Commit Graph

1205 Commits

Author SHA1 Message Date
Steven Whitehouse
fdb76a4228 GFS2: Drop "pull" argument from log_write_header()
The "pull" argument to log_write_header() is only used
for debug purposes and it is not really needed any more. There
are other tests for this particular problem, so I think we can
dispose of it in order to simplify the code.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-24 16:44:24 +01:00
Bob Peterson
4c569a72c3 GFS2: Instruct DLM to avoid queue convert slowdown
This patch instructs DLM to prevent an "in place" conversion, where the
lock just stays on the granted queue, and instead forces the conversion to
the back of the convert queue. This is done on upward conversions only.
    
This is useful in cases where, for example, a lock is frequently needed in
PR on one node, but another node needs it temporarily in EX to update it.
This may happen, for example, when the rindex is being updated by gfs2_grow.
The gfs2_grow needs to have the lock in EX, but the other nodes need to
re-read it to retrieve the updates. The glock is already granted in PR on
the non-growing nodes, so this prevents them from continually re-granting
the lock in PR, and forces the EX from gfs2_grow to go through.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-24 13:26:50 +01:00
Linus Torvalds
1b6150fe82 Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes
Pull GFS2 fixes from Steven Whitehouse

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Allow caching of rindex glock
  GFS2: Make sure rindex is uptodate before starting transactions
  GFS2: use depends instead of select in kconfig
  GFS2: put glock reference in error patch of read_rindex_entry
2012-04-11 11:04:45 -07:00
Bob Peterson
ca9248d833 GFS2: Allow caching of rindex glock
This patch allows caching of the rindex glock. We were previously
setting the GL_NOCACHE bit when the glock was released. That forced
the rindex inode to be invalidated, which caused us to re-read
rindex at the next access. However, it caused the glock to be
unnecessarily bounced around the cluster. This patch allows
the glock to remain cached, but it still causes the rindex to be
re-read once it has been written to by gfs2_grow.

Ben and I have tested single-node gfs2_grow cases and I've tested
clustered gfs2_grow cases on my four-node cluster.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-10 13:49:53 +01:00
Bob Peterson
5e2f7d617b GFS2: Make sure rindex is uptodate before starting transactions
This patch removes the call from gfs2_blk2rgrd to function
gfs2_rindex_update and replaces it with individual calls.
The former way turned out to be too problematic.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-05 10:20:10 +01:00
Al Viro
2f99c36986 get rid of pointless includes of ext2_fs.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-31 16:03:15 -04:00
Benjamin Poirier
97cc008aaa GFS2: use depends instead of select in kconfig
Avoids having to duplicate the dependencies of what is 'select'ed (and on
down...)

Those dependencies are currently incomplete, leading to broken builds with
GFS2_FS_LOCKING_DLM=y and IP_SCTP=n.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-26 09:18:02 +01:00
Bob Peterson
c1ac539ed4 GFS2: put glock reference in error patch of read_rindex_entry
This patch fixes the error path of function read_rindex_entry
so that it correctly gives up its glock reference in cases where
there is a race to re-read the rindex after gfs2_grow.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-26 09:16:56 +01:00
Linus Torvalds
ad12ab259d Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull gfs2 changes from Steven Whitehouse.

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Change truncate page allocation to be GFP_NOFS
  GFS2: call gfs2_write_alloc_required for each chunk
  GFS2: Clean up log flush header writing
  GFS2: Remove a __GFP_NOFAIL allocation
  GFS2: Flush pending glock work when evicting an inode
  GFS2: make sure rgrps are up to date in func gfs2_blk2rgrpd
  GFS2: Eliminate sd_rindex_mutex
  GFS2: Unlock rindex mutex on glock error
  GFS2: Make bd_cmp() static
  GFS2: Sort the ordered write list
  GFS2: FITRIM ioctl support
  GFS2: Move two functions from log.c to lops.c
  GFS2: glock statistics gathering
2012-03-21 18:00:03 -07:00
Linus Torvalds
e2a0883e40 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 1 from Al Viro:
 "This is _not_ all; in particular, Miklos' and Jan's stuff is not there
  yet."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
  ext4: initialization of ext4_li_mtx needs to be done earlier
  debugfs-related mode_t whack-a-mole
  hfsplus: add an ioctl to bless files
  hfsplus: change finder_info to u32
  hfsplus: initialise userflags
  qnx4: new helper - try_extent()
  qnx4: get rid of qnx4_bread/qnx4_getblk
  take removal of PF_FORKNOEXEC to flush_old_exec()
  trim includes in inode.c
  um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
  um: embed ->stub_pages[] into mmu_context
  gadgetfs: list_for_each_safe() misuse
  ocfs2: fix leaks on failure exits in module_init
  ecryptfs: make register_filesystem() the last potential failure exit
  ntfs: forgets to unregister sysctls on register_filesystem() failure
  logfs: missing cleanup on register_filesystem() failure
  jfs: mising cleanup on register_filesystem() failure
  make configfs_pin_fs() return root dentry on success
  configfs: configfs_create_dir() has parent dentry in dentry->d_parent
  configfs: sanitize configfs_create()
  ...
2012-03-21 13:36:41 -07:00
Al Viro
48fde701af switch open-coded instances of d_make_root() to new helper
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20 21:29:35 -04:00
Cong Wang
d93492855f gfs2: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:23 +08:00
Bob Peterson
220cca2a4f GFS2: Change truncate page allocation to be GFP_NOFS
This patch changes the page allocation in gfs2_block_truncate_page
and two others to GFP_NOFS to avoid deadlock in low-memory conditions.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-20 11:05:00 +00:00
Benjamin Marzinski
58a7d5fb8e GFS2: call gfs2_write_alloc_required for each chunk
gfs2_fallocate was calling gfs2_write_alloc_required() once at the start of
the function. This caused problems since gfs2_write_alloc_required used a
long unsigned int for the len, but gfs2_fallocate could allocate a much
larger amount.  This patch will move the call into the loop where the
chunks are actually allocated and zeroed out. This will keep the allocation
size under the limit, and also allow gfs2_fallocate to quickly skip over
sections of the file that are already completely allocated.

