This reverts commit 545665ad1e.
The original code was correct and arguably more robust than the
patched version.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).
Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.
The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
General setup --->
Platform selection --->
Kernel Features --->
Boot options --->
Power management options --->
CPU Power Management --->
[*] ACPI (Advanced Configuration and Power Interface) Support --->
[*] Virtualization --->
[*] ARM Accelerated Cryptographic Algorithms --->
(or)
[*] ARM64 Accelerated Cryptographic Algorithms --->
...
-*- Cryptographic API --->
Library routines --->
Kernel hacking --->
and moves into the Cryptographic API menu, which now contains:
...
Accelerated Cryptographic Algorithms for CPU (arm) --->
(or)
Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*] Hardware crypto devices --->
...
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the CRYPTO_AES_ARM64 selection by the TI security
accelerator driver (SA2UL), which leads to this problem when
running make allmodconfig for arm (32-bit):
WARNING: unmet direct dependencies detected for CRYPTO_AES_ARM64
Depends on [n]: CRYPTO [=y] && ARM64
Selected by [m]:
- CRYPTO_DEV_SA2UL [=m] && CRYPTO [=y] && CRYPTO_HW [=y] && (ARCH_K3
|| COMPILE_TEST [=y])
Fixes: 7694b6ca64 ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Judgment should not be added in the back process. So clean it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dma_map_sg return 0 on error, and dma_map_error is not supposed to use
here.
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dma_map_sg return 0 on error, fix the error check and return -EIO to
caller.
Cc: Thara Gopinath <thara.gopinath@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dma_map_sg return 0 on error, it returns the number of
DMA address segments mapped (this may be shorter
than <nents> passed in if some elements of the scatter/gather
list are physically or virtually adjacent and an IOMMU maps
them with a single entry).
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add HACE crypto driver to support symmetric-key
encryption and decryption with multiple modes of
operation.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Reviewed-by: Dhananjay Phadke <dphadke@linux.microsoft.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hash and Crypto Engine (HACE) is designed to accelerate the
throughput of hash data digest, encryption, and decryption.
Basically, HACE can be divided into two independently engines
- Hash Engine and Crypto Engine. This patch aims to add HACE
hash engine driver for hash accelerator.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Reviewed-by: Dhananjay Phadke <dphadke@linux.microsoft.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the OS continues the PSP initialization when there is a write
failure to the init_ex_file. Therefore, the userspace would be told that
SEV is properly INIT'd even though the psp data file is not updated.
This is problematic because later when asked for the SEV data, the OS
won't be able to provide it.
Fixes: 3d725965f8 ("crypto: ccp - Add SEV_INIT_EX support")
Reported-by: Peter Gonda <pgonda@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jacky Li <jackyli@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the OS fails the PSP initialization when the file specified at
'init_ex_path' does not exist or has invalid content. However the SEV
spec just requires users to allocate 32KB of 0xFF in the file, which can
be taken care of by the OS easily.
To improve the robustness during the PSP init, leverage the retry
mechanism and continue the init process:
Before the first INIT_EX call, if the content is invalid or missing,
continue the process by feeding those contents into PSP instead of
aborting. PSP will then override it with 32KB 0xFF and return
SEV_RET_SECURE_DATA_INVALID status code. In the second INIT_EX call,
this 32KB 0xFF content will then be fed and PSP will write the valid
data to the file.
In order to do this, sev_read_init_ex_file should only be called once
for the first INIT_EX call. Calling it again for the second INIT_EX call
will cause the invalid file content overwriting the valid 32KB 0xFF data
provided by PSP in the first INIT_EX call.
Co-developed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Jacky Li <jackyli@google.com>
Reported-by: Alper Gun <alpergun@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
it is unnecessary to call spin_lock_bh in a tasklet.
Signed-off-by: Tuo Cao <91tuocao@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Data in the hardware cache needs to be written back to the memory
before the queue memory is released. Currently, the queue memory is
applied for when the driver is loaded and released when the driver is
removed. Therefore, the hardware cache does not need to be written back
when process puts queue.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The dump_show() is used to output hardware information for error locating.
