* power-supply core
- new charging_orange_full_green RGB LED trigger
- simplify and cleanup power-supply LED trigger code
- expose power information via hwmon compatibility layer
* new hardware support
- enable battery support for Qualcomm Snapdragon X Elite
- new battery driver for Maxim MAX17201/MAX17205
- new battery driver for Lenovo Yoga C630 laptop (custom EC)
* cleanup 'struct i2c_device_id' initializations
* misc. small battery driver cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=+h6p
-----END PGP SIGNATURE-----
Merge tag 'for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- new charging_orange_full_green RGB LED trigger
- simplify and cleanup power-supply LED trigger code
- expose power information via hwmon compatibility layer
New hardware support:
- enable battery support for Qualcomm Snapdragon X Elite
- new battery driver for Maxim MAX17201/MAX17205
- new battery driver for Lenovo Yoga C630 laptop (custom EC)
Cleanups:
- cleanup 'struct i2c_device_id' initializations
- misc small battery driver cleanups and fixes"
* tag 'for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: sysfs: use power_supply_property_is_writeable()
power: supply: qcom_battmgr: Enable battery support on x1e80100
power: supply: add support for MAX1720x standalone fuel gauge
dt-bindings: power: supply: add support for MAX17201/MAX17205 fuel gauge
power: reset: piix4: add missing MODULE_DESCRIPTION() macro
power: supply: samsung-sdi-battery: Constify struct power_supply_maintenance_charge_table
power: supply: samsung-sdi-battery: Constify struct power_supply_vbat_ri_table
power: supply: lenovo_yoga_c630_battery: add Lenovo C630 driver
power: supply: ingenic: Fix some error handling paths in ingenic_battery_get_property()
power: supply: ab8500: Clean some error messages
power: supply: ab8500: Use iio_read_channel_processed_scale()
power: supply: ab8500: Fix error handling when calling iio_read_channel_processed()
power: supply: hwmon: Add support for power sensors
power: supply: ab8500: remove unused struct 'inst_curr_result_list'
power: supply: bd99954: remove unused struct 'battery_data'
power: supply: leds: Add activate() callback to triggers
power: supply: leds: Share trig pointer for online and charging_full
power: supply: leds: Add power_supply_[un]register_led_trigger()
power: supply: Drop explicit initialization of struct i2c_device_id::driver_data to 0
- fix an invalid pointer dereference in error path in pwrseq core
- reduce the Kconfig noise from PCI pwrctl choices
-----BEGIN PGP SIGNATURE-----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=I1ot
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fixes from Bartosz Golaszewski:
"There's one fix for an invalid pointer dereference in error path
reported by smatch and two patches that address the noisy config
choices you reported earlier this week.
Summary:
- fix an invalid pointer dereference in error path in pwrseq core
- reduce the Kconfig noise from PCI pwrctl choices"
* tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
arm64: qcom: don't select HAVE_PWRCTL when PCI=n
Kconfig: reduce the amount of power sequencing noise
power: sequencing: fix an invalid pointer dereference in error path
- Add new Trigger for Input Events
- Add new led_mc_set_brightness() call to adapt colour/brightness for mutli-colour LEDs
- Add new lled_mc_trigger_event() call to call the above based on given trigger conditions
- Add new led_get_color_name() call, a wrapper around the existing led_colors[] array
- Add a new flag to avoid automatic renaming of LED devices
- New Drivers
- Add support for Silergy SY7802 Flash LED Controller
- Add support for Texas Instruments LP5569 LED Controller
- Add support for ChromeOS EC LED Controller
- New Device Support
- Add support for KTD202{6,7} to Kinetic KTD2026/7 LEDs
- Fix-ups
- Replace ACPI/DT firmware helpers with agnostic variants
- Make use of resource managed devm_* API calls
- Device Tree binding adaptions/conversions/creation
- Constify/staticise applicable data structures
- Trivial; spelling, whitespace, coding-style adaptions
- Drop i2c_device_id::driver_data where the value is unused
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Use generic platform device properties instead of OF/ACPI specific ones
- Consolidate/de-duplicate various functionality
- Remove superfluous/duplicated/unused sections
- Make use of the new *_scoped() guard APIs
- Improve/simplify error handling
- Bug Fixes
- Flush pending brightness changes before activating the trigger
