Use an x86-specific virtio_check_mem_acc_cb() for Xen in order to setup
the correct DMA ops.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # common code
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit fa1f57421e ("xen/virtio: Enable restricted memory access using
Xen grant mappings") introduced a new requirement for using virtio
devices: the backend now needs to support the VIRTIO_F_ACCESS_PLATFORM
feature.
This is an undue requirement for non-PV guests, as those can be operated
with existing backends without any problem, as long as those backends
are running in dom0.
Per default allow virtio devices without grant support for non-PV
guests.
On Arm require VIRTIO_F_ACCESS_PLATFORM for devices having been listed
in the device tree to use grants.
Add a new config item to always force use of grants for virtio.
Fixes: fa1f57421e ("xen/virtio: Enable restricted memory access using Xen grant mappings")
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 guest using Xen
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220622063838.8854-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Instead of clearing the bss area in assembly code, use the clear_bss()
function.
This requires to pass the start_info address as parameter to
xen_start_kernel() in order to avoid the xen_start_info being zeroed
again.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220630071441.28576-2-jgross@suse.com
In order to support virtio in Xen guests add a config option XEN_VIRTIO
enabling the user to specify whether in all Xen guests virtio should
be able to access memory via Xen grant mappings only on the host side.
Also set PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS feature from the guest
initialization code on Arm and x86 if CONFIG_XEN_VIRTIO is enabled.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1654197833-25362-5-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 4d65adfcd1 ("x86: xen: insn: Decode Xen and KVM
emulate-prefix signature"), objtool is able to correctly parse the
prefixed instruction in xen_cpuid and emit correct orc unwind
information. Hence, marking the function as STACKFRAME_NON_STANDARD is
no longer needed.
This commit is basically a revert of commit 983bb6d254 ("x86/xen: Mark
xen_cpuid() stack frame as non-standard").
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20220517162425.100567-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
Even though Xen currently doesn't advertise IBT, prepare for when it
will eventually do so and sprinkle the ENDBR dust accordingly.
Even though most of the entry points are IRET like, the CPL0
Hypervisor can set WAIT-FOR-ENDBR and demand ENDBR at these sites.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.873919996@infradead.org
By doing an early rewrite of 'jmp native_iret` in
restore_regs_and_return_to_kernel() we can get rid of the last
INTERRUPT_RETURN user and paravirt_iret.
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.815039833@infradead.org
This started out with me noticing that "dom0_max_vcpus=<N>" with <N>
larger than the number of physical CPUs reported through ACPI tables
would not bring up the "excess" vCPU-s. Addressing this is the primary
purpose of the change; CPU maps handling is being tidied only as far as
is necessary for the change here (with the effect of also avoiding the
setting up of too much per-CPU infrastructure, i.e. for CPUs which can
never come online).
Noticing that xen_fill_possible_map() is called way too early, whereas
xen_filter_cpu_maps() is called too late (after per-CPU areas were
already set up), and further observing that each of the functions serves
only one of Dom0 or DomU, it looked like it was better to simplify this.
Use the .get_smp_config hook instead, uniformly for Dom0 and DomU.
xen_fill_possible_map() can be dropped altogether, while
xen_filter_cpu_maps() is re-purposed but not otherwise changed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2dbd5f0a-9859-ca2d-085e-a02f7166c610@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
There are some references to highmem left in Xen pv specific code which
can be removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211028081221.2475-4-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The flag xen_have_vcpu_info_placement was needed to support Xen
hypervisors older than version 3.4, which didn't support the
VCPUOP_register_vcpu_info hypercall. Today the Linux kernel requires
at least Xen 4.0 to be able to run, so xen_have_vcpu_info_placement
can be dropped (in theory the flag was used to ensure a working kernel
even in case of the VCPUOP_register_vcpu_info hypercall failing for
other reasons than the hypercall not being supported, but the only
cases covered by the flag would be parameter errors, which ought not
to be made anyway).
This allows to let some functions return void now, as they can never
fail.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211028072748.29862-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
- Improve retpoline code patching by separating it from alternatives which
reduces memory footprint and allows to do better optimizations in the
actual runtime patching.
- Add proper retpoline support for x86/BPF
- Address noinstr warnings in x86/kvm, lockdep and paravirtualization code
- Add support to handle pv_opsindirect calls in the noinstr analysis
- Classify symbols upfront and cache the result to avoid redundant
str*cmp() invocations.
