Digital TV devices consist of several independent hardware components
which are controlled by different drivers.
Each media device is controlled by a group of cooperating drivers with the
bridge driver as the main driver.
This patch adds a bridge driver for the Virtual Digital TV driver [vidtv].
The bridge driver binds to the other drivers, that is, vidtv_tuner and
vidtv_demod and implements the digital demux logic, providing userspace
with a MPEG Transport Stream.
The MPEG related code is split in the following way:
- vidtv_ts: code to work with MPEG TS packets, such as TS headers,
adaptation fields, PCR packets and NULL packets.
- vidtv_psi: this is the PSI generator.
PSI packets contain general information about a MPEG Transport Stream.
A PSI generator is needed so userspace apps can retrieve information
about the Transport Stream and eventually tune into a (dummy) channel.
Because the generator is implemented in a separate file, it can be
reused elsewhere in the media subsystem.
Currently vidtv supports working with 3 PSI tables:
PAT, PMT and SDT.
- vidtv_pes: implements the PES logic to convert encoder data into
MPEG TS packets. These can then be fed into a TS multiplexer and
eventually into userspace.
- vidtv_s302m: implements a S302M encoder to make it possible to
insert PCM audio data in the generated MPEG Transport Stream.
This shall enable passing an audio signal into userspace so it can be
decoded and played by media software.
- vidtv_channels: Implements a 'channel' abstraction
When vidtv boots, it will create some hardcoded channels:
Their services will be concatenated to populate the SDT.
Their programs will be concatenated to populate the PAT
For each program in the PAT, a PMT section will be created
The PMT section for a channel will be assigned its streams.
Every stream will have its corresponding encoder polled to produce TS
packets
These packets may be interleaved by the mux and then delivered to the
bridge
- vidtv_mux - Implements a MPEG TS mux, loosely based on the ffmpeg
implementation
The multiplexer is responsible for polling encoders,
interleaving packets, padding the resulting stream with NULL packets if
necessary and then delivering the resulting TS packets to the bridge
driver so it can feed the demux.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Implement a I2C demodulator driver, simulating support for DVB-T, DVB-C
and DVB-S.
This demodulator will periodically check the signal quality against a table
and drop the TS lock if it drops below a threshold value, regaining it in
the event that the signal improves.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The virtual DVB test driver serves as a reference DVB driver and helps
validate the existing APIs in the media subsystem. It can also aid
developers working on userspace applications.
This dummy tuner should support common TV standards such as DVB-T/T2/S/S2,
ISDB-T and ATSC when completed.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It sounds that earlier versions of GCC have troubles when
doing const math at compile time, if no typecast is used:
on i386:
ERROR: modpost: "__floatunsidf" [drivers/media/pci/ttpci/dvb-ttpci.ko] undefined!
ERROR: modpost: "__ltdf2" [drivers/media/pci/ttpci/dvb-ttpci.ko] undefined!
The warning was generated on gcc (SUSE Linux) 7.5.0.
Gcc 9.2 compiles it fine.
As an added bonus, it also fixes this objtool warning:
drivers/media/pci/ttpci/av7110_v4l.c:163:11: error: SSE register return with SSE disabled
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
OV8856 supports 3264x2448 @ 30 FPS, which is added
in this commit.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
OV8856 supports 1632x1224 @ 60 FPS, which is added
in this commit.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document that it is possible to provide defaults for multiple bus types to
v4l2_fwnode_endpoint_parse and v4l2_fwnode_endpoint_alloc_parse. Also
underline the fact that detecting the bus type without bus-type property
is only for the old drivers.
Also correct capitalisation of BT.656.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The bus specific parameters were a union. This made providing bus specific
defaults impossible as the memory used to store the defaults for multiple
different busses was the same.
Make it struct instead. It's not large so the size isn't really an issue.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The maximum is currently four (4). No short is needed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
v4l2_async_notifier_add_subdev() requires the asd to be allocated
dynamically, but the max9286 driver embeds it in the max9286_source
structure. This causes memory corruption when the notifier is destroyed
at remove time with v4l2_async_notifier_cleanup().
