A debug mode write failure mechanism was introduced to XFS in commit
801cc4e17a ("xfs: debug mode forced buffered write failure") to
facilitate targeted testing of delalloc indirect reservation management
from userspace. This code was subsequently rendered ineffective by the
move to iomap based buffered writes in commit 68a9f5e700 ("xfs:
implement iomap based buffered write path"). This likely went unnoticed
because the associated userspace code had not made it into xfstests.
Resurrect this mechanism to facilitate effective indlen reservation
testing from xfstests. The move to iomap based buffered writes relocated
the hook this mechanism needs to return write failure from XFS to
generic code. The failure trigger must remain in XFS. Given that
limitation, convert this from a write failure mechanism to one that
simply drops writes without returning failure to userspace. Rename all
"fail_writes" references to "drop_writes" to illustrate the point. This
is more hacky than preferred, but still triggers the XFS error handling
behavior required to drive the indlen tests. This is only available in
DEBUG mode and for testing purposes only.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
max_retries _show and _store functions should test against cfg->max_retries,
not cfg->retry_timeout
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
sparse reported that several variables and a function were not
forward-declared anywhere and therefore should be 'static'.
Found with sparse by running 'make C=2 CF=-D__CHECK_ENDIAN__ fs/xfs/'
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
As it stands today, the "fail immediately" vs. "retry forever"
values for max_retries and retry_timeout_seconds in the xfs metadata
error configurations are not consistent.
A retry_timeout_seconds of 0 means "retry forever," but a
max_retries of 0 means "fail immediately."
retry_timeout_seconds < 0 is disallowed, while max_retries == -1
means "retry forever."
Make this consistent across the error configs, such that a value of
0 means "fail immediately" (i.e. wait 0 seconds, or retry 0 times),
and a value of -1 always means "retry forever."
This makes retry_timeout a signed long to accommodate the -1, even
though it stores jiffies. Given our limit of a 1 day maximum
timeout, this should be sufficient even at much higher HZ values
than we have available today.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_error_get_cfg() is called with bp->b_error as an arg, which is
negative, so the switch statement won't ever find any matches.
This results in only the default error handler having any effect, as
EIO/ENOSPC/ENODEV get ignored due to the wrong sign.
It seems simplest to always flip the error sign to positive, so that
we can handle either negative errors in bp->b_error, or possibly a
positive errno via something like xfs_error_get_cfg(EIO) - this
future-proofs the function.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If we take "retry forever" literally on metadata IO errors, we can
hang at unmount, once it retries those writes forever. This is the
default behavior, unfortunately.
Add an error configuration option for this behavior and default it
to "fail" so that an unmount will trigger actuall errors, a shutdown
and allow the unmount to succeed. It will be noisy, though, as it
will log the errors and shutdown that occurs.
To fix this, we need to mark the filesystem as being in the process
of unmounting. Do this with a mount flag that is added at the
appropriate time (i.e. before the blocking AIL sync). We also need
to add this flag if mount fails after the initial phase of log
recovery has been run.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
now most of the infrastructure is in place, we can start adding
support for configuring specific errors such as ENODEV, ENOSPC, EIO,
etc. Add these error configurations and configure them all to have
appropriate behaviours. That is, all will be configured to retry
forever by default, except for ENODEV, which is an unrecoverable
error, so it will be configured to not retry on error
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On reception of an error, we can fail immediately, perform some
bound amount of retries or retry indefinitely. The current behaviour
we have is to retry forever.
However, we'd like the ability to choose how long the filesystem
should try after an error, it can either fail immediately, retry a
few times, or retry forever. This is implemented by using
max_retries sysfs attribute, to hold the amount of times we allow
the filesystem to retry after an error. Being -1 a special case
where the filesystem will retry indefinitely.
Add both a maximum retry count and a retry timeout so that we can
bound by time and/or physical IO attempts.
Finally, plumb these into xfs_buf_iodone error processing so that
the error behaviour follows the selected configuration.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Before we start expanding the number of error classes and errors we
can configure behaviour for, we need a simple and clear way to
define the default behaviour that we initialized each mount with.
Introduce a table based method for keeping the initial configuration
in, and apply that to the existing initialization code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With the error configuration handle for async metadata write errors
in place, we can now add initial support to the IO error processing
in xfs_buf_iodone_error().
Add an infrastructure function to look up the configuration handle,
and rearrange the error handling to prepare the way for different
error handling conigurations to be used.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now we have the basic infrastructure, add the first error class so
we can build up the infrastructure in a meaningful way. Add the
metadata async write IO error class and sysfs entry, and introduce a
default configuration that matches the existing "retry forever"
behavior for async write metadata buffers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We need to be able to change the way XFS behaviours in error
conditions depending on the type of underlying storage. This is
necessary for handling non-traditional block devices with extended
error cases, such as thin provisioned devices that can return ENOSPC
as an IO error.
Introduce the basic sysfs infrastructure needed to define and
configure error behaviours. This is done to be generic enough to
extend to configuring behaviour in other error conditions, such as
ENOMEM, which also has different desired behaviours according to
machine configuration.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add a DEBUG mode-only sysfs knob to enable forced buffered write
failure. An additional side effect of this mode is brute force killing
of delayed allocation blocks in the range of the write. The latter is
the prime motiviation behind this patch, as userspace test
infrastructure requires a reliable mechanism to create and split
delalloc extents without causing extent conversion.
