Unfortunately, the ice driver doesn't respect the RCU critical section that
XSK wakeup is surrounded with. To fix this, add synchronize_rcu() calls to
paths that destroy resources that might be in use.
This was addressed in other AF_XDP ZC enabled drivers, for reference see
for example commit b3873a5be7 ("net/i40e: Fix concurrency issues
between config flow and XSK")
Fixes: efc2214b60 ("ice: Add support for XDP")
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Disable check for queue being enabled in ice_vc_dis_qs_msg, because
there could be a case when queues were created, but were not enabled.
We still need to delete those queues.
Normal workflow for VF looks like:
Enable path:
VIRTCHNL_OP_ADD_ETH_ADDR (opcode 10)
VIRTCHNL_OP_CONFIG_VSI_QUEUES (opcode 6)
VIRTCHNL_OP_ENABLE_QUEUES (opcode 8)
Disable path:
VIRTCHNL_OP_DISABLE_QUEUES (opcode 9)
VIRTCHNL_OP_DEL_ETH_ADDR (opcode 11)
The issue appears only in stress conditions when VF is enabled and
disabled very fast.
Eventually there will be a case, when queues are created by
VIRTCHNL_OP_CONFIG_VSI_QUEUES, but are not enabled by
VIRTCHNL_OP_ENABLE_QUEUES.
In turn, these queues are not deleted by VIRTCHNL_OP_DISABLE_QUEUES,
because there is a check whether queues are enabled in
ice_vc_dis_qs_msg.
When we bring up the VF again, we will see the "Failed to set LAN Tx queue
context" error during VIRTCHNL_OP_CONFIG_VSI_QUEUES step. This
happens because old 16 queues were not deleted and VF requests to create
16 more, but ice_sched_get_free_qparent in ice_ena_vsi_txq would fail to
find a parent node for first newly requested queue (because all nodes
are allocated to 16 old queues).
Testing Hints:
Just enable and disable VF fast enough, so it would be disabled before
reaching VIRTCHNL_OP_ENABLE_QUEUES.
while true; do
ip link set dev ens785f0v0 up
sleep 0.065 # adjust delay value for you machine
ip link set dev ens785f0v0 down
done
Fixes: 77ca27c417 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When VF is freshly created, but not brought up, ring->txq_teid
value is by default set to 0.
But 0 is a valid TEID. On some platforms the Root Node of
Tx scheduler has a TEID = 0. This can cause issues as shown below.
The proper way is to set ring->txq_teid to ICE_INVAL_TEID (0xFFFFFFFF).
Testing Hints:
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
ip link set dev ens785f0v0 up
ip link set dev ens785f0v0 down
If we have freshly created VF and quickly turn it on and off, so there
would be no time to reach VIRTCHNL_OP_CONFIG_VSI_QUEUES stage, then
VIRTCHNL_OP_DISABLE_QUEUES stage will fail with error:
[ 639.531454] disable queue 89 failed 14
[ 639.532233] Failed to disable LAN Tx queues, error: ICE_ERR_AQ_ERROR
[ 639.533107] ice 0000:02:00.0: Failed to stop Tx ring 0 on VSI 5
The reason for the fail is that we are trying to send AQ command to
delete queue 89, which has never been created and receive an "invalid
argument" error from firmware.
As this queue has never been created, it's teid and ring->txq_teid
have default value 0.
ice_dis_vsi_txq has a check against non-existent queues:
node = ice_sched_find_node_by_teid(pi->root, q_teids[i]);
if (!node)
continue;
But on some platforms the Root Node of Tx scheduler has a teid = 0.
Hence, ice_sched_find_node_by_teid finds a node with teid = 0 (it is
pi->root), and we go further to submit an erroneous request to firmware.
Fixes: 37bb839012 ("ice: Move common functions out of ice_main.c part 7/7")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Handling of all-multicast flag and associated multicast promiscuous
mode is broken in ice driver. When an user switches allmulticast
flag on or off the driver checks whether any VLANs are configured
over the interface (except default VLAN 0).
If any extra VLANs are registered it enables multicast promiscuous
mode for all these VLANs (including default VLAN 0) using
ICE_SW_LKUP_PROMISC_VLAN look-up type. In this situation all
multicast packets tagged with known VLAN ID or untagged are received
and multicast packets tagged with unknown VLAN ID ignored.
If no extra VLANs are registered (so only VLAN 0 exists) it enables
multicast promiscuous mode for VLAN 0 and uses ICE_SW_LKUP_PROMISC
look-up type. In this situation any multicast packets including
tagged ones are received.
