pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200527084326.4131-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to configure the GPI pins to the specific configuration.
The pins can be disabled or be configured as data input for any of the
digital mic channels. In addition the GPI can be used a a general
purpose input, a Master clock input or an ASI input for daisy chaining
devices.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200526200917.10385-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an array property that configures the General Purpose Input (GPI)
register. The device has 4 GPI pins and each pin can be configured in 1
of 7 different ways.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200526200917.10385-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200527084610.4790-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
On probe and reset, we should not touch the SHIM_IMRD register since
it is configured by firmware.
The driver only configures SHIM_IMRX with the BUSY interrupt enabled
by default and DONE interrupt disabled. When sending an IPC message,
the DONE interrupt is enabled until the DSP response is provided.
This sequence hardens the IPC communication and avoid
interrupt-related issues when adding/removing modules or during system
suspend-resume transitions.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200526203640.25980-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSP may send the same interrupt multiple times before it's handled
in the interrupt thread. Rather than masking it in the thread, mask it
in the handler directly.
This patch also removes useless checks that cannot happen, and masks
that are set don't need to be re-tested.
Suggested-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/1492
Link: https://lore.kernel.org/r/20200526203640.25980-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add .remove op that disables interrupts and reset the DSP
for BYT and CHT platforms.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200526203640.25980-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We currently ignore the reply messages from the DSP
when they are not expected but call it out as an error.
Change the error message to a debug message.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200526203640.25980-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add required .pm_ops to support suspend/resume on baytrail/cherrytrail
machines.
This .pm_ops is conditionally-added to avoid impacting the legacy
driver where power management is handled differently.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200526203640.25980-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Low-power playback was never enabled on Baytrail devices, remove what
looks like copy/paste from other machine drivers which were never
submitted upstream.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200526203640.25980-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new case when set_power_state() is not supported, e.g. for Intel
Baytrail/Cherrytrail legacy platforms.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200526203640.25980-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200525071732.5887-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Function "pm_runtime_get_sync()" is not handled by "pm_runtime_put()"
if "PTR_ERR(rst) == -EPROBE_DEFER". Fix this issue by adding
"pm_runtime_put()" into this error path.
Fixes: f65bb92ca1 ("ASoC: img-i2s-in: Add runtime PM")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200525055011.31925-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
When clk_set_parent() returns an error code, a pairing
runtime PM usage counter increment is needed to keep the
counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200525085848.4227-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
Current ALSA SoC is handling dai_link related operation,
but it is implmemented directly without using function/macro,
and at random place.
This v4 patch-set creates new snd_soc_link_xxx() functions
which handles dai_link related operation,
and implmement these at new soc-link.c.
v3 -> v4
- add Reviewed-by from Ranjani and Pierre-Louis
- fix bisection error at [2/7]
v2 -> v3
- add missing #include <sound/soc-link.h> in soc-link.c
v1 -> v2
- #include <sound/soc-link.h> is added on each c source file
instead of soc.h
- not have extra error message after snd_soc_link_xxx(),
because it already indicate it via snc_link_ret()
- snd_soc_link_compr_xxx() doesn't have rtd parameter,
because it can be created from cstream
Link: https://lore.kernel.org/r/87lflk4yk3.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/874ksa59wc.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/877dx868op.wl-kuninori.morimoto.gx@renesas.com
Kuninori Morimoto (7):
ASoC: add soc-link.c
ASoC: soc-link: move soc_rtd_xxx()
ASoC: soc-link: remove unneeded parameter from snd_soc_link_xxx()
ASoC: soc-link: add snd_soc_link_be_hw_params_fixup()
ASoC: soc-link: add snd_soc_link_compr_startup()
ASoC: soc-link: add snd_soc_link_compr_shutdown()
ASoC: soc-link: add snd_soc_link_compr_set_params()
include/sound/soc-link.h | 27 +++++++
sound/soc/Makefile | 2 +-
sound/soc/soc-compress.c | 46 ++++--------
sound/soc/soc-core.c | 18 ++---
sound/soc/soc-dai.c | 9 ++-
sound/soc/soc-link.c | 150 +++++++++++++++++++++++++++++++++++++++
sound/soc/soc-pcm.c | 86 ++++------------------
7 files changed, 219 insertions(+), 119 deletions(-)
create mode 100644 include/sound/soc-link.h
create mode 100644 sound/soc/soc-link.c
--
2.17.1
Thank you for your help !!
Best regards
---
Kuninori Morimoto
Hello,
extended firmware manifest is a method to retrieve capabilities
directly from the firmware file instead of routing the information via
the DSP and reading it back via IPC (latter mechanism still supported
but will be deprecated).
This feature was briefly merged to 5.8 with the series sent on
2020-Apr-15, but due to a regression hit with exporting uapi headers,
the patches got dropped.
Here's an update with the uapi header issue fixed, rebased to latest
'for-5.8' and a few minor fixes. This has been sitting in sof-dev for
some weeks and no further issues have been found. We also added
a check for the uapi-export case to SOF CI, so such errors would
not slip through again in the future.
Tooling support to create firmware files with an extended header
is available in SOF firmware repository (see the rimage tool) and
this part is already merged.
Karol Trzcinski (5):
ASoC: SOF: loader: Adjust validation condition for fw_offset
ASoC: SOF: Introduce extended manifest
ASoC: SOF: ext_manifest: parse firmware version
ASoC: SOF: ext_manifest: parse windows
ASoC: SOF: ext_manifest: parse compiler version
include/sound/sof/ext_manifest.h | 95 +++++++++++++++++
sound/soc/sof/intel/hda-loader.c | 2 +-
sound/soc/sof/loader.c | 176 ++++++++++++++++++++++++++++++-
3 files changed, 269 insertions(+), 4 deletions(-)
create mode 100644 include/sound/sof/ext_manifest.h
--
2.26.2
With dedicated power domain for asrc, power can be disabled after
probe and pm runtime suspend, then the value of all registers need to
be restored in pm runtime resume. So we can merge suspend/resume function
to runtime_suspend/resume function and enable regcache only in end of
probe.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1590141444-28668-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Omit unused initialized value, because 'ret' will be assigined
by the function snd_soc_component_read().
