Fix some serious WTF in the reference count scrubber's rmap fragment
processing. The code comment says that this loop is supposed to move
all fragment records starting at or before bno onto the worklist, but
there's no obvious reason why nr (the number of items added) should
increment starting from 1, and breaking the loop when we've added the
target number seems dubious since we could have more rmap fragments that
should have been added to the worklist.
This seems to manifest in xfs/411 when adding one to the refcount field.
Fixes: dbde19da96 ("xfs: cross-reference the rmapbt data with the refcountbt")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Keys for extent interval records in the reverse mapping btree are
supposed to be computed as follows:
(physical block, owner, fork, is_btree, is_unwritten, offset)
This provides users the ability to look up a reverse mapping from a bmbt
record -- start with the physical block; then if there are multiple
records for the same block, move on to the owner; then the inode fork
type; and so on to the file offset.
However, the key comparison functions incorrectly remove the
fork/btree/unwritten information that's encoded in the on-disk offset.
This means that lookup comparisons are only done with:
(physical block, owner, offset)
This means that queries can return incorrect results. On consistent
filesystems this hasn't been an issue because blocks are never shared
between forks or with bmbt blocks; and are never unwritten. However,
this bug means that online repair cannot always detect corruption in the
key information in internal rmapbt nodes.
Found by fuzzing keys[1].attrfork = ones on xfs/371.
Fixes: 4b8ed67794 ("xfs: add rmap btree operations")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When the bmbt scrubber is looking up rmap extents, we need to set the
extent flags from the bmbt record fully. This will matter once we fix
the rmap btree comparison functions to check those flags correctly.
Fixes: d852657ccf ("xfs: cross-reference reverse-mapping btree")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pass the same oldext argument (which contains the existing rmapping's
unwritten state) to xfs_rmap_lookup_le_range at the start of
xfs_rmap_convert_shared. At this point in the code, flags is zero,
which means that we perform lookups using the wrong key.
Fixes: 3f165b334e ("xfs: convert unwritten status of reverse mappings for shared files")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=3FTR
-----END PGP SIGNATURE-----
Merge tag 'for-5.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A handful of minor fixes and updates:
- handle missing device replace item on mount (syzbot report)
- fix space reservation calculation when finishing relocation
- fix memory leak on error path in ref-verify (debugging feature)
- fix potential overflow during defrag on 32bit arches
- minor code update to silence smatch warning
- minor error message updates"
* tag 'for-5.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix memory leak in btrfs_ref_tree_mod
btrfs: dev-replace: fail mount if we don't have replace item with target device
btrfs: scrub: update message regarding read-only status
btrfs: clean up NULL checks in qgroup_unreserve_range()
btrfs: fix min reserved size calculation in merge_reloc_root
btrfs: print the block rsv type when we fail our reservation
btrfs: fix potential overflow in cluster_pages_for_defrag on 32bit arch
Fix a regression where a new WARN_ON() was reachable when using
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32 on ext4, causing xfstest generic/602
to sometimes fail on ext4.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCX6nKxBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3FwAQD9r8ROaizX2LEYhXYO2uUIcnPMdngD
FOtghnSohKSKAQEAv4fm04Gd67kCIbRh25zUfykRJoC8kpdl52k+zzqMvwA=
=1vim
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt fix from Eric Biggers:
"Fix a regression where a new WARN_ON() was reachable when using
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32 on ext4, causing xfstest
generic/602 to sometimes fail on ext4"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: remove reachable WARN in fscrypt_setup_iv_ino_lblk_32_key()
refactoring.
-----BEGIN PGP SIGNATURE-----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=bpPt
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.10-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"This is mainly server-to-server copy and fallout from Chuck's 5.10 rpc
refactoring"
* tag 'nfsd-5.10-1' of git://linux-nfs.org/~bfields/linux:
net/sunrpc: fix useless comparison in proc_do_xprt()
net/sunrpc: return 0 on attempt to write to "transports"
NFSD: fix missing refcount in nfsd4_copy by nfsd4_do_async_copy
NFSD: Fix use-after-free warning when doing inter-server copy
NFSD: MKNOD should return NFSERR_BADTYPE instead of NFSERR_INVAL
SUNRPC: Fix general protection fault in trace_rpc_xdr_overflow()
NFSD: NFSv3 PATHCONF Reply is improperly formed
few other miscellaneous bug fixes and a cleanup for the MAINTAINERS
file.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl+pfIoACgkQ8vlZVpUN
gaMGFAf9FP9DoKQp10zp98LphiPRzMAqt9/ghUWcpz1bkXy33+NHivEi1tOTFcrZ
hetvtOi/YnMlcD8f5IMf2vyOvj96ubI9fgsN3CIGNzU6kQm5E1s/h14PdQ2OkJbb
Kn/BpmaWcTZRj0OXt9CcnEqAYIGrRMaHgZLcDoMwOCr+WgUTJD9Sk7mMLDRBkh8u
QXnfRG2Ahsip8ZUdNTxB7fWPC8BkQAhkLnUe+9mMzIQEMDNs7kfPhnuN+ka334KV
62rc99lYvy3jWV34Iahd/pwS8VOYb0x4EHtcqD28bePy/WR9GU54bdbqMDV33bsx
D+gnQLfwgoW92+3/2TTXvpG4WPWeqQ==
=Y2bI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes and cleanups from Ted Ts'o:
"More fixes and cleanups for the new fast_commit features, but also a
few other miscellaneous bug fixes and a cleanup for the MAINTAINERS
file"
* tag 'ext4_for_linus_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (28 commits)
jbd2: fix up sparse warnings in checkpoint code
ext4: fix sparse warnings in fast_commit code
ext4: cleanup fast commit mount options
jbd2: don't start fast commit on aborted journal
ext4: make s_mount_flags modifications atomic
ext4: issue fsdev cache flush before starting fast commit
ext4: disable fast commit with data journalling
ext4: fix inode dirty check in case of fast commits
ext4: remove unnecessary fast commit calls from ext4_file_mmap
ext4: mark buf dirty before submitting fast commit buffer
ext4: fix code documentatioon
ext4: dedpulicate the code to wait on inode that's being committed
jbd2: don't read journal->j_commit_sequence without taking a lock
jbd2: don't touch buffer state until it is filled
jbd2: add todo for a fast commit performance optimization
jbd2: don't pass tid to jbd2_fc_end_commit_fallback()
jbd2: don't use state lock during commit path
jbd2: drop jbd2_fc_init documentation
ext4: clean up the JBD2 API that initializes fast commits
jbd2: rename j_maxlen to j_total_len and add jbd2_journal_max_txn_bufs
...
- fix setting up pcluster improperly for temporary pages;
- derive atime instead of leaving it empty.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCX6lG0xUcaHNpYW5na2Fv
QHJlZGhhdC5jb20ACgkQOTcx3B+15gRmjQEAspSscgSq13pb1s1z51dxrD7vljqP
gmQ66XB+YAOy6McBAJbvmn37K6Ku0YbeOAdBicIgYe9ykW9PMZagDodOeP8M
=Wnwh
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.10-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"A week ago, Vladimir reported an issue that the kernel log would
become polluted if the page allocation debug option is enabled. I also
found this when I cleaned up magical page->mapping and originally
planned to submit these all for 5.11 but it seems the impact can be
noticed so submit the fix in advance.
In addition, nl6720 also reported that atime is empty although EROFS
has the only one on-disk timestamp as a practical consideration for
now but it's better to derive it as what we did for the other
timestamps.
Summary:
- fix setting up pcluster improperly for temporary pages
- derive atime instead of leaving it empty"
* tag 'erofs-for-5.10-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix setting up pcluster for temporary pages
erofs: derive atime instead of leaving it empty
The victim inode's parent and name info is required when an event
needs to be delivered to a group interested in filename info OR
when the inode's parent is interested in an event on its children.
Let us call the first condition 'parent_needed' and the second
condition 'parent_interested'.
In fsnotify_parent(), the condition where the inode's parent is
interested in some events on its children, but not necessarily
interested the specific event is called 'parent_watched'.
fsnotify_parent() tests the condition (!parent_watched && !parent_needed)
for sending the event without parent and name info, which is correct.
It then wrongly assumes that parent_watched implies !parent_needed
and tests the condition (parent_watched && !parent_interested)
for sending the event without parent and name info, which is wrong,
because parent may still be needed by some group.
For example, after initializing a group with FAN_REPORT_DFID_NAME and
adding a FAN_MARK_MOUNT with FAN_OPEN mask, open events on non-directory
children of "testdir" are delivered with file name info.
After adding another mark to the same group on the parent "testdir"
with FAN_CLOSE|FAN_EVENT_ON_CHILD mask, open events on non-directory
children of "testdir" are no longer delivered with file name info.
Fix the logic and use auxiliary variables to clarify the conditions.
Fixes: 9b93f33105 ("fsnotify: send event with parent/name info to sb/mount/non-dir marks")
Cc: stable@vger.kernel.org#v5.9
Link: https://lore.kernel.org/r/20201108105906.8493-1-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
- Fix an uninitialized struct problem.
- Fix an iomap problem zeroing unwritten EOF blocks.
- Fix some clumsy error handling when writeback fails on
blocksize < pagesize filesystems.
- Fix a retry loop not resetting loop variables properly.
- Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel
actually does permit that combination.
- Fix excessive page cache flushing when unsharing part of a file.
-----BEGIN PGP SIGNATURE-----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=MqoT
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix an uninitialized struct problem
- Fix an iomap problem zeroing unwritten EOF blocks
- Fix some clumsy error handling when writeback fails on filesystems
with blocksize < pagesize
- Fix a retry loop not resetting loop variables properly
- Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel
actually does permit that combination
- Fix excessive page cache flushing when unsharing part of a file
* tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: only flush the unshared range in xfs_reflink_unshare
xfs: fix scrub flagging rtinherit even if there is no rt device
xfs: fix missing CoW blocks writeback conversion retry
iomap: clean up writeback state logic on writepage error
iomap: support partial page discard on writeback block mapping failure
xfs: flush new eof page on truncate to avoid post-eof corruption
xfs: set xefi_discard when creating a deferred agfl free log intent item
Merge procfs splice read fixes from Christoph Hellwig:
"Greg reported a problem due to the fact that Android tests use procfs
files to test splice, which stopped working with the changes for
set_fs() removal.
This series adds read_iter support for seq_file, and uses those for
various proc files using seq_file to restore splice read support"
[ Side note: Christoph initially had a scripted "move everything over"
patch, which looks fine, but I personally would prefer us to actively
discourage splice() on random files. So this does just the minimal
basic core set of proc file op conversions.
For completeness, and in case people care, that script was
sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g'
but I'll wait and see if somebody has a strong argument for using
splice on random small /proc files before I'd run it on the whole
kernel. - Linus ]
* emailed patches from Christoph Hellwig <hch@lst.de>:
proc "seq files": switch to ->read_iter
proc "single files": switch to ->read_iter
proc/stat: switch to ->read_iter
proc/cpuinfo: switch to ->read_iter
proc: wire up generic_file_splice_read for iter ops
seq_file: add seq_read_iter
-----BEGIN PGP SIGNATURE-----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=zplt
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A set of fixes for io_uring:
- SQPOLL cancelation fixes
- Two fixes for the io_identity COW
- Cancelation overflow fix (Pavel)
- Drain request cancelation fix (Pavel)
- Link timeout race fix (Pavel)"
* tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
io_uring: fix link lookup racing with link timeout
io_uring: use correct pointer for io_uring_show_cred()
io_uring: don't forget to task-cancel drained reqs
io_uring: fix overflowed cancel w/ linked ->files
io_uring: drop req/tctx io_identity separately
io_uring: ensure consistent view of original task ->mm from SQPOLL
io_uring: properly handle SQPOLL request cancelations
io-wq: cancel request if it's asking for files and we don't have them
Add missing __acquires() and __releases() annotations. Also, in an
"this should never happen" WARN_ON check, if it *does* actually
happen, we need to release j_state_lock since this function is always
supposed to release that lock. Otherwise, things will quickly grind
to a halt after the WARN_ON trips.
Fixes: 96f1e09745 ("jbd2: avoid long hold times of j_state_lock...")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add missing __acquire() and __releases() annotations, and make
fc_ineligible_reasons[] static, as it is not used outside of
fs/ext4/fast_commit.c.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Drop no_fc mount option that disable fast commit even if it was
enabled at mkfs time. Move fc_debug_force mount option under ifdef
EXT4_DEBUG to annotate that this is strictly for debugging and testing
purposes and should not be used in production.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-23-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commit file system states are recorded in
sbi->s_mount_flags. Fast commit expects these bit manipulations to be
atomic. This patch adds helpers to make those modifications atomic.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-21-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the journal dev is different from fsdev, issue a cache flush before
committing fast commit blocks to disk.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201106035911.1942128-20-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commits don't work with data journalling. This patch disables the
fast commit support when data journalling is turned on.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201106035911.1942128-19-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In case of fast commits, determine if the inode is dirty by checking
if the inode is on fast commit list. This also helps us get rid of
ext4_inode_info.i_fc_committed_subtid field.
