Replace generic_splice_sendpage() + splice_from_pipe + pipe_to_sendpage()
with a net-specific handler, splice_to_socket(), that calls sendmsg() with
MSG_SPLICE_PAGES set instead of calling ->sendpage().
MSG_MORE is used to indicate if the sendmsg() is expected to be followed
with more data.
This allows multiple pipe-buffer pages to be passed in a single call in a
BVEC iterator, allowing the processing to be pushed down to a loop in the
protocol driver. This helps pave the way for passing multipage folios down
too.
Protocols that haven't been converted to handle MSG_SPLICE_PAGES yet should
just ignore it and do a normal sendmsg() for now - although that may be a
bit slower as it may copy everything.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow MSG_SPLICE_PAGES to be specified to sendmsg() but treat it as normal
sendmsg for now. This means the data will just be copied until
MSG_SPLICE_PAGES is handled.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is necessary to allow MSG_SENDPAGE_* to be passed into ->sendmsg() to
allow sendmsg(MSG_SPLICE_PAGES) to replace ->sendpage(). Unblocking them
in the network protocol, however, allows these flags to be passed in by
userspace too[1].
Fix this by marking MSG_SENDPAGE_NOPOLICY, MSG_SENDPAGE_NOTLAST and
MSG_SENDPAGE_DECRYPTED as internal flags, which causes sendmsg() to object
if they are passed to sendmsg() by userspace. Network protocol ->sendmsg()
implementations can then allow them through.
Note that it should be possible to remove MSG_SENDPAGE_NOTLAST once
sendpage is removed as a whole slew of pages will be passed in in one go by
splice through sendmsg, with MSG_MORE being set if it has more data waiting
in the pipe.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/20230526181338.03a99016@kernel.org/ [1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_mtu_probe() is still copying payload from skbs in the write queue,
using skb_copy_bits(), ignoring potential errors.
Modern TCP stack wants to only deal with payload found in page frags,
as this is a prereq for TCPDirect (host stack might not have access
to the payload)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230607214113.1992947-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Support 4 ports VF LAG, part 2/2
2) Few extra trivial cleanup patches
Shay Drory Says:
================
Support 4 ports VF LAG, part 2/2
This series continues the series[1] "Support 4 ports VF LAG, part1/2".
This series adds support for 4 ports VF LAG (single FDB E-Switch).
This series of patches refactoring LAG code that make assumptions
about VF LAG supporting only two ports and then enable 4 ports VF LAG.
Patch 1:
- Fix for ib rep code
Patches 2-5:
- Refactors LAG layer.
Patches 6-7:
- Block LAG types which doesn't support 4 ports.
Patch 8:
- Enable 4 ports VF LAG.
This series specifically allows HCAs with 4 ports to create a VF LAG
with only 4 ports. It is not possible to create a VF LAG with 2 or 3
ports using HCAs that have 4 ports.
Currently, the Merged E-Switch feature only supports HCAs with 2 ports.
However, upcoming patches will introduce support for HCAs with 4 ports.
In order to activate VF LAG a user can execute:
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink dev eswitch set pci/0000:08:00.1 mode switchdev
devlink dev eswitch set pci/0000:08:00.2 mode switchdev
devlink dev eswitch set pci/0000:08:00.3 mode switchdev
ip link add name bond0 type bond
ip link set dev bond0 type bond mode 802.3ad
ip link set dev eth2 master bond0
ip link set dev eth3 master bond0
ip link set dev eth4 master bond0
ip link set dev eth5 master bond0
Where eth2, eth3, eth4 and eth5 are net-interfaces of pci/0000:08:00.0
pci/0000:08:00.1 pci/0000:08:00.2 pci/0000:08:00.3 respectively.
