Commit Graph

45 Commits

Author SHA1 Message Date
Sagi Grimberg
2ec74c3ef2 mm: move all mmu notifier invocations to be done outside the PT lock
In order to allow sleeping during mmu notifier calls, we need to avoid
invoking them under the page table spinlock.  This patch solves the
problem by calling invalidate_page notification after releasing the lock
(but before freeing the page itself), or by wrapping the page invalidation
with calls to invalidate_range_begin and invalidate_range_end.

To prevent accidental changes to the invalidate_range_end arguments after
the call to invalidate_range_begin, the patch introduces a convention of
saving the arguments in consistently named locals:

	unsigned long mmun_start;	/* For mmu_notifiers */
	unsigned long mmun_end;	/* For mmu_notifiers */

	...

	mmun_start = ...
	mmun_end = ...
	mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);

	...

	mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);

The patch changes code to use this convention for all calls to
mmu_notifier_invalidate_range_start/end, except those where the calls are
close enough so that anyone who glances at the code can see the values
aren't changing.

This patchset is a preliminary step towards on-demand paging design to be
added to the RDMA stack.

Why do we want on-demand paging for Infiniband?

  Applications register memory with an RDMA adapter using system calls,
  and subsequently post IO operations that refer to the corresponding
  virtual addresses directly to HW.  Until now, this was achieved by
  pinning the memory during the registration calls.  The goal of on demand
  paging is to avoid pinning the pages of registered memory regions (MRs).
   This will allow users the same flexibility they get when swapping any
  other part of their processes address spaces.  Instead of requiring the
  entire MR to fit in physical memory, we can allow the MR to be larger,
  and only fit the current working set in physical memory.

Why should anyone care?  What problems are users currently experiencing?

  This can make programming with RDMA much simpler.  Today, developers
  that are working with more data than their RAM can hold need either to
  deregister and reregister memory regions throughout their process's
  life, or keep a single memory region and copy the data to it.  On demand
  paging will allow these developers to register a single MR at the
  beginning of their process's life, and let the operating system manage
  which pages needs to be fetched at a given time.  In the future, we
  might be able to provide a single memory access key for each process
  that would provide the entire process's address as one large memory
  region, and the developers wouldn't need to register memory regions at
  all.

Is there any prospect that any other subsystems will utilise these
infrastructural changes?  If so, which and how, etc?

  As for other subsystems, I understand that XPMEM wanted to sleep in
  MMU notifiers, as Christoph Lameter wrote at
  http://lkml.indiana.edu/hypermail/linux/kernel/0802.1/0460.html and
  perhaps Andrea knows about other use cases.

  Scheduling in mmu notifications is required since we need to sync the
  hardware with the secondary page tables change.  A TLB flush of an IO
  device is inherently slower than a CPU TLB flush, so our design works by
  sending the invalidation request to the device, and waiting for an
  interrupt before exiting the mmu notifier handler.

Avi said:

  kvm may be a buyer.  kvm::mmu_lock, which serializes guest page
  faults, also protects long operations such as destroying large ranges.
  It would be good to convert it into a spinlock, but as it is used inside
  mmu notifiers, this cannot be done.

  (there are alternatives, such as keeping the spinlock and using a
  generation counter to do the teardown in O(1), which is what the "may"
  is doing up there).

[akpm@linux-foundation.orgpossible speed tweak in hugetlb_cow(), cleanups]
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Liran Liss <liranl@mellanox.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:58 +09:00
Michel Lespinasse
6b2dbba8b6 mm: replace vma prio_tree with an interval tree
Implement an interval tree as a replacement for the VMA prio_tree.  The
algorithms are similar to lib/interval_tree.c; however that code can't be
directly reused as the interval endpoints are not explicitly stored in the
VMA.  So instead, the common algorithm is moved into a template and the
details (node type, how to get interval endpoints from the node, etc) are
filled in using the C preprocessor.

Once the interval tree functions are available, using them as a
replacement to the VMA prio tree is a relatively simple, mechanical job.

Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:39 +09:00
Konstantin Khlebnikov
0b173bc4da mm: kill vma flag VM_CAN_NONLINEAR
Move actual pte filling for non-linear file mappings into the new special
vma operation: ->remap_pages().

Filesystems must implement this method to get non-linear mapping support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.

Now device drivers can implement this method and obtain nonlinear vma support.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>	#arch/tile
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:17 +09:00
Jan Kara
14da920014 fs: Protect write paths by sb_start_write - sb_end_write
There are several entry points which dirty pages in a filesystem.  mmap
(handled by block_page_mkwrite()), buffered write (handled by
__generic_file_aio_write()), splice write (generic_file_splice_write),
truncate, and fallocate (these can dirty last partial page - handled inside
each filesystem separately). Protect these places with sb_start_write() and
sb_end_write().

->page_mkwrite() calls are particularly complex since they are called with
mmap_sem held and thus we cannot use standard sb_start_write() due to lock
ordering constraints. We solve the problem by using a special freeze protection
sb_start_pagefault() which ranks below mmap_sem.

BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31 09:45:47 +04:00
Jan Kara
4fcf1c6205 mm: Make default vm_ops provide ->page_mkwrite handler
Make default vm_ops provide ->page_mkwrite handler. Currently it only updates
file's modification times and gets locked page but later it will also handle
filesystem freezing.

BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31 01:02:48 +04:00
Josef Bacik
c3b2da3148 fs: introduce inode operation ->update_time
Btrfs has to make sure we have space to allocate new blocks in order to modify
the inode, so updating time can fail.  We've gotten around this by having our
own file_update_time but this is kind of a pain, and Christoph has indicated he
would like to make xfs do something different with atime updates.  So introduce
->update_time, where we will deal with i_version an a/m/c time updates and
indicate which changes need to be made.  The normal version just does what it
has always done, updates the time and marks the inode dirty, and then
filesystems can choose to do something different.

I've gone through all of the users of file_update_time and made them check for
errors with the exception of the fault code since it's complicated and I wasn't
quite sure what to do there, also Jan is going to be pushing the file time
updates into page_mkwrite for those who have it so that should satisfy btrfs and
make it not a big deal to check the file_update_time() return code in the
generic fault path. Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-01 12:07:25 -04:00
Carsten Otte
99f02ef1f1 mm/filemap_xip.c: fix race condition in xip_file_fault()
Fix a race condition that shows in conjunction with xip_file_fault() when
two threads of the same user process fault on the same memory page.

In this case, the race winner will install the page table entry and the
unlucky loser will cause an oops: xip_file_fault calls vm_insert_pfn (via
vm_insert_mixed) which drops out at this check:

	retval = -EBUSY;
	if (!pte_none(*pte))
		goto out_unlock;

The resulting -EBUSY return value will trigger a BUG_ON() in
xip_file_fault.

This fix simply considers the fault as fixed in this case, because the
race winner has successfully installed the pte.

[akpm@linux-foundation.org: use conventional (and consistent) comment layout]
Reported-by: David Sadler <dsadler@us.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reported-by: Louis Alex Eisner <leisner@cs.ucsd.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-03 16:16:41 -08:00
Paul Gortmaker
b95f1b31b7 mm: Map most files to use export.h instead of module.h
The files changed within are only using the EXPORT_SYMBOL
macro variants.  They are not using core modular infrastructure
and hence don't need module.h but only the export.h header.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Peter Zijlstra
3d48ae45e7 mm: Convert i_mmap_lock to a mutex
Straightforward conversion of i_mmap_lock to a mutex.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:18 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
KAMEZAWA Hiroyuki
d559db086f mm: clean up mm_counter
Presently, per-mm statistics counter is defined by macro in sched.h

This patch modifies it to
  - defined in mm.h as inlinf functions
  - use array instead of macro's name creation.