fallcate_chunk was also not correctly setting the file size.  It was using the
len veriable to find the last block written to, but by the time it was setting
the size, the len variable had already been decremented to 0.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 15:29:10 +00:00
Steven Whitehouse
34cc1781c2 GFS2: Clean up log flush header writing
We already send both a pre and post flush to the block device
when writing a journal header. There is no need to wait for
the previous I/O specifically when we do this, unless we've
turned "barriers" off.

As a side effect, this also cleans up the code path for flushing
the journal and makes it more readable.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09 14:07:06 +00:00
Steven Whitehouse
75ca61c101 GFS2: Remove a __GFP_NOFAIL allocation
In order to ensure that we've got enough buffer heads for flushing
the journal, the orignal code used __GFP_NOFAIL when performing
this allocation. Here we dispense with that in favour of using a
mempool. This should improve efficiency in low memory conditions
since flushing the journal is a good way to get memory back, we
don't want to be spinning, waiting on memory allocations. The
buffers which are allocated via this mempool are fairly short lived,
so that we'll recycle them pretty quickly.

Although there are other memory allocations which occur during the
journal flush process, this is the one which can potentially require
the most memory, so the most important one to fix.

The amount of memory reserved is a fixed amount, and we should not need
to scale it when there are a greater number of filesystems in use.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-08 12:10:23 +00:00
Steven Whitehouse
35e478f422 GFS2: Flush pending glock work when evicting an inode
This ensures that we will not try to access the inode thats
being flushed via the glock after it has been freed.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-07 10:43:02 +00:00
Bob Peterson
58884c4df0 GFS2: make sure rgrps are up to date in func gfs2_blk2rgrpd
This patch adds a call to gfs2_rindex_update from function gfs2_blk2rgrpd
and removes calls to it that are made redundant by it. The problem is
that a gfs2_grow can add rgrps to the rindex, then put those rgrps into
use, thus rendering the rindex we read in at mount time incomplete.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-05 15:10:34 +00:00
Bob Peterson
6aad1c3d3e GFS2: Eliminate sd_rindex_mutex
Over time, we've slowly eliminated the use of sd_rindex_mutex.
Up to this point, it was only used in two places: function
gfs2_ri_total (which totals the file system size by reading
and parsing the rindex file) and function gfs2_rindex_update
which updates the rgrps in memory. Both of these functions have
the rindex glock to protect them, so the rindex is unnecessary.
Since gfs2_grow writes to the rindex via the meta_fs, the mutex
is in the wrong order according to the normal rules. This patch
eliminates the mutex entirely to avoid the problem.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-05 15:06:56 +00:00
Bob Peterson
a08fd280b5 GFS2: Unlock rindex mutex on glock error
This patch fixes an error path in function gfs2_rindex_update
that leaves the rindex mutex held.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-01 09:25:21 +00:00
Steven Whitehouse
08728f2d8b GFS2: Make bd_cmp() static
Add missing static to bd_cmp()

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 17:11:27 +00:00
Bob Peterson
4a36d08d0d GFS2: Sort the ordered write list
This patch sorts the ordered write list for GFS2 writes.
This increases the throughput for simultaneous writes.
For example, if you have ten processes, all doing:
dd if=/dev/zero of=/mnt/gfs2/fileX
on different files, the throughput will be much better.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 17:10:53 +00:00
Steven Whitehouse
66fc061bda GFS2: FITRIM ioctl support
The FITRIM ioctl provides an alternative way to send discard requests to
the underlying device. Using the discard mount option results in every
freed block generating a discard request to the block device. This can
be slow, since many block devices can only process discard requests of
larger sizes, and also such operations can be time consuming.

