Commit Graph

355 Commits

Author SHA1 Message Date
Hugh Dickins
c675790972 mm: /proc/sys/vm/stat_refresh stop checking monotonic numa stats
All of the VM NUMA stats are event counts, incremented never
decremented: it is not very useful for vmstat_refresh() to check them
throughout their first aeon, then warn on them throughout their next.

Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2102251514110.13363@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 11:27:25 -07:00
Hugh Dickins
75083aae11 mm: /proc/sys/vm/stat_refresh skip checking known negative stats
vmstat_refresh() can occasionally catch nr_zone_write_pending and
nr_writeback when they are transiently negative.  The reason is partly
that the interrupt which decrements them in test_clear_page_writeback()
can come in before __test_set_page_writeback() got to increment them;
but transient negatives are still seen even when that is prevented, and
I am not yet certain why (but see Roman's note below).  Those stats are
not buggy, they have never been seen to drift away from 0 permanently:
so just avoid the annoyance of showing a warning on them.

Similarly avoid showing a warning on nr_free_cma: CMA users have seen
that one reported negative from /proc/sys/vm/stat_refresh too, but it
does drift away permanently: I believe that's because its incrementation
and decrementation are decided by page migratetype, but the migratetype
of a pageblock is not guaranteed to be constant.

Roman Gushchin points out:
 "For performance reasons, vmstat counters are incremented and
  decremented using per-cpu batches. vmstat_refresh() flushes the
  per-cpu batches on all CPUs, to get values as accurate as possible;
  but this method is not atomic, so the resulting value is not always
  precise.

  As a consequence, for those counters whose actual value is close to 0,
  a small negative value may occasionally be reported. If the value is
  small and the state is transient, it is not an indication of an error"

Link: https://lore.kernel.org/linux-mm/20200714173747.3315771-1-guro@fb.com/
Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2103012158540.7549@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Roman Gushchin <guro@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 11:27:25 -07:00
Hugh Dickins
6d99a4c029 mm: no more EINVAL from /proc/sys/vm/stat_refresh
EINVAL was good for drawing the refresher's attention to a warning in
dmesg, but became very tiresome when running test suites scripted with
"set -e": an underflow from a bug in one feature would cause unrelated
tests much later to fail, just because their /proc/sys/vm/stat_refresh
touch failed with that error.  Stop doing that.

Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2102251510410.13363@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 11:27:25 -07:00
Hugh Dickins
76d8cc3c8f mm: restore node stat checking in /proc/sys/vm/stat_refresh
In v4.7 commit 52b6f46bc1 ("mm: /proc/sys/vm/stat_refresh to force
vmstat update") introduced vmstat_refresh(), with its vmstat underflow
checking; then in v4.8 commit 75ef718405 ("mm, vmstat: add
infrastructure for per-node vmstats") split NR_VM_NODE_STAT_ITEMS out of
NR_VM_ZONE_STAT_ITEMS without updating vmstat_refresh(): so it has been
missing out much of the vmstat underflow checking ever since.

Reinstate it.

Thanks to Roman Gushchin <guro@fb.com> for tangentially pointing this out.

Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2102251502240.13363@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 11:27:25 -07:00
Minchan Kim
bbb269206f mm: vmstat: add cma statistics
Since CMA is used more widely, it's worth to have CMA allocation
statistics into vmstat.  With it, we could know how agressively system
uses cma allocation and how often it fails.

Link: https://lkml.kernel.org/r/20210302183346.3707237-1-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: John Dias <joaodias@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 11:27:24 -07:00
Jiang Biao
fbcc8183a4 mm/vmstat.c: erase latency in vmstat_shepherd
Many 100us+ latencies have been deteceted in vmstat_shepherd() on CPX
platform which has 208 logic cpus.  And vmstat_shepherd is queued every
second, which could make the case worse.

Add schedule point in vmstat_shepherd() to erase the latency.

Link: https://lkml.kernel.org/r/20210111035526.1511-1-benbjiang@tencent.com
Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Reported-by: Bin Lai <robinlai@tencent.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26 09:41:00 -08:00
Johannes Weiner
629484ae73 mm: vmstat: add some comments on internal storage of byte items
Byte-accounted items are used for slab object accounting at the cgroup
level, because the objects in a slab page can belong to different cgroups.
At the global level these items always change in multiples of whole slab
pages.  The vmstat code exploits this and stores these items as pages
internally, which allows for more compact per-cpu data.

This optimization isn't self-evident from the asserts and the division in
the stat update functions.  Provide the reader with some context.

Link: https://lkml.kernel.org/r/20210202184411.118614-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26 09:41:00 -08:00
Johannes Weiner
2bbd00aef0 mm: vmstat: fix NOHZ wakeups for node stat changes
On NOHZ, the periodic vmstat flushers on each CPU can go to sleep and
won't wake up until stat changes are detected in the per-cpu deltas of the
zone vmstat counters.

In commit 75ef718405 ("mm, vmstat: add infrastructure for per-node
vmstats") per-node counters were introduced, and subsequently most stats
were moved from the zone to the node level.  However, the node counters
weren't added to the NOHZ wakeup detection.

In theory this can cause per-cpu errors to remain in the user-reported
stats indefinitely.  In practice this only affects a handful of sub
counters (file_mapped, dirty and writeback e.g.) because other page state
changes at the node level likely involve a change at the zone level as
well (alloc and free, lru ops).  Also, nobody has complained.

Fix it up for completeness: wake up vmstat refreshing on node changes.
Also remove the BUILD_BUG_ONs that assert counter size; we haven't relied
on it since we added sizeof() to the range calculation in commit
13c9aaf7fa ("mm/vmstat.c: fix NUMA statistics updates").

Link: https://lkml.kernel.org/r/20210202184342.118513-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26 09:41:00 -08:00
David Hildenbrand
3c381db1fa mm/page_alloc: count CMA pages per zone and print them in /proc/zoneinfo
Let's count the number of CMA pages per zone and print them in
/proc/zoneinfo.

Having access to the total number of CMA pages per zone is helpful for
debugging purposes to know where exactly the CMA pages ended up, and to
figure out how many pages of a zone might behave differently, even after
some of these pages might already have been allocated.

As one example, CMA pages part of a kernel zone cannot be used for
ordinary kernel allocations but instead behave more like ZONE_MOVABLE.

For now, we are only able to get the global nr+free cma pages from
/proc/meminfo and the free cma pages per zone from /proc/zoneinfo.

Example after this patch when booting a 6 GiB QEMU VM with
"hugetlb_cma=2G":
  # cat /proc/zoneinfo | grep cma
          cma      0
        nr_free_cma  0
          cma      0
        nr_free_cma  0
          cma      524288
        nr_free_cma  493016
          cma      0
          cma      0
  # cat /proc/meminfo | grep Cma
  CmaTotal:        2097152 kB
  CmaFree:         1972064 kB

Note: We print even without CONFIG_CMA, just like "nr_free_cma"; this way,
      one can be sure when spotting "cma 0", that there are definetly no
      CMA pages located in a zone.

[david@redhat.com: v2]
  Link: https://lkml.kernel.org/r/20210128164533.18566-1-david@redhat.com
[david@redhat.com: v3]
  Link: https://lkml.kernel.org/r/20210129113451.22085-1-david@redhat.com

Link: https://lkml.kernel.org/r/20210127101813.6370-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26 09:41:00 -08:00
Shakeel Butt
b603894248 mm: memcg: add swapcache stat for memcg v2
This patch adds swapcache stat for the cgroup v2.  The swapcache
represents the memory that is accounted against both the memory and the
swap limit of the cgroup.  The main motivation behind exposing the
swapcache stat is for enabling users to gracefully migrate from cgroup
v1's memsw counter to cgroup v2's memory and swap counters.

Cgroup v1's memsw limit allows users to limit the memory+swap usage of a
workload but without control on the exact proportion of memory and swap.
Cgroup v2 provides separate limits for memory and swap which enables more
control on the exact usage of memory and swap individually for the
workload.

With some little subtleties, the v1's memsw limit can be switched with the
sum of the v2's memory and swap limits.  However the alternative for memsw
usage is not yet available in cgroup v2.  Exposing per-cgroup swapcache
stat enables that alternative.  Adding the memory usage and swap usage and
subtracting the swapcache will approximate the memsw usage.  This will
help in the transparent migration of the workloads depending on memsw
usage and limit to v2' memory and swap counters.

The reasons these applications are still interested in this approximate
memsw usage are: (1) these applications are not really interested in two
separate memory and swap usage metrics.  A single usage metric is more
simple to use and reason about for them.

(2) The memsw usage metric hides the underlying system's swap setup from
the applications.  Applications with multiple instances running in a
datacenter with heterogeneous systems (some have swap and some don't) will
keep seeing a consistent view of their usage.

[akpm@linux-foundation.org: fix CONFIG_SWAP=n build]

Link: https://lkml.kernel.org/r/20210108155813.2914586-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 13:38:29 -08:00
Muchun Song
69473e5de8 mm: memcontrol: convert NR_ANON_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters.  In
the systems with hundreds of processors it can be GBs of memory.  For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.

The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates.  But it can make the statistics more accuracy
for the THP vmstat counters.

So we convert the NR_ANON_THPS account to pages.  This patch is consistent
with 8f182270df ("mm/swap.c: flush lru pvecs on compound page arrival").
Doing this also can make the unit of vmstat counters more unified.
Finally, the unit of the vmstat counters are pages, kB and bytes.  The
B/KB suffix can tell us that the unit is bytes or kB.  The rest which is
without suffix are pages.

Link: https://lkml.kernel.org/r/20201228164110.2838-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael. J. Wysocki <rafael@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 13:38:29 -08:00
Mike Rapoport
5e545df329 arm: remove CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
ARM is the only architecture that defines CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
which in turn enables memmap_valid_within() function that is intended to
verify existence  of struct page associated with a pfn when there are holes
in the memory map.

However, the ARCH_HAS_HOLES_MEMORYMODEL also enables HAVE_ARCH_PFN_VALID
and arch-specific pfn_valid() implementation that also deals with the holes
in the memory map.

The only two users of memmap_valid_within() call this function after
a call to pfn_valid() so the memmap_valid_within() check becomes redundant.

Remove CONFIG_ARCH_HAS_HOLES_MEMORYMODEL and memmap_valid_within() and rely
entirely on ARM's implementation of pfn_valid() that is now enabled
unconditionally.

Link: https://lkml.kernel.org/r/20201101170454.9567-9-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:42 -08:00
Shakeel Butt
f0c0c115fb mm: memcontrol: account pagetables per node
For many workloads, pagetable consumption is significant and it makes
sense to expose it in the memory.stat for the memory cgroups.  However at
the moment, the pagetables are accounted per-zone.  Converting them to
per-node and using the right interface will correctly account for the
memory cgroups as well.

[akpm@linux-foundation.org: export __mod_lruvec_page_state to modules for arch/mips/kvm/]

Link: https://lkml.kernel.org/r/20201130212541.2781790-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:40 -08:00
Miaohe Lin
406100762a mm/vmstat.c: use helper macro abs()
Use helper macro abs() to simplify the "x > t || x < -t" cmp.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200905084008.15748-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:17 -07:00
Linus Torvalds
b25d1dc947 Merge branch 'simplify-do_wp_page'
Merge emailed patches from Peter Xu:
 "This is a small series that I picked up from Linus's suggestion to
  simplify cow handling (and also make it more strict) by checking
  against page refcounts rather than mapcounts.

  This makes uffd-wp work again (verified by running upmapsort)"

Note: this is horrendously bad timing, and making this kind of
fundamental vm change after -rc3 is not at all how things should work.
The saving grace is that it really is a a nice simplification:

 8 files changed, 29 insertions(+), 120 deletions(-)

The reason for the bad timing is that it turns out that commit
17839856fd ("gup: document and work around 'COW can break either way'
issue" broke not just UFFD functionality (as Peter noticed), but Mikulas
Patocka also reports that it caused issues for strace when running in a
DAX environment with ext4 on a persistent memory setup.

And we can't just revert that commit without re-introducing the original
issue that is a potential security hole, so making COW stricter (and in
the process much simpler) is a step to then undoing the forced COW that
broke other uses.

Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/

* emailed patches from Peter Xu <peterx@redhat.com>:
  mm: Add PGREUSE counter
  mm/gup: Remove enfornced COW mechanism
  mm/ksm: Remove reuse_ksm_page()
  mm: do_wp_page() simplification
2020-09-04 09:31:54 -07:00
Peter Xu
798a6b87ec mm: Add PGREUSE counter
This accounts for wp_page_reuse() case, where we reused a page for COW.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 09:25:20 -07:00
Baoquan He
a8a4b7aeaf Revert "mm/vmstat.c: do not show lowmem reserve protection information of empty zone"
This reverts commit 26e7deadaa.

Sonny reported that one of their tests started failing on the latest
kernel on their Chrome OS platform.  The root cause is that the above
commit removed the protection line of empty zone, while the parser used in
the test relies on the protection line to mark the end of each zone.

Let's revert it to avoid breaking userspace testing or applications.

Fixes: 26e7deadaa ("mm/vmstat.c: do not show lowmem reserve protection information of empty zone)"
Reported-by: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>	[5.8.x]
Link: http://lkml.kernel.org/r/20200811075412.12872-1-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14 19:56:56 -07:00
Anshuman Khandual
1a5bae25e3 mm/vmstat: add events for THP migration without split
Add following new vmstat events which will help in validating THP
migration without split.  Statistics reported through these new VM events
will help in performance debugging.

1. THP_MIGRATION_SUCCESS
2. THP_MIGRATION_FAILURE
3. THP_MIGRATION_SPLIT

In addition, these new events also update normal page migration statistics
appropriately via PGMIGRATE_SUCCESS and PGMIGRATE_FAILURE.  While here,
this updates current trace event 'mm_migrate_pages' to accommodate now
available THP statistics.

[akpm@linux-foundation.org: s/hpage_nr_pages/thp_nr_pages/]
[ziy@nvidia.com: v2]
  Link: http://lkml.kernel.org/r/C5E3C65C-8253-4638-9D3C-71A61858BB8B@nvidia.com
[anshuman.khandual@arm.com: s/thp_nr_pages/hpage_nr_pages/]
  Link: http://lkml.kernel.org/r/1594287583-16568-1-git-send-email-anshuman.khandual@arm.com

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Link: http://lkml.kernel.org/r/1594080415-27924-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:57 -07:00
Nitin Gupta
d34c0a7599 mm: use unsigned types for fragmentation score
Proactive compaction uses per-node/zone "fragmentation score" which is
always in range [0, 100], so use unsigned type of these scores as well as
for related constants.

Signed-off-by: Nitin Gupta <nigupta@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200618010319.13159-1-nigupta@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:56 -07:00
Nitin Gupta
facdaa917c mm: proactive compaction
For some applications, we need to allocate almost all memory as hugepages.
However, on a running system, higher-order allocations can fail if the
memory is fragmented.  Linux kernel currently does on-demand compaction as
we request more hugepages, but this style of compaction incurs very high
latency.  Experiments with one-time full memory compaction (followed by
hugepage allocations) show that kernel is able to restore a highly
fragmented memory state to a fairly compacted memory state within <1 sec
for a 32G system.  Such data suggests that a more proactive compaction can
help us allocate a large fraction of memory as hugepages keeping
allocation latencies low.

For a more proactive compaction, the approach taken here is to define a
new sysctl called 'vm.compaction_proactiveness' which dictates bounds for
external fragmentation which kcompactd tries to maintain.

The tunable takes a value in range [0, 100], with a default of 20.

Note that a previous version of this patch [1] was found to introduce too
many tunables (per-order extfrag{low, high}), but this one reduces them to
just one sysctl.  Also, the new tunable is an opaque value instead of
asking for specific bounds of "external fragmentation", which would have
been difficult to estimate.  The internal interpretation of this opaque
value allows for future fine-tuning.

Currently, we use a simple translation from this tunable to [low, high]
"fragmentation score" thresholds (low=100-proactiveness, high=low+10%).
The score for a node is defined as weighted mean of per-zone external
fragmentation.  A zone's present_pages determines its weight.

To periodically check per-node score, we reuse per-node kcompactd threads,
which are woken up every 500 milliseconds to check the same.  If a node's
score exceeds its high threshold (as derived from user-provided
proactiveness value), proactive compaction is started until its score
reaches its low threshold value.  By default, proactiveness is set to 20,
which implies threshold values of low=80 and high=90.

This patch is largely based on ideas from Michal Hocko [2].  See also the
LWN article [3].

Performance data
================

System: x64_64, 1T RAM, 80 CPU threads.
Kernel: 5.6.0-rc3 + this patch

echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/enabled
echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/defrag

Before starting the driver, the system was fragmented from a userspace
program that allocates all memory and then for each 2M aligned section,
frees 3/4 of base pages using munmap.  The workload is mainly anonymous
userspace pages, which are easy to move around.  I intentionally avoided
unmovable pages in this test to see how much latency we incur when
hugepage allocations hit direct compaction.

1. Kernel hugepage allocation latencies

With the system in such a fragmented state, a kernel driver then allocates
as many hugepages as possible and measures allocation latency:

(all latency values are in microseconds)

- With vanilla 5.6.0-rc3

  percentile latency
  –––––––––– –––––––
	   5    7894
	  10    9496
	  25   12561
	  30   15295
	  40   18244
	  50   21229
	  60   27556
	  75   30147
	  80   31047
	  90   32859
	  95   33799

Total 2M hugepages allocated = 383859 (749G worth of hugepages out of 762G
total free => 98% of free memory could be allocated as hugepages)

- With 5.6.0-rc3 + this patch, with proactiveness=20

sysctl -w vm.compaction_proactiveness=20

  percentile latency
  –––––––––– –––––––
	   5       2
	  10       2
	  25       3
	  30       3
	  40       3
	  50       4
	  60       4
	  75       4
	  80       4
	  90       5
	  95     429

Total 2M hugepages allocated = 384105 (750G worth of hugepages out of 762G
total free => 98% of free memory could be allocated as hugepages)

2. JAVA heap allocation

In this test, we first fragment memory using the same method as for (1).

Then, we start a Java process with a heap size set to 700G and request the
heap to be allocated with THP hugepages.  We also set THP to madvise to
allow hugepage backing of this heap.

/usr/bin/time
 java -Xms700G -Xmx700G -XX:+UseTransparentHugePages -XX:+AlwaysPreTouch

The above command allocates 700G of Java heap using hugepages.

- With vanilla 5.6.0-rc3

17.39user 1666.48system 27:37.89elapsed

- With 5.6.0-rc3 + this patch, with proactiveness=20

8.35user 194.58system 3:19.62elapsed

Elapsed time remains around 3:15, as proactiveness is further increased.

Note that proactive compaction happens throughout the runtime of these
workloads.  The situation of one-time compaction, sufficient to supply
hugepages for following allocation stream, can probably happen for more
extreme proactiveness values, like 80 or 90.

In the above Java workload, proactiveness is set to 20.  The test starts
with a node's score of 80 or higher, depending on the delay between the
fragmentation step and starting the benchmark, which gives more-or-less
time for the initial round of compaction.  As t he benchmark consumes
hugepages, node's score quickly rises above the high threshold (90) and
proactive compaction starts again, which brings down the score to the low
threshold level (80).  Repeat.

bpftrace also confirms proactive compaction running 20+ times during the
runtime of this Java benchmark.  kcompactd threads consume 100% of one of
the CPUs while it tries to bring a node's score within thresholds.

Backoff behavior
================

Above workloads produce a memory state which is easy to compact.  However,
if memory is filled with unmovable pages, proactive compaction should
essentially back off.  To test this aspect:

- Created a kernel driver that allocates almost all memory as hugepages
  followed by freeing first 3/4 of each hugepage.
- Set proactiveness=40
- Note that proactive_compact_node() is deferred maximum number of times
  with HPAGE_FRAG_CHECK_INTERVAL_MSEC of wait between each check
  (=> ~30 seconds between retries).

[1] https://patchwork.kernel.org/patch/11098289/
[2] https://lore.kernel.org/linux-mm/20161230131412.GI13301@dhcp22.suse.cz/
[3] https://lwn.net/Articles/817905/

Signed-off-by: Nitin Gupta <nigupta@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nitin Gupta <ngupta@nitingupta.dev>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Link: http://lkml.kernel.org/r/20200616204527.19185-1-nigupta@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:56 -07:00
Joonsoo Kim
170b04b7ae mm/workingset: prepare the workingset detection infrastructure for anon LRU
To prepare the workingset detection for anon LRU, this patch splits
workingset event counters for refault, activate and restore into anon and
file variants, as well as the refaults counter in struct lruvec.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Link: http://lkml.kernel.org/r/1595490560-15117-4-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:55 -07:00
Shakeel Butt
991e767385 mm: memcontrol: account kernel stack per node
Currently the kernel stack is being accounted per-zone.  There is no need
to do that.  In addition due to being per-zone, memcg has to keep a
separate MEMCG_KERNEL_STACK_KB.  Make the stat per-node and deprecate
MEMCG_KERNEL_STACK_KB as memcg_stat_item is an extension of
node_stat_item.  In addition localize the kernel stack stats updates to
account_kernel_stack().

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200630161539.1759185-1-shakeelb@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:25 -07:00
Roman Gushchin
ea426c2a7d mm: memcg: prepare for byte-sized vmstat items
To implement per-object slab memory accounting, we need to convert slab
vmstat counters to bytes.  Actually, out of 4 levels of counters: global,
per-node, per-memcg and per-lruvec only two last levels will require
byte-sized counters.  It's because global and per-node counters will be
counting the number of slab pages, and per-memcg and per-lruvec will be
counting the amount of memory taken by charged slab objects.

Converting all vmstat counters to bytes or even all slab counters to bytes
would introduce an additional overhead.  So instead let's store global and
per-node counters in pages, and memcg and lruvec counters in bytes.

To make the API clean all access helpers (both on the read and write
sides) are dealing with bytes.

To avoid back-and-forth conversions a new flavor of read-side helpers is
introduced, which always returns values in pages: node_page_state_pages()
and global_node_page_state_pages().

Actually new helpers are just reading raw values.  Old helpers are simple
wrappers, which will complain on an attempt to read byte value, because at
the moment no one actually needs bytes.

Thanks to Johannes Weiner for the idea of having the byte-sized API on top
of the page-sized internal storage.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:24 -07:00
Kefeng Wang
01a9956002 mm/vmstat.c: convert to use DEFINE_SEQ_ATTRIBUTE macro
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/20200509064031.181091-3-wangkefeng.wang@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:26 -07:00
Linus Torvalds
ee01c4d72a Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
 "More mm/ work, plenty more to come

  Subsystems affected by this patch series: slub, memcg, gup, kasan,
  pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs,
  thp, mmap, kconfig"

* akpm: (131 commits)
  arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
  x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
  riscv: support DEBUG_WX
  mm: add DEBUG_WX support
  drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
  mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
  powerpc/mm: drop platform defined pmd_mknotpresent()
  mm: thp: don't need to drain lru cache when splitting and mlocking THP
  hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
  sparc32: register memory occupied by kernel as memblock.memory
  include/linux/memblock.h: fix minor typo and unclear comment
  mm, mempolicy: fix up gup usage in lookup_node
  tools/vm/page_owner_sort.c: filter out unneeded line
  mm: swap: memcg: fix memcg stats for huge pages
  mm: swap: fix vmstats for huge pages
  mm: vmscan: limit the range of LRU type balancing
  mm: vmscan: reclaim writepage is IO cost
  mm: vmscan: determine anon/file pressure balance at the reclaim root
  mm: balance LRU lists based on relative thrashing
  mm: only count actual rotations as LRU reclaim cost
  ...
2020-06-03 20:24:15 -07:00
Johannes Weiner
497a6c1b09 mm: keep separate anon and file statistics on page reclaim activity
Having statistics on pages scanned and pages reclaimed for both anon and
file pages makes it easier to evaluate changes to LRU balancing.

While at it, clean up the stat-keeping mess for isolation, putback,
reclaim stats etc.  a bit: first the physical LRU operation (isolation and
putback), followed by vmstats, reclaim_stats, and then vm events.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-3-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:48 -07:00
Baoquan He
26e7deadaa mm/vmstat.c: do not show lowmem reserve protection information of empty zone
Because the lowmem reserve protection of a zone can't tell anything if the
zone is empty, except of adding one more line in /proc/zoneinfo.

