This disables tcon re-use for DFS shares.
tcon->dfs_path stores the path that the tcon should connect to when
doing failing over.
If that tcon is used multiple times e.g. 2 mounts using it with
different prefixpath, each will need a different dfs_path but there is
only one tcon. The other solution would be to split the tcon in 2
tcons during failover but that is much harder.
tcons could not be shared with DFS in cifs.ko because in a
DFS namespace like:
//domain/dfsroot -> /serverA/dfsroot, /serverB/dfsroot
//serverA/dfsroot/link -> /serverA/target1/aa/bb
//serverA/dfsroot/link2 -> /serverA/target1/cc/dd
you can see that link and link2 are two DFS links that both resolve to
the same target share (/serverA/target1), so cifs.ko will only contain a
single tcon for both link and link2.
The problem with that is, if we (auto)mount "link" and "link2", cifs.ko
will only contain a single tcon for both DFS links so we couldn't
perform failover or refresh the DFS cache for both links because
tcon->dfs_path was set to either "link" or "link2", but not both --
which is wrong.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We use a spinlock while we are reading and accessing the destination address for a server.
We need to also use this spinlock to protect when we are modifying this address from
reconn_set_ipaddr().
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit(). That can confuse things. For example, if BSD process
accounting is enabled and the accounting file has FS_SYNC_FL set and is
located on an ext4 filesystem without a journal, then do_exit() can end
up calling ext4_write_inode(). That triggers the
WARN_ON_ONCE(current->flags & PF_MEMALLOC) there, as it assumes
(appropriately) that inodes aren't written when allocating memory.
This was originally reported for another kernel thread, xfsaild() [1].
cifs_demultiplex_thread() also exits with PF_MEMALLOC set, so it's
potentially subject to this same class of issue -- though I haven't been
able to reproduce the WARN_ON_ONCE() via CIFS, since unlike xfsaild(),
cifs_demultiplex_thread() is sent SIGKILL before exiting, and that
interrupts the write to the BSD process accounting file.
Either way, leaving PF_MEMALLOC set is potentially problematic. Let's
clean this up by properly saving and restoring PF_MEMALLOC.
[1] https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The warning we print on mount about how to use less secure dialects
(when the user does not specify a version on mount) is useful
but is noisy to print on every default mount, and can be changed
to a warn_once. Slightly updated the warning text as well to note
SMB3.1.1 which has been the default which is typically negotiated
(for a few years now) by most servers.
"No dialect specified on mount. Default has changed to a more
secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS
(SMB1). To use the less secure SMB1 dialect to access old
servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1)
specify vers=1.0 on mount."
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
We really, really don't want people using insecure dialects
unless they realize what they are doing ...
Add mount warning if mounting with vers=1.0 (older SMB1/CIFS
dialect) instead of the default (SMB2.1 or later, typically
SMB3.1.1).
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
This means it's consistently called and the callers don't need to
care about it.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For the case where we have a DFS path like below and we're currently
connected to targetA:
//dfsroot/link -> //targetA/share/foo, //targetB/share/bar
after failover, we should make sure to update cifs_sb->prepath so the
next operations will use the new prefix path "/bar".
Besides, in order to simplify the use of different prefix paths,
enforce CIFS_MOUNT_USE_PREFIX_PATH for DFS mounts so we don't have to
revalidate the root dentry every time we set a new prefix path.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A number of the debug statements output file or directory mode
in hex. Change these to print using octal.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When "backup intent" is requested on the mount (e.g. backupuid or
backupgid mount options), the corresponding flag was missing from
some of the operations.
Change all operations to use the macro cifs_create_options() to
set the backup intent flag if needed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1760879
Fix an oops in match_prepath() by making sure that the prepath string is not
NULL before we pass it into strcmp().
This is similar to other checks we make for example in cifs_root_iget()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With the addition of SMB session channels, we introduced new TCP
server pointers that have no sessions or tcons associated with them.
In this case, when we started looking for TCP connections, we might
end up picking session channel rather than the master connection,
hence failing to get either a session or a tcon.
