Commit Graph

145574 Commits

Author SHA1 Message Date
Alan Cox
b8e7e40abe 8250: Fix oops from setserial
If you setserial a port which has never been initialised we change the type
but don't update the I/O method pointers. The same problem is true if you
change the io type of a port - but nobody ever does that so nobody noticed!

Remember the old type and when attaching if the type has changed reload the
port accessor pointers. We can't do it blindly as some 8250 drivers load custom
accessors and we must not stomp those.

Tested-by: Victor Seryodkin <vvscore@gmail.com>
Closes-bug: #13367
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:42:38 -07:00
Harry Ciao
715fe7af9f edac: AMD8111 & AMD8131 Kconfig fixup
The amd8111_edac.c driver will fail allmodconfig on architectures other
than PPC, introduce Kconfig dependency to avoid this, since both AMD8111
and AMD8131 chips are only adopted on Maple so far.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Harry Ciao
56ec0c7b88 edac: AMD8111 & AMD8131 use dev_name()
The "bus_id" member in the device structure has been obsolete, use
dev_name() instead.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Nikanth Karthikesan
46f7e602fb memcg: fix build warning and avoid checking for mem != null again and again
Fix build warning, "mem_cgroup_is_obsolete defined but not used" when
CONFIG_DEBUG_VM is not set.  Also avoid checking for !mem again and again.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Mel Gorman
f83a275dbc mm: account for MAP_SHARED mappings using VM_MAYSHARE and not VM_SHARED in hugetlbfs
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302

hugetlbfs reserves huge pages but does not fault them at mmap() time to
ensure that future faults succeed.  The reservation behaviour differs
depending on whether the mapping was mapped MAP_SHARED or MAP_PRIVATE.
For MAP_SHARED mappings, hugepages are reserved when mmap() is first
called and are tracked based on information associated with the inode.
Other processes mapping MAP_SHARED use the same reservation.  MAP_PRIVATE
track the reservations based on the VMA created as part of the mmap()
operation.  Each process mapping MAP_PRIVATE must make its own
reservation.

hugetlbfs currently checks if a VMA is MAP_SHARED with the VM_SHARED flag
and not VM_MAYSHARE.  For file-backed mappings, such as hugetlbfs,
VM_SHARED is set only if the mapping is MAP_SHARED and the file was opened
read-write.  If a shared memory mapping was mapped shared-read-write for
populating of data and mapped shared-read-only by other processes, then
hugetlbfs would account for the mapping as if it was MAP_PRIVATE.  This
causes processes to fail to map the file MAP_SHARED even though it should
succeed as the reservation is there.

This patch alters mm/hugetlb.c and replaces VM_SHARED with VM_MAYSHARE
when the intent of the code was to check whether the VMA was mapped
MAP_SHARED or MAP_PRIVATE.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <starlight@binnacle.cx>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Mel Gorman
32b154c0b0 x86: ignore VM_LOCKED when determining if hugetlb-backed page tables can be shared or not
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302

On x86 and x86-64, it is possible that page tables are shared beween
shared mappings backed by hugetlbfs.  As part of this,
page_table_shareable() checks a pair of vma->vm_flags and they must match
if they are to be shared.  All VMA flags are taken into account, including
VM_LOCKED.

The problem is that VM_LOCKED is cleared on fork().  When a process with a
shared memory segment forks() to exec() a helper, there will be shared
VMAs with different flags.  The impact is that the shared segment is
sometimes considered shareable and other times not, depending on what
process is checking.

What happens is that the segment page tables are being shared but the
count is inaccurate depending on the ordering of events.  As the page
tables are freed with put_page(), bad pmd's are found when some of the
children exit.  The hugepage counters also get corrupted and the Total and
Free count will no longer match even when all the hugepage-backed regions
are freed.  This requires a reboot of the machine to "fix".