Let's remove it from that zone's showing.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200402140113.3696-4-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:44 -07:00
Linus Torvalds
cb8e59cc87 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...
2020-06-03 16:27:18 -07:00
Linus Torvalds
94709049fb Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:
 "A few little subsystems and a start of a lot of MM patches.

  Subsystems affected by this patch series: squashfs, ocfs2, parisc,
  vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
  swap, memcg, pagemap, memory-failure, vmalloc, kasan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
  kasan: move kasan_report() into report.c
  mm/mm_init.c: report kasan-tag information stored in page->flags
  ubsan: entirely disable alignment checks under UBSAN_TRAP
  kasan: fix clang compilation warning due to stack protector
  x86/mm: remove vmalloc faulting
  mm: remove vmalloc_sync_(un)mappings()
  x86/mm/32: implement arch_sync_kernel_mappings()
  x86/mm/64: implement arch_sync_kernel_mappings()
  mm/ioremap: track which page-table levels were modified
  mm/vmalloc: track which page-table levels were modified
  mm: add functions to track page directory modifications
  s390: use __vmalloc_node in stack_alloc
  powerpc: use __vmalloc_node in alloc_vm_stack
  arm64: use __vmalloc_node in arch_alloc_vmap_stack
  mm: remove vmalloc_user_node_flags
  mm: switch the test_vmalloc module to use __vmalloc_node
  mm: remove __vmalloc_node_flags_caller
  mm: remove both instances of __vmalloc_node_flags
  mm: remove the prot argument to __vmalloc_node
  mm: remove the pgprot argument to __vmalloc
  ...
2020-06-02 12:21:36 -07:00
NeilBrown
8d92890bd6 mm/writeback: discard NR_UNSTABLE_NFS, use NR_WRITEBACK instead
After an NFS page has been written it is considered "unstable" until a
COMMIT request succeeds.  If the COMMIT fails, the page will be
re-written.

These "unstable" pages are currently accounted as "reclaimable", either
in WB_RECLAIMABLE, or in NR_UNSTABLE_NFS which is included in a
'reclaimable' count.  This might have made sense when sending the COMMIT
required a separate action by the VFS/MM (e.g.  releasepage() used to
send a COMMIT).  However now that all writes generated by ->writepages()
will automatically be followed by a COMMIT (since commit 919e3bd9a8
("NFS: Ensure we commit after writeback is complete")) it makes more
sense to treat them as writeback pages.

So this patch removes NR_UNSTABLE_NFS and accounts unstable pages in
NR_WRITEBACK and WB_WRITEBACK.

A particular effect of this change is that when
wb_check_background_flush() calls wb_over_bg_threshold(), the latter
will report 'true' a lot less often as the 'unstable' pages are no
longer considered 'dirty' (as there is nothing that writeback can do
about them anyway).

Currently wb_check_background_flush() will trigger writeback to NFS even
when there are relatively few dirty pages (if there are lots of unstable
pages), this can result in small writes going to the server (10s of
Kilobytes rather than a Megabyte) which hurts throughput.  With this
patch, there are fewer writes which are each larger on average.

Where the NR_UNSTABLE_NFS count was included in statistics
virtual-files, the entry is retained, but the value is hard-coded as
zero.  static trace points and warning printks which mentioned this
counter no longer report it.

[akpm@linux-foundation.org: re-layout comment]
[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Acked-by: Michal Hocko <mhocko@suse.com>	[mm]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Link: http://lkml.kernel.org/r/87d06j7gqa.fsf@notabene.neil.brown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:08 -07:00
Sami Tolvanen
628d06a48f scs: Add page accounting for shadow call stack allocations
This change adds accounting for the memory allocated for shadow stacks.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-15 16:35:49 +01:00
Christoph Hellwig
32927393dc sysctl: pass kernel pointers to ->proc_handler
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from  userspace in common code.  This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.

As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-27 02:07:40 -04:00
David Rientjes
85b9f46e8e mm, thp: track fallbacks due to failed memcg charges separately
The thp_fault_fallback and thp_file_fallback vmstats are incremented if
either the hugepage allocation fails through the page allocator or the
hugepage charge fails through mem cgroup.

This patch leaves this field untouched but adds two new fields,
thp_{fault,file}_fallback_charge, which is incremented only when the mem
cgroup charge fails.

This distinguishes between attempted hugepage allocations that fail due to
fragmentation (or low memory conditions) and those that fail due to mem
cgroup limits.  That can be used to determine the impact of fragmentation
on the system by excluding faults that failed due to memcg usage.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2003061422070.7412@chino.kir.corp.google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:43:38 -07:00
David Rientjes
dcdf11ee14 mm, shmem: add vmstat for hugepage fallback
The existing thp_fault_fallback indicates when thp attempts to allocate a
hugepage but fails, or if the hugepage cannot be charged to the mem cgroup
hierarchy.

Extend this to shmem as well.  Adds a new thp_file_fallback to complement
thp_file_alloc that gets incremented when a hugepage is attempted to be
allocated but fails, or if it cannot be charged to the mem cgroup
hierarchy.

Additionally, remove the check for CONFIG_TRANSPARENT_HUGE_PAGECACHE from
shmem_alloc_hugepage() since it is only called with this configuration
option.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2003061421240.7412@chino.kir.corp.google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:43:38 -07:00
John Hubbard
1970dc6f52 mm/gup: /proc/vmstat: pin_user_pages (FOLL_PIN) reporting
Now that pages are "DMA-pinned" via pin_user_page*(), and unpinned via
unpin_user_pages*(), we need some visibility into whether all of this is
working correctly.

Add two new fields to /proc/vmstat:

    nr_foll_pin_acquired
    nr_foll_pin_released

These are documented in Documentation/core-api/pin_user_pages.rst.  They
represent the number of pages (since boot time) that have been pinned
("nr_foll_pin_acquired") and unpinned ("nr_foll_pin_released"), via
pin_user_pages*() and unpin_user_pages*().

In the absence of long-running DMA or RDMA operations that hold pages
pinned, the above two fields will normally be equal to each other.

Also: update Documentation/core-api/pin_user_pages.rst, to remove an
earlier (now confirmed untrue) claim about a performance problem with
/proc/vmstat.

Also: update Documentation/core-api/pin_user_pages.rst to rename the new
/proc/vmstat entries, to the names listed here.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-9-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 09:35:27 -07:00
Konstantin Khlebnikov
ebc5d83d04 mm/memcontrol: use vmstat names for printing statistics
Use common names from vmstat array when possible.  This gives not much
difference in code size for now, but should help in keeping interfaces
consistent.

  add/remove: 0/2 grow/shrink: 2/0 up/down: 70/-72 (-2)
  Function                                     old     new   delta
  memory_stat_format                           984    1050     +66
  memcg_stat_show                              957     961      +4
  memcg1_event_names                            32       -     -32
  mem_cgroup_lru_names                          40       -     -40
  Total: Before=14485337, After=14485335, chg -0.00%

Link: http://lkml.kernel.org/r/157113012508.453.80391533767219371.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04 19:44:11 -08:00
Konstantin Khlebnikov
9d7ea9a297 mm/vmstat: add helpers to get vmstat item names for each enum type
Statistics in vmstat is combined from counters with different structure,
but names for them are merged into one array.

This patch adds trivial helpers to get name for each item:

  const char *zone_stat_name(enum zone_stat_item item);
  const char *numa_stat_name(enum numa_stat_item item);
  const char *node_stat_name(enum node_stat_item item);
  const char *writeback_stat_name(enum writeback_stat_item item);
  const char *vm_event_name(enum vm_event_item item);

Names for enum writeback_stat_item are folded in the middle of
vmstat_text so this patch moves declaration into header to calculate
offset of following items.

Also this patch reuses piece of node stat names for lru list names:

  const char *lru_list_name(enum lru_list lru);

This returns common lru list names: "inactive_anon", "active_anon",
"inactive_file", "active_file", "unevictable".

[khlebnikov@yandex-team.ru: do not use size of vmstat_text as count of /proc/vmstat items]
  Link: http://lkml.kernel.org/r/157152151769.4139.15423465513138349343.stgit@buzz
  Link: https://lore.kernel.org/linux-mm/cd1c42ae-281f-c8a8-70ac-1d01d417b2e1@infradead.org/T/#u
Link: http://lkml.kernel.org/r/157113012325.453.562783073839432766.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04 19:44:11 -08:00
Michal Hocko
93b3a67448 mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo
pagetypeinfo_showfree_print is called by zone->lock held in irq mode.
This is not really nice because it blocks both any interrupts on that
cpu and the page allocator.  On large machines this might even trigger
the hard lockup detector.

Considering the pagetypeinfo is a debugging tool we do not really need
exact numbers here.  The primary reason to look at the outuput is to see
how pageblocks are spread among different migratetypes and low number of
pages is much more interesting therefore putting a bound on the number
of pages on the free_list sounds like a reasonable tradeoff.

The new output will simply tell
  [...]
  Node    6, zone   Normal, type      Movable >100000 >100000 >100000 >100000  41019  31560  23996  10054   3229    983    648

instead of
  Node    6, zone   Normal, type      Movable 399568 294127 221558 102119  41019  31560  23996  10054   3229    983    648

The limit has been chosen arbitrary and it is a subject of a future
change should there be a need for that.

While we are at it, also drop the zone lock after each free_list
iteration which will help with the IRQ and page allocator responsiveness
even further as the IRQ lock held time is always bound to those 100k
pages.

[akpm@linux-foundation.org: tweak comment text, per David Hildenbrand]
Link: http://lkml.kernel.org/r/20191025072610.18526-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Roman Gushchin <guro@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-06 08:47:50 -08:00
Michal Hocko
abaed0112c mm, vmstat: hide /proc/pagetypeinfo from normal users
/proc/pagetypeinfo is a debugging tool to examine internal page
allocator state wrt to fragmentation.  It is not very useful for any
other use so normal users really do not need to read this file.

Waiman Long has noticed that reading this file can have negative side
effects because zone->lock is necessary for gathering data and that a)
interferes with the page allocator and its users and b) can lead to hard
lockups on large machines which have very long free_list.

Reduce both issues by simply not exporting the file to regular users.

Link: http://lkml.kernel.org/r/20191025072610.18526-2-mhocko@kernel.org
Fixes: 467c996c1e ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Waiman Long <longman@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Jann Horn <jannh@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-06 08:47:50 -08:00
Song Liu
60fbf0ab5d mm,thp: stats for file backed THP
In preparation for non-shmem THP, this patch adds a few stats and exposes
them in /proc/meminfo, /sys/bus/node/devices/<node>/meminfo, and
/proc/<pid>/task/<tid>/smaps.

This patch is mostly a rewrite of Kirill A.  Shutemov's earlier version:
https://lkml.kernel.org/r/20170126115819.58875-5-kirill.shutemov@linux.intel.com/

Link: http://lkml.kernel.org/r/20190801184244.3169074-5-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:11 -07:00
Thomas Gleixner
457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Konstantin Khlebnikov
e8277b3b52 mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
Commit 58bc4c34d2 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly")
depends on skipping vmstat entries with empty name introduced in
7aaf772723 ("mm: don't show nr_indirectly_reclaimable in
/proc/vmstat") but reverted in b29940c1ab ("mm: rename and change
semantics of nr_indirectly_reclaimable_bytes").

So skipping no longer works and /proc/vmstat has misformatted lines " 0".

This patch simply shows debug counters "nr_tlb_remote_*" for UP.

Link: http://lkml.kernel.org/r/155481488468.467.4295519102880913454.stgit@buzz
Fixes: 58bc4c34d2 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19 09:46:04 -07:00
Greg Kroah-Hartman
d9f7979c92 mm: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Link: http://lkml.kernel.org/r/20190122152151.16139-14-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:17 -08:00
Arun KS
9705bea5f8 mm: convert zone->managed_pages to atomic variable
totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.

This patch converts zone->managed_pages.  Subsequent patches will convert
totalram_panges, totalhigh_pages and eventually managed_page_count_lock
will be removed.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.

Link: http://lkml.kernel.org/r/1542090790-21750-3-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Janne Huttunen
13c9aaf7fa mm/vmstat.c: fix NUMA statistics updates
Scan through the whole array to see if an update is needed.  While we're
at it, use sizeof() to be safe against any possible type changes in the
future.