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-18-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a TODO to remember fixing REQ_FUA | REQ_PREFLUSH for fast commit
buffers. Also, fix a typo in top level comment in fast_commit.c
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-15-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch removes the deduplicates the code that implements waiting
on inode that's being committed. That code is moved into a new
function.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-14-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commit buffers should be filled in before toucing their
state. Remove code that sets buffer state as dirty before the buffer
is passed to the file system.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-12-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commit performance can be optimized if commit thread doesn't wait
for ongoing fast commits to complete until the transaction enters
T_FLUSH state. Document this optimization.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-11-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In jbd2_fc_end_commit_fallback(), we know which tid to commit. There's
no need for caller to pass it.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-10-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Variables journal->j_fc_off, journal->j_fc_wbuf are accessed during
commit path. Since today we allow only one process to perform a fast
commit, there is no need take state lock before accessing these
variables. This patch removes these locks and adds comments to
describe this.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-9-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch removes jbd2_fc_init() API and its related functions to
simplify enabling fast commits. With this change, the number of fast
commit blocks to use is solely determined by the JBD2 layer. So, we
move the default value for minimum number of fast commit blocks from
ext4/fast_commit.h to include/linux/jbd2.h. However, whether or not to
use fast commits is determined by the file system. The file system
just sets the fast commit feature using
jbd2_journal_set_features(). JBD2 layer then determines how many
blocks to use for fast commits (based on the value found in the JBD2
superblock).
Note that the JBD2 feature flag of fast commits is just an indication
that there are fast commit blocks present on disk. It doesn't tell
JBD2 layer about the intent of the file system of whether to it wants
to use fast commit or not. That's why, we blindly clear the fast
commit flag in journal_reset() after the recovery is done.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-7-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The on-disk superblock field sb->s_maxlen represents the total size of
the journal including the fast commit area and is no more the max
number of blocks available for a transaction. The maximum number of
blocks available to a transaction is reduced by the number of fast
commit blocks. So, this patch renames j_maxlen to j_total_len to
better represent its intent. Also, it adds a function to calculate max
number of bufs available for a transaction.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Firstly, pass handle to all ext4_fc_track_* functions and use
transaction id found in handle->h_transaction->h_tid for tracking fast
commit updates. Secondly, don't pass inode to
ext4_fc_track_link/create/unlink functions. inode can be found inside
these functions as d_inode(dentry). However, rename path is an
exeception. That's because in that case, we need inode that's not same
as d_inode(dentry). To handle that, add a couple of low-level wrapper
functions that take inode and dentry as arguments.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_fc_track_range() should only be called when blocks are added or
removed from an inode. So, the only places from where we need to call
this function are ext4_map_blocks(), punch hole, collapse / zero
range, truncate. Remove all the other redundant calls to ths function.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-4-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If inode gets evicted due to memory pressure, we have to remove it
from the fast commit list. However, that inode may have uncommitted
changes that fast commits will lose. So, just fall back to full
commits in this case. Also, rename the fast commit ineligiblity reason
from "EXT4_FC_REASON_MEM" to "EXT4_FC_REASON_MEM_NOMEM" for better
expression.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commit feature has flags in the file system as well in JBD2. The
meaning of fast commit feature flags can get confusing. Update docs
and code to add more documentation about it.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201106035911.1942128-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It takes xattr_sem to check inline data again but without unlock it
in case not have. So unlock it before return.
Fixes: aef1c8513c ("ext4: let ext4_truncate handle inline data correctly")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604370542-124630-1-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Smatch complains that "i" can be uninitialized if we don't enter the
loop. I don't know if it's possible but we may as well silence this
warning.
[ Initialize i to sb->s_blocksize instead of 0. The only way the for
loop could be skipped entirely is the in-memory data structures, in
particular the bh->b_data for the on-disk superblock has gotten
corrupted enough that calculated value of group is >= to
ext4_get_groups_count(sb). In that case, we want to exit
immediately without allocating a block. -- TYT ]
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201030114620.GB3251003@mwanda
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The macro MOPT_Q is used to indicates the mount option is related to
quota stuff and is defined to be MOPT_NOSUPPORT when CONFIG_QUOTA is
disabled. Normally the quota options are handled explicitly, so it
didn't matter that the MOPT_STRING flag was missing, even though the
usrjquota and grpjquota mount options take a string argument. It's
important that's present in the !CONFIG_QUOTA case, since without
MOPT_STRING, the mount option matcher will match usrjquota= followed
by an integer, and will otherwise skip the table entry, and so "mount
option not supported" error message is never reported.
[ Fixed up the commit description to better explain why the fix
works. --TYT ]
Fixes: 26092bf524 ("ext4: use a table-driven handler for mount options")
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1603986396-28917-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
our REQUEST_CLOSE message. The code that handled this case was
inadvertently disabled in 5.9, this patch removes it entirely and
fixes the problem in a way that is consistent with ceph-fuse.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl+lookTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHziwFGB/43MBB+nG4wBHM58GybIi2NkS/TMmd5
5D3GPmchWYbE1d3hzAJmAYUUZCIx8kh0TeWjPZzR0iEok+f9Zf8bjrGDEFRWWOZc
OL+PMfZckhVS2W8dUkx9CsypnA9/Rx2i7y/XKDDiC3eumfkDMktTdSS4UNxZT5cg
ElmfozOPdv7fRGNPZJiQnkgWdMRFkqiGsdL+9wgRP4qc8WOkipoFouw+gJ2lN3vK
odcY3UGcmx4iuiBj0uXjiFy/MtdYuNLjJrtMmkkEBklxGgIP/1dTOMnV3ktMMYkT
gRUNM7fz/HeZIXb1N6jFs2S/ai1uuS6wP7aTHGfi8W2xgQA5ukDLIbu/
=Tbrl
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.10-rc3' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a potential stall on umount caused by the MDS dropping our
REQUEST_CLOSE message. The code that handled this case was
inadvertently disabled in 5.9, this patch removes it entirely and
fixes the problem in a way that is consistent with ceph-fuse"
* tag 'ceph-for-5.10-rc3' of git://github.com/ceph/ceph-client:
ceph: check session state after bumping session->s_seq
Implement ->read_iter for all proc "seq files" so that splice works on
them.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement ->read_iter for all proc "single files" so that more bionic
tests cases can pass when they call splice() on other fun files like
/proc/version
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement ->read_iter so that splice can be used on this file.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement ->read_iter so that the Android bionic test suite can use
this random proc file for its splice test case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wire up generic_file_splice_read for the iter based proxy ops, so
that splice reads from them work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
iov_iter based variant for reading a seq_file. seq_read is
reimplemented on top of the iter variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I_CREATING isn't actually set until the inode has been assigned an inode
number and inserted into the inode hash table. So the WARN_ON() in
fscrypt_setup_iv_ino_lblk_32_key() is wrong, and it can trigger when
creating an encrypted file on ext4. Remove it.
This was sometimes causing xfstest generic/602 to fail on ext4. I
didn't notice it before because due to a separate oversight, new inodes
that haven't been assigned an inode number yet don't necessarily have
i_ino == 0 as I had thought, so by chance I never saw the test fail.
Fixes: a992b20cd4 ("fscrypt: add fscrypt_prepare_new_inode() and fscrypt_set_context()")
Reported-by: Theodore Y. Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20201031004556.87862-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
We can't just go over linked requests because it may race with linked
timeouts. Take ctx->completion_lock in that case.
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Need to initialize nfsd4_copy's refcount to 1 to avoid use-after-free
warning when nfs4_put_copy is called from nfsd4_cb_offload_release.
Fixes: ce0887ac96 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The source file nfsd_file is not constructed the same as other
nfsd_file's via nfsd_file_alloc. nfsd_file_put should not be
called to free the object; nfsd_file_put is not the inverse of
kzalloc, instead kfree is called by nfsd4_do_async_copy when done.
Fixes: ce0887ac96 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A late paragraph of RFC 1813 Section 3.3.11 states:
| ... if the server does not support the target type or the
| target type is illegal, the error, NFS3ERR_BADTYPE, should
| be returned. Note that NF3REG, NF3DIR, and NF3LNK are
| illegal types for MKNOD.
The Linux NFS server incorrectly returns NFSERR_INVAL in these
cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit cc028a10a4 ("NFSD: Hoist status code encoding into XDR
encoder functions") missed a spot.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----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=8z2V
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"
* tag 'gfs2-v5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Wake up when sd_glock_disposal becomes zero
gfs2: Don't call cancel_delayed_work_sync from within delete work function
gfs2: check for live vs. read-only file system in gfs2_fitrim
gfs2: don't initialize statfs_change inodes in spectator mode
gfs2: Split up gfs2_meta_sync into inode and rgrp versions
gfs2: init_journal's undo directive should also undo the statfs inodes
gfs2: Add missing truncate_inode_pages_final for sd_aspace
gfs2: Free rd_bits later in gfs2_clear_rgrpd to fix use-after-free
Previous commit changed how we index the registered credentials, but
neglected to update one spot that is used when the personalities are
iterated through ->show_fdinfo(). Ensure we use the right struct type
for the iteration.
Reported-by: syzbot+a6d494688cdb797bdfce@syzkaller.appspotmail.com
Fixes: 1e6fa5216a ("io_uring: COW io_identity on mismatch")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If there is a long-standing request of one task locking up execution of
deferred requests, and the defer list contains requests of another task
(all files-less), then a potential execution of __io_uring_task_cancel()
by that another task will sleep until that first long-standing request
completion, and that may take long.
E.g.
tsk1: req1/read(empty_pipe) -> tsk2: req(DRAIN)
Then __io_uring_task_cancel(tsk2) waits for req1 completion.
It seems we even can manufacture a complicated case with many tasks
sharing many rings that can lock them forever.
Cancel deferred requests for __io_uring_task_cancel() as well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is one error handling path that does not free ref, which may cause
a minor memory leak.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace
item, then it means the filesystem is inconsistent state. This is either
corruption or a crafted image. Fail the mount as this needs a closer
look what is actually wrong.
As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace
item, in __btrfs_free_extra_devids() we determine that there is an
extra device, and free those extra devices but continue to mount the
device.
However, we were wrong in keeping tack of the rw_devices so the syzbot
testcase failed:
WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
panic+0x347/0x7c0 kernel/panic.c:231
__warn.cold+0x20/0x46 kernel/panic.c:600
report_bug+0x1bd/0x210 lib/bug.c:198
handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234
exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254
asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536
RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
RSP: 0018:ffffc900091777e0 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000
RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007
RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130
R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434
btrfs_fill_super fs/btrfs/super.c:1316 [inline]
btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672
The fix here is, when we determine that there isn't a replace item
then fail the mount if there is a replace target device (devid 0).
CC: stable@vger.kernel.org # 4.19+
Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Based on user feedback update the message printed when scrub fails to
start due to write requirements. To make a distinction add a device id
to the messages.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Smatch complains that this code dereferences "entry" before checking
whether it's NULL on the next line. Fortunately, rb_entry() will never
return NULL so it doesn't cause a problem. We can clean up the NULL
checking a bit to silence the warning and make the code more clear.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To help with debugging, print the type of the block rsv when we fail to
use our target block rsv in btrfs_use_block_rsv.
This now produces:
[ 544.672035] BTRFS: block rsv 1 returned -28
which is still cryptic without consulting the enum in block-rsv.h but I
guess it's better than nothing.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note from Nikolay ]
Signed-off-by: David Sterba <dsterba@suse.com>
On 32-bit systems, this shift will overflow for files larger than 4GB as
start_index is unsigned long while the calls to btrfs_delalloc_*_space
expect u64.
CC: stable@vger.kernel.org # 4.4+
Fixes: df480633b8 ("btrfs: extent-tree: Switch to new delalloc space reserve and release")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ define the variable instead of repeating the shift ]
Signed-off-by: David Sterba <dsterba@suse.com>
There's no reason to flush an entire file when we're unsharing part of
a file. Therefore, only initiate writeback on the selected range.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Some messages sent by the MDS entail a session sequence number
increment, and the MDS will drop certain types of requests on the floor
when the sequence numbers don't match.
In particular, a REQUEST_CLOSE message can cross with one of the
sequence morphing messages from the MDS which can cause the client to
stall, waiting for a response that will never come.
Originally, this meant an up to 5s delay before the recurring workqueue
job kicked in and resent the request, but a recent change made it so
that the client would never resend, causing a 60s stall unmounting and
sometimes a blockisting event.
Add a new helper for incrementing the session sequence and then testing
to see whether a REQUEST_CLOSE needs to be resent, and move the handling
of CEPH_MDS_SESSION_CLOSING into that function. Change all of the
bare sequence counter increments to use the new helper.
Reorganize check_session_state with a switch statement. It should no
longer be called when the session is CLOSING, so throw a warning if it
ever is (but still handle that case sanely).