- Add a CFI hash to reduce memory consumption which also reduces runtime
on a allyesconfig by ~50%
- Adjust XEN code to make objtool handling more robust and as a side
effect to prevent text fragmentation due to placement of the hypercall
page.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmF/GFgTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoc1JD/0Sz6seP2OUMxbMT3gCcFo9sMvYTdsM
7WuGFbBbnCIo7g8JH7k0zRRBigptMp2eUtQXKkgaaIbWN4JbuVKf8KxN5/qXxLi4
fJ12QnNTGH9N2jtzl5wKmpjaKJnnJMD9D10XwoR+T6gn6NHd+AgLEs7GxxuQUlgo
eC9oEXhNHC8uNhiZc38EwfwmItI1bRgaLrnZWIL4rYGSMxfCK1/cEOpWrFfX9wmj
/diB6oqMyPXZXMCtgpX7TniUr5XOTCcUkeO9mQv5bmyq/YM/8hrTbcVSJlsVYLvP
EsBnUSHAcfLFiHXwa1RNiIGdbiPjbN+UYeXGAvqF58f3e5dTIHtN/UmWo7OH93If
9rLMVNcMpsfPx7QRk2IxEPumLCkyfwjzfKrVDM6P6TKEIUzD1og4IK9gTlfykVsh
56G5XiCOC/X2x8IMxKTLGuBiAVLFHXK/rSwoqhvNEWBFKDbP13QWs0LurBcW09Sa
/kQI9pIBT1xFA/R+OY5Xy1cqNVVK1Gxmk8/bllCijA9pCFSCFM4hLZE5CevdrBCV
h5SdqEK5hIlzFyypXfsCik/4p/+rfvlGfUKtFsPctxx29SPe+T0orx+l61jiWQok
rZOflwMawK5lDuASHrvNHGJcWaTwoo3VcXMQDnQY0Wulc43J5IFBaPxkZzgyd+S1
4lktHxatrCMUgw==
=pfZi
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Thomas Gleixner:
- Improve retpoline code patching by separating it from alternatives
which reduces memory footprint and allows to do better optimizations
in the actual runtime patching.
- Add proper retpoline support for x86/BPF
- Address noinstr warnings in x86/kvm, lockdep and paravirtualization
code
- Add support to handle pv_opsindirect calls in the noinstr analysis
- Classify symbols upfront and cache the result to avoid redundant
str*cmp() invocations.
- Add a CFI hash to reduce memory consumption which also reduces
runtime on a allyesconfig by ~50%
- Adjust XEN code to make objtool handling more robust and as a side
effect to prevent text fragmentation due to placement of the
hypercall page.
* tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
bpf,x86: Respect X86_FEATURE_RETPOLINE*
bpf,x86: Simplify computing label offsets
x86,bugs: Unconditionally allow spectre_v2=retpoline,amd
x86/alternative: Add debug prints to apply_retpolines()
x86/alternative: Try inline spectre_v2=retpoline,amd
x86/alternative: Handle Jcc __x86_indirect_thunk_\reg
x86/alternative: Implement .retpoline_sites support
x86/retpoline: Create a retpoline thunk array
x86/retpoline: Move the retpoline thunk declarations to nospec-branch.h
x86/asm: Fixup odd GEN-for-each-reg.h usage
x86/asm: Fix register order
x86/retpoline: Remove unused replacement symbols
objtool,x86: Replace alternatives with .retpoline_sites
objtool: Shrink struct instruction
objtool: Explicitly avoid self modifying code in .altinstr_replacement
objtool: Classify symbols
objtool: Support pv_opsindirect calls for noinstr
x86/xen: Rework the xen_{cpu,irq,mmu}_opsarrays
x86/xen: Mark xen_force_evtchn_callback() noinstr
x86/xen: Make irq_disable() noinstr
...
This was effectively lost while dropping PVHv1 code. Move the function
and arrange for it to be called the same way as done in PV mode. Clearly
this then needs re-introducing the XENFEAT_mmu_pt_update_preserve_ad
check that was recently removed, as that's a PV-only feature.
Since the string pointed at by pv_info.name describes the mode, drop
"paravirtualized" from the log message while moving the code.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/de03054d-a20d-2114-bb86-eec28e17b3b8@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Without announcing hvc0 as preferred it won't get used as long as tty0
gets registered earlier. This is particularly problematic with there not
being any screen output for PVH Dom0 when the screen is in graphics
mode, as the necessary information doesn't get conveyed yet from the
hypervisor.
