Commit Graph

297 Commits

Author SHA1 Message Date
Dominik Brodowski
ffd81dcfef cpufreq: Add and use cpufreq_for_each_{valid_,}entry_idx()
Pointer subtraction is slow and tedious. Therefore, replace all instances
where cpufreq_for_each_{valid_,}entry loops contained such substractions
with an iteration macro providing an index to the frequency_table entry.

Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Link: http://lkml.kernel.org/r/20180120020237.GM13338@ZenIV.linux.org.uk
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-08 10:21:39 +01:00
Linus Torvalds
e37e0ee019 A couple of dma-mapping updates:
- turn dma_cache_sync into a dma_map_ops instance and remove
    implementation that purely are dead because the architecture
    doesn't support noncoherent allocations
  - add a flag for busses that need DMA configuration (Robin Murphy)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAloLSrYLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYOMuQ//XXD94uNPYavrgXzGsAtg+I+LEm+xyk4T0dX5fxfj
 amXX49MHoGemjsBgzJlkQMMFqwDEdkKyEuFnEuy6OeowYCyD6zW0MJ3MwP9OosNJ
 PNTdGZIfSvxPYEW8cR9AdK3iQ2loMBZnYhd+O/oVjSugULLW2DNa7r2VRktcCKoh
 8Ob/8gL6Y9xEYJBRszhrBwKTa/hU8IThxxozBFzN7I3LIKyFboSTcwXGLAHow43g
 4anCTjWTaDcoU2JwY6UTRKRRTV+gD0ZRcsZfd8lNNb5rtMVZkBVOHbF14SMAmw1r
 kSgRcU3+WIFPhK/8wBYqtGZZGnOgFBTHVeqow3AdS728pBWlWl8niTK0DiIgCd3m
 qzScF6SqfN1bCZkZAy8FUV2l0DPYKS6lvyNkf00Eb2W/f6LEqAcjCi2QDDxRfaw+
 Vm97nPUiM+uXNy/6KtAy6ChdprSqx12/edXPp7Y3H2rS/+Dmr6exeix+wb7QUN8W
 JI7ZRHo4JLaJZk/XrZtGX/6jnN1Jo7vfApQOmYDY7kE1iGtOU/LQQj8gcZRVQxML
 4soN6ivSmZX2k03LabWHpYQ8QiyCSYChLC+Az7rQH47LDLeu1IdTJu6orpXpaxyo
 ymzEWlHbmF7mE66X4g/Up/eAYk2YLUA3rKLGVjAIaWDBzHftSFg5EaAnqMADC1G2
 hSo=
 =ALJf
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - turn dma_cache_sync into a dma_map_ops instance and remove
   implementation that purely are dead because the architecture doesn't
   support noncoherent allocations

 - add a flag for busses that need DMA configuration (Robin Murphy)

* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: turn dma_cache_sync into a dma_map_ops method
  sh: make dma_cache_sync a no-op
  xtensa: make dma_cache_sync a no-op
  unicore32: make dma_cache_sync a no-op
  powerpc: make dma_cache_sync a no-op
  mn10300: make dma_cache_sync a no-op
  microblaze: make dma_cache_sync a no-op
  ia64: make dma_cache_sync a no-op
  frv: make dma_cache_sync a no-op
  x86: make dma_cache_sync a no-op
  floppy: consolidate the dummy fd_cacheflush definition
  drivers: flag buses which demand DMA configuration
2017-11-14 16:54:12 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Christoph Hellwig
e0c6584df9 sh: make dma_cache_sync a no-op
sh does not implement DMA_ATTR_NON_CONSISTENT allocations, so it doesn't
make any sense to do any work in dma_cache_sync given that it
must be a no-op when dma_alloc_attrs returns coherent memory.

On the other hand sh uses dma_cache_sync internally in the dma_ops
implementation and for the maple bus that does not use the DMA API,
so a the old functionality for dma_cache_sync is still provided under
the name sh_sync_dma_for_device, and without the redundant dev
argument.  While at it two of the syncing dma_ops also go the proper
_for_device postfix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-10-19 16:37:44 +02:00
SF Markus Elfring
c509e05fc1 drivers/sh/intc/virq.c: delete an error message for a failed memory allocation in add_virq_to_pirq()
This issue was detected by using the Coccinelle software.

Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Link: http://lkml.kernel.org/r/54e30d61-5183-9911-cf35-1410fb78da5a@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:30 -07:00
Greg Kroah-Hartman
9f4ac349bd sh: superhyway: use dev_groups and not dev_attrs for bus_type
The dev_attrs field has long been "depreciated" and is finally being
removed, so move the driver to use the "correct" dev_groups field
instead for struct bus_type.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-sh@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:00:46 +02:00
Johannes Weiner
6d75f366b9 lib: radix-tree: check accounting of existing slot replacement users
The bug in khugepaged fixed earlier in this series shows that radix tree
slot replacement is fragile; and it will become more so when not only
NULL<->!NULL transitions need to be caught but transitions from and to
exceptional entries as well.  We need checks.

Re-implement radix_tree_replace_slot() on top of the sanity-checked
__radix_tree_replace().  This requires existing callers to also pass the
radix tree root, but it'll warn us when somebody replaces slots with
contents that need proper accounting (transitions between NULL entries,
real entries, exceptional entries) and where a replacement through the
slot pointer would corrupt the radix tree node counts.

Link: http://lkml.kernel.org/r/20161117193021.GB23430@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-12 18:55:08 -08:00
Geert Uytterhoeven
4c6d7e2289 drivers: sh: Stop using the legacy clock domain on ARM
Since commits 71d076ceb2 ("ARM: shmobile: Enable PM and
PM_GENERIC_DOMAINS for SoCs with PM Domains") and 2ee98234b8
("arm64: renesas: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM
Domains"), CONFIG_PM and CONFIG_PM_GENERIC_DOMAINS are enabled
unconditionally for Renesas ARM-based SoCs. Hence the legacy clock
domain is no longer used on these SoCs.

Remove the related support code, and stop entering drivers/sh/ on ARM.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30 09:41:11 +09:00
Ingo Molnar
bc94b99636 Linux 4.5-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW0yM6AAoJEHm+PkMAQRiGeUwIAJRTHFPJTFpJcJjeZEV4/EL1
 7Pl0WSHs/CWBkXIevAg2HgkECSQ9NI9FAUFvoGxCldDpFAnL1U2QV8+Ur2qhiXMG
 5v0jILJuiw57qT/NfhEudZolerlRoHILmB3JRTb+DUV4GHZuWpTkJfUSI9j5aTEl
 w83XUgtK4bKeIyFbHdWQk6xqfzfFBSuEITuSXreOMwkFfMmeScE0WXOPLBZWyhPa
 v0rARJLYgM+vmRAnJjnG8unH+SgnqiNcn2oOFpevKwmpVcOjcEmeuxh/HdeZf7HM
 /R8F86OwdmXsO+z8dQxfcucLg+I9YmKfFr8b6hopu1sRztss2+Uk6H1j2J7IFIg=
 =tvkh
 -----END PGP SIGNATURE-----

Merge tag 'v4.5-rc6' into core/resources, to resolve conflict

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-04 12:12:08 +01:00
Geert Uytterhoeven
0378ba4899 drivers: sh: Restore legacy clock domain on SuperH platforms
CONFIG_ARCH_SHMOBILE is not only enabled for Renesas ARM platforms
(which are DT based and multi-platform), but also on a select set of
Renesas SuperH platforms (SH7722/SH7723/SH7724/SH7343/SH7366). Hence
since commit 0ba58de231 ("drivers: sh: Get rid of
CONFIG_ARCH_SHMOBILE_MULTI"), the legacy clock domain is no longer
installed on these SuperH platforms, and module clocks may not be
enabled when needed, leading to driver failures.

To fix this, add an additional check for CONFIG_OF.

Fixes: 0ba58de231 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-25 09:05:19 +09:00
Toshi Kani
9a975bee4b drivers: Initialize resource entry to zero
I/O resource descriptor, 'desc' in struct resource, needs to be
initialized to zero by default.  Some drivers call kmalloc() to
allocate a resource entry, but do not initialize it to zero by
memset().  Change these drivers to call kzalloc(), instead.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-parisc@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Link: http://lkml.kernel.org/r/1453841853-11383-10-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-30 09:49:58 +01:00
Geert Uytterhoeven
6575a9c69a drivers: sh: clk: Avoid crashes when passing NULL clocks
Several clock API functions handle NULL clocks when the Common Clock
Framework is used, while their legacy SH counterparts don't, and would
just crash when a NULL clock is passed.