It is not need to apply for memory to temporarily store the converted data.
It can directly output the data. Therefore, remove some unnecessary code.
Signed-off-by: Junchong Pan <panjunchong@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the function hisi_qm_memory_init(), if resource alloc fails after
idr_init, the initialized qp_idr needs to be destroyed.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hpre_cluster_inqry_write() always returns 0. So change the type
of hpre_cluster_inqry_write() to void.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some cleanup for code:
1. Change names for easy to understand.
2. Unify the variables type.
3. Use the right return value.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.Remove some useless steps during doing requests.
2.Adjust the possibility of branch prediction.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The double `the' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A quirk for fixing the committed TCB version, when upgrading from a
firmware version earlier than 1.50. This is a known issue, and the
documented workaround is to load the firmware twice.
Currently, this issue requires the following workaround:
sudo modprobe -r kvm_amd
sudo modprobe -r ccp
sudo modprobe ccp
sudo modprobe kvm_amd
Implement this workaround inside kernel by checking whether the API
version is less than 1.50, and if so, download the firmware twice.
This addresses the TCB version issue.
Link: https://lore.kernel.org/all/de02389f-249d-f565-1136-4af3655fab2a@profian.com/
Reported-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Jarkko Sakkinen <jarkko@profian.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Declan Murphy <declan.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Prabhjot Khurana <prabhjot.khurana@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using pm_runtime_resume_and_get() to instade of pm_runtime_get_sync
and pm_runtime_put_noidle.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Calls to pci_cleanup_aer_uncorrect_error_status() have already been
removed after commit 62b36c3ea6 ("PCI/AER: Remove
pci_cleanup_aer_uncorrect_error_status() calls"). But in commit
6c6dd5802c ("crypto: hisilicon/qm - add controller reset interface")
pci_aer_clear_nonfatal_status() was used again, so remove it in
this patch.
note: pci_cleanup_aer_uncorrect_error_status() was renamed to
pci_aer_clear_nonfatal_status() in commit 894020fdd8
("PCI/AER: Rationalize error status register clearing")
Signed-off-by: Zhuo Chen <chenzhuo.1@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Module device tables need to be declared as maybe_unused because
they will be unused when built-in and the corresponding option is
also disabled.
This patch adds the maybe_unused attributes to OF and ACPI. This
also allows us to remove the ifdef around the ACPI data structure.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
KASAN reported this Bug:
[17619.659757] BUG: KASAN: global-out-of-bounds in param_get_int+0x34/0x60
[17619.673193] Read of size 4 at addr fffff01332d7ed00 by task read_all/1507958
...
[17619.698934] The buggy address belongs to the variable:
[17619.708371] sgl_sge_nr+0x0/0xffffffffffffa300 [hisi_zip]
There is a mismatch in hisi_zip when get/set the variable sgl_sge_nr.
The type of sgl_sge_nr is u16, and get/set sgl_sge_nr by
param_get/set_int.
Replacing param_get/set_int to param_get/set_ushort can fix this bug.
Fixes: f081fda293 ("crypto: hisilicon - add sgl_sge_nr module param for zip")
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function qat_uclo_check_image() validates the MMP and AE firmware
images. If the QAT device supports firmware authentication (indicated
by the handle to firmware loader), the input signed binary MMP and AE
images are validated by parsing the following information:
- Header length
- Full size of the binary
- Type of binary image (MMP or AE Firmware)
Firmware binaries use RSA3K for signing and verification.
The header length for the RSA3k is 0x384 bytes.
All the size field values in the binary are quantified
as DWORDS (1 DWORD = 4bytes).
On an invalid value the function prints an error message and returns
with an error code "EINVAL".
Signed-off-by: Srinivas Kerekare <srinivas.kerekare@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Function of sahara_aes_crypt maybe could be called by function
of crypto_skcipher_encrypt during the rx softirq, so it is not
allowed to use mutex lock.
Fixes: c0c3c89ae3 ("crypto: sahara - replace tasklets with...")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
API:
- Make proc files report fips module name and version.
