This commit implements vdpa_config_ops.get_vq_size for vDPA
simulator, this new interface can help report per vq size.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240202163905.8834-7-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit implements get_vq_size which report
per vq size in vdpa_config_ops
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240202163905.8834-6-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit implements vdpa_config_ops.get_vq_size in
vp_vdpa, which reports per virtqueue size.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240202163905.8834-5-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit implements vdpa_ops.get_vq_size to report
the size of a specific virtqueue.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240202163905.8834-4-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This addresses a couple of things found while testing the FLR and AER
handling with the VFs.
- release irqs before calling vp_modern_remove()
- make sure we have a valid struct pointer before using it to release irqs
- make sure the FW is alive before trying to add a new device
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20240220011050.30913-1-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit 295525e29a ("virtio_net: merge dma
operations when filling mergeable buffers"), VDUSE device
require support for DMA's .sync_single_for_cpu() operation
as the memory is non-coherent between the device and CPU
because of the use of a bounce buffer.
This patch implements both .sync_single_for_cpu() and
.sync_single_for_device() callbacks, and also skip bounce
buffer copies during DMA map and unmap operations if the
DMA_ATTR_SKIP_CPU_SYNC attribute is set to avoid extra
copies of the same buffer.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20240219170606.587290-1-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The MLX driver was not updating its control virtqueue size at set_vq_num
and instead always initialized to MLX5_CVQ_MAX_ENT (16) at
setup_cvq_vring.
Qemu would try to set the size to 64 by default, however, because the
CVQ size always was initialized to 16, an error would be thrown when
sending >16 control messages (as used-ring entry 17 is initialized to 0).
For example, starting a guest with x-svq=on and then executing the
following command would produce the error below:
# for i in {1..20}; do ifconfig eth0 hw ether XX:xx:XX:xx:XX:XX; done
qemu-system-x86_64: Insufficient written data (0)
[ 435.331223] virtio_net virtio0: Failed to set mac address by vq command.
SIOCSIFHWADDR: Invalid argument
Acked-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240216142502.78095-1-jonah.palmer@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Fixes: 5262912ef3 ("vdpa/mlx5: Add support for control VQ and MAC setting")
vdpasim_do_reset sets running to true, which is wrong, as it allows
vdpasim_kick_vq to post work requests before the device has been
configured. To fix, do not set running until VIRTIO_CONFIG_S_DRIVER_OK
is set.
Fixes: 0c89e2a3a9 ("vdpa_sim: Implement suspend vdpa op")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1707517807-137331-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vdpa/mlx5: support for resumable vqs
virtio_scsi: mq_poll support
3virtio_pmem: support SHMEM_REGION
virtio_balloon: stay awake while adjusting balloon
virtio: support for no-reset virtio PCI PM
Fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmWmgP8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpcfgH/0RD2S+NFY0ZEJz8BuI6GjykzYnyRW9iyxcw
epTLjPUcoEBttlw8TA+3PiPoNIJGfuU8Q4iKXJ8Jzql081tP9G1UxTIbj0v3Hx+q
0L2DUXfdAMYMLo5WQVl/PADV/10xLgExEh9jMqpU3IJIxVaLE/knD9ghRCDvDbs/
fOo3sSUGaNsSHYZs5bH73Q7cRKKmTLO+MzvHBbavFfz2fQ1b3vwecmJuQtAtK0JC
6JxH6Y38VfOl8jA6IHeEpGIHeF661HABkDDUh4UVEGOeyBl4E6ZcG4fjWSMinZ08
U3TbQLYOq10i8ki2LJKgoZHRv1HkxbM1Ogn0bsIh1hish8dPORM=
=RWjR
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vdpa/mlx5: support for resumable vqs
- virtio_scsi: mq_poll support
- 3virtio_pmem: support SHMEM_REGION
- virtio_balloon: stay awake while adjusting balloon
- virtio: support for no-reset virtio PCI PM
- Fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Add mkey leak detection
vdpa/mlx5: Introduce reference counting to mrs
vdpa/mlx5: Use vq suspend/resume during .set_map
vdpa/mlx5: Mark vq state for modification in hw vq
vdpa/mlx5: Mark vq addrs for modification in hw vq
