When updating the global block reserve, we account for the 6 items needed
by an unlink operation and the 6 delayed references for each one of those
items. However the calculation for the delayed references is not correct
in case we have the free space tree enabled, as in that case we need to
touch the free space tree as well and therefore need twice the number of
bytes. So use the btrfs_calc_delayed_ref_bytes() helper to calculate the
number of bytes need for the delayed references at
btrfs_update_global_block_rsv().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of hard coding the number of metadata units for an unlink operation
in a couple places, define a macro and use it instead. This eliminates the
problem of one place getting out of sync with the other, such as recently
fixed by the previous patch in the series ("btrfs: fix calculation of the
global block reserve's size").
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_update_global_block_rsv(), we are assuming an unlink operation
uses 5 metadata units, but that's not true anymore, it uses 6 since the
commit bca4ad7c0b ("btrfs: reserve correct number of items for unlink
and rmdir"). So update the code and comments to consider 6 units.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When evicting an inode, we are incorrectly calculating the amount of space
required for a single delayed reference in case the free space tree is
enabled. We have to multiply by 2 the result of
btrfs_calc_insert_metadata_size(). We should be calculating according to
the size update and space release of the delayed block reserve logic at
btrfs_update_delayed_refs_rsv() and btrfs_delayed_refs_rsv_release().
Fix this by using the btrfs_calc_delayed_ref_bytes() helper at
evict_refill_and_join() instead of btrfs_calc_insert_metadata_size().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of duplicating the logic for calculating how much space is
required for a given number of delayed references, add an inline helper
to encapsulate that logic and use it everywhere we are calculating the
space required.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_calc_insert_metadata_size() can take a const fs_info
argument, make the fs_info argument of calc_reclaim_items_nr() and of
calc_delayed_refs_nr() const as well.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info argument of the helpers btrfs_calc_insert_metadata_size() and
btrfs_calc_metadata_size() is not modified so it can be const. This will
also allow a new helper function in one of the next patches to have its
fs_info argument as const.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When flushing a limited number of delayed references (FLUSH_DELAYED_REFS_NR
state), we are assuming each delayed reference is holding a number of bytes
matching the needed space for inserting for a single metadata item (the
result of btrfs_calc_insert_metadata_size()). That is not correct when
using the free space tree, as in that case we have to multiply that value
by 2 since we need to touch the free space tree as well. This is the same
computation as we do at btrfs_update_delayed_refs_rsv() and at
btrfs_delayed_refs_rsv_release().
So correct the computation for the amount of delayed references we need to
flush in case we have the free space tree. This does not fix a functional
issue, instead it makes the flush code flush less delayed references, only
the minimum necessary to satisfy a ticket.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When refilling the delayed block reserve we are incorrectly computing the
amount of bytes for a single delayed reference if the free space tree is
being used. In that case we should double the calculated amount.
Everywhere else we compute the correct amount, like when updating the
delayed block reserve, at btrfs_update_delayed_refs_rsv(), or when
releasing space from the delayed block reserve, at
btrfs_delayed_refs_rsv_release().
So fix btrfs_delayed_refs_rsv_refill() to multiply the amount of bytes for
a single delayed reference by two in case the free space tree is used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During inode eviction, if we are truncating a deleted inode, we don't add
delayed items for our inode, so there's no need to throttle on delayed
items on each iteration of the loop that truncates inode items from its
subvolume tree. But we dirty extent buffers from its subvolume tree, so
we only need to throttle on btree inode dirty pages.
So use btrfs_btree_balance_dirty_nodelay() in the loop that truncates
inode items.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this logic encapsulated in btrfs_should_throttle_delayed_refs()
where we try to estimate if running the current amount of delayed
references we have will take more than half a second, and if so, the
caller btrfs_should_throttle_delayed_refs() should do something to
prevent more and more delayed refs from being accumulated.
This logic was added in commit 0a2b2a844a ("Btrfs: throttle delayed
refs better") and then further refined in commit a79b7d4b3e ("Btrfs:
async delayed refs"). The idea back then was that the caller of
btrfs_should_throttle_delayed_refs() would release its transaction
handle (by calling btrfs_end_transaction()) when that function returned
true, then btrfs_end_transaction() would trigger an async job to run
delayed references in a workqueue, and later start/join a transaction
again and do more work.