Add NULL checks to clk_get_rate(), clk_set_rate(), clk_get_parent(), and
clk_round_rate(), to avoid different behavior in drivers shared between
legacy and CCF-based platforms.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-24 11:49:18 +09:00
Geert Uytterhoeven
90069ad1b6 drivers: sh: clk: Remove obsolete and unused clk_round_parent()
clk_round_parent() was only ever used by AP4EVB, until commit
b24bd7e97b ("ARM: shmobile: Remove AP4EVB board support").

The Common Clock Framework does not provide clk_round_parent(), hence
remove it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-24 11:48:35 +09:00
Geert Uytterhoeven
0ba58de231 drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI
Shmobile is all multiplatform these days, so get rid of the reference to
CONFIG_ARCH_SHMOBILE_MULTI.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-17 02:12:46 +09:00
Linus Torvalds
ac2fc4b9d5 SH Drivers Updates for v4.3
* Disable PM runtime for multi-platform ARM with genpd
 * Disable legacy default PM Domain on emev2
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV+oBkAAoJENfPZGlqN0++vesP/ilhKE7dccSFJXTBzLoyW2EB
 o1KGl/mhrK79vFPByJ65E9x0dwNHacHBrfkek7ue/FUe7/XcGpO5iQQppbsuIaPu
 k7Nn5S+tuvCBuSTDXrnN7tVkXR8gnAUFb6cHIySPOtICviwGENYtryz2KT5qg5aK
 GTaTCE6tGXOpTaNhSMyDLwMVcHTFk7nLvUfedIxfsFHyzrIJh3hqkp3s0gyQjs94
 j1nzbO25vllYGGy34AGhoQOrr4qgXh40W0qb22L0UV2vchmnNM0TnECFB9PJJ7Gh
 nyZQ5BqMDXtiGeL6GwyWxecPVnxRRbWzqA5AKWsmXKGWRHhtRK+IBQwEQtLXEkuU
 ko4szEEv+d0/GOt28yCQTW27n4k+gM19AAVCXVKikezvIxKOiCtus1S1Vf5v8vkt
 IBAIHGLFJrgC9fYNaa4Wz+5IPU/ZqCBaSXEn880PjvR+F+v2NtfRU+fp+8UeUCuS
 z0/qtMsilzVm5aN96e+SkPHntPUTWuGHyyHjX04G3gpAO9tZz1F8nLe1QCWFvtuQ
 oaGrS2bmXqaVE10zll6ea0N4T+SJk/dvpvKA69hGFj9fq+HEnOS4XxYjXYGvbwPe
 /TyvCHHEoOC1aeOM15XzmlEi8tm8BRZgYMbnaOdD/+h/DTJyCrQ6Br36R7JIv8wA
 VXaYdz6MQHPfnv9Oqyqc
 =dmkr
 -----END PGP SIGNATURE-----

Merge tag 'renesas-sh-drivers-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

Pull SH drivers updates from Simon Horman:
 "I am sending this change after v4.3-rc1 has been released as it
  depends on SoC changes which are present in that rc release.

  Summary:

   - disable PM runtime for multi-platform ARM with genpd

   - disable legacy default PM Domain on emev2"

* tag 'renesas-sh-drivers-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  drivers: sh: Disable PM runtime for multi-platform ARM with genpd
  drivers: sh: Disable legacy default PM Domain on emev2
2015-09-21 12:02:27 -07:00
Rob Herring
3e15135b98 sh: Kill off set_irq_flags usage
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed. There appears to be a great deal of
blind copy and paste of this code.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Simon Horman <horms@verge.net.au>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sh@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/1440889285-5637-4-git-send-email-robh@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16 16:53:39 +02:00
Thomas Gleixner
bd0b9ac405 genirq: Remove irq argument from irq flow handlers
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16 15:47:51 +02:00
Geert Uytterhoeven
cbc41d0a76 drivers: sh: Disable PM runtime for multi-platform ARM with genpd
If the default PM Domain using PM_CLK is used for PM runtime, the real
Clock Domain cannot be registered from DT later.

