SoC support. Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes. Beyond that core framework change
we have the usual pile of clk driver updates such as migrating i2c drivers to
use .probe() again or YAMLfication of clk DT bindings so we can validate DTBs.
Overall the SoCs that got the most updates this time around in terms of
diffstat are the Amlogic and Mediatek drivers because they added new SoC
support or fixed up various drivers to have proper data.
In general things look kinda quiet. I suspect the core framework change may
still shake out some problems after the merge window, mostly because not
everyone tests linux-next where that series has been for some number of weeks.
I saw that there's at least one pending fix for Tegra that needs to be wrapped
up into a proper patch. I'll try to catch those bits before the window closes
so that -rc1 is bootable. More details below.
Core:
- Make clk_ops::determine_rate mandatory for muxes
New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support
Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip FPGA clock
drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc" boolean DT
property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050, i.MX8MN,
i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve some
objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L
-----BEGIN PGP SIGNATURE-----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=6M8D
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This batch of clk driver updates contains almost no new SoC support.
Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes.
Beyond that core framework change we have the usual pile of clk driver
updates such as migrating i2c drivers to use .probe() again or
YAMLfication of clk DT bindings so we can validate DTBs.
Overall the SoCs that got the most updates this time around in terms
of diffstat are the Amlogic and Mediatek drivers because they added
new SoC support or fixed up various drivers to have proper data.
In general things look kinda quiet. I suspect the core framework
change may still shake out some problems after the merge window,
mostly because not everyone tests linux-next where that series has
been for some number of weeks. I saw that there's at least one pending
fix for Tegra that needs to be wrapped up into a proper patch. I'll
try to catch those bits before the window closes so that -rc1 is
bootable. More details below.
Core:
- Make clk_ops::determine_rate mandatory for muxes
New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support
Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip
FPGA clock drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc"
boolean DT property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use
after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050,
i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve
some objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits)
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
...
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
* clk-platform:
clk: mediatek: Convert all remaining drivers to platform_driver's .remove_new()
clk: mediatek: Make mtk_clk_pdev_remove() return void
clk: mediatek: Make mtk_clk_simple_remove() return void
* clk-i2c:
clk: si521xx: Switch i2c driver back to use .probe()
clk: Switch i2c drivers back to use .probe()
* clk-mediatek:
clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
clk: mediatek: fix of_iomap memory leak
clk: mediatek: reset: add infra_ao reset support for MT8188
dt-bindings: reset: mt8188: add thermal reset control bit
clk: mediatek: Remove CLK_SET_PARENT from all MSDC core clocks
clk: mediatek: mux: Stop forcing CLK_SET_RATE_PARENT flag
clk: mediatek: Enable all MT8192 clocks by default
* clk-i2cid:
clk: rs9: Fix .driver_data content in i2c_device_id
clk: vc7: Fix .driver_data content in i2c_device_id
clk: vc5: Fix .driver_data content in i2c_device_id
* clk-vc5:
clk: vc7: Use device_get_match_data() instead of of_device_get_match_data()
clk: vc5: Use device_get_match_data() instead of of_device_get_match_data()
In case of error after of_ioremap() the resource must be released:
call iounmap() where appropriate to fix that.
Fixes: 41138fbf87 ("clk: mediatek: mt8173: Migrate to platform driver and common probe")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230615122051.546985-4-angelogioacchino.delregno@collabora.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The of_iomap() function returns NULL in case of error so usage of
PTR_ERR() is wrong!
Change that to return -ENOMEM in case of failure.
Fixes: 41138fbf87 ("clk: mediatek: mt8173: Migrate to platform driver and common probe")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230615122051.546985-3-angelogioacchino.delregno@collabora.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In the rare case in which one of the clock drivers has divider clocks
but not composite clocks, mtk_clk_simple_probe() would not io(re)map,
hence passing a NULL pointer to mtk_clk_register_dividers().
To fix this issue, extend the `if` conditional to also check if any
divider clocks are present. While at it, also make sure the iomem
pointer is NULL if no composite/divider clocks are declared, as we
are checking for that when iounmapping it in the error path.
This hasn't been seen on any MediaTek clock driver as the current ones
always declare composite clocks along with divider clocks, but this is
still an important fix for a future potential KP.