Follow PV's model, but be conservative and do this for Dom0 only for
now.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/582328b6-c86c-37f3-d802-5539b7a86736@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
With preferred consoles "tty" and "hvc" announced as preferred,
registering "xenboot" early won't result in use of the console: It also
needs to be registered as preferred. Generalize this from being DomU-
only so far.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/d4a34540-a476-df2c-bca6-732d0d58c5f0@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Decouple XEN_DOM0 from XEN_PV, converting some existing uses of XEN_DOM0
to a new XEN_PV_DOM0. (I'm not convinced all are really / should really
be PV-specific, but for starters I've tried to be conservative.)
For PVH Dom0 the hypervisor populates MADT with only x2APIC entries, so
without x2APIC support enabled in the kernel things aren't going to work
very well. (As opposed, DomU-s would only ever see LAPIC entries in MADT
as of now.) Note that this then requires PVH Dom0 to be 64-bit, as
X86_X2APIC depends on X86_64.
In the course of this xen_running_on_version_or_later() needs to be
available more broadly. Move it from a PV-specific to a generic file,
considering that what it does isn't really PV-specific at all anyway.
Note that xen/interface/version.h cannot be included on its own; in
enlighten.c, which uses SCHEDOP_* anyway, include xen/interface/sched.h
first to resolve the apparently sole missing type (xen_ulong_t).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/983bb72f-53df-b6af-14bd-5e088bd06a08@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The initial observation was that in PV mode under Xen 32-bit user space
didn't work anymore. Attempts of system calls ended in #GP(0x402). All
of the sudden the vector 0x80 handler was not in place anymore. As it
turns out up to 5.13 redundant initialization did occur: Once from
cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a
2nd time while each CPU was brought fully up. This 2nd initialization is
now gone, uncovering that the 1st one was flawed: Unlike for the
set_trap_table hypercall, a full virtual IDT needs to be specified here;
the "vector" fields of the individual entries are of no interest. With
many (kernel) IDT entries still(?) (i.e. at that point at least) empty,
the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus
becoming the domain's handler for vector 0x20.
Make xen_convert_trap_info() fit for either purpose, leveraging the fact
that on the xen_copy_trap_info() path the table starts out zero-filled.
This includes moving out the writing of the sentinel, which would also
have lead to a buffer overrun in the xen_copy_trap_info() case if all
(kernel) IDT entries were populated. Convert the writing of the sentinel
to clearing of the entire table entry rather than just the address
field.
(I didn't bother trying to identify the commit which uncovered the issue
in 5.14; the commit named below is the one which actually introduced the
bad code.)
Fixes: f87e4cac4f ("xen: SMP guest support")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
In order to allow objtool to make sense of all the various paravirt
functions, it needs to either parse whole pv_ops[] tables, or observe
individual assignments in the form:
bf87: 48 c7 05 00 00 00 00 00 00 00 00 movq $0x0,0x0(%rip)
bf92 <xen_init_spinlocks+0x5f>
bf8a: R_X86_64_PC32 pv_ops+0x268
As is, xen_cpu_ops[] is at offset +0 in pv_ops[] and could thus be
parsed as a 'normal' pv_ops[] table, however xen_irq_ops[] and
xen_mmu_ops[] are not.
Worse, both the latter two are compiled into the individual assignment
for by current GCC, but that's not something one can rely on.
Therefore, convert all three into full pv_ops[] tables. This has the
benefit of not needing to teach objtool about the offsets and
resulting in more conservative code-gen.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210624095149.057262522@infradead.org
XENFEAT_mmu_pt_update_preserve_ad is always set in Xen 4.0 and newer.
Remove coding assuming it might be zero.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210730071804.4302-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_setup_gdt(), via xen_load_gdt_boot(), wants to adjust page tables.
For this to work when NX is not available, x86_configure_nx() needs to
be called first.
[jgross] Note that this is a revert of 36104cb901 ("x86/xen:
Delay get_cpu_cap until stack canary is established"), which is possible
now that we no longer support running as PV guest in 32-bit mode.
Cc: <stable.vger.kernel.org> # 5.9
Fixes: 36104cb901 ("x86/xen: Delay get_cpu_cap until stack canary is established")
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/12a866b0-9e89-59f7-ebeb-a2a6cec0987a@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
There is no need any longer to have different paravirt patch functions
for native and Xen. Eliminate native_patch() and rename
paravirt_patch_default() to paravirt_patch().