Hence do not enable it when running a multi-platform kernel with genpd
support on R-Car or RZ.  The CPG/MSTP Clock Domain driver will take care
of PM runtime management of the module clocks.

Now most multi-platform ARM shmobile platforms (SH-Mobile, R-Mobile,
R-Car, RZ) use DT-based PM Domains to take care of PM runtime management
of the module clocks, simplify the platform logic by replacing the
explicit SoC checks by a single check for the presence of MSTP clocks in
DT.

Backwards-compatiblity with old DTs (mainly for R-Car Gen2) is provided
by checking for the presence of a "#power-domain-cells" property in DT.

The default PM Domain is still needed for:
  - backwards-compatibility with old DTs that lack PM Domain properties,
  - the CONFIG_PM=n case,
  - legacy (non-DT) ARM/shmobile platforms without genpd support
    (r8a7778, r8a7779),
  - legacy SuperH.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-14 10:20:23 +09:00
Geert Uytterhoeven
9b302c1acf drivers: sh: Disable legacy default PM Domain on emev2
EMMA Mobile EV2 doesn't have MSTP clocks. All its device drivers manage
clocks explicitly, without relying on Runtime PM, so it doesn't need the
legacy default PM Domain.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-14 10:20:22 +09:00
Thomas Gleixner
c497615c0c sh/intc: Prepare irq flow handlers for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Link: http://lkml.kernel.org/r/20150713151626.872605327@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-29 10:08:09 +02:00
Jiang Liu
8228a04896 sh/intc: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we
already have a pointer to corresponding irq_desc.

Also replace generic_handle_irq with generic_handle_irq_desc() to avoid
looking up irq_desc again.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20150713151626.792845830@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-29 10:08:08 +02:00
Thomas Gleixner
8b8149df9c sh/irq: Use access helper irq_data_get_affinity_mask()
This is a preparatory patch for moving irq_data struct members.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20150713151626.713278346@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-29 10:08:08 +02:00
Jiang Liu
d0abe2f3a9 sh/irq: Use irq accessor functions instead of open coded access
This is a preparatory patch for refactoring the internals if irq_data.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20150713151626.616384365@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-29 10:08:07 +02:00
Linus Torvalds
d5fb82137b Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
 "This contains:

   - a series of fixes for interrupt drivers to prevent a potential race
     when installing a chained interrupt handler

   - a fix for cpumask pointer misuse

   - a fix for using the wrong interrupt number from struct irq_data

   - removal of unused code and outdated comments

   - a few new helper functions which allow us to cleanup the interrupt
     handling code further in 4.3

   I decided against doing the cleanup at the end of this merge window
   and rather do the preparatory steps for 4.3, so we can run the final
   ABI change at the end of the 4.3 merge window with less risk"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked()
  genirq: Implement irq_set_handler_locked()/irq_set_chip_handler_name_locked()
  genirq: Introduce helper irq_desc_get_irq()
  genirq: Remove irq_node()
  genirq: Clean up outdated comments related to include/linux/irqdesc.h
  mn10300: Fix incorrect use of irq_data->affinity
  MIPS/ralink: Fix race in installing chained IRQ handler
  MIPS/pci: Fix race in installing chained IRQ handler
  MIPS/ath25: Fix race in installing chained IRQ handler
  MIPS/ath25: Fix race in installing chained IRQ handler
  m68k/psc: Fix race in installing chained IRQ handler
  avr32/at32ap: Fix race in installing chained IRQ handler
  sh/intc: Fix race in installing chained IRQ handler
  sh/intc: Fix potential race in installing chained IRQ handler
  pinctrl/sun4i: Fix race in installing chained IRQ handler
  pinctrl/samsung: Fix race in installing chained IRQ handler
  pinctrl/samsung: Fix race in installing chained IRQ handler
  pinctrl/exynos: Fix race in installing chained IRQ handler
  pinctrl/st: Fix race in installing chained IRQ handler
  pinctrl/adi2: Fix race in installing chained IRQ handler
  ...
2015-07-01 15:19:35 -07:00
Thomas Gleixner
51b971b1b9 sh/intc: Fix race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: linux-sh@vger.kernel.org
2015-06-25 11:57:50 +02:00
Thomas Gleixner
beab99fe83 sh/intc: Fix potential race in installing chained IRQ handler
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by moving the call to
irq_set_chained_handler() after the function which sets up the handler
data.