Fixes: 1fe074b1f1 ("clk: mediatek: Add divider clocks to mtk_clk_simple_{probe,remove}()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230615122051.546985-2-angelogioacchino.delregno@collabora.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Smatch reports:
drivers/clk/mediatek/clk-mtk.c:583 mtk_clk_simple_probe() warn:
'base' from of_iomap() not released on lines: 496.
This problem was also found in linux-next. In mtk_clk_simple_probe(),
base is not released when handling errors
if clk_data is not existed, which may cause a leak.
So free_base should be added here to release base.
Fixes: c58cd0e40f ("clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers")
Signed-off-by: Bosi Zhang <u201911157@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230422084331.47198-1-u201911157@hust.edu.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The infra_ao reset is needed for MT8188.
- Add mtk_clk_rst_desc for MT8188.
- Add register reset controller function for MT8188 infra_ao.
- Add infra_ao_idx_map for MT8188.
Signed-off-by: Runyang Chen <runyang.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230525075011.7032-3-runyang.chen@mediatek.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Various MSDC core clocks, used for multiple MSDC controller instances,
share the same parent(s): in order to add parents selection in the
mtk-sd driver to achieve an accurate clock rate for all modes, remove
the CLK_SET_RATE_PARENT flag from all MSDC clocks for all SoCs: this
will make sure that a clk_set_rate() call performed for a clock on
a secondary controller will not change the rate of a common parent,
which would result in an overclock or underclock of one of the
controllers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20230516135205.372951-3-angelogioacchino.delregno@collabora.com
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk-mux driver was forcing the CLK_SET_RATE_PARENT flag even for
the GATE_CLK_SET_UPD_FLAGS() macro, as in mtk_clk_register_mux() the
flag was unconditionally added.
In preparation for a change on MSDC clock muxes, stop forcing this
flag and, where necessary, update clock drivers to add it so that
with this commit we introduce no functional changes for the currently
supported SoCs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20230516135205.372951-2-angelogioacchino.delregno@collabora.com
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The given operations are inverted for the wrong registers which makes
multiple of the mt8365 hardware units unusable. In my setup at least usb
did not work.
Fixed by swapping the operations with the inverted ones.
Reported-by: Alexandre Mergnat <amergnat@baylibre.com>
Fixes: 905b7430d3 ("clk: mediatek: mt8365: Convert simple_gate to mtk_gate clocks")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20230511133226.913600-1-msp@baylibre.com
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Before the patch [1], the clock probe was done directly in the
clk-mt8365 driver. In this probe function, the array which stores the
data clocks is sized using the higher defined numbers (*_NR_CLOCK) in
the clock lists [2]. Currently, with the patch [1], the specific
clk-mt8365 probe function is replaced by the mtk generic one [3], which
size the clock data array by adding all the clock descriptor array size
provided by the clk-mt8365 driver.
Actually, all clock indexes come from the header file [2], that mean, if
there are more clock (then more index) in the header file [2] than the
number of clock declared in the clock descriptor arrays (which is the
case currently), the clock data array will be undersized and then the
generic probe function will overflow when it will try to write in
"clk_data[CLK_INDEX]". Actually, instead of crashing at boot, the probe
function returns an error in the log which looks like:
"of_clk_hw_onecell_get: invalid index 135", then this clock isn't
enabled.
Solve this issue by adding in the driver the missing clocks declared in
the header clock file [2].
[1]: Commit ffe91cb28f ("clk: mediatek: mt8365: Convert to
mtk_clk_simple_{probe,remove}()")
[2]: include/dt-bindings/clock/mediatek,mt8365-clk.h
[3]: drivers/clk/mediatek/clk-mtk.c
Fixes: ffe91cb28f ("clk: mediatek: mt8365: Convert to mtk_clk_simple_{probe,remove}()")
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230517-fix-clk-index-v3-1-be4df46065c4@baylibre.com
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Mediatek cpumux clock implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.
This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidates to
trigger that parent change are either the assigned-clock-parents device
tree property or a call to clk_set_rate(), with determine_rate()
figuring out which parent is the best suited for a given rate.
The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.
Similarly, it doesn't look like the device tree using that clock driver
uses any of the assigned-clock properties on that clock.
So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().