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311142319.4723-15-jgross@suse.com
The iret paravirt op is rather special as it is using a jmp instead
of a call instruction. Switch it to ALTERNATIVE.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311142319.4723-12-jgross@suse.com
On 32-bit kernels, the stackprotector canary is quite nasty -- it is
stored at %gs:(20), which is nasty because 32-bit kernels use %fs for
percpu storage. It's even nastier because it means that whether %gs
contains userspace state or kernel state while running kernel code
depends on whether stackprotector is enabled (this is
CONFIG_X86_32_LAZY_GS), and this setting radically changes the way
that segment selectors work. Supporting both variants is a
maintenance and testing mess.
Merely rearranging so that percpu and the stack canary
share the same segment would be messy as the 32-bit percpu address
layout isn't currently compatible with putting a variable at a fixed
offset.
Fortunately, GCC 8.1 added options that allow the stack canary to be
accessed as %fs:__stack_chk_guard, effectively turning it into an ordinary
percpu variable. This lets us get rid of all of the code to manage the
stack canary GDT descriptor and the CONFIG_X86_32_LAZY_GS mess.
(That name is special. We could use any symbol we want for the
%fs-relative mode, but for CONFIG_SMP=n, gcc refuses to let us use any
name other than __stack_chk_guard.)
Forcibly disable stackprotector on older compilers that don't support
the new options and turn the stack canary into a percpu variable. The
"lazy GS" approach is now used for all 32-bit configurations.
Also makes load_gs_index() work on 32-bit kernels. On 64-bit kernels,
it loads the GS selector and updates the user GSBASE accordingly. (This
is unchanged.) On 32-bit kernels, it loads the GS selector and updates
GSBASE, which is now always the user base. This means that the overall
effect is the same on 32-bit and 64-bit, which avoids some ifdeffery.
[ bp: Massage commit message. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/c0ff7dba14041c7e5d1cae5d4df052f03759bef3.1613243844.git.luto@kernel.org
POPF is a rather expensive operation, so don't use it for restoring
irq flags. Instead, test whether interrupts are enabled in the flags
parameter and enable interrupts via STI in that case.
This results in the restore_fl paravirt op to be no longer needed.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210120135555.32594-7-jgross@suse.com
USERGS_SYSRET64 is used to return from a syscall via SYSRET, but
a Xen PV guest will nevertheless use the IRET hypercall, as there
is no sysret PV hypercall defined.
So instead of testing all the prerequisites for doing a sysret and
then mangling the stack for Xen PV again for doing an iret just use
the iret exit from the beginning.
This can easily be done via an ALTERNATIVE like it is done for the
sysenter compat case already.
It should be noted that this drops the optimization in Xen for not
restoring a few registers when returning to user mode, but it seems
as if the saved instructions in the kernel more than compensate for
this drop (a kernel build in a Xen PV guest was slightly faster with
this patch applied).
While at it remove the stale sysret32 remnants.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210120135555.32594-6-jgross@suse.com
SWAPGS is used only for interrupts coming from user mode or for
returning to user mode. So there is no reason to use the PARAVIRT
framework, as it can easily be replaced by an ALTERNATIVE depending
on X86_FEATURE_XENPV.
There are several instances using the PV-aware SWAPGS macro in paths
which are never executed in a Xen PV guest. Replace those with the
plain swapgs instruction. For SWAPGS_UNSAFE_STACK the same applies.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210120135555.32594-5-jgross@suse.com
Xen PV guests don't use IST. For double fault interrupts, switch to
the same model as NMI.
Correct a typo in a comment while copying it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210120135555.32594-4-jgross@suse.com
Xen PV guests don't use IST. For machine check interrupts, switch to the
same model as debug interrupts.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210120135555.32594-3-jgross@suse.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX4aNVgAKCRCAXGG7T9hj
vlrDAQDQ2qelTKKMEV9atKr0RTkHAKrhUidzlTINjFx7BIrTfQEA7TmDr3j0weQU
521+bxE803OEWElp2Qta30boXgGGXQo=
=jKt7
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- two small cleanup patches
- avoid error messages when initializing MCA banks in a Xen dom0
- a small series for converting the Xen gntdev driver to use
pin_user_pages*() instead of get_user_pages*()
- intermediate fix for running as a Xen guest on Arm with KPTI enabled
(the final solution will need new Xen functionality)
* tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: Fix typo in xen_pagetable_p2m_free()
x86/xen: disable Firmware First mode for correctable memory errors
xen/arm: do not setup the runstate info page if kpti is enabled
xen: remove redundant initialization of variable ret
xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*()
xen/gntdev.c: Mark pages as dirty
- Most of the changes are cleanups and reorganization to make the objtool code
more arch-agnostic. This is in preparation for non-x86 support.