Found by code inspection.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: linux-sh@vger.kernel.org
2015-06-25 11:57:19 +02:00
Rajendra Nayak
d2c4b43d88 drivers: sh: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS
USE_PM_CLK_RUNTIME_OPS is introduced so we don't repeat the same code
to do runtime_suspend and runtime_resume across users of PM clocks.
Use it to remove the boilerplate code.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-12 23:55:38 +02:00
Geert Uytterhoeven
00170528f0 drivers: sh: Remove test for now unsupported sh7372
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-27 13:08:14 +09:00
Geert Uytterhoeven
230f259ffe drivers: sh: Disable PM runtime for multi-platform r8a73a4 with genpd
If the default PM domain using PM_CLK is used for PM runtime, the real PM
domain(s) cannot be registered from DT later.

Hence do not enable it when running a multi-platform kernel with genpd
support on an r8a73a4. The R-Mobile PM domain driver will take care of
PM runtime management of the module clocks.

The default PM domain is still needed for:
  - platforms without genpd support,
  - the legacy (non-DT) case, where genpd may take over later, except
    for the C5 "always on" PM domain.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-27 13:08:13 +09:00
Geert Uytterhoeven
41b4b3bc79 drivers: sh: Disable PM runtime for multi-platform sh73a0 with genpd
If the default PM domain using PM_CLK is used for PM runtime, the real PM
domain(s) cannot be registered from DT later.

Hence do not enable it when running a multi-platform kernel with genpd
support on an sh73a0. The R-Mobile PM domain driver will take care of
PM runtime management of the module clocks.

The default PM domain is still needed for:
  - platforms without genpd support,
  - the legacy (non-DT) case, where genpd may take over later, except
    for the C5 "always on" PM domain.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-27 13:08:12 +09:00
Geert Uytterhoeven
a5cb514f1f drivers: sh: Disable PM runtime for multi-platform r8a7740 with genpd
If the default PM domain using PM_CLK is used for PM runtime, the real PM
domain(s) cannot be registered from DT later.

Hence do not enable it when running a multi-platform kernel with genpd
support on an r8a7740. The R-Mobile PM domain driver will take care of
PM runtime management of the module clocks.

The default PM domain is still needed for:
  - platforms without genpd support,
  - the legacy (non-DT) case, where genpd may take over later, except
    for the C5 "always on" PM domain.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 07:26:12 +09:00
Rafael J. Wysocki
300be5b9e1 drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM in drivers/sh/pm_runtime.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2014-12-05 03:08:24 +01:00
Ulf Hansson
f1bf45c70f drivers: sh: Leave disabling of unused PM domains to genpd
Since genpd at late init, will try to disable unused PM domains we
don't need to do it from here as well.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:13 +02:00
Geert Uytterhoeven
049d28048b sh: intc: Confine SH_INTC to platforms that need it
Currently the sh-intc driver is compiled on all SuperH and
non-multiplatform SH-Mobile platforms, while it's only used on a limited
number of platforms:
  - SuperH: SH2(A), SH3(A), SH4(A)(L) (all but SH5)
  - ARM: sh7372, sh73a0