Fix this issue by registering the asd with
v4l2_async_notifier_add_fwnode_subdev(), which allocates it dynamically
internally. A new max9286_asd structure is introduced, to store a
pointer to the corresonding max9286_source that needs to be accessed
from bound and unbind callbacks. There's no need to take an extra
explicit reference to the fwnode anymore as
v4l2_async_notifier_add_fwnode_subdev() does so internally.
While at it, use %u instead of %d to print the unsigned index in the
error message from the v4l2_async_notifier_add_fwnode_subdev() error
path.
Fixes: 66d8c9d242 ("media: i2c: Add MAX9286 driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
v4l2_async_notifier_add_subdev() requires the asd to be allocated
dynamically, but the rcar-csi2 driver embeds it in the rcar_csi2
structure. This causes memory corruption when the notifier is destroyed
at remove time with v4l2_async_notifier_cleanup().
Fix this issue by registering the asd with
v4l2_async_notifier_add_fwnode_subdev(), which allocates it dynamically
internally.
Fixes: 769afd212b ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
v4l2_async_notifier_add_subdev() requires the asd to be allocated
dynamically, but the rcar-drif driver embeds it in the
rcar_drif_graph_ep structure. This causes memory corruption when the
notifier is destroyed at remove time with v4l2_async_notifier_cleanup().
Fix this issue by registering the asd with
v4l2_async_notifier_add_fwnode_subdev(), which allocates it dynamically
internally.
Fixes: d079f94c90 ("media: platform: Switch to v4l2_async_notifier_add_subdev")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The fwnode reference corresponding to the endpoint is leaked in an error
path of the rcar_drif_parse_subdevs() function. Fix it, and reorganize
fwnode reference handling in the function to release references early,
simplifying error paths.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2_async_notifier_add_subdev() function requires the asd pointer
it receives to be allocated dynamically, but doesn't explicitly say so.
Only one driver out of 13 get its right (atmel-sama5d2-isc.c, but with
memory leaks in the error paths), clearly showing we have an issue.
Update the v4l2_async_notifier_add_subdev() documentation to clearly
state the allocation requirement. Whether this will be enough to avoid
new offending code isn't certain, but it's a good first step
nonetheless.
Fixes: 9ca4653121 ("media: v4l: fwnode: Support generic parsing of graph endpoints in a device")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
During testing this sensor on iW-RainboW-G21D-Qseven platform in 8-bit DVP
mode with rcar-vin bridge noticed the capture worked fine for the first run
(with yavta), but for subsequent runs the bridge driver waited for the
frame to be captured. Debugging further noticed the data lines were
enabled/disabled in stream on/off callback and dumping the register
contents 0x3017/0x3018 in ov5640_set_stream_dvp() reported the correct
values, but yet frame capturing failed.
To get around this issue data lines are enabled in s_power callback.
(Also the sensor remains in power down mode if not streaming so power
consumption shouldn't be affected)
Fixes: f22996db44 ("media: ov5640: add support of DVP parallel interface")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation for adding DVP configuration in s_power callback
move mipi configuration into separate function
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Keep the sensor in software power down mode and wake up only in
ov5640_set_stream_dvp() callback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
pr_info() was accidentally used to print the link frequencies whereas the
rest of the information is printed on debug level. Fix that by using
pr_debug() also for link frequencies.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Alan Chiang's e-mail address no longer works. Remove it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Update Copyright year to cover the previous changes and at the same time
address indentation issues.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are assignments inside the functions which are useless.
Drop them for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
pcim_iomap_table() won't fail if previous pcim_iomap_regions() hasn't.
Since we check pcim_iomap_regions() for failure the check close to
pcim_iomap_table() is bogus and not needed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It's unclear why driver repeats the code from PCI core.
