For ISO Broadcast, all BISes from a BIG have the same lifespan - they
cannot be created or terminated independently from each other.
This links together all BIS hcons that are part of the same BIG, so all
hcons are kept alive as long as the BIG is active.
If multiple BIS sockets are opened for a BIG handle, and only part of
them are closed at some point, the associated hcons will be marked as
open. If new sockets will later be opened for the same BIG, they will
be reassociated with the open BIS hcons.
All BIS hcons will be cleaned up and the BIG will be terminated when
the last BIS socket is closed from userspace.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it possible to bind a PA sync socket to a number of BISes
before issuing the BIG Create Sync command.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Current release - regressions:
- bpf: syzkaller found null ptr deref in unix_bpf proto add
- eth: i40e: fix ST code value for clause 45
Previous releases - regressions:
- core: return error from sk_stream_wait_connect() if sk_wait_event() fails
- ipv6: revert remove expired routes with a separated list of routes
- wifi rfkill:
- set GPIO direction
- fix crash with WED rx support enabled
- bluetooth:
- fix deadlock in vhci_send_frame
- fix use-after-free in bt_sock_recvmsg
- eth: mlx5e: fix a race in command alloc flow
- eth: ice: fix PF with enabled XDP going no-carrier after reset
- eth: bnxt_en: do not map packet buffers twice
Previous releases - always broken:
- core:
- check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
- check dev->gso_max_size in gso_features_check()
- mptcp: fix inconsistent state on fastopen race
- phy: skip LED triggers on PHYs on SFP modules
- eth: mlx5e:
- fix double free of encap_header
- fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=sEmi
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and bpf.
Current release - regressions:
- bpf: syzkaller found null ptr deref in unix_bpf proto add
- eth: i40e: fix ST code value for clause 45
Previous releases - regressions:
- core: return error from sk_stream_wait_connect() if sk_wait_event()
fails
- ipv6: revert remove expired routes with a separated list of routes
- wifi rfkill:
- set GPIO direction
- fix crash with WED rx support enabled
- bluetooth:
- fix deadlock in vhci_send_frame
- fix use-after-free in bt_sock_recvmsg
- eth: mlx5e: fix a race in command alloc flow
- eth: ice: fix PF with enabled XDP going no-carrier after reset
- eth: bnxt_en: do not map packet buffers twice
Previous releases - always broken:
- core:
- check vlan filter feature in vlan_vids_add_by_dev() and
vlan_vids_del_by_dev()
- check dev->gso_max_size in gso_features_check()
- mptcp: fix inconsistent state on fastopen race
- phy: skip LED triggers on PHYs on SFP modules
- eth: mlx5e:
- fix double free of encap_header
- fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()"
* tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: check dev->gso_max_size in gso_features_check()
kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail
net/ipv6: Revert remove expired routes with a separated list of routes
net: avoid build bug in skb extension length calculation
net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean()
net: stmmac: fix incorrect flag check in timestamp interrupt
selftests: add vlan hw filter tests
net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
net: hns3: add new maintainer for the HNS3 ethernet driver
net: mana: select PAGE_POOL
net: ks8851: Fix TX stall caused by TX buffer overrun
ice: Fix PF with enabled XDP going no-carrier after reset
ice: alter feature support check for SRIOV and LAG
ice: stop trashing VF VSI aggregator node ID information
mailmap: add entries for Geliang Tang
mptcp: fill in missing MODULE_DESCRIPTION()
mptcp: fix inconsistent state on fastopen race
selftests: mptcp: join: fix subflow_send_ack lookup
net: phy: skip LED triggers on PHYs on SFP modules
bpf: Add missing BPF_LINK_TYPE invocations
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZYQVjgAKCRDbK58LschI
g/NfAP9xMBCASd22+KPu44FtPPO5DKcdG7hATXZMpb/cygF8GQEAojcZ4jztx42S
F1+4RPEoxrn31oVYdtEGFY9q85ruzgA=
=2XhN
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-12-21
Hi David, hi Jakub, hi Paolo, hi Eric,
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 5 day(s) which contain
a total of 4 files changed, 45 insertions(+).
The main changes are:
1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(),
from Jiri Olsa.
2) Fix another syzkaller-found issue which triggered a NULL pointer dereference
in BPF sockmap for unconnected unix sockets, from John Fastabend.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add missing BPF_LINK_TYPE invocations
bpf: sockmap, test for unconnected af_unix sock
bpf: syzkaller found null ptr deref in unix_bpf proto add
====================
Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some drivers might misbehave if TSO packets get too big.
GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.
Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...
Add a generic check in gso_features_check() and fallback
to GSO when needed.
gso_max_size was added in the blamed commit.
Fixes: 82cc1a7a56 ("[NET]: Add per-connection option to set max TSO frame size")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 3dec89b14d.
The commit has some race conditions given how expires is managed on a
fib6_info in relation to gc start, adding the entry to the gc list and
setting the timer value leading to UAF. Revert the commit and try again
in a later release.
Fixes: 3dec89b14d ("net/ipv6: Remove expired routes with a separated list of routes")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219030243.25687-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GCC seems to incorrectly fail to evaluate skb_ext_total_length() at
compile time under certain conditions.
The issue even occurs if all values in skb_ext_type_len[] are "0",
ruling out the possibility of an actual overflow.
As the patch has been in mainline since v6.6 without triggering the
problem it seems to be a very uncommon occurrence.
As the issue only occurs when -fno-tree-loop-im is specified as part of
CFLAGS_GCOV, disable the BUILD_BUG_ON() only when building with coverage
reporting enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171924.4FozI5FG-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/487cfd35-fe68-416f-9bfd-6bb417f98304@app.fastmail.com/
Fixes: 5d21d0a65b ("net: generalize calculation of skb extensions length")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231218-net-skbuff-build-bug-v1-1-eefc2fb0a7d3@weissschuh.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Continue expanding Daniel's patch by adding new skb drop reasons that
are idiosyncratic to TC.
More specifically:
- SKB_DROP_REASON_TC_COOKIE_ERROR: An error occurred whilst
processing a tc ext cookie.
- SKB_DROP_REASON_TC_CHAIN_NOTFOUND: tc chain lookup failed.
- SKB_DROP_REASON_TC_RECLASSIFY_LOOP: tc exceeded max reclassify loop
iterations
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Incrementing on Daniel's patch[1], make tc-related drop reason more
flexible for remaining qdiscs - that is, all qdiscs aside from clsact.
In essence, the drop reason will be set by cls_api and act_api in case
any error occurred in the data path. With that, we can give the user more
detailed information so that they can distinguish between a policy drop
or an error drop.
[1] https://lore.kernel.org/all/20231009092655.22025-1-daniel@iogearbox.net
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move drop_reason from struct tcf_result to skb cb - more specifically to
struct tc_skb_cb. With that, we'll be able to also set the drop reason for
the remaining qdiscs (aside from clsact) that do not have access to
tcf_result when time comes to set the skb drop reason.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that both the common code as well as individual drivers support MDB
bulk deletion, allow user space to make such requests.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement MDB bulk deletion support in the bridge driver, allowing MDB
entries to be deleted in bulk according to provided parameters.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Invoke the new MDB bulk deletion device operation when the 'NLM_F_BULK'
flag is set in the netlink message header.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For MDB bulk delete we will need to validate 'MDBA_SET_ENTRY'
differently compared to regular delete. Specifically, allow the ifindex
to be zero (in case not filtering on bridge port) and force the address
to be zero as bulk delete based on address is not supported.
Do that by introducing a new policy and choosing the correct policy
based on the presence of the 'NLM_F_BULK' flag in the netlink message
header. Use nlmsg_parse() for strict validation.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add encryption key size check when acting as peripheral
- Shut up false-positive build warning
- Send reject if L2CAP command request is corrupted
- Fix Use-After-Free in bt_sock_recvmsg
- Fix not notifying when connection encryption changes
- Fix not checking if HCI_OP_INQUIRY has been sent
- Fix address type send over to the MGMT interface
- Fix deadlock in vhci_send_frame
-----BEGIN PGP SIGNATURE-----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=JAze
-----END PGP SIGNATURE-----
Merge tag 'for-net-2023-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Add encryption key size check when acting as peripheral
- Shut up false-positive build warning
- Send reject if L2CAP command request is corrupted
- Fix Use-After-Free in bt_sock_recvmsg
- Fix not notifying when connection encryption changes
- Fix not checking if HCI_OP_INQUIRY has been sent
- Fix address type send over to the MGMT interface
- Fix deadlock in vhci_send_frame
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZYHIBwAKCRDbK58LschI
g7nvAQDM5/5vMbsO9rEJAdHomJ4Ybvcv/2SG652za9DVEu6VUgD+JCLJ9He/hMx2
1wZ3wcjwxibNAZ/cZp6yu1JpOtR3rQo=
=BO/b
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-12-19
Hi David, hi Jakub, hi Paolo, hi Eric,
The following pull-request contains BPF updates for your *net-next* tree.