- Repair incorrect device naming preventing matches
- Prevent memory leaks by correctly free resources during error handling routines
- Repair locking issue causing circular dependency splats and lock-ups
- Unregister sysfs entries before deactivating triggers to prevent use-after issues
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Use correct return codes expected by the callers
- Omit set_brightness() error message for a LEDs that support only HW triggers
-----BEGIN PGP SIGNATURE-----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=0Kyu
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- New trigger for Input Events
- New led_mc_set_brightness() call to adapt colour/brightness for
mutli-colour LEDs
- New lled_mc_trigger_event() call to call the above based on given
trigger conditions
- New led_get_color_name() call, a wrapper around the existing
led_colors[] array
- A new flag to avoid automatic renaming of LED devices
New Drivers:
- Silergy SY7802 Flash LED Controller
- Texas Instruments LP5569 LED Controller
- ChromeOS EC LED Controller
New Device Support:
- KTD202{6,7} support for Kinetic KTD2026/7 LEDs
Fix-ups:
- Replace ACPI/DT firmware helpers with agnostic variants
- Make use of resource managed devm_* API calls
- Device Tree binding adaptions/conversions/creation
- Constify/staticise applicable data structures
- Trivial; spelling, whitespace, coding-style adaptions
- Drop i2c_device_id::driver_data where the value is unused
- Utilise centrally provided helpers and macros to aid simplicity and
avoid duplication
- Use generic platform device properties instead of OF/ACPI specific
ones
- Consolidate/de-duplicate various functionality
- Remove superfluous/duplicated/unused sections
- Make use of the new *_scoped() guard APIs
- Improve/simplify error handling
Bug Fixes:
- Flush pending brightness changes before activating the trigger
- Repair incorrect device naming preventing matches
- Prevent memory leaks by correctly free resources during error
handling routines
- Repair locking issue causing circular dependency splats and
lock-ups
- Unregister sysfs entries before deactivating triggers to prevent
use-after issues
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Use correct return codes expected by the callers
- Omit set_brightness() error message for a LEDs that support only HW
triggers"
* tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (65 commits)
leds: leds-lp5569: Enable chip after chip configuration
leds: leds-lp5569: Better handle enabling clock internal setting
leds: leds-lp5569: Fix typo in driver name
leds: flash: leds-qcom-flash: Test the correct variable in init
leds: leds-lp55xx: Convert mutex lock/unlock to guard API
leds: leds-lp5523: Convert to sysfs_emit API
leds: leds-lp5569: Convert to sysfs_emit API
Revert "leds: led-core: Fix refcount leak in of_led_get()"
leds: leds-lp5569: Add support for Texas Instruments LP5569
leds: leds-lp55xx: Drop deprecated defines
leds: leds-lp55xx: Support ENGINE program up to 128 bytes
leds: leds-lp55xx: Generalize sysfs master_fader
leds: leds-lp55xx: Generalize sysfs engine_leds
leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode
leds: leds-lp55xx: Generalize stop_engine function
leds: leds-lp55xx: Generalize turn_off_channels function
leds: leds-lp55xx: Generalize set_led_current function
leds: leds-lp55xx: Generalize multicolor_brightness function
leds: leds-lp55xx: Generalize led_brightness function
leds: leds-lp55xx: Generalize firmware_loaded function
...
- add the pwrseq core framework
- add the first power sequencing driver: pwrseq-qcom-wcn
- add power control (pwrctl) changes to PCI core
- add the first PCI pwrctl power sequencing driver
-----BEGIN PGP SIGNATURE-----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=rI5g
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"This has been in development since last year's Linux Plumbers
Conference and was inspired by the need to enable support upstream for
Bluetooth/WLAN chips on Qualcomm platforms.
The main problem we're fixing is powering up devices which are
represented as separate objects in the kernel (binding to different
drivers) but which share parts of the power-up sequence and thus need
some kind of a mediator who knows the possible interactions and can
assure they don't interfere with neither device's bring up. An example
of such an inter-driver interaction is the WCN family of BT/WLAN chips
from Qualcomm of which some models require the user to observe a
certain delay between driving the bt-enable and wlan-enable GPIOs.