This patch is for reducing patch size in future patch to modify
implementation of per-mm counter.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:23 -08:00
Alexey Dobriyan
f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Martin Schwidefsky
58984ce21d mm: do_xip_mapping_read: fix length calculation
The calculation of the value nr in do_xip_mapping_read is incorrect.  If
the copy required more than one iteration in the do while loop the copies
variable will be non-zero.  The maximum length that may be passed to the
call to copy_to_user(buf+copied, xip_mem+offset, nr) is len-copied but the
check only compares against (nr > len).

This bug is the cause for the heap corruption Carsten has been chasing
for so long:

*** glibc detected *** /bin/bash: free(): invalid next size (normal): 0x00000000800e39f0 ***
======= Backtrace: =========
/lib64/libc.so.6[0x200000b9b44]
/lib64/libc.so.6(cfree+0x8e)[0x200000bdade]
/bin/bash(free_buffered_stream+0x32)[0x80050e4e]
/bin/bash(close_buffered_stream+0x1c)[0x80050ea4]
/bin/bash(unset_bash_input+0x2a)[0x8001c366]
/bin/bash(make_child+0x1d4)[0x8004115c]
/bin/bash[0x8002fc3c]
/bin/bash(execute_command_internal+0x656)[0x8003048e]
/bin/bash(execute_command+0x5e)[0x80031e1e]
/bin/bash(execute_command_internal+0x79a)[0x800305d2]
/bin/bash(execute_command+0x5e)[0x80031e1e]
/bin/bash(reader_loop+0x270)[0x8001efe0]
/bin/bash(main+0x1328)[0x8001e960]
/lib64/libc.so.6(__libc_start_main+0x100)[0x200000592a8]
/bin/bash(clearerr+0x5e)[0x8001c092]

With this bug fix the commit 0e4a9b5928
"ext2/xip: refuse to change xip flag during remount with busy inodes" can
be removed again.

Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:49 -07:00
Hugh Dickins
edc315fd22 badpage: remove vma from page_remove_rmap
Remove page_remove_rmap()'s vma arg, which was only for the Eeek message.
And remove the BUG_ON(page_mapcount(page) == 0) from CONFIG_DEBUG_VM's
page_dup_rmap(): we're trying to be more resilient about that than BUGs.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:07 -08:00
Nick Piggin
14bac5acfd mm: xip/ext2 fix block allocation race
XIP can call into get_xip_mem concurrently with the same file,offset with
create=1.  This usually maps down to get_block, which expects the page
lock to prevent such a situation.  This causes ext2 to explode for one
reason or another.

Serialise those calls for the moment.  For common usages today, I suspect
get_xip_mem rarely is called to create new blocks.  In future as XIP
technologies evolve we might need to look at which operations require
scalability, and rework the locking to suit.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jared Hulbert <jaredeh@gmail.com>
Acked-by: Carsten Otte <cotte@freenet.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20 15:40:32 -07:00
Nick Piggin
538f8ea6c8 mm: xip fix fault vs sparse page invalidate race
XIP has a race between sparse pages being inserted into page tables, and
sparse pages being zapped when its time to put a non-sparse page in.

What can happen is that a process can be left with a dangling sparse page
in a MAP_SHARED mapping, while the rest of the world sees the non-sparse
version.  Ie.  data corruption.

Guard these operations with a seqlock, making fault-in-sparse-pages the
slowpath, and try-to-unmap-sparse-pages the fastpath.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jared Hulbert <jaredeh@gmail.com>
Acked-by: Carsten Otte <cotte@freenet.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20 15:40:32 -07:00
Nick Piggin
479db0bf40 mm: dirty page tracking race fix
There is a race with dirty page accounting where a page may not properly
be accounted for.

clear_page_dirty_for_io() calls page_mkclean; then TestClearPageDirty.

page_mkclean walks the rmaps for that page, and for each one it cleans and
write protects the pte if it was dirty.  It uses page_check_address to
find the pte.  That function has a shortcut to avoid the ptl if the pte is
not present.  Unfortunately, the pte can be switched to not-present then
back to present by other code while holding the page table lock -- this
should not be a signal for page_mkclean to ignore that pte, because it may
be dirty.