[ idryomov: whitespace, pr_err() call fixup ]
URL: https://tracker.ceph.com/issues/47563
Fixes: fa99677342 ("ceph: fix potential mdsc use-after-free crash")
Reported-by: Patrick Donnelly <pdonnell@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Current io_match_files() check in io_cqring_overflow_flush() is useless
because requests drop ->files before going to the overflow list, however
linked to it request do not, and we don't check them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can't bundle this into one operation, as the identity may not have
originated from the tctx to begin with. Drop one ref for each of them
separately, if they don't match the static assignment. If we don't, then
if the identity is a lookup from registered credentials, we could be
freeing that identity as we're dropping a reference assuming it came from
the tctx. syzbot reports this as a use-after-free, as the identity is
still referencable from idr lookup:
==================================================================
BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
BUG: KASAN: use-after-free in atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline]
BUG: KASAN: use-after-free in __refcount_add include/linux/refcount.h:193 [inline]
BUG: KASAN: use-after-free in __refcount_inc include/linux/refcount.h:250 [inline]
BUG: KASAN: use-after-free in refcount_inc include/linux/refcount.h:267 [inline]
BUG: KASAN: use-after-free in io_init_req fs/io_uring.c:6700 [inline]
BUG: KASAN: use-after-free in io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774
Write of size 4 at addr ffff888011e08e48 by task syz-executor165/8487
CPU: 1 PID: 8487 Comm: syz-executor165 Not tainted 5.10.0-rc1-next-20201102-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x13d/0x180 mm/kasan/generic.c:192
instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline]
__refcount_add include/linux/refcount.h:193 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
io_init_req fs/io_uring.c:6700 [inline]
io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774
__do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x440e19
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 0f fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff644ff178 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000440e19
RDX: 0000000000000000 RSI: 000000000000450c RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000022b4850
R13: 0000000000000010 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 8487:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:461
kmalloc include/linux/slab.h:552 [inline]
io_register_personality fs/io_uring.c:9638 [inline]
__io_uring_register fs/io_uring.c:9874 [inline]
__do_sys_io_uring_register+0x10f0/0x40a0 fs/io_uring.c:9924
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 8487:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0x102/0x140 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1577
slab_free mm/slub.c:3140 [inline]
kfree+0xdb/0x360 mm/slub.c:4122
io_identity_cow fs/io_uring.c:1380 [inline]
io_prep_async_work+0x903/0xbc0 fs/io_uring.c:1492
io_prep_async_link fs/io_uring.c:1505 [inline]
io_req_defer fs/io_uring.c:5999 [inline]
io_queue_sqe+0x212/0xed0 fs/io_uring.c:6448
io_submit_sqe fs/io_uring.c:6542 [inline]
io_submit_sqes+0x14f6/0x25f0 fs/io_uring.c:6784
__do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff888011e08e00
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 72 bytes inside of
96-byte region [ffff888011e08e00, ffff888011e08e60)
The buggy address belongs to the page:
page:00000000a7104751 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e08
flags: 0xfff00000000200(slab)
raw: 00fff00000000200 ffffea00004f8540 0000001f00000002 ffff888010041780
raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888011e08d00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888011e08d80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
> ffff888011e08e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888011e08e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888011e08f00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
==================================================================
Reported-by: syzbot+625ce3bb7835b63f7f3d@syzkaller.appspotmail.com
Fixes: 1e6fa5216a ("io_uring: COW io_identity on mismatch")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure we get a valid view of the task mm, by using task_lock() when
attempting to grab the original task mm.
Reported-by: syzbot+b57abf7ee60829090495@syzkaller.appspotmail.com
Fixes: 2aede0e417 ("io_uring: stash ctx task reference for SQPOLL")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Track if a given task io_uring context contains SQPOLL instances, so we
can iterate those for cancelation (and request counts). This ensures that
we properly wait on SQPOLL contexts, and find everything that needs
canceling.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This can't currently happen, but will be possible shortly. Handle missing
files just like we do not being able to grab a needed mm, and mark the
request as needing cancelation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kernel has always allowed directories to have the rtinherit flag
set, even if there is no rt device, so this check is wrong.
Fixes: 80e4e12688 ("xfs: scrub inodes")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit 7588cbeec6, we tried to fix a race stemming from the lack of
coordination between higher level code that wants to allocate and remap
CoW fork extents into the data fork. Christoph cites as examples the
always_cow mode, and a directio write completion racing with writeback.
According to the comments before the goto retry, we want to restart the
lookup to catch the extent in the data fork, but we don't actually reset
whichfork or cow_fsb, which means the second try executes using stale
information. Up until now I think we've gotten lucky that either
there's something left in the CoW fork to cause cow_fsb to be reset, or
either data/cow fork sequence numbers have advanced enough to force a
fresh lookup from the data fork. However, if we reach the retry with an
empty stable CoW fork and a stable data fork, neither of those things
happens. The retry foolishly re-calls xfs_convert_blocks on the CoW
fork which fails again. This time, we toss the write.
I've recently been working on extending reflink to the realtime device.
When the realtime extent size is larger than a single block, we have to
force the page cache to CoW the entire rt extent if a write (or
fallocate) are not aligned with the rt extent size. The strategy I've
chosen to deal with this is derived from Dave's blocksize > pagesize
series: dirtying around the write range, and ensuring that writeback
always starts mapping on an rt extent boundary. This has brought this
race front and center, since generic/522 blows up immediately.
However, I'm pretty sure this is a bug outright, independent of that.
Fixes: 7588cbeec6 ("xfs: retry COW fork delalloc conversion when no extent was found")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The iomap writepage error handling logic is a mash of old and
slightly broken XFS writepage logic. When keepwrite writeback state
tracking was introduced in XFS in commit 0d085a529b ("xfs: ensure
WB_SYNC_ALL writeback handles partial pages correctly"), XFS had an
additional cluster writeback context that scanned ahead of
->writepage() to process dirty pages over the current ->writepage()
extent mapping. This context expected a dirty page and required
retention of the TOWRITE tag on partial page processing so the
higher level writeback context would revisit the page (in contrast
to ->writepage(), which passes a page with the dirty bit already
cleared).
The cluster writeback mechanism was eventually removed and some of
the error handling logic folded into the primary writeback path in
commit 150d5be09c ("xfs: remove xfs_cancel_ioend"). This patch
accidentally conflated the two contexts by using the keepwrite logic
in ->writepage() without accounting for the fact that the page is
not dirty. Further, the keepwrite logic has no practical effect on
the core ->writepage() caller (write_cache_pages()) because it never
revisits a page in the current function invocation.
Technically, the page should be redirtied for the keepwrite logic to
have any effect. Otherwise, write_cache_pages() may find the tagged
page but will skip it since it is clean. Even if the page was
redirtied, however, there is still no practical effect to keepwrite
since write_cache_pages() does not wrap around within a single
invocation of the function. Therefore, the dirty page would simply
end up retagged on the next writeback sequence over the associated
range.
All that being said, none of this really matters because redirtying
a partially processed page introduces a potential infinite redirty
-> writeback failure loop that deviates from the current design
principle of clearing the dirty state on writepage failure to avoid
building up too much dirty, unreclaimable memory on the system.
Therefore, drop the spurious keepwrite usage and dirty state
clearing logic from iomap_writepage_map(), treat the partially
processed page the same as a fully processed page, and let the
imminent ioend failure clean up the writeback state.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
iomap writeback mapping failure only calls into ->discard_page() if
the current page has not been added to the ioend. Accordingly, the
XFS callback assumes a full page discard and invalidation. This is
problematic for sub-page block size filesystems where some portion
of a page might have been mapped successfully before a failure to
map a delalloc block occurs. ->discard_page() is not called in that
error scenario and the bio is explicitly failed by iomap via the
error return from ->prepare_ioend(). As a result, the filesystem
leaks delalloc blocks and corrupts the filesystem block counters.
Since XFS is the only user of ->discard_page(), tweak the semantics
to invoke the callback unconditionally on mapping errors and provide
the file offset that failed to map. Update xfs_discard_page() to
discard the corresponding portion of the file and pass the range
along to iomap_invalidatepage(). The latter already properly handles
both full and sub-page scenarios by not changing any iomap or page
state on sub-page invalidations.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It is possible to expose non-zeroed post-EOF data in XFS if the new
EOF page is dirty, backed by an unwritten block and the truncate
happens to race with writeback. iomap_truncate_page() will not zero
the post-EOF portion of the page if the underlying block is
unwritten. The subsequent call to truncate_setsize() will, but
doesn't dirty the page. Therefore, if writeback happens to complete
after iomap_truncate_page() (so it still sees the unwritten block)
but before truncate_setsize(), the cached page becomes inconsistent
with the on-disk block. A mapped read after the associated page is
reclaimed or invalidated exposes non-zero post-EOF data.
For example, consider the following sequence when run on a kernel
modified to explicitly flush the new EOF page within the race
window:
$ xfs_io -fc "falloc 0 4k" -c fsync /mnt/file
$ xfs_io -c "pwrite 0 4k" -c "truncate 1k" /mnt/file
...
$ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file
00000400: 00 00 00 00 00 00 00 00 ........
$ umount /mnt/; mount <dev> /mnt/
$ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file
00000400: cd cd cd cd cd cd cd cd ........
Update xfs_setattr_size() to explicitly flush the new EOF page prior
to the page truncate to ensure iomap has the latest state of the
underlying block.
Fixes: 68a9f5e700 ("xfs: implement iomap based buffered write path")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
pcluster should be only set up for all managed pages instead of
temporary pages. Since it currently uses page->mapping to identify,
the impact is minor for now.
[ Update: Vladimir reported the kernel log becomes polluted
because PAGE_FLAGS_CHECK_AT_FREE flag(s) set if the page
allocation debug option is enabled. ]
Link: https://lore.kernel.org/r/20201022145724.27284-1-hsiangkao@aol.com
Fixes: 5ddcee1f3a ("erofs: get rid of __stagingpage_alloc helper")
Cc: <stable@vger.kernel.org> # 5.5+
Tested-by: Vladimir Zapolskiy <vladimir@tuxera.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
EROFS has _only one_ ondisk timestamp (ctime is currently
documented and recorded, we might also record mtime instead
with a new compat feature if needed) for each extended inode
since EROFS isn't mainly for archival purposes so no need to
keep all timestamps on disk especially for Android scenarios
due to security concerns. Also, romfs/cramfs don't have their
own on-disk timestamp, and squashfs only records mtime instead.
Let's also derive access time from ondisk timestamp rather than
leaving it empty, and if mtime/atime for each file are really
needed for specific scenarios as well, we can also use xattrs
to record them then.
Link: https://lore.kernel.org/r/20201031195102.21221-1-hsiangkao@aol.com
[ Gao Xiang: It'd be better to backport for user-friendly concern. ]
Fixes: 431339ba90 ("staging: erofs: add inode operations")
Cc: stable <stable@vger.kernel.org> # 4.19+
Reported-by: nl6720 <nl6720@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
The cleanup for the yfs_store_opaque_acl2_operation calls the wrong
function to destroy the ACL content buffer. It's an afs_acl struct, not
a yfs_acl struct - and the free function for latter may pass invalid
pointers to kfree().
Fix this by using the afs_acl_put() function. The yfs_acl_put()
function is then no longer used and can be removed.
general protection fault, probably for non-canonical address 0x7ebde00000000: 0000 [#1] SMP PTI
...
RIP: 0010:compound_head+0x0/0x11
...
Call Trace:
virt_to_cache+0x8/0x51
kfree+0x5d/0x79
yfs_free_opaque_acl+0x16/0x29
afs_put_operation+0x60/0x114
__vfs_setxattr+0x67/0x72
__vfs_setxattr_noperm+0x66/0xe9
vfs_setxattr+0x67/0xce
setxattr+0x14e/0x184
__do_sys_fsetxattr+0x66/0x8f
do_syscall_64+0x2d/0x3a
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When using the afs.yfs.acl xattr to change an AuriStor ACL, a warning
can be generated when the request is marshalled because the buffer
pointer isn't increased after adding the last element, thereby
triggering the check at the end if the ACL wasn't empty. This just
causes something like the following warning, but doesn't stop the call
from happening successfully:
kAFS: YFS.StoreOpaqueACL2: Request buffer underflow (36<108)
Fix this simply by increasing the count prior to the check.
Fixes: f5e4546347 ("afs: Implement YFS ACL setting")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit fc0e38dae6 ("GFS2: Fix glock deallocation race") fixed a
sd_glock_disposal accounting bug by adding a missing atomic_dec
statement, but it failed to wake up sd_glock_wait when that decrement
causes sd_glock_disposal to reach zero. As a consequence,
gfs2_gl_hash_clear can now run into a 10-minute timeout instead of
being woken up. Add the missing wakeup.
Fixes: fc0e38dae6 ("GFS2: Fix glock deallocation race")
Cc: stable@vger.kernel.org # v2.6.39+
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Right now, we can end up calling cancel_delayed_work_sync from within
delete_work_func via gfs2_lookup_by_inum -> gfs2_inode_lookup ->
gfs2_cancel_delete_work. When that happens, it will result in a
deadlock. Instead, gfs2_inode_lookup should skip the call to
gfs2_cancel_delete_work when called from delete_work_func (blktype ==
GFS2_BLKST_UNLINKED).
Reported-by: Alexander Ahring Oder Aring <aahringo@redhat.com>
Fixes: a0e3cc65fa ("gfs2: Turn gl_delete into a delayed work")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
For oom_score_adj values in the range [942,999], the current
calculations will print 16 for oom_adj. This patch simply limits the
output so output is inline with docs.
Signed-off-by: Charles Haithcock <chaithco@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://lkml.kernel.org/r/20201020165130.33927-1-chaithco@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the nfsroot default mount option to ask for NFSv2 only *if* the
kernel was built with NFSv2 support.
If not, default to NFSv3 or as last choice to NFSv4, depending on actual
kernel config.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Here is one tiny debugfs change to fix up an API where the last user was
successfully fixed up in 5.10-rc1 (so it couldn't be merged earlier),
and a much larger Documentation/ABI/ update to the files so they can be
automatically parsed by our tools.
The Documentation/ABI/ updates are just formatting issues, small ones to
bring the files into parsable format, and have been acked by numerous
subsystem maintainers and the documentation maintainer. I figured it
was good to get this into 5.10-rc2 to help with the merge issues that
would arise if these were to stick in linux-next until 5.11-rc1.
The debugfs change has been in linux-next for a long time, and the
Documentation updates only for the last linux-next release.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX56tfw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymeqgCgsmC4/XsduB8cb8QFd18W5BP9M1wAnR7u4B3o
HPghJvsslYGYSn1mpQl4
=UJ0M
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and documentation fixes from Greg KH:
"Here is one tiny debugfs change to fix up an API where the last user
was successfully fixed up in 5.10-rc1 (so it couldn't be merged
earlier), and a much larger Documentation/ABI/ update to the files so
they can be automatically parsed by our tools.
The Documentation/ABI/ updates are just formatting issues, small ones
to bring the files into parsable format, and have been acked by
numerous subsystem maintainers and the documentation maintainer. I
figured it was good to get this into 5.10-rc2 to help wih the merge
issues that would arise if these were to stick in linux-next until
5.11-rc1.
