Report the legacy fallback behavior for uuid attributes just once
instead of logging repeated warnings for the same condition every time
the attribute is read. The old behavior is too spamy on the kernel logs.
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
lkp reports below sparse warning when building for RV32:
arch/riscv/mm/init.c:1204:48: sparse: warning: cast truncates bits from
constant value (100000000 becomes 0)
IMO, the reason we didn't see this truncates bug in real world is "0"
means MEMBLOCK_ALLOC_ACCESSIBLE in memblock and there's no RV32 HW
with more than 4GB memory.
Fix it anyway to make sparse happy.
Fixes: decf89f86e ("riscv: try to allocate crashkern region from 32bit addressible memory")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306080034.SLiCiOMn-lkp@intel.com/
Link: https://lore.kernel.org/r/20230709171036.1906-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since commit 096b52fd2b ("perf: RISC-V: throttle perf events") the
perf_sample_event_took() function was added to report time spent in
overflow interrupts. If the interrupt takes too long, the perf framework
will lower the sysctl_perf_event_sample_rate and max_samples_per_tick.
When hwc->interrupts is larger than max_samples_per_tick, the
hwc->interrupts will be set to MAX_INTERRUPTS, and events will be
throttled within the __perf_event_account_interrupt() function.
However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the
PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler()
function to avoid throttling. When the perf framework unthrottled the event
in the timer interrupt handler, it triggers riscv_pmu_start() function
and causes a WARN_ON_ONCE() warning, as shown below:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e
Modules linked in:
CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1
Hardware name: SiFive (DT)
epc : riscv_pmu_start+0x7c/0x8e
ra : riscv_pmu_start+0x28/0x8e
epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0
gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0
t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720
s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000
a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000
a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030
s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00
s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000
s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340
s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796
t5 : 0000000700000000 t6 : ffffaf8005269870
status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[<ffffffff80aef864>] riscv_pmu_start+0x7c/0x8e
[<ffffffff80185b56>] perf_adjust_freq_unthr_context+0x15e/0x174
[<ffffffff80188642>] perf_event_task_tick+0x88/0x9c
[<ffffffff800626a8>] scheduler_tick+0xfe/0x27c
[<ffffffff800b5640>] update_process_times+0x9a/0xba
[<ffffffff800c5bd4>] tick_sched_handle+0x32/0x66
[<ffffffff800c5e0c>] tick_sched_timer+0x64/0xb0
[<ffffffff800b5e50>] __hrtimer_run_queues+0x156/0x2f4
[<ffffffff800b6bdc>] hrtimer_interrupt+0xe2/0x1fe
[<ffffffff80acc9e8>] riscv_timer_interrupt+0x38/0x42
[<ffffffff80090a16>] handle_percpu_devid_irq+0x90/0x1d2
[<ffffffff8008a9f4>] generic_handle_domain_irq+0x28/0x36
After referring other PMU drivers like Arm, Loongarch, Csky, and Mips,
they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag
after perf_event_overflow() function nor do they add PERF_HES_STOPPED
flag checking in *_pmu_start() which don't cause this warning.
Thus, it's recommended to remove this unnecessary check in
riscv_pmu_start() function to prevent this warning.
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Link: https://lore.kernel.org/r/20230710154328.19574-1-eric.lin@sifive.com
Fixes: 096b52fd2b ("perf: RISC-V: throttle perf events")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Avoids quite a bit of logic and kmalloc overhead.
v2: fix multiple problems pointed out by Felix
v3: two more nit picks from Felix fixed
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-4-christian.koenig@amd.com
This adds the infrastructure for an execution context for GEM buffers
which is similar to the existing TTMs execbuf util and intended to replace
it in the long term.
The basic functionality is that we abstracts the necessary loop to lock
many different GEM buffers with automated deadlock and duplicate handling.
v2: drop xarray and use dynamic resized array instead, the locking
overhead is unnecessary and measurable.
v3: drop duplicate tracking, radeon is really the only one needing that.
v4: fixes issues pointed out by Danilo, some typos in comments and a
helper for lock arrays of GEM objects.
v5: some suggestions by Boris Brezillon, especially just use one retry
macro, drop loop in prepare_array, use flags instead of bool
v6: minor changes suggested by Thomas, Boris and Danilo
v7: minor typos pointed out by checkpatch.pl fixed
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Tested-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-2-christian.koenig@amd.com
The openwrt.org email address is long defunct, but still pop ups from
time to time when asking get_maintainer.pl. So add an entry to my
currently used address.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20230708195309.72767-2-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I noticed the driver is unclaimed. Since I was the last one doing
substantial work on it, add me as the maintainer.