The driver handles IFF_ALLMULTI in ice_vsi_sync_fltr() this way:
ice_vsi_sync_fltr() {
...
if (changed_flags & IFF_ALLMULTI) {
if (netdev->flags & IFF_ALLMULTI) {
if (vsi->num_vlans > 1)
ice_set_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS);
else
ice_set_promisc(..., ICE_MCAST_PROMISC_BITS);
} else {
if (vsi->num_vlans > 1)
ice_clear_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS);
else
ice_clear_promisc(..., ICE_MCAST_PROMISC_BITS);
}
}
...
}
The code above depends on value vsi->num_vlan that specifies number
of VLANs configured over the interface (including VLAN 0) and
this is problem because that value is modified in NDO callbacks
ice_vlan_rx_add_vid() and ice_vlan_rx_kill_vid().
Scenario 1:
1. ip link set ens7f0 allmulticast on
2. ip link add vlan10 link ens7f0 type vlan id 10
3. ip link set ens7f0 allmulticast off
4. ip link set ens7f0 allmulticast on
[1] In this scenario IFF_ALLMULTI is enabled and the driver calls
ice_set_promisc(..., ICE_MCAST_PROMISC_BITS) that installs
multicast promisc rule with non-VLAN look-up type.
[2] Then VLAN with ID 10 is added and vsi->num_vlan incremented to 2
[3] Command switches IFF_ALLMULTI off and the driver calls
ice_clear_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS) but this
call is effectively NOP because it looks for multicast promisc
rules for VLAN 0 and VLAN 10 with VLAN look-up type but no such
rules exist. So the all-multicast remains enabled silently
in hardware.
[4] Command tries to switch IFF_ALLMULTI on and the driver calls
ice_clear_promisc(..., ICE_MCAST_PROMISC_BITS) but this call
fails (-EEXIST) because non-VLAN multicast promisc rule already
exists.
Scenario 2:
1. ip link add vlan10 link ens7f0 type vlan id 10
2. ip link set ens7f0 allmulticast on
3. ip link add vlan20 link ens7f0 type vlan id 20
4. ip link del vlan10 ; ip link del vlan20
5. ip link set ens7f0 allmulticast off
[1] VLAN with ID 10 is added and vsi->num_vlan==2
[2] Command switches IFF_ALLMULTI on and driver installs multicast
promisc rules with VLAN look-up type for VLAN 0 and 10
[3] VLAN with ID 20 is added and vsi->num_vlan==3 but no multicast
promisc rules is added for this new VLAN so the interface does
not receive MC packets from VLAN 20
[4] Both VLANs are removed but multicast rule for VLAN 10 remains
installed so interface receives multicast packets from VLAN 10
[5] Command switches IFF_ALLMULTI off and because vsi->num_vlan is 1
the driver tries to remove multicast promisc rule for VLAN 0
with non-VLAN look-up that does not exist.
All-multicast looks disabled from user point of view but it
is partially enabled in HW (interface receives all multicast
packets either untagged or tagged with VLAN ID 10)
To resolve these issues the patch introduces these changes:
1. Adds handling for IFF_ALLMULTI to ice_vlan_rx_add_vid() and
ice_vlan_rx_kill_vid() callbacks. So when VLAN is added/removed
and IFF_ALLMULTI is enabled an appropriate multicast promisc
rule for that VLAN ID is added/removed.
2. In ice_vlan_rx_add_vid() when first VLAN besides VLAN 0 is added
so (vsi->num_vlan == 2) and IFF_ALLMULTI is enabled then look-up
type for existing multicast promisc rule for VLAN 0 is updated
to ICE_MCAST_VLAN_PROMISC_BITS.
3. In ice_vlan_rx_kill_vid() when last VLAN besides VLAN 0 is removed
so (vsi->num_vlan == 1) and IFF_ALLMULTI is enabled then look-up
type for existing multicast promisc rule for VLAN 0 is updated
to ICE_MCAST_PROMISC_BITS.
4. Both ice_vlan_rx_{add,kill}_vid() have to run under ICE_CFG_BUSY
bit protection to avoid races with ice_vsi_sync_fltr() that runs
in ice_service_task() context.
5. Bit ICE_VSI_VLAN_FLTR_CHANGED is use-less and can be removed.
6. Error messages added to ice_fltr_*_vsi_promisc() helper functions
to avoid them in their callers
7. Small improvements to increase readability
Fixes: 5eda8afd6b ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 2ccc1c1ccc ("ice: Remove excess error variables") merged
the usage of 'status' and 'err' variables into single one in
function ice_set_mac_address(). Unfortunately this causes
a regression when call of ice_fltr_add_mac() returns -EEXIST because
this return value does not indicate an error in this case but
value of 'err' remains to be -EEXIST till the end of the function
and is returned to caller.
Prior mentioned commit this does not happen because return value of
ice_fltr_add_mac() was stored to 'status' variable first and
if it was -EEXIST then 'err' remains to be zero.