vdpa/mlx5: Introduce per vq and device resume
vdpa/mlx5: Allow modifying multiple vq fields in one modify command
vdpa/mlx5: Expose resumable vq capability
vdpa: Block vq property changes in DRIVER_OK
vdpa: Track device suspended state
scsi: virtio_scsi: Add mq_poll support
virtio_pmem: support feature SHMEM_REGION
virtio_balloon: stay awake while adjusting balloon
vdpa: Remove usage of the deprecated ida_simple_xx() API
virtio: Add support for no-reset virtio PCI PM
virtio_net: fix missing dma unmap for resize
vhost-vdpa: account iommu allocations
vdpa: Fix an error handling path in eni_vdpa_probe()
Track allocated mrs in a list and show warning when leaks are detected
on device free or reset.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231225151203.152687-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Deleting the old mr during mr update (.set_map) and then modifying the
vqs with the new mr is not a good flow for firmware. The firmware
expects that mkeys are deleted after there are no more vqs referencing
them.
Introduce reference counting for mrs to fix this. It is the only way to
make sure that mkeys are not in use by vqs.
An mr reference is taken when the mr is associated to the mr asid table
and when the mr is linked to the vq on create/modify. The reference is
released when the mkey is unlinked from the vq (trough modify/destroy)
and from the mr asid table.
To make things consistent, get rid of mlx5_vdpa_destroy_mr and use
get/put semantics everywhere.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231225151203.152687-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of tearing down and setting up vq resources, use vq
suspend/resume during .set_map to speed things up a bit.
The vq mr is updated with the new mapping while the vqs are suspended.
If the device doesn't support resumable vqs, do the old teardown and
setup dance.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231225151203.152687-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.set_vq_state will set the indices and mark the fields to be modified in
the hw vq.
Advertise that the device supports changing the vq state when the device
is in DRIVER_OK state and suspended.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231225151203.152687-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Addresses get set by .set_vq_address. hw vq addresses will be updated on
next modify_virtqueue.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231225151203.152687-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement vdpa vq and device resume if capability detected. Add support
for suspend -> ready state change.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231225151203.152687-4-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a bitmask variable that tracks hw vq field changes that
are supposed to be modified on next hw vq change command.
This will be useful to set multiple vq fields when resuming the vq.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231225151203.152687-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUxRQAKCRCRxhvAZXjc
ov/QAQDzvge3oQ9MEymmOiyzzcF+HhAXBr+9oEsYJjFc1p0TsgEA61gXjZo7F1jY
KBqd6znOZCR+Waj0kIVJRAo/ISRBqQc=
=0bRl
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <d7534cc4caf4ff9d6b072744352c1b69487779ea.1702230703.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
After a successful vp_legacy_probe() call, vp_legacy_remove() should be
called in the error handling path, as already done in the remove function.
Add the missing call.
Fixes: e85087beed ("eni_vdpa: add vDPA driver for Alibaba ENI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <a7b0ef1eabd081f1c7c894e9b11de01678e85dee.1666293559.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Bring in the changes to the file infrastructure for this cycle. Mostly
cleanups and some performance tweaks.
* file: remove __receive_fd()
* file: stop exposing receive_fd_user()
* fs: replace f_rcuhead with f_task_work
* file: remove pointless wrapper
* file: s/close_fd_get_file()/file_close_fd()/g
* Improve __fget_files_rcu() code generation (and thus __fget_light())
* file: massage cleanup of files that failed to open
Signed-off-by: Christian Brauner <brauner@kernel.org>
Honestly, there's little value in having a helper with and without that
int __user *ufd argument. It's just messy and doesn't really give us
anything. Just expose receive_fd() with that argument and get rid of
that helper.