The debugfs change has been in linux-next for a long time, and the
Documentation updates only for the last linux-next release"
* tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (40 commits)
scripts: get_abi.pl: assume ReST format by default
docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication
docs: ABI: sysfs-class-backlight: unify ABI documentation
docs: ABI: sysfs-c2port: remove a duplicated entry
docs: ABI: sysfs-class-power: unify duplicated properties
docs: ABI: unify /sys/class/leds/<led>/brightness documentation
docs: ABI: stable: remove a duplicated documentation
docs: ABI: change read/write attributes
docs: ABI: cleanup several ABI documents
docs: ABI: sysfs-bus-nvdimm: use the right format for ABI
docs: ABI: vdso: use the right format for ABI
docs: ABI: fix syntax to be parsed using ReST notation
docs: ABI: convert testing/configfs-acpi to ReST
docs: Kconfig/Makefile: add a check for broken ABI files
docs: abi-testing.rst: enable --rst-sources when building docs
docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
docs: ABI: create a 2-depth index for ABI
docs: ABI: make it parse ABI/stable as ReST-compatible files
docs: ABI: sysfs-uevent: make it compatible with ReST output
docs: ABI: testing: make the files compatible with ReST output
...
Hi Linus,
Please, pull the following patches that replace zero-length arrays with
flexible-array members.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=vyu3
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull more flexible-array member conversions from Gustavo A. R. Silva:
"Replace zero-length arrays with flexible-array members"
* tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
printk: ringbuffer: Replace zero-length array with flexible-array member
net/smc: Replace zero-length array with flexible-array member
net/mlx5: Replace zero-length array with flexible-array member
mei: hw: Replace zero-length array with flexible-array member
gve: Replace zero-length array with flexible-array member
Bluetooth: btintel: Replace zero-length array with flexible-array member
scsi: target: tcmu: Replace zero-length array with flexible-array member
ima: Replace zero-length array with flexible-array member
enetc: Replace zero-length array with flexible-array member
fs: Replace zero-length array with flexible-array member
Bluetooth: Replace zero-length array with flexible-array member
params: Replace zero-length array with flexible-array member
tracepoint: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member
mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member
dmaengine: ti-cppi5: Replace zero-length array with flexible-array member
-----BEGIN PGP SIGNATURE-----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=xYFz
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-10-30' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fixes for linked timeouts (Pavel)
- Set IO_WQ_WORK_CONCURRENT early for async offload (Pavel)
- Two minor simplifications that make the code easier to read and
follow (Pavel)
* tag 'io_uring-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
io_uring: use type appropriate io_kiocb handler for double poll
io_uring: simplify __io_queue_sqe()
io_uring: simplify nxt propagation in io_queue_sqe
io_uring: don't miss setting IO_WQ_WORK_CONCURRENT
io_uring: don't defer put of cancelled ltimeout
io_uring: always clear LINK_TIMEOUT after cancel
io_uring: don't adjust LINK_HEAD in cancel ltimeout
io_uring: remove opcode check on ltimeout kill
-----BEGIN PGP SIGNATURE-----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=bR/o
-----END PGP SIGNATURE-----
Merge tag 'for-5.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- lockdep fixes:
- drop path locks before manipulating sysfs objects or qgroups
- preliminary fixes before tree locks get switched to rwsem
- use annotated seqlock
- build warning fixes (printk format)
- fix relocation vs fallocate race
- tree checker properly validates number of stripes and parity
- readahead vs device replace fixes
- iomap dio fix for unnecessary buffered io fallback
* tag 'for-5.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: convert data_seqcount to seqcount_mutex_t
btrfs: don't fallback to buffered read if we don't need to
btrfs: add a helper to read the tree_root commit root for backref lookup
btrfs: drop the path before adding qgroup items when enabling qgroups
btrfs: fix readahead hang and use-after-free after removing a device
btrfs: fix use-after-free on readahead extent after failure to create it
btrfs: tree-checker: validate number of chunk stripes and parity
btrfs: tree-checker: fix incorrect printk format
btrfs: drop the path before adding block group sysfs files
btrfs: fix relocation failure due to race with fallocate
Before this patch, gfs2_fitrim was not properly checking for a "live" file
system. If the file system had something to trim and the file system
was read-only (or spectator) it would start the trim, but when it starts
the transaction, gfs2_trans_begin returns -EROFS (read-only file system)
and it errors out. However, if the file system was already trimmed so
there's no work to do, it never called gfs2_trans_begin. That code is
bypassed so it never returns the error. Instead, it returns a good
return code with 0 work. All this makes for inconsistent behavior:
The same fstrim command can return -EROFS in one case and 0 in another.
This tripped up xfstests generic/537 which reports the error as:
+fstrim with unrecovered metadata just ate your filesystem
This patch adds a check for a "live" (iow, active journal, iow, RW)
file system, and if not, returns the error properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before commit 97fd734ba1, the local statfs_changeX inode was never
initialized for spectator mounts. However, it still checks for
spectator mounts when unmounting everything. There's no good reason to
lookup the statfs_changeX files because spectators cannot perform recovery.
It still, however, needs the master statfs file for statfs calls.
This patch adds the check for spectator mounts to init_statfs.
Fixes: 97fd734ba1 ("gfs2: lookup local statfs inodes prior to journal recovery")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_meta_sync called filemap_fdatawrite to write
the address space for the metadata being synced. That's great for inodes, but
resource groups all point to the same superblock-address space, sdp->sd_aspace.
Each rgrp has its own range of blocks on which it should operate. That meant
every time an rgrp's metadata was synced, it would write all of them instead
of just the range.
This patch eliminates function gfs2_meta_sync and tailors specific metasync
functions for inodes and rgrps.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Hi,
Before this patch, function init_journal's "undo" directive jumped to label
fail_jinode_gh. But now that it does statfs initialization, it needs to
jump to fail_statfs instead. Failure to do so means that mount failures
after init_journal is successful will neglect to let go of the proper
statfs information, stranding the statfs_changeX inodes. This makes it
impossible to free its glocks, and results in:
gfs2: fsid=sda.s: G: s:EX n:2/805f f:Dqob t:EX d:UN/603701000 a:0 v:0 r:4 m:200 p:1
gfs2: fsid=sda.s: H: s:EX f:H e:0 p:1397947 [(ended)] init_journal+0x548/0x890 [gfs2]
gfs2: fsid=sda.s: I: n:6/32863 t:8 f:0x00 d:0x00000201 s:24 p:0
gfs2: fsid=sda.s: G: s:SH n:5/805f f:Dqob t:SH d:UN/603712000 a:0 v:0 r:3 m:200 p:0
gfs2: fsid=sda.s: H: s:SH f:EH e:0 p:1397947 [(ended)] gfs2_inode_lookup+0x1fb/0x410 [gfs2]
VFS: Busy inodes after unmount of sda. Self-destruct in 5 seconds. Have a nice day...
The next time the file system is mounted, it then reuses the same glocks,
which ends in a kernel NULL pointer dereference when trying to dump the
reused glock.
This patch makes the "undo" function of init_journal jump to fail_statfs
so the statfs files are properly deconstructed upon failure.
Fixes: 97fd734ba1 ("gfs2: lookup local statfs inodes prior to journal recovery")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Gfs2 creates an address space for its rgrps called sd_aspace, but it never
called truncate_inode_pages_final on it. This confused vfs greatly which
tried to reference the address space after gfs2 had freed the superblock
that contained it.
This patch adds a call to truncate_inode_pages_final for sd_aspace, thus
avoiding the use-after-free.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_clear_rgrpd calls kfree(rgd->rd_bits) before calling
return_all_reservations, but return_all_reservations still dereferences
rgd->rd_bits in __rs_deltree. Fix that by moving the call to kfree below the
call to return_all_reservations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-----BEGIN PGP SIGNATURE-----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=v0Gd
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20201029' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
- Fix copy_file_range() to an afs file now returning EINVAL if the
splice_write file op isn't supplied.
- Fix a deref-before-check in afs_unuse_cell().
- Fix a use-after-free in afs_xattr_get_acl().
- Fix afs to not try to clear PG_writeback when laundering a page.
- Fix afs to take a ref on a page that it sets PG_private on and to
drop that ref when clearing PG_private. This is done through recently
added helpers.
- Fix a page leak if write_begin() fails.
- Fix afs_write_begin() to not alter the dirty region info stored in
page->private, but rather do this in afs_write_end() instead when we
know what we actually changed.
- Fix afs_invalidatepage() to alter the dirty region info on a page
when partial page invalidation occurs so that we don't inadvertantly
include a span of zeros that will get written back if a page gets
laundered due to a remote 3rd-party induced invalidation.
We mustn't, however, reduce the dirty region if the page has been
seen to be mapped (ie. we got called through the page_mkwrite vector)
as the page might still be mapped and we might lose data if the file
is extended again.
- Fix the dirty region info to have a lower resolution if the size of
the page is too large for this to be encoded (e.g. powerpc32 with 64K
pages).
Note that this might not be the ideal way to handle this, since it
may allow some leakage of undirtied zero bytes to the server's copy
in the case of a 3rd-party conflict.
To aid the last two fixes, two additional changes:
- Wrap the manipulations of the dirty region info stored in
page->private into helper functions.
- Alter the encoding of the dirty region so that the region bounds can
be stored with one fewer bit, making a bit available for the
indication of mappedness.
* tag 'afs-fixes-20201029' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix dirty-region encoding on ppc32 with 64K pages
afs: Fix afs_invalidatepage to adjust the dirty region
afs: Alter dirty range encoding in page->private
afs: Wrap page->private manipulations in inline functions
afs: Fix where page->private is set during write
afs: Fix page leak on afs_write_begin() failure
afs: Fix to take ref on page when PG_private is set
afs: Fix afs_launder_page to not clear PG_writeback
afs: Fix a use after free in afs_xattr_get_acl()
afs: Fix tracing deref-before-check
afs: Fix copy_file_range()
data=journal bug fix. Also use the generic casefolding support which
has now landed in fs/libfs.c for 5.10.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl+aP/IACgkQ8vlZVpUN
gaM62gf+JWHXh4d4RS4UcFlQWmT0JlMK8AGEdt90PGeJwO7MmAUC8KRFdMxCSdMQ
yqJObRH9w7AFVZYCdroLIC2MyeXj4rASD7DxMgFhu/LYrKOTxCHiTt9gdx/slELM
HQoKB77pYs4AZOMPgo+svqf9aHtHPu1Bk3M2C5WW4/BZHjKCxXDD7wONPFLHOq/0
qTcj2JS+1GAivNzwq8/ZFntmbz316FuKF3LNVUvCP+aTbOwD77NtyaBDGr8pnsnz
duNyX4CYPo27FM9K/ywGQL9ISCIRxEwPN0GeILc3Cawu6bsr5z+ZBYKbt3DuUv18
hl+E7wrOG/+EMLd6TBfvRN1v5YvwPg==
=0J5C
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes for the new ext4 fast commit feature, plus a fix for the
'data=journal' bug fix.
Also use the generic casefolding support which has now landed in
fs/libfs.c for 5.10"
* tag 'ext4_for_linus_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: indicate that fast_commit is available via /sys/fs/ext4/feature/...
ext4: use generic casefolding support
ext4: do not use extent after put_bh
ext4: use IS_ERR() for error checking of path
ext4: fix mmap write protection for data=journal mode
jbd2: fix a kernel-doc markup
ext4: use s_mount_flags instead of s_mount_state for fast commit state
ext4: make num of fast commit blocks configurable
ext4: properly check for dirty state in ext4_inode_datasync_dirty()
ext4: fix double locking in ext4_fc_commit_dentry_updates()
Make sure that we actually initialize xefi_discard when we're scheduling
a deferred free of an AGFL block. This was (eventually) found by the
UBSAN while I was banging on realtime rmap problems, but it exists in
the upstream codebase. While we're at it, rearrange the structure to
reduce the struct size from 64 to 56 bytes.
Fixes: fcb762f5de ("xfs: add bmapi nodiscard flag")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The dirty region bounds stored in page->private on an afs page are 15 bits
on a 32-bit box and can, at most, represent a range of up to 32K within a
32K page with a resolution of 1 byte. This is a problem for powerpc32 with
64K pages enabled.
Further, transparent huge pages may get up to 2M, which will be a problem
for the afs filesystem on all 32-bit arches in the future.
Fix this by decreasing the resolution. For the moment, a 64K page will
have a resolution determined from PAGE_SIZE. In the future, the page will
need to be passed in to the helper functions so that the page size can be
assessed and the resolution determined dynamically.
Note that this might not be the ideal way to handle this, since it may
allow some leakage of undirtied zero bytes to the server's copy in the case
of a 3rd-party conflict. Fixing that would require a separately allocated
record and is a more complicated fix.
Fixes: 4343d00872 ("afs: Get rid of the afs_writeback record")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fix afs_invalidatepage() to adjust the dirty region recorded in
page->private when truncating a page. If the dirty region is entirely
removed, then the private data is cleared and the page dirty state is
cleared.
Without this, if the page is truncated and then expanded again by truncate,
zeros from the expanded, but no-longer dirty region may get written back to
the server if the page gets laundered due to a conflicting 3rd-party write.
It mustn't, however, shorten the dirty region of the page if that page is
still mmapped and has been marked dirty by afs_page_mkwrite(), so a flag is
stored in page->private to record this.
Fixes: 4343d00872 ("afs: Get rid of the afs_writeback record")
Signed-off-by: David Howells <dhowells@redhat.com>
Currently, page->private on an afs page is used to store the range of
dirtied data within the page, where the range includes the lower bound, but
excludes the upper bound (e.g. 0-1 is a range covering a single byte).