We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 40 files changed, 642 insertions(+), 2926 deletions(-).
The main changes are:
1) Revert all of BPF token-related patches for now as per list discussion [0],
from Andrii Nakryiko.
[0] https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com
2) Fix a syzbot-reported use-after-free read in nla_find() triggered from
bpf_skb_get_nlattr_nest() helper, from Jakub Kicinski.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
Revert BPF token-related functionality
bpf: Use nla_ok() instead of checking nla_len directly
====================
Link: https://lore.kernel.org/r/20231219170359.11035-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Expose the previously introduced notification multicast messages
filtering infrastructure and allow the user to select messages using
port index.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the user listening on a socket for devlink notifications
gets always all messages for all existing instances, even if he is
interested only in one of those. That may cause unnecessary overhead
on setups with thousands of instances present.
User is currently able to narrow down the devlink objects replies
to dump commands by specifying select attributes.
Allow similar approach for notifications. Introduce a new devlink
NOTIFY_FILTER_SET which the user passes the select attributes. Store
these per-socket and use them for filtering messages
during multicast send.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make the code using filter function a bit nicer by consolidating the
filter function arguments using typedef.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce an xarray for Generic netlink family to store per-socket
private. Initialize this xarray only if family uses per-socket privs.
Introduce genl_sk_priv_get() to get the socket priv pointer for a family
and initialize it in case it does not exist.
Introduce __genl_sk_priv_get() to obtain socket priv pointer for a
family under RCU read lock.
Allow family to specify the priv size, init() and destroy() callbacks.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a helper devlink_nl_notify_send() so each object notification
function does not have to call genlmsg_multicast_netns() with the same
arguments.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce devlink_nl_notify_need() helper and using it to check at the
beginning of notification functions to avoid overhead of composing
notification messages in case nobody listens.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce __devl_is_registered() which does not assert on devlink
instance lock and use it in notifications which may be called
without devlink instance lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of checking the xarray mark directly using xa_get_mark() helper
use devl_is_registered() helper which wraps it up. Note that there are
couple more users of xa_get_mark() left which are going to be handled
by the next patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I got the below warning trace:
WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify
CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0
Call Trace:
rtnl_dellink
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
__sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
entry_SYSCALL_64_after_hwframe
It can be repoduced via:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode 0
ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
ip netns exec ns1 ip link set bond_slave_1 master bond0
[1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off
[2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
[3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0
[4] ip netns exec ns1 ip link set bond_slave_1 nomaster
[5] ip netns exec ns1 ip link del veth2
ip netns del ns1
This is all caused by command [1] turning off the rx-vlan-filter function
of bond0. The reason is the same as commit 01f4fd2708 ("bonding: Fix
incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands
[2] [3] add the same vid to slave and master respectively, causing
command [4] to empty slave->vlan_info. The following command [5] triggers
this problem.
To fix this problem, we should add VLAN_FILTER feature checks in
vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect
addition or deletion of vlan_vid information.
Fixes: 348a1443cc ("vlan: introduce functions to do mass addition/deletion of vids by another device")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=stU2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The second features pull request for v6.8. A bigger one this time with
changes both to stack and drivers. We have a new Wifi band RFI (WBRF)
mitigation feature for which we pulled an immutable branch shared with
other subsystems. And, as always, other new features and bug fixes all
over.
Major changes:
cfg80211/mac80211
* AMD ACPI based Wifi band RFI (WBRF) mitigation feature
* Basic Service Set (BSS) usage reporting
* TID to link mapping support
* mac80211 hardware flag to disallow puncturing
iwlwifi
* new debugfs file fw_dbg_clear
mt76
* NVMEM EEPROM improvements
* mt7996 Extremely High Throughpu (EHT) improvements
* mt7996 Wireless Ethernet Dispatcher (WED) support
* mt7996 36-bit DMA support
ath12k
* support one MSI vector
* WCN7850: support AP mode
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmWAdRERHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu0RAf+JtHgfjmUMFb54xcncLgj8ZAN82E0ThE0
bPewQDhot0QTri4s7i5Kn8PCWjk+eKEmiIK+eARM+JDyZMTlCpXs2Y92cDAGQ8KG
+LbIMRQkwOUg0HmtX3NysUG3mGAx4QTcIX/y3+GmtMZpKXMFuNy6ODuFvuWFNJrF
3XTq1qFQNnA0XqUDKHW9uareeCiOMVOsqcxNW2FAi2gqRUfQpKnU1Ukv5iOjkqE9
i53GHzeAG2WI4/YjXaTEZvibkM3jqrPcquHlul3fVuq05qkKOEuiy2UalDjgDCYp
u91vbmMpcOjhlf9GIiu2BF6K/muEUCCIjlh5oxob0k9NiKhnPUZLng==
=6Y8M
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The second features pull request for v6.8. A bigger one this time with
changes both to stack and drivers. We have a new Wifi band RFI (WBRF)
mitigation feature for which we pulled an immutable branch shared with
other subsystems. And, as always, other new features and bug fixes all
over.