This is not a new problem but up to this point all attempts at
addressing it ended up hitting one wall or another and being dropped.
The main obstacle was the fact that most these attempts tried to
introduce the concept of a "power sequence" into the device-tree
bindings which breaks the main DT rule: describe the hardware, not its
behavior. The solution I proposed focuses on making the power
sequencer drivers interpret the actual HW description flexibly. More
details on that are in the linked cover letter.
The second problem fixed here is powering up PCI devices before they
are detected on the bus. This is achieved by creating special platform
devices for device-tree nodes describing hard-wired PCI devices which
bind to the so-called PCI power control drivers which enable required
resources and trigger a bus rescan once the controlled device is up
then setup the correct devlink hierarchy for power-management.
By combining the two new frameworks we implemented the power
sequencing PCI power control driver which is capable of powering up
the WLAN modules of the QCom WCN family of chipsets.
All this has spent a significant amount of time in linux-next and
enabled WLAN/BT support on several Qualcomm platforms. To further
prove that this is useful and needed: right after this was picked up
into next, I was sent a series using the subsystem for a similar
use-case on Amlogic platforms.
This contains the core power sequencing framework, the first driver,
PCI changes using the pwrseq library (blessed by Bjorn Helgaas) and
some fixes that came later"
* tag 'pwrseq-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled
power: sequencing: simplify returning pointer without cleanup
PCI/pwrctl: Add a PCI power control driver for power sequenced devices
PCI/pwrctl: Add PCI power control core code
PCI/pwrctl: Create platform devices for child OF nodes of the port node
PCI/pwrctl: Reuse the OF node for power controlled devices
PCI: Hold the rescan mutex when scanning for the first time
power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets
power: sequencing: implement the pwrseq core
The C standard is vague about the signedness of enums, but in this case
here, they are treated as unsigned so the error handling does not work.
Use an int type to fix this.
Fixes: c6ed48ef52 ("power: supply: add ChromeOS EC based charge control driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/ZoWKEs4mCqeLyTOB@stanley.mountain
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The x1e80100, being a compute platform, provides functionality for the
exact same power supplies as sc8280xp. Add the compatible and assign
the sc8280xp match data.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240621-x1e80100-power-supply-qcom-battmgr-v1-1-40cb89a0c144@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The MAX17201 monitors a single cell pack. The MAX17205 monitors and
balances a 2S or 3S pack or monitors a multiple-series cell pack. Both
devices use a I2C interface.
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240702090308.8848-3-dima.fedrau@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Clang warns (or errors with CONFIG_WERROR=y):
drivers/power/supply/cros_charge-control.c:319:2: error: array index 3 is past the end of the array (that has type 'struct attribute *[3]') [-Werror,-Warray-bounds]
319 | priv->attributes[_CROS_CHCTL_ATTR_COUNT] = NULL;
| ^ ~~~~~~~~~~~~~~~~~~~~~~
drivers/power/supply/cros_charge-control.c:49:2: note: array 'attributes' declared here
49 | struct attribute *attributes[_CROS_CHCTL_ATTR_COUNT];
| ^
1 error generated.
In earlier revisions of the driver, the attributes array in
cros_chctl_priv had four elements with four distinct assignments but
during review, the number of elements was changed to three through use
of an enum and the assignments became a for loop, except for this one,
which is now out of bounds. This assignment is no longer necessary
because the size of the attributes array no longer accounts for it, so
just remove it to clear up the warning.
Fixes: c6ed48ef52 ("power: supply: add ChromeOS EC based charge control driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240702-cros_charge-control-fix-clang-array-bounds-warning-v1-1-ae04d995cd1d@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Framework laptops implement a custom charge control EC command.
The upstream CrOS EC command is also present and functional but can get
overridden by the custom one.
Until Framework make both commands compatible or remove their custom
one, don't load the driver on those machines.
If the user knows they are not going to use the custom command they can
use a module parameter to load cros_charge-control anyways.
Note that the UEFI setup configuration for battery control also uses
their custom command.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-5-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The ChromeOS Embedded Controller implements a command to control charge
thresholds and behaviour.