This, however, requires a superfluous bit for the last-byte bound so that
on a 4KiB page, it can say 0-4096 to indicate the whole page, the idea
being that having both numbers the same would indicate an empty range.
This is unnecessary as the PG_private bit is clear if it's an empty range
(as is PG_dirty).
Alter the way the dirty range is encoded in page->private such that the
upper bound is reduced by 1 (e.g. 0-0 is then specified the same single
byte range mentioned above).
Applying this to both bounds frees up two bits, one of which can be used in
a future commit.
This allows the afs filesystem to be compiled on ppc32 with 64K pages;
without this, the following warnings are seen:
../fs/afs/internal.h: In function 'afs_page_dirty_to':
../fs/afs/internal.h:881:15: warning: right shift count >= width of type [-Wshift-count-overflow]
881 | return (priv >> __AFS_PAGE_PRIV_SHIFT) & __AFS_PAGE_PRIV_MASK;
| ^~
../fs/afs/internal.h: In function 'afs_page_dirty':
../fs/afs/internal.h:886:28: warning: left shift count >= width of type [-Wshift-count-overflow]
886 | return ((unsigned long)to << __AFS_PAGE_PRIV_SHIFT) | from;
| ^~
Fixes: 4343d00872 ("afs: Get rid of the afs_writeback record")
Signed-off-by: David Howells <dhowells@redhat.com>
The afs filesystem uses page->private to store the dirty range within a
page such that in the event of a conflicting 3rd-party write to the server,
we write back just the bits that got changed locally.
However, there are a couple of problems with this:
(1) I need a bit to note if the page might be mapped so that partial
invalidation doesn't shrink the range.
(2) There aren't necessarily sufficient bits to store the entire range of
data altered (say it's a 32-bit system with 64KiB pages or transparent
huge pages are in use).
So wrap the accesses in inline functions so that future commits can change
how this works.
Also move them out of the tracing header into the in-directory header.
There's not really any need for them to be in the tracing header.
Signed-off-by: David Howells <dhowells@redhat.com>
In afs, page->private is set to indicate the dirty region of a page. This
is done in afs_write_begin(), but that can't take account of whether the
copy into the page actually worked.
Fix this by moving the change of page->private into afs_write_end().
Fixes: 4343d00872 ("afs: Get rid of the afs_writeback record")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the leak of the target page in afs_write_begin() when it fails.
Fixes: 15b4650e55 ("afs: convert to new aops")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Nick Piggin <npiggin@gmail.com>
Fix afs to take a ref on a page when it sets PG_private on it and to drop
the ref when removing the flag.
Note that in afs_write_begin(), a lot of the time, PG_private is already
set on a page to which we're going to add some data. In such a case, we
leave the bit set and mustn't increment the page count.
As suggested by Matthew Wilcox, use attach/detach_page_private() where
possible.
Fixes: 31143d5d51 ("AFS: implement basic file write support")
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
This switches ext4 over to the generic support provided in libfs.
Since casefolded dentries behave the same in ext4 and f2fs, we decrease
the maintenance burden by unifying them, and any optimizations will
immediately apply to both.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20201028050820.1636571-1-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_ext_search_right() will read more extent blocks and call put_bh
after we get the information we need. However, ret_ex will break this
and may cause use-after-free once pagecache has been freed. Fix it by
copying the extent structure if needed.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20201028055617.2569255-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
With this fix, fast commit recovery code uses IS_ERR() for path
returned by ext4_find_extent.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027204342.2794949-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit afb585a97f "ext4: data=journal: write-protect pages on
j_submit_inode_data_buffers()") added calls ext4_jbd2_inode_add_write()
to track inode ranges whose mappings need to get write-protected during
transaction commits. However the added calls use wrong start of a range
(0 instead of page offset) and so write protection is not necessarily
effective. Use correct range start to fix the problem.
Fixes: afb585a97f ("ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201027132751.29858-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4's fast commit related transient states should use
sb->s_mount_flags instead of persistent sb->s_mount_state.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch reserves a field in the jbd2 superblock for number of fast
commit blocks. When this value is non-zero, Ext4 uses this field to
set the number of fast commit blocks.
Fixes: 6866d7b3f2 ("ext4/jbd2: add fast commit initialization")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_inode_datasync_dirty() needs to return 'true' if the inode is
dirty, 'false' otherwise, but the logic seems to be incorrectly changed
by commit aa75f4d3da ("ext4: main fast-commit commit path").
This introduces a problem with swap files that are always failing to be
activated, showing this error in dmesg:
[ 34.406479] swapon: file is not committed
Simple test case to reproduce the problem:
# fallocate -l 8G swapfile
# chmod 0600 swapfile
# mkswap swapfile
# swapon swapfile
Fix the logic to return the proper state of the inode.
Link: https://lore.kernel.org/lkml/20201024131333.GA32124@xps-13-7390
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix afs_launder_page() to not clear PG_writeback on the page it is
laundering as the flag isn't set in this case.
Fixes: 4343d00872 ("afs: Get rid of the afs_writeback record")
Signed-off-by: David Howells <dhowells@redhat.com>
The "op" pointer is freed earlier when we call afs_put_operation().
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Colin Ian King <colin.king@canonical.com>
The patch dca54a7bbb: "afs: Add tracing for cell refcount and active user
count" from Oct 13, 2020, leads to the following Smatch complaint:
fs/afs/cell.c:596 afs_unuse_cell()
warn: variable dereferenced before check 'cell' (see line 592)
Fix this by moving the retrieval of the cell debug ID to after the check of
the validity of the cell pointer.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: dca54a7bbb ("afs: Add tracing for cell refcount and active user count")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Dan Carpenter <dan.carpenter@oracle.com>
The prevention of splice-write without explicit ops made the
copy_file_write() syscall to an afs file (as done by the generic/112
xfstest) fail with EINVAL.
Fix by using iter_file_splice_write() for afs.
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
By doing so we can associate the sequence counter to the chunk_mutex
for lockdep purposes (compiled-out otherwise), the mutex is otherwise
used on the write side.
Also avoid explicitly disabling preemption around the write region as it
will now be done automatically by the seqcount machinery based on the
lock type.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we switched to the iomap infrastructure in b5ff9f1a96e8f ("btrfs:
switch to iomap for direct IO") we're calling generic_file_buffered_read()
directly and not via generic_file_read_iter() anymore.
If the read could read everything there is no need to bother calling
generic_file_buffered_read(), like it is handled in
generic_file_read_iter().
If we call generic_file_buffered_read() in this case we can hit a
situation where we do an invalid readahead and cause this UBSAN splat
in fstest generic/091:
run fstests generic/091 at 2020-10-21 10:52:32
================================================================================
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 656 Comm: fsx Not tainted 5.9.0-rc7+ #821
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77
dump_stack+0x57/0x70 lib/dump_stack.c:118
ubsan_epilogue+0x5/0x40 lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xe9 lib/ubsan.c:395
__roundup_pow_of_two ./include/linux/log2.h:57
get_init_ra_size mm/readahead.c:318
ondemand_readahead.cold+0x16/0x2c mm/readahead.c:530
generic_file_buffered_read+0x3ac/0x840 mm/filemap.c:2199
call_read_iter ./include/linux/fs.h:1876
new_sync_read+0x102/0x180 fs/read_write.c:415
vfs_read+0x11c/0x1a0 fs/read_write.c:481
ksys_read+0x4f/0xc0 fs/read_write.c:615
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9 arch/x86/entry/entry_64.S:118
RIP: 0033:0x7fe87fee992e
RSP: 002b:00007ffe01605278 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000000000004f000 RCX: 00007fe87fee992e
RDX: 0000000000004000 RSI: 0000000001677000 RDI: 0000000000000003
RBP: 000000000004f000 R08: 0000000000004000 R09: 000000000004f000
R10: 0000000000053000 R11: 0000000000000246 R12: 0000000000004000
R13: 0000000000000000 R14: 000000000007a120 R15: 0000000000000000
================================================================================
BTRFS info (device nullb0): has skinny extents
BTRFS info (device nullb0): ZONED mode enabled, zone size 268435456 B
BTRFS info (device nullb0): enabling ssd optimizations
Fixes: f85781fb50 ("btrfs: switch to iomap for direct IO")
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If ->readpage returns an error, it has already unlocked the page.
Fixes: 5e929b33c3 ("CacheFiles: Handle truncate unlocking the page we're reading")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I got the following lockdep splat with tree locks converted to rwsem
patches on btrfs/104:
======================================================
WARNING: possible circular locking dependency detected
5.9.0+ #102 Not tainted
------------------------------------------------------
btrfs-cleaner/903 is trying to acquire lock:
ffff8e7fab6ffe30 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x170
but task is already holding lock:
ffff8e7fab628a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&fs_info->commit_root_sem){++++}-{3:3}:
down_read+0x40/0x130
caching_thread+0x53/0x5a0
btrfs_work_helper+0xfa/0x520
process_one_work+0x238/0x540
worker_thread+0x55/0x3c0
kthread+0x13a/0x150
ret_from_fork+0x1f/0x30
-> #2 (&caching_ctl->mutex){+.+.}-{3:3}:
__mutex_lock+0x7e/0x7b0
btrfs_cache_block_group+0x1e0/0x510
find_free_extent+0xb6e/0x12f0
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb1/0x330
alloc_tree_block_no_bg_flush+0x4f/0x60
__btrfs_cow_block+0x11d/0x580
btrfs_cow_block+0x10c/0x220
commit_cowonly_roots+0x47/0x2e0
btrfs_commit_transaction+0x595/0xbd0
sync_filesystem+0x74/0x90
generic_shutdown_super+0x22/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20
deactivate_locked_super+0x36/0xa0
cleanup_mnt+0x12d/0x190
task_work_run+0x5c/0xa0
exit_to_user_mode_prepare+0x1df/0x200
syscall_exit_to_user_mode+0x54/0x280
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&space_info->groups_sem){++++}-{3:3}:
down_read+0x40/0x130
find_free_extent+0x2ed/0x12f0
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb1/0x330
alloc_tree_block_no_bg_flush+0x4f/0x60
__btrfs_cow_block+0x11d/0x580
btrfs_cow_block+0x10c/0x220
commit_cowonly_roots+0x47/0x2e0
btrfs_commit_transaction+0x595/0xbd0
sync_filesystem+0x74/0x90
generic_shutdown_super+0x22/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20
deactivate_locked_super+0x36/0xa0
cleanup_mnt+0x12d/0x190
task_work_run+0x5c/0xa0
exit_to_user_mode_prepare+0x1df/0x200
syscall_exit_to_user_mode+0x54/0x280
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (btrfs-root-00){++++}-{3:3}:
__lock_acquire+0x1167/0x2150
lock_acquire+0xb9/0x3d0
down_read_nested+0x43/0x130
__btrfs_tree_read_lock+0x32/0x170
__btrfs_read_lock_root_node+0x3a/0x50
btrfs_search_slot+0x614/0x9d0
btrfs_find_root+0x35/0x1b0
btrfs_read_tree_root+0x61/0x120
btrfs_get_root_ref+0x14b/0x600
find_parent_nodes+0x3e6/0x1b30
btrfs_find_all_roots_safe+0xb4/0x130
btrfs_find_all_roots+0x60/0x80
btrfs_qgroup_trace_extent_post+0x27/0x40
btrfs_add_delayed_data_ref+0x3fd/0x460
btrfs_free_extent+0x42/0x100
__btrfs_mod_ref+0x1d7/0x2f0
walk_up_proc+0x11c/0x400
walk_up_tree+0xf0/0x180
btrfs_drop_snapshot+0x1c7/0x780
btrfs_clean_one_deleted_snapshot+0xfb/0x110
cleaner_kthread+0xd4/0x140
kthread+0x13a/0x150
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Chain exists of:
btrfs-root-00 --> &caching_ctl->mutex --> &fs_info->commit_root_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->commit_root_sem);
lock(&caching_ctl->mutex);
lock(&fs_info->commit_root_sem);
lock(btrfs-root-00);
*** DEADLOCK ***
3 locks held by btrfs-cleaner/903:
#0: ffff8e7fab628838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x6e/0x140
#1: ffff8e7faadac640 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x40b/0x5c0
#2: ffff8e7fab628a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80
stack backtrace:
CPU: 0 PID: 903 Comm: btrfs-cleaner Not tainted 5.9.0+ #102
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x8b/0xb0
check_noncircular+0xcf/0xf0
__lock_acquire+0x1167/0x2150
? __bfs+0x42/0x210
lock_acquire+0xb9/0x3d0
? __btrfs_tree_read_lock+0x32/0x170
down_read_nested+0x43/0x130
? __btrfs_tree_read_lock+0x32/0x170
__btrfs_tree_read_lock+0x32/0x170
__btrfs_read_lock_root_node+0x3a/0x50
btrfs_search_slot+0x614/0x9d0
? find_held_lock+0x2b/0x80
btrfs_find_root+0x35/0x1b0
? do_raw_spin_unlock+0x4b/0xa0
btrfs_read_tree_root+0x61/0x120
btrfs_get_root_ref+0x14b/0x600
find_parent_nodes+0x3e6/0x1b30
btrfs_find_all_roots_safe+0xb4/0x130
btrfs_find_all_roots+0x60/0x80
btrfs_qgroup_trace_extent_post+0x27/0x40
btrfs_add_delayed_data_ref+0x3fd/0x460
btrfs_free_extent+0x42/0x100
__btrfs_mod_ref+0x1d7/0x2f0
walk_up_proc+0x11c/0x400
walk_up_tree+0xf0/0x180
btrfs_drop_snapshot+0x1c7/0x780
? btrfs_clean_one_deleted_snapshot+0x73/0x110
btrfs_clean_one_deleted_snapshot+0xfb/0x110
cleaner_kthread+0xd4/0x140
? btrfs_alloc_root+0x50/0x50
kthread+0x13a/0x150
? kthread_create_worker_on_cpu+0x40/0x40
ret_from_fork+0x1f/0x30
BTRFS info (device sdb): disk space caching is enabled
BTRFS info (device sdb): has skinny extents
This happens because qgroups does a backref lookup when we create a
delayed ref. From here it may have to look up a root from an indirect
ref, which does a normal lookup on the tree_root, which takes the read
lock on the tree_root nodes.