The latter case would be equivalent to setting the determine_rate
implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no
determine_rate implementation is provided, clk_round_rate() (through
clk_core_round_rate_nolock()) will call itself on the parent if
CLK_SET_RATE_PARENT is set, and will not change the clock rate
otherwise.
And if it was an oversight, then we are at least explicit about our
behavior now and it can be further refined down the line.
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-29-971d5077e7d2@cerno.tech
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Currently the base MT8192 clock drivers are enabled by default, but all
the other clock drivers need to be enabled by hand. This is extremely
confusing and inconvenient for end users. For the MT8192 platform to be
useful, most if not all the clock drivers driving the hardware blocks
need to be enabled.
Enable them by default whenever MT8192 base clock driver is enabled.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230421111125.2397368-1-wenst@chromium.org
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert all mediatek clk drivers from always returning zero in
the remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230430190233.878921-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This function returns 0 unconditionally. Make it return no value instead
and convert the drivers making use of it to platform_driver's
.remove_new().
This makes the semantics in the callers of mtk_clk_simple_remove() clearer
and prepares for the quest to make platform driver's remove function return
void. There is no semantic change.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230430190233.878921-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
__mtk_clk_simple_remove() and so also mtk_clk_simple_remove() return
zero unconditionally. Make them return no value instead and convert the
drivers making use of it to platform_driver's .remove_new().
This makes the semantics in the callers of mtk_clk_simple_remove() clearer
and prepares for the quest to make platform driver's remove function return
void. There is no semantic change.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230430190233.878921-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
smatch reports
drivers/clk/mediatek/clk-fhctl.c:17:27: warning: symbol
'fhctl_offset_v1' was not declared. Should it be static?
drivers/clk/mediatek/clk-fhctl.c:30:27: warning: symbol
'fhctl_offset_v2' was not declared. Should it be static?
These variables are only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230406010935.1944976-1-trix@redhat.com
Fixes: 8da312d657 ("clk: mediatek: fhctl: Add support for older fhctl register layout")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 adsp clock controller which provides clock gate
control for Audio DSP.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-20-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 imp i2c wrapper clock controllers which provide clock gate
control in I2C IP blocks.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-19-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 wpesys clock controllers which provide clock gate
control in Wrapping Engine.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-18-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 vencsys clock controllers which provide clock gate
control for video encoder.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-15-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 vdosys1 clock controller which provides clock gate
control in video system. This is integrated with mtk-mmsys
driver which will populate device by platform_device_register_data
to start vdosys clock driver.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-14-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 vdosys0 clock controller which provides clock gate
control in video system. This is integrated with mtk-mmsys
driver which will populate device by platform_device_register_data
to start vdosys clock driver.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-13-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 vdec clock controllers which provide clock gate
control for video decoder.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-12-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 mfg clock controller which provides clock gate
control for GPU.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-11-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 ipesys clock controller which provides clock gate
control for Image Process Engine.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-10-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 imgsys clock controllers which provide clock gate
control for image IP blocks.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-9-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 ccusys clock controller which provides clock gate
control in Camera Computing Unit.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-8-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 camsys clock controllers which provide clock gate
control for camera IP blocks.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-7-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 infrastructure clock controller which provides
clock gate control for basic IP like pwm, uart, spi and so on.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-6-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 peripheral clock controller which provides clock
gate control for ethernet/flashif/pcie/ssusb.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-5-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8188 topckgen clock controller which provides muxes, dividers
to handle variety clock selection in other IP blocks.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230331123621.16167-4-Garmin.Chang@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Just like in commit eddc630948 ("clk: mediatek: Ensure fhctl code is
available for COMMON_CLK_MT6795"), these three need the shared driver
code, otherwise they run into link errors such as:
aarch64-linux/bin/aarch64-linux-ld: drivers/clk/mediatek/clk-mt8192-apmixedsys.o: in function `clk_mt8192_apmixed_probe':
clk-mt8192-apmixedsys.c:(.text+0x134): undefined reference to `fhctl_parse_dt'
Fixes: 45a5cbe05d ("clk: mediatek: mt8173: Add support for frequency hopping through FHCTL")
Fixes: 4d586e10c4 ("clk: mediatek: mt8192: Add support for frequency hopping through FHCTL")
Fixes: da4a82dc67 ("clk: mediatek: mt8195: Add support for frequency hopping through FHCTL")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230320091353.1918439-1-arnd@kernel.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Without this select we get linker errors when linking
clk-mt6795-apmixedsys
arm-linux-gnueabi-ld: drivers/clk/mediatek/clk-mt6795-apmixedsys.o: in function `clk_mt6795_apmixed_remove':
clk-mt6795-apmixedsys.c:(.text+0x34): undefined reference to `mtk_clk_unregister_pllfhs'
arm-linux-gnueabi-ld: drivers/clk/mediatek/clk-mt6795-apmixedsys.o: in function `clk_mt6795_apmixed_probe':
clk-mt6795-apmixedsys.c:(.text+0x98): undefined reference to `fhctl_parse_dt'
arm-linux-gnueabi-ld: clk-mt6795-apmixedsys.c:(.text+0xb8): undefined reference to `mtk_clk_register_pllfhs'
arm-linux-gnueabi-ld: clk-mt6795-apmixedsys.c:(.text+0x1c4): undefined reference to `mtk_clk_unregister_pllfhs'
Fixes: f222a1baec ("clk: mediatek: mt6795: Add support for frequency hopping through FHCTL")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230316231118.2579242-1-sboyd@kernel.org
The device_node pointer returned by of_find_compatible_node() with
refcount incremented, when finish using it, the refcount need be
decreased.