Major changes:
cfg80211/mac80211
* AMD ACPI based Wifi band RFI (WBRF) mitigation feature
* Basic Service Set (BSS) usage reporting
* TID to link mapping support
* mac80211 hardware flag to disallow puncturing
iwlwifi
* new debugfs file fw_dbg_clear
mt76
* NVMEM EEPROM improvements
* mt7996 Extremely High Throughpu (EHT) improvements
* mt7996 Wireless Ethernet Dispatcher (WED) support
* mt7996 36-bit DMA support
ath12k
* support one MSI vector
* WCN7850: support AP mode
* tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings
wifi: ath11k: workaround too long expansion sparse warnings
Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ"
wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor()
wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up
wifi: rtw89: add DBCC H2C to notify firmware the status
wifi: rtw89: mac: add suffix _ax to MAC functions
wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled
wifi: rtw89: 8922a: add power on/off functions
wifi: rtw89: add XTAL SI for WiFi 7 chips
wifi: rtw89: phy: print out RFK log with formatted string
wifi: rtw89: parse and print out RFK log from C2H events
wifi: rtw89: add C2H event handlers of RFK log and report
wifi: rtw89: load RFK log format string from firmware file
wifi: rtw89: fw: add version field to BB MCU firmware element
wifi: rtw89: fw: load TX power track tables from fw_element
wifi: mwifiex: configure BSSID consistently when starting AP
wifi: mwifiex: add extra delay for firmware ready
wifi: mac80211: sta_info.c: fix sentence grammar
wifi: mac80211: rx.c: fix sentence grammar
...
====================
Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume says:
> I believe commit 5f7fc5d69f ("SUNRPC: Resupply rq_pages from
> node-local memory") in Linux 6.5+ is incorrect. It passes
> unconditionally rq_pool->sp_id as the NUMA node.
>
> While the comment in the svc_pool declaration in sunrpc/svc.h says
> that sp_id is also the NUMA node id, it might not be the case if
> the svc is created using svc_create_pooled(). svc_created_pooled()
> can use the per-cpu pool mode therefore in this case sp_id would
> be the cpu id.
Fix this by reverting now. At a later point this minor optimization,
and the deceptive labeling of the sp_id field, can be revisited.
Reported-by: Guillaume Morin <guillaume@morinfr.org>
Closes: https://lore.kernel.org/linux-nfs/ZYC9rsno8qYggVt9@bender.morinfr.org/T/#u
Fixes: 5f7fc5d69f ("SUNRPC: Resupply rq_pages from node-local memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
With the introduction of the rcu_replace_pointer_rtnl helper,
cleanup the rtnl_unregister_* functions to use the helper instead
of open coding it.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds warn on missing MODULE_DESCRIPTION, add them here in MPTCP.