In order to fix that, this patch introduces a new "is_channel" field
to TCP_Server_Info structure so we can skip session channels during
lookup of connections.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After doing mount() successfully we call cifs_try_adding_channels()
which will open as many channels as it can.
Channels are closed when the master session is closed.
The master connection becomes the first channel.
,-------------> global cifs_tcp_ses_list <-------------------------.
| |
'- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-'
(master con) (chan#1 con) (chan#2 con)
| ^ ^ ^
v '--------------------|--------------------'
cifs_ses |
- chan_count = 3 |
- chans[] ---------------------'
- smb3signingkey[]
(master signing key)
Note how channel connections don't have sessions. That's because
cifs_ses can only be part of one linked list (list_head are internal
to the elements).
For signing keys, each channel has its own signing key which must be
used only after the channel has been bound. While it's binding it must
use the master session signing key.
For encryption keys, since channel connections do not have sessions
attached we must now find matching session by looping over all sessions
in smb2_get_enc_key().
Each channel is opened like a regular server connection but at the
session setup request step it must set the
SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to.
Finally, while sending in compound_send_recv() for requests that
aren't negprot, ses-setup or binding related, use a channel by cycling
through the available ones (round-robin).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently a lot of the code to initialize a connection & session uses
the cifs_ses as input. But depending on if we are opening a new session
or a new channel we need to use different server pointers.
Add a "binding" flag in cifs_ses and a helper function that returns
the server ptr a session should use (only in the sess establishment
code path).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
adds:
- [no]multichannel to enable/disable multichannel
- max_channels=N to control how many channels to create
these options are then stored in the volume struct.
- store channels and max_channels in cifs_ses
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When an OPEN command is cancelled we mark a mid as
cancelled and let the demultiplex thread process it
by closing an open handle. The problem is there is
a race between a system call thread and the demultiplex
thread and there may be a situation when the mid has
been already processed before it is set as cancelled.
Fix this by processing cancelled requests when mids
are being destroyed which means that there is only
one thread referencing a particular mid. Also set
mids as cancelled unconditionally on their state.
Cc: Stable <stable@vger.kernel.org>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a race between a system call processing thread
and the demultiplex thread when mid->resp_buf becomes NULL
and later is being accessed to get credits. It happens when
the 1st thread wakes up before a mid callback is called in
the 2nd one but the mid state has already been set to
MID_RESPONSE_RECEIVED. This causes NULL pointer dereference
in mid callback.
Fix this by saving credits from the response before we
update the mid state and then use this value in the mid
callback rather then accessing a response buffer.
Cc: Stable <stable@vger.kernel.org>
Fixes: ee258d7915 ("CIFS: Move credit processing to mid callbacks for SMB3")
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the client hits reconnect it iterates over the mid
pending queue marking entries for retry and moving them
to a temporary list to issue callbacks later without holding
GlobalMid_Lock. In the same time there is no guarantee that
mids can't be removed from the temporary list or even
freed completely by another thread. It may cause a temporary
list corruption:
[ 430.454897] list_del corruption. prev->next should be ffff98d3a8f316c0, but was 2e885cb266355469
[ 430.464668] ------------[ cut here ]------------
[ 430.466569] kernel BUG at lib/list_debug.c:51!
[ 430.468476] invalid opcode: 0000 [#1] SMP PTI
[ 430.470286] CPU: 0 PID: 13267 Comm: cifsd Kdump: loaded Not tainted 5.4.0-rc3+ #19
[ 430.473472] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 430.475872] RIP: 0010:__list_del_entry_valid.cold+0x31/0x55
...
[ 430.510426] Call Trace:
[ 430.511500] cifs_reconnect+0x25e/0x610 [cifs]
[ 430.513350] cifs_readv_from_socket+0x220/0x250 [cifs]
[ 430.515464] cifs_read_from_socket+0x4a/0x70 [cifs]
[ 430.517452] ? try_to_wake_up+0x212/0x650
[ 430.519122] ? cifs_small_buf_get+0x16/0x30 [cifs]
[ 430.521086] ? allocate_buffers+0x66/0x120 [cifs]
[ 430.523019] cifs_demultiplex_thread+0xdc/0xc30 [cifs]
[ 430.525116] kthread+0xfb/0x130
[ 430.526421] ? cifs_handle_standard+0x190/0x190 [cifs]
[ 430.528514] ? kthread_park+0x90/0x90
[ 430.530019] ret_from_fork+0x35/0x40
Fix this by obtaining extra references for mids being retried
and marking them as MID_DELETED which indicates that such a mid
has been dequeued from the pending list.