For example, powerpc64's set_pte_at will clear a previously present pte
before setting it to the desired value.  There may also be other code in
core mm or in arch which do similar things.

The consequence of the bug is loss of data integrity due to msync, and
loss of dirty page accounting accuracy.  XIP's __xip_unmap could easily
also be unreliable (depending on the exact XIP locking scheme), which can
lead to data corruption.

Fix this by having an option to always take ptl to check the pte in
page_check_address.

It's possible to retain this optimization for page_referenced and
try_to_unmap.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Carsten Otte <cotte@freenet.de>
Cc: Hugh Dickins <hugh@veritas.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20 15:40:32 -07:00
Andrea Arcangeli
cddb8a5c14 mmu-notifiers: core
With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages.
 There are secondary MMUs (with secondary sptes and secondary tlbs) too.
sptes in the kvm case are shadow pagetables, but when I say spte in
mmu-notifier context, I mean "secondary pte".  In GRU case there's no
actual secondary pte and there's only a secondary tlb because the GRU
secondary MMU has no knowledge about sptes and every secondary tlb miss
event in the MMU always generates a page fault that has to be resolved by
the CPU (this is not the case of KVM where the a secondary tlb miss will
walk sptes in hardware and it will refill the secondary tlb transparently
to software if the corresponding spte is present).  The same way
zap_page_range has to invalidate the pte before freeing the page, the spte
(and secondary tlb) must also be invalidated before any page is freed and
reused.

Currently we take a page_count pin on every page mapped by sptes, but that
means the pages can't be swapped whenever they're mapped by any spte
because they're part of the guest working set.  Furthermore a spte unmap
event can immediately lead to a page to be freed when the pin is released
(so requiring the same complex and relatively slow tlb_gather smp safe
logic we have in zap_page_range and that can be avoided completely if the
spte unmap event doesn't require an unpin of the page previously mapped in
the secondary MMU).

The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know
when the VM is swapping or freeing or doing anything on the primary MMU so
that the secondary MMU code can drop sptes before the pages are freed,
avoiding all page pinning and allowing 100% reliable swapping of guest
physical address space.  Furthermore it avoids the code that teardown the
mappings of the secondary MMU, to implement a logic like tlb_gather in
zap_page_range that would require many IPI to flush other cpu tlbs, for
each fixed number of spte unmapped.

To make an example: if what happens on the primary MMU is a protection
downgrade (from writeable to wrprotect) the secondary MMU mappings will be
invalidated, and the next secondary-mmu-page-fault will call
get_user_pages and trigger a do_wp_page through get_user_pages if it
called get_user_pages with write=1, and it'll re-establishing an updated
spte or secondary-tlb-mapping on the copied page.  Or it will setup a
readonly spte or readonly tlb mapping if it's a guest-read, if it calls
get_user_pages with write=0.  This is just an example.

This allows to map any page pointed by any pte (and in turn visible in the
primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an
full MMU with both sptes and secondary-tlb like the shadow-pagetable layer
with kvm), or a remote DMA in software like XPMEM (hence needing of
schedule in XPMEM code to send the invalidate to the remote node, while no
need to schedule in kvm/gru as it's an immediate event like invalidating
primary-mmu pte).

At least for KVM without this patch it's impossible to swap guests
reliably.  And having this feature and removing the page pin allows
several other optimizations that simplify life considerably.

Dependencies:

1) mm_take_all_locks() to register the mmu notifier when the whole VM
   isn't doing anything with "mm".  This allows mmu notifier users to keep
   track if the VM is in the middle of the invalidate_range_begin/end
   critical section with an atomic counter incraese in range_begin and
   decreased in range_end.  No secondary MMU page fault is allowed to map
   any spte or secondary tlb reference, while the VM is in the middle of
   range_begin/end as any page returned by get_user_pages in that critical
   section could later immediately be freed without any further
   ->invalidate_page notification (invalidate_range_begin/end works on
   ranges and ->invalidate_page isn't called immediately before freeing
   the page).  To stop all page freeing and pagetable overwrites the
   mmap_sem must be taken in write mode and all other anon_vma/i_mmap
   locks must be taken too.