Fix the problem by reset 'err' to zero when ice_fltr_add_mac()
returns -EEXIST.
Fixes: 2ccc1c1ccc ("ice: Remove excess error variables")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
VSI is set as default forwarding one when promisc mode is set for
PF interface, when PF is switched to switchdev mode or when VF
driver asks to enable allmulticast or promisc mode for the VF
interface (when vf-true-promisc-support priv flag is off).
The third case is buggy because in that case VSI associated with
VF remains as default one after VF removal.
Reproducer:
1. Create VF
echo 1 > sys/class/net/ens7f0/device/sriov_numvfs
2. Enable allmulticast or promisc mode on VF
ip link set ens7f0v0 allmulticast on
ip link set ens7f0v0 promisc on
3. Delete VF
echo 0 > sys/class/net/ens7f0/device/sriov_numvfs
4. Try to enable promisc mode on PF
ip link set ens7f0 promisc on
Although it looks that promisc mode on PF is enabled the opposite
is true because ice_vsi_sync_fltr() responsible for IFF_PROMISC
handling first checks if any other VSI is set as default forwarding
one and if so the function does not do anything. At this point
it is not possible to enable promisc mode on PF without re-probe
device.
To resolve the issue this patch clear default forwarding VSI
during ice_vsi_release() when the VSI to be released is the default
one.
Fixes: 01b5e89aab ("ice: Add VF promiscuous support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ice driver tries to always create XDP rings array to be
num_possible_cpus() sized, regardless of user's queue count setting that
can be changed via ethtool -L for example.
Currently, ice_tx_xsk_pool() calculates the qid by decrementing the
ring->q_index by the count of XDP queues, but ring->q_index is set to 'i
+ vsi->alloc_txq'.
When user did ethtool -L $IFACE combined 1, alloc_txq is 1, but
vsi->num_xdp_txq is still num_possible_cpus(). Then, ice_tx_xsk_pool()
will do OOB access and in the final result ring would not get xsk_pool
pointer assigned. Then, each ice_xsk_wakeup() call will fail with error
and it will not be possible to get into NAPI and do the processing from
driver side.
Fix this by decrementing vsi->alloc_txq instead of vsi->num_xdp_txq from
ring-q_index in ice_tx_xsk_pool() so the calculation is reflected to the
setting of ring->q_index.
Fixes: 22bf877e52 ("ice: introduce XDP_TX fallback path")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-5-maciej.fijalkowski@intel.com
This can happen with big budget values and some breakage of re-filling
descriptors as we do not clear the entry that ntu is pointing at the end
of ice_alloc_rx_bufs_zc. So if ntc is at ntu then it might be the case
that status_error0 has an old, uncleared value and ntc would go over
with processing which would result in false results.
Break Rx loop when ntc == ntu to avoid broken behavior.
Fixes: 3876ff525d ("ice: xsk: Handle SW XDP ring wrap and bump tail more often")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-4-maciej.fijalkowski@intel.com
The NIC Tx ring completion routine cleans entries from the ring in
batches. However, it processes one more batch than it is supposed
to. Note that this does not matter from a functionality point of view
since it will not find a set DD bit for the next batch and just exit
the loop. But from a performance perspective, it is faster to
terminate the loop before and not issue an expensive read over PCIe to
get the DD bit.
Fixes: 126cdfe100 ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-3-maciej.fijalkowski@intel.com
ice_send_event_to_aux() eventually descends to mutex_lock()
(-> might_sched()), so it must not be called under non-task
context. However, at least two fixes have happened already for the
bug splats occurred due to this function being called from atomic
context.
To make the emergency landings softer, bail out early when executed
in non-task context emitting a warn splat only once. This way we
trade some events being potentially lost for system stability and
avoid any related hangs and crashes.
Fixes: 348048e724 ("ice: Implement iidc operations")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a kernel BUG splat on processing aux critical error
interrupts in ice_misc_intr():
[ 2100.917085] BUG: scheduling while atomic: swapper/15/0/0x00010000
...
[ 2101.060770] Call Trace:
[ 2101.063229] <IRQ>
[ 2101.065252] dump_stack+0x41/0x60
[ 2101.068587] __schedule_bug.cold.100+0x4c/0x58
[ 2101.073060] __schedule+0x6a4/0x830
[ 2101.076570] schedule+0x35/0xa0
[ 2101.079727] schedule_preempt_disabled+0xa/0x10
[ 2101.084284] __mutex_lock.isra.7+0x310/0x420
[ 2101.088580] ? ice_misc_intr+0x201/0x2e0 [ice]
[ 2101.093078] ice_send_event_to_aux+0x25/0x70 [ice]
[ 2101.097921] ice_misc_intr+0x220/0x2e0 [ice]
[ 2101.102232] __handle_irq_event_percpu+0x40/0x180
[ 2101.106965] handle_irq_event_percpu+0x30/0x80
[ 2101.111434] handle_irq_event+0x36/0x53
[ 2101.115292] handle_edge_irq+0x82/0x190
[ 2101.119148] handle_irq+0x1c/0x30
[ 2101.122480] do_IRQ+0x49/0xd0
[ 2101.125465] common_interrupt+0xf/0xf
[ 2101.129146] </IRQ>
...