Also move mid cleanup logic from DeleteMidQEntry to
_cifs_mid_q_entry_release which is called when the last reference
to a particular mid is put. This allows to avoid any use-after-free
of response buffers.
The patch needs to be backported to stable kernels. A stable tag
is not mentioned below because the patch doesn't apply cleanly
to any actively maintained stable kernel.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-and-tested-by: David Wysochanski <dwysocha@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We only want to avoid blocking in connect when mounting SMB root
filesystems, otherwise bail out from generic_ip_connect() so cifs.ko
can perform any reconnect failover appropriately.
This fixes DFS failover/reconnection tests in upstream buildbot.
Fixes: 8eecd1c2e5 ("cifs: Add support for root file systems")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Message was intended only for developer temporary build
In addition cleanup two minor warnings noticed by Coverity
and a trivial change to workaround a sparse warning
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Now that sparse has been fixed, it spotted a couple recent minor
endian errors (and removed one additional sparse warning).
Thanks to Luc Van Oostenryck for his help fixing sparse.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Introduce a new CONFIG_CIFS_ROOT option to handle root file systems
over a SMB share.
In order to mount the root file system during the init process, make
cifs.ko perform non-blocking socket operations while mounting and
accessing it.
Cc: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
In some cases to work around server bugs or performance
problems it can be helpful to be able to disable requesting
SMB2.1/SMB3 leases on a particular mount (not to all servers
and all shares we are mounted to). Add new mount parm
"nolease" which turns off requesting leases on directory
or file opens. Currently the only way to disable leases is
globally through a module load parameter. This is more
granular.
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Displayed in /proc/fs/cifs/Stats once for each
socket we are connected to.
This allows us to find out what the maximum number of
requests that had been in flight (at any one time). Note that
/proc/fs/cifs/Stats can be reset if you want to look for
maximum over a small period of time.
Sample output (immediately after mount):
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 5 maximum at one time: 2
Max requests in flight: 2
1) \\localhost\scratch
SMBs: 18
Bytes read: 0 Bytes written: 0
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Disable offload of the decryption of encrypted read responses
by default (equivalent to setting this new mount option "esize=0").
Allow setting the minimum encrypted read response size that we
will choose to offload to a worker thread - it is now configurable
via on a new mount option "esize="
Depending on which encryption mechanism (GCM vs. CCM) and
the number of reads that will be issued in parallel and the
performance of the network and CPU on the client, it may make
sense to enable this since it can provide substantial benefit when
multiple large reads are in flight at the same time.
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Add new mount option "signloosely" which enables signing but skips the
sometimes expensive signing checks in the responses (signatures are
calculated and sent correctly in the SMB2/SMB3 requests even with this
mount option but skipped in the responses). Although weaker for security
(and also data integrity in case a packet were corrupted), this can provide
enough of a performance benefit (calculating the signature to verify a
packet can be expensive especially for large packets) to be useful in
some cases.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If the server config (e.g. Samba smb.conf "csc policy = disable)
for the share indicates that the share should not be cached, log
a warning message if forced client side caching ("cache=ro" or
"cache=singleclient") is requested on mount.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If a share is known to be only to be accessed by one client, we
can aggressively cache writes not just reads to it.
Add "cache=" option (cache=singleclient) for mounting read write shares
(that will not be read or written to from other clients while we have
it mounted) in order to improve performance.
Signed-off-by: Steve French <stfrench@microsoft.com>
Add some additional logging so the user can see if the share they
mounted with cache=ro is considered read only by the server
CIFS: Attempting to mount //localhost/test
CIFS VFS: mounting share with read only caching. Ensure that the share will not be modified while in use.