This patch addresses the problem by comparing all flags except VM_LOCKED
when deciding if pagetables should be shared or not for hugetlbfs-backed
mapping.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <starlight@binnacle.cx>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Nicolas Ferre
53b7479bbd atmel_lcdfb: correct fifo size for some products
Remove wrong fifo size definition for some AT91 products.

Due to a misunderstanding of some AT91 datasheets, a fifo size of 2048
(words) has been introduced by mistake.  In fact, all products (AT91/AT32)
are sharing the same fifo size of 512 words.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Marek Szyprowski
17663e5970 S3C-fb: PM fix
Correctly restore the FrameBuffer register state in the resume function.

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Alexander Beregalov
8e8e8267f0 serial: 8250_gsc: fix printk format error
drivers/serial/8250_gsc.c:44: warning: format '%lx' expects type
'long unsigned int', but argument 2 has type 'resource_size_t'

[akpm@linux-foundation.org: fix it to handle u64's]
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Alexander Beregalov
b5d598b41a parport_gsc: fix printk format error
drivers/parport/parport_gsc.c:356: warning: format '%lx' expects type
'long unsigned int', but argument 2 has type 'resource_size_t'

[akpm@linux-foundation.org: fix it to handle u64's]
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Oskar Schirmer
c3dc5bec05 flat: fix data sections alignment
The flat loader uses an architecture's flat_stack_align() to align the
stack but assumes word-alignment is enough for the data sections.

However, on the Xtensa S6000 we have registers up to 128bit width
which can be used from userspace and therefor need userspace stack and
data-section alignment of at least this size.

This patch drops flat_stack_align() and uses the same alignment that
is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's
not defined by the architecture.

It also fixes m32r which was obviously kaput, aligning an
uninitialized stack entry instead of the stack pointer.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oskar Schirmer <os@emlix.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Acked-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Thomas Dahlmann
ba9447198b MAINTAINERS: change email address for Thomas Dahlmann
Signed-off-by: Thomas <dahlmann.thomas@arcor.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Roel Kluin
b898f4f869 drivers/serial/mpc52xx_uart.c: fix array overindexing check
The check for an overindexing of mpc52xx_uart_{ports,nodes} has an
off-by-one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Daisuke Nishimura
e767e0561d memcg: fix deadlock between lock_page_cgroup and mapping tree_lock
mapping->tree_lock can be acquired from interrupt context.  Then,
following dead lock can occur.

Assume "A" as a page.

 CPU0:
       lock_page_cgroup(A)
		interrupted
			-> take mapping->tree_lock.
 CPU1:
       take mapping->tree_lock
		-> lock_page_cgroup(A)

This patch tries to fix above deadlock by moving memcg's hook to out of
mapping->tree_lock.  charge/uncharge of pagecache/swapcache is protected
by page lock, not tree_lock.

After this patch, lock_page_cgroup() is not called under mapping->tree_lock.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
KOSAKI Motohiro
bd6daba909 procfs: make errno values consistent when open pident vs exit(2) race occurs
proc_pident_instantiate() has following call flow.

proc_pident_lookup()
  proc_pident_instantiate()
    proc_pid_make_inode()

And, proc_pident_lookup() has following error handling.

	const struct pid_entry *p, *last;
	error = ERR_PTR(-ENOENT);
	if (!task)
		goto out_no_task;

Then, proc_pident_instantiate should return ENOENT too when racing against
exit(2) occur.

EINAL has two bad reason.
  - it implies caller is wrong. bad the race isn't caller's mistake.
  - man 2 open don't explain EINVAL. user often don't handle it.

Note: Other proc_pid_make_inode() caller already use ENOENT properly.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Alexey Dobriyan
b2e1feaf0a cred: #include init.h in cred.h
linux/cred.h can't be included as first header (alphabetical order)
because it uses __init which is enough to break compilation on some archs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:01 -07:00
David Rientjes
6d2661ede5 oom: fix possible oom_dump_tasks NULL pointer
When /proc/sys/vm/oom_dump_tasks is enabled, it is possible to get a NULL
pointer for tasks that have detached mm's since task_lock() is not held
during the tasklist scan.  Add the task_lock().