Only two were missing: two modules with different KUnit tests for MPTCP.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netlink PM can race with fastopen self-connect attempts, shutting
down the first subflow via:
MPTCP_PM_CMD_DEL_ADDR -> mptcp_nl_remove_id_zero_address ->
mptcp_pm_nl_rm_subflow_received -> mptcp_close_ssk
and transitioning such subflow to FIN_WAIT1 status before the syn-ack
packet is processed. The MPTCP code does not react to such state change,
leaving the connection in not-fallback status and the subflow handshake
uncompleted, triggering the following splat:
WARNING: CPU: 0 PID: 10630 at net/mptcp/subflow.c:1405 subflow_data_ready+0x39f/0x690 net/mptcp/subflow.c:1405
Modules linked in:
CPU: 0 PID: 10630 Comm: kworker/u4:11 Not tainted 6.6.0-syzkaller-14500-g1c41041124bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Workqueue: bat_events batadv_nc_worker
RIP: 0010:subflow_data_ready+0x39f/0x690 net/mptcp/subflow.c:1405
Code: 18 89 ee e8 e3 d2 21 f7 40 84 ed 75 1f e8 a9 d7 21 f7 44 89 fe bf 07 00 00 00 e8 0c d3 21 f7 41 83 ff 07 74 07 e8 91 d7 21 f7 <0f> 0b e8 8a d7 21 f7 48 89 df e8 d2 b2 ff ff 31 ff 89 c5 89 c6 e8
RSP: 0018:ffffc90000007448 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888031efc700 RCX: ffffffff8a65baf4
RDX: ffff888043222140 RSI: ffffffff8a65baff RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 000000000000000b R11: 0000000000000000 R12: 1ffff92000000e89
R13: ffff88807a534d80 R14: ffff888021c11a00 R15: 000000000000000b
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa19a0ffc81 CR3: 000000007a2db000 CR4: 00000000003506f0
DR0: 000000000000d8dd DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
tcp_data_ready+0x14c/0x5b0 net/ipv4/tcp_input.c:5128
tcp_data_queue+0x19c3/0x5190 net/ipv4/tcp_input.c:5208
tcp_rcv_state_process+0x11ef/0x4e10 net/ipv4/tcp_input.c:6844
tcp_v4_do_rcv+0x369/0xa10 net/ipv4/tcp_ipv4.c:1929
tcp_v4_rcv+0x3888/0x3b30 net/ipv4/tcp_ipv4.c:2329
ip_protocol_deliver_rcu+0x9f/0x480 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2e4/0x510 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip_local_deliver+0x1b6/0x550 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:461 [inline]
ip_rcv_finish+0x1c4/0x2e0 net/ipv4/ip_input.c:449
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip_rcv+0xce/0x440 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core+0x115/0x180 net/core/dev.c:5527
__netif_receive_skb+0x1f/0x1b0 net/core/dev.c:5641
process_backlog+0x101/0x6b0 net/core/dev.c:5969
__napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6531
napi_poll net/core/dev.c:6600 [inline]
net_rx_action+0x956/0xe90 net/core/dev.c:6733
__do_softirq+0x21a/0x968 kernel/softirq.c:553
do_softirq kernel/softirq.c:454 [inline]
do_softirq+0xaa/0xe0 kernel/softirq.c:441
</IRQ>
<TASK>
__local_bh_enable_ip+0xf8/0x120 kernel/softirq.c:381
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_nc_purge_paths+0x1ce/0x3c0 net/batman-adv/network-coding.c:471
batadv_nc_worker+0x9b1/0x10e0 net/batman-adv/network-coding.c:722
process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
process_scheduled_works kernel/workqueue.c:2703 [inline]
worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
</TASK>
To address the issue, catch the racing subflow state change and
use it to cause the MPTCP fallback. Such fallback is also used to
cause the first subflow state propagation to the msk socket via
mptcp_set_connected(). After this change, the first subflow can
additionally propagate the TCP_FIN_WAIT1 state, so rename the
helper accordingly.
Finally, if the state propagation is delayed to the msk release
callback, the first subflow can change to a different state in between.
Cache the relevant target state in a new msk-level field and use
such value to update the msk state at release time.
Fixes: 1e777f39b4 ("mptcp: add MSG_FASTOPEN sendmsg flag support")
Cc: stable@vger.kernel.org
Reported-by: <syzbot+c53d4d3ddb327e80bc51@syzkaller.appspotmail.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/458
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to address the issues encountered with commit 1effe8ca4e
("skbuff: fix coalescing for page_pool fragment recycling"), the
combination of the following condition was excluded from skb coalescing:
from->pp_recycle = 1
from->cloned = 1
to->pp_recycle = 1
However, with page pool environments, the aforementioned combination can
be quite common(ex. NetworkMananger may lead to the additional
packet_type being registered, thus the cloning). In scenarios with a
higher number of small packets, it can significantly affect the success
rate of coalescing. For example, considering packets of 256 bytes size,
our comparison of coalescing success rate is as follows:
Without page pool: 70%
With page pool: 13%
Consequently, this has an impact on performance:
Without page pool: 2.57 Gbits/sec
With page pool: 2.26 Gbits/sec
Therefore, it seems worthwhile to optimize this scenario and enable
coalescing of this particular combination. To achieve this, we need to
ensure the correct increment of the "from" SKB page's page pool
reference count (pp_ref_count).