The bug here is that we wouldn't sync per-cpu counters into global ones
if there was an update of numa_stats for higher cpus.  Highly
theoretical one though because it is much more probable that zone_stats
are updated so we would refresh anyway.  So I wouldn't bother to mark
this for stable, yet something nice to fix.

[mhocko@suse.com: changelog enhancement]
Link: http://lkml.kernel.org/r/1541601517-17282-1-git-send-email-janne.huttunen@nokia.com
Fixes: 1d90ca897c ("mm: update NUMA counter threshold size")
Signed-off-by: Janne Huttunen <janne.huttunen@nokia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18 10:15:10 -08:00
Jann Horn
f0ecf25a09 mm/vmstat.c: assert that vmstat_text is in sync with stat_items_size
Having two gigantic arrays that must manually be kept in sync, including
ifdefs, isn't exactly robust.  To make it easier to catch such issues in
the future, add a BUILD_BUG_ON().

Link: http://lkml.kernel.org/r/20181001143138.95119-3-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:35 -07:00
Johannes Weiner
68d48e6a2d mm: workingset: add vmstat counter for shadow nodes
Make it easier to catch bugs in the shadow node shrinker by adding a
counter for the shadow nodes in circulation.

[akpm@linux-foundation.org: assert that irqs are disabled, for __inc_lruvec_page_state()]
[akpm@linux-foundation.org: s/WARN_ON_ONCE/VM_WARN_ON_ONCE/, per Johannes]
Link: http://lkml.kernel.org/r/20181009184732.762-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:33 -07:00
Johannes Weiner
1899ad18c6 mm: workingset: tell cache transitions from workingset thrashing
Refaults happen during transitions between workingsets as well as in-place
thrashing.  Knowing the difference between the two has a range of
applications, including measuring the impact of memory shortage on the
system performance, as well as the ability to smarter balance pressure
between the filesystem cache and the swap-backed workingset.

During workingset transitions, inactive cache refaults and pushes out
established active cache.  When that active cache isn't stale, however,
and also ends up refaulting, that's bonafide thrashing.

Introduce a new page flag that tells on eviction whether the page has been
active or not in its lifetime.  This bit is then stored in the shadow
entry, to classify refaults as transitioning or thrashing.

How many page->flags does this leave us with on 32-bit?

	20 bits are always page flags

	21 if you have an MMU

	23 with the zone bits for DMA, Normal, HighMem, Movable

	29 with the sparsemem section bits

	30 if PAE is enabled

	31 with this patch.

So on 32-bit PAE, that leaves 1 bit for distinguishing two NUMA nodes.  If
that's not enough, the system can switch to discontigmem and re-gain the 6
or 7 sparsemem section bits.

Link: http://lkml.kernel.org/r/20180828172258.3185-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:32 -07:00
Vlastimil Babka
b29940c1ab mm: rename and change semantics of nr_indirectly_reclaimable_bytes
The vmstat counter NR_INDIRECTLY_RECLAIMABLE_BYTES was introduced by
commit eb59254608 ("mm: introduce NR_INDIRECTLY_RECLAIMABLE_BYTES") with
the goal of accounting objects that can be reclaimed, but cannot be
allocated via a SLAB_RECLAIM_ACCOUNT cache.  This is now possible via
kmalloc() with __GFP_RECLAIMABLE flag, and the dcache external names user
is converted.

The counter is however still useful for accounting direct page allocations
(i.e.  not slab) with a shrinker, such as the ION page pool.  So keep it,
and:

- change granularity to pages to be more like other counters; sub-page
  allocations should be able to use kmalloc
- rename the counter to NR_KERNEL_MISC_RECLAIMABLE
- expose the counter again in vmstat as "nr_kernel_misc_reclaimable"; we can
  again remove the check for not printing "hidden" counters

Link: http://lkml.kernel.org/r/20180731090649.16028-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:32 -07:00
Jann Horn
58bc4c34d2 mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly
5dd0b16cda ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even
on UP") made the availability of the NR_TLB_REMOTE_FLUSH* counters inside
the kernel unconditional to reduce #ifdef soup, but (either to avoid
showing dummy zero counters to userspace, or because that code was missed)
didn't update the vmstat_array, meaning that all following counters would
be shown with incorrect values.

This only affects kernel builds with
CONFIG_VM_EVENT_COUNTERS=y && CONFIG_DEBUG_TLBFLUSH=y && CONFIG_SMP=n.

Link: http://lkml.kernel.org/r/20181001143138.95119-2-jannh@google.com
Fixes: 5dd0b16cda ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05 16:32:05 -07:00
Jann Horn
28e2c4bb99 mm/vmstat.c: fix outdated vmstat_text
7a9cdebdcc ("mm: get rid of vmacache_flush_all() entirely") removed the
VMACACHE_FULL_FLUSHES statistics, but didn't remove the corresponding
entry in vmstat_text.  This causes an out-of-bounds access in
vmstat_show().

Luckily this only affects kernels with CONFIG_DEBUG_VM_VMACACHE=y, which
is probably very rare.

Link: http://lkml.kernel.org/r/20181001143138.95119-1-jannh@google.com
Fixes: 7a9cdebdcc ("mm: get rid of vmacache_flush_all() entirely")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05 16:32:05 -07:00
Sebastian Andrzej Siewior
28557cc106 Revert mm/vmstat.c: fix vmstat_update() preemption BUG
Revert commit c7f26ccfb2 ("mm/vmstat.c: fix vmstat_update() preemption
BUG").  Steven saw a "using smp_processor_id() in preemptible" message
and added a preempt_disable() section around it to keep it quiet.  This
is not the right thing to do it does not fix the real problem.

vmstat_update() is invoked by a kworker on a specific CPU.  This worker
it bound to this CPU.  The name of the worker was "kworker/1:1" so it
should have been a worker which was bound to CPU1.  A worker which can
run on any CPU would have a `u' before the first digit.

smp_processor_id() can be used in a preempt-enabled region as long as
the task is bound to a single CPU which is the case here.  If it could
run on an arbitrary CPU then this is the problem we have an should seek
to resolve.

Not only this smp_processor_id() must not be migrated to another CPU but
also refresh_cpu_vm_stats() which might access wrong per-CPU variables.
Not to mention that other code relies on the fact that such a worker
runs on one specific CPU only.

Therefore revert that commit and we should look instead what broke the
affinity mask of the kworker.

Link: http://lkml.kernel.org/r/20180504104451.20278-1-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-28 11:16:44 -07:00
Christoph Hellwig
fddda2b7b5 proc: introduce proc_create_seq{,_data}
Variants of proc_create{,_data} that directly take a struct seq_operations
argument and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:23:35 +02:00
Roman Gushchin
7aaf772723 mm: don't show nr_indirectly_reclaimable in /proc/vmstat
Don't show nr_indirectly_reclaimable in /proc/vmstat, because there is
no need to export this vm counter to userspace, and some changes are
expected in reclaimable object accounting, which can alter this counter.

Link: http://lkml.kernel.org/r/20180425191422.9159-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-11 17:28:45 -07:00
Roman Gushchin
eb59254608 mm: introduce NR_INDIRECTLY_RECLAIMABLE_BYTES
Patch series "indirectly reclaimable memory", v2.

This patchset introduces the concept of indirectly reclaimable memory
and applies it to fix the issue of when a big number of dentries with
external names can significantly affect the MemAvailable value.

This patch (of 3):

Introduce a concept of indirectly reclaimable memory and adds the
corresponding memory counter and /proc/vmstat item.

Indirectly reclaimable memory is any sort of memory, used by the kernel
(except of reclaimable slabs), which is actually reclaimable, i.e.  will
be released under memory pressure.

The counter is in bytes, as it's not always possible to count such
objects in pages.  The name contains BYTES by analogy to
NR_KERNEL_STACK_KB.

Link: http://lkml.kernel.org/r/20180305133743.12746-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11 10:28:29 -07:00
Steven J. Hill
c7f26ccfb2 mm/vmstat.c: fix vmstat_update() preemption BUG
Attempting to hotplug CPUs with CONFIG_VM_EVENT_COUNTERS enabled can
cause vmstat_update() to report a BUG due to preemption not being
disabled around smp_processor_id().

Discovered on Ubiquiti EdgeRouter Pro with Cavium Octeon II processor.

  BUG: using smp_processor_id() in preemptible [00000000] code:
  kworker/1:1/269
  caller is vmstat_update+0x50/0xa0
  CPU: 0 PID: 269 Comm: kworker/1:1 Not tainted
  4.16.0-rc4-Cavium-Octeon-00009-gf83bbd5-dirty #1
  Workqueue: mm_percpu_wq vmstat_update
  Call Trace:
    show_stack+0x94/0x128
    dump_stack+0xa4/0xe0
    check_preemption_disabled+0x118/0x120
    vmstat_update+0x50/0xa0
    process_one_work+0x144/0x348
    worker_thread+0x150/0x4b8
    kthread+0x110/0x140
    ret_from_kernel_thread+0x14/0x1c

Link: http://lkml.kernel.org/r/1520881552-25659-1-git-send-email-steven.hill@cavium.com
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28 13:42:05 -10:00
Kemi Wang
4518085e12 mm, sysctl: make NUMA stats configurable
This is the second step which introduces a tunable interface that allow
numa stats configurable for optimizing zone_statistics(), as suggested
by Dave Hansen and Ying Huang.

=========================================================================

When page allocation performance becomes a bottleneck and you can
tolerate some possible tool breakage and decreased numa counter
precision, you can do:

	echo 0 > /proc/sys/vm/numa_stat

In this case, numa counter update is ignored.  We can see about
*4.8%*(185->176) drop of cpu cycles per single page allocation and
reclaim on Jesper's page_bench01 (single thread) and *8.1%*(343->315)
drop of cpu cycles per single page allocation and reclaim on Jesper's
page_bench03 (88 threads) running on a 2-Socket Broadwell-based server
(88 threads, 126G memory).

Benchmark link provided by Jesper D Brouer (increase loop times to
10000000):

  https://github.com/netoptimizer/prototype-kernel/tree/master/kernel/mm/bench

=========================================================================

When page allocation performance is not a bottleneck and you want all
tooling to work, you can do:

	echo 1 > /proc/sys/vm/numa_stat

This is system default setting.

Many thanks to Michal Hocko, Dave Hansen, Ying Huang and Vlastimil Babka
for comments to help improve the original patch.

[keescook@chromium.org: make sure mutex is a global static]
  Link: http://lkml.kernel.org/r/20171107213809.GA4314@beast
Link: http://lkml.kernel.org/r/1508290927-8518-1-git-send-email-kemi.wang@intel.com
Signed-off-by: Kemi Wang <kemi.wang@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Ying Huang <ying.huang@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:07 -08:00
Andrey Ryabinin
3a50d14d0d mm: remove unused pgdat->inactive_ratio
Since commit 59dc76b0d4 ("mm: vmscan: reduce size of inactive file
list") 'pgdat->inactive_ratio' is not used, except for printing
"node_inactive_ratio: 0" in /proc/zoneinfo output.

Remove it.

Link: http://lkml.kernel.org/r/20171003152611.27483-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:03 -08:00
Kemi Wang
638032224e mm: consider the number in local CPUs when reading NUMA stats
To avoid deviation, the per cpu number of NUMA stats in
vm_numa_stat_diff[] is included when a user *reads* the NUMA stats.

Since NUMA stats does not be read by users frequently, and kernel does not
need it to make a decision, it will not be a problem to make the readers
more expensive.

Link: http://lkml.kernel.org/r/1503568801-21305-4-git-send-email-kemi.wang@intel.com
Signed-off-by: Kemi Wang <kemi.wang@intel.com>
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Ying Huang <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:47 -07:00
Kemi Wang
1d90ca897c mm: update NUMA counter threshold size
There is significant overhead in cache bouncing caused by zone counters
(NUMA associated counters) update in parallel in multi-threaded page
allocation (suggested by Dave Hansen).

This patch updates NUMA counter threshold to a fixed size of MAX_U16 - 2,
as a small threshold greatly increases the update frequency of the global
counter from local per cpu counter(suggested by Ying Huang).

The rationality is that these statistics counters don't affect the
kernel's decision, unlike other VM counters, so it's not a problem to use
a large threshold.

With this patchset, we see 31.3% drop of CPU cycles(537-->369) for per
single page allocation and reclaim on Jesper's page_bench03 benchmark.