As it is only found in legacy products, mark it as "Odd Fixes"
instead of "Maintained".
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230708195309.72767-1-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SPI loopback transfer is performed, S3C64XX_SPI_MODE_SELF_LOOPBACK
bit still remained. It works as loopback even if the next transfer is
not spi loopback mode.
If not SPI_LOOP, needs to clear S3C64XX_SPI_MODE_SELF_LOOPBACK bit.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Fixes: ffb7bcd3b2 ("spi: s3c64xx: support loopback mode")
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20230711082020.138165-1-jaewon02.kim@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When allocating the 2D array for handling IRQ type registers in
regmap_add_irq_chip_fwnode(), the intent is to allocate a matrix
with num_config_bases rows and num_config_regs columns.
This is currently handled by allocating a buffer to hold a pointer for
each row (i.e. num_config_bases). After that, the logic attempts to
allocate the memory required to hold the register configuration for
each row. However, instead of doing this allocation for each row
(i.e. num_config_bases allocations), the logic erroneously does this
allocation num_config_regs number of times.
This scenario can lead to out-of-bounds accesses when num_config_regs
is greater than num_config_bases. Fix this by updating the terminating
condition of the loop that allocates the memory for holding the register
configuration to allocate memory only for each row in the matrix.
Amit Pundir reported a crash that was occurring on his db845c device
due to memory corruption (see "Closes" tag for Amit's report). The KASAN
report below helped narrow it down to this issue:
[ 14.033877][ T1] ==================================================================
[ 14.042507][ T1] BUG: KASAN: invalid-access in regmap_add_irq_chip_fwnode+0x594/0x1364
[ 14.050796][ T1] Write of size 8 at addr 06ffff8081021850 by task init/1
[ 14.242004][ T1] The buggy address belongs to the object at ffffff8081021850
[ 14.242004][ T1] which belongs to the cache kmalloc-8 of size 8
[ 14.255669][ T1] The buggy address is located 0 bytes inside of
[ 14.255669][ T1] 8-byte region [ffffff8081021850, ffffff8081021858)
Fixes: faa87ce919 ("regmap-irq: Introduce config registers for irq types")
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/all/CAMi1Hd04mu6JojT3y6wyN2YeVkPR5R3qnkKJ8iR8if_YByCn4w@mail.gmail.com/
Tested-by: John Stultz <jstultz@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org> # tested on Dragonboard 845c
Cc: stable@vger.kernel.org # v6.0+
Cc: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: "Isaac J. Manjarres" <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20230711193059.2480971-1-isaacmanjarres@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These callbacks can be called again by the cpufreq core after the driver
is initialized and must be kept around. We currently get section
mismatch build warnings.
Don't mark them with __init.
Fixes: dcfce7c2ce ("cpufreq: sparc: Don't allocate cpufreq_driver dynamically")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The kernel does not currently validate that both the minimum and maximum
ports of a port range are specified. This can lead user space to think
that a filter matching on a port range was successfully added, when in
fact it was not. For example, with a patched (buggy) iproute2 that only
sends the minimum port, the following commands do not return an error:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
# tc filter show dev swp1 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
filter protocol ip pref 1 flower chain 0 handle 0x2
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 2 ref 1 bind 1
Fix by returning an error unless both ports are specified:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
Error: Both min and max source ports must be specified.
We have an error talking to the kernel
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
Error: Both min and max destination ports must be specified.
We have an error talking to the kernel
Fixes: 5c72299fba ("net: sched: cls_flower: Classify packets using port ranges")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
igc: Fix corner cases for TSN offload
Florian Kauer says:
The igc driver supports several different offloading capabilities
relevant in the TSN context. Recent patches in this area introduced
regressions for certain corner cases that are fixed in this series.
Each of the patches (except the first one) addresses a different
regression that can be separately reproduced. Still, they have
overlapping code changes so they should not be separately applied.
Especially #4 and #6 address the same observation,
but both need to be applied to avoid TX hang occurrences in
the scenario described in the patches.
====================
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
linux-arm-msm is the list most people subscribe to in order to receive
updates about Qualcomm related drivers. Make sure changes for the
Qualcomm ethernet driver make it there.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230710195240.197047-1-ahalaney@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is equivalent to 'gen2', and it was always confusing to have
two identical config entries. The split config patch actually had
been originally developed after removing 'use_tfh" and didn't add
the use_tfh in the new configs as they'd later been copied to the
new files. Thus the easiest way to fix the init crash here now is
to just remove use_tfh (which is erroneously unset in most of the
configs now) and use 'gen2' in the code instead.