To fix this we need to add a variant for looking up roots that searches
the commit root of the tree_root. Then when we do the backref search
using the commit root we are sure to not take any locks on the tree_root
nodes. This gets rid of the lockdep splat when running btrfs/104.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When enabling qgroups we walk the tree_root and then add a qgroup item
for every root that we have. This creates a lock dependency on the
tree_root and qgroup_root, which results in the following lockdep splat
(with tree locks using rwsem), eg. in tests btrfs/017 or btrfs/022:
======================================================
WARNING: possible circular locking dependency detected
5.9.0-default+ #1299 Not tainted
------------------------------------------------------
btrfs/24552 is trying to acquire lock:
ffff9142dfc5f630 (btrfs-quota-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
but task is already holding lock:
ffff9142dfc5d0b0 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (btrfs-root-00){++++}-{3:3}:
__lock_acquire+0x3fb/0x730
lock_acquire.part.0+0x6a/0x130
down_read_nested+0x46/0x130
__btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
__btrfs_read_lock_root_node+0x3a/0x50 [btrfs]
btrfs_search_slot_get_root+0x11d/0x290 [btrfs]
btrfs_search_slot+0xc3/0x9f0 [btrfs]
btrfs_insert_item+0x6e/0x140 [btrfs]
btrfs_create_tree+0x1cb/0x240 [btrfs]
btrfs_quota_enable+0xcd/0x790 [btrfs]
btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs]
__x64_sys_ioctl+0x83/0xa0
do_syscall_64+0x2d/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (btrfs-quota-00){++++}-{3:3}:
check_prev_add+0x91/0xc30
validate_chain+0x491/0x750
__lock_acquire+0x3fb/0x730
lock_acquire.part.0+0x6a/0x130
down_read_nested+0x46/0x130
__btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
__btrfs_read_lock_root_node+0x3a/0x50 [btrfs]
btrfs_search_slot_get_root+0x11d/0x290 [btrfs]
btrfs_search_slot+0xc3/0x9f0 [btrfs]
btrfs_insert_empty_items+0x58/0xa0 [btrfs]
add_qgroup_item.part.0+0x72/0x210 [btrfs]
btrfs_quota_enable+0x3bb/0x790 [btrfs]
btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs]
__x64_sys_ioctl+0x83/0xa0
do_syscall_64+0x2d/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-root-00);
lock(btrfs-quota-00);
lock(btrfs-root-00);
lock(btrfs-quota-00);
*** DEADLOCK ***
5 locks held by btrfs/24552:
#0: ffff9142df431478 (sb_writers#10){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0xa0
#1: ffff9142f9b10cc0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl_quota_ctl+0x7b/0xe0 [btrfs]
#2: ffff9142f9b11a08 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_enable+0x3b/0x790 [btrfs]
#3: ffff9142df431698 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x406/0x510 [btrfs]
#4: ffff9142dfc5d0b0 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
stack backtrace:
CPU: 1 PID: 24552 Comm: btrfs Not tainted 5.9.0-default+ #1299
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0x77/0x97
check_noncircular+0xf3/0x110
check_prev_add+0x91/0xc30
validate_chain+0x491/0x750
__lock_acquire+0x3fb/0x730
lock_acquire.part.0+0x6a/0x130
? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
? lock_acquire+0xc4/0x140
? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
down_read_nested+0x46/0x130
? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
__btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
? btrfs_root_node+0xd9/0x200 [btrfs]
__btrfs_read_lock_root_node+0x3a/0x50 [btrfs]
btrfs_search_slot_get_root+0x11d/0x290 [btrfs]
btrfs_search_slot+0xc3/0x9f0 [btrfs]
btrfs_insert_empty_items+0x58/0xa0 [btrfs]
add_qgroup_item.part.0+0x72/0x210 [btrfs]
btrfs_quota_enable+0x3bb/0x790 [btrfs]
btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs]
__x64_sys_ioctl+0x83/0xa0
do_syscall_64+0x2d/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by dropping the path whenever we find a root item, add the
qgroup item, and then re-lookup the root item we found and continue
processing roots.
Reported-by: David Sterba <dsterba@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Very sporadically I had test case btrfs/069 from fstests hanging (for
years, it is not a recent regression), with the following traces in
dmesg/syslog:
[162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started
[162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0
[162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished
[162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds.
[162513.514318] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.514747] task:btrfs-transacti state:D stack: 0 pid:1356167 ppid: 2 flags:0x00004000
[162513.514751] Call Trace:
[162513.514761] __schedule+0x5ce/0xd00
[162513.514765] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.514771] schedule+0x46/0xf0
[162513.514844] wait_current_trans+0xde/0x140 [btrfs]
[162513.514850] ? finish_wait+0x90/0x90
[162513.514864] start_transaction+0x37c/0x5f0 [btrfs]
[162513.514879] transaction_kthread+0xa4/0x170 [btrfs]
[162513.514891] ? btrfs_cleanup_transaction+0x660/0x660 [btrfs]
[162513.514894] kthread+0x153/0x170
[162513.514897] ? kthread_stop+0x2c0/0x2c0
[162513.514902] ret_from_fork+0x22/0x30
[162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds.
[162513.515192] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.515680] task:fsstress state:D stack: 0 pid:1356184 ppid:1356177 flags:0x00004000
[162513.515682] Call Trace:
[162513.515688] __schedule+0x5ce/0xd00
[162513.515691] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.515697] schedule+0x46/0xf0
[162513.515712] wait_current_trans+0xde/0x140 [btrfs]
[162513.515716] ? finish_wait+0x90/0x90
[162513.515729] start_transaction+0x37c/0x5f0 [btrfs]
[162513.515743] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
[162513.515753] btrfs_sync_fs+0x61/0x1c0 [btrfs]
[162513.515758] ? __ia32_sys_fdatasync+0x20/0x20
[162513.515761] iterate_supers+0x87/0xf0
[162513.515765] ksys_sync+0x60/0xb0
[162513.515768] __do_sys_sync+0xa/0x10
[162513.515771] do_syscall_64+0x33/0x80
[162513.515774] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.515781] RIP: 0033:0x7f5238f50bd7
[162513.515782] Code: Bad RIP value.
[162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
[162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
[162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a
[162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0
[162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a
[162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
[162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds.
[162513.516064] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.516617] task:fsstress state:D stack: 0 pid:1356185 ppid:1356177 flags:0x00000000
[162513.516620] Call Trace:
[162513.516625] __schedule+0x5ce/0xd00
[162513.516628] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.516634] schedule+0x46/0xf0
[162513.516647] wait_current_trans+0xde/0x140 [btrfs]
[162513.516650] ? finish_wait+0x90/0x90
[162513.516662] start_transaction+0x4d7/0x5f0 [btrfs]
[162513.516679] btrfs_setxattr_trans+0x3c/0x100 [btrfs]
[162513.516686] __vfs_setxattr+0x66/0x80
[162513.516691] __vfs_setxattr_noperm+0x70/0x200
[162513.516697] vfs_setxattr+0x6b/0x120
[162513.516703] setxattr+0x125/0x240
[162513.516709] ? lock_acquire+0xb1/0x480
[162513.516712] ? mnt_want_write+0x20/0x50
[162513.516721] ? rcu_read_lock_any_held+0x8e/0xb0
[162513.516723] ? preempt_count_add+0x49/0xa0
[162513.516725] ? __sb_start_write+0x19b/0x290
[162513.516727] ? preempt_count_add+0x49/0xa0
[162513.516732] path_setxattr+0xba/0xd0
[162513.516739] __x64_sys_setxattr+0x27/0x30
[162513.516741] do_syscall_64+0x33/0x80
[162513.516743] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.516745] RIP: 0033:0x7f5238f56d5a
[162513.516746] Code: Bad RIP value.
[162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc
[162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a
[162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470
[162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700
[162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004
[162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0
[162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds.
[162513.517064] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.517763] task:fsstress state:D stack: 0 pid:1356196 ppid:1356177 flags:0x00004000
[162513.517780] Call Trace:
[162513.517786] __schedule+0x5ce/0xd00
[162513.517789] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.517796] schedule+0x46/0xf0
[162513.517810] wait_current_trans+0xde/0x140 [btrfs]
[162513.517814] ? finish_wait+0x90/0x90
[162513.517829] start_transaction+0x37c/0x5f0 [btrfs]
[162513.517845] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
[162513.517857] btrfs_sync_fs+0x61/0x1c0 [btrfs]
[162513.517862] ? __ia32_sys_fdatasync+0x20/0x20
[162513.517865] iterate_supers+0x87/0xf0
[162513.517869] ksys_sync+0x60/0xb0
[162513.517872] __do_sys_sync+0xa/0x10
[162513.517875] do_syscall_64+0x33/0x80
[162513.517878] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.517881] RIP: 0033:0x7f5238f50bd7
[162513.517883] Code: Bad RIP value.
[162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
[162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
[162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053
[162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0
[162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053
[162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
[162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds.
[162513.518298] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.519157] task:fsstress state:D stack: 0 pid:1356197 ppid:1356177 flags:0x00000000
[162513.519160] Call Trace:
[162513.519165] __schedule+0x5ce/0xd00
[162513.519168] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.519174] schedule+0x46/0xf0
[162513.519190] wait_current_trans+0xde/0x140 [btrfs]
[162513.519193] ? finish_wait+0x90/0x90
[162513.519206] start_transaction+0x4d7/0x5f0 [btrfs]
[162513.519222] btrfs_create+0x57/0x200 [btrfs]
[162513.519230] lookup_open+0x522/0x650
[162513.519246] path_openat+0x2b8/0xa50
[162513.519270] do_filp_open+0x91/0x100
[162513.519275] ? find_held_lock+0x32/0x90
[162513.519280] ? lock_acquired+0x33b/0x470
[162513.519285] ? do_raw_spin_unlock+0x4b/0xc0
[162513.519287] ? _raw_spin_unlock+0x29/0x40
[162513.519295] do_sys_openat2+0x20d/0x2d0
[162513.519300] do_sys_open+0x44/0x80
[162513.519304] do_syscall_64+0x33/0x80
[162513.519307] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.519309] RIP: 0033:0x7f5238f4a903
[162513.519310] Code: Bad RIP value.
[162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
[162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903
[162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470
[162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002
[162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013
[162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620
[162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds.
[162513.519727] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.520508] task:btrfs state:D stack: 0 pid:1356211 ppid:1356178 flags:0x00004002
[162513.520511] Call Trace:
[162513.520516] __schedule+0x5ce/0xd00
[162513.520519] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.520525] schedule+0x46/0xf0
[162513.520544] btrfs_scrub_pause+0x11f/0x180 [btrfs]
[162513.520548] ? finish_wait+0x90/0x90
[162513.520562] btrfs_commit_transaction+0x45a/0xc30 [btrfs]
[162513.520574] ? start_transaction+0xe0/0x5f0 [btrfs]
[162513.520596] btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs]
[162513.520619] btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs]
[162513.520639] btrfs_ioctl+0x2a25/0x36f0 [btrfs]
[162513.520643] ? do_sigaction+0xf3/0x240
[162513.520645] ? find_held_lock+0x32/0x90
[162513.520648] ? do_sigaction+0xf3/0x240
[162513.520651] ? lock_acquired+0x33b/0x470
[162513.520655] ? _raw_spin_unlock_irq+0x24/0x50
[162513.520657] ? lockdep_hardirqs_on+0x7d/0x100
[162513.520660] ? _raw_spin_unlock_irq+0x35/0x50
[162513.520662] ? do_sigaction+0xf3/0x240
[162513.520671] ? __x64_sys_ioctl+0x83/0xb0
[162513.520672] __x64_sys_ioctl+0x83/0xb0
[162513.520677] do_syscall_64+0x33/0x80
[162513.520679] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.520681] RIP: 0033:0x7fc3cd307d87
[162513.520682] Code: Bad RIP value.
[162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87
[162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003
[162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003
[162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001
[162513.520703]
Showing all locks held in the system:
[162513.520712] 1 lock held by khungtaskd/54:
[162513.520713] #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197
[162513.520728] 1 lock held by in:imklog/596:
[162513.520729] #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60
[162513.520782] 1 lock held by btrfs-transacti/1356167:
[162513.520784] #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs]
[162513.520798] 1 lock held by btrfs/1356190:
[162513.520800] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60
[162513.520805] 1 lock held by fsstress/1356184:
[162513.520806] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
[162513.520811] 3 locks held by fsstress/1356185:
[162513.520812] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
[162513.520815] #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120
[162513.520820] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
[162513.520833] 1 lock held by fsstress/1356196:
[162513.520834] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
[162513.520838] 3 locks held by fsstress/1356197:
[162513.520839] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
[162513.520843] #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50
[162513.520846] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
[162513.520858] 2 locks held by btrfs/1356211:
[162513.520859] #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs]
[162513.520877] #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
This was weird because the stack traces show that a transaction commit,
triggered by a device replace operation, is blocking trying to pause any
running scrubs but there are no stack traces of blocked tasks doing a
scrub.