Certain fallocate operations (i.e., zero range) were used for this in
the past, but the implementations have changed such that delalloc
extents are flushed and converted to real blocks, rendering the test
useless.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS now uses CRC verification over a limited section of the log to
detect torn writes prior to a crash. This is difficult to test directly
due to the timing and hardware requirements to cause a short write.
Add a mechanism to inject CRC errors into log records to facilitate
testing torn write detection during log recovery. This mechanism is
dangerous and can result in filesystem corruption. Thus, it is only
available in DEBUG mode for testing/development purposes. Set a non-zero
value to the following sysfs entry to enable error injection:
/sys/fs/xfs/<dev>/log/log_badcrc_factor
Once enabled, XFS intentionally writes an invalid CRC to a log record at
some random point in the future based on the provided frequency. The
filesystem immediately shuts down once the record has been written to
the physical log to prevent metadata writeback (e.g., AIL insertion)
once the log write completes. This helps reasonably simulate a torn
write to the log as the affected record must be safe to discard. The
next mount after the intentional shutdown requires log recovery and
should detect and recover from the torn write.
Note again that this _will_ result in data loss or worse. For testing
and development purposes only!
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch is the next step toward per-fs xfs stats. The patch makes
the show and clear routines able to handle any stats structure
associated with a kobject.
Instead of a single global xfsstats structure, add kobject and a pointer
to a per-cpu struct xfsstats. Modify the macros that manipulate the stats
accordingly: XFS_STATS_INC, XFS_STATS_DEC, and XFS_STATS_ADD now access
xfsstats->xs_stats.
The sysfs functions need to get from the kobject back to the xfsstats
structure which contains it, and pass the pointer to the ->xs_stats
percpu structure into the show & clear routines.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
As a part of the series to move xfs global stats from procfs to sysfs,
this patch consolidates the sysfs ops functions and removes redundancy.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently, xfs global stats are in procfs. This patch introduces
(replicates) the global stats in sysfs. Additionally a stats_clear file
is introduced in sysfs.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS log recovery has been discovered to have race conditions with
buffers when I/O errors occur. External tools are available to simulate
I/O errors to XFS, but this alone is not sufficient for testing log
recovery. XFS unconditionally resets the inactive region of the log
prior to log recovery to avoid confusion over processing any partially
written log records that might have been written before an unclean
shutdown. Therefore, unconditional write I/O failures at mount time are
caught by the reset sequence rather than log recovery and hinder the
ability to test the latter.
The device-mapper dm-flakey module uses an up/down timer to define a
cycle for when to fail I/Os. Create a pre log recovery delay tunable
that can be used to coordinate XFS log recovery with I/O errors
simulated by dm-flakey. This facilitates coordination in userspace that
allows the reset of stale log blocks to succeed and writes due to log
recovery to fail. For example, define a dm-flakey instance with an
uptime long enough to allow log reset to succeed and a log recovery
delay long enough to allow the dm-flakey uptime to expire.
The 'log_recovery_delay' sysfs tunable is exported under
/sys/fs/xfs/debug and is only enabled for kernels compiled in XFS debug
mode. The value is exported in units of seconds and allows for a delay
of up to 60 seconds. Note that this is for XFS debug and test
instrumentation purposes only and should not be used by applications. No
delay is enabled by default.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Create a top-level debug directory for global debug sysfs attributes.
This directory is added and removed on XFS module initialization and
removal respectively for DEBUG mode kernels only. It typically resides
at /sys/fs/xfs/debug. It is located at the top level of the xfs sysfs
hierarchy as attributes might define global behavior or behavior that
must be configured before an xfs mount is available (e.g., log recovery
behavior).
Define the global debug kobject that represents the debug sysfs
directory and add generic attribute show/store helpers to support future
attributes. No debug attributes are exported as of yet.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Create log attributes to export the current runtime state of the log to
sysfs. Note that the filesystem should be frozen for consistency across
attributes.
The following per-mount attributes are created: log_head_lsn,
log_tail_lsn, reserve_grant_head and write_grant_head. These represent
the physical log head, tail and reserve and write grant heads
respectively. Attribute values are exported in the following format:
"cycle:[block,byte]"
... where cycle represents the log cycle and [block,bytes] represents
either the basic block or byte offset of the log, depending on the
attribute. Log sequence number (LSN) values are encoded in basic blocks
and grant heads are encoded in bytes. All values are in decimal format.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Embed a kobject into the xfs log data structure (xlog). This creates a
'log' subdirectory for every XFS mount instance in sysfs. The lifecycle
of the log kobject is tied to the lifecycle of the log.
Also define a set of generic attribute handlers associated with the log
kobject in preparation for the addition of attributes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Embed a base kobject into xfs_mount. This creates a kobject associated
with each XFS mount and a subdirectory in sysfs with the name of the
filesystem. The subdirectory lifecycle matches that of the mount. Also
add the new xfs_sysfs.[c,h] source files with some XFS sysfs
infrastructure to facilitate attribute creation.
Note that there are currently no attributes exported as part of the
xfs_mount kobject. It exists solely to serve as a per-mount container
for child objects.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
