lock); return -EINVAL; } data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv); smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr], data->fan_preload[nr]); mutex_unlock(&data->update_lock); return count; } /* * Note: we save and restore the fan minimum here, because its value is * determined in part by the fan clock divider. This follows the principle * of least surprise; the user doesn't expect the fan minimum to change just * because the divider changed. */ static ssize_t set_fan_div(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = dev_get_drvdata(dev); int nr = attr->index; long new_div; int err; long tmp; u8 old_div = DIV_FROM_REG(data->fan_div[nr]); err = kstrtol(buf, 10, &new_div); if (err) return err; if (new_div == old_div) /* No change */ return count; mutex_lock(&data->update_lock); switch (new_div) { case 1: data->fan_div[nr] = 0; break; case 2: data->fan_div[nr] = 1; break; case 4: data->fan_div[nr] = 2; break; case 8: data->fan_div[nr] = 3; break; default: mutex_unlock(&data->update_lock); return -EINVAL; } switch (nr) { case 0: case 1: tmp = smsc47m1_read_value(data, SMSC47M1_REG_FANDIV) & ~(0x03 << (4 + 2 * nr)); tmp |= data->fan_div[nr] << (4 + 2 * nr); smsc47m1_write_value(data, SMSC47M1_REG_FANDIV, tmp); break; case 2: tmp = smsc47m1_read_value(data, SMSC47M2_REG_FANDIV3) & 0xCF; tmp |= data->fan_div[2] << 4; smsc47m1_write_value(data, SMSC47M2_REG_FANDIV3, tmp); break; } /* Preserve fan min */ tmp = 192 - (old_div * (192 - data->fan_preload[nr]) + new_div / 2) / new_div; data->fan_preload[nr] = clamp_val(tmp, 0, 191); smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr], data->fan_preload[nr]); mutex_unlock(&data->update_lock); return count; } static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = dev_get_drvdata(dev); int nr = attr->index; long val; int err; err = kstrtol(buf, 10, &val); if (err) return err; if (val < 0 || val > 255) return -EINVAL; mutex_lock(&data->update_lock); data->pwm[nr] &= 0x81; /* Preserve additional bits */ data->pwm[nr] |= PWM_TO_REG(val); smsc47m1_write_value(data, SMSC47M1_REG_PWM[nr], data->pwm[nr]); mutex_unlock(&data->update_lock); return count; } static ssize_t set_pwm_en(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct smsc47m1_data *data = dev_get_drvdata(dev); int nr = attr->index; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err) return err; if (val > 1) return -EINVAL; mutex_lock(&data->update_lock); data->pwm[nr] &= 0xFE; /* preserve the other bits */ data->pwm[nr] |= !val; smsc47m1_write_value(data, SMSC47M1_REG_PWM[nr], data->pwm[nr]); mutex_unlock(&data->update_lock); return count; } #define fan_present(offset) \ static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan, \ NULL, offset - 1); \ static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ get_fan_min, set_fan_min, offset - 1); \ static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ get_fan_div, set_fan_div, offset - 1); \ static SENSOR_DEVICE_ATTR(fan##offset##_alarm, S_IRUGO, get_fan_alarm, \ NULL, offset - 1); \ static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ get_pwm, set_pwm, offset - 1); \ static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ get_pwm_en, set_pwm_en, offset - 1) fan_present(1); fan_present(2); fan_present(3); static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL); static ssize_t show_name(struct device *dev, struct device_attribute *devattr, char *buf) { struct smsc47m1_data *data = dev_get_drvdata(dev); return sprintf(buf, "%s\n", data->name); } static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); static struct attribute *smsc47m1_attributes_fan1[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan1_min.dev_attr.attr, &sensor_dev_attr_fan1_div.dev_attr.attr, &sensor_dev_attr_fan1_alarm.dev_attr.attr, NULL }; static const struct attribute_group smsc47m1_group_fan1 = { .attrs = smsc47m1_attributes_fan1, }; static struct attribute *smsc47m1_attributes_fan2[] = { &sensor_dev_attr_fan2_input.dev_attr.attr, &sensor_dev_attr_fan2_min.dev_attr.attr, &sensor_dev_attr_fan2_div.dev_attr.attr, &sensor_dev_attr_fan2_alarm.dev_attr.attr, NULL }; static const struct attribute_group smsc47m1_group_fan2 = { .attrs = smsc47m1_attributes_fan2, }; static struct attribute *smsc47m1_attributes_fan3[] = { &sensor_dev_attr_fan3_input.dev_attr.attr, &sensor_dev_attr_fan3_min.dev_attr.attr, &sensor_dev_attr_fan3_div.dev_attr.attr, &sensor_dev_attr_fan3_alarm.dev_attr.attr, NULL }; static const struct attribute_group smsc47m1_group_fan3 = { .attrs = smsc47m1_attributes_fan3, }; static struct attribute *smsc47m1_attributes_pwm1[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, NULL }; static const struct attribute_group smsc47m1_group_pwm1 = { .attrs = smsc47m1_attributes_pwm1, }; static struct attribute *smsc47m1_attributes_pwm2[] = { &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, NULL }; static const struct attribute_group smsc47m1_group_pwm2 = { .attrs = smsc47m1_attributes_pwm2, }; static struct attribute *smsc47m1_attributes_pwm3[] = { &sensor_dev_attr_pwm3.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, NULL }; static const struct attribute_group smsc47m1_group_pwm3 = { .attrs = smsc47m1_attributes_pwm3, }; static struct attribute *smsc47m1_attributes[] = { &dev_attr_alarms.attr, &dev_attr_name.attr, NULL }; static const struct attribute_group smsc47m1_group = { .attrs = smsc47m1_attributes, }; static int __init smsc47m1_find(struct smsc47m1_sio_data *sio_data) { u8 val; unsigned short addr; superio_enter(); val = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID); /* * SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x * (device id 0x5F) and LPC47B27x (device id 0x51) have fan control. * The LPC47M15x and LPC47M192 chips "with hardware monitoring block" * can do much more besides (device id 0x60). * The LPC47M997 is undocumented, but seems to be compatible with * the LPC47M192, and has the same device id. * The LPC47M292 (device id 0x6B) is somewhat compatible, but it * supports a 3rd fan, and the pin configuration registers are * unfortunately different. * The LPC47M233 has the same device id (0x6B) but is not compatible. * We check the high bit of the device revision register to * differentiate them. */ switch (val) { case 0x51: pr_info("Found SMSC LPC47B27x\n"); sio_data->type = smsc47m1; break; case 0x59: pr_info("Found SMSC LPC47M10x/LPC47M112/LPC47M13x\n"); sio_data->type = smsc47m1; break; case 0x5F: pr_info("Found SMSC LPC47M14x\n"); sio_data->type = smsc47m1; break; case 0x60: pr_info("Found SMSC LPC47M15x/LPC47M192/LPC47M997\n"); sio_data->type = smsc47m1; break; case 0x6B: if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) { pr_debug("Found SMSC LPC47M233, unsupported\n"); superio_exit(); return -ENODEV; } pr_info("Found SMSC LPC47M292\n"); sio_data->type = smsc47m2; break; default: superio_exit(); return -ENODEV; } superio_select(); addr = (superio_inb(SUPERIO_REG_BASE) << 8) | superio_inb(SUPERIO_REG_BASE + 1); if (addr == 0) { pr_info("Device address not set, will not use\n"); superio_exit(); return -ENODEV; } /* * Enable only if address is set (needed at least on the * Compaq Presario S4000NX) */ sio_data->activate = superio_inb(SUPERIO_REG_ACT); if ((sio_data->activate & 0x01) == 0) { pr_info("Enabling device\n"); superio_outb(SUPERIO_REG_ACT, sio_data->activate | 0x01); } superio_exit(); return addr; } /* Restore