There's possibly still an unwind error in iwl_txq_gen2_init() as
it crashes if TXQ 0 fails to initialize, but we can deal with it
later since the original failure is due to the use_tfh confusion.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217622
Link: https://lore.kernel.org/all/9274d9bd3d080a457649ff5addcc1726f08ef5b2.camel@xry111.site/
Link: https://lore.kernel.org/all/CAAJw_Zug6VCS5ZqTWaFSr9sd85k%3DtyPm9DEE%2BmV%3DAKoECZM%2BsQ@mail.gmail.com/
Fixes: 19898ce9cf ("wifi: iwlwifi: split 22000.c into multiple files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230710145038.84186-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, verifier does not reject XDP programs that pass NULL pointer to
hints functions. At the same time, this case is not handled in any driver
implementation (including veth). For example, changing
bpf_xdp_metadata_rx_timestamp(ctx, ×tamp);
to
bpf_xdp_metadata_rx_timestamp(ctx, NULL);
in xdp_metadata test successfully crashes the system.
Add KF_TRUSTED_ARGS flag to hints kfunc definitions, so driver code
does not have to worry about getting invalid pointers.
Fixes: 3d76a4d3d4 ("bpf: XDP metadata RX kfuncs")
Reported-by: Stanislav Fomichev <sdf@google.com>
Closes: https://lore.kernel.org/bpf/ZKWo0BbpLfkZHbyE@google.com/
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230711105930.29170-1-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Quieten a gcc (11.3.0) build error or warning by checking the function
call status and returning -EBUSY if the function call failed.
This is similar to what several other wireless drivers do for the
SIOCGIWRATE ioctl call when there is a locking problem.
drivers/net/wireless/cisco/airo.c: error: 'status_rid.currentXmitRate' is used uninitialized [-Werror=uninitialized]
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/39abf2c7-24a-f167-91da-ed4c5435d1c4@linux-m68k.org
Link: https://lore.kernel.org/r/20230709133154.26206-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sections .text..refcount were previously used to hold an error path code
for fast refcount overflow protection on x86, see commit 7a46ec0e2f
("locking/refcounts, x86/asm: Implement fast refcount overflow
protection") and commit 564c9cc84e ("locking/refcounts, x86/asm: Use
unique .text section for refcount exceptions").
The code was replaced and removed in commit fb041bb7c0
("locking/refcount: Consolidate implementations of refcount_t") and no
sections .text..refcount are present since then.
Remove then a relic referencing these sections from TEXT_TEXT to avoid
confusing people, like me. This is a non-functional change.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20230711125054.9000-1-petr.pavlu@suse.com
Signed-off-by: Kees Cook <keescook@chromium.org>
resume_store() first calls lookup_bdev() and after tries to handle
maj:min, but it does not reset the error before, hence if you will write
maj:min you will get ENOENT:
# echo 259:2 >| /sys/power/resume
bash: echo: write error: No such file or directory
This also should fix hiberation via systemd, since it uses this way.
Fixes: 1e8c813b08 ("PM: hibernate: don't use early_lookup_bdev in resume_store")
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
I'm not sure what I was trying to do with the ':'s, but they're just
rendered to HTML which looks odd. This makes "fence.i" look like
"mvendorid" and such, which is seems reasonable to me.
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230710193329.2742-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
DAX can be used to share page cache between VMs, reducing guest memory
overhead. And chunk based data format is widely used for VM and
container image. So enable dax support for it, make erofs better used
for VM scenarios.
Fixes: c5aa903a59 ("erofs: support reading chunk-based uncompressed files")
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230711062130.7860-1-yinxin.x@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
z_erofs_do_read_page() may loop infinitely due to the inappropriate
truncation in the below statement. Since the offset is 64 bits and min_t()
truncates the result to 32 bits. The solution is to replace unsigned int
with a 64-bit type, such as erofs_off_t.
cur = end - min_t(unsigned int, offset + end - map->m_la, end);
- For example:
- offset = 0x400160000
- end = 0x370
- map->m_la = 0x160370
- offset + end - map->m_la = 0x400000000
- offset + end - map->m_la = 0x00000000 (truncated as unsigned int)
- Expected result:
- cur = 0
- Actual result:
- cur = 0x370
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Fixes: 3883a79abd ("staging: erofs: introduce VLE decompression support")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230710093410.44071-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
z_erofs_pcluster_readmore() may take a long time to loop when the page
offset is large enough, which is unnecessary should be prevented.