Use it to implement the standard Linux charge_control_start_threshold,
charge_control_end_threshold and charge_behaviour sysfs UAPIs.
The driver is designed to be probed via the cros_ec mfd device.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-4-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/power/reset/piix4-poweroff.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240608-md-drivers-power-reset-v1-1-08dbc1a546a2@quicinc.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
'struct power_supply_maintenance_charge_table' is not modified in this
driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, some code also needs to be adjusted to this new const
qualifier.
On a x86_64, with allmodconfig:
Before:
======
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
4055 4584 0 8639 21bf drivers/power/supply/samsung-sdi-battery.o
After:
=====
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
4087 4552 0 8639 21bf drivers/power/supply/samsung-sdi-battery.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6caafd0ac2556a40405273b1a4badc508ea8e9b0.1719125040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
'struct power_supply_vbat_ri_table' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increase overall security.
In order to do it, some code also needs to be adjusted to this new const
qualifier.
On a x86_64, with allmodconfig:
Before:
======
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
955 7664 0 8619 21ab drivers/power/supply/samsung-sdi-battery.o
After:
=====
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
4055 4584 0 8639 21bf drivers/power/supply/samsung-sdi-battery.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/d01818abd880bf435d1106a9a6cc11a7a8a3e661.1719125040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On the Lenovo Yoga C630 WOS laptop the EC provides access to the adapter
and battery status. Add the driver to read power supply status on the
laptop.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240621-yoga-ec-driver-v8-1-daae67d0233d@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If iio_read_channel_processed() fails, 'val->intval' is not updated, but it
is still *1000 just after. So, in case of error, the *1000 accumulate and
'val->intval' becomes erroneous.
So instead of rescaling the value after the fact, use the dedicated scaling
API. This way the result is updated only when needed. In case of error, the
previous value is kept, unmodified.
This should also reduce any inaccuracies resulting from the scaling.
Finally, this is also slightly more efficient as it saves a function call
and a multiplication.
Fixes: fb24ccfbe1 ("power: supply: add Ingenic JZ47xx battery driver.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://lore.kernel.org/r/51e49c18574003db1e20c9299061a5ecd1661a3c.1719121781.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There is an useless extra comma at the end of some error messages, remove
them.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/e7ac0fa83c6100cbe4e0efa90cf99291c2423b10.1719037737.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Instead of rescaling current or voltage channels after the fact, use the
dedicated scaling API. This should reduce any inaccuracies resulting from
the scaling.
This is also slightly more efficient as it saves a function call and a
multiplication.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/5668d73b92eb6318c7f094a9a8fa914c909485ca.1719037737.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The ab8500_charger_get_[ac|vbus]_[current|voltage]() functions should
return an error code on error.
Up to now, an un-initialized value is returned.
This makes the error handling of the callers un-reliable.
Return the error code instead, to fix the issue.
Fixes: 97ab78bac5 ("power: supply: ab8500_charger: Convert to IIO ADC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/f9f65642331c9e40aaebb888589db043db80b7eb.1719037737.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This adds the power sequencing driver for the PMU modules present on the
Qualcomm WCN Bluetooth and Wifi chipsets. It uses the pwrseq subsystem
and knows how to match the sequencer to the consumer device by verifying
the relevant properties and DT layout. Using this driver will allow the
BT and WLAN drivers to respect the required delays between enabling the
two modules.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240605123850.24857-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Implement the power sequencing subsystem allowing devices to share
complex powering-up and down procedures. It's split into the consumer
and provider parts but does not implement any new DT bindings so that
the actual power sequencing is never revealed in the DT representation.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240605123850.24857-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently, more than seven power supply drivers are supporting
POWER_SUPPLY_PROP_POWER_NOW, but their power readings are not being
reported through the hwmon subsystem.
Fix this by adding support for power sensors to the power supply
hwmon integration.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240528222115.791511-1-W_Armin@gmx.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
'inst_curr_result_list' is unused since the original
commit 13151631b5 ("ab8500-fg: A8500 fuel gauge driver").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240528000634.196707-3-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
'battery_data' is unused since the original
commit 0902f83664 ("power: supply: Support ROHM bd99954 charger").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20240528000634.196707-2-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add an activate() callback to the power-supply LED triggers so that
the LED being activated will properly reflect the current power-supply
state for power-supply devices which are already fully registered
when the trigger gets activated.
