Commit Graph

491 Commits

Author SHA1 Message Date
Hans de Goede
0434352d3d extcon: int3496: process id-pin first so that we start with the right status
Some other drivers may be waiting for our extcon to show-up, exiting their
probe methods with -EPROBE_DEFER until we show up.

These drivers will typically get the cable state directly after getting
the extcon, this commit changes the int3496 code to wait for the initial
processing of the id-pin to complete before exiting probe() with 0, which
will cause devices waiting on the defered probe to get reprobed.

This fixes a race where the initial work might still be running while other
drivers were already calling extcon_get_state().

Fixes: 2f556bdb9f ("extcon: int3496: Add Intel INT3496 ACPI ... driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-02-14 06:37:33 +09:00
Hans de Goede
d82e233cee Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()"
Redoing the charger type detection to give the usb-role-switch code time
to properly set the role-switch is no good for mainline, since the
usb-role-switch code is not yet in mainline (my bad, sorry).

Also once we've that code there are better ways to fix this which are
not prone to racing as doing a retry after 2 seconds is.

This reverts commit 50082c17bb1455acacd376ae30dff92f2e1addbd.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-02-13 06:49:44 +09:00
Hans de Goede
5b4e64beb6 extcon: axp288: Constify the axp288_pwr_up_down_info array
Make the axp288_pwr_up_down_info array const char * const, this leads
to the following section size changes:

.text     0x674 -> 0x664
.data     0x148 -> 0x0f0
.rodata   0x0b4 -> 0x114

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-02-13 06:49:44 +09:00
Hans de Goede
ca90a64dc6 extcon: axp288: Handle reserved charger-type values better
According to the data sheets all the values not handled in the
switch-case are "reserved". Update the dev_warn message to reflect
this and set the cable-type to EXTCON_CHG_USB_SDP (so max 500mA
current draw) as safe default.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-01-03 10:12:59 +09:00
Hans de Goede
60ed999614 extcon: axp288: Redo charger type detection a couple of seconds after probe()
The axp288 extcon code depends on other drivers to do things like mux the
data lines, enable/disable vbus based on the id-pin, etc.

Sometimes the BIOS has not set these things up correctly resulting in the
initial charger cable type detection giving a wrong result and we end up
not charging or charging at only 0.5A.

This commit starts a second charger-detection cycle a couple of seconds
after the first one finishes, giving the other drivers time to load and
do their thing.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-01-03 10:12:57 +09:00
Chanwoo Choi
d61b814ab9 Merge branch 'ib-extcon-mfd-4.16' into extcon-next 2018-01-03 10:12:07 +09:00
Hans de Goede
9bf317e900 extcon: axp288: Remove unused platform data
This is not used / set anywhere in the tree.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-01-03 10:11:02 +09:00
Hans de Goede
10887fb0db extcon: axp288: Remove unused extcon_nb struct member
Remove the unused extcon_nb struct member.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-01-03 10:11:00 +09:00
Arvind Yadav
01e1429b87 extcon: axp288:: Handle return value of platform_get_irq
platform_get_irq() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-01-03 10:10:51 +09:00
Benson Leung
c7eb47f9e4 extcon: usbc-cros-ec: add support to notify USB type cables.
Extend the driver to notify host and device type cables and the presence
of power.

Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-12-15 17:21:49 +09:00
Arvind Yadav
447641eb88 extcon: adc-jack: Fix platform_get_irq's error checking
The platform_get_irq() function returns negative if an error occurs.
zero or positive number on success. platform_get_irq() error checking
for zero is not correct.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-11-27 10:23:47 +09:00
Markus Elfring
00c2f524b8 extcon: max8997: Delete unneeded initialization in max8997_muic_set_path()
The variable "ret" will be set to an appropriate value a bit later.
Thus this patch omits the explicit initialization at the beginning.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-11-27 10:23:47 +09:00
Markus Elfring
2d18baf6ed extcon: max77693: Delete unneeded initialization in max77693_muic_set_path()
The variable "ret" will be set to an appropriate value a bit later.
Thus this patch omits the explicit initialization at the beginning.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-11-27 10:23:47 +09:00
Linus Torvalds
894025f24b USB/PHY patches for 4.15-rc1
Here is the big set of USB and PHY driver updates for 4.15-rc1.
 
 There is the usual amount of gadget and xhci driver updates, along with
 phy and chipidea enhancements.  There's also a lot of SPDX tags and
 license boilerplate cleanups as well, which provide some churn in the
 diffstat.
 
 Other major thing is the typec code that moved out of staging and into
 the "real" part of the drivers/usb/ tree, which was nice to see happen.
 