Acked-by: Nick Piggin <npiggin@suse.de>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:01 -07:00
Joe Perches
681a1b4032 MAINTAINERS: pair EDAC-E752X P: and M: entries
Entries should be P: name then M: email address.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:01 -07:00
John W. Linville
aeeab4ff06 rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongle
http://bugzilla.kernel.org/show_bug.cgi?id=13383

Reported-by: Przemyslaw Kulczycki <azrael@autocom.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-29 12:41:01 +02:00
John W. Linville
21a4cc00e8 at76c50x-usb: avoid mutex deadlock in at76_dwork_hw_scan
http://bugzilla.kernel.org/show_bug.cgi?id=13312

at76_dwork_hw_scan holds a mutex while calling ieee80211_scan_completed,
which then calls at76_config which needs the same mutex.  This reworks
the ordering to not hold the lock while calling ieee80211_scan_completed.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-29 12:41:01 +02:00
Joakim Tjernlund
81e2962801 jffs2: Fix corruption when flash erase/write failure
Erase errors such as:
"Newly-erased block contained word 0xa4ef223e at offset 0x0296a014"
and failure to write the clean marker,
moves the offending erase block to erasing list before calling
jffs2_erase_failed(). This is bad as jffs2_erase_failed() will
also move the block to the bad_list, but is now moving the
wrong block, causing FS corruption.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 10:44:46 +01:00
Vladimir Barinov
8541c1180a mtd: MXC NAND driver fixes (v5)
The following patch fixes:
 - re-initialization of host->col_addr which is used as byte index
   between the successive READID flash commands.
 - compile error when CONFIG_PM is enabled
 - pass on the error code from clk_get()
 - return -ENOMEM in case of failed ioremap()
 - pass on the return value of platform_driver_probe() directly
 - remove excessive printk
 - let command line partition table parsing with mxc_nand name.
   The cmd_line parsing is done via <mtd-id> name that differs
   from mxc_nand by default and looks like "NAND 256MiB 1,8V 8-bit"

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 10:44:05 +01:00
Russell King
a35197a8be Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainline 2009-05-29 10:19:22 +01:00
Russell King
6daad5c6c5 [ARM] update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-29 10:15:08 +01:00
Finn Thain
4e0168fa48 mac8390: fix build with NET_POLL_CONTROLLER
Fix the build for CONFIG_NET_POLL_CONTROLLER that I broke with
217cbfa856 ("mac8390: fix regression
caused during net_device_ops conversion").

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 01:56:35 -07:00
Divy Le Ray
c22c814931 cxgb3: link fault fixes
Do not call t3_link_fault() under spinlock, as it calls msleep().
Besides, only the access to pi->link_fault needs to be serialized.

Also initialize local variables before checking the link status,
link state fields might otherwise end up containing garbage.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 01:54:41 -07:00
Divy Le Ray
10b6d95612 cxgb3: fix dma mapping regression
Commit 5e68b772e6
  cxgb3: map entire Rx page, feed map+offset to Rx ring.

introduced a regression on platforms defining DECLARE_PCI_UNMAP_ADDR()
and related macros as no-ops.

Rx descriptors are fed with the a page buffer bus address + page chunk offset.
The page buffer bus address is set and retrieved through
pci_unamp_addr_set(), pci_unmap_addr().
These functions being meaningless on x86 (if CONFIG_DMA_API_DEBUG is not set).
The HW ends up with a bogus bus address.

This patch saves the page buffer bus address for all plaftorms.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 01:54:37 -07:00
Len Brown
2f102607ac i7300_idle: allow testing on i5000-series hardware w/o re-compile
Testing the i7300_idle driver on i5000-series hardware required
an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build
of both i7300_idle and ioat_dma.

Replace that build-time scheme with a load-time module parameter:
"7300_idle.forceload=1" to make it easier to test the driver
on hardware that while not officially validated, works fine
and is much more commonly available.