This fixes e.g. wrong LED state (1) when the LED gets registered
after the power-supply device.
1) Until the psy driver has a reason to call power_supply_changed()
which may take quite a while
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531134702.166145-4-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Either 5 different LED triggers are registered for battery power-supply
devices or a single online LED trigger is used for non battery power-supply
devices.
These 5 / 1 LED trigger(s) are never used at the same time. So there is
no need for a separate LED trigger pointer for the online trigger. Rename
the first battery trigger from charging_full_trig to just trig and use this
for the online trigger too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531134702.166145-3-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add power_supply_[un]register_led_trigger() helper functions.
The primary goal of this is as a preparation patch for adding an activate
callback to the power-supply LED triggers to ensure that power-supply
LEDs get the correct initial value when the LED gets registered after
the power_supply has been registered (this will use the psy back pointer).
There also is quite a lot of code duplication in the existing LED trigger
registration in the form of the kasprintf() for the name-template for each
trigger + related error handling. This duplication is removed by these
new helpers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531134702.166145-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=nAvT
-----END PGP SIGNATURE-----
Merge tag 'ib-leds-platform-power-v6.11'
Immutable branch between LEDs, Power and RGB due for the v6.11 merge
window.
Merge it to provide functionality required by power-supply specific
LED handler cleanups depending on the newly added (multi-colour) LED
features.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a charging_orange_full_green LED trigger and the trigger is based on
led_mc_trigger_event() which can set an RGB LED when the trigger is
triggered. The LED will show orange when the battery status is charging.
The LED will show green when the battery status is full.
Link: https://lore.kernel.org/linux-leds/f40a0b1a-ceac-e269-c2dd-0158c5b4a1ad@gmail.com/
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
[hdegoede@redhat.com change color order to RGB]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531114124.45346-7-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240522164830.61646-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
further deprecate class based I2C device instantiation. All users are
converted, too. Other that that, Andi collected a number if I2C host
driver patches. Those merges have their own description.
-----BEGIN PGP SIGNATURE-----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=viLd
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c core removes an argument from the i2c_mux_add_adapter() call to
further deprecate class based I2C device instantiation. All users are
converted, too.
Other that that, Andi collected a number if I2C host driver patches.
Those merges have their own description"
* tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits)
power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter()
i2c: mux: Remove class argument from i2c_mux_add_adapter()
i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
i2c: acpi: Unbind mux adapters before delete
i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
i2c: pxa: use 'time_left' variable with wait_event_timeout()
i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
i2c: rk3x: use 'time_left' variable with wait_event_timeout()
i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout()
i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout()
i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout()
i2c: st: use 'time_left' variable with wait_for_completion_timeout()
i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout()
i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout()
i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout()
i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout()
i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout()
...
Commit 99a741aa7a ("i2c: mux: gpio: remove support for class-based
device instantiation") removed the last call to i2c_mux_add_adapter()
with a non-null class argument. Therefore the class argument can be
removed.
Note: Class-based device instantiation is a legacy mechanism which
shouldn't be used in new code, so we can rule out that this argument
may be needed again in the future.
This driver was forgotten by the patch in the Fixes tag.
Fixes: fec1982d70 ("i2c: mux: Remove class argument from i2c_mux_add_adapter()")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The of_match shall correspond to the name of the regulator subnode,
or the deprecated `regulator-compatible` property must be used:
failing to do so, the regulator won't probe (and the driver will
as well not probe).
Since the devicetree binding for this driver is actually correct
and wants DTs to use the "usb-otg-vbus-regulator" subnode name,
fix this driver by aligning the `of_match` string to what the DT
binding wants.
Fixes: 0402e8ebb8 ("power: supply: mt6360_charger: add MT6360 charger support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240410084405.1389378-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The rt9455_boost_voltage_values[] array is only used when USB PHY
support is enabled, causing a W=1 warning otherwise:
drivers/power/supply/rt9455_charger.c:200:18: error: 'rt9455_boost_voltage_values' defined but not used [-Werror=unused-const-variable=]
Enclose the definition in the same #ifdef as the references to it.