2) It'd be a waste to add branches in the VM if nobody could possibly
   run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if
   CONFIG_KVM=m/y.  In the current kernel kvm won't yet take advantage of
   mmu notifiers, but this already allows to compile a KVM external module
   against a kernel with mmu notifiers enabled and from the next pull from
   kvm.git we'll start using them.  And GRU/XPMEM will also be able to
   continue the development by enabling KVM=m in their config, until they
   submit all GRU/XPMEM GPLv2 code to the mainline kernel.  Then they can
   also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n).
   This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM
   are all =n.

The mmu_notifier_register call can fail because mm_take_all_locks may be
interrupted by a signal and return -EINTR.  Because mmu_notifier_reigster
is used when a driver startup, a failure can be gracefully handled.  Here
an example of the change applied to kvm to register the mmu notifiers.
Usually when a driver startups other allocations are required anyway and
-ENOMEM failure paths exists already.

 struct  kvm *kvm_arch_create_vm(void)
 {
        struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL);
+       int err;

        if (!kvm)
                return ERR_PTR(-ENOMEM);

        INIT_LIST_HEAD(&kvm->arch.active_mmu_pages);

+       kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops;
+       err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm);
+       if (err) {
+               kfree(kvm);
+               return ERR_PTR(err);
+       }
+
        return kvm;
 }

mmu_notifier_unregister returns void and it's reliable.

The patch also adds a few needed but missing includes that would prevent
kernel to compile after these changes on non-x86 archs (x86 didn't need
them by luck).

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix mm/filemap_xip.c build]
[akpm@linux-foundation.org: fix mm/mmu_notifier.c build]
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Kanoj Sarcar <kanojsarcar@yahoo.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Chris Wright <chrisw@redhat.com>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Izik Eidus <izike@qumranet.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 16:30:21 -07:00
Miklos Szeredi
2f1936b877 [patch 3/5] vfs: change remove_suid() to file_remove_suid()
All calls to remove_suid() are made with a file pointer, because
(similarly to file_update_time) it is called when the file is written.

Clean up callers by passing in a file instead of a dentry.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-07-26 20:53:16 -04:00
Nick Piggin
70688e4dd1 xip: support non-struct page backed memory
Convert XIP to support non-struct page backed memory, using VM_MIXEDMAP for
the user mappings.

This requires the get_xip_page API to be changed to an address based one.
Improve the API layering a little bit too, while we're here.

This is required in order to support XIP filesystems on memory that isn't
backed with struct page (but memory with struct page is still supported too).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:23 -07:00
Jan Kara
2004dc8eec Use pgoff_t instead of unsigned long
Convert variables containing page indexes to pgoff_t.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:32 -08:00
Christoph Lameter
eebd2aa355 Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user
Simplify page cache zeroing of segments of pages through 3 functions

zero_user_segments(page, start1, end1, start2, end2)

        Zeros two segments of the page. It takes the position where to
        start and end the zeroing which avoids length calculations and
	makes code clearer.

zero_user_segment(page, start, end)

        Same for a single segment.

zero_user(page, start, length)

        Length variant for the case where we know the length.

We remove the zero_user_page macro. Issues:

1. Its a macro. Inline functions are preferable.

2. The KM_USER0 macro is only defined for HIGHMEM.

   Having to treat this special case everywhere makes the
   code needlessly complex. The parameter for zeroing is always
   KM_USER0 except in one single case that we open code.

Avoiding KM_USER0 makes a lot of code not having to be dealing
with the special casing for HIGHMEM anymore. Dealing with
kmap is only necessary for HIGHMEM configurations. In those
configurations we use KM_USER0 like we do for a series of other
functions defined in highmem.h.

Since KM_USER0 is depends on HIGHMEM the existing zero_user_page
function could not be a macro. zero_user_* functions introduced
here can be be inline because that constant is not used when these
functions are called.