By default (no modparam) the driver will continue to load
only on the i7300.

Note that ioat_dma runs a copy of i7300_idle's probe routine
to know to reserve an IOAT channel for i7300_idle.
This change makes ioat_dma do that always on the i5000,
just like it does on the i7300.

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Andrew Henroid <andrew.d.henroid@intel.com>
2009-05-28 20:52:40 -04:00
Kay Sievers
5c8563d773 Driver Core: do not oops when driver_unregister() is called for unregistered drivers
We also fix a problem with cleaning up properly when initializing
drivers and devices, so checks like this will work successfully.

Portions of the patch by Linus and Greg and Ingo.

Reported-by: Ozan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 14:24:07 -07:00
Andrew Morton
086a377edc sysfs: file.c: use create_singlethread_workqueue()
We don't need a kernel thread per CPU for this application.

Acked-by: Alex Chiang <achiang@hp.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 14:24:07 -07:00
Mike Frysinger
29868b281f Revert "USB: Correct Makefile to make isp1760 buildable"
This reverts commit 26e1287594.

A larger patch (f7e7aa585) a few days after this one added the same line
to the Makefile, but in a different place.  While it'd be more correct to
revert that one, it's easier to revert this one because this is a
one-liner.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Greg Kroah-Hartman <gregkh@suse.de>
CC: linux-usb@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 13:54:43 -07:00
Alan Stern
0a3c8549ea usb-serial: fix crash when sub-driver updates firmware
This patch (as1244) fixes a crash in usb-serial that occurs when a
sub-driver returns a positive value from its attach method, indicating
that new firmware was loaded and the device will disconnect and
reconnect.  The usb-serial core then skips the step of registering the
port devices; when the disconnect occurs, the attempt to unregister
the ports fails dramatically.

This problem shows up with Keyspan devices and it might affect others
as well.

When the attach method returns a positive value, the patch sets
num_ports to 0.  This tells usb_serial_disconnect() not to try
unregistering any of the ports; instead they are cleaned up by
destroy_serial().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 13:54:43 -07:00
Warren Free
0afb20e00b USB: isp1760: urb_dequeue doesn't always find the urbs
The option driver (and presumably others) allocates several URBs when it
opens and tries to free them when it closes. The isp1760_urb_dequeue
function gets called, but the packet being dequeued is not necessarily at
the
front of one of the 32 queues. If not, the isp1760_urb_done function doesn't
get called for the URB and the process trying to free it hangs forever on a
wait_queue. This patch does two things. If the URB being dequeued has others
queued behind it, it re-queues them. And it searches the queues looking for
the URB being dequeued rather than just looking at the one at the front of
the queue.

[bigeasy@linutronix] whitespace fixes, reformating

Cc: stable <stable@kernel.org>
Signed-off-by: Warren Free <wfree@ipmn.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 13:54:43 -07:00
Xiao Kaijian
cab98a0a34 USB: Yet another Conexant Clone to add to cdc-acm.c
This patch adds another quirky Conexant USB Modem Clone to usb cdc-acm.c

Signed-off-by: Xiao Kaijian <xiaokj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 13:54:41 -07:00
Haavard Skinnemoen
fe92c9e481 USB: atmel_usb_udc: Use kzalloc() to allocate ep structures
This ensures that all fields are properly initialized.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 13:54:41 -07:00
Martin Fuzzey
f42706c904 USB: atmel-usba-udc : fix control out requests.
usbtest #14 was failing with "udc: ep0: TXCOMP: Invalid endpoint state 2, halting endpoint..."
This occured since ep0 is bidirectional and ep->is_in is not valid (must always use ep->state)

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 13:54:40 -07:00
Mathieu Desnoyers
ecd322c9b3 [ARM] Add cmpxchg support for ARMv6+ systems (v5)
Add cmpxchg/cmpxchg64 support for ARMv6K and ARMv7 systems
(original patch from Catalin Marinas <catalin.marinas@arm.com>)

The cmpxchg and cmpxchg64 functions can be implemented using the
LDREX*/STREX* instructions. Since operand lengths other than 32bit are
required, the full implementations are only available if the ARMv6K
extensions are present (for the LDREXB, LDREXH and LDREXD instructions).