However we don't run delayed references asynchronously anymore, that
was removed in commit db2462a6ad ("btrfs: don't run delayed refs in
the end transaction logic"). That makes the logic that tries to estimate
how long we will take to run our current delayed references, at
btrfs_should_throttle_delayed_refs(), pointless as we don't take any
action to run delayed references anymore. We do have other type of
throttling, which consists of checking the size and reserved space of
the delayed and global block reserves, as well as if fluhsing delayed
references for the current transaction was already started, etc - this
is all done by btrfs_should_end_transaction(), and the only user of
btrfs_should_throttle_delayed_refs() does periodically call
btrfs_should_end_transaction().
So remove btrfs_should_throttle_delayed_refs() and the infrastructure
that keeps track of the average time used for running delayed references,
as well as adapting btrfs_truncate_inode_items() to call
btrfs_check_space_for_delayed_refs() instead.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_block_rsv_refill(), there's no point in initializing the
'num_bytes' variable to 0 and then, after taking the block reserve's
spinlock, initializing it to the value of the 'min_reserved' parameter.
So just get rid of the 'num_bytes' local variable and rename the
'min_reserved' parameter to 'num_bytes'.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_truncate_inode_items(), in the while loop when we decide that we
are going to delete an item, it's pointless to check that 'pending_del_nr'
is non-zero in an else clause because the corresponding if statement is
checking if 'pending_del_nr' has a value of zero. So just remove that
condition from the else clause.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When reserving metadata space for delalloc (and direct IO too), at
btrfs_delalloc_reserve_metadata(), there's no need to count the number of
extents while holding the inode's spinlock, since that does not require
access to any field of the inode.
This section of code can be called concurrently, when we have direct IO
writes against different file ranges that don't increase the inode's
i_size, so it's beneficial to shorten the critical section by counting
the number of extents before taking the inode's spinlock.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only caller of btrfs_make_block_group() always passes 0 as the value
for the bytes_used argument, so remove it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function should_end_transaction() is very short and only has one
caller, which is btrfs_should_end_transaction(). So move the code from
should_end_transaction() into btrfs_should_end_transaction().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_should_throttle_delayed_refs() returns 1 or 2 in case the
delayed refs should be throttled, however the only caller (inode eviction
and truncation path) does not care about those two different conditions,
it treats the return value as a boolean. This allows us to remove one of
the conditions in btrfs_should_throttle_delayed_refs() and change its
return value from 'int' to 'bool'. So just do that.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At space-info.c:__reserve_bytes(), instead of initializing 'ret' to 0 when
it's declared and then shortly after set it to -ENOSPC under the space
info's spinlock, initialize it to -ENOSPC when declaring it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When reserving space, at space-info.c:__reserve_bytes(), we assert that
either the current task is not holding a transacion handle, or, if it is,
that the flush method is not BTRFS_RESERVE_FLUSH_ALL. This is because that
flush method can trigger transaction commits, and therefore could lead to
a deadlock.
However there are other 2 flush methods that can trigger transaction
commits:
1) BTRFS_RESERVE_FLUSH_ALL_STEAL
2) BTRFS_RESERVE_FLUSH_EVICT
So update the assertion to check the flush method is also not one those
two methods if the current task is holding a transaction handle.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The BTRFS_RESERVE_FLUSH_EVICT flush method can also commit transactions,
see the definition of the evict_flush_states const array at space-info.c,
but the documentation for it at space-info.h does not mention it.
So update the documentation.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The block reserve passed to btrfs_block_rsv_check() is never NULL, so
remove the check. In case it can ever become NULL in the future, then
we'll get a pretty obvious and clear NULL pointer dereference crash and
stack trace.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_delayed_refs_rsv_refill(), we are passing a value of 0 to the
'update_size' argument of btrfs_block_rsv_add_bytes(), which is defined
as a boolean. Functionally this is fine because a 0 is, implicitly,
converted to a boolean false value. However it's easier to read an
explicit 'false' value, so just pass 'false' instead of 0.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The last argument of btrfs_block_rsv_migrate() is a boolean, but we are
passing an integer, with a value of 1, to it at evict_refill_and_join().