Link: https://lore.kernel.org/r/20231130-vfs-files-fixes-v1-5-e73ca6f4ea83@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix up the order that the device and negotiated features
are checked to get a more reliable difference when things
get changed.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
If the client driver is setting status to 0, something is
getting shutdown and possibly removed. Make sure we clear
the config_cb so that it doesn't end up crashing when
trying to call a bogus callback.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Our friendly kernel test robot has recently been pointing out
some format-truncation issues. Here's a fix for one of them.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311040109.RfgJoE7L-lkp@intel.com/
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
mlx5_vdpa does not preserve userland's view of vring base for the control
queue in the following sequence:
ioctl VHOST_SET_VRING_BASE
ioctl VHOST_VDPA_SET_STATUS VIRTIO_CONFIG_S_DRIVER_OK
mlx5_vdpa_set_status()
setup_cvq_vring()
vringh_init_iotlb()
vringh_init_kern()
vrh->last_avail_idx = 0;
ioctl VHOST_GET_VRING_BASE
To fix, restore the value of cvq->vring.last_avail_idx after calling
vringh_init_iotlb.
Fixes: 5262912ef3 ("vdpa/mlx5: Add support for control VQ and MAC setting")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1699014387-194368-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ever since the eventfd type was introduced back in 2007 in commit
e1ad7468c7 ("signal/timer/event: eventfd core") the eventfd_signal()
function only ever passed 1 as a value for @n. There's no point in
keeping that additional argument.
Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-2-bd549b14ce0c@kernel.org
Acked-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Acked-by: Eric Farman <farman@linux.ibm.com> # s390
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Deleting and recreating a device can lead to having the same
content as the old device, so let's always allocate buffers
completely zeroed out.
Fixes: abebb16254 ("vdpa_sim_blk: support shared backend")
Suggested-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20231031144339.121453-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
In order to reduce excessive memory mapping cost in live migration and
VM reboot, it is desirable to decouple the vhost-vdpa IOTLB abstraction
from the virtio device life cycle, i.e. mappings can be kept intact
across virtio device reset. Leverage the .reset_map callback, which is
meant to destroy the iotlb on the given ASID and recreate the 1:1
passthrough/identity mapping. To be consistent, the mapping on device
creation is initiailized to passthrough/identity with PA 1:1 mapped as
IOVA. With this the device .reset op doesn't have to maintain and clean
up memory mappings by itself.
Additionally, implement .compat_reset to cater for older userspace,
which may wish to see mapping to be cleared during reset.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <1697880319-4937-8-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Since commit 6f5312f801 ("vdpa/mlx5: Add support for running with
virtio_vdpa"), mlx5_vdpa starts with preallocate 1:1 DMA MR at device
creation time. This 1:1 DMA MR will be implicitly destroyed while the
first .set_map call is invoked, in which case callers like vhost-vdpa
will start to set up custom mappings. When the .reset callback is
invoked, the custom mappings will be cleared and the 1:1 DMA MR will be
re-created.
In order to reduce excessive memory mapping cost in live migration, it
is desirable to decouple the vhost-vdpa IOTLB abstraction from the
virtio device life cycle, i.e. mappings can be kept around intact across
virtio device reset. Leverage the .reset_map callback, which is meant to
destroy the regular MR (including cvq mapping) on the given ASID and
recreate the initial DMA mapping. That way, the device .reset op runs
free from having to maintain and clean up memory mappings by itself.
Additionally, implement .compat_reset to cater for older userspace,
which may wish to see mapping to be cleared during reset.
Co-developed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1697880319-4937-7-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Now that the driver core allows for struct class to be in read-only
memory, we should make all 'class' structures declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at runtime.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <2023100643-tricolor-citizen-6c2d@gregkh>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Offer this backend feature as mlx5 is compatible with it. It allows it
to do live migration with CVQ, dynamically switching between passthrough
and shadow virtqueue.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230703142514.363256-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For the following sequence:
- cvq group is in ASID 0
- .set_map(1, cvq_iotlb)
- .set_group_asid(cvq_group, 1)
... the cvq mapping from ASID 0 will be used. This is not always correct
behaviour.