As Andrew correctly mentioned previously[0], the following call
ladder happens:
ice_misc_intr() <- hardirq
ice_send_event_to_aux()
device_lock()
mutex_lock()
might_sleep()
might_resched() <- oops
Add a new PF state bit which indicates that an aux critical error
occurred and serve it in ice_service_task() in process context.
The new ice_pf::oicr_err_reg is read-write in both hardirq and
process contexts, but only 3 bits of non-critical data probably
aren't worth explicit synchronizing (and they're even in the same
byte [31:24]).
[0] https://lore.kernel.org/all/YeSRUVmrdmlUXHDn@lunn.ch
Fixes: 348048e724 ("ice: Implement iidc operations")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2022-03-17
This series contains updates to i40e and igb drivers.
Tom Rix moves a conversion to little endian to occur only when the
value is used for i40e. He also zeros out a structure to resolve
possible use of garbage value for igb as reported by clang.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igb: zero hwtstamp by default
i40e: little endian only valid checksums
====================
Link: https://lore.kernel.org/r/20220317160236.3534321-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-03-16
This series contains updates to gtp and ice driver.
Wojciech fixes smatch reported inconsistent indenting for gtp and ice.
Yang Yingliang fixes a couple of return value checks for GNSS to IS_PTR
instead of null.
Jacob adds support for trace events on tx timestamps.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: add trace events for tx timestamps
ice: fix return value check in ice_gnss.c
ice: Fix inconsistent indenting in ice_switch
gtp: Fix inconsistent indenting
====================
Link: https://lore.kernel.org/r/20220316204024.3201500-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent commit 974578017f ("iavf: Add waiting so the port is
initialized in remove") adds a wait-loop at the beginning of
iavf_remove() to ensure that port initialization is finished
prior unregistering net device. This causes a regression
in reboot/shutdown scenario because in this case callback
iavf_shutdown() is called and this callback detaches the device,
makes it down if it is running and sets its state to __IAVF_REMOVE.
Later shutdown callback of associated PF driver (e.g. ice_shutdown)
is called. That callback calls among other things sriov_disable()
that calls indirectly iavf_remove() (see stack trace below).
As the adapter state is already __IAVF_REMOVE then the mentioned
loop is end-less and shutdown process hangs.
The patch fixes this by checking adapter's state at the beginning
of iavf_remove() and skips the rest of the function if the adapter
is already in remove state (shutdown is in progress).
Reproducer:
1. Create VF on PF driven by ice or i40e driver
2. Ensure that the VF is bound to iavf driver
3. Reboot
[52625.981294] sysrq: SysRq : Show Blocked State
[52625.988377] task:reboot state:D stack: 0 pid:17359 ppid: 1 f2
[52625.996732] Call Trace:
[52625.999187] __schedule+0x2d1/0x830
[52626.007400] schedule+0x35/0xa0
[52626.010545] schedule_hrtimeout_range_clock+0x83/0x100
[52626.020046] usleep_range+0x5b/0x80
[52626.023540] iavf_remove+0x63/0x5b0 [iavf]
[52626.027645] pci_device_remove+0x3b/0xc0
[52626.031572] device_release_driver_internal+0x103/0x1f0
[52626.036805] pci_stop_bus_device+0x72/0xa0
[52626.040904] pci_stop_and_remove_bus_device+0xe/0x20
[52626.045870] pci_iov_remove_virtfn+0xba/0x120
[52626.050232] sriov_disable+0x2f/0xe0
[52626.053813] ice_free_vfs+0x7c/0x340 [ice]
[52626.057946] ice_remove+0x220/0x240 [ice]
[52626.061967] ice_shutdown+0x16/0x50 [ice]
[52626.065987] pci_device_shutdown+0x34/0x60
[52626.070086] device_shutdown+0x165/0x1c5
[52626.074011] kernel_restart+0xe/0x30
[52626.077593] __do_sys_reboot+0x1d2/0x210
[52626.093815] do_syscall_64+0x5b/0x1a0
[52626.097483] entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes: 974578017f ("iavf: Add waiting so the port is initialized in remove")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://lore.kernel.org/r/20220317104524.2802848-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clang static analysis reports this representative issue
igb_ptp.c:997:3: warning: The left operand of '+' is a
garbage value
ktime_add_ns(shhwtstamps.hwtstamp, adjust);
^ ~~~~~~~~~~~~~~~~~~~~
shhwtstamps.hwtstamp is set by a call to
igb_ptp_systim_to_hwtstamp(). In the switch-statement
for the hw type, the hwtstamp is zeroed for matches
but not the default case. Move the memset out of
switch-statement. This degarbages the default case
and reduces the size.