For ARMv6, only 32-bits cmpxchg is available.

Mathieu :

Make cmpxchg_local always available with best implementation for all type sizes (1, 2, 4 bytes).
Make cmpxchg64_local always available.

Use "Ir" constraint for "old" operand, like atomic.h atomic_cmpxchg does.

Change since v3 :
- Add "memory" clobbers (thanks to Nicolas Pitre)
- removed __asmeq(), only needed for old compilers, very unlikely on ARMv6+.

Note : ARMv7-M should eventually be ifdefed-out of cmpxchg64. But it's not
supported by the Linux kernel currently.

Put back arm < v6 cmpxchg support.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-28 21:10:31 +01:00
Russell King
bac4e960b5 [ARM] barriers: improve xchg, bitops and atomic SMP barriers
Mathieu Desnoyers pointed out that the ARM barriers were lacking:

- cmpxchg, xchg and atomic add return need memory barriers on
  architectures which can reorder the relative order in which memory
  read/writes can be seen between CPUs, which seems to include recent
  ARM architectures. Those barriers are currently missing on ARM.

- test_and_xxx_bit were missing SMP barriers.

So put these barriers in.  Provide separate atomic_add/atomic_sub
operations which do not require barriers.

Reported-Reviewed-and-Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-28 19:39:27 +01:00
Dmitry Torokhov
a3ce6ea46c Input: libps2 - better handle bad scheduler decisions
Sometimes devices send us their responses in time but due to
unfortunate scheduling decisions the receiving thread does not
get scheduled till much later and we erroneously decide that
device timed out. Work around this problem by checking whether we
received the data we needed instead of checking timeout
condition.

Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-28 10:34:02 -07:00
Paulius Zaleckas
67a433ce27 Gemini: Fix SRAM/ROM location after memory swap
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-05-28 16:42:25 +03:00
Paulius Zaleckas
f49afbb572 MAINTAINER: Add F: entries for Gemini and FA526
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-05-28 16:41:36 +03:00
Takashi Iwai
817682c11b Merge branch 'fix/hda' into for-linus
* fix/hda:
  ALSA: hda - Compaq Presario CQ60 patching for Conexant
2009-05-28 12:02:13 +02:00
Tony Vroon
1812e67c74 ALSA: hda - Compaq Presario CQ60 patching for Conexant
A docking mic control is shown by default. The Compaq Presario
CQ60 laptop has no docking connector, so designate it as a
CXT5051_HP model.
This makes the phantom mixer slider disappear.

Signed-off-by: Tony Vroon <tony@linx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-28 07:36:20 +02:00
Steve Wise
98779be861 svcrdma: dma unmap the correct length for the RPCRDMA header page.
The svcrdma module was incorrectly unmapping the RPCRDMA header page.
On IBM pserver systems this causes a resource leak that results in
running out of bus address space (10 cthon iterations will reproduce it).
The code was mapping the full page but only unmapping the actual header
length.  The fix is to only map the header length.

I also cleaned up the use of ib_dma_map_page() calls since the unmap
logic always uses ib_dma_unmap_single().  I made these symmetrical.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-27 18:57:24 -04:00
David S. Miller
4d3383d0ad Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6 2009-05-27 15:51:25 -07:00
J. Bruce Fields
7f4218354f nfsd: Revert "svcrpc: take advantage of tcp autotuning"
This reverts commit 47a14ef1af "svcrpc:
take advantage of tcp autotuning", which uncovered some further problems
in the server rpc code, causing significant performance regressions in
common cases.

We will likely reinstate this patch after releasing 2.6.30 and applying
some work on the underlying fixes to the problem (developed by Trond).