 All of these have been in linux-next with no reported issues for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgm/Vw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yktXwCdGgpInfOEvOGFd83EPDL7a1ncyc4AoM5wI8yl
 1CeLipqVIN3IsMMJptvb
 =zvDI
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver updates for 4.15-rc1.

  There is the usual amount of gadget and xhci driver updates, along
  with phy and chipidea enhancements. There's also a lot of SPDX tags
  and license boilerplate cleanups as well, which provide some churn in
  the diffstat.

  Other major thing is the typec code that moved out of staging and into
  the "real" part of the drivers/usb/ tree, which was nice to see
  happen.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
  USB: usbfs: compute urb->actual_length for isochronous
  usb: core: message: remember to reset 'ret' to 0 when necessary
  USB: typec: Remove remaining redundant license text
  USB: typec: add SPDX identifiers to some files
  USB: renesas_usbhs: rcar?.h: add SPDX tags
  USB: chipidea: ci_hdrc_tegra.c: add SPDX line
  USB: host: xhci-debugfs: add SPDX lines
  USB: add SPDX identifiers to all remaining Makefiles
  usb: host: isp1362-hcd: remove a couple of redundant assignments
  USB: adutux: remove redundant variable minor
  usb: core: add a new usb_get_ptm_status() helper
  usb: core: add a 'type' parameter to usb_get_status()
  usb: core: introduce a new usb_get_std_status() helper
  usb: core: rename usb_get_status() 'type' argument to 'recip'
  usb: core: add Status Type definitions
  USB: gadget: Remove redundant license text
  USB: gadget: function: Remove redundant license text
  USB: gadget: udc: Remove redundant license text
  USB: gadget: legacy: Remove redundant license text
  ...
2017-11-13 21:14:07 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Marek Szyprowski
4a4a87146a extcon: max77843: Add support for SmartDock accessory
SmartDock uses ADC_RESERVED_ACC_3 (0x10) ADC ID type and provides following
features:
1. USB host with embedded USB hub (2-4 ports) for mice, keyboard, etc,
2. MHL for video output,
3. charging.

Tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-24 09:48:54 +09:00
Marek Szyprowski
7b9651103b extcon: max77843: Add OTG power control to the MUIC driver
Enabling power on VBUS micro-usb pin is required only when passive OTG
cable is connected. Initially OTG VBUS power control was planned to be
done in charger driver. However such information is not really available
from the extcon notifications, so VBUS power control has to be done
directly in MUIC driver, which has all information about the attached
accessory.

For example SmartDock is externally powered accessory, provides OTG
(USB HOST) functionality and use VBUS pin for charging a device battery,
so the VBUS charging pump should be disabled in such case.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-24 09:48:40 +09:00
Markus Elfring
b743483bd4 extcon: max14577: Delete an unnecessary variable initialisation in max14577_muic_set_path()
The variable "ret" is immediately reassigned by a following statement.
Thus omit the explicit initialisation at the beginning.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-23 14:10:26 +09:00
Colin Ian King
5183240cde extcon: make extcon_info static const, fixes warning
The array extcon_info is read only, local to the source and does not
need to be in global scope, so make it static const.

Cleans up sparse warning:
symbol 'extcon_info' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-23 14:10:25 +09:00
Chanwoo Choi
176aa36012 extcon: Split out extcon header file for consumer and provider device
The extcon has two type of extcon devices as following.
- 'extcon provider deivce' adds new extcon device and detect the
   state/properties of external connector. Also, it notifies the
   state/properties to the extcon consumer device.
- 'extcon consumer device' gets the change state/properties
   from extcon provider device.
Prior to that, include/linux/extcon.h contains all exported API for
both provider and consumer device driver. To clarify the meaning of
header file and to remove the wrong use-case on consumer device,
this patch separates into extcon.h and extcon-provider.h.

[Description for include/linux/{extcon.h|extcon-provider.h}]
- extcon.h includes the extcon API and data structure for extcon consumer
  device driver. This header file contains the following APIs:
  : Register/unregister the notifier to catch the change of extcon device
  : Get the extcon device instance
  : Get the extcon device name
  : Get the state of each external connector
  : Get the property value of each external connector
  : Get the property capability of each external connector

- extcon-provider.h includes the extcon API and data structure for extcon
  provider device driver. This header file contains the following APIs:
  : Include 'include/linux/extcon.h'
  : Allocate the memory for extcon device instance
  : Register/unregister extcon device
  : Set the state of each external connector
  : Set the property value of each external connector
  : Set the property capability of each external connector

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23 14:07:58 +09:00
Maciej Purski
4243c408f7 extcon: max77693: Allow MHL attach notifier
Without this patch extcon couldn't notify attaching MHL cable.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-08-25 09:32:27 +09:00
Chanwoo Choi
6ab6094f37 extcon: Correct description to improve the readability
The extcon files explains the detailed operation for functions and
what is meaning of extcon structure. There are different explanation
even if the same argument.