CIFS VFS: read only mount of RW share
CIFS: Attempting to mount //localhost/test-ro
CIFS VFS: mounting share with read only caching. Ensure that the share will not be modified while in use.
CIFS VFS: mounted to read only share
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If a share is immutable (at least for the period that it will
be mounted) it would be helpful to not have to revalidate
dentries repeatedly that we know can not be changed remotely.
Add "cache=" option (cache=ro) for mounting read only shares
in order to improve performance in cases in which we know that
the share will not be changing while it is in use.
Signed-off-by: Steve French <stfrench@microsoft.com>
which can be used from contexts where we have a TCP_Server_Info *server.
This new macro will prepend the debugging string with "Server:<servername> "
which will help when debugging issues on hosts with many cifs connections
to several different servers.
Convert a bunch of cifs_dbg(VFS) calls to cifs_server_dbg(VFS)
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Using strscpy is cleaner, and avoids some problems with
handling maximum length strings. Linus noticed the
original problem and Aurelien pointed out some additional
problems. Fortunately most of this is SMB1 code (and
in particular the ASCII string handling older, which
is less common).
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's safer to zero out the password so that it can never be disclosed.
Fixes: 0c219f5799c7 ("cifs: set domainName when a domain-key is used in multiuser")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1710429
When we use a domain-key to authenticate using multiuser we must also set
the domainnmame for the new volume as it will be used and passed to the server
in the NTLMSSP Domain-name.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
My recent to change to only use force_sig for a synchronous events
wound up breaking signal reception cifs and drbd. I had overlooked
the fact that by default kthreads start out with all signals set to
SIG_IGN. So a change I thought was safe turned out to have made it
impossible for those kernel thread to catch their signals.
Reverting the work on force_sig is a bad idea because what the code
was doing was very much a misuse of force_sig. As the way force_sig
ultimately allowed the signal to happen was to change the signal
handler to SIG_DFL. Which after the first signal will allow userspace
to send signals to these kernel threads. At least for
wake_ack_receiver in drbd that does not appear actively wrong.
So correct this problem by adding allow_kernel_signal that will allow
signals whose siginfo reports they were sent by the kernel through,
but will not allow userspace generated signals, and update cifs and
drbd to call allow_kernel_signal in an appropriate place so that their
thread can receive this signal.
Fixing things this way ensures that userspace won't be able to send
signals and cause problems, that it is clear which signals the
threads are expecting to receive, and it guarantees that nothing
else in the system will be affected.
This change was partly inspired by similar cifs and drbd patches that
added allow_signal.
Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com>
Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: Steve French <smfrench@gmail.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Fixes: 247bc9470b ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes: 72abe3bcf0 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
Fixes: fee109901f ("signal/drbd: Use send_sig not force_sig")
Fixes: 3cf5d076fb ("signal: Remove task parameter from force_sig")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Fixes: 72abe3bcf0 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
The global change from force_sig caused module unloading of cifs.ko
to fail (since the cifsd process could not be killed, "rmmod cifs"
now would always fail)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=bdbT
-----END PGP SIGNATURE-----
Merge tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"Fixes (three for stable) and improvements including much faster
encryption (SMB3.1.1 GCM)"
* tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
smb3: smbdirect no longer experimental
cifs: fix crash in smb2_compound_op()/smb2_set_next_command()
cifs: fix crash in cifs_dfs_do_automount
cifs: fix parsing of symbolic link error response
cifs: refactor and clean up arguments in the reparse point parsing
SMB3: query inode number on open via create context
smb3: Send netname context during negotiate protocol
smb3: do not send compression info by default
smb3: add new mount option to retrieve mode from special ACE
smb3: Allow query of symlinks stored as reparse points
cifs: Fix a race condition with cifs_echo_request
cifs: always add credits back for unsolicited PDUs
fs: cifs: cifsssmb: Change return type of convert_ace_to_cifs_ace
add some missing definitions
cifs: fix typo in debug message with struct field ia_valid
smb3: minor cleanup of compound_send_recv
CIFS: Fix module dependency
cifs: simplify code by removing CONFIG_CIFS_ACL ifdef
cifs: Fix check for matching with existing mount
cifs: Properly handle auto disabling of serverino option
...