After poking around with drgn, I noticed there was a scrub task that was
constantly running and blocking for shorts periods of time:
>>> t = find_task(prog, 1356190)
>>> prog.stack_trace(t)
#0 __schedule+0x5ce/0xcfc
#1 schedule+0x46/0xe4
#2 schedule_timeout+0x1df/0x475
#3 btrfs_reada_wait+0xda/0x132
#4 scrub_stripe+0x2a8/0x112f
#5 scrub_chunk+0xcd/0x134
#6 scrub_enumerate_chunks+0x29e/0x5ee
#7 btrfs_scrub_dev+0x2d5/0x91b
#8 btrfs_ioctl+0x7f5/0x36e7
#9 __x64_sys_ioctl+0x83/0xb0
#10 do_syscall_64+0x33/0x77
#11 entry_SYSCALL_64+0x7c/0x156
Which corresponds to:
int btrfs_reada_wait(void *handle)
{
struct reada_control *rc = handle;
struct btrfs_fs_info *fs_info = rc->fs_info;
while (atomic_read(&rc->elems)) {
if (!atomic_read(&fs_info->reada_works_cnt))
reada_start_machine(fs_info);
wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0,
(HZ + 9) / 10);
}
(...)
So the counter "rc->elems" was set to 1 and never decreased to 0, causing
the scrub task to loop forever in that function. Then I used the following
script for drgn to check the readahead requests:
$ cat dump_reada.py
import sys
import drgn
from drgn import NULL, Object, cast, container_of, execscript, \
reinterpret, sizeof
from drgn.helpers.linux import *
mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"
mnt = None
for mnt in for_each_mount(prog, dst = mnt_path):
pass
if mnt is None:
sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
sys.exit(1)
fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)
def dump_re(re):
nzones = re.nzones.value_()
print(f're at {hex(re.value_())}')
print(f'\t logical {re.logical.value_()}')
print(f'\t refcnt {re.refcnt.value_()}')
print(f'\t nzones {nzones}')
for i in range(nzones):
dev = re.zones[i].device
name = dev.name.str.string_()
print(f'\t\t dev id {dev.devid.value_()} name {name}')
print()
for _, e in radix_tree_for_each(fs_info.reada_tree):
re = cast('struct reada_extent *', e)
dump_re(re)
$ drgn dump_reada.py
re at 0xffff8f3da9d25ad8
logical 38928384
refcnt 1
nzones 1
dev id 0 name b'/dev/sdd'
$
So there was one readahead extent with a single zone corresponding to the
source device of that last device replace operation logged in dmesg/syslog.
Also the ID of that zone's device was 0 which is a special value set in
the source device of a device replace operation when the operation finishes
(constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()),
confirming again that device /dev/sdd was the source of a device replace
operation.
Normally there should be as many zones in the readahead extent as there are
devices, and I wasn't expecting the extent to be in a block group with a
'single' profile, so I went and confirmed with the following drgn script
that there weren't any single profile block groups:
$ cat dump_block_groups.py
import sys
import drgn
from drgn import NULL, Object, cast, container_of, execscript, \
reinterpret, sizeof
from drgn.helpers.linux import *
mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"
mnt = None
for mnt in for_each_mount(prog, dst = mnt_path):
pass
if mnt is None:
sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
sys.exit(1)
fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)
BTRFS_BLOCK_GROUP_DATA = (1 << 0)
BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1)
BTRFS_BLOCK_GROUP_METADATA = (1 << 2)
BTRFS_BLOCK_GROUP_RAID0 = (1 << 3)
BTRFS_BLOCK_GROUP_RAID1 = (1 << 4)
BTRFS_BLOCK_GROUP_DUP = (1 << 5)
BTRFS_BLOCK_GROUP_RAID10 = (1 << 6)
BTRFS_BLOCK_GROUP_RAID5 = (1 << 7)
BTRFS_BLOCK_GROUP_RAID6 = (1 << 8)
BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9)
BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10)
def bg_flags_string(bg):
flags = bg.flags.value_()
ret = ''
if flags & BTRFS_BLOCK_GROUP_DATA:
ret = 'data'
if flags & BTRFS_BLOCK_GROUP_METADATA:
if len(ret) > 0:
ret += '|'
ret += 'meta'
if flags & BTRFS_BLOCK_GROUP_SYSTEM:
if len(ret) > 0:
ret += '|'
ret += 'system'
if flags & BTRFS_BLOCK_GROUP_RAID0:
ret += ' raid0'
elif flags & BTRFS_BLOCK_GROUP_RAID1:
ret += ' raid1'
elif flags & BTRFS_BLOCK_GROUP_DUP:
ret += ' dup'
elif flags & BTRFS_BLOCK_GROUP_RAID10:
ret += ' raid10'
elif flags & BTRFS_BLOCK_GROUP_RAID5:
ret += ' raid5'
elif flags & BTRFS_BLOCK_GROUP_RAID6:
ret += ' raid6'
elif flags & BTRFS_BLOCK_GROUP_RAID1C3:
ret += ' raid1c3'
elif flags & BTRFS_BLOCK_GROUP_RAID1C4:
ret += ' raid1c4'
else:
ret += ' single'
return ret
def dump_bg(bg):
print()
print(f'block group at {hex(bg.value_())}')
print(f'\t start {bg.start.value_()} length {bg.length.value_()}')
print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}')
bg_root = fs_info.block_group_cache_tree.address_of_()
for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'):
dump_bg(bg)
$ drgn dump_block_groups.py
block group at 0xffff8f3d673b0400
start 22020096 length 16777216
flags 258 - system raid6
block group at 0xffff8f3d53ddb400
start 38797312 length 536870912
flags 260 - meta raid6
block group at 0xffff8f3d5f4d9c00
start 575668224 length 2147483648
flags 257 - data raid6
block group at 0xffff8f3d08189000
start 2723151872 length 67108864
flags 258 - system raid6
block group at 0xffff8f3db70ff000
start 2790260736 length 1073741824
flags 260 - meta raid6
block group at 0xffff8f3d5f4dd800
start 3864002560 length 67108864
flags 258 - system raid6
block group at 0xffff8f3d67037000
start 3931111424 length 2147483648
flags 257 - data raid6
$
So there were only 2 reasons left for having a readahead extent with a
single zone: reada_find_zone(), called when creating a readahead extent,
returned NULL either because we failed to find the corresponding block
group or because a memory allocation failed. With some additional and
custom tracing I figured out that on every further ocurrence of the
problem the block group had just been deleted when we were looping to
create the zones for the readahead extent (at reada_find_extent()), so we
ended up with only one zone in the readahead extent, corresponding to a
device that ends up getting replaced.
So after figuring that out it became obvious why the hang happens:
1) Task A starts a scrub on any device of the filesystem, except for
device /dev/sdd;
2) Task B starts a device replace with /dev/sdd as the source device;
3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently
starting to scrub a stripe from block group X. This call to
btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add()
calls reada_add_block(), it passes the logical address of the extent
tree's root node as its 'logical' argument - a value of 38928384;
4) Task A then enters reada_find_extent(), called from reada_add_block().
It finds there isn't any existing readahead extent for the logical
address 38928384, so it proceeds to the path of creating a new one.
It calls btrfs_map_block() to find out which stripes exist for the block
group X. On the first iteration of the for loop that iterates over the
stripes, it finds the stripe for device /dev/sdd, so it creates one
zone for that device and adds it to the readahead extent. Before getting
into the second iteration of the loop, the cleanup kthread deletes block
group X because it was empty. So in the iterations for the remaining
stripes it does not add more zones to the readahead extent, because the
calls to reada_find_zone() returned NULL because they couldn't find
block group X anymore.
As a result the new readahead extent has a single zone, corresponding to
the device /dev/sdd;
4) Before task A returns to btrfs_reada_add() and queues the readahead job
for the readahead work queue, task B finishes the device replace and at
btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new
device /dev/sdg;
5) Task A returns to reada_add_block(), which increments the counter
"->elems" of the reada_control structure allocated at btrfs_reada_add().
Then it returns back to btrfs_reada_add() and calls
reada_start_machine(). This queues a job in the readahead work queue to
run the function reada_start_machine_worker(), which calls
__reada_start_machine().
At __reada_start_machine() we take the device list mutex and for each
device found in the current device list, we call
reada_start_machine_dev() to start the readahead work. However at this
point the device /dev/sdd was already freed and is not in the device
list anymore.
This means the corresponding readahead for the extent at 38928384 is
never started, and therefore the "->elems" counter of the reada_control
structure allocated at btrfs_reada_add() never goes down to 0, causing
the call to btrfs_reada_wait(), done by the scrub task, to wait forever.
Note that the readahead request can be made either after the device replace
started or before it started, however in pratice it is very unlikely that a
device replace is able to start after a readahead request is made and is
able to complete before the readahead request completes - maybe only on a
very small and nearly empty filesystem.
This hang however is not the only problem we can have with readahead and
device removals. When the readahead extent has other zones other than the
one corresponding to the device that is being removed (either by a device
replace or a device remove operation), we risk having a use-after-free on
the device when dropping the last reference of the readahead extent.
For example if we create a readahead extent with two zones, one for the
device /dev/sdd and one for the device /dev/sde:
1) Before the readahead worker starts, the device /dev/sdd is removed,
and the corresponding btrfs_device structure is freed. However the
readahead extent still has the zone pointing to the device structure;
2) When the readahead worker starts, it only finds device /dev/sde in the
current device list of the filesystem;
3) It starts the readahead work, at reada_start_machine_dev(), using the
device /dev/sde;
4) Then when it finishes reading the extent from device /dev/sde, it calls
__readahead_hook() which ends up dropping the last reference on the
readahead extent through the last call to reada_extent_put();
5) At reada_extent_put() it iterates over each zone of the readahead extent
and attempts to delete an element from the device's 'reada_extents'
radix tree, resulting in a use-after-free, as the device pointer of the
zone for /dev/sdd is now stale. We can also access the device after
dropping the last reference of a zone, through reada_zone_release(),
also called by reada_extent_put().
And a device remove suffers the same problem, however since it shrinks the
device size down to zero before removing the device, it is very unlikely to
still have readahead requests not completed by the time we free the device,
the only possibility is if the device has a very little space allocated.
While the hang problem is exclusive to scrub, since it is currently the
only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free
problem affects any path that triggers readhead, which includes
btree_readahead_hook() and __readahead_hook() (a readahead worker can
trigger readahed for the children of a node) for example - any path that
ends up calling reada_add_block() can trigger the use-after-free after a
device is removed.
So fix this by waiting for any readahead requests for a device to complete
before removing a device, ensuring that while waiting for existing ones no
new ones can be made.
This problem has been around for a very long time - the readahead code was
added in 2011, device remove exists since 2008 and device replace was
introduced in 2013, hard to pick a specific commit for a git Fixes tag.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fail to find suitable zones for a new readahead extent, we end up
leaving a stale pointer in the global readahead extents radix tree
(fs_info->reada_tree), which can trigger the following trace later on:
[13367.696354] BUG: kernel NULL pointer dereference, address: 00000000000000b0
[13367.696802] #PF: supervisor read access in kernel mode
[13367.697249] #PF: error_code(0x0000) - not-present page
[13367.697721] PGD 0 P4D 0
[13367.698171] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[13367.698632] CPU: 6 PID: 851214 Comm: btrfs Tainted: G W 5.9.0-rc6-btrfs-next-69 #1
[13367.699100] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[13367.700069] RIP: 0010:__lock_acquire+0x20a/0x3970
[13367.700562] Code: ff 1f 0f b7 c0 48 0f (...)
[13367.701609] RSP: 0018:ffffb14448f57790 EFLAGS: 00010046
[13367.702140] RAX: 0000000000000000 RBX: 29b935140c15e8cf RCX: 0000000000000000
[13367.702698] RDX: 0000000000000002 RSI: ffffffffb3d66bd0 RDI: 0000000000000046
[13367.703240] RBP: ffff8a52ba8ac040 R08: 00000c2866ad9288 R09: 0000000000000001
[13367.703783] R10: 0000000000000001 R11: 00000000b66d9b53 R12: ffff8a52ba8ac9b0
[13367.704330] R13: 0000000000000000 R14: ffff8a532b6333e8 R15: 0000000000000000
[13367.704880] FS: 00007fe1df6b5700(0000) GS:ffff8a5376600000(0000) knlGS:0000000000000000
[13367.705438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[13367.705995] CR2: 00000000000000b0 CR3: 000000022cca8004 CR4: 00000000003706e0
[13367.706565] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[13367.707127] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[13367.707686] Call Trace:
[13367.708246] ? ___slab_alloc+0x395/0x740
[13367.708820] ? reada_add_block+0xae/0xee0 [btrfs]
[13367.709383] lock_acquire+0xb1/0x480
[13367.709955] ? reada_add_block+0xe0/0xee0 [btrfs]
[13367.710537] ? reada_add_block+0xae/0xee0 [btrfs]
[13367.711097] ? rcu_read_lock_sched_held+0x5d/0x90
[13367.711659] ? kmem_cache_alloc_trace+0x8d2/0x990
[13367.712221] ? lock_acquired+0x33b/0x470
[13367.712784] _raw_spin_lock+0x34/0x80
[13367.713356] ? reada_add_block+0xe0/0xee0 [btrfs]
[13367.713966] reada_add_block+0xe0/0xee0 [btrfs]
[13367.714529] ? btrfs_root_node+0x15/0x1f0 [btrfs]
[13367.715077] btrfs_reada_add+0x117/0x170 [btrfs]
[13367.715620] scrub_stripe+0x21e/0x10d0 [btrfs]
[13367.716141] ? kvm_sched_clock_read+0x5/0x10
[13367.716657] ? __lock_acquire+0x41e/0x3970
[13367.717184] ? scrub_chunk+0x60/0x140 [btrfs]
[13367.717697] ? find_held_lock+0x32/0x90
[13367.718254] ? scrub_chunk+0x60/0x140 [btrfs]
[13367.718773] ? lock_acquired+0x33b/0x470
[13367.719278] ? scrub_chunk+0xcd/0x140 [btrfs]
[13367.719786] scrub_chunk+0xcd/0x140 [btrfs]
[13367.720291] scrub_enumerate_chunks+0x270/0x5c0 [btrfs]
[13367.720787] ? finish_wait+0x90/0x90
[13367.721281] btrfs_scrub_dev+0x1ee/0x620 [btrfs]
[13367.721762] ? rcu_read_lock_any_held+0x8e/0xb0
[13367.722235] ? preempt_count_add+0x49/0xa0
[13367.722710] ? __sb_start_write+0x19b/0x290
[13367.723192] btrfs_ioctl+0x7f5/0x36f0 [btrfs]
[13367.723660] ? __fget_files+0x101/0x1d0
[13367.724118] ? find_held_lock+0x32/0x90
[13367.724559] ? __fget_files+0x101/0x1d0
[13367.724982] ? __x64_sys_ioctl+0x83/0xb0
[13367.725399] __x64_sys_ioctl+0x83/0xb0
[13367.725802] do_syscall_64+0x33/0x80
[13367.726188] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[13367.726574] RIP: 0033:0x7fe1df7add87
[13367.726948] Code: 00 00 00 48 8b 05 09 91 (...)