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Olga Kornievskaia <aglo@citi.umich.edu>
Cc: Jim Rees <rees@umich.edu>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-27 18:51:06 -04:00
Kenji Kaneshige
dacd2549ca PCI/ACPI: fix wrong ref count handling in acpi_pci_bind()
The 'dev' field of struct acpi_pci_data is having a pointer to struct
pci_dev without incrementing the reference counter. Because of this, I
got the following kernel oops when I was doing some pci hotplug
operations. This patch fixes this bug by replacing wrong hand-made
pci_find_slot() with pci_get_slot() in acpi_pci_bind().

 BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8
 IP: [<ffffffff803f0e9b>] acpi_pci_unbind+0xb1/0xdd

 Call Trace:
  [<ffffffff803ecee4>] acpi_bus_remove+0x54/0x68
  [<ffffffff803ecf6d>] acpi_bus_trim+0x75/0xe3
  [<ffffffffa0345ddd>] acpiphp_disable_slot+0x16d/0x1e0 [acpiphp]
  [<ffffffffa03441f0>] disable_slot+0x20/0x60 [acpiphp]
  [<ffffffff803cfc18>] power_write_file+0xc8/0x110
  [<ffffffff803c6a54>] pci_slot_attr_store+0x24/0x30
  [<ffffffff803469ce>] sysfs_write_file+0xce/0x140
  [<ffffffff802e94e7>] vfs_write+0xc7/0x170
  [<ffffffff802e9aa0>] sys_write+0x50/0x90
  [<ffffffff8020bd6b>] system_call_fastpath+0x16/0x1b

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Tested-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 17:53:07 -04:00
Wei Yongjun
a0d24b295a nfsd: fix hung up of nfs client while sync write data to nfs server
Commit 'Short write in nfsd becomes a full write to the client'
(31dec2538e) broken the sync write.
With the following commands to reproduce:

  $ mount -t nfs -o sync 192.168.0.21:/nfsroot /mnt
  $ cd /mnt
  $ echo aaaa > temp.txt

Then nfs client is hung up.

In SYNC mode the server alaways return the write count 0 to the
client. This is because the value of host_err in nfsd_vfs_write()
will be overwrite in SYNC mode by 'host_err=nfsd_sync(file);',
and then we return host_err(which is now 0) as write count.

This patch fixed the problem.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-27 17:40:06 -04:00
Kumar Gala
b787f2e2a3 fsldma: Fix compile warnings
We we build with dma_addr_t as a 64-bit quantity we get:

drivers/dma/fsldma.c: In function 'fsl_chan_xfer_ld_queue':
drivers/dma/fsldma.c:625: warning: cast to pointer from integer of different size
drivers/dma/fsldma.c: In function 'fsl_dma_chan_do_interrupt':
drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size
drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size
drivers/dma/fsldma.c: In function 'of_fsl_dma_probe':
drivers/dma/fsldma.c:927: warning: cast to pointer from integer of different

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-05-27 13:40:00 -07:00
Kristian Høgsberg
07f4f3e8a2 i915: Set object to gtt domain when faulting it back in
When a GEM object is evicted from the GTT we set it to the CPU domain,
as it might get swapped in and out or ever mmapped regularly.  If the
object is mmapped through the GTT it can still get evicted in this way
by other objects requiring GTT space.  When the GTT mapping is touched
again we fault it back into the GTT, but fail to set it back to the
GTT domain.  This means we fail to flush any cached CPU writes to the
pages backing the object which will then happen "eventually", typically
after we write to the page through the uncached GTT mapping.

[anholt: Note that userland does do a set_domain(GTT, GTT) when starting
to access the GTT mapping.  That covers getting the existing mapping of the
object synchronized if it's bound to the GTT.  But set_domain(GTT, GTT)
doesn't do anything if the object is currently unbound.  This fix covers the
transition to being bound for GTT mapping.]

Fixes glyph and other pixmap corruption during swapping.  fd.o bug #21790

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-27 13:06:47 -07:00