Also extract the flushing of the caches to be outside of the kmap.

[akpm@linux-foundation.org: fix nfs and ntfs build]
[akpm@linux-foundation.org: fix ntfs build some more]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:13 -08:00
Akinobu Mita
c51b1a160b xip: fix get_zeroed_page with __GFP_HIGHMEM
The use of get_zeroed_page() with __GFP_HIGHMEM is invalid.  Use
alloc_page() with __GFP_ZERO instead of invalid get_zeroed_page().

(This patch is only compile tested)

Cc: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-08 16:10:36 -08:00
Nick Piggin
369b8f5a70 mm: fix XIP file writes
Writing to XIP files at a non-page-aligned offset results in data corruption
because the writes were always sent to the start of the page.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:21:20 -08:00
Nick Piggin
4a9e5ef1f4 mm: write iovec cleanup
Hide some of the open-coded nr_segs tests into the iovec helpers.  This is all
to simplify generic_file_buffered_write, because that gets more complex in the
next patch.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:54 -07:00
Nick Piggin
83c54070ee mm: fault feedback #2
This patch completes Linus's wish that the fault return codes be made into
bit flags, which I agree makes everything nicer.  This requires requires
all handle_mm_fault callers to be modified (possibly the modifications
should go further and do things like fault accounting in handle_mm_fault --
however that would be for another patch).

[akpm@linux-foundation.org: fix alpha build]
[akpm@linux-foundation.org: fix s390 build]
[akpm@linux-foundation.org: fix sparc build]
[akpm@linux-foundation.org: fix sparc64 build]
[akpm@linux-foundation.org: fix ia64 build]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Still apparently needs some ARM and PPC loving - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin
d0217ac04c mm: fault feedback #1
Change ->fault prototype.  We now return an int, which contains
VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
 FAULT_RET_ code tells the VM whether a page was found, whether it has been
locked, and potentially other things.  This is not quite the way he wanted
it yet, but that's changed in the next patch (which requires changes to
arch code).

This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
that a page is locked which requires filemap_nopage to go away (because we
can no longer remain backward compatible without that flag), but we were
going to do that anyway.

struct fault_data is renamed to struct vm_fault as Linus asked. address
is now a void __user * that we should firmly encourage drivers not to use
without really good reason.

The page is now returned via a page pointer in the vm_fault struct.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin
54cb8821de mm: merge populate and nopage into fault (fixes nonlinear)
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
the virtual address -> file offset differently from linear mappings.

->populate is a layering violation because the filesystem/pagecache code
should need to know anything about the virtual memory mapping.  The hitch here
is that the ->nopage handler didn't pass down enough information (ie.  pgoff).
 But it is more logical to pass pgoff rather than have the ->nopage function
calculate it itself anyway (because that's a similar layering violation).

Having the populate handler install the pte itself is likewise a nasty thing
to be doing.

This patch introduces a new fault handler that replaces ->nopage and
->populate and (later) ->nopfn.  Most of the old mechanism is still in place
so there is a lot of duplication and nice cleanups that can be removed if
everyone switches over.

The rationale for doing this in the first place is that nonlinear mappings are
subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
to duplicate the synchronisation logic rather than just consolidate the two.

After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
pagecache.  Seems like a fringe functionality anyway.

NOPAGE_REFAULT is removed.  This should be implemented with ->fault, and no
users have hit mainline yet.