Fixes:
- KASAN fixes.
- Handle unreachable trap after call to noreturn functions better.
- Ignore unreachable fake jumps.
- Misc smaller fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KX5o
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Most of the changes are cleanups and reorganization to make the
objtool code more arch-agnostic. This is in preparation for non-x86
support.
Other changes:
- KASAN fixes
- Handle unreachable trap after call to noreturn functions better
- Ignore unreachable fake jumps
- Misc smaller fixes & cleanups"
* tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf build: Allow nested externs to enable BUILD_BUG() usage
objtool: Allow nested externs to enable BUILD_BUG()
objtool: Permit __kasan_check_{read,write} under UACCESS
objtool: Ignore unreachable trap after call to noreturn functions
objtool: Handle calling non-function symbols in other sections
objtool: Ignore unreachable fake jumps
objtool: Remove useless tests before save_reg()
objtool: Decode unwind hint register depending on architecture
objtool: Make unwind hint definitions available to other architectures
objtool: Only include valid definitions depending on source file type
objtool: Rename frame.h -> objtool.h
objtool: Refactor jump table code to support other architectures
objtool: Make relocation in alternative handling arch dependent
objtool: Abstract alternative special case handling
objtool: Move macros describing structures to arch-dependent code
objtool: Make sync-check consider the target architecture
objtool: Group headers to check in a single list
objtool: Define 'struct orc_entry' only when needed
objtool: Skip ORC entry creation for non-text sections
objtool: Move ORC logic out of check()
...
Patch series "device-dax: Support sub-dividing soft-reserved ranges", v5.
The device-dax facility allows an address range to be directly mapped
through a chardev, or optionally hotplugged to the core kernel page
allocator as System-RAM. It is the mechanism for converting persistent
memory (pmem) to be used as another volatile memory pool i.e. the current
Memory Tiering hot topic on linux-mm.
In the case of pmem the nvdimm-namespace-label mechanism can sub-divide
it, but that labeling mechanism is not available / applicable to
soft-reserved ("EFI specific purpose") memory [3]. This series provides a
sysfs-mechanism for the daxctl utility to enable provisioning of
volatile-soft-reserved memory ranges.
The motivations for this facility are:
1/ Allow performance differentiated memory ranges to be split between
kernel-managed and directly-accessed use cases.
2/ Allow physical memory to be provisioned along performance relevant
address boundaries. For example, divide a memory-side cache [4] along
cache-color boundaries.
3/ Parcel out soft-reserved memory to VMs using device-dax as a security
/ permissions boundary [5]. Specifically I have seen people (ab)using
memmap=nn!ss (mark System-RAM as Persistent Memory) just to get the
device-dax interface on custom address ranges. A follow-on for the VM
use case is to teach device-dax to dynamically allocate 'struct page' at
runtime to reduce the duplication of 'struct page' space in both the
guest and the host kernel for the same physical pages.
[2]: http://lore.kernel.org/r/20200713160837.13774-11-joao.m.martins@oracle.com
[3]: http://lore.kernel.org/r/157309097008.1579826.12818463304589384434.stgit@dwillia2-desk3.amr.corp.intel.com
[4]: http://lore.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com
[5]: http://lore.kernel.org/r/20200110190313.17144-1-joao.m.martins@oracle.com
This patch (of 23):
In preparation for adding a new numa= option clean up the existing ones to
avoid ifdefs in numa_setup(), and provide feedback when the option is
numa=fake= option is invalid due to kernel config. The same does not need
to be done for numa=noacpi, since the capability is already hard disabled
at compile-time.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: https://lkml.kernel.org/r/160106109960.30709.7379926726669669398.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/159643094279.4062302.17779410714418721328.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/159643094925.4062302.14979872973043772305.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When running as Xen dom0 the kernel isn't responsible for selecting the
error handling mode, this should be handled by the hypervisor.
