8250_omap compatible UART IPs on all SoCs have registers aligned at 4
byte address boundary and constant byte addressability. Thus there is no
need for reg-io-width or reg-shift DT properties. These properties are
not used by 8250_omap driver nor documented as part of binding document.
Therefore drop them.
This is in preparation to move omap-serial.txt to YAML format.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210607134558.23704-1-vigneshr@ti.com
Interrupt routers are memory mapped peripherals, that are organized
in our dts bus hierarchy to closely represents the actual hardware
behavior.
However, without explicitly calling out the reg property, using
2021.03+ dt-schema package, this exposes the following problem with
dtbs_check:
/arch/arm64/boot/dts/ti/k3-am654-base-board.dt.yaml: bus@100000:
interrupt-controller0: {'type': 'object'} is not allowed for
{'compatible': ['ti,sci-intr'], .....
Even though we don't use interrupt router directly via memory mapped
registers and have to use it via the system controller, the hardware
block is memory mapped, so describe the base address in device tree.
This is a valid, comprehensive description of hardware and permitted
by the existing ti,sci-intr schema.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210511194821.13919-1-nm@ti.com
Lets rename the node name of TI-SCI node to be system-controller as it
is a better standardized name for the function that TI-SCI plays in the
SoC.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210510145033.7426-5-nm@ti.com
The DMSC node does'nt require any of "#address-cells", "#size-cells"
or "ranges" property as the child nodes are representations of SoC's
system controller itself, so align it with the bindings.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210510145033.7426-4-nm@ti.com
We currently use clocks as the node name for the node representing
TI-SCI clock nodes. This is better renamed to being clock-controller
as that is a better representative of the system controller function
as a clock controller for the SoC.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210510145033.7426-2-nm@ti.com
Update the INTA and INTR dt nodes to the latest DT bindings.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20200806074826.24607-13-lokeshvutla@ti.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The am654 SoC has three thermal zones namely MPU0, MPU1 and MCU
zones.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
VTM stands for voltage and thermal management.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Update the power-domain cells to 2 and mark all devices as
exclusive. Main uart 0 is the debug console for based boards
and it is used by different software entities like u-boot, atf,
linux. So just mark main_uart0 as shared device for base board.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add gpio0 node under wakeup domain. This has 56 gpios
and all are capable of generating banked interrupts.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Wakeup domain in AM654 SoC has an interrupt router connected to gpio
in wakeup domain. Add DT node for this interrupt router.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Use the am654 specific compatible for dmsc. This allows to use
the am654 specific RM mapping table.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Populate power-domain property for UART nodes, this is required for
Linux to enable UART clocks via PM calls. Without this UART instances
not initialized by bootloader (like main_uart1) fails to work in Linux.
Also, drop current-speed property from main_uart1 and main_uart2 nodes
as these UARTs are not initialized before Linux boots up and current
speed is unknown.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add pinctrl regions for the main and wkup mmr.
The range for main pinctrl region contains a gap
at offset 0x2e4, and because of this, the pinctrl
range is split into two sections.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
cbass_wakeup interconnect which is the parent of wakeup_uart node
defines address-cells=1 and size-cells=1, therefore fix up reg property
of wakeup_uart node accordingly. Otherwise, this UART instance fails to
probe if enabled.
Fixes: 4201af2544 ("arm64: dts: ti: am654: Add uart nodes")
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add TISCI compatible System controller for AM6 SoCs.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add uart nodes for AM654 device tree components.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