Some whitespace cleanup of empty lines
Signed-off-by: Tom Rix <trix@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The calculation of the checksum can fail.
So move converting the checksum to little endian
to inside the return status check.
Signed-off-by: Tom Rix <trix@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We've previously run into many issues related to the latency of a Tx
timestamp completion with the ice hardware. It can be difficult to
determine the root cause of a slow Tx timestamp. To aid in this,
introduce new trace events which capture timing data about when the
driver reaches certain points while processing a transmit timestamp
* ice_tx_tstamp_request: Trace when the stack initiates a new timestamp
request.
* ice_tx_tstamp_fw_req: Trace when the driver begins a read of the
timestamp register in the work thread.
* ice_tx_tstamp_fw_done: Trace when the driver finishes reading a
timestamp register in the work thread.
* ice_tx_tstamp_complete: Trace when the driver submits the skb back to
the stack with a completed Tx timestamp.
These trace events can be enabled using the standard trace event
subsystem exposed by the ice driver. If they are disabled, they become
no-ops with no run time cost.
The following is a simple GNU AWK script which can highlight one
potential way to use the trace events to capture latency data from the
trace buffer about how long the driver takes to process a timestamp:
-----
BEGIN {
PREC=256
}
# Detect requests
/tx_tstamp_request/ {
time=strtonum($4)
skb=$7
# Store the time of request for this skb
requests[skb] = time
printf("skb %s: idx %d at %.6f\n", skb, idx, time)
}
# Detect completions
/tx_tstamp_complete/ {
time=strtonum($4)
skb=$7
idx=$9
if (skb in requests) {
latency = (time - requests[skb]) * 1000
printf("skb %s: %.3f to complete\n", skb, latency)
if (latency > 4) {
printf(">>> HIGH LATENCY <<<\n")
}
printf("\n")
} else {
printf("!!! skb %s (idx %d) at %.6f\n", skb, idx, time)
}
}
-----
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
kthread_create_worker() and tty_alloc_driver() return ERR_PTR()
and never return NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Fixes: 43113ff734 ("ice: add TTY for GNSS module for E810T device")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix the following warning as reported by smatch:
smatch warnings:
drivers/net/ethernet/intel/ice/ice_switch.c:5568 ice_find_dummy_packet() warn: inconsistent indenting
Fixes: 9a225f81f5 ("ice: Support GTP-U and GTP-C offload in switchdev")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix double free possibility in iavf_disable_vf, as crit_lock is
freed in caller, iavf_reset_task. Add kernel-doc for iavf_disable_vf.
Remove mutex_unlock in iavf_disable_vf.
Without this patch there is double free scenario, when calling
iavf_reset_task.
Fixes: e85ff9c631 ("iavf: Fix deadlock in iavf_reset_task")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently fdir_fltr_lock is accessed in ice_vsi_release_all() function
after it is destroyed. Instead destroy mutex after ice_vsi_release_all.
Fixes: 40319796b7 ("ice: Add flow director support for channel mode")
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It is possible to do NULL pointer dereference in routine that updates
Tx ring stats. Currently only stats and bytes are updated when ring
pointer is valid, but later on ring is accessed to propagate gathered Tx
stats onto VSI stats.
Change the existing logic to move to next ring when ring is NULL.
Fixes: e72bba2135 ("ice: split ice_ring onto Tx/Rx separate structs")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_check_vf_init function takes both a PF and a VF pointer. Every
caller looks up the PF pointer from the VF structure. Some callers only
use of the PF pointer is call this function. Move the lookup inside
ice_check_vf_init and drop the unnecessary argument.
Cleanup the callers to drop the now unnecessary local variables. In
particular, replace the local PF pointer with a HW structure pointer in
ice_vc_get_vf_res_msg which simplifies a few accesses to the HW
structure in that function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Just as we moved the generic virtualization library logic into
ice_vf_lib.c, move the virtchnl message handling into ice_virtchnl.c
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Before we move the virtchnl message handling from ice_sriov.c into
ice_virtchnl.c, cleanup some long line warnings to avoid checkpatch.pl
complaints.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_reset_vf function performs actions which must be taken only
while holding the VF configuration lock. Some flows already acquired the
lock, while other flows must acquire it just for the reset function. Add
the ICE_VF_RESET_LOCK flag to the function so that it can handle taking
and releasing the lock instead at the appropriate scope.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In some cases of resetting a VF, the PF would like to first notify the
VF that a reset is impending. This is currently done via
ice_vc_notify_vf_reset. A wrapper to ice_reset_vf, ice_vf_reset_vf, is
used to call this function first before calling ice_reset_vf.