User can verify LAG state and type via debugfs:
/sys/kernel/debug/mlx5/0000\:08\:00.0/lag/state
/sys/kernel/debug/mlx5/0000\:08\:00.0/lag/type
[1]
https://lore.kernel.org/netdev/20230601060118.154015-1-saeed@kernel.org/T/#mf1d2083780970ba277bfe721554d4925f03f36d1
================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmSA7/0ACgkQSD+KveBX
+j4faQgApm14Id8QTB0rSj9tO1tJFtSgCcpDN9DtyYWuq3B0rGW9CPC1rPdaFOlt
xst7PtEaCiJu7a7dwlH/kFLSAlXpZHdUZA+VG8JF0aYV8qOV/0R0xQKZgP68kwkn
vFZqZCzA1vR6egK3AweAjKAVaqDKSSKVlFGXJGzyNpGMWpGEEKodlZKCH7Jd580F
UFhCqbyY8vccMUa3cvrLVjePUjdM1xxsLKHWmYXTaN2NkoLvOYXnXThElu7skm96
Uqv8B9t2FoojZPBxgiJtoGKZ516+1dozORq7ioQug3oG9P/vpTY5QnTMKSZpJUTH
5cdSCdqii4UDPqfe0PtdEdE1O2aWig==
=A44p
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-06-06
1) Support 4 ports VF LAG, part 2/2
2) Few extra trivial cleanup patches
Shay Drory Says:
================
Support 4 ports VF LAG, part 2/2
This series continues the series[1] "Support 4 ports VF LAG, part1/2".
This series adds support for 4 ports VF LAG (single FDB E-Switch).
This series of patches refactoring LAG code that make assumptions
about VF LAG supporting only two ports and then enable 4 ports VF LAG.
Patch 1:
- Fix for ib rep code
Patches 2-5:
- Refactors LAG layer.
Patches 6-7:
- Block LAG types which doesn't support 4 ports.
Patch 8:
- Enable 4 ports VF LAG.
This series specifically allows HCAs with 4 ports to create a VF LAG
with only 4 ports. It is not possible to create a VF LAG with 2 or 3
ports using HCAs that have 4 ports.
Currently, the Merged E-Switch feature only supports HCAs with 2 ports.
However, upcoming patches will introduce support for HCAs with 4 ports.
In order to activate VF LAG a user can execute:
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink dev eswitch set pci/0000:08:00.1 mode switchdev
devlink dev eswitch set pci/0000:08:00.2 mode switchdev
devlink dev eswitch set pci/0000:08:00.3 mode switchdev
ip link add name bond0 type bond
ip link set dev bond0 type bond mode 802.3ad
ip link set dev eth2 master bond0
ip link set dev eth3 master bond0
ip link set dev eth4 master bond0
ip link set dev eth5 master bond0
Where eth2, eth3, eth4 and eth5 are net-interfaces of pci/0000:08:00.0
pci/0000:08:00.1 pci/0000:08:00.2 pci/0000:08:00.3 respectively.
User can verify LAG state and type via debugfs:
/sys/kernel/debug/mlx5/0000\:08\:00.0/lag/state
/sys/kernel/debug/mlx5/0000\:08\:00.0/lag/type
[1]
https://lore.kernel.org/netdev/20230601060118.154015-1-saeed@kernel.org/T/#mf1d2083780970ba277bfe721554d4925f03f36d1
================
* tag 'mlx5-updates-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: simplify condition after napi budget handling change
mlx5/core: E-Switch, Allocate ECPF vport if it's an eswitch manager
net/mlx5: Skip inline mode check after mlx5_eswitch_enable_locked() failure
net/mlx5e: TC, refactor access to hash key
net/mlx5e: Remove RX page cache leftovers
net/mlx5e: Expose catastrophic steering error counters
net/mlx5: Enable 4 ports VF LAG
net/mlx5: LAG, block multiport eswitch LAG in case ldev have more than 2 ports
net/mlx5: LAG, block multipath LAG in case ldev have more than 2 ports
net/mlx5: LAG, change mlx5_shared_fdb_supported() to static
net/mlx5: LAG, generalize handling of shared FDB
net/mlx5: LAG, check if all eswitches are paired for shared FDB
{net/RDMA}/mlx5: introduce lag_for_each_peer
RDMA/mlx5: Free second uplink ib port
====================
Link: https://lore.kernel.org/r/20230607210410.88209-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netlink version of set_wol checks for not supported wolopts and avoids
setting wol when the correct wolopt is already set. If we do the same with
the ioctl version then we can remove these checks from the driver layer.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/1686179653-29750-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
complete Lynx mdio device handling
This series completes the mdio device lifetime handling for Lynx PCS
users which do not create their own mdio device, but instead fetch
it using a firmware description - namely the DPAA2 and FMAN_MEMAC
drivers.