Drop the "default y" on SH_INTC, make all CPU platforms that use it
select it, and protect all sub-options by "if SH_INTC" to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-22 12:28:16 +09:00
Linus Torvalds
75bcc84445 SH Driver Update for v3.16
* PM Runtime enhancements targeted for use with
   ARM-based Renesas R-Car Gen2 SoCs
 * Restrict INTC_USERIMASK to SH4A as it is only used there
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJTkbZRAAoJENfPZGlqN0++PRMP/A7E8+jBUkYIK/khGQ8obkWs
 FfDsMN+Zgs+en+E99GARJhrBPuRfp+ySrgXPydHwD1f1sYLPDq8IWRXTfM8Ibce3
 hVSLqpWvVR/PoqIryvAbw8iDC/4ENN0cNEja2IWLSzoGXEnK53XSDJTHRIAwEaVg
 6OHPzXTteD/2qFRqC6ALtzS0dNVuImWXSEBui8Wwdt/5Kh6hmqf0hGNsWq1AKgZB
 yxBmEGTAfimy5iNQJc1JmPy5HX05ZLybRsjpwGwUHUfdI5tDdhMDyHTDtFJNB+Y3
 6sPIyWV61Eck7uUwfnDe7CstidMOvqhyOG5rsFlszu5MNZ2er4c9xmg6Tr0SRkFu
 Ck+SMekcqYG+lfOYdXpMpXkE1jQu2F1NhWNeOsdlK6M9OL7j/IcwxZ+mt5XW9qI2
 YLMCE7uatKln6p/CO18CPJqFzQi6sOXbGLKHAKQ0bXragmFdYHWUUDIClV2t2hW9
 CyVG6vSvFpkjwGD1nxB9kTSeXhhPO72Vow6fAD5/45wAoPrVu6Z7yfEj9pd4uYSp
 BQMtbtxGF03epSVe3kCS8qdoj+3Ehqb5rnjTZt5V8malO0VdstWZfFiggrbOCh6D
 3Ol8PcyiKF2QK/jwPSaVpvDs6e1KuuRKekIG9oiFS3MyTQh7rxpHh6YP9sUY19u5
 Qy1gACWjBwf27CTStq2s
 =1JA8
 -----END PGP SIGNATURE-----

Merge tag 'renesas-sh-drivers-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next

Pull SH driver update from Simon Horman:

 - PM Runtime enhancements targeted for use with ARM-based Renesas R-Car
   Gen2 SoCs

 - Restrict INTC_USERIMASK to SH4A as it is only used there

* tag 'renesas-sh-drivers-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  drivers: sh: Enable PM runtime for new R-Car Gen2 SoCs
  drivers: sh: pm_runtime implementation needs to suspend and resume devices
  drivers: sh: Restrict INTC_USERIMASK to SH4A
  drivers: sh: pm_runtime does not need idle callback
2014-06-06 11:44:09 -07:00
Geert Uytterhoeven
2f35fb3c8a drivers: sh: Enable PM runtime for new R-Car Gen2 SoCs
The PM runtime code should also be enabled for:
  - r8a7792 (R-Car V2H)
  - r8a7793 (R-Car M2-N)
  - r8a7794 (R-Car E2)

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-05 09:50:11 +09:00
Linus Torvalds
d09cc3659d Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core irq updates from Thomas Gleixner:
 "The irq department delivers:

   - Another tree wide update to get rid of the horrible create_irq
     interface along with its even more horrible variants.  That also
     gets rid of the last leftovers of the initial sparse irq hackery.
     arch/driver specific changes have been either acked or ignored.

   - A fix for the spurious interrupt detection logic with threaded
     interrupts.

   - A new ARM SoC interrupt controller

   - The usual pile of fixes and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  Documentation: brcmstb-l2: Add Broadcom STB Level-2 interrupt controller binding
  irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller
  genirq: Improve documentation to match current implementation
  ARM: iop13xx: fix msi support with sparse IRQ
  genirq: Provide !SMP stub for irq_set_affinity_notifier()
  irqchip: armada-370-xp: Move the devicetree binding documentation
  irqchip: gic: Use mask field in GICC_IAR
  genirq: Remove dynamic_irq mess
  ia64: Use irq_init_desc
  genirq: Replace dynamic_irq_init/cleanup
  genirq: Remove irq_reserve_irq[s]
  genirq: Replace reserve_irqs in core code
  s390: Avoid call to irq_reserve_irqs()
  s390: Remove pointless arch_show_interrupts()
  s390: pci: Check return value of alloc_irq_desc() proper
  sh: intc: Remove pointless irq_reserve_irqs() invocation
  x86, irq: Remove pointless irq_reserve_irqs() call
  genirq: Make create/destroy_irq() ia64 private
  tile: Use SPARSE_IRQ
  tile: pci: Use irq_alloc/free_hwirq()
  ...
2014-06-04 15:59:13 -07:00
Rafael J. Wysocki
5ece239918 Merge back earlier cpufreq material.
Conflicts:
	arch/mips/loongson/lemote-2f/clock.c
	drivers/cpufreq/intel_pstate.c
2014-06-03 15:03:27 +02:00
Ben Dooks
8255fe1692 drivers: sh: pm_runtime implementation needs to suspend and resume devices
If we override the platform bus calls for pm_runtime then we end up
with the calls to the devices' suspend and resume methods ignored
in favour of the bus ones.