This patch adds support for the above mentioned flow by saving the iotlb
on each .set_map and updating the cvq iotlb with it on a cvq group change.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-18-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
They will be used in a follow-up patch.
For dup_iotlb, avoid the src == dst case. This is an error.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-17-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Vq descriptor mappings are supported in hardware by filling in an
additional mkey which contains the descriptor mappings to the hw vq.
A previous patch in this series added support for hw mkey (mr) creation
for ASID 1.
This patch fills in both the vq data and vq descriptor mkeys based on
group ASID mapping.
The feature is signaled to the vdpa core through the presence of the
.get_vq_desc_group op.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-16-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Introduce the vq descriptor group and mr per ASID. Until now
.set_map on ASID 1 was only updating the cvq iotlb. From now on it also
creates a mkey for it. The current patch doesn't use it but follow-up
patches will add hardware support for mapping the vq descriptors.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-15-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
The current flow for updating an mr works directly on mvdev->mr which
makes it cumbersome to handle multiple new mr structs.
This patch makes the flow more straightforward by having
mlx5_vdpa_create_mr return a new mr which will update the old mr (if
any). The old mr will be deleted and unlinked from mvdev. For the case
when the iotlb is empty (not NULL), the old mr will be cleared.
This change paves the way for adding mrs for different ASIDs.
The initialized bool is no longer needed as mr is now a pointer in the
mlx5_vdpa_dev struct which will be NULL when not initialized.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-14-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
The mutex is named like it is supposed to protect only the mkey but in
reality it is a global lock for all mr resources.
Shift the mutex to it's rightful location (struct mlx5_vdpa_dev) and
give it a more appropriate name.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-13-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
This patch adapts the mr creation/deletion code to be able to work with
any given mr struct pointer. All the APIs are adapted to take an extra
parameter for the mr.
mlx5_vdpa_create/delete_mr doesn't need a ASID parameter anymore. The
check is done in the caller instead (mlx5_set_map).
This change is needed for a followup patch which will introduce an
additional mr for the vq descriptor data.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-12-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Make mlx5_destroy_mr symmetric to mlx5_create_mr.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-11-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Now that the cvq code is out of mlx5_vdpa_create/destroy_mr, the "dvq"
functions can be folded into their callers.
Having "dvq" in the naming will no longer be accurate in the downstream
patches.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-10-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
The reslock is taken while refresh is called but iommu_lock is more
specific to this resource. So take the iommu_lock during cvq iotlb
refresh.
Based on Eugenio's patch [0].
[0] https://lore.kernel.org/lkml/20230112142218.725622-4-eperezma@redhat.com/
Acked-by: Jason Wang <jasowang@redhat.com>
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
The handling of the cvq iotlb is currently coupled with the creation
and destruction of the hardware mkeys (mr).
This patch moves cvq iotlb handling into its own function and shifts it
to a scope that is not related to mr handling. As cvq handling is just a
prune_iotlb + dup_iotlb cycle, put it all in the same "update" function.
Finally, the destruction path is handled by directly pruning the iotlb.
After this move is done the ASID mr code can be collapsed into a single
function.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Necessary for upcoming cvq separation from mr allocation.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231018171456.1624030-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
A firmware error is triggered when configuring a 9k MTU on the PF after
switching to switchdev mode and then using a vdpa device with larger
(1k) rings:
mlx5_cmd_out_err: CREATE_GENERAL_OBJECT(0xa00) op_mod(0xd) failed, status bad resource(0x5), syndrome (0xf6db90), err(-22)
This is due to the fact that the hw VQ size parameters are computed
based on the umem_1/2/3_buffer_param_a/b capabilities and all
device capabilities are read only when the driver is moved to switchdev mode.