Following this optimization, the success rate of coalescing measured in
our environment has improved as follows:
With page pool: 60%
This success rate is approaching the rate achieved without using page
pool, and the performance has also been improved:
With page pool: 2.52 Gbits/sec
Below is the performance comparison for small packets before and after
this optimization. We observe no impact to packets larger than 4K.
packet size before after improved
(bytes) (Gbits/sec) (Gbits/sec)
128 1.19 1.27 7.13%
256 2.26 2.52 11.75%
512 4.13 4.81 16.50%
1024 6.17 6.73 9.05%
2048 14.54 15.47 6.45%
4096 25.44 27.87 9.52%
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wrap code for checking if a page is a page_pool page into a
function for better readability and ease of reuse.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mina Almasry <almarsymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up to now, we were only subtracting from the number of used page fragments
to figure out when a page could be freed or recycled. A following patch
introduces support for multiple users referencing the same fragment. So
reduce the initial page fragments value to half to avoid overflowing.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Mina Almasry <almarsymina@google.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 1580ab63fc ("tcp/dccp: better use of ephemeral ports in connect()")
we added an heuristic to select even ports for connect() and odd ports for bind().
This was nice because no applications changes were needed.
But it added more costs when all even ports are in use,
when there are few listeners and many active connections.
Since then, IP_LOCAL_PORT_RANGE has been added to permit an application
to partition ephemeral port range at will.
This patch extends the idea so that if IP_LOCAL_PORT_RANGE is set on
a socket before accept(), port selection no longer favors even ports.
This means that connect() can find a suitable source port faster,
and applications can use a different split between connect() and bind()
users.
This should give more entropy to Toeplitz hash used in RSS: Using even
ports was wasting one bit from the 16bit sport.
A similar change can be done in inet_csk_find_open_port() if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20231214192939.1962891-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change inet_sk_get_local_port_range() to return a boolean,
telling the callers if the port range was provided by
IP_LOCAL_PORT_RANGE socket option.
Adds documentation while we are at it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231214192939.1962891-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure the various dtor functions match their prototype and retain
their CFI signatures, since they don't have their address taken, they
are prone to not getting CFI, making them impossible to call
indirectly.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231215092707.799451071@infradead.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF struct_ops uses __arch_prepare_bpf_trampoline() to write
trampolines for indirect function calls. These tramplines much have
matching CFI.
In order to obtain the correct CFI hash for the various methods, add a
matching structure that contains stub functions, the compiler will
generate correct CFI which we can pilfer for the trampolines.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231215092707.566977112@infradead.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This can cause a race with bt_sock_ioctl() because
bt_sock_recvmsg() gets the skb from sk->sk_receive_queue
and then frees it without holding lock_sock.
A use-after-free for a skb occurs with the following flow.
```
bt_sock_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
bt_sock_ioctl() -> skb_peek()
```
Add lock_sock to bt_sock_recvmsg() to fix this issue.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.
Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.
SMP over BREDR:
Before Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
After Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5F:5C:07:37:47:D5 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5E:03:1C:00:38:21 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
Store hint: Yes (0x01)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
L2CAP/COS/CED/BI-02-C PTS test send a malformed L2CAP signaling packet
with 2 commands in it (a connection request and an unknown command) and
expect to get a connection response packet and a command reject packet.
The second is currently not sent.
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Turning on -Wstringop-overflow globally exposed a misleading compiler
warning in bluetooth:
net/bluetooth/hci_event.c: In function 'hci_cc_read_class_of_dev':
net/bluetooth/hci_event.c:524:9: error: 'memcpy' writing 3 bytes into a
region of size 0 overflows the destination [-Werror=stringop-overflow=]
524 | memcpy(hdev->dev_class, rp->dev_class, 3);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem here is the check for hdev being NULL in bt_dev_dbg() that
leads the compiler to conclude that hdev->dev_class might be an invalid
pointer access.
Add another explicit check for the same condition to make sure gcc sees
this cannot happen.
Fixes: a9de924806 ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Fixes: 1b56c90018f0 ("Makefile: Enable -Wstringop-overflow globally")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid events or, more
likely, it is a result of fuzzing tools attempting to test the right
behavior of the stack when unexpected events are generated.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some layers such as SMP depend on getting notified about encryption
changes immediately as they only allow certain PDU to be transmitted
over an encrypted link which may cause SMP implementation to reject
valid PDUs received thus causing pairing to fail when it shouldn't.
Fixes: 7aca0ac479 ("Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