device to its initial state */ static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data) { if ((sio_data->activate & 0x01) == 0) { superio_enter(); superio_select(); pr_info("Disabling device\n"); superio_outb(SUPERIO_REG_ACT, sio_data->activate); superio_exit(); } } #define CHECK 1 #define REQUEST 2 /* * This function can be used to: * - test for resource conflicts with ACPI * - request the resources * We only allocate the I/O ports we really need, to minimize the risk of * conflicts with ACPI or with other drivers. */ static int __init smsc47m1_handle_resources(unsigned short address, enum chips type, int action, struct device *dev) { static const u8 ports_m1[] = { /* register, region length */ 0x04, 1, 0x33, 4, 0x56, 7, }; static const u8 ports_m2[] = { /* register, region length */ 0x04, 1, 0x09, 1, 0x2c, 2, 0x35, 4, 0x56, 7, 0x69, 4, }; int i, ports_size, err; const u8 *ports; switch (type) { case smsc47m1: default: ports = ports_m1; ports_size = ARRAY_SIZE(ports_m1); break; case smsc47m2: ports = ports_m2; ports_size = ARRAY_SIZE(ports_m2); break; } for (i = 0; i + 1 < ports_size; i += 2) { unsigned short start = address + ports[i]; unsigned short len = ports[i + 1]; switch (action) { case CHECK: /* Only check for conflicts */ err = acpi_check_region(start, len, DRVNAME); if (err) return err; break; case REQUEST: /* Request the resources */ if (!devm_request_region(dev, start, len, DRVNAME)) { dev_err(dev, "Region 0x%hx-0x%hx already in use!\n", start, start + len); return -EBUSY; } break; } } return 0; } static void smsc47m1_remove_files(struct device *dev) { sysfs_remove_group(&dev->kobj, &smsc47m1_group); sysfs_remove_group(&dev->kobj, &smsc47m1_group_fan1); sysfs_remove_group(&dev->kobj, &smsc47m1_group_fan2); sysfs_remove_group(&dev->kobj, &smsc47m1_group_fan3); sysfs_remove_group(&dev->kobj, &smsc47m1_group_pwm1); sysfs_remove_group(&dev->kobj, &smsc47m1_group_pwm2); sysfs_remove_group(&dev->kobj, &smsc47m1_group_pwm3); } static int __init smsc47m1_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct smsc47m1_sio_data *sio_data = dev_get_platdata(dev); struct smsc47m1_data *data; struct resource *res; int err; int fan1, fan2, fan3, pwm1, pwm2, pwm3; static const char * const names[] = { "smsc47m1", "smsc47m2", }; res = platform_get_resource(pdev, IORESOURCE_IO, 0); err = smsc47m1_handle_resources(res->start, sio_data->type, REQUEST, dev); if (err < 0) return err; data = devm_kzalloc(dev, sizeof(struct smsc47m1_data), GFP_KERNEL); if (!data) return -ENOMEM; data->addr = res->start; data->type = sio_data->type; data->name = names[sio_data->type]; mutex_init(&data->update_lock); platform_set_drvdata(pdev, data); /* * If no function is properly configured, there's no point in * actually registering the chip. */ pwm1 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(0)) & 0x05) == 0x04; pwm2 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(1)) & 0x05) == 0x04; if (data->type == smsc47m2) { fan1 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN1) & 0x0d) == 0x09; fan2 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN2) & 0x0d) == 0x09; fan3 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN3) & 0x0d) == 0x0d; pwm3 = (smsc47m1_read_value(data, SMSC47M2_REG_PPIN3) & 0x0d) == 0x08; } else { fan1 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(0)) & 0x05) == 0x05; fan2 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(1)) & 0x05) == 0x05; fan3 = 0; pwm3 = 0; } if (!