Drop it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We may use special helper macro to poll IO till condition or timeout
occurs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Refactor cio2_buffer_done() to get rid of infinite loop by replacing it by
one with clear exit condition. This change also allows to check for an
error ahead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are few nice macros in pfn.h, some of which we may use here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It's quite unlikely that another page size will be supported,
but in any case there is still an inconsistency between custom
page size definition and generic macros used in the driver.
Switch over to the generic PAGE_SIZE for sake of the consistency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This constant is used in several places in the code, define it
for better maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The code looks more nicer if we use:
while (i--)
instead:
for (i = i - 1; i >= 0; i--)
This would also allow making 'i' unsigned again.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When devm_ioremap_resource() fails, isp should be
freed just like other error paths in isp_probe.
Fixes: 8644cdf972 ("[media] omap3isp: Replace many MMIO regions by two")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The intent here is to reset the whole 'scaler_coeffs_luma' array, not just
the first element.
Fixes: e11110a5b7 ("media: staging/intel-ipu3: css: Compute and program ccs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Color Matching Descriptor has been present in USB cameras since
the original version of UVC, but it has never been fully exposed
in Linux.
This change informs V4L2 of all of the UVC colorspace parameters:
color primaries, transfer characteristics, and YCbCr encoding.
videodev2.h doesn't have values for all the possible UVC color settings,
so it is mapped as closely as possible.
Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
bFrameIndex and bFormatIndex can be negotiated by the camera during
probing, resulting in the camera choosing a different format than
expected. v4l2 can already accommodate such changes, but the code was
not updating the proper fields.
Without such a change, v4l2 would potentially interpret the payload
incorrectly, causing corrupted output. This was happening on the
Elgato HD60 S+, which currently always renegotiates to format 1.
As an aside, the Elgato firmware is buggy and should not be renegotating,
but it is still a valid thing for the camera to do. Both macOS and Windows
will properly probe and read uncorrupted images from this camera.
With this change, both qv4l2 and chromium can now read uncorrupted video
from the Elgato HD60 S+.
[Add blank lines, remove periods at the of messages]
Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
UBSAN reports a shift-out-of-bounds warning in uvc_get_le_value(). The
report is correct, but the issue should be harmless as the computed
value isn't used when the shift is negative. This may however cause
incorrect behaviour if a negative shift could generate adverse side
effects (such as a trap on some architectures for instance).
Regardless of whether that may happen or not, silence the warning as a
full WARN backtrace isn't nice.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Fixes: c0efd23292 ("V4L/DVB (8145a): USB Video Class driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes the following coccinelle report:
drivers/media/usb/uvc/uvc_ctrl.c:1860:5-11:
ERROR: invalid reference to the index variable of the iterator on line 1854
by adding a boolean variable to check if the loop has found the
Found using - Coccinelle (http://coccinelle.lip6.fr)
[Replace cursor variable with bool found]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is only 1 error exit in uvc_ctrl_add_info(), so using goto style
error handling is not necessary. Also the kfree(ctrl->uvc_data) on error
is not necessary, because the only error exit is for the kzalloc() of
ctrl->uvc_data failing.
Remove all the error handling cruft and simply do "return -ENOMEM" on
kzalloc() failure.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
uvc_ctrl_add_info() calls uvc_ctrl_get_flags() which will override
the fixed-up flags set by uvc_ctrl_fixup_xu_info().
uvc_ctrl_init_xu_ctrl() already calls uvc_ctrl_get_flags() before
calling uvc_ctrl_add_info(), so the uvc_ctrl_get_flags() call in
uvc_ctrl_add_info() is not necessary for xu ctrls.
This commit moves the uvc_ctrl_get_flags() call for normal controls
from uvc_ctrl_add_info() to uvc_ctrl_init_ctrl(), so that we no longer
call uvc_ctrl_get_flags() twice for xu controls and so that we no longer
override the fixed-up flags set by uvc_ctrl_fixup_xu_info().