[13367.727763] RSP: 002b:00007fe1df6b4d48 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[13367.728179] RAX: ffffffffffffffda RBX: 000055ce1fb596a0 RCX: 00007fe1df7add87
[13367.728604] RDX: 000055ce1fb596a0 RSI: 00000000c400941b RDI: 0000000000000003
[13367.729021] RBP: 0000000000000000 R08: 00007fe1df6b5700 R09: 0000000000000000
[13367.729431] R10: 00007fe1df6b5700 R11: 0000000000000246 R12: 00007ffd922b07de
[13367.729842] R13: 00007ffd922b07df R14: 00007fe1df6b4e40 R15: 0000000000802000
[13367.730275] Modules linked in: btrfs blake2b_generic xor (...)
[13367.732638] CR2: 00000000000000b0
[13367.733166] ---[ end trace d298b6805556acd9 ]---
What happens is the following:
1) At reada_find_extent() we don't find any existing readahead extent for
the metadata extent starting at logical address X;
2) So we proceed to create a new one. We then call btrfs_map_block() to get
information about which stripes contain extent X;
3) After that we iterate over the stripes and create only one zone for the
readahead extent - only one because reada_find_zone() returned NULL for
all iterations except for one, either because a memory allocation failed
or it couldn't find the block group of the extent (it may have just been
deleted);
4) We then add the new readahead extent to the readahead extents radix
tree at fs_info->reada_tree;
5) Then we iterate over each zone of the new readahead extent, and find
that the device used for that zone no longer exists, because it was
removed or it was the source device of a device replace operation.
Since this left 'have_zone' set to 0, after finishing the loop we jump
to the 'error' label, call kfree() on the new readahead extent and
return without removing it from the radix tree at fs_info->reada_tree;
6) Any future call to reada_find_extent() for the logical address X will
find the stale pointer in the readahead extents radix tree, increment
its reference counter, which can trigger the use-after-free right
away or return it to the caller reada_add_block() that results in the
use-after-free of the example trace above.
So fix this by making sure we delete the readahead extent from the radix
tree if we fail to setup zones for it (when 'have_zone = 0').
Fixes: 3194502118 ("btrfs: reada: bypass adding extent when all zone failed")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If there's no parity and num_stripes < ncopies, a crafted image can
trigger a division by zero in calc_stripe_length().
The image was generated through fuzzing.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209587
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch addresses a compile warning:
fs/btrfs/extent-tree.c: In function '__btrfs_free_extent':
fs/btrfs/extent-tree.c:3187:4: warning: format '%lu' expects argument of type 'long unsigned int', but argument 8 has type 'unsigned int' [-Wformat=]
Fixes: 1c2a07f598 ("btrfs: extent-tree: kill BUG_ON() in __btrfs_free_extent()")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Pujin Shi <shipujin.t@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
io_poll_double_wake() is called for both request types - both pure poll
requests, and internal polls. This means that we should be using the
right handler based on the request type. Use the one that the original
caller already assigned for the waitqueue handling, that will always
match the correct type.
Cc: stable@vger.kernel.org # v5.8+
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=4LDZ
-----END PGP SIGNATURE-----
Merge tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
"Add support for stat of various special file types (WSL reparse points
for char, block, fifo)"
* tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb3: add some missing definitions from MS-FSCC
smb3: remove two unused variables
smb3: add support for stat of WSL reparse points for special file types
-----BEGIN PGP SIGNATURE-----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=xidc
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- fsize was missed in previous unification of work flags
- Few fixes cleaning up the flags unification creds cases (Pavel)
- Fix NUMA affinities for completely unplugged/replugged node for io-wq
- Two fallout fixes from the set_fs changes. One local to io_uring, one
for the splice entry point that io_uring uses.
- Linked timeout fixes (Pavel)
- Removal of ->flush() ->files work-around that we don't need anymore
with referenced files (Pavel)
- Various cleanups (Pavel)
* tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block:
splice: change exported internal do_splice() helper to take kernel offset
io_uring: make loop_rw_iter() use original user supplied pointers
io_uring: remove req cancel in ->flush()
io-wq: re-set NUMA node affinities if CPUs come online
io_uring: don't reuse linked_timeout
io_uring: unify fsize with def->work_flags
io_uring: fix racy REQ_F_LINK_TIMEOUT clearing
io_uring: do poll's hash_node init in common code
io_uring: inline io_poll_task_handler()
io_uring: remove extra ->file check in poll prep
io_uring: make cached_cq_overflow non atomic_t
io_uring: inline io_fail_links()
io_uring: kill ref get/drop in personality init
io_uring: flags-based creds init in queue
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place (the largest group here is
Christoph's stat cleanups)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove KSTAT_QUERY_FLAGS
fs: remove vfs_stat_set_lookup_flags
fs: move vfs_fstatat out of line
fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat
fs: remove vfs_statx_fd
fs: omfs: use kmemdup() rather than kmalloc+memcpy
[PATCH] reduce boilerplate in fsid handling
fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS
selftests: mount: add nosymfollow tests
Add a "nosymfollow" mount option.
- Make fallocate check the alignment of its arguments against the
fundamental allocation unit of the volume the file lives on, so that we
don't trigger the fs' alignment checks.
- Cancel unprocessed log intents immediately when log recovery fails, to
avoid a log deadlock.
-----BEGIN PGP SIGNATURE-----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=Bipc
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.10-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Two bug fixes that trickled in during the merge window:
- Make fallocate check the alignment of its arguments against the
fundamental allocation unit of the volume the file lives on, so
that we don't trigger the fs' alignment checks.
- Cancel unprocessed log intents immediately when log recovery fails,
to avoid a log deadlock"
* tag 'xfs-5.10-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: cancel intents immediately if process_intents fails
xfs: fix fallocate functions when rtextsize is larger than 1
Add some structures and defines that were recently added to
the protocol documentation (see MS-FSCC sections 2.3.29-2.3.34).
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix two unused variables in commit
"add support for stat of WSL reparse points for special file types"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Restructure __io_queue_sqe() so it follows simple if/else if/else
control flow. It's more readable and removes extra goto/labels.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't overuse goto's, complex control flow doesn't make compilers happy
and makes code harder to read.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set IO_WQ_WORK_CONCURRENT for all REQ_F_FORCE_ASYNC requests, do that in
that is also looks better.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inline io_link_cancel_timeout() and __io_kill_linked_timeout() into
io_kill_linked_timeout(). That allows to easily move a put of a cancelled
linked timeout out of completion_lock and to not deferring it. It is also
much more readable when not scattered across three different functions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move REQ_F_LINK_TIMEOUT clearing out of __io_kill_linked_timeout()
because it might return early and leave the flag set. It's not a
problem, but may be confusing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An armed linked timeout can never be a head of a link, so we don't need
to clear REQ_F_LINK_HEAD for it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_kill_linked_timeout() already checks for REQ_F_LTIMEOUT_ACTIVE and
it's set only for linked timeouts. No need to verify next request's
opcode.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Use iomap for non-journaled buffered I/O. This largely eliminates buffer
heads on filesystems where the block size matches the page size. Many thanks
to Christoph Hellwig for this patch!
* Fixes for some more journaled data filesystem bugs, found by running xfstests
with data journaling on for all files (chattr +j $MNT) (Bob Peterson).
* gfs2_evict_inode refactoring (Bob Peterson).
* Use the statfs data in the journal during recovery instead of reading it in
from the local statfs inodes (Abhi Das).
* Several other minor fixes by various people.
-----BEGIN PGP SIGNATURE-----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=C893
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Use iomap for non-journaled buffered I/O. This largely eliminates
buffer heads on filesystems where the block size matches the page
size. Many thanks to Christoph Hellwig for this patch!
- Fixes for some more journaled data filesystem bugs, found by running
xfstests with data journaling on for all files (chattr +j $MNT) (Bob
Peterson)
- gfs2_evict_inode refactoring (Bob Peterson)
- Use the statfs data in the journal during recovery instead of reading
it in from the local statfs inodes (Abhi Das)
- Several other minor fixes by various people
* tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (30 commits)
gfs2: Recover statfs info in journal head
gfs2: lookup local statfs inodes prior to journal recovery
gfs2: Add fields for statfs info in struct gfs2_log_header_host
gfs2: Ignore subsequent errors after withdraw in rgrp_go_sync
gfs2: Eliminate gl_vm
gfs2: Only access gl_delete for iopen glocks
gfs2: Fix comments to glock_hash_walk
gfs2: eliminate GLF_QUEUED flag in favor of list_empty(gl_holders)
gfs2: Ignore journal log writes for jdata holes
gfs2: simplify gfs2_block_map
gfs2: Only set PageChecked if we have a transaction
gfs2: don't lock sd_ail_lock in gfs2_releasepage
gfs2: make gfs2_ail1_empty_one return the count of active items
gfs2: Wipe jdata and ail1 in gfs2_journal_wipe, formerly gfs2_meta_wipe
gfs2: enhance log_blocks trace point to show log blocks free
gfs2: add missing log_blocks trace points in gfs2_write_revokes
gfs2: rename gfs2_write_full_page to gfs2_write_jdata_page, remove parm
gfs2: add validation checks for size of superblock
gfs2: use-after-free in sysfs deregistration
gfs2: Fix NULL pointer dereference in gfs2_rgrp_dump
...
-----BEGIN PGP SIGNATURE-----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=CqG0
-----END PGP SIGNATURE-----
Merge tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- add support for recognizing special file types (char/block/fifo/
symlink) for files created by Linux on WSL (a format we plan to move
to as the default for creating special files on Linux, as it has
advantages over the other current option, the SFU format) in readdir.
- fix double queries to root directory when directory leases not
supported (e.g. Samba)
- fix querying mode bits (modefromsid mount option) for special file
types
- stronger encryption (gcm256), disabled by default until tested more
broadly
- allow querying owner when server reports 'well known SID' on query
dir with SMB3.1.1 POSIX extensions
* tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (30 commits)
SMB3: add support for recognizing WSL reparse tags
cifs: remove bogus debug code
smb3.1.1: fix typo in compression flag
cifs: move smb version mount options into fs_context.c
cifs: move cache mount options to fs_context.ch
cifs: move security mount options into fs_context.ch
cifs: add files to host new mount api
smb3: do not try to cache root directory if dir leases not supported
smb3: fix stat when special device file and mounted with modefromsid
cifs: Print the address and port we are connecting to in generic_ip_connect()
SMB3: Resolve data corruption of TCP server info fields
cifs: make const array static, makes object smaller
SMB3.1.1: Fix ids returned in POSIX query dir
smb3: add dynamic trace point to trace when credits obtained
smb3.1.1: do not fail if no encryption required but server doesn't support it
cifs: Return the error from crypt_message when enc/dec key not found.
smb3.1.1: set gcm256 when requested
smb3.1.1: rename nonces used for GCM and CCM encryption
smb3.1.1: print warning if server does not support requested encryption type
smb3.1.1: add new module load parm enable_gcm_256
...
- Move the file range remap generic functions out of mm/filemap.c and
fs/read_write.c and into fs/remap_range.c to reduce clutter in the first
two files.
-----BEGIN PGP SIGNATURE-----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=DAPl
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull clone/dedupe/remap code refactoring from Darrick Wong:
"Move the generic file range remap (aka reflink and dedupe) functions
out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to
reduce clutter in the first two files"
* tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: move the generic write and copy checks out of mm
vfs: move the remap range helpers to remap_range.c
vfs: move generic_remap_checks out of mm
-----BEGIN PGP SIGNATURE-----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=aVWo
-----END PGP SIGNATURE-----
Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
Apply the outstanding statfs changes in the journal head to the
master statfs file. Zero out the local statfs file for good measure.
Previously, statfs updates would be read in from the local statfs inode and
synced to the master statfs inode during recovery.
We now use the statfs updates in the journal head to update the master statfs
inode instead of reading in from the local statfs inode. To preserve backward
compatibility with kernels that can't do this, we still need to keep the
local statfs inode up to date by writing changes to it. At some point in the
future, we can do away with the local statfs inodes altogether and keep the
statfs changes solely in the journal.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