Rather than using the discard mount option, FITRIM allows a sweep of the
filesystem on an occasional basis, and also to optionally avoid sending
down discard requests for smaller regions.

In GFS2 FITRIM will work at resource group granularity. There is a flag
for each resource group which keeps track of which resource groups have
been trimmed. This flag is reset whenever a deallocation occurs in the
resource group, and set whenever a successful FITRIM of that resource
group has taken place. This helps to reduce repeated discard requests
for the same block ranges, again improving performance.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 17:10:21 +00:00
Steven Whitehouse
47ac5537a7 GFS2: Move two functions from log.c to lops.c
gfs2_log_get_buf() and gfs2_log_fake_buf() are both used
only in lops.c, so move them next to their callers and they
can then become static.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 17:09:59 +00:00
Steven Whitehouse
a245769f25 GFS2: glock statistics gathering
The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.

In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.

The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.

The three pairs of mean/variance measure the following
things:

 1. DLM lock time (non-blocking requests)
 2. DLM lock time (blocking requests)
 3. Inter-request time (again to the DLM)

A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.

There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.

So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:

1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.

Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.

The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 17:09:42 +00:00
Steven Whitehouse
a365fbf354 GFS2: Read resource groups on mount
This makes mount take slightly longer, but at the same time, the first
write to the filesystem will be faster too. It also means that if there
is a problem in the resource index, then we can refuse to mount rather
than having to try and report that when the first write occurs.

In addition, to avoid recursive locking, we hvae to take account of
instances when the rindex glock may already be held when we are
trying to update the rbtree of resource groups.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 09:52:39 +00:00
Bob Peterson
9e73f571ea GFS2: Ensure rindex is uptodate for fallocate
This patch fixes a problem whereby gfs2_grow was failing and causing GFS2
to assert. The problem was that when GFS2's fallocate operation tried to
acquire an "allocation" it made sure the rindex was up to date, and if not,
it called gfs2_rindex_update. However, if the file being fallocated was
the rindex itself, it was already locked at that point. By calling
gfs2_rindex_update at an earlier point in time, we bring rindex up to date
and thereby avoid trying to lock it when the "allocation" is acquired.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 09:48:30 +00:00
Bob Peterson
718b97bd6b GFS2: Read in rindex if necessary during unlink
This patch fixes a problem whereby you were unable to delete
files until other file system operations were done (such as
statfs, touch, writes, etc.) that caused the rindex to be
read in.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 09:48:02 +00:00
Steven Whitehouse
4043b886b0 GFS2: Fix race between lru_list and glock ref count
This patch fixes a narrow race window between the glock ref count
hitting zero and glocks being removed from the lru_list.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 09:43:07 +00:00
Steven Whitehouse
66ad863b41 GFS2: Fix nlink setting on inode creation
Since the nlink count will be 0, we need to use set_nlink rather
than inc_nlink in order to avoid triggering the inc_nlink warning
which was added recently.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-11 12:35:05 +00:00
David Teigland
376d37788b GFS2: fail mount if journal recovery fails
If the first mounter fails to recover one of the journals
during mount, the mount should fail.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-11 09:24:48 +00:00
David Teigland
e8ca5cc571 GFS2: let spectator mount do read only recovery
Previously, a spectator mount would not even attempt to do
journal recovery for a failed node.  This meant that if all
mounted nodes were spectators, everyone would be stuck after
a node failed, all waiting for recovery to be performed.
This is unnecessary since the failed node had a clean journal.

Instead, allow a spectator mount to do a partial "read only"
recovery, which means it will check if the failed journal is
clean, and if so, report a successful recovery.  If the failed
journal is not clean, it reports that journal recovery failed.
This makes it work the same as a read only mount on a read only
block device.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-11 09:23:40 +00:00
Bob Peterson
49528b4e47 GFS2: Fix a use-after-free that coverity spotted
In function gfs2_inplace_release it was trying to unlock a gfs2_holder
structure associated with a reservation, after said reservation was
freed. The problem is that the statements have the wrong order.
This patch corrects the order so that the reservation is freed after
the gfs2_holder is unlocked.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-11 09:23:26 +00:00
David Teigland
e0c2a9aa1e GFS2: dlm based recovery coordination
This new method of managing recovery is an alternative to
the previous approach of using the userland gfs_controld.