While this is not a bug, due to type conversion, it's a lot more clear to
simply pass the boolean true value instead. So just do that.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not used anywhere at the moment, but it was used in earlier version
of a patch that removed its use in the second version. So just remove
btrfs_lru_cache_is_full().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_add_compressed_bio_pages is needlessly complicated. Instead
of iterating over the logic disk offset just to add pages to the bio
use a simple offset starting at 0, which also removes most of the
claiming. Additionally __bio_add_pages already takes care of the
assert that the bio is always properly sized, and btrfs_submit_bio
called right after asserts that the bio size is non-zero.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adding pages to a bio has nothing to do with the sector. Move the
assignment to the two callers in preparation for cleaning up
btrfs_add_compressed_bio_pages.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, /sys/fs/btrfs/<UUID>/bg_reclaim_threshold is limited to 0
(disable) or [50 .. 100]%, so we need to fill 50% of a device to start the
auto reclaim process. It is cumbersome to do so when we want to shake out
possible race issues of normal write vs reclaim.
Relax the threshold check under the BTRFS_DEBUG option.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_split_bio expects a btrfs_bio as argument and always allocates one.
Type both the orig_bio argument and the return value as struct btrfs_bio
to improve type safety.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Return the containing struct btrfs_bio instead of the less type safe
struct bio from btrfs_bio_alloc.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio in struct btrfs_bio_ctrl must be a btrfs_bio, so store a pointer
to the btrfs_bio for better type checking.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_bio now has an always valid inode pointer that can be used
to find the inode in submit_one_bio, so use that and initialize all
variables for which it is possible at declaration time.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The original bio must be a btrfs_bio, so store a pointer to the
btrfs_bio for better type checking.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_submit_compressed_read expects the bio passed to it to be embedded
into a btrfs_bio structure. Pass the btrfs_bio directly to increase type
safety and make the code self-documenting.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_submit_bio expects the bio passed to it to be embedded into a
btrfs_bio structure. Pass the btrfs_bio directly to increase type
safety and make the code self-documenting.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
All algorithms have to fill the remainder of the orig_bio with zeroes,
so do it in common code.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_encoded_read_regular_fill_pages has a pretty odd control flow.
Unwind it so that there is a single loop over the pages array.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode and file_offset members in struct btrfs_encoded_read_private
are unused, so remove them.
Last used in commit 7959bd4411 ("btrfs: remove the start argument to
check_data_csum and export") and commit 7609afac67 ("btrfs: handle
checksum validation and repair at the storage layer").
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The DREW lock uses percpu variable to track lock counters and for that
it needs to allocate the structure. In btrfs_read_tree_root() or
btrfs_init_fs_root() this may add another error case or requires the
NOFS scope protection.
One way is to preallocate the structure as was suggested in
https://lore.kernel.org/linux-btrfs/20221214021125.28289-1-robbieko@synology.com/
We may avoid the allocation altogether if we don't use the percpu
variables but an atomic for the writer counter. This should not make any
difference, the DREW lock is used for truncate and NOCOW writes along
with other IO operations.
The percpu counter for writers has been there since the original commit
8257b2dc3c "Btrfs: introduce btrfs_{start, end}_nocow_write() for
each subvolume". The reason could be to avoid hammering the same
cacheline from all the readers but then the writers do that anyway.
Signed-off-by: David Sterba <dsterba@suse.com>
If no discard mount option is specified, including the NODISCARD option,
we make the async discard the default option then we don't have to call
the clear_opt again to clear the NODISCARD flag. Though this makes no
difference, that the call is redundant has been pointed out several
times so we better remove it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS_FEATURE_INCOMPAT_SUPP is defined twice, once under
CONFIG_BTRFS_DEBUG and once without it, resulting in repetitive code. The
reason for this is to add experimental features under CONFIG_BTRFS_DEBUG.
To avoid repetitive code, add a common list BTRFS_FEATURE_INCOMPAT_SUPP_STABLE,
and append experimental features only under CONFIG_BTRFS_DEBUG.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to pass the roots as arguments, reading them from the
rb-tree is cheap. Thus there is really not much need to pre-fetch it
and pass it all the way from scrub_stripe().