For example, when the following case is encountered, it will loop 4691368
times, taking about 27 seconds:
- offset = 19217289215
- inode_size = 1442672
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Fixes: 386292919c ("erofs: introduce readmore decompression strategy")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230710042531.28761-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Use memcpy_to_page() instead of open-coding them.
In addition, add a missing flush_dcache_page() even though almost all
modern architectures clear `PG_dcache_clean` flag for new file cache
pages so that it doesn't change anything in practice.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230627161240.331-2-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
In response to a disk I/O request, Hyper-V has been observed to return SRB
status value 0x30. This indicates the request was not processed by Hyper-V
because low memory conditions on the host caused an internal error. The
0x30 status is not recognized by storvsc, so the I/O operation is not
flagged as an error. The request is treated as if it completed normally but
with zero data transferred, causing a flood of retries.
Add a definition for this SRB status value and handle it like other error
statuses from the Hyper-V host.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1688788886-94279-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Generate a hotplug event after registering a client to allow the
client to configure its display. Remove the hotplug calls from the
existing clients for fbdev emulation. This change fixes a concurrency
bug between registering a client and receiving events from the DRM
core. The bug is present in the fbdev emulation of all drivers.
The fbdev emulation currently generates a hotplug event before
registering the client to the device. For each new output, the DRM
core sends an additional hotplug event to each registered client.
If the DRM core detects first output between sending the artificial
hotplug and registering the device, the output's hotplug event gets
lost. If this is the first output, the fbdev console display remains
dark. This has been observed with amdgpu and fbdev-generic.
Fix this by adding hotplug generation directly to the client's
register helper drm_client_register(). Registering the client and
receiving events are serialized by struct drm_device.clientlist_mutex.
So an output is either configured by the initial hotplug event, or
the client has already been registered.
The bug was originally added in commit 6e3f17ee73 ("drm/fb-helper:
generic: Call drm_client_add() after setup is done"), in which adding
a client and receiving a hotplug event switched order. It was hidden,
as most hardware and drivers have at least on static output configured.
Other drivers didn't use the internal DRM client or still had struct
drm_mode_config_funcs.output_poll_changed set. That callback handled
hotplug events as well. After not setting the callback in amdgpu in
commit 0e3172bac3 ("drm/amdgpu: Don't set struct
drm_driver.output_poll_changed"), amdgpu did not show a framebuffer
console if output events got lost. The bug got copy-pasted from
fbdev-generic into the other fbdev emulation.
Reported-by: Moritz Duge <MoritzDuge@kolahilft.de>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649
Fixes: 6e3f17ee73 ("drm/fb-helper: generic: Call drm_client_add() after setup is done")
Fixes: 8ab59da26b ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Fixes: b79fe9abd5 ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Fixes: 63c381552f ("drm/armada: Implement fbdev emulation as in-kernel client")
Fixes: 49953b70e7 ("drm/exynos: Implement fbdev emulation as in-kernel client")
Fixes: 8f1aaccb04 ("drm/gma500: Implement client-based fbdev emulation")
Fixes: 940b869c2f ("drm/msm: Implement fbdev emulation as in-kernel client")
Fixes: 9e69bcd88e ("drm/omapdrm: Implement fbdev emulation as in-kernel client")
Fixes: e317a69fe8 ("drm/radeon: Implement client-based fbdev emulation")
Fixes: 71ec16f45e ("drm/tegra: Implement fbdev emulation as in-kernel client")
Fixes: 0e3172bac3 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Moritz Duge <MoritzDuge@kolahilft.de>
Tested-by: Torsten Krah <krah.tm@gmail.com>
Tested-by: Paul Schyska <pschyska@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
Include <linux/screen_info.h> to get the global screen_info state.