Fixes: e86d69dd78 ("power_supply: Add support for Richtek RT9455 battery charger")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-10-arnd@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update health reading to match.
As health is not checked for changes as part of the update loop, remove
the read of this from the periodic update loop. This saves I2C/1W
bandwidth. It also means we do not have to cache it, fresh values are
read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-6-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update cycle count reading to match.
As cycle count is not checked for changes as part of the update loop,
remove the read of this from the periodic update loop. This saves I2C/1W
bandwidth. It also means we do not have to cache it, fresh values are
read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update energy reading to match.
As energy is not checked for changes as part of the update loop,
remove the read of this from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update charge reading to match.
As charge state is not checked for changes as part of the update loop,
remove the read of this from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update time reading to match.
As time is not checked for changes as part of the update loop, remove
the read of the this from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update temperature reading to match.
As temp is not checked for changes as part of the update loop, remove
the read of the temperature from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-1-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The function power_supply_show_charge_behaviour() is not needed and can
be removed completely.
Removing the function also saves a spurious read of the property from
the driver on each call.
The convulted logic was a leftover from an earlier patch revision.
Some restructuring made this cleanup possible.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/all/9e035ae4-cb07-4f84-8336-1a0050855bea@redhat.com/
Fixes: 4e61f1e9d5 ("power: supply: core: fix charge_behaviour formatting")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240329-power-supply-simplify-v1-1-416f1002739f@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* new features
- axp20x_usb_power: report USB type
* cleanups
- convert lots of drivers to use devm_power_supply_register()
- convert lots of reset drivers to use devm_register_sys_off_handler()
- constify device_type and power_supply_class
- axp20x_usb_power: use correct property to report input current limit
- mm8013: correct handling of "not charging" status register
- core: fix charge_behaviour formatting
- minor fixes cleanups
-----BEGIN PGP SIGNATURE-----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=II3q
-----END PGP SIGNATURE-----
Merge tag 'for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"New features:
- axp20x_usb_power: report USB type
Cleanups:
- convert lots of drivers to use devm_power_supply_register()
- convert lots of reset drivers to use devm_register_sys_off_handler()
- constify device_type and power_supply_class
- axp20x_usb_power: use correct property to report input current limit
- mm8013: correct handling of "not charging" status register
- core: fix charge_behaviour formatting
- minor fixes cleanups"
* tag 'for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (66 commits)
power: supply: core: fix charge_behaviour formatting
power: supply: core: ease special formatting implementations
power: supply: mm8013: fix "not charging" detection
power: supply: move power_supply_attr_groups definition back to sysfs
power: supply: core: simplify power_supply_class_init
power: supply: core: add power_supply_for_each_device()
power: supply: core: make power_supply_class constant
power: supply: bq2415x_charger: report online status
power: supply: core: move power_supply_attr_group into #ifdef block
power: supply: core: Fix power_supply_init_attrs() stub
power: supply: bq27xxx: Report charge full state correctly
power: reset: rmobile-reset: Make sysc_base2 local
power: supply: core: constify the struct device_type usage
power: supply: axp288_fuel_gauge: Deny ROCK Pi X
power: reset: rmobile-reset: Map correct MMIO resource
power: reset: xgene-reboot: Fix a NULL vs IS_ERR() test
power: supply: axp288_fuel_gauge: Add STCK1A* Intel Compute Sticks to the deny-list
power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
power: reset: syscon-poweroff: Move device data into a struct
power: reset: restart-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
...
This property is documented to have a special format which exposes all
available behaviours and the currently active one at the same time. For
this special format some helpers are provided.
When the charge_behaviour property was added in
1b0b6cc803 ("power: supply: add charge_behaviour attributes"), it did
not update the default logic in in power_supply_sysfs.c to use the
format helpers. Thus by default only the currently active behaviour
is printed. This fixes the default logic to follow the documented
format.
There is currently only one in-tree drivers exposing charge behaviours -
thinkpad_acpi, which is not affected by the change, as it directly uses
the helpers and does not use the power_supply_sysfs.c logic.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240303-power_supply-charge_behaviour_prop-v2-3-8ebb0a7c2409@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