So disable setting FF mode when running as Xen pv guest. Not doing so
might result in boot splats like:
[ 7.509696] HEST: Enabling Firmware First mode for corrected errors.
[ 7.510382] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 2.
[ 7.510383] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 3.
[ 7.510384] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 4.
[ 7.510384] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 5.
[ 7.510385] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 6.
[ 7.510386] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 7.
[ 7.510386] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 8.
Reason is that the HEST ACPI table contains the real number of MCA
banks, while the hypervisor is emulating only 2 banks for guests.
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200925140751.31381-1-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Header frame.h is getting more code annotations to help objtool analyze
object files.
Rename the file to objtool.h.
[ jpoimboe: add objtool.h to MAINTAINERS ]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The last 32-bit user of stuff under CONFIG_PARAVIRT_XXL is gone.
Remove 32-bit specific parts.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200815100641.26362-2-jgross@suse.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXzaSXAAKCRCAXGG7T9hj
vuSEAP4qOIv7Hr1wMJfTsN7ZoNNr/K6ph8ADcjFm9RGikn8MawD8CU/OfcFKJFwl
UVwM1HPnRG6pvCI9bmHS4WYrIBYBVw0=
=Bi6R
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- Remove support for running as 32-bit Xen PV-guest.
32-bit PV guests are rarely used, are lacking security fixes for
Meltdown, and can be easily replaced by PVH mode. Another series for
doing more cleanup will follow soon (removal of 32-bit-only pvops
functionality).
- Fixes and additional features for the Xen display frontend driver.
* tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drm/xen-front: Pass dumb buffer data offset to the backend
xen: Sync up with the canonical protocol definition in Xen
drm/xen-front: Add YUYV to supported formats
drm/xen-front: Fix misused IS_ERR_OR_NULL checks
xen/gntdev: Fix dmabuf import with non-zero sgt offset
x86/xen: drop tests for highmem in pv code
x86/xen: eliminate xen-asm_64.S
x86/xen: remove 32-bit Xen PV guest support
With support for 32-bit pv guests gone pure pv-code no longer needs to
test for highmem. Dropping those tests removes the need for flushing
in some places.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Xen is requiring 64-bit machines today and since Xen 4.14 it can be
built without 32-bit PV guest support. There is no need to carry the
burden of 32-bit PV guest support in the kernel any longer, as new
guests can be either HVM or PVH, or they can use a 64 bit kernel.
Remove the 32-bit Xen PV support from the kernel.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The pointer bitmap is being initialized with a plain integer 0,
fix this by initializing it with a NULL instead.
Cleans up sparse warning:
arch/x86/xen/enlighten_pv.c:876:27: warning: Using plain integer
as NULL pointer
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200721100217.407975-1-colin.king@canonical.com
tss_invalidate_io_bitmap() wasn't wired up properly through the pvop
machinery, so the TSS and Xen's io bitmap would get out of sync
whenever disabling a valid io bitmap.
Add a new pvop for tss_invalidate_io_bitmap() to fix it.
This is XSA-329.
Fixes: 22fe5b0439 ("x86/ioperm: Move TSS bitmap update to exit to user work")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org
On Xen PV, #DB doesn't use IST. It still needs to be correctly routed
depending on whether it came from user or kernel mode.
Get rid of DECLARE/DEFINE_IDTENTRY_XEN -- it was too hard to follow the
logic. Instead, route #DB and NMI through DECLARE/DEFINE_IDTENTRY_RAW on
Xen, and do the right thing for #DB. Also add more warnings to the
exc_debug* handlers to make this type of failure more obvious.
This fixes various forms of corruption that happen when usermode
triggers #DB on Xen PV.
Fixes: 4c0dcd8350 ("x86/entry: Implement user mode C entry points for #DB and #MCE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/4163e733cce0b41658e252c6c6b3464f33fdff17.1593795633.git.luto@kernel.org
Convert page fault exceptions to IDTENTRY_RAW:
- Implement the C entry point with DEFINE_IDTENTRY_RAW
- Add the CR2 read into the exception handler
- Add the idtentry_enter/exit_cond_rcu() invocations in
in the regular page fault handler and in the async PF
part.
- Emit the ASM stub with DECLARE_IDTENTRY_RAW
- Remove the ASM idtentry in 64-bit
- Remove the CR2 read from 64-bit
- Remove the open coded ASM entry code in 32-bit
- Fix up the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.238455120@linutronix.de