Fixes the following errors:
>> drivers/video/fbdev/hyperv_fb.c:1033:10: error: use of undeclared identifier 'screen_info'
1033 | base = screen_info.lfb_base;
| ^
drivers/video/fbdev/hyperv_fb.c:1034:10: error: use of undeclared identifier 'screen_info'
1034 | size = screen_info.lfb_size;
| ^
>> drivers/video/fbdev/hyperv_fb.c:1080:3: error: must use 'struct' tag to refer to type 'screen_info'
1080 | screen_info.lfb_size = 0;
| ^
| struct
>> drivers/video/fbdev/hyperv_fb.c:1080:14: error: expected identifier or '('
1080 | screen_info.lfb_size = 0;
| ^
drivers/video/fbdev/hyperv_fb.c:1081:3: error: must use 'struct' tag to refer to type 'screen_info'
1081 | screen_info.lfb_base = 0;
| ^
| struct
drivers/video/fbdev/hyperv_fb.c:1081:14: error: expected identifier or '('
1081 | screen_info.lfb_base = 0;
| ^
drivers/video/fbdev/hyperv_fb.c:1082:3: error: must use 'struct' tag to refer to type 'screen_info'
1082 | screen_info.orig_video_isVGA = 0;
| ^
| struct
drivers/video/fbdev/hyperv_fb.c:1082:14: error: expected identifier or '('
1082 | screen_info.orig_video_isVGA = 0;
| ^
8 errors generated.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307101042.rqehuauj-lkp@intel.com/
Fixes: 8b0d13545b ("efi: Do not include <linux/screen_info.h> from EFI header")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Haiyang Zhang <haiyangz@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Wei Liu <wei.liu@kernel.org> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Dexuan Cui <decui@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Helge Deller <deller@gmx.de> (maintainer:FRAMEBUFFER LAYER)
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-hyperv@vger.kernel.org (open list:Hyper-V/Azure CORE AND DRIVERS)
Cc: linux-fbdev@vger.kernel.org (open list:FRAMEBUFFER LAYER)
Cc: dri-devel@lists.freedesktop.org (open list:FRAMEBUFFER LAYER)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710075848.23087-1-tzimmermann@suse.de
Due to hardware limitation, MCAM drop rule with
ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting
such rules.
Fixes: dce677da57 ("octeontx2-pf: Add vlan-etype to ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20230710103027.2244139-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add missing empty line necessary for sphinx to recognize
the list. Also reword the first entry a little bit.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230707010333.12954-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If for some reason a external function returns -ENODEV,
no error message is being displayed because the driver
assumes that -ENODEV can only be returned internally if
no sensors, etc where found.
Fix this by explicitly returning 0 in such a case since
missing hardware is no error. Also remove the now obsolete
check for -ENODEV.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230707010333.12954-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
HP 15s-eq2xxx is an older Lucienne laptop that has a problem resuming
from s2idle when IOMMU is enabled. The symptoms very closely resemble
that of the Lenovo issues with NVME resume. Lucienne was released in
a similar timeframe as the Renoir / Cezanne Lenovo laptops and they
may have similar BIOS code.
Applying the same quirk to this system allows the system to work with
IOMMU enabled and s2idle resume to work.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2684
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230710183934.17315-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It turns out that some-non Lenovo systems can benefit from the quirk
introduced for Lenovo systems in commit 455cd867b8 ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops").
So move this quirk into running from the amd-pmc driver instead.
No intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230710183934.17315-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove unnecessary of_node_put from the continue path to prevent
child node from being released twice, which could avoid resource
leak or other unexpected issues.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: de879a016a ("net: dsa: felix: add functionality when not all ports are supported")
Link: https://lore.kernel.org/r/20230710031859.36784-1-luhongfei@vivo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit a4d86249c7 ("drm/i915/gt: Provide a utility to create a scratch
buffer") mistakenly passed in uapi I915_CACHING_CACHED as argument to
i915_gem_object_set_cache_coherency(), which actually takes internal
enum i915_cache_level.
No functional issue since the value matches I915_CACHE_LLC (1 == 1), which
is the intended caching mode, but lets clean it up nevertheless.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a4d86249c7 ("drm/i915/gt: Provide a utility to create a scratch buffer")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707125503.3965817-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 49c60b2f08)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Commit 9275277d53 ("drm/i915: use pat_index instead of cache_level")
added a dedicated gen12_pte_encode but forgot to remove the Gen12 specific
bit from gen8_pte_encode.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 9275277d53 ("drm/i915: use pat_index instead of cache_level")
Cc: Fei Yang <fei.yang@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707124644.3965281-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 08509377dd)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
For reports that are not powers of 2, reports at the end of the OA
buffer may get split across the buffer boundary. When zeroing out such
reports, take the split into consideration.
v2: Use OA_BUFFER_SIZE (Ashutosh)
Fixes: 09a36015d9 ("drm/i915/perf: Clear out entire reports after reading if not power of 2 size")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616173402.699776-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 40b1588a75)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
If we are using Bigjoiner dpll_hw_state is supposed to be exactly
same as for master crtc, so no need to save it's state for slave crtc.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 0ff0e219d9 ("drm/i915: Compute clocks earlier")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628141017.18937-1-stanislav.lisovskiy@intel.com
(cherry picked from commit cbaf758809)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