RHBZ: 1649907
Fix a crash that happens while attempting to mount a DFS referral from the same server on the root of a filesystem.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
-----BEGIN PGP SIGNATURE-----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=E3bF
-----END PGP SIGNATURE-----
Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring ACL support from David Howells:
"This changes the permissions model used by keys and keyrings to be
based on an internal ACL by the following means:
- Replace the permissions mask internally with an ACL that contains a
list of ACEs, each with a specific subject with a permissions mask.
Potted default ACLs are available for new keys and keyrings.
ACE subjects can be macroised to indicate the UID and GID specified
on the key (which remain). Future commits will be able to add
additional subject types, such as specific UIDs or domain
tags/namespaces.
Also split a number of permissions to give finer control. Examples
include splitting the revocation permit from the change-attributes
permit, thereby allowing someone to be granted permission to revoke
a key without allowing them to change the owner; also the ability
to join a keyring is split from the ability to link to it, thereby
stopping a process accessing a keyring by joining it and thus
acquiring use of possessor permits.
- Provide a keyctl to allow the granting or denial of one or more
permits to a specific subject. Direct access to the ACL is not
granted, and the ACL cannot be viewed"
* tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Provide KEYCTL_GRANT_PERMISSION
keys: Replace uid/gid/perm permissions checking with an ACL
Since in theory a server could respond with compressed read
responses even if not requested on read request (assuming that
a compression negcontext is sent in negotiate protocol) - do
not send compression information during negotiate protocol
unless the user asks for compression explicitly (compression
is experimental), and add a mount warning that compression
is experimental.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
There is a special ACE used by some servers to allow the mode
bits to be stored. This can be especially helpful in scenarios
in which the client is trusted, and access checking on the
client vs the POSIX mode bits is sufficient.
Add mount option to allow enabling this behavior.
Follow on patch will add support for chmod and queryinfo
(stat) by retrieving the POSIX mode bits from the special
ACE, SID: S-1-5-88-3
See e.g.
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/hh509017(v=ws.10)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
There is a race condition with how we send (or supress and don't send)
smb echos that will cause the client to incorrectly think the
server is unresponsive and thus needs to be reconnected.
Summary of the race condition:
1) Daisy chaining scheduling creates a gap.
2) If traffic comes unfortunate shortly after
the last echo, the planned echo is suppressed.
3) Due to the gap, the next echo transmission is delayed
until after the timeout, which is set hard to twice
the echo interval.
This is fixed by changing the timeouts from 2 to three times the echo interval.
Detailed description of the bug: https://lutz.donnerhacke.de/eng/Blog/Groundhog-Day-with-SMB-remount
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
not just if CONFIG_CIFS_DEBUG2 is enabled.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix mount options comparison when serverino option is turned off later
in cifs_autodisable_serverino() and thus avoiding mismatch of new cifs
mounts.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilove@microsoft.com>
When using multidialect negotiate (default or specifying vers=3.0 which
allows any smb3 dialect), fix how we check for an existing server session.
Before this fix if you mounted a second time to the same server (e.g. a
different share on the same server) we would only reuse the existing smb
session if a single dialect were requested (e.g. specifying vers=2.1 or vers=3.0
or vers=3.1.1 on the mount command). If a default mount (e.g. not
specifying vers=) is done then would always create a new socket connection
and SMB3 (or SMB3.1.1) session each time we connect to a different share
on the same server rather than reusing the existing one.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Replace the uid/gid/perm permissions checking on a key with an ACL to allow
the SETATTR and SEARCH permissions to be split. This will also allow a
greater range of subjects to represented.
============
WHY DO THIS?
============
The problem is that SETATTR and SEARCH cover a slew of actions, not all of
which should be grouped together.
For SETATTR, this includes actions that are about controlling access to a
key:
(1) Changing a key's ownership.
(2) Changing a key's security information.
(3) Setting a keyring's restriction.
And actions that are about managing a key's lifetime:
(4) Setting an expiry time.