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200513111408.11452-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
sound/soc/fsl/fsl_asrc.c:557:18: warning: no previous prototype for function 'fsl_asrc_get_dma_channel' [-Wmissing-prototypes]
struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir)
^
sound/soc/fsl/fsl_asrc.c:557:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir)
^
static
Fixes: be7bd03f02 ("ASoC: fsl_asrc: Move common definition to fsl_asrc_common")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: shengjiu wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1590397412-12966-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The compiler version and description can be extracted from the
extended manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The window description can be extracted from the extended manifest
content. This information known at build time does not need to be
provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware version can be extracted from the extended
manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extended manifest is a place to store build time known firmware
metadata, for example firmware version or used compiler description.
Given information is read on host side before firmware startup.
This part of output binary is located as a first structure in binary
file.
Extended manifest should be skipped in firmware loading routine.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Condition in if statement should be same as trace message
and FW size equal to zero (after skipping offset) should
be marked as invalid.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link related function should be implemented at soc-link.c.
This patch adds snd_soc_link_compr_set_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sgfo3k6q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link related function should be implemented at soc-link.c.
This patch adds snd_soc_link_compr_shutdown().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87tv043k6u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link related function should be implemented at soc-link.c.
This patch adds snd_soc_link_compr_startup().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87v9kk3k6y.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link related function should be implemented at soc-link.c.
This patch adds snd_soc_link_be_hw_params_fixup().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87wo503k73.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"rtd" can be created from "substream".
Let's cleanup snd_soc_link_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87y2pg3k78.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link related function should be implemented at
soc-link.c.
This patch moves soc-pcm soc_rtd_xxx()
to soc-link as snd_soc_link_xxx()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87zh9w3k7k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC has many dai_link->xxx() functions.
But, it is implemented randomly at random place.
This patch creats new soc-link.c and collect dai_link related
operation into it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/871rn84ys5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Updating power management register requires toggling the shutdown
bit otherwise it causes unexpected behavior of the codec.
However, toggling the shutdown bit results in loud speaker crackling.
Setup the power management register only at startup to avoid that.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Link: https://lore.kernel.org/r/20200522142957.18364-3-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX9867 codec has a possibility of connecting digital microphones.
Add DAPM controls to be able to enable them.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Link: https://lore.kernel.org/r/20200522142957.18364-2-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
As these boards have been removed from the pxa tree, amend accordingly
the sound subsystem.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mike Rapoport <rppt@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200521185140.27276-3-robert.jarzmik@free.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Mono Playback switch to codec controls which enables codec's
capability of mixing left and right channel at the DAC output.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Link: https://lore.kernel.org/r/20200520071904.15801-5-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX9867 codec doesn't have reset pin, so the registers don't
have default values in the case of reboot without powering off.
Remove the reg_defaults struct and let the regmap read initial
state of the registers at startup instead of taking them from
reg_defaults struct.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Link: https://lore.kernel.org/r/20200520071904.15801-2-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
If we fail after pm_runtime_enable(), we fail to undo it. Same with
clk_prepare_enable(). Let's order them after all things that can fail.
Fixes: 7d98cc6482 ("ASoC: mmp-sspa: Add support for the runtime power management")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200520083516.2120802-1-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
Add binding documentation for the audio serial port interface (I2S) on
Marvell MMP SoCs.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200511210134.1224532-11-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
This makes it possible to select CONFIG_SND_MMP_SOC_SSPA directly, as
opposed to via CONFIG_SND_MMP_SOC, and for the driver to bind to a device
tree node. That makes the driver useful on Device Tree based systems,
with audio-graph-card or simple-card.
The aforementioned card drivers control the master clock themselves and
don't call the set_dai_sysclk() or set_dai_pll(), thus the respective
handlers don't serve any purpose anymore. Instead, they return early and
the hw_params() handler sets the appropriate bitclk itself.
The register range is split into two -- for the RX block and for the TX
block. On a MMP2 there are two pairs of them; the first one has the
clock controller in the middle, while the second just has a hole:
0xd42a0c00 - 0xd42a0c30 RX1
0xd42a0c30 - 0xd42a0c40 Clocks
0xd42a0c80 - 0xd42a0cb0 TX1
0xd42a0d00 - 0xd42a0d30 RX2
0xd42a0d80 - 0xd42a0cb0 TX2
For this reason, mmp_sspa_write_reg() and mmp_sspa_read_reg() are
replaced with direct calls to I/O routines.
Tested on a MMP2-based OLPC XO-1.75 laptop with rt5631 coded, mmp_tdma DMA
engine and MMP2 clock controller glued together with audio-graph-card.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200511210134.1224532-12-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
Removed api config_pdm_stream_params().
Modified switch case for channel check.
Default case should return -EINVAL.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20200519143422.18255-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Removed unused variable from code to fix the kernel warning.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20200519143422.18255-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IRQ numbers may change depending on the SoC, so do not pass the IRQ
numbers in the comments.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200518185448.6116-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to use ifdef's around the power managament
related functions, as they are already using the __maybe_unused
notation.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200518185448.6116-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The processing clock is different for platforms, so it is better
to set ASR76K and ASR56K based on processing clock, rather than
hard coding the value for them.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
Link: https://lore.kernel.org/r/1589278979-31008-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