In fact, every single call to ice_vc_notify_vf_reset occurs just prior
to a call to ice_vc_reset_vf.
Now that ice_reset_vf has flags, replace this separate call with an
ICE_VF_RESET_NOTIFY flag. This removes an unnecessary exported function
of ice_vc_notify_vf_reset, and also makes there be a single function to
reset VFs (ice_reset_vf).
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_reset_vf function takes a boolean parameter which indicates
whether or not the reset is due to a VFLR event.
This is somewhat confusing to read because readers must interpret what
"true" and "false" mean when seeing a line of code like
"ice_reset_vf(vf, false)".
We will want to add another toggle to the ice_reset_vf in a following
change. To avoid proliferating many arguments, convert this function to
take flags instead. ICE_VF_RESET_VFLR will indicate if this is a VFLR
reset. A value of 0 indicates no flags.
One could argue that "ice_reset_vf(vf, 0)" is no more readable than
"ice_reset_vf(vf, false)".. However, this type of flags interface is
somewhat common and using 0 to mean "no flags" makes sense in this
context. We could bother to add a define for "ICE_VF_RESET_PLAIN" or
something similar, but this can be confusing since its not an actual bit
flag.
This paves the way to add another flag to the function in a following
change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_reset_vf function returns a boolean value indicating whether or
not the VF reset. This is a bit confusing since it means that callers
need to know how to interpret the return value when needing to indicate
an error.
Refactor the function and call sites to report a regular error code. We
still report success (i.e. return 0) in cases where the reset is in
progress or is disabled.
Existing callers don't care because they do not check the return value.
We keep the error code anyways instead of a void return because we
expect future code which may care about or at least report the error
value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_reset_all_vfs function returns true if any VFs were reset, and
false otherwise. However, no callers check the return value.
Drop this return value and make the function void since the callers do
not care about this.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_reset_all_vfs function takes a parameter to handle whether its
operating after a VFLR event or not. This is not necessary as every
caller always passes true. Simplify the interface by removing the
parameter.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that the reset functions do not rely on Single Root specific
behavior, move the ice_reset_vf, ice_reset_all_vfs, and
ice_vf_rebuild_host_cfg functions and their dependent helper functions
out of ice_sriov.c and into ice_vf_lib.c
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We're about to move ice_reset_vf out of ice_sriov.c and into
ice_vf_lib.c
One of the dev_err statements has a checkpatch.pl violation due to
putting the vf->vf_id on the same line as the dev_err. Fix this style
issue first before moving the code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice driver currently supports virtualization using Single Root IOV,
with code in the ice_sriov.c file. In the future, we plan to also
implement support for Scalable IOV, which uses slightly different
hardware implementations for some functionality.
To eventually allow this, we introduce a new ice_vf_ops structure which
will contain the basic operations that are different between the two IOV
implementations. This primarily includes logic for how to handle the VF
reset registers, as well as what to do before and after rebuilding the
VF's VSI.
Implement these ops structures and call the ops table instead of
directly calling the SR-IOV specific function. This will allow us to
easily add the Scalable IOV implementation in the future. Additionally,
it helps separate the generalized VF logic from SR-IOV specifics. This
change allows us to move the reset logic out of ice_sriov.c and into
ice_vf_lib.c without placing any Single Root specific details into the
generic file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If we fail to clear the malicious VF indication after a VF reset, the
dev_dbg message which is printed uses the local variable 'i' when it
meant to use vf->vf_id. Fix this.
Fixes: 0891c89674 ("ice: warn about potentially malicious VFs")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce the ice_vf_lib.c file along with the ice_vf_lib.h and
ice_vf_lib_private.h header files.
These files will house the generic VF structures and access functions.
Move struct ice_vf and its dependent definitions into this new header
file.
The ice_vf_lib.c is compiled conditionally on CONFIG_PCI_IOV. Some of
its functionality is required by all driver files. However, some of its
functionality will only be required by other files also conditionally
compiled based on CONFIG_PCI_IOV.
Declaring these functions used only in CONFIG_PCI_IOV files in
ice_vf_lib.h is verbose. This is because we must provide a fallback
implementation for each function in this header since it is included in
files which may not be compiled with CONFIG_PCI_IOV.