(5) Revoking a key.
and (proposed) managing a key as part of a cache:
(6) Invalidating a key.
Managing a key's lifetime doesn't really have anything to do with
controlling access to that key.
Expiry time is awkward since it's more about the lifetime of the content
and so, in some ways goes better with WRITE permission. It can, however,
be set unconditionally by a process with an appropriate authorisation token
for instantiating a key, and can also be set by the key type driver when a
key is instantiated, so lumping it with the access-controlling actions is
probably okay.
As for SEARCH permission, that currently covers:
(1) Finding keys in a keyring tree during a search.
(2) Permitting keyrings to be joined.
(3) Invalidation.
But these don't really belong together either, since these actions really
need to be controlled separately.
Finally, there are number of special cases to do with granting the
administrator special rights to invalidate or clear keys that I would like
to handle with the ACL rather than key flags and special checks.
===============
WHAT IS CHANGED
===============
The SETATTR permission is split to create two new permissions:
(1) SET_SECURITY - which allows the key's owner, group and ACL to be
changed and a restriction to be placed on a keyring.
(2) REVOKE - which allows a key to be revoked.
The SEARCH permission is split to create:
(1) SEARCH - which allows a keyring to be search and a key to be found.
(2) JOIN - which allows a keyring to be joined as a session keyring.
(3) INVAL - which allows a key to be invalidated.
The WRITE permission is also split to create:
(1) WRITE - which allows a key's content to be altered and links to be
added, removed and replaced in a keyring.
(2) CLEAR - which allows a keyring to be cleared completely. This is
split out to make it possible to give just this to an administrator.
(3) REVOKE - see above.
Keys acquire ACLs which consist of a series of ACEs, and all that apply are
unioned together. An ACE specifies a subject, such as:
(*) Possessor - permitted to anyone who 'possesses' a key
(*) Owner - permitted to the key owner
(*) Group - permitted to the key group
(*) Everyone - permitted to everyone
Note that 'Other' has been replaced with 'Everyone' on the assumption that
you wouldn't grant a permit to 'Other' that you wouldn't also grant to
everyone else.
Further subjects may be made available by later patches.
The ACE also specifies a permissions mask. The set of permissions is now:
VIEW Can view the key metadata
READ Can read the key content
WRITE Can update/modify the key content
SEARCH Can find the key by searching/requesting
LINK Can make a link to the key
SET_SECURITY Can change owner, ACL, expiry
INVAL Can invalidate
REVOKE Can revoke
JOIN Can join this keyring
CLEAR Can clear this keyring
The KEYCTL_SETPERM function is then deprecated.
The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set,
or if the caller has a valid instantiation auth token.
The KEYCTL_INVALIDATE function then requires INVAL.
The KEYCTL_REVOKE function then requires REVOKE.
The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an
existing keyring.
The JOIN permission is enabled by default for session keyrings and manually
created keyrings only.
======================
BACKWARD COMPATIBILITY
======================
To maintain backward compatibility, KEYCTL_SETPERM will translate the
permissions mask it is given into a new ACL for a key - unless
KEYCTL_SET_ACL has been called on that key, in which case an error will be
returned.
It will convert possessor, owner, group and other permissions into separate
ACEs, if each portion of the mask is non-zero.
SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE
permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned
on if a keyring is being altered.
The KEYCTL_DESCRIBE function translates the ACL back into a permissions
mask to return depending on possessor, owner, group and everyone ACEs.
It will make the following mappings:
(1) INVAL, JOIN -> SEARCH
(2) SET_SECURITY -> SETATTR
(3) REVOKE -> WRITE if SETATTR isn't already set
(4) CLEAR -> WRITE
Note that the value subsequently returned by KEYCTL_DESCRIBE may not match
the value set with KEYCTL_SETATTR.
=======
TESTING
=======
This passes the keyutils testsuite for all but a couple of tests:
(1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now
returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed
if the type doesn't have ->read(). You still can't actually read the
key.
(2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't
work as Other has been replaced with Everyone in the ACL.
Signed-off-by: David Howells <dhowells@redhat.com>