And we already have more than enough arguments in scrub_simple_mirror()
and scrub_simple_stripe(), it's better to remove them and only grab
those roots in scrub_simple_mirror().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The variable @path is no longer passed into any call sites after commit
18d30ab961 ("btrfs: scrub: use scrub_simple_mirror() to handle RAID56
data stripe scrub"), thus we can remove the variable completely.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Currently btrfs can use dev-replace device as an extra mirror for
read-repair. But it can lead to NODATASUM corruption in the following
case:
There is a RAID1 data chunk, and dev-replace is running from
dev2 to dev0.
|//| = Replaced data
X X+1MB X+2MB
Dev 2: | | | <- Source dev
Dev 0: |///////| | <- Target dev
Then a read on dev 2 X+2MB happens.
And something wrong happened inside devid 2, causing an -EIO.
In that case, read-repair would try the next mirror, and since we can
use target device as an extra mirror, we will use that mirror instead.
But unfortunately since the read is beyond the current replace cursor,
we should not trust it at all, what we get would be just uninitialized
garbage.
But if this read is for NODATASUM range, then we just trust them and
cause data corruption.
[CAUSE]
We used to have some checks to make sure we only return such extra
mirror when the range is before our left cursor.
The first commit introducing this behavior is ad6d620e2a ("Btrfs:
allow repair code to include target disk when searching mirrors").
But later a fix, 22ab04e814 ("Btrfs: fix race between device replace
and chunk allocation") changed the behavior, to always let
btrfs_map_block() include the extra mirror to address a race in
dev-replace which can cause missing writes to target device.
This means, we lose the tracking of cursor for the extra mirror, thus
can lead to above corruption.
[FIX]
The extra mirror is never a reliable one, at the beginning of
dev-replace, the reliability is zero, while only at the end of the
replace it's a fully reliable mirror.
We either do the complex tracking, or never trust it.
IMHO it's much easier to maintain if we don't trust it at all, and the
extra mirror can only benefit for a limited period of time (during
replace).
Thus this patch would completely remove the ability to use target device
as an extra mirror.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently open_ctree() still uses two variables for error handling, err
and ret. This can be confusing and missing some errors and does not
conform to current coding style.
This patch will fix the problems by:
- Use only ret for error handling
- Add proper ret assignment
Originally we rely on the default value (-EINVAL) of err to handle
errors, but that doesn't really reflects the error.
This will change it use the correct error number for the following
call sites:
* subpage_info allocation
* btrfs_free_extra_devids()
* btrfs_check_rw_degradable()
* cleaner_kthread allocation
* transaction_kthread allocation
- Add an extra ASSERT()
To make sure we error out instead of returning 0.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a bio_offset variable for the current offset into the bio
instead of recalculating it over and over. Remove the now only used
once search_len and sector_offset variables, and reduce the scope for
count and cur_disk_bytenr.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need to search for a file offset in a bio, it is now always
provided in bbio->file_offset (set at bio allocation time since
0d495430db ("btrfs: set bbio->file_offset in alloc_new_bio")). Just
use that with the offset into the bio.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nowadays calc_bio_boundaries() is a relatively simple function that only
guarantees the one bio equals to one ordered extent rule for uncompressed
Zone Append bios.
Sink it into it's only caller alloc_new_bio().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bio_add_page always adds either the entire range passed to it or nothing.
Based on that btrfs_bio_add_page can only return a length smaller than
the passed in one when hitting the ordered extent limit, which can only
happen for writes. Given that compressed writes never even use this code
path, this means that all the special cases for compressed extent offset
handling are dead code.
Reflow submit_extent_page to take advantage of this by inlining
btrfs_bio_add_page and handling the ordered extent limit by decrementing
it for each added range and thus significantly simplifying the loop.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Different loop iterations in btrfs_bio_add_page not only have the same
contiguity parameters, but also any non-initial operation operates on a
fresh bio anyway.
Factor out the contiguity check into a new btrfs_bio_is_contig and only
call it once in submit_extent_page before descending into the
bio_add_page loop.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove the has_error and saved_ret variables, and just jump to a goto
label for error handling from the only place returning an error from the
main loop.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