Instead, introduce a new ice_vf_lib_private.h header which verifies that
CONFIG_PCI_IOV is enabled. This header is intended to be directly
included in .c files which are CONFIG_PCI_IOV only. Add a #error
indication that will complain if the file ever gets included by another
C file on a kernel with CONFIG_PCI_IOV disabled. Add a comment
indicating the nature of the file and why it is useful.
This makes it so that we can easily define functions exposed from
ice_vf_lib.c into other virtualization files without needing to add
fallback implementations for every single function.
This begins the path to separate out generic code which will be reused
by other virtualization implementations from ice_sriov.h and ice_sriov.c
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_vc_cfg_promiscuous_mode_msg function directly checks
ICE_VIRTCHNL_VF_CAP_PRIVILEGE, instead of using the existing helper
function ice_is_vf_trusted. Switch this to use the helper function so
that all trusted checks are consistent. This aids in any potential
future refactor by ensuring consistent code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When ice_eswitch_configure fails, print an error message to make it more
obvious why VF initialization did not succeed.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_ena_vfs function and some of its sub-functions like
ice_set_per_vf_res use a "if (<function>) { <print error> ; <exit> }"
flow. This flow discards specialized errors reported by the called
function.
This style is generally not preferred as it makes tracing error sources
more difficult. It also means we cannot log the actual error received
properly.
Refactor several calls in the ice_ena_vfs function that do this to catch
the error in the 'ret' variable. Report this in the messages, and then
return the more precise error value.
Doing this reveals that ice_set_per_vf_res returns -EINVAL or -EIO in
places where -ENOSPC makes more sense. Fix these calls up to return the
more appropriate value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_set_vf_port_vlan function is located in ice_sriov.c very far
away from the other .ndo operations that it is similar to. Move this so
that its located near the other .ndo operation definitions.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The API to control the VSI spoof checking for a VF VSI has three
functions: enable, disable, and set. The set function takes the VSI and
the VF and decides whether to call enable or disable based on the
vf->spoofchk field.
In some flows, vf->spoofchk is not yet set, such as the function used to
control the setting for a VF. (vf->spoofchk is only updated after a
success).
Simplify this API by refactoring ice_vf_set_spoofchk_cfg to be
"ice_vsi_apply_spoofchk" which takes the boolean and allows all callers
to avoid having to determine whether to call enable or disable
themselves.
This matches the expected callers better, and will prevent the need to
export more than one function when this code must be called from another
file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ICE_MAX_VF_COUNT field is defined in ice_sriov.h. This count is true
for SR-IOV but will not be true for all VF implementations, such as when
the ice driver supports Scalable IOV.
Rename this definition to clearly indicate ICE_MAX_SRIOV_VFS.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
A few more macros exist in ice_sriov.h which are not used anywhere.
These can be safely removed. Note that ICE_VIRTCHNL_VF_CAP_L2 capability
is set but never checked anywhere in the driver. Thus it is also safe to
remove.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The vc_ops structure is used to allow different handlers for virtchnl
commands when the driver is in representor mode. The current
implementation uses a copy of the ops table in each VF, and modifies
this copy dynamically.
The usual practice in kernel code is to store the ops table in a
constant structure and point to different versions. This has a number of
advantages:
1. Reduced memory usage. Each VF merely points to the correct table,
so they're able to re-use the same constant lookup table in memory.
2. Consistency. It becomes more difficult to accidentally update or
edit only one op call. Instead, the code switches to the correct
able by a single pointer write. In general this is atomic, either
the pointer is updated or its not.
3. Code Layout. The VF structure can store a pointer to the table
without needing to have the full structure definition defined prior
to the VF structure definition. This will aid in future refactoring
of code by allowing the VF pointer to be kept in ice_vf_lib.h while
the virtchnl ops table can be maintained in ice_virtchnl.h
There is one major downside in the case of the vc_ops structure. Most of
the operations in the table are the same between the two current
implementations. This can appear to lead to duplication since each
implementation must now fill in the complete table. It could make
spotting the differences in the representor mode more challenging.
Unfortunately, methods to make this less error prone either add
complexity overhead (macros using CPP token concatenation) or don't work
on all compilers we support (constant initializer from another constant
structure).
The cost of maintaining two structures does not out weigh the benefits
of the constant table model.
While we're making these changes, go ahead and rename the structure and
implementations with "virtchnl" instead of "vc_vf_". This will more
closely align with the planned file renaming, and avoid similar names when
we later introduce a "vf ops" table for separating Scalable IOV and
Single Root IOV implementations.
Leave the accessor/assignment functions in order to avoid issues with
compiling with options disabled. The interface makes it easier to handle
when CONFIG_PCI_IOV is disabled in the kernel.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Several headers in the ice driver include ice.h even though they are
themselves included by that header. The most notable of these is
ice_common.h, but several other headers also do this.