Change to calling the pm_runtime calls to suspend and resume the
devices specifically in the drivers/sh/pm_runtime.c implementation
to allow any device that may want to run power management to do so.

Note, all the current sh driver implementations do not use their
own power management code so this is not a major implementation
issues.

This also brings the implementation into line with the versions
used by the Davinci and Keystone PM domain code, so once fully
tested these implementations could be merged together.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-26 10:45:06 +09:00
Geert Uytterhoeven
39c5abbc54 drivers: sh: Restrict INTC_USERIMASK to SH4A
register_intc_userimask() is called from sh4a code only.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [r8a7779 legacy]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-26 10:45:02 +09:00
Ben Dooks
fe95c932a3 drivers: sh: pm_runtime does not need idle callback
In the runtime_pm idle callback the code assumes that a NULL .runtime_idle
entry is the same as a .runtime_idle entry that returns 0 as a result. This
means the entry in drivers/sh/pm_runtime can be removed in favour of just
leaving the entry NULL.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [r8a7779 legacy]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-26 10:44:54 +09:00
Thomas Gleixner
3670802223 sh: intc: Remove pointless irq_reserve_irqs() invocation
The preceding call to irq_create_identity_mapping() marks the
interrupt as allocated already. Remove the leftover.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Simon Horman <horms@verge.net.au>
Cc: linux-sh@vger.kernel.org
Link: http://lkml.kernel.org/r/20140507154339.189047829@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16 14:05:21 +02:00
Geert Uytterhoeven
3c90c55dcd drivers: sh: compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI
If the kernel is built to support multi-ARM configuration with shmobile
support built in, then drivers/sh is not built. This contains the PM
runtime code in drivers/sh/pm_runtime.c, which implicitly enables the
module clocks for all devices, and thus is quite essential.
Without this, the state of clocks depends on implicit reset state, or on
the bootloader.

If ARCH_SHMOBILE_MULTI then build the drivers/sh directory, but ensure that
bits that may conflict (drivers/sh/clk if the common clock framework is
enabled) or are not used (drivers/sh/intc), are not built.
Also, only enable the PM runtime code when actually running on a shmobile
SoCs that needs it.

ARCH_SHMOBILE_MULTI was added a while ago by commit
efacfce5f8 ("ARM: shmobile: Introduce
ARCH_SHMOBILE_MULTI"), but drivers/sh was compiled for both
ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI until commit
bf98c1eac1 ("ARM: Rename ARCH_SHMOBILE to
ARCH_SHMOBILE_LEGACY").

Inspired by a patch from Ben Dooks <ben.dooks@codethink.co.uk>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-12 16:05:01 +09:00
Stratos Karafotis
4229e1c61a sh: clk: Use cpufreq_for_each_valid_entry macro for iteration
The cpufreq core now supports the cpufreq_for_each_valid_entry macro
helper for iteration over the cpufreq_frequency_table, so use it.

It should have no functional changes.

Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-30 00:07:00 +02:00
Linus Torvalds
d2b150d064 ARM: SoC: sh driver changes
The drivers/sh subdirectory used to get merged through the SH architecture
 tree, but things are in flux there and some of the drivers are shared
 with ARM shmobile, we have picked it up for the time being.
 