[akpm@linux-foundation.org: cleanup]
[randy.dunlap@oracle.com: doc. fixes for readahead]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Carsten Otte
d054fe3d10 xip sendfile removal
This patch removes xip_file_sendfile, the sendfile implementation for
xip without replacement. Those customers that use xip on s390 are not
using sendfile() as far as we know, and so far s390 is the only platform
this could potentially be used on so far.
Having sendfile is not a popular feature for execute in place file
systems, however we have a working implementation of splice_read() based
on fs/splice.c if anyone asks for it.
At this point in time, it does not seem preferable to merge
splice_read() for xip because it causes extra maintenence effort due to
code duplication and it requires struct page behind the xip memory
segment. We'd like to get rid of that in favor of supporting flash based
embedded platforms (Monta Vista work) soon.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 08:04:15 +02:00
Alexey Dobriyan
e8edc6e03a Detach sched.h from mm.h
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:18:19 -07:00
Nate Diller
01f2705daf fs: convert core functions to zero_user_page
It's very common for file systems to need to zero part or all of a page,
the simplist way is just to use kmap_atomic() and memset().  There's
actually a library function in include/linux/highmem.h that does exactly
that, but it's confusingly named memclear_highpage_flush(), which is
descriptive of *how* it does the work rather than what the *purpose* is.
So this patchset renames the function to zero_user_page(), and calls it
from the various places that currently open code it.

This first patch introduces the new function call, and converts all the
core kernel callsites, both the open-coded ones and the old
memclear_highpage_flush() ones.  Following this patch is a series of
conversions for each file system individually, per AKPM, and finally a
patch deprecating the old call.  The diffstat below shows the entire
patchset.

[akpm@linux-foundation.org: fix a few things]
Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:55 -07:00
Carsten Otte
a76c0b9763 [PATCH] mm: fix xip issue with /dev/zero
Fix the bug, that reading into xip mapping from /dev/zero fills the user
page table with ZERO_PAGE() entries.  Later on, xip cannot tell which pages
have been ZERO_PAGE() filled by access to a sparse mapping, and which ones
origin from /dev/zero.  It will unmap ZERO_PAGE from all mappings when
filling the sparse hole with data.  xip does now use its own zeroed page
for its sparse mappings.  Please apply.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-29 08:22:26 -07:00
Hugh Dickins
701dfbc1cb [PATCH] mm: mremap correct rmap accounting
Nick Piggin points out that page accounting on MIPS multiple ZERO_PAGEs
is not maintained by its move_pte, and could lead to freeing a ZERO_PAGE.

Instead of complicating that move_pte, just forget the minor optimization
when mremapping, and change the one thing which needed it for correctness
- filemap_xip use ZERO_PAGE(0) throughout instead of according to address.

[ "There is no block device driver one could use for XIP on mips
   platforms" - Carsten Otte ]

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-30 08:33:32 -08:00
Nick Piggin
7de6b80579 [PATCH] mm: more rmap debugging
Add more debugging in the rmap code in an attempt to locate to source of
the occasional "mapcount went negative" assertions.

Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22 08:55:49 -08:00
Josef "Jeff" Sipek
d3ac7f892b [PATCH] mm: change uses of f_{dentry,vfsmnt} to use f_path
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in linux/mm/.

Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:43 -08:00
Christoph Hellwig
f5e54d6e53 [PATCH] mark address_space_operations const
Same as with already do with the file operations: keep them in .rodata and
prevents people from doing runtime patching.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28 14:59:04 -07:00
Christoph Hellwig
870f481793 [PATCH] replace inode_update_time with file_update_time
To allow various options to work per-mount instead of per-sb we need a
struct vfsmount when updating ctime and mtime.  This preparation patch
replaces the inode_update_time routine with a file_update_atime routine so
we can easily get at the vfsmount.  (and the file makes more sense in this
context anyway).  Also get rid of the unused second argument - we always
want to update the ctime when calling this routine.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:30 -08:00
Jes Sorensen
1b1dcc1b57 [PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_sem
This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.