Algorithms:
- Move generic SHA1 code into lib/crypto.
- Implement Chinese Remainder Theorem for RSA.
- Remove blake2s.
- Add XCTR with x86/arm64 acceleration.
- Add POLYVAL with x86/arm64 acceleration.
- Add HCTR2.
- Add ARIA.
Drivers:
- Add support for new CCP/PSP device ID in ccp.
-----BEGIN PGP SIGNATURE-----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=rfWK
-----END PGP SIGNATURE-----
Merge tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Make proc files report fips module name and version
Algorithms:
- Move generic SHA1 code into lib/crypto
- Implement Chinese Remainder Theorem for RSA
- Remove blake2s
- Add XCTR with x86/arm64 acceleration
- Add POLYVAL with x86/arm64 acceleration
- Add HCTR2
- Add ARIA
Drivers:
- Add support for new CCP/PSP device ID in ccp"
* tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits)
crypto: tcrypt - Remove the static variable initialisations to NULL
crypto: arm64/poly1305 - fix a read out-of-bound
crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps
crypto: hisilicon/sec - fix auth key size error
crypto: ccree - Remove a useless dma_supported() call
crypto: ccp - Add support for new CCP/PSP device ID
crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq
crypto: testmgr - some more fixes to RSA test vectors
cyrpto: powerpc/aes - delete the rebundant word "block" in comments
hwrng: via - Fix comment typo
crypto: twofish - Fix comment typo
crypto: rmd160 - fix Kconfig "its" grammar
crypto: keembay-ocs-ecc - Drop if with an always false condition
Documentation: qat: rewrite description
Documentation: qat: Use code block for qat sysfs example
crypto: lib - add module license to libsha1
crypto: lib - make the sha1 library optional
crypto: lib - move lib/sha1.c into lib/crypto/
crypto: fips - make proc files report fips module name and version
...
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
While at it, add an explicit include <linux/bitmap.h>.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The authentication algorithm supports a maximum of 128-byte keys.
The allocated key memory is insufficient.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no point in calling dma_supported() before calling
dma_set_coherent_mask(). This function already calls dma_supported() and
returns an error (-EIO) if it fails.
So remove the superfluous dma_supported() call.
Moreover, setting a larger DMA mask will never fail when setting a smaller
one will succeed, so the whole "while" loop can be removed as well. (see
[1])
While at it, fix the name of the function reported in a dev_err().
[1]: https://lore.kernel.org/all/YteQ6Vx2C03UtCkG@infradead.org/
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new CCP/PSP PCI device ID. This uses same register offsets
as the previously supported structure.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Without MODULE_DEVICE_TABLE, crypto_safexcel.ko module is not automatically
loaded on platforms where inside-secure crypto HW is specified in device
tree (e.g. Armada 3720). So add missing MODULE_DEVICE_TABLE for of.
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hpre encryption driver may be used to encrypt and decrypt packets
during the rx softirq, it is not allowed to use GFP_KERNEL.
Fixes: c8b4b47707 ("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so ecc_dev is never NULL.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a engine status register that can be used to check if the
different HW crypto engines are enabled. Check that first and then only
try to enable the engines if they are not already on.
This has a couple benefits. First we don't need to use match_data for
this. Second, this driver can now work on HS devices where the engine
control registers are read-only and writing causes a firewall exception.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Setting these individually gives a better picture of supported
functions at a glance. Plus if the list changes an unwanted
one will not accidentally get set with GENMASK.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initialize sha_dd with platform_get_drvdata() when declaring it.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initialize sha_dd with platform_get_drvdata() when declaring it.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam has its own special NAPI weights. It's also a crypto device
so presumably it can't be used for packet Rx. Switch to the (new)
correct API.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so pdata is never NULL.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so dd is never NULL.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so dd is never NULL.
This is a preparation for making platform remove callbacks return void.
While touching this driver remove an assignment without effect.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so dd is never NULL.
This is a preparation for making platform remove callbacks return void.
While touching this driver remove a stray empty line.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so tdes_dd is never NULL.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so sha_dd is never NULL.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>