 There is only one trivial patch from Laurent Pinchart this time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/2DGCrR//JCVInAQI+oA/9HWu+NqrsTZ8HtBEpol+hQFG7sl0BGKsT
 qCF6PR4Oo/fPmsKlPCtPsHiQHaVk8Ompy/crwyI0ue71/HcZA5+GQ8qCa/aybn1p
 yvL2jSzKHNnNnSoa5844h6mV31+3QQe4C+sD//Ar6dJeZi49l/Xbb4jfRXaavb3h
 tQwCtI1MJ7gqhm4YlBuq9vS0vRJ1igiP2EJMjH3QHKehrmAM1C9ug72kp6+v93Gh
 VTeM7y/hGaIlip/2OgW+I1qTxQNiuBygO+YWE73iFoODcGITlERJiRivw696wzYB
 3Te6suxHAS67tf3s96O0GFQZmfTmKLLwbtJvETCQWY5+aoajU/lLwytbR3duyh67
 hl35qiCh/Oc07TgsrJRWnpll7E0o5rA178pLjlf8C/uw1ok6lAlXqMKh9ZYwEPP1
 joIAhXLMqiC6XggorZpR1TJei6/MUlsaaL0L7bzGBmbMYAfDjeiCpfydtSg/w4bE
 /LpBIop061jQMCANzaERidZgq4RQ3/Fp/xGrZX0ZIkCYoOihT03S4tLLS13rfDM1
 1DDA0/tXvVgPWv9sCRDWeBURtHg8n9QgkGe95I8BWnnRC4A+DkccP1pGzxLC+z/z
 6MQVO+Oo9QQmnyxLzQgQLVTfBay9kLCfNe+9bVfgV0V5f3EA4JBQcU1biT1uBLYw
 culjO8KHdp0=
 =BCkM
 -----END PGP SIGNATURE-----

Merge tag 'sh-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC sh driver change from Arnd Bergmann:
 "The drivers/sh subdirectory used to get merged through the SH
  architecture tree, but things are in flux there and some of the
  drivers are shared with ARM shmobile, we have picked it up for the
  time being.

  There is only one trivial patch from Laurent Pinchart this time"

* tag 'sh-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  sh: intc: Enable driver compilation with COMPILE_TEST
2014-04-05 15:38:41 -07:00
Laurent Pinchart
4f3068f605 sh: intc: Enable driver compilation with COMPILE_TEST
This helps increasing build testing coverage.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-18 09:22:21 +09:00
Guennadi Liakhovetski
a028c6da34 ARM: shmobile: wait for MSTP clock status to toggle, when enabling it
On r-/sh-mobile SoCs MSTP clocks are used by the runtime PM to dynamically
enable and disable peripheral clocks. To make sure the clock has really
started we have to read back its status register until it confirms success.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04 10:22:39 +09:00
Rafael J. Wysocki
e52cff8bdd Merge branch 'pm-assorted'
* pm-assorted:
  PM / QoS: Add pm_qos and dev_pm_qos to events-power.txt
  PM / QoS: Add dev_pm_qos_request tracepoints
  PM / QoS: Add pm_qos_request tracepoints
  PM / QoS: Add pm_qos_update_target/flags tracepoints
  PM / QoS: Update Documentation/power/pm_qos_interface.txt
  PM / Sleep: Print last wakeup source on failed wakeup_count write
  PM / QoS: correct the valid range of pm_qos_class
  PM / wakeup: Adjust messaging for wake events during suspend
  PM / Runtime: Update .runtime_idle() callback documentation
  PM / Runtime: Rework the "runtime idle" helper routine
  PM / Hibernate: print physical addresses consistently with other parts of kernel
2013-06-28 13:01:40 +02:00
Viresh Kumar
5070158804 cpufreq: rename index as driver_data in cpufreq_frequency_table
The "index" field of struct cpufreq_frequency_table was never an
index and isn't used at all by the cpufreq core.  It only is useful
for cpufreq drivers for their internal purposes.

Many people nowadays blindly set it in ascending order with the
assumption that the core will use it, which is a mistake.

Rename it to "driver_data" as that's what its purpose is. All of its
users are updated accordingly.

[rjw: Changelog]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-04 14:25:59 +02:00
Rafael J. Wysocki
45f0a85c82 PM / Runtime: Rework the "runtime idle" helper routine
The "runtime idle" helper routine, rpm_idle(), currently ignores
return values from .runtime_idle() callbacks executed by it.
However, it turns out that many subsystems use
pm_generic_runtime_idle() which checks the return value of the
driver's callback and executes pm_runtime_suspend() for the device
unless that value is not 0.  If that logic is moved to rpm_idle()
instead, pm_generic_runtime_idle() can be dropped and its users
will not need any .runtime_idle() callbacks any more.

Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle()
routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and
ata_port_runtime_idle(), respectively, as well as a few drivers'
ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has
been returned by the .runtime_idle() callback executed by it.

To reduce overall code bloat, make the changes described above.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2013-06-03 21:49:52 +02:00