This fixes the xu motor controls not working properly on a Logitech
046d:08cc, and presumably also on the other Logitech models which have
a quirk for this in the uvc_ctrl_fixup_xu_info() function.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The media controller core prints a warning when an entity is registered
without a function being set. This affects the uvcvideo driver, as the
warning was added without first addressing the issue in existing
drivers. The problem is harmless, but unnecessarily worries users. Fix
it by mapping UVC entity types to MC entity functions as accurately as
possible using the existing functions.
Fixes: b50bde4e47 ("[media] v4l2-subdev: use MEDIA_ENT_T_UNKNOWN for new subdevs")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add HEVC GUID and assotiate with HEVC pixel format so that frame
based format descriptors recognized by the UVC video driver.
Signed-off-by: Dmitry Buzdyk <dima.buzdyk@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The formula (2) is to convert from SOF to host clock,
it should be fix as
"TS = ((TS2 - TS1) * SOF + TS1 * SOF2 - TS2 * SOF1) / (SOF2 - SOF1)"
Signed-off-by: Jun Chen <jun.chen@vatics.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since commit 9495b7e92f ("driver core: platform: Initialize dma_parms
for platform devices"), struct platform_device already provides a
dma_parms structure, so we can save allocating another one.
Also the DMA segment size is simply a size, not a bitmask.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To quote the TODO of this driver:
--------------------------------------------------------------
The driver is deprecated and scheduled for removal by the end
of 2020.
In order to prevent removal the following actions would have to
be taken:
- clean up the code
- convert to the vb2 framework
- fix the disconnect and free-on-last-user handling (i.e., add
a release callback for struct v4l2_device and rework the code
to use that correctly).
--------------------------------------------------------------
Nobody picked this up, so it's time to retire this driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix this warning:
vivid-core.c: In function 'vivid_create_devnodes':
vivid-core.c:1318:11: warning: unused variable 'i' [-Wunused-variable]
1318 | int ret, i;
| ^
and this error:
vivid-core.c: In function 'vivid_create_instance':
vivid-core.c:1885:47: error: 'cec_tx_bus_cnt' undeclared (first use in this function)
1885 | ret = vivid_create_devnodes(pdev, dev, inst, cec_tx_bus_cnt,
| ^~~~~~~~~~~~~~
vivid-core.c:1885:47: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
+n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
Z6t4/DA=
=bcA4
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc4' into patchwork
Linux 5.9-rc4
* tag 'v5.9-rc4': (1001 commits)
Linux 5.9-rc4
io_uring: fix linked deferred ->files cancellation
io_uring: fix cancel of deferred reqs with ->files
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
...
There are some warnings reported by gcc:
drivers/staging/media/atomisp//pci/atomisp_compat_css20.c:164:2: warning: function ‘atomisp_css2_dbg_print’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
drivers/staging/media/atomisp//pci/atomisp_compat_css20.c:170:2: warning: function ‘atomisp_css2_dbg_ftrace_print’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
drivers/staging/media/atomisp//pci/atomisp_compat_css20.c:170:2: warning: function ‘atomisp_css2_dbg_ftrace_print’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
drivers/staging/media/atomisp//pci/atomisp_compat_css20.c:176:2: warning: function ‘atomisp_css2_err_print’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
drivers/staging/media/atomisp/pci/sh_css.c:1685:16: warning: assignment left-hand side might be a candidate for a format attribute [-Wsuggest-attribute=format]
That are due to the usage of printf-like messages without
enabling the error checking logic.
Add the proper attributes in order to shut up such warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Gcc reports that input_formatter_alignment is not used:
In file included from ./drivers/staging/media/atomisp//pci/hive_isp_css_include/input_formatter.h:34,
from drivers/staging/media/atomisp//pci/runtime/debug/src/ia_css_debug.c:55:
./drivers/staging/media/atomisp//pci/hive_isp_css_common/host/input_formatter_local.h:118:27: warning: ‘input_formatter_alignment’ defined but not used [-Wunused-const-variable=]
However, it is, but only inside input_formatter.c.
So, move it out of the header file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