Fixes: d7964de8a8 ("clk: mediatek: Add new clock driver to handle FHCTL hardware")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221229092946.4162345-1-yangyingliang@huawei.com
[sboyd@kernel.org: Also unmap on error]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the MT8135 clock drivers to platform_driver using the common
simple probe mechanism; special note goes to the introduction of
dummy clocks with ID 0 (where 0 is the first entry of a clock array)
for each clock controller: this was necessary because of a mistake
in the bindings for all MT8135 clock controllers, where the first
clock has ID 1 (hence, array would start from element 1) instead of
zero.
Now that all of the MT8135 clock drivers (including apmixedsys) can
be compiled as modules, change the COMMON_CLK_MT8135 configuration
option to tristate to enable module build.
While at it, also remove the __initconst annotation from all of the
clock arrays as they are not only used during init anymore, but also
during runtime.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-55-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In preparation for converting this driver to the common simple probe
mechanism, join the root_clk_alias and top_divs mtk_fixed_factor
arrays.
This commit brings no functional change.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-54-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert apmixedsys clocks to be a platform driver; while at it, also
add necessary error handling to the probe function, add a remove
callback and provide a MODULE_DESCRIPTION().
This driver is now compatible with an eventual module build.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-53-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Instead of calling clk_prepare_enable() for clocks that shall stay
enabled, use the CLK_IS_CRITICAL flag, which purpose is exactly that.
Fixes: a8aede7948 ("clk: mediatek: Add basic clocks for Mediatek MT8135.")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-52-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In preparation for migrating mt8135 clocks to the common simple
probe mechanism, move the apmixedsys clocks to a different file.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-51-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a MODULE_DEVICE_TABLE() on all clocks that can be built as modules
to allow auto-load at boot.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183, MT8192, MT8195 Chromebooks
Link: https://lore.kernel.org/r/20230306140543.1813621-50-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Bootloaders must in a way setup the SoC to boot Linux: this means
that it will be possible to decompress a ramdisk and eventually
insert the core clock driver module from there.
Allow module build for all MT8192 clocks by switching to tristate.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-49-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This is the last man standing in clk-mt8192.c that won't allow us to
use the module_platform_driver() macro, and for *no* good reason.
Move it to clk-mt8192-apmixedsys.c and while at it, also add a
.remove() callback for it.
Also, since the need for "clk-mt8192-simple" and "clk-mt8192" was
just due to them being in the same file and probing different clocks,
and since now there's just one platform_driver struct per file, it
seemed natural to rename the `-simple` variant to just "clk-mt8192".
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-48-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When building clock drivers for MT8186, some may want to build in only
some of them to, for example, get CPUFreq up faster, and some may want
to leave out some clock drivers entirely as a machine may not need the
Warp Engine or the camera ISP (hence, their clock drivers).
Split the various clock drivers in their own configuration options,
keeping MT8186 configuration options consistent with other MediaTek
SoCs.
While at it, also allow building the remaining clock drivers as modules
by switching COMMON_CLK_MT8186 to tristate.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-47-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