So, it modifies the description for both functions and structures
in order to improve the readability and guide the role of functions
more well.

Also, this patch fixes the mismatching license info as a GPL v2
and removes the inactive author information.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-08-16 09:27:55 +09:00
Chanwoo Choi
dd4ed69a0e extcon: Remove unused CABLE_NAME_MAX definition
This patch removes the unused CABLE_NAME_MAX definition.

Signed-off-by: Chanwoo Choi <cwchoi00@gmail.com>
2017-08-16 09:27:55 +09:00
Christophe JAILLET
1cf76c4eeb extcon: cros-ec: Fix a potential NULL pointer dereference
Return -ENOMEM in case of memory allocation failure. This avoids a NULL
pointer dereference.

Fixes: c698316661 ("extcon: cros-ec: Add extcon-cros-ec driver to support display out")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-08-07 15:34:20 +09:00
Rob Herring
5c27036d2b extcon: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-07-19 10:37:10 +09:00
Chanwoo Choi
15dec834a0 Merge remote-tracking branch 'origin/ib-extcon-mfd-4.14' into extcon-next 2017-07-17 19:26:30 +09:00
Benson Leung
c698316661 extcon: cros-ec: Add extcon-cros-ec driver to support display out
This is the driver for the USB Type C cable detection mechanism
built into the ChromeOS Embedded Controller on systems that
have USB Type-C ports.

At present, this allows for the presence of display out, but in
future, it may also be used to notify host and device type cables
and the presence of power.

Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Chanwoo Choi <cw00.chio@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-07-17 19:25:49 +09:00
Arvind Yadav
ff890bc008 extcon: int3496: Constify acpi_device_id
acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   1733	    352	      0	   2085	    825 drivers/extcon/extcon-intel-int3496.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   1797	    272	      0	   2069	    815 drivers/extcon/extcon-intel-int3496.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-07-16 15:09:30 +09:00
Andy Shevchenko
1f4be24786 extcon: int3496: Switch to devm_acpi_dev_add_driver_gpios()
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify
error path and fix potentially wrong assingment if ->probe() fails.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-06-12 10:00:24 +09:00
Peter Robinson
a781a7d646 extcon: qcom-spmi-misc: add dependency on ARCH_QCOM
Depend on the architecture the device actuall is in, also add
dep on the compile test to ensure continued coverage.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-05-23 18:35:42 +09:00
Markus Elfring
cf5459a9e2 extcon: arizona: Use devm_kcalloc() in arizona_extcon_get_micd_configs()
* A multiplication for the size determination of a memory allocation
  indicated that an array data structure should be processed.
  Thus use the corresponding function "devm_kcalloc".

* Replace the specification of a data structure by a pointer dereference
  to make the corresponding size determination a bit safer according to
  the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-05-23 18:32:03 +09:00
Markus Elfring
826a47e978 extcon: Fix a typo in three comment lines
Adjust three words in this description for a function.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-05-23 18:32:02 +09:00
Markus Elfring
3f5071a8b0 extcon: Use devm_kcalloc() in extcon_dev_register()
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-05-23 18:32:02 +09:00
Chanwoo Choi
70641a0a84 extcon: Use BIT() macro for the left-shift operation
This patch just uses the BIT() macro to make the code simple.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 11:12:45 +09:00
Hans de Goede
c42a880c31 extcon: intel-cht-wc: Ignore failure to detect charger-type on host mode exit
When we leave host-mode because the id-pin is no longer connected to
ground, the 5v boost converter is normally still on, so we will see
Vbus, but it is not from a charger (normally) so the charger-type
detection will fail.

This commit silences the cht_wc_extcon_get_charger() false-positive
errors when we're leaving host mode.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:26 +09:00
Hans de Goede
585cb239f4 extcon: intel-cht-wc: Disable external 5v boost converter on probe
Disable the 5v boost converter on probe in case it was left on by
the BIOS, this fixes 2 problems:

1) This gets seen by the external battery charger as a valid Vbus
   supply and it then tries to feed Vsys from this creating a
   feedback loop which causes aprox. 300 mA extra battery drain
   (and unless we drive the external-charger-disable pin high it
   also tries to charge the battery causing even more feedback).
2) This gets seen by the pwrsrc block as a SDP USB Vbus supply