(fan1 || fan2 || fan3 || pwm1 || pwm2 || pwm3)) { dev_warn(dev, "Device not configured, will not use\n"); return -ENODEV; } /* * Some values (fan min, clock dividers, pwm registers) may be * needed before any update is triggered, so we better read them * at least once here. We don't usually do it that way, but in * this particular case, manually reading 5 registers out of 8 * doesn't make much sense and we're better using the existing * function. */ smsc47m1_update_device(dev, 1); /* Register sysfs hooks */ if (fan1) { err = sysfs_create_group(&dev->kobj, &smsc47m1_group_fan1); if (err) goto error_remove_files; } else dev_dbg(dev, "Fan 1 not enabled by hardware, skipping\n"); if (fan2) { err = sysfs_create_group(&dev->kobj, &smsc47m1_group_fan2); if (err) goto error_remove_files; } else dev_dbg(dev, "Fan 2 not enabled by hardware, skipping\n"); if (fan3) { err = sysfs_create_group(&dev->kobj, &smsc47m1_group_fan3); if (err) goto error_remove_files; } else if (data->type == smsc47m2) dev_dbg(dev, "Fan 3 not enabled by hardware, skipping\n"); if (pwm1) { err = sysfs_create_group(&dev->kobj, &smsc47m1_group_pwm1); if (err) goto error_remove_files; } else dev_dbg(dev, "PWM 1 not enabled by hardware, skipping\n"); if (pwm2) { err = sysfs_create_group(&dev->kobj, &smsc47m1_group_pwm2); if (err) goto error_remove_files; } else dev_dbg(dev, "PWM 2 not enabled by hardware, skipping\n"); if (pwm3) { err = sysfs_create_group(&dev->kobj, &smsc47m1_group_pwm3); if (err) goto error_remove_files; } else if (data->type == smsc47m2) dev_dbg(dev, "PWM 3 not enabled by hardware, skipping\n"); err = sysfs_create_group(&dev->kobj, &smsc47m1_group); if (err) goto error_remove_files; data->hwmon_dev = hwmon_device_register(dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto error_remove_files; } return 0; error_remove_files: smsc47m1_remove_files(dev); return err; } static int __exit smsc47m1_remove(struct platform_device *pdev) { struct smsc47m1_data *data = platform_get_drvdata(pdev); hwmon_device_unregister(data->hwmon_dev); smsc47m1_remove_files(&pdev->dev); return 0; } static struct platform_driver smsc47m1_driver = { .driver = { .name = DRVNAME, }, .remove = __exit_p(smsc47m1_remove), }; static int __init smsc47m1_device_add(unsigned short address, const struct smsc47m1_sio_data *sio_data) { struct resource res = { .start = address, .end = address + SMSC_EXTENT - 1, .name = DRVNAME, .flags = IORESOURCE_IO, }; int err; err = smsc47m1_handle_resources(address, sio_data->type, CHECK, NULL); if (err) goto exit; pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; pr_err("Device allocation failed\n"); goto exit; } err = platform_device_add_resources(pdev, &res, 1); if (err) { pr_err("Device resource addition failed (%d)\n", err); goto exit_device_put; } err = platform_device_add_data(pdev, sio_data, sizeof(struct smsc47m1_sio_data)); if (err) { pr_err("Platform data allocation failed\n"); goto exit_device_put; } err = platform_device_add(pdev); if (err) { pr_err("Device addition failed (%d)\n", err); goto exit_device_put; } return 0; exit_device_put: platform_device_put(pdev); exit: return err; } static int __init sm_smsc47m1_init(void) { int err; unsigned short address; struct smsc47m1_sio_data sio_data; err = smsc47m1_find(&sio_data); if (err < 0) return err; address = err; /* Sets global pdev as a side effect */ err = smsc47m1_device_add(address, &sio_data); if (err) return err; err = platform_driver_probe(&smsc47m1_driver, smsc47m1_probe); if (err) goto exit_device; return 0; exit_device: platform_device_unregister(pdev); smsc47m1_restore(&sio_data); return err; } static void __exit sm_smsc47m1_exit(void) { platform_driver_unregister(&smsc47m1_driver); smsc47m1_restore(dev_get_platdata(&pdev->dev)); platform_device_unregister(pdev); } MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver"); MODULE_LICENSE("GPL"); module_init(sm_smsc47m1_init); module_exit(sm_smsc47m1_exit);