In a previous patch set, lynx_pcs_create() was modified to increase
the mdio device refcount, and lynx_pcs_destroy() to drop that
refcount.
The first two patches change these two drivers to put the reference
which they hold immediately after lynx_pcs_create(), effectively
handing the responsibility for maintaining the refcount to the Lynx
PCS driver.
A side effect of the first two patches is that lynx_get_mdio_device()
is no longer used, so patch 3 removes it.
Patch 4 adds a new helper - lynx_pcs_create_fwnode(), which creates
a Lynx PCS instance from the fwnode.
Patch 5 and 6 convert the two drivers to make use of this new helper,
which simply has to find the mdio device, and then create the Lynx
PCS from that.
With those conversions done, lynx_pcs_create() is no longer required
outside pcs-lynx.c, so remove it from public view.
Patch 8 we changes lynx_pcs_create() to return an error-pointer rather
than NULL to bring consistency to the return style, and means that we
can remove the NULL-to-error-pointer conversion from both
lynx_pcs_create_fwnode() and lynx_pcs_create_mdiodev().
Patch 9 adds a check for the fwnode being available, and returns an
-ENODEV error pointer if unavailable.
Patch 10 removes this check from DPAA2, detecting the error pointer
value to continue printing the helpful message.
Patch 11 removes this check from fman_memac, and in doing so fixes a
bug where if the node is unavailable, the reference count is not
dropped.
====================
Link: https://lore.kernel.org/r/ZIBwuw+IuGQo5yV8@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use pcs-lynx's check rather than our own when determining if the device
is available. This fixes a bug where the reference gained by
of_parse_phandle() is not dropped if the device is not available.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use pcs-lynx's check rather than our own when determining if the device
is available.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check that the fwnode is marked as available prior to trying to lookup
the PCS device, and return -ENODEV if unavailable. Document the return
codes from lynx_pcs_create_fwnode().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change lynx_pcs_create() to return an error-pointer on failure to
allocate memory, rather than returning NULL. This allows the removal
of the conversion in lynx_pcs_create_fwnode() and
lynx_pcs_create_mdiodev().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We no longer need to export lynx_pcs_create() for drivers to use as we
now have all the functionality we need in the two new creation helpers.
Remove the export and prototype, and make it static.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use lynx_pcs_create_fwnode() to create a lynx PCS from a fwnode handle.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use lynx_pcs_create_fwnode() to create a lynx PCS from a fwnode handle.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a helper to create a lynx PCS from a fwnode handle.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lynx_get_mdio_device() is no longer necessary, let's remove it so the
lynx PCS code is always managing the lifetime of the mdiodev.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Put the mdiodev after lynx_pcs_create() so that the Lynx PCS driver
can manage the lifetime of the mdiodev its using.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Put the mdiodev after lynx_pcs_create() so that the Lynx PCS driver
can manage the lifetime of the mdiodev its using.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MIPS Boston board, which is using MIPS_GENERIC kernel is using
EG20T PCH and thus need this driver.
Dependency of PCH_GBE, PTP_1588_CLOCK_PCH is also fixed for
MIPS_GENERIC.
Note that CONFIG_PCH_GBE is selected in arch/mips/configs/generic/
board-boston.config for a while, some how it's never wired up
in Kconfig.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230607055953.34110-1-jiaxun.yang@flygoat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The recently added 'VXLAN_F_LOCALBYPASS' flag is set by default on VXLAN
devices and denotes a behavior that is irrelevant for the hardware data
path. Add it to the lists of IPv4 and IPv6 supported flags to avoid
rejecting offload of VXLAN devices which have this flag set.
Fixes: 69474a8a58 ("net: vxlan: Add nolocalbypass option to vxlan.")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/5533e63643bf719bbe286fef60f749c9cad35005.1686139716.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl: generate code for the devlink family
Another chunk of changes to support more capabilities in the YNL
code gen. Devlink brings in deep nesting and directional messages
(requests and responses have different IDs). We need a healthy
dose of codegen changes to support those (I wasn't planning to
support code gen for "directional" families initially, but
the importance of devlink and ethtool is undeniable).
====================
Link: https://lore.kernel.org/r/20230607202403.1089925-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a sample to show off how to issue basic devlink requests.