Benchmark provided by Jesper D Brouer(increase loop times to 10000000):
https://github.com/netoptimizer/prototype-kernel/tree/master/kernel/mm/
bench

 Threshold   CPU cycles    Throughput(88 threads)
     32          799         241760478
     64          640         301628829
     125         537         358906028 <==> system by default (base)
     256         468         412397590
     512         428         450550704
     4096        399         482520943
     20000       394         489009617
     30000       395         488017817
     65533       369(-31.3%) 521661345(+45.3%) <==> with this patchset
     N/A         342(-36.3%) 562900157(+56.8%) <==> disable zone_statistics

Link: http://lkml.kernel.org/r/1503568801-21305-3-git-send-email-kemi.wang@intel.com
Signed-off-by: Kemi Wang <kemi.wang@intel.com>
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Ying Huang <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:47 -07:00
Kemi Wang
3a321d2a3d mm: change the call sites of numa statistics items
Patch series "Separate NUMA statistics from zone statistics", v2.

Each page allocation updates a set of per-zone statistics with a call to
zone_statistics().  As discussed in 2017 MM summit, these are a
substantial source of overhead in the page allocator and are very rarely
consumed.  This significant overhead in cache bouncing caused by zone
counters (NUMA associated counters) update in parallel in multi-threaded
page allocation (pointed out by Dave Hansen).

A link to the MM summit slides:
  http://people.netfilter.org/hawk/presentations/MM-summit2017/MM-summit2017-JesperBrouer.pdf

To mitigate this overhead, this patchset separates NUMA statistics from
zone statistics framework, and update NUMA counter threshold to a fixed
size of MAX_U16 - 2, as a small threshold greatly increases the update
frequency of the global counter from local per cpu counter (suggested by
Ying Huang).  The rationality is that these statistics counters don't
need to be read often, unlike other VM counters, so it's not a problem
to use a large threshold and make readers more expensive.

With this patchset, we see 31.3% drop of CPU cycles(537-->369, see
below) for per single page allocation and reclaim on Jesper's
page_bench03 benchmark.  Meanwhile, this patchset keeps the same style
of virtual memory statistics with little end-user-visible effects (only
move the numa stats to show behind zone page stats, see the first patch
for details).

I did an experiment of single page allocation and reclaim concurrently
using Jesper's page_bench03 benchmark on a 2-Socket Broadwell-based
server (88 processors with 126G memory) with different size of threshold
of pcp counter.

Benchmark provided by Jesper D Brouer(increase loop times to 10000000):
  https://github.com/netoptimizer/prototype-kernel/tree/master/kernel/mm/bench

   Threshold   CPU cycles    Throughput(88 threads)
      32        799         241760478
      64        640         301628829
      125       537         358906028 <==> system by default
      256       468         412397590
      512       428         450550704
      4096      399         482520943
      20000     394         489009617
      30000     395         488017817
      65533     369(-31.3%) 521661345(+45.3%) <==> with this patchset
      N/A       342(-36.3%) 562900157(+56.8%) <==> disable zone_statistics

This patch (of 3):

In this patch, NUMA statistics is separated from zone statistics
framework, all the call sites of NUMA stats are changed to use
numa-stats-specific functions, it does not have any functionality change
except that the number of NUMA stats is shown behind zone page stats
when users *read* the zone info.

E.g. cat /proc/zoneinfo
    ***Base***                           ***With this patch***
nr_free_pages 3976                         nr_free_pages 3976
nr_zone_inactive_anon 0                    nr_zone_inactive_anon 0
nr_zone_active_anon 0                      nr_zone_active_anon 0
nr_zone_inactive_file 0                    nr_zone_inactive_file 0
nr_zone_active_file 0                      nr_zone_active_file 0
nr_zone_unevictable 0                      nr_zone_unevictable 0
nr_zone_write_pending 0                    nr_zone_write_pending 0
nr_mlock     0                             nr_mlock     0
nr_page_table_pages 0                      nr_page_table_pages 0
nr_kernel_stack 0                          nr_kernel_stack 0
nr_bounce    0                             nr_bounce    0
nr_zspages   0                             nr_zspages   0
numa_hit 0                                *nr_free_cma  0*
numa_miss 0                                numa_hit     0
numa_foreign 0                             numa_miss    0
numa_interleave 0                          numa_foreign 0
numa_local   0                             numa_interleave 0
numa_other   0                             numa_local   0
*nr_free_cma 0*                            numa_other 0
    ...                                        ...
vm stats threshold: 10                     vm stats threshold: 10
    ...                                        ...

The next patch updates the numa stats counter size and threshold.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1503568801-21305-2-git-send-email-kemi.wang@intel.com
Signed-off-by: Kemi Wang <kemi.wang@intel.com>
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Ying Huang <ying.huang@intel.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:47 -07:00
Huang Ying
cbc65df240 mm, swap: add swap readahead hit statistics
Patch series "mm, swap: VMA based swap readahead", v4.

The swap readahead is an important mechanism to reduce the swap in
latency.  Although pure sequential memory access pattern isn't very
popular for anonymous memory, the space locality is still considered
valid.

In the original swap readahead implementation, the consecutive blocks in
swap device are readahead based on the global space locality estimation.
But the consecutive blocks in swap device just reflect the order of page
reclaiming, don't necessarily reflect the access pattern in virtual
memory space.  And the different tasks in the system may have different
access patterns, which makes the global space locality estimation
incorrect.

In this patchset, when page fault occurs, the virtual pages near the
fault address will be readahead instead of the swap slots near the fault
swap slot in swap device.  This avoid to readahead the unrelated swap
slots.  At the same time, the swap readahead is changed to work on
per-VMA from globally.  So that the different access patterns of the
different VMAs could be distinguished, and the different readahead
policy could be applied accordingly.  The original core readahead
detection and scaling algorithm is reused, because it is an effect
algorithm to detect the space locality.

In addition to the swap readahead changes, some new sysfs interface is
added to show the efficiency of the readahead algorithm and some other
swap statistics.

This new implementation will incur more small random read, on SSD, the
improved correctness of estimation and readahead target should beat the
potential increased overhead, this is also illustrated in the test
results below.  But on HDD, the overhead may beat the benefit, so the
original implementation will be used by default.

The test and result is as follow,

Common test condition
=====================

Test Machine: Xeon E5 v3 (2 sockets, 72 threads, 32G RAM)
Swap device: NVMe disk

Micro-benchmark with combined access pattern
============================================

vm-scalability, sequential swap test case, 4 processes to eat 50G
virtual memory space, repeat the sequential memory writing until 300
seconds.  The first round writing will trigger swap out, the following
rounds will trigger sequential swap in and out.

At the same time, run vm-scalability random swap test case in
background, 8 processes to eat 30G virtual memory space, repeat the
random memory write until 300 seconds.  This will trigger random swap-in
in the background.

This is a combined workload with sequential and random memory accessing
at the same time.  The result (for sequential workload) is as follow,

			Base		Optimized
			----		---------
throughput		345413 KB/s	414029 KB/s (+19.9%)
latency.average		97.14 us	61.06 us (-37.1%)
latency.50th		2 us		1 us
latency.60th		2 us		1 us
latency.70th		98 us		2 us
latency.80th		160 us		2 us
latency.90th		260 us		217 us
latency.95th		346 us		369 us
latency.99th		1.34 ms		1.09 ms
ra_hit%			52.69%		99.98%

The original swap readahead algorithm is confused by the background
random access workload, so readahead hit rate is lower.  The VMA-base
readahead algorithm works much better.

Linpack
=======

The test memory size is bigger than RAM to trigger swapping.

			Base		Optimized
			----		---------
elapsed_time		393.49 s	329.88 s (-16.2%)
ra_hit%			86.21%		98.82%

The score of base and optimized kernel hasn't visible changes.  But the
elapsed time reduced and readahead hit rate improved, so the optimized
kernel runs better for startup and tear down stages.  And the absolute
value of readahead hit rate is high, shows that the space locality is
still valid in some practical workloads.

This patch (of 5):

The statistics for total readahead pages and total readahead hits are
recorded and exported via the following sysfs interface.

/sys/kernel/mm/swap/ra_hits
/sys/kernel/mm/swap/ra_total

With them, the efficiency of the swap readahead could be measured, so
that the swap readahead algorithm and parameters could be tuned
accordingly.

[akpm@linux-foundation.org: don't display swap stats if CONFIG_SWAP=n]
Link: http://lkml.kernel.org/r/20170807054038.1843-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:29 -07:00
SeongJae Park
f113e64121 mm/vmstat.c: fix wrong comment
Comment for pagetypeinfo_showblockcount() is mistakenly duplicated from
pagetypeinfo_show_free()'s comment.  This commit fixes it.

Link: http://lkml.kernel.org/r/20170809185816.11244-1-sj38.park@gmail.com
Fixes: 467c996c1e ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo")
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:29 -07:00
Wen Yang
88d6ac40c1 mm/vmstat: fix divide error at __fragmentation_index
When order is -1 or too big, *1UL << order* will be 0, which will cause
a divide error.  Although it seems that all callers of
__fragmentation_index() will only do so with a valid order, the patch
can make it more robust.

Should prevent reoccurrences of
https://bugzilla.kernel.org/show_bug.cgi?id=196555

Link: http://lkml.kernel.org/r/1501751520-2598-1-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:29 -07:00
Michal Hocko
c41f012ade mm: rename global_page_state to global_zone_page_state
global_page_state is error prone as a recent bug report pointed out [1].
It only returns proper values for zone based counters as the enum it
gets suggests.  We already have global_node_page_state so let's rename
global_page_state to global_zone_page_state to be more explicit here.
All existing users seems to be correct:

$ git grep "global_page_state(NR_" | sed 's@.*(\(NR_[A-Z_]*\)).*@\1@' | sort | uniq -c
      2 NR_BOUNCE
      2 NR_FREE_CMA_PAGES
     11 NR_FREE_PAGES
      1 NR_KERNEL_STACK_KB
      1 NR_MLOCK
      2 NR_PAGETABLE

This patch shouldn't introduce any functional change.

[1] http://lkml.kernel.org/r/201707260628.v6Q6SmaS030814@www262.sakura.ne.jp

Link: http://lkml.kernel.org/r/20170801134256.5400-2-hannes@cmpxchg.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:29 -07:00
Huang Ying
fe490cc0fe mm, THP, swap: add THP swapping out fallback counting
When swapping out THP (Transparent Huge Page), instead of swapping out
the THP as a whole, sometimes we have to fallback to split the THP into
normal pages before swapping, because no free swap clusters are
available, or cgroup limit is exceeded, etc.  To count the number of the
fallback, a new VM event THP_SWPOUT_FALLBACK is added, and counted when
we fallback to split the THP.

Link: http://lkml.kernel.org/r/20170724051840.2309-13-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:28 -07:00
Huang Ying
225311a464 mm: test code to write THP to swap device as a whole
To support delay splitting THP (Transparent Huge Page) after swapped
out, we need to enhance swap writing code to support to write a THP as a
whole.  This will improve swap write IO performance.

As Ming Lei <ming.lei@redhat.com> pointed out, this should be based on
multipage bvec support, which hasn't been merged yet.  So this patch is
only for testing the functionality of the other patches in the series.
And will be reimplemented after multipage bvec support is merged.

Link: http://lkml.kernel.org/r/20170724051840.2309-7-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Shaohua Li <shli@kernel.org>
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:28 -07:00
Vinayak Menon
727c080f03 mm: avoid taking zone lock in pagetypeinfo_showmixed()
pagetypeinfo_showmixedcount_print is found to take a lot of time to
complete and it does this holding the zone lock and disabling
interrupts.  In some cases it is found to take more than a second (On a
2.4GHz,8Gb RAM,arm64 cpu).

Avoid taking the zone lock similar to what is done by read_page_owner,
which means possibility of inaccurate results.

Link: http://lkml.kernel.org/r/1498045643-12257-1-git-send-email-vinmenon@codeaurora.org
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: zhongjiang <zhongjiang@huawei.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:32 -07:00
Johannes Weiner
385386cff4 mm: vmstat: move slab statistics from zone to node counters
Patch series "mm: per-lruvec slab stats"

Josef is working on a new approach to balancing slab caches and the page
cache.  For this to work, he needs slab cache statistics on the lruvec
level.  These patches implement that by adding infrastructure that
allows updating and reading generic VM stat items per lruvec, then
switches some existing VM accounting sites, including the slab
accounting ones, to this new cgroup-aware API.