The problematic configuration flow looks like this:
1) Create VF
2) Unbind VF
3) Switch PF to switchdev mode.
4) Bind VF
5) Set PF MTU to 9k
6) create vDPA device
7) Start VM with vDPA device and 1K queue size
Note that setting the MTU before step 3) doesn't trigger this issue.
This patch reads the forementioned umem parameters at the latest point
possible before the VQs of the device are created.
v2:
- Allocate output with kmalloc to reduce stack frame size.
- Removed stable from cc.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20230831155702.1080754-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The error path in setup_driver deletes the debugfs entry but doesn't
clear the pointer. During .dev_del the invalid pointer will be released
again causing a crash.
This patch fixes the issue by always clearing the debugfs entry in
mlx5_vdpa_remove_debugfs. Also, stop removing the debugfs entry in
.dev_del op: the debugfs entry is already handled within the
setup_driver/teardown_driver scope.
Cc: stable@vger.kernel.org
Fixes: f0417e72ad ("vdpa/mlx5: Add and remove debugfs in setup/teardown driver")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Message-Id: <20230829174014.928189-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
If the shared_buffer allocation fails, need to unregister mgmt_dev first.
Cc: stable@vger.kernel.org
Fixes: abebb16254 ("vdpa_sim_blk: support shared backend")
Signed-off-by: Shawn.Shao <shawn.shao@jaguarmicro.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230821060333.1155-1-shawn.shao@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
a small pull request this time around, mostly because the
vduse network got postponed to next relase so we can be sure
we got the security store right.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmT1BMAPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpYJUH+QHNhfn0JC/yE1IySwDwpmdgr73aaGik1LgV
ObHi48ucRMtxB+QpXLjPWAlQhVVzZv1wBK+Up9QxW8e9USJrSeI/MWfoHtXOFnGe
1JdmNr+XQM/uDngZ+mjI4ZUwRkA61iOcTR7gEDdfBUOr+Yl6R7Na/+kKtTDiDMfy
O8bOCLYVyJNiny2eSMmXH0mb4oPplkne4PzW4i/+ssKNoHlBmUIcx0jqj/qUVpSR
ozr0SpyhlXKSEQGAtNxwR4PONeMDOOdkRBhxHW5N5QgnP9P7HQ57Ar39Vz7+Kc0i
6vO2g1gpYV1naQr9BCg8hIF9r68rjgi4IOSghmfpWWUL0yNURtU=
=z/Df
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"A small pull request this time around, mostly because the vduse
network got postponed to next relase so we can be sure we got the
security store right"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_ring: fix avail_wrap_counter in virtqueue_add_packed
virtio_vdpa: build affinity masks conditionally
virtio_net: merge dma operations when filling mergeable buffers
virtio_ring: introduce dma sync api for virtqueue
virtio_ring: introduce dma map api for virtqueue
virtio_ring: introduce virtqueue_reset()
virtio_ring: separate the logic of reset/enable from virtqueue_resize
virtio_ring: correct the expression of the description of virtqueue_resize()
virtio_ring: skip unmap for premapped
virtio_ring: introduce virtqueue_dma_dev()
virtio_ring: support add premapped buf
virtio_ring: introduce virtqueue_set_dma_premapped()
virtio_ring: put mapping error check in vring_map_one_sg
virtio_ring: check use_dma_api before unmap desc for indirect
vdpa_sim: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
vdpa: add get_backend_features vdpa operation
vdpa: accept VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK backend feature
vdpa: add VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK flag
vdpa/mlx5: Remove unused function declarations
Start offering the feature in the simulator. Other parent drivers can
follow this code to offer it too.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-5-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 29064bfdab ("vdpa/mlx5: Add support library for mlx5 VDPA implementation")
declared but never implemented these.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Message-Id: <20230803143041.23388-1-yuehaibing@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e1949 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88a ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