For added testing issue get requests while walking a dump.
$ ./devlink
netdevsim/netdevsim1:
driver: netdevsim
running fw:
fw.mgmt: 10.20.30
...
netdevsim/netdevsim2:
driver: netdevsim
running fw:
fw.mgmt: 10.20.30
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Admittedly the devlink.yaml spec is fairly limitted,
it only covers basic device get and info-get ops.
That's sufficient to be useful (monitoring FW versions
in the fleet). Plus it gives us a chance to exercise
deep nesting and directional messaging in YNL.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that all nested types have structs and are sorted topologically
there should be no need to generate forward declarations for policies.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
So far we had only created structures for nested types nested
directly in messages (second level of attrs so to speak).
Walk types in depth to support deeper nesting.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We only render parse and netlink generation helpers as needed,
to avoid generating dead code. Propagate the information from
first- and second-layer attribute sets onto all children.
Otherwise devlink won't work, it has a lot more levels of nesting.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to sort the structures to avoid the need for forward
declarations. While at it remove the sort of structs when
rendering, it doesn't do anything.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for supporting families which use different msg
ids to and from the kernel - make sure the ids in op strmap
are correct. The map is expected to be used mostly for notifications,
don't generate a separate map for the "to kernel" direction.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Python YNL is much more forgiving than the C code gen in terms
of the spec completeness. Fill in a handful of devlink details
to make the spec usable in C.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd6 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84 ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee411 ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Always rely on 'driver_is_goingto_unload' of 'struct rtl_hal'
and remove (presumably misused) 'driver_going2unload' from it.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230605100700.111644-1-dmantipov@yandex.ru
Remove 'struct rtl_dualmac_easy_concurrent_ctl' of 'struct rtl_priv'
and related code in '_rtl_pci_tx_chk_waitq()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230602065940.149198-2-dmantipov@yandex.ru
Drop unused 'dualmac_easyconcurrent_retrytimer' of 'struct rtl_works',
corresponding 'rtl_easy_concurrent_retrytimer_callback()' handler,
'dualmac_easy_concurrent' function pointer of 'struct rtl_hal_ops'
and related call to 'timer_setup()' in '_rtl_init_deferred_work()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230602065940.149198-1-dmantipov@yandex.ru
It makes no sense to set MMC_PM_KEEP_POWER in shutdown. The flag
indicates to the MMC subsystem to keep the slot powered on during
suspend, but in shutdown the slot should actually be powered off.
Drop this call.
Fixes: 063848c3e1 ("rsi: sdio: Add WOWLAN support for S5 shutdown state")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527222859.273768-1-marex@denx.de
In case WoWlan was never configured during the operation of the system,
the hw->wiphy->wowlan_config will be NULL. rsi_config_wowlan() checks
whether wowlan_config is non-NULL and if it is not, then WARNs about it.
The warning is valid, as during normal operation the rsi_config_wowlan()
should only ever be called with non-NULL wowlan_config. In shutdown this
rsi_config_wowlan() should only ever be called if WoWlan was configured
before by the user.
Add checks for non-NULL wowlan_config into the shutdown hook. While at it,
check whether the wiphy is also non-NULL before accessing wowlan_config .
Drop the single-use wowlan_config variable, just inline it into function
call.
Fixes: 16bbc3eb83 ("rsi: fix null pointer dereference during rsi_shutdown()")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527222833.273741-1-marex@denx.de
In brcmf_chip_recognition(), the return value from an MMIO read is
interpreted as various fields without checking if it failed, which is
harmless today, as the interpreted fields are checked for validity a
few lines below. However, in corner cases (on my MacbookPro 14,1,
sometimes after waking from sleep or soft reboot), when this happens,
it causes the logging to be misleading, because the message indicates
an unsupported chip type ("brcmfmac: brcmf_chip_recognition: chip
backplane type 15 is not supported"). This patch detects this case
slightly earlier and logs an appropriate message, with the same return
result as is the case today.
Signed-off-by: Neal Sidhwaney <nealsid@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230603060021.57225-1-nealsid@gmail.com
Update TX power tables to RF version R63.