I'll follow up with more patches on this, because there is actually
substantial simplification that can be done to the memory controller
when we replace private memcg accounting with making the existing VM
accounting sites cgroup-aware.  But this is enough for Josef to base his
slab reclaim work on, so here goes.

This patch (of 5):

To re-implement slab cache vs.  page cache balancing, we'll need the
slab counters at the lruvec level, which, ever since lru reclaim was
moved from the zone to the node, is the intersection of the node, not
the zone, and the memcg.

We could retain the per-zone counters for when the page allocator dumps
its memory information on failures, and have counters on both levels -
which on all but NUMA node 0 is usually redundant.  But let's keep it
simple for now and just move them.  If anybody complains we can restore
the per-zone counters.

[hannes@cmpxchg.org: fix oops]
  Link: http://lkml.kernel.org/r/20170605183511.GA8915@cmpxchg.org
Link: http://lkml.kernel.org/r/20170530181724.27197-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:35 -07:00
Konstantin Khlebnikov
8e675f7af5 mm/oom_kill: count global and memory cgroup oom kills
Show count of oom killer invocations in /proc/vmstat and count of
processes killed in memory cgroup in knob "memory.events" (in
memory.oom_control for v1 cgroup).

Also describe difference between "oom" and "oom_kill" in memory cgroup
documentation.  Currently oom in memory cgroup kills tasks iff shortage
has happened inside page fault.

These counters helps in monitoring oom kills - for now the only way is
grepping for magic words in kernel log.

[akpm@linux-foundation.org: fix for mem_cgroup_count_vm_event() rename]
[akpm@linux-foundation.org: fix comment, per Konstantin]
Link: http://lkml.kernel.org/r/149570810989.203600.9492483715840752937.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Roman Guschin <guroan@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:35 -07:00
Michal Hocko
d336e94e44 mm, vmstat: skip reporting offline pages in pagetypeinfo
pagetypeinfo_showblockcount_print skips over invalid pfns but it would
report pages which are offline because those have a valid pfn.  Their
migrate type is misleading at best.

Now that we have pfn_to_online_page() we can use it instead of
pfn_valid() and fix this.

[mhocko@suse.com: fix build]
  Link: http://lkml.kernel.org/r/20170519072225.GA13041@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170515085827.16474-11-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Joonsoo Kim <js1304@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Tobias Regnery <tobias.regnery@gmail.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:32 -07:00
Anshuman Khandual
9d85e15f1d mm/vmstat.c: standardize file operations variable names
Standardize the file operation variable names related to all four memory
management /proc interface files.  Also change all the symbol
permissions (S_IRUGO) into octal permissions (0444) as it got complaints
from checkpatch.pl.  This does not create any functional change to the
interface.

Link: http://lkml.kernel.org/r/20170427030632.8588-1-khandual@linux.vnet.ibm.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:31 -07:00
Reza Arbab
8d35bb3106 mm, vmstat: Remove spurious WARN() during zoneinfo print
After commit e2ecc8a79e ("mm, vmstat: print non-populated zones in
zoneinfo"), /proc/zoneinfo will show unpopulated zones.

A memoryless node, having no populated zones at all, was previously
ignored, but will now trigger the WARN() in is_zone_first_populated().

Remove this warning, as its only purpose was to warn of a situation that
has since been enabled.

Aside: The "per-node stats" are still printed under the first populated
zone, but that's not necessarily the first stanza any more.  I'm not
sure which criteria is more important with regard to not breaking
parsers, but it looks a little weird to the eye.

Fixes:  e2ecc8a79e ("mm, vmstat: print node-based stats in zoneinfo file")
Link: http://lkml.kernel.org/r/1493854905-10918-1-git-send-email-arbab@linux.vnet.ibm.com
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-12 15:57:15 -07:00
David Rientjes
7dfb8bf3b9 mm, vmstat: suppress pcp stats for unpopulated zones in zoneinfo
After "mm, vmstat: print non-populated zones in zoneinfo",
/proc/zoneinfo will show unpopulated zones.

The per-cpu pageset statistics are not relevant for unpopulated zones
and can be potentially lengthy, so supress them when they are not
interesting.

Also moves lowmem reserve protection information above pcp stats since
it is relevant for all zones per vm.lowmem_reserve_ratio.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1703061400500.46428@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 15:52:08 -07:00
David Rientjes
b2bd859819 mm, vmstat: print non-populated zones in zoneinfo
Initscripts can use the information (protection levels) from
/proc/zoneinfo to configure vm.lowmem_reserve_ratio at boot.

vm.lowmem_reserve_ratio is an array of ratios for each configured zone
on the system.  If a zone is not populated on an arch, /proc/zoneinfo
suppresses its output.

This results in there not being a 1:1 mapping between the set of zones
emitted by /proc/zoneinfo and the zones configured by
vm.lowmem_reserve_ratio.

This patch shows statistics for non-populated zones in /proc/zoneinfo.
The zones exist and hold a spot in the vm.lowmem_reserve_ratio array.
Without this patch, it is not possible to determine which index in the
array controls which zone if one or more zones on the system are not
populated.

Remaining users of walk_zones_in_node() are unchanged.  Files such as
/proc/pagetypeinfo require certain zone data to be initialized properly
for display, which is not done for unpopulated zones.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1703031451310.98023@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 15:52:08 -07:00
Shaohua Li
f7ad2a6cb9 mm: move MADV_FREE pages into LRU_INACTIVE_FILE list
madv()'s MADV_FREE indicate pages are 'lazyfree'.  They are still
anonymous pages, but they can be freed without pageout.  To distinguish
these from normal anonymous pages, we clear their SwapBacked flag.

MADV_FREE pages could be freed without pageout, so they pretty much like
used once file pages.  For such pages, we'd like to reclaim them once
there is memory pressure.  Also it might be unfair reclaiming MADV_FREE
pages always before used once file pages and we definitively want to
reclaim the pages before other anonymous and file pages.

To speed up MADV_FREE pages reclaim, we put the pages into
LRU_INACTIVE_FILE list.  The rationale is LRU_INACTIVE_FILE list is tiny
nowadays and should be full of used once file pages.  Reclaiming
MADV_FREE pages will not have much interfere of anonymous and active
file pages.  And the inactive file pages and MADV_FREE pages will be
reclaimed according to their age, so we don't reclaim too many MADV_FREE
pages too.  Putting the MADV_FREE pages into LRU_INACTIVE_FILE_LIST also
means we can reclaim the pages without swap support.  This idea is
suggested by Johannes.

This patch doesn't move MADV_FREE pages to LRU_INACTIVE_FILE list yet to
avoid bisect failure, next patch will do it.

The patch is based on Minchan's original patch.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/2f87063c1e9354677b7618c647abde77b07561e5.1487965799.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 15:52:08 -07:00
Johannes Weiner
c822f6223d mm: delete NR_PAGES_SCANNED and pgdat_reclaimable()
NR_PAGES_SCANNED counts number of pages scanned since the last page free
event in the allocator.  This was used primarily to measure the
reclaimability of zones and nodes, and determine when reclaim should
give up on them.  In that role, it has been replaced in the preceding
patches by a different mechanism.

Being implemented as an efficient vmstat counter, it was automatically
exported to userspace as well.  It's however unlikely that anyone
outside the kernel is using this counter in any meaningful way.

Remove the counter and the unused pgdat_reclaimable().

Link: http://lkml.kernel.org/r/20170228214007.5621-8-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 15:52:08 -07:00
Johannes Weiner
c73322d098 mm: fix 100% CPU kswapd busyloop on unreclaimable nodes
Patch series "mm: kswapd spinning on unreclaimable nodes - fixes and
cleanups".

Jia reported a scenario in which the kswapd of a node indefinitely spins
at 100% CPU usage.  We have seen similar cases at Facebook.

The kernel's current method of judging its ability to reclaim a node (or
whether to back off and sleep) is based on the amount of scanned pages
in proportion to the amount of reclaimable pages.  In Jia's and our
scenarios, there are no reclaimable pages in the node, however, and the
condition for backing off is never met.  Kswapd busyloops in an attempt
to restore the watermarks while having nothing to work with.

This series reworks the definition of an unreclaimable node based not on
scanning but on whether kswapd is able to actually reclaim pages in
MAX_RECLAIM_RETRIES (16) consecutive runs.  This is the same criteria
the page allocator uses for giving up on direct reclaim and invoking the
OOM killer.  If it cannot free any pages, kswapd will go to sleep and
leave further attempts to direct reclaim invocations, which will either
make progress and re-enable kswapd, or invoke the OOM killer.

Patch #1 fixes the immediate problem Jia reported, the remainder are
smaller fixlets, cleanups, and overall phasing out of the old method.

Patch #6 is the odd one out.  It's a nice cleanup to get_scan_count(),
and directly related to #5, but in itself not relevant to the series.

If the whole series is too ambitious for 4.11, I would consider the
first three patches fixes, the rest cleanups.

This patch (of 9):

Jia He reports a problem with kswapd spinning at 100% CPU when
requesting more hugepages than memory available in the system:

$ echo 4000 >/proc/sys/vm/nr_hugepages

top - 13:42:59 up  3:37,  1 user,  load average: 1.09, 1.03, 1.01
Tasks:   1 total,   1 running,   0 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us, 12.5 sy,  0.0 ni, 85.5 id,  2.0 wa,  0.0 hi,  0.0 si,  0.0 st
KiB Mem:  31371520 total, 30915136 used,   456384 free,      320 buffers
KiB Swap:  6284224 total,   115712 used,  6168512 free.    48192 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
   76 root      20   0       0      0      0 R 100.0 0.000 217:17.29 kswapd3

At that time, there are no reclaimable pages left in the node, but as
kswapd fails to restore the high watermarks it refuses to go to sleep.

Kswapd needs to back away from nodes that fail to balance.  Up until
commit 1d82de618d ("mm, vmscan: make kswapd reclaim in terms of
nodes") kswapd had such a mechanism.  It considered zones whose
theoretically reclaimable pages it had reclaimed six times over as
unreclaimable and backed away from them.  This guard was erroneously
removed as the patch changed the definition of a balanced node.

However, simply restoring this code wouldn't help in the case reported
here: there *are* no reclaimable pages that could be scanned until the
threshold is met.  Kswapd would stay awake anyway.

Introduce a new and much simpler way of backing off.  If kswapd runs
through MAX_RECLAIM_RETRIES (16) cycles without reclaiming a single
page, make it back off from the node.  This is the same number of shots
direct reclaim takes before declaring OOM.  Kswapd will go to sleep on
that node until a direct reclaimer manages to reclaim some pages, thus
proving the node reclaimable again.

[hannes@cmpxchg.org: check kswapd failure against the cumulative nr_reclaimed count]
  Link: http://lkml.kernel.org/r/20170306162410.GB2090@cmpxchg.org
[shakeelb@google.com: fix condition for throttle_direct_reclaim]
  Link: http://lkml.kernel.org/r/20170314183228.20152-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20170228214007.5621-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Jia He <hejianet@gmail.com>
Tested-by: Jia He <hejianet@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 15:52:07 -07:00
Michal Hocko
80d136e138 mm: make mm_percpu_wq non freezable
Geert has reported a freeze during PM resume and some additional
debugging has shown that the device_resume worker cannot make a forward
progress because it waits for an event which is stuck waiting in
drain_all_pages:

  INFO: task kworker/u4:0:5 blocked for more than 120 seconds.
        Not tainted 4.11.0-rc7-koelsch-00029-g005882e53d62f25d-dirty #3476
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  kworker/u4:0    D    0     5      2 0x00000000
  Workqueue: events_unbound async_run_entry_fn
    __schedule
    schedule
    schedule_timeout
    wait_for_common
    dpm_wait_for_superior
    device_resume
    async_resume
    async_run_entry_fn
    process_one_work
    worker_thread
    kthread
  [...]
  bash            D    0  1703   1694 0x00000000
    __schedule
    schedule
    schedule_timeout
    wait_for_common
    flush_work
    drain_all_pages
    start_isolate_page_range
    alloc_contig_range
    cma_alloc
    __alloc_from_contiguous
    cma_allocator_alloc
    __dma_alloc
    arm_dma_alloc
    sh_eth_ring_init
    sh_eth_open
    sh_eth_resume
    dpm_run_callback
    device_resume
    dpm_resume
    dpm_resume_end
    suspend_devices_and_enter
    pm_suspend
    state_store
    kernfs_fop_write
    __vfs_write
    vfs_write
    SyS_write
  [...]
  Showing busy workqueues and worker pools:
  [...]
  workqueue mm_percpu_wq: flags=0xc
    pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=0/0
      delayed: drain_local_pages_wq, vmstat_update
    pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=0/0
      delayed: drain_local_pages_wq BAR(1703), vmstat_update

Tetsuo has properly noted that mm_percpu_wq is created as WQ_FREEZABLE
so it is frozen this early during resume so we are effectively
deadlocked.  Fix this by dropping WQ_FREEZABLE when creating
mm_percpu_wq.  We really want to have it operational all the time.