Since the external battery charger has its own 5v boost converter
which does not have these issues, we simply turn the separate
external 5v boost converter off and leave it off entirely.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:25 +09:00
Chanwoo Choi
c9d0f1d121 extcon: Remove porting compatibility of swich class
This patch removes the porting compatibility for switch class
because there is no any usage and requirement of swich class
over a couple of years.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:24 +09:00
Hans de Goede
db0f3baaa3 extcon: intel-cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
Add a driver for charger detection / control on the Intel Cherrytrail
Whiskey Cove PMIC.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:23 +09:00
Roger Quadros
01944321de extcon: palmas: Don't miss GPIO events during suspend/resume
The USB cable state can change during suspend/resume
so be sure to check and update the extcon state.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:22 +09:00
Roger Quadros
8680b4d193 extcon: usb-gpio: Don't miss event during suspend/resume
We must check for ID/VBUS changes during resume irrespective
of whether our device wakeup is enabled or not.

Without this we seem to be missing ID/VBUS events after
system suspend/resume.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:21 +09:00
Peter Chen
98fd079297 extcon: usb-gpio: Do not enable USB as wakeup source by default
Whether the USB port as a wakeup source should be determined by user,
but not enabled by default.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:20 +09:00
Charles Keepax
e57bb43c7e extcon: arizona: Wait for any running HPDETs to complete on jack removal
As the HPDET can't be aborted mid way through we should not allow any new
insertion to be processed until the previous HPDET has finished. It is very
unlikely but with low enough debounce settings you could start a new HPDET
before the old one has completed, which results in an erroneous reading.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:19 +09:00
Chanwoo Choi
bc9a5c37a5 Merge branch 'ib-extcon-4.12' into HEAD 2017-04-06 10:54:36 +09:00
Chanwoo Choi
815429b39d extcon: Add new extcon_register_notifier_all() to monitor all external connectors
The extcon core already provides the extcon_register_notifier() function
in order to register the notifier block which is used to monitor
the state change for the specific external connector such as EXTCON_USB,
EXTCON_USB_HOST and so on. The extcon consumer uses the this function.

The extcon consumer might need to monitor the all supported external
connectors from the extcon device. In this case, The extcon consumer
should have each notifier_block structure for each external connector.

This patch adds the new extcon_register_notifier_all() function
that extcon consumer is able to monitor the state change of all
supported external connectors by using only one notifier_block structure.

- List of new added functions:
int extcon_register_notifier_all(struct extcon_dev *edev,
			struct notifier_block *nb);
int extcon_unregister_notifier_all(struct extcon_dev *edev,
			struct notifier_block *nb);
int devm_extcon_register_notifier_all(struct device *dev,
			struct extcon_dev *edev, struct notifier_block *nb);
void devm_extcon_unregister_notifier_all(struct device *dev,
			struct extcon_dev *edev, struct notifier_block *nb);

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2017-04-04 11:22:42 +09:00
Andy Shevchenko
366380cd62 Revert "extcon: usb-gpio: add support for ACPI gpio interface"
The commit 942c7924a5 introduced a check for ACPI handle for the
device that never appears on any ACPI-enabled platform so far. It seems
a confusion with extcon-intel-int3496 which does support ACPI-enabled
platforms.

Revert commit 942c7924a5 to avoid any confusion in the future.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-27 13:17:41 +09:00
Hans de Goede
70216fd937 extcon: int3496: Set the id pin to direction-input if necessary
With the new more strict ACPI gpio code the dsdt's IoRestriction
flags are honored on gpiod_get, but in some dsdt's it is wrong,
so explicitly call gpiod_direction_input on the id gpio if
necessary.

This fixes the following errors when the int3496 code is used
together with the new more strict ACPI gpio code:

[ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ
[ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio
[ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22
[ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22 18:29:48 +09:00
Hans de Goede
408c5b41d2 extcon: int3496: Use gpiod_get instead of gpiod_get_index
Now that we've an acpi mapping table we should be using gpiod_get
instead of gpiod_get_index.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22 18:29:47 +09:00
Peter Robinson
059c7874b8 extcon: int3496: Add dependency on X86 as it's Intel specific
Add dependency on X86 so it doesn't show up on other arches and
add a option for compile test so it still gets build coverage.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22 18:29:46 +09:00
Andy Shevchenko
8cb2cbae45 extcon: int3496: Add GPIO ACPI mapping table
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.

Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22 18:29:46 +09:00
Andy Shevchenko
90400c5884 extcon: int3496: Rename GPIO pins in accordance with binding
Update GPIO pin names in extcon-intel-int3496.c driver to follow
the existing extcon binding.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22 18:29:45 +09:00