- use dlm slot numbers to assign journal id's
- use dlm recovery callbacks to initiate journal recovery
- use a dlm lock to determine the first node to mount fs
- use a dlm lock to track journals that need recovery

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-11 09:23:05 +00:00
Linus Torvalds
49d41bae46 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: add recovery callbacks
  dlm: add node slots and generation
  dlm: move recovery barrier calls
  dlm: convert rsb list to rb_tree
2012-01-10 14:55:55 -08:00
Linus Torvalds
eb59c505f8 Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
  PM / Hibernate: Implement compat_ioctl for /dev/snapshot
  PM / Freezer: fix return value of freezable_schedule_timeout_killable()
  PM / shmobile: Allow the A4R domain to be turned off at run time
  PM / input / touchscreen: Make st1232 use device PM QoS constraints
  PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
  PM / shmobile: Remove the stay_on flag from SH7372's PM domains
  PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
  PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  ARM: S3C64XX: Implement basic power domain support
  PM / shmobile: Use common always on power domain governor
  ...

Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
2012-01-08 13:10:57 -08:00
Linus Torvalds
1619ed8f60 Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: local functions should be static
  GFS2: We only need one ACL getting function
  GFS2: Fix multi-block allocation
  GFS2: decouple quota allocations from block allocations
  GFS2: split function rgblk_search
  GFS2: Fix up "off by one" in the previous patch
  GFS2: move toward a generic multi-block allocator
  GFS2: O_(D)SYNC support for fallocate
  GFS2: remove vestigial al_alloced
  GFS2: combine gfs2_alloc_block and gfs2_alloc_di
  GFS2: Add non-try locks back to get_local_rgrp
  GFS2: f_ra is always valid in dir readahead function
  GFS2: Fix very unlikley memory leak in ACL xattr code
  GFS2: More automated code analysis fixes
  GFS2: Add readahead to sequential directory traversal
  GFS2: Fix up REQ flags
2012-01-08 13:07:54 -08:00
Al Viro
34c80b1d93 vfs: switch ->show_options() to struct dentry *
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06 23:19:54 -05:00
David Teigland
60f98d1839 dlm: add recovery callbacks
These new callbacks notify the dlm user about lock recovery.
GFS2, and possibly others, need to be aware of when the dlm
will be doing lock recovery for a failed lockspace member.

In the past, this coordination has been done between dlm and
file system daemons in userspace, which then direct their
kernel counterparts.  These callbacks allow the same
coordination directly, and more simply.

Signed-off-by: David Teigland <teigland@redhat.com>
2012-01-04 08:56:31 -06:00
Al Viro
175a4eb7ea fs: propagate umode_t, misc bits
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:10 -05:00
Al Viro
1a67aafb5f switch ->mknod() to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:54 -05:00
Al Viro
4acdaf27eb switch ->create() to umode_t
vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:53 -05:00
Al Viro
18bb1db3e7 switch vfs_mkdir() and ->mkdir() to umode_t
vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:53 -05:00
Al Viro
6b520e0565 vfs: fix the stupidity with i_dentry in inode destructors
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else.  Not to mention the removal of
boilerplate code from ->destroy_inode() instances...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:40 -05:00
Al Viro
2a79f17e4a vfs: mnt_drop_write_file()
new helper (wrapper around mnt_drop_write()) to be used in pair with
mnt_want_write_file().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:40 -05:00
Al Viro
a561be7100 switch a bunch of places to mnt_want_write_file()
it's both faster (in case when file has been opened for write) and cleaner.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:35 -05:00
H Hartley Sweeten
46cc1e5fce GFS2: local functions should be static
Quiets the sparse noise:

warning: symbol 'gfs2_initxattrs' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-12-06 09:46:41 +00:00
Steven Whitehouse
018a01cd27 GFS2: We only need one ACL getting function
There is no need to have two versions of this function with
slightly different arguments.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-23 13:31:51 +00:00
Steven Whitehouse
6a8099ed56 GFS2: Fix multi-block allocation
Clean up gfs2_alloc_blocks so that it takes the full extent length
rather than just the number of non-inode blocks as an argument. That
will only make a difference in the inode allocation case for now.

Also, this fixes the extent length handling around gfs2_alloc_extent() so
that multi block allocations will work again.

The rd_last_alloc block is set to the final block in the allocated
extent (as per the update to i_goal, but referenced to a different
start point).

This also removes the dinode argument to rgblk_search() which is no
longer used.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-22 12:18:51 +00:00
Bob Peterson
564e12b115 GFS2: decouple quota allocations from block allocations
This patch separates the code pertaining to allocations into two
parts: quota-related information and block reservations.
This patch also moves all the block reservation structure allocations to
function gfs2_inplace_reserve to simplify the code, and moves
the frees to function gfs2_inplace_release.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-22 10:25:21 +00:00