Such a recursive inclusion is problematic as it forces headers to be
included in a strict order, otherwise compilation errors can result. The
circular inclusions do not trigger an endless loop due to standard
header inclusion guards, however other errors can occur.
For example, ice_flow.h defines ice_rss_hash_cfg, which is used by
ice_sriov.h as part of the definition of ice_vf_hash_ip_ctx.
ice_flow.h includes ice_acl.h, which includes ice_common.h, and which
finally includes ice.h. Since ice.h itself includes ice_sriov.h, this
creates a circular dependency.
The definition in ice_sriov.h requires things from ice_flow.h, but
ice_flow.h itself will lead to trying to load ice_sriov.h as part of its
process for expanding ice.h. The current code avoids this issue by
having an implicit dependency without the include of ice_flow.h.
If we were to fix that so that ice_sriov.h explicitly depends on
ice_flow.h the following pattern would occur:
ice_flow.h -> ice_acl.h -> ice_common.h -> ice.h -> ice_sriov.h
At this point, during the expansion of, the header guard for ice_flow.h
is already set, so when ice_sriov.h attempts to load the ice_flow.h
header it is skipped. Then, we go on to begin including the rest of
ice_sriov.h, including structure definitions which depend on
ice_rss_hash_cfg. This produces a compiler warning because
ice_rss_hash_cfg hasn't yet been included. Remember, we're just at the
start of ice_flow.h!
If the order of headers is incorrect (ice_flow.h is not implicitly
loaded first in all files which include ice_sriov.h) then we get the
same failure.
Removing this recursive inclusion requires fixing a few cases where some
headers depended on the header inclusions from ice.h. In addition, a few
other changes are also required.
Most notably, ice_hw_to_dev is implemented as a macro in ice_osdep.h,
which is the likely reason that ice_common.h includes ice.h at all. This
macro implementation requires the full definition of ice_pf in order to
properly compile.
Fix this by moving it to a function declared in ice_main.c, so that we
do not require all files to depend on the layout of the ice_pf
structure.
Note that this change only fixes circular dependencies, but it does not
fully resolve all implicit dependencies where one header may depend on
the inclusion of another. I tried to fix as many of the implicit
dependencies as I noticed, but fixing them all requires a somewhat
tedious analysis of each header and attempting to compile it separately.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_virtchnl_pf.c and ice_virtchnl_pf.h files are where most of the
code for implementing Single Root IOV virtualization resides. This code
includes support for bringing up and tearing down VFs, hooks into the
kernel SR-IOV netdev operations, and for handling virtchnl messages from
VFs.
In the future, we plan to support Scalable IOV in addition to Single
Root IOV as an alternative virtualization scheme. This implementation
will re-use some but not all of the code in ice_virtchnl_pf.c
To prepare for this future, we want to refactor and split up the code in
ice_virtchnl_pf.c into the following scheme:
* ice_vf_lib.[ch]
Basic VF structures and accessors. This is where scheme-independent
code will reside.
* ice_virtchnl.[ch]
Virtchnl message handling. This is where the bulk of the logic for
processing messages from VFs using the virtchnl messaging scheme will
reside. This is separated from ice_vf_lib.c because it is distinct
and has a bulk of the processing code.
* ice_sriov.[ch]
Single Root IOV implementation, including initialization and the
routines for interacting with SR-IOV based netdev operations.
* (future) ice_siov.[ch]
Scalable IOV implementation.
As a first step, lets assume that all of the code in
ice_virtchnl_pf.[ch] is for Single Root IOV. Rename this file to
ice_sriov.c and its header to ice_sriov.h
Future changes will further split out the code in these files following
the plan outlined here.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_sriov.c file primarily contains code which handles the logic for
mailbox overflow detection and some other utility functions related to
the virtualization mailbox.
The bulk of the SR-IOV implementation is actually found in
ice_virtchnl_pf.c, and this file isn't strictly SR-IOV specific.
In the future, the ice driver will support an additional virtualization
scheme known as Scalable IOV, and the code in this file will be used
for this alternative implementation.
Rename this file (and its associated header) to ice_vf_mbx.c, so that we
can later re-use the ice_sriov.c file as the SR-IOV specific file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support for creating filters for GTP-U and GTP-C in switchdev mode. Add
support for parsing GTP-specific options (QFI and PDU type) and TEID.
By default, a filter for GTP-U will be added. To add a filter for GTP-C,
specify enc_dst_port = 2123, e.g.:
tc filter add dev $GTP0 ingress prio 1 flower enc_key_id 1337 \
enc_dst_port 2123 action mirred egress redirect dev $VF1_PR
Note: GTP-U with outer IPv6 offload is not supported yet.
Note: GTP-U with no payload offload is not supported yet.
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