Modified-by: Ingo Molnar <mingo@elte.hu>

(finished the conversion)

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-09 15:59:24 -08:00
Hugh Dickins
c0718806cf [PATCH] mm: rmap with inner ptlock
rmap's page_check_address descend without page_table_lock.  First just
pte_offset_map in case there's no pte present worth locking for, then take
page_table_lock for the full check, and pass ptl back to caller in the same
style as pte_offset_map_lock.  __xip_unmap, page_referenced_one and
try_to_unmap_one use pte_unmap_unlock.  try_to_unmap_cluster also.

page_check_address reformatted to avoid progressive indentation.  No use is
made of its one error code, return NULL when it fails.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:41 -07:00
Hugh Dickins
67b02f119d [PATCH] mm: xip_unmap ZERO_PAGE fix
Small fix to the PageReserved patch: the mips ZERO_PAGE(address) depends on
address, so __xip_unmap is wrong to initialize page with that before address
is initialized; and in fact must re-evaluate it each iteration.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:41 -07:00
Nick Piggin
b5810039a5 [PATCH] core remove PageReserved
Remove PageReserved() calls from core code by tightening VM_RESERVED
handling in mm/ to cover PageReserved functionality.

PageReserved special casing is removed from get_page and put_page.

All setting and clearing of PageReserved is retained, and it is now flagged
in the page_alloc checks to help ensure we don't introduce any refcount
based freeing of Reserved pages.

MAP_PRIVATE, PROT_WRITE of VM_RESERVED regions is tentatively being
deprecated.  We never completely handled it correctly anyway, and is be
reintroduced in future if required (Hugh has a proof of concept).

Once PageReserved() calls are removed from kernel/power/swsusp.c, and all
arch/ and driver code, the Set and Clear calls, and the PG_reserved bit can
be trivially removed.

Last real user of PageReserved is swsusp, which uses PageReserved to
determine whether a struct page points to valid memory or not.  This still
needs to be addressed (a generic page_is_ram() should work).

A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and
thus mapcounted and count towards shared rss).  These writes to the struct
page could cause excessive cacheline bouncing on big systems.  There are a
number of ways this could be addressed if it is an issue.

Signed-off-by: Nick Piggin <npiggin@suse.de>

Refcount bug fix for filemap_xip.c

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:39 -07:00
Carsten Otte
afa597ba20 [PATCH] execute-in-place fixes
This patch includes feedback from Andrew and Christoph. Thanks for
taking time to review.

Use of empty_zero_page was eliminated to fix compilation for architectures
that don't have it.

This patch removes setting pages up-to-date in ext2_get_xip_page and all
bug checks to verify that the page is indeed up to date.  Setting the page
state on mapping to userland is bogus.  None of the code patchs involved
with these pages in mm cares about the page state.

still on my ToDo list: identify a place outside second extended where
__inode_direct_access should reside

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-15 09:54:50 -07:00
Geert Uytterhoeven
082ff0a999 [PATCH] mm/filemap_xip.c compilation fix
mm/filemap_xip.c: In function `__xip_unmap':
mm/filemap_xip.c:194: request for member `pte' in something not a structure or union

Apparently pte_pfn() takes a pte_t, not a pointer to a pte_t.  From looking
at asm/page.h, it seems to be the same on ia32 or ppc (iff
STRICT_MM_TYPECHECKS is enabled, which is disabled by default on ppc).

Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 16:01:00 -07:00
Carsten Otte
eb6fe0c388 [PATCH] xip: reduce code duplication
This patch reworks filemap_xip.c with the goal to reduce code duplication
from mm/filemap.c.  It applies agains 2.6.12-rc6-mm1.  Instead of
implementing the aio functions, this one implements the synchronous
read/write functions only.  For readv and writev, the generic fallback is
used.  For aio, we rely on the application doing the fallback.  Since our
"synchronous" function does memcpy immediately anyway, there is no
performance difference between using the fallbacks or implementing each
operation.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:06:41 -07:00
Carsten Otte
ceffc07852 [PATCH] xip: fs/mm: execute in place
- generic_file* file operations do no longer have a xip/non-xip split
- filemap_xip.c implements a new set of fops that require get_xip_page
  aop to work proper. all new fops are exported GPL-only (don't like to
  see whatever code use those except GPL modules)
- __xip_unmap now uses page_check_address, which is no longer static
  in rmap.c, and defined in linux/rmap.h
- mm/filemap.h is now much more clean, plainly having just Linus'
  inline funcs moved here from filemap.c
- fix includes in filemap_xip to make it build cleanly on i386

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:06:41 -07:00