TX power tables' changes:
* TX power byrate:
tweak a bit
* TX power limit, TX power limit RU, TX power shape:
configure values for MEXICO, UKRAINE, CHILE, QATAR
tweak a bit on other configured values
* 6 GHz TX power limit, 6 GHz TX power limit RU:
add an extra dimension for 6 GHz regulatory power type, i.e.
STD (standard power), LPI (low power indoor), VLP (very low power)
Besides, we adjust TX power handling at 6 GHz in phy to consider 6 GHz
regulatory power type.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230602150556.36777-8-pkshih@realtek.com
Update TX power tables to RF version R63.
TX power tables' changes:
* TX power byrate:
tweak a bit
* TX power limit, TX power limit RU, TX power shape:
configure values for MEXICO, UKRAINE, CHILE, QATAR
tweak a bit on other configured values
* 6 GHz TX power limit, 6 GHz TX power limit RU:
add an extra dimension for 6 GHz regulatory power type, i.e.
STD (standard power), LPI (low power indoor), VLP (very low power)
Besides, we adjust TX power handling at 6 GHz in phy to consider 6 GHz
regulatory power type.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230602150556.36777-7-pkshih@realtek.com
Update TX power tables to RF version R63.
TX power tables' changes:
* TX power byrate:
tweak a bit
* TX power limit, TX power limit RU, TX power shape:
configure values for MEXICO, UKRAINE, CHILE, QATAR
tweak a bit on other configured values
* 6 GHz TX power limit, 6 GHz TX power limit RU:
add an extra dimension for 6 GHz regulatory power type, i.e.
STD (standard power), LPI (low power indoor), VLP (very low power)
Besides, we adjust TX power handling at 6 GHz in phy to consider 6 GHz
regulatory power type.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230602150556.36777-6-pkshih@realtek.com
Configure the corresponding power type for 6 GHz regulatory if we can
determine one single target. Otherwise, we use the default one.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230602150556.36777-5-pkshih@realtek.com
Update notes:
According to Realtek Regulatory R40 and Realtek Channel Plan R64,
configure rtw89_regulatory mapping of 6 GHz for more countries and
adjust rtw89_regulatory mapping of 2/5 GHz for a few countries.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230602150556.36777-4-pkshih@realtek.com
We allow platform to disable 6 GHz on chips, which supports 6 GHz, through
BIOS. Driver will evaluate Realtek acpi DSM with RTW89_ACPI_DSM_FUNC_6G_DIS
(function 3) to get whether 6 GHz should be disabled.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230602150556.36777-3-pkshih@realtek.com
We refine to check if supported bands of NL80211_BAND_2GHZ and
NL80211_BAND_5GHZ exist before freeing their iftype_data. For
now, it does not really encounter problems because all current
chips support both 2 GHz and 5 GHz. But, driver actually allows
chips to declare whether 2/5 GHz are supported or not. In case
some future chips really don't support them, we refine this code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230602150556.36777-2-pkshih@realtek.com
RTL8851B firmware supports CRASH_TRIGGER feature from v0.29.41.0.
After this is configured, debugfs fw_crash can support type 1 on
RTL8851B to trigger firmware crash and verify L2 recovery through
simulation.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230531060713.57203-5-pkshih@realtek.com
The key condition to check in wrapper of setting TX power is whether entity
is active or not. Before entity is active, we restrict TX power from being
set by outside callers, e.g. SAR/regulatory.
We mark entity as inactive when powering off MAC. Then, we will mark it as
active when we initialize HW channel stuffs after MAC power on. Although we
can get an active entity after leaving idle phase, TX power doesn't be set
well for default channel until stack set target channel for connection. It
causes that RF things cannot use better TX power during this interval.
Below are some cases which may encounter this or a similar situation.
* hw scan process before connection
As described above.
* right after restart hardware process (SER L2)
HW stuffs of target channel is initialized after mac80211 restart
hardware, but we unexpectedly need to wait one more command to set
channel again or to set TX power.
To fix it and improve RF behavior in that interval, during setting channel,
we don't need to check entity state before setting TX power, which actually
is used to restrict outside callers. It means we call chip ops directly to
replace the wrapper call. Then, TX power can be initialized as long as we
initialize/setup HW stuffs on one channel.
Besides, all chips should configure ops of setting TX power, so we remove
trivial check on pointer.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230531060713.57203-4-pkshih@realtek.com