Fixes: ce612879dd ("mm: move pcp and lru-pcp draining into single wq")
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-19 15:53:48 -07:00
Michal Hocko
ce612879dd mm: move pcp and lru-pcp draining into single wq
We currently have 2 specific WQ_RECLAIM workqueues in the mm code.
vmstat_wq for updating pcp stats and lru_add_drain_wq dedicated to drain
per cpu lru caches.  This seems more than necessary because both can run
on a single WQ.  Both do not block on locks requiring a memory
allocation nor perform any allocations themselves.  We will save one
rescuer thread this way.

On the other hand drain_all_pages() queues work on the system wq which
doesn't have rescuer and so this depend on memory allocation (when all
workers are stuck allocating and new ones cannot be created).

Initially we thought this would be more of a theoretical problem but
Hugh Dickins has reported:

: 4.11-rc has been giving me hangs after hours of swapping load.  At
: first they looked like memory leaks ("fork: Cannot allocate memory");
: but for no good reason I happened to do "cat /proc/sys/vm/stat_refresh"
: before looking at /proc/meminfo one time, and the stat_refresh stuck
: in D state, waiting for completion of flush_work like many kworkers.
: kthreadd waiting for completion of flush_work in drain_all_pages().

This worker should be using WQ_RECLAIM as well in order to guarantee a
forward progress.  We can reuse the same one as for lru draining and
vmstat.

Link: http://lkml.kernel.org/r/20170307131751.24936-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Yang Li <pku.leo@gmail.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-08 00:47:49 -07:00
Michal Hocko
597b7305dd mm: move mm_percpu_wq initialization earlier
Yang Li has reported that drain_all_pages triggers a WARN_ON which means
that this function is called earlier than the mm_percpu_wq is
initialized on arm64 with CMA configured:

  WARNING: CPU: 2 PID: 1 at mm/page_alloc.c:2423 drain_all_pages+0x244/0x25c
  Modules linked in:
  CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc1-next-20170310-00027-g64dfbc5 #127
  Hardware name: Freescale Layerscape 2088A RDB Board (DT)
  task: ffffffc07c4a6d00 task.stack: ffffffc07c4a8000
  PC is at drain_all_pages+0x244/0x25c
  LR is at start_isolate_page_range+0x14c/0x1f0
  [...]
   drain_all_pages+0x244/0x25c
   start_isolate_page_range+0x14c/0x1f0
   alloc_contig_range+0xec/0x354
   cma_alloc+0x100/0x1fc
   dma_alloc_from_contiguous+0x3c/0x44
   atomic_pool_init+0x7c/0x208
   arm64_dma_init+0x44/0x4c
   do_one_initcall+0x38/0x128
   kernel_init_freeable+0x1a0/0x240
   kernel_init+0x10/0xfc
   ret_from_fork+0x10/0x20

Fix this by moving the whole setup_vmstat which is an initcall right now
to init_mm_internals which will be called right after the WQ subsystem
is initialized.

Link: http://lkml.kernel.org/r/20170315164021.28532-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Yang Li <pku.leo@gmail.com>
Tested-by: Yang Li <pku.leo@gmail.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-31 17:13:30 -07:00
Yisheng Xie
ce9311cf95 mm/vmstats: add thp_split_pud event for clarity
We added support for PUD-sized transparent hugepages, however we count
the event "thp split pud" into thp_split_pmd event.

To separate the event count of thp split pud from pmd, add a new event
named thp_split_pud.

Link: http://lkml.kernel.org/r/1488282380-5076-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 17:01:10 -08:00
David Rientjes
7f354a548d mm, compaction: add vmstats for kcompactd work
A "compact_daemon_wake" vmstat exists that represents the number of
times kcompactd has woken up.  This doesn't represent how much work it
actually did, though.

It's useful to understand how much compaction work is being done by
kcompactd versus other methods such as direct compaction and explicitly
triggered per-node (or system) compaction.

This adds two new vmstats: "compact_daemon_migrate_scanned" and
"compact_daemon_free_scanned" to represent the number of pages kcompactd
has scanned as part of its migration scanner and freeing scanner,
respectively.

These values are still accounted for in the general
"compact_migrate_scanned" and "compact_free_scanned" for compatibility.

It could be argued that explicitly triggered compaction could also be
tracked separately, and that could be added if others find it useful.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1612071749390.69852@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:29 -08:00
Sebastian Andrzej Siewior
5438da977f mm/vmstat: Convert to hotplug state machine
Install the callbacks via the state machine, but do not invoke them as we
can initialize the node state without calling the callbacks on all online
CPUs.

start_shepherd_timer() is now called outside the get_online_cpus() block
which is safe as it only operates on cpu possible mask.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20161129145221.ffc3kg3hd7lxiwj6@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-02 00:52:35 +01:00
Sebastian Andrzej Siewior
4c501327b4 mm/vmstat: Avoid on each online CPU loops
Both iterations over online cpus can be replaced by the proper node
specific functions.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20161129145113.fn3lw5aazjjvdrr3@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-02 00:52:35 +01:00
Sebastian Andrzej Siewior
76f290935b mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead()
Both functions are called with protection against cpu hotplug already so
*_online_cpus() could be dropped.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20161126231350.10321-8-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-02 00:52:35 +01:00
Joe Perches
75ba1d07fd seq/proc: modify seq_put_decimal_[u]ll to take a const char *, not char
Allow some seq_puts removals by taking a string instead of a single
char.

[akpm@linux-foundation.org: update vmstat_show(), per Joe]
Link: http://lkml.kernel.org/r/667e1cf3d436de91a5698170a1e98d882905e956.1470704995.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Joe Perches <joe@perches.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:30 -07:00
Alexey Dobriyan
68ba0326b4 proc: much faster /proc/vmstat
Every current KDE system has process named ksysguardd polling files
below once in several seconds:

	$ strace -e trace=open -p $(pidof ksysguardd)
	Process 1812 attached
	open("/etc/mtab", O_RDONLY|O_CLOEXEC)   = 8
	open("/etc/mtab", O_RDONLY|O_CLOEXEC)   = 8
	open("/proc/net/dev", O_RDONLY)         = 8
	open("/proc/net/wireless", O_RDONLY)    = -1 ENOENT (No such file or directory)
	open("/proc/stat", O_RDONLY)            = 8
	open("/proc/vmstat", O_RDONLY)          = 8

Hell knows what it is doing but speed up reading /proc/vmstat by 33%!

Benchmark is open+read+close 1.000.000 times.

			BEFORE
$ perf stat -r 10 taskset -c 3 ./proc-vmstat

 Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs):

      13146.768464      task-clock (msec)         #    0.960 CPUs utilized            ( +-  0.60% )
                15      context-switches          #    0.001 K/sec                    ( +-  1.41% )
                 1      cpu-migrations            #    0.000 K/sec                    ( +- 11.11% )
               104      page-faults               #    0.008 K/sec                    ( +-  0.57% )
    45,489,799,349      cycles                    #    3.460 GHz                      ( +-  0.03% )
     9,970,175,743      stalled-cycles-frontend   #   21.92% frontend cycles idle     ( +-  0.10% )
     2,800,298,015      stalled-cycles-backend    #   6.16% backend cycles idle       ( +-  0.32% )
    79,241,190,850      instructions              #    1.74  insn per cycle
                                                  #    0.13  stalled cycles per insn  ( +-  0.00% )
    17,616,096,146      branches                  # 1339.956 M/sec                    ( +-  0.00% )
       176,106,232      branch-misses             #    1.00% of all branches          ( +-  0.18% )

      13.691078109 seconds time elapsed                                          ( +-  0.03% )
      ^^^^^^^^^^^^

			AFTER
$ perf stat -r 10 taskset -c 3 ./proc-vmstat

 Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs):

       8688.353749      task-clock (msec)         #    0.950 CPUs utilized            ( +-  1.25% )
                10      context-switches          #    0.001 K/sec                    ( +-  2.13% )
                 1      cpu-migrations            #    0.000 K/sec
               104      page-faults               #    0.012 K/sec                    ( +-  0.56% )
    30,384,010,730      cycles                    #    3.497 GHz                      ( +-  0.07% )
    12,296,259,407      stalled-cycles-frontend   #   40.47% frontend cycles idle     ( +-  0.13% )
     3,370,668,651      stalled-cycles-backend    #  11.09% backend cycles idle       ( +-  0.69% )
    28,969,052,879      instructions              #    0.95  insn per cycle
                                                  #    0.42  stalled cycles per insn  ( +-  0.01% )
     6,308,245,891      branches                  #  726.058 M/sec                    ( +-  0.00% )
       214,685,502      branch-misses             #    3.40% of all branches          ( +-  0.26% )

       9.146081052 seconds time elapsed                                          ( +-  0.07% )
       ^^^^^^^^^^^

vsnprintf() is slow because:

1. format_decode() is busy looking for format specifier: 2 branches
   per character (not in this case, but in others)

2. approximately million branches while parsing format mini language
   and everywhere

3.  just look at what string() does /proc/vmstat is good case because
   most of its content are strings

Link: http://lkml.kernel.org/r/20160806125455.GA1187@p183.telecom.by
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:30 -07:00
Tim Chen
03e86dba5b cpu: fix node state for whether it contains CPU
In current kernel code, we only call node_set_state(cpu_to_node(cpu),
N_CPU) when a cpu is hot plugged.  But we do not set the node state for
N_CPU when the cpus are brought online during boot.

So this could lead to failure when we check to see if a node contains
cpu with node_state(node_id, N_CPU).

One use case is in the node_reclaime function:

        /*
         * Only run node reclaim on the local node or on nodes that do
         * not
         * have associated processors. This will favor the local
         * processor
         * over remote processors and spread off node memory allocations
         * as wide as possible.
         */
        if (node_state(pgdat->node_id, N_CPU) && pgdat->node_id !=
                numa_node_id())
                return NODE_RECLAIM_NOSCAN;

I instrumented the kernel to call this function after boot and it always
returns 0 on a x86 desktop machine until I apply the attached patch.

   int num_cpu_node(void)
   {
       int i, nr_cpu_nodes = 0;

       for_each_node(i) {
               if (node_state(i, N_CPU))
                       ++ nr_cpu_nodes;
       }

       return nr_cpu_nodes;
   }

Fix this by checking each node for online CPU when we initialize
vmstat that's responsible for maintaining node state.

Link: http://lkml.kernel.org/r/20160829175922.GA21775@linux.intel.com
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: <Huang@linux.intel.com>
Cc: Ying <ying.huang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Joonsoo Kim
e2f612e673 mm/page_owner: move page_owner specific function to page_owner.c
There is no reason that page_owner specific function resides on
vmstat.c.

Link: http://lkml.kernel.org/r/1471315879-32294-4-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Mel Gorman
5a1c84b404 mm: remove reclaim and compaction retry approximations
If per-zone LRU accounting is available then there is no point
approximating whether reclaim and compaction should retry based on pgdat
statistics.  This is effectively a revert of "mm, vmstat: remove zone
and node double accounting by approximating retries" with the difference
that inactive/active stats are still available.  This preserves the
history of why the approximation was retried and why it had to be
reverted to handle OOM kills on 32-bit systems.

