/* * Speyside audio support * * Copyright 2011 Wolfson Microelectronics * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include #include #include #include #include "../codecs/wm8915.h" #include "../codecs/wm9081.h" #define WM8915_HPSEL_GPIO 214 static int speyside_set_bias_level(struct snd_soc_card *card, enum snd_soc_bias_level level) { struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai; int ret; switch (level) { case SND_SOC_BIAS_STANDBY: ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_MCLK2, 32768, SND_SOC_CLOCK_IN); if (ret < 0) return ret; ret = snd_soc_dai_set_pll(codec_dai, WM8915_FLL_MCLK2, 0, 0, 0); if (ret < 0) { pr_err("Failed to stop FLL\n"); return ret; } default: break; } return 0; } static int speyside_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct snd_soc_dai *codec_dai = rtd->codec_dai; int ret; ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); if (ret < 0) return ret; ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); if (ret < 0) return ret; ret = snd_soc_dai_set_pll(codec_dai, 0, WM8915_FLL_MCLK2, 32768, 256 * 48000); if (ret < 0) return ret; ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_FLL, 256 * 48000, SND_SOC_CLOCK_IN); if (ret < 0) return ret; return 0; } static struct snd_soc_ops speyside_ops = { .hw_params = speyside_hw_params, }; static struct snd_soc_jack speyside_headset; /* Headset jack detection DAPM pins */ static struct snd_soc_jack_pin speyside_headset_pins[] = { { .pin = "Headset Mic", .mask = SND_JACK_MICROPHONE, }, { .pin = "Headphone", .mask = SND_JACK_HEADPHONE, }, }; /* Default the headphone selection to active high */ static int speyside_jack_polarity; static int speyside_get_micbias(struct snd_soc_dapm_widget *source, struct snd_soc_dapm_widget *sink) { if (speyside_jack_polarity && (strcmp(source->name, "MICB1") == 0)) return 1; if (!speyside_jack_polarity && (strcmp(source->name, "MICB2") == 0)) return 1; return 0; } static void speyside_set_polarity(struct snd_soc_codec *codec, int polarity) { speyside_jack_polarity = !polarity; gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity); /* Re-run DAPM to make sure we're using the correct mic bias */ snd_soc_dapm_sync(&codec->dapm); } static int speyside_wm8915_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_dai *dai = rtd->codec_dai; struct snd_soc_codec *codec = rtd->codec; int ret; ret = snd_soc_dai_set_sysclk(dai, WM8915_SYSCLK_MCLK2, 32768, 0); if (ret < 0) return ret; ret = gpio_request(WM8915_HPSEL_GPIO, "HP_SEL"); if (ret != 0) pr_err("Failed to request HP_SEL GPIO: %d\n", ret); gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity); ret = snd_soc_jack_new(codec, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0, &speyside_headset); if (ret) return ret; ret = snd_soc_jack_add_pins(&speyside_headset, ARRAY_SIZE(speyside_headset_pins), speyside_headset_pins); if (ret) return ret; wm8915_detect(codec, &speyside_headset, speyside_set_polarity); return 0; } static int speyside_late_probe(struct snd_soc_card *card) { snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone"); snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic"); snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC"); snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC"); snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output"); snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input"); return 0; } static struct snd_soc_dai_link speyside_dai[] = { { .name = "CPU", .stream_name = "CPU", .cpu_dai_name = "samsung-i2s.0", .codec_dai_name = "wm8915-aif1", .platform_name = "samsung-audio", .codec_name = "wm8915.1-001a", .init = speyside_wm8915_init, .ops = &speyside_ops, }, { .name = "Baseband", .stream_name = "Baseband", .cpu_dai_name = "wm8915-aif2", .codec_dai_name = "wm1250-ev1", .codec_name = "wm1250-ev1.1-0027", .ops = &speyside_ops, .ignore_suspend = 1, }, }; static int speyside_wm9081_init(struct snd_soc_dapm_context *dapm) { snd_soc_dapm_nc_pin(dapm, "LINEOUT"); /* At any time the WM9081 is active it will have this clock */ return snd_soc_codec_set_sysclk(dapm->codec, WM9081_SYSCLK_MCLK, 48000 * 256, 0); } static struct snd_soc_aux_dev speyside_aux_dev[] = { { .name = "wm9081", .codec_name = "wm9081.1-006c", .init = speyside_wm9081_init, }, }; static struct snd_soc_codec_conf speyside_codec_conf[] = { { .dev_name = "wm9081.1-006c", .name_prefix = "Sub", }, }; static const struct snd_kcontrol_new controls[] = { SOC_DAPM_PIN_SWITCH("Main Speaker"), SOC_DAPM_PIN_SWITCH("Main DMIC"), SOC_DAPM_PIN_SWITCH("Main AMIC"), SOC_DAPM_PIN_SWITCH("WM1250 Input"), SOC_DAPM_PIN_SWITCH("WM1250 Output"), }; static struct snd_soc_dapm_widget widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), SND_SOC_DAPM_SPK("Main Speaker", NULL), SND_SOC_DAPM_MIC("Main AMIC", NULL), SND_SOC_DAPM_MIC("Main DMIC", NULL), }; static struct snd_soc_dapm_route audio_paths[] = { { "IN1RN", NULL, "MICB1" }, { "IN1RP", NULL, "MICB1" }, { "IN1RN", NULL, "MICB2" }, { "IN1RP", NULL, "MICB2" }, { "MICB1", NULL, "Headset Mic", speyside_get_micbias }, { "MICB2", NULL, "Headset Mic", speyside_get_micbias }, { "IN1LP", NULL, "MICB2" }, { "IN1RN", NULL, "MICB1" }, { "MICB2", NULL, "Main AMIC" }, { "DMIC1DAT", NULL, "MICB1" }, { "DMIC2DAT", NULL, "MICB1" }, { "MICB1", NULL, "Main DMIC" }, { "Headphone", NULL, "HPOUT1L" }, { "Headphone", NULL, "HPOUT1R" }, { "Sub IN1", NULL, "HPOUT2L" }, { "Sub IN2", NULL, "HPOUT2R" }, { "Main Speaker", NULL, "Sub SPKN" }, { "Main Speaker", NULL, "Sub SPKP" }, { "Main Speaker", NULL, "SPKDAT" }, }; static struct snd_soc_card speyside = { .name = "Speyside", .dai_link = speyside_dai, .num_links = ARRAY_SIZE(speyside_dai), .aux_dev = speyside_aux_dev, .num_aux_devs = ARRAY_SIZE(speyside_aux_dev), .codec_conf = speyside_codec_conf, .num_configs = ARRAY_SIZE(speyside_codec_conf), .set_bias_level = speyside_set_bias_level, .controls = controls, .num_controls = ARRAY_SIZE(controls), .dapm_widgets = widgets, .num_dapm_widgets = ARRAY_SIZE(widgets), .dapm_routes = audio_paths, .num_dapm_routes = ARRAY_SIZE(audio_paths), .late_probe = speyside_late_probe, }; static __devinit int speyside_probe(struct platform_device *pdev) { struct snd_soc_card *card = &speyside; int ret; card->dev = &pdev->dev; ret = snd_soc_register_card(card); if (ret) { dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); return ret; } return 0; } static int __devexit speyside_remove(struct platform_device *pdev) { struct snd_soc_card *card = platform_get_drvdata(pdev); snd_soc_unregister_card(card); return 0; } static struct platform_driver speyside_driver = { .driver = { .name = "speyside", .owner = THIS_MODULE, .pm = &snd_soc_pm_ops, }, .probe = speyside_probe, .remove = __devexit_p(speyside_remove), }; static int __init speyside_audio_init(void) { return platform_driver_register(&speyside_driver); } module_init(speyside_audio_init); static void __exit speyside_audio_exit(void) { platform_driver_unregister(&speyside_driver); } module_exit(speyside_audio_exit); MODULE_DESCRIPTION("Speyside audio support"); MODULE_AUTHOR("Mark Brown "); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:speyside");