Link: http://lkml.kernel.org/r/1469110261-7365-4-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Minchan Kim
71c799f498 mm: add per-zone lru list stat
When I did stress test with hackbench, I got OOM message frequently
which didn't ever happen in zone-lru.

  gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0
  ..
  ..
   __alloc_pages_nodemask+0xe52/0xe60
   ? new_slab+0x39c/0x3b0
   new_slab+0x39c/0x3b0
   ___slab_alloc.constprop.87+0x6da/0x840
   ? __alloc_skb+0x3c/0x260
   ? _raw_spin_unlock_irq+0x27/0x60
   ? trace_hardirqs_on_caller+0xec/0x1b0
   ? finish_task_switch+0xa6/0x220
   ? poll_select_copy_remaining+0x140/0x140
   __slab_alloc.isra.81.constprop.86+0x40/0x6d
   ? __alloc_skb+0x3c/0x260
   kmem_cache_alloc+0x22c/0x260
   ? __alloc_skb+0x3c/0x260
   __alloc_skb+0x3c/0x260
   alloc_skb_with_frags+0x4e/0x1a0
   sock_alloc_send_pskb+0x16a/0x1b0
   ? wait_for_unix_gc+0x31/0x90
   ? alloc_set_pte+0x2ad/0x310
   unix_stream_sendmsg+0x28d/0x340
   sock_sendmsg+0x2d/0x40
   sock_write_iter+0x6c/0xc0
   __vfs_write+0xc0/0x120
   vfs_write+0x9b/0x1a0
   ? __might_fault+0x49/0xa0
   SyS_write+0x44/0x90
   do_fast_syscall_32+0xa6/0x1e0
   sysenter_past_esp+0x45/0x74

  Mem-Info:
  active_anon:104698 inactive_anon:105791 isolated_anon:192
   active_file:433 inactive_file:283 isolated_file:22
   unevictable:0 dirty:0 writeback:296 unstable:0
   slab_reclaimable:6389 slab_unreclaimable:78927
   mapped:474 shmem:0 pagetables:101426 bounce:0
   free:10518 free_pcp:334 free_cma:0
  Node 0 active_anon:418792kB inactive_anon:423164kB active_file:1732kB inactive_file:1132kB unevictable:0kB isolated(anon):768kB isolated(file):88kB mapped:1896kB dirty:0kB writeback:1184kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1478632 all_unreclaimable? yes
  DMA free:3304kB min:68kB low:84kB high:100kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:4088kB kernel_stack:0kB pagetables:2480kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
  lowmem_reserve[]: 0 809 1965 1965
  Normal free:3436kB min:3604kB low:4504kB high:5404kB present:897016kB managed:858460kB mlocked:0kB slab_reclaimable:25556kB slab_unreclaimable:311712kB kernel_stack:164608kB pagetables:30844kB bounce:0kB free_pcp:620kB local_pcp:104kB free_cma:0kB
  lowmem_reserve[]: 0 0 9247 9247
  HighMem free:33808kB min:512kB low:1796kB high:3080kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:372252kB bounce:0kB free_pcp:428kB local_pcp:72kB free_cma:0kB
  lowmem_reserve[]: 0 0 0 0
  DMA: 2*4kB (UM) 2*8kB (UM) 0*16kB 1*32kB (U) 1*64kB (U) 2*128kB (UM) 1*256kB (U) 1*512kB (M) 0*1024kB 1*2048kB (U) 0*4096kB = 3192kB
  Normal: 33*4kB (MH) 79*8kB (ME) 11*16kB (M) 4*32kB (M) 2*64kB (ME) 2*128kB (EH) 7*256kB (EH) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3244kB
  HighMem: 2590*4kB (UM) 1568*8kB (UM) 491*16kB (UM) 60*32kB (UM) 6*64kB (M) 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 33064kB
  Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
  25121 total pagecache pages
  24160 pages in swap cache
  Swap cache stats: add 86371, delete 62211, find 42865/60187
  Free swap  = 4015560kB
  Total swap = 4192252kB
  524186 pages RAM
  295934 pages HighMem/MovableOnly
  9658 pages reserved
  0 pages cma reserved

The order-0 allocation for normal zone failed while there are a lot of
reclaimable memory(i.e., anonymous memory with free swap).  I wanted to
analyze the problem but it was hard because we removed per-zone lru stat
so I couldn't know how many of anonymous memory there are in normal/dma
zone.

When we investigate OOM problem, reclaimable memory count is crucial
stat to find a problem.  Without it, it's hard to parse the OOM message
so I believe we should keep it.

With per-zone lru stat,

  gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0
  Mem-Info:
  active_anon:101103 inactive_anon:102219 isolated_anon:0
   active_file:503 inactive_file:544 isolated_file:0
   unevictable:0 dirty:0 writeback:34 unstable:0
   slab_reclaimable:6298 slab_unreclaimable:74669
   mapped:863 shmem:0 pagetables:100998 bounce:0
   free:23573 free_pcp:1861 free_cma:0
  Node 0 active_anon:404412kB inactive_anon:409040kB active_file:2012kB inactive_file:2176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:3452kB dirty:0kB writeback:136kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1320845 all_unreclaimable? yes
  DMA free:3296kB min:68kB low:84kB high:100kB active_anon:5540kB inactive_anon:0kB active_file:0kB inactive_file:0kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:248kB slab_unreclaimable:2628kB kernel_stack:792kB pagetables:2316kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
  lowmem_reserve[]: 0 809 1965 1965
  Normal free:3600kB min:3604kB low:4504kB high:5404kB active_anon:86304kB inactive_anon:0kB active_file:160kB inactive_file:376kB present:897016kB managed:858524kB mlocked:0kB slab_reclaimable:24944kB slab_unreclaimable:296048kB kernel_stack:163832kB pagetables:35892kB bounce:0kB free_pcp:3076kB local_pcp:656kB free_cma:0kB
  lowmem_reserve[]: 0 0 9247 9247
  HighMem free:86156kB min:512kB low:1796kB high:3080kB active_anon:312852kB inactive_anon:410024kB active_file:1924kB inactive_file:2012kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:365784kB bounce:0kB free_pcp:3868kB local_pcp:720kB free_cma:0kB
  lowmem_reserve[]: 0 0 0 0
  DMA: 8*4kB (UM) 8*8kB (UM) 4*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (M) 3*256kB (UME) 2*512kB (UE) 1*1024kB (E) 0*2048kB 0*4096kB = 3296kB
  Normal: 240*4kB (UME) 160*8kB (UME) 23*16kB (ME) 3*32kB (UE) 3*64kB (UME) 2*128kB (ME) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3408kB
  HighMem: 10942*4kB (UM) 3102*8kB (UM) 866*16kB (UM) 76*32kB (UM) 11*64kB (UM) 4*128kB (UM) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 86344kB
  Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
  54409 total pagecache pages
  53215 pages in swap cache
  Swap cache stats: add 300982, delete 247765, find 157978/226539
  Free swap  = 3803244kB
  Total swap = 4192252kB
  524186 pages RAM
  295934 pages HighMem/MovableOnly
  9642 pages reserved
  0 pages cma reserved

With that, we can see normal zone has a 86M reclaimable memory so we can
know something goes wrong(I will fix the problem in next patch) in
reclaim.

[mgorman@techsingularity.net: rename zone LRU stats in /proc/vmstat]
 Link: http://lkml.kernel.org/r/20160725072300.GK10438@techsingularity.net
Link: http://lkml.kernel.org/r/1469110261-7365-2-git-send-email-mgorman@techsingularity.net
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Mel Gorman
bca6759258 mm, vmstat: remove zone and node double accounting by approximating retries
The number of LRU pages, dirty pages and writeback pages must be
accounted for on both zones and nodes because of the reclaim retry
logic, compaction retry logic and highmem calculations all depending on
per-zone stats.

Many lowmem allocations are immune from OOM kill due to a check in
__alloc_pages_may_oom for (ac->high_zoneidx < ZONE_NORMAL) since commit
03668b3ceb ("oom: avoid oom killer for lowmem allocations").  The
exception is costly high-order allocations or allocations that cannot
fail.  If the __alloc_pages_may_oom avoids OOM-kill for low-order lowmem
allocations then it would fall through to __alloc_pages_direct_compact.

This patch will blindly retry reclaim for zone-constrained allocations
in should_reclaim_retry up to MAX_RECLAIM_RETRIES.  This is not ideal
but without per-zone stats there are not many alternatives.  The impact
it that zone-constrained allocations may delay before considering the
OOM killer.

As there is no guarantee enough memory can ever be freed to satisfy
compaction, this patch avoids retrying compaction for zone-contrained
allocations.

In combination, that means that the per-node stats can be used when
deciding whether to continue reclaim using a rough approximation.  While
it is possible this will make the wrong decision on occasion, it will
not infinite loop as the number of reclaim attempts is capped by
MAX_RECLAIM_RETRIES.

The final step is calculating the number of dirtyable highmem pages.  As
those calculations only care about the global count of file pages in
highmem.  This patch uses a global counter used instead of per-zone
stats as it is sufficient.

In combination, this allows the per-zone LRU and dirty state counters to
be removed.

[mgorman@techsingularity.net: fix acct_highmem_file_pages()]
  Link: http://lkml.kernel.org/r/1468853426-12858-4-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-35-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Suggested by: Michal Hocko <mhocko@kernel.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Mel Gorman
e2ecc8a79e mm, vmstat: print node-based stats in zoneinfo file
There are a number of stats that were previously accessible via zoneinfo
that are now invisible.  While it is possible to create a new file for
the node stats, this may be missed by users.  Instead this patch prints
the stats under the first populated zone in /proc/zoneinfo.

Link: http://lkml.kernel.org/r/1467970510-21195-34-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Mel Gorman
7cc30fcfd2 mm: vmstat: account per-zone stalls and pages skipped during reclaim
The vmstat allocstall was fairly useful in the general sense but
node-based LRUs change that.  It's important to know if a stall was for
an address-limited allocation request as this will require skipping
pages from other zones.  This patch adds pgstall_* counters to replace
allocstall.  The sum of the counters will equal the old allocstall so it
can be trivially recalculated.  A high number of address-limited
allocation requests may result in a lot of useless LRU scanning for
suitable pages.

As address-limited allocations require pages to be skipped, it's
important to know how much useless LRU scanning took place so this patch
adds pgskip* counters.  This yields the following model

1. The number of address-space limited stalls can be accounted for (pgstall)
2. The amount of useless work required to reclaim the data is accounted (pgskip)
3. The total number of scans is available from pgscan_kswapd and pgscan_direct
   so from that the ratio of useful to useless scans can be calculated.

[mgorman@techsingularity.net: s/pgstall/allocstall/]
  Link: http://lkml.kernel.org/r/1468404004-5085-3-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-33-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Mel Gorman
e6cbd7f2ef mm, page_alloc: remove fair zone allocation policy
The fair zone allocation policy interleaves allocation requests between
zones to avoid an age inversion problem whereby new pages are reclaimed
to balance a zone.  Reclaim is now node-based so this should no longer
be an issue and the fair zone allocation policy is not free.  This patch
removes it.

Link: http://lkml.kernel.org/r/1467970510-21195-30-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Mel Gorman
c4a25635b6 mm: move vmscan writes and file write accounting to the node
As reclaim is now node-based, it follows that page write activity due to
page reclaim should also be accounted for on the node.  For consistency,
also account page writes and page dirtying on a per-node basis.

After this patch, there are a few remaining zone counters that may appear
strange but are fine.  NUMA stats are still per-zone as this is a
user-space interface that tools consume.  NR_MLOCK, NR_SLAB_*,
NR_PAGETABLE, NR_KERNEL_STACK and NR_BOUNCE are all allocations that
potentially pin low memory and cannot trivially be reclaimed on demand.
This information is still useful for debugging a page allocation failure
warning.

Link: http://lkml.kernel.org/r/1467970510-21195-21-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Mel Gorman
11fb998986 mm: move most file-based accounting to the node
There are now a number of accounting oddities such as mapped file pages
being accounted for on the node while the total number of file pages are
accounted on the zone.  This can be coped with to some extent but it's
confusing so this patch moves the relevant file-based accounted.  Due to
throttling logic in the page allocator for reliable OOM detection, it is
still necessary to track dirty and writeback pages on a per-zone basis.

[mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting]
  Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net
Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Mel Gorman
50658e2e04 mm: move page mapped accounting to the node
Reclaim makes decisions based on the number of pages that are mapped but
it's mixing node and zone information.  Account NR_FILE_MAPPED and
NR_ANON_PAGES pages on the node.

Link: http://lkml.kernel.org/r/1467970510-21195-18-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Mel Gorman
1e6b10857f mm, workingset: make working set detection node-aware
Working set and refault detection is still zone-based, fix it.

Link: http://lkml.kernel.org/r/1467970510-21195-16-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00