Return the value kimage_add_entry() directly instead of storing it in
another redundant variable.
Link: https://lkml.kernel.org/r/20220929042936.22012-3-bhe@redhat.com
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Lifu <chenlifu@huawei.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jianglei Nie <niejianglei2021@163.com>
Cc: Li Chen <lchen@ambarella.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
Since its use in kexec_core.c is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in kexec_core.c.
Tested on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
Link: https://lkml.kernel.org/r/20220821182519.9483-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Attempting to get a crash dump out of a debug PREEMPT_RT kernel via an NMI
panic() doesn't work. The cause of that lies in the PREEMPT_RT definition
of mutex_trylock():
if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEXES) && WARN_ON_ONCE(!in_task()))
return 0;
This prevents an nmi_panic() from executing the main body of
__crash_kexec() which does the actual kexec into the kdump kernel. The
warning and return are explained by:
6ce47fd961 ("rtmutex: Warn if trylock is called from hard/softirq context")
[...]
The reasons for this are:
1) There is a potential deadlock in the slowpath
2) Another cpu which blocks on the rtmutex will boost the task
which allegedly locked the rtmutex, but that cannot work
because the hard/softirq context borrows the task context.
Furthermore, grabbing the lock isn't NMI safe, so do away with kexec_mutex
and replace it with an atomic variable. This is somewhat overzealous as
*some* callsites could keep using a mutex (e.g. the sysfs-facing ones
like crash_shrink_memory()), but this has the benefit of involving a
single unified lock and preventing any future NMI-related surprises.
Tested by triggering NMI panics via:
$ echo 1 > /proc/sys/kernel/panic_on_unrecovered_nmi
$ echo 1 > /proc/sys/kernel/unknown_nmi_panic
$ echo 1 > /proc/sys/kernel/panic
$ ipmitool power diag
Link: https://lkml.kernel.org/r/20220630223258.4144112-3-vschneid@redhat.com
Fixes: 6ce47fd961 ("rtmutex: Warn if trylock is called from hard/softirq context")
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kexec, panic: Making crash_kexec() NMI safe", v4.
This patch (of 2):
Most acquistions of kexec_mutex are done via mutex_trylock() - those were
a direct "translation" from:
8c5a1cf0ad ("kexec: use a mutex for locking rather than xchg()")
there have however been two additions since then that use mutex_lock():
crash_get_memory_size() and crash_shrink_memory().
A later commit will replace said mutex with an atomic variable, and
locking operations will become atomic_cmpxchg(). Rather than having those
mutex_lock() become while (atomic_cmpxchg(&lock, 0, 1)), turn them into
trylocks that can return -EBUSY on acquisition failure.
This does halve the printable size of the crash kernel, but that's still
neighbouring 2G for 32bit kernels which should be ample enough.
Link: https://lkml.kernel.org/r/20220630223258.4144112-1-vschneid@redhat.com
Link: https://lkml.kernel.org/r/20220630223258.4144112-2-vschneid@redhat.com
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
subsystems. Most notably some maintenance work in ocfs2 and initramfs.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo/6xQAKCRDdBJ7gKXxA
jkD9AQCPczLBbRWpe1edL+5VHvel9ePoHQmvbHQnufdTh9rB5QEAu0Uilxz4q9cx
xSZypNhj2n9f8FCYca/ZrZneBsTnAA8=
=AJEO
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"The non-MM patch queue for this merge window.
Not a lot of material this cycle. Many singleton patches against
various subsystems. Most notably some maintenance work in ocfs2
and initramfs"
* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
kcov: update pos before writing pc in trace function
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
fs/ntfs: remove redundant variable idx
fat: remove time truncations in vfat_create/vfat_mkdir
fat: report creation time in statx
fat: ignore ctime updates, and keep ctime identical to mtime in memory
fat: split fat_truncate_time() into separate functions
MAINTAINERS: add Muchun as a memcg reviewer
proc/sysctl: make protected_* world readable
ia64: mca: drop redundant spinlock initialization
tty: fix deadlock caused by calling printk() under tty_port->lock
relay: remove redundant assignment to pointer buf
fs/ntfs3: validate BOOT sectors_per_clusters
lib/string_helpers: fix not adding strarray to device's resource list
kernel/crash_core.c: remove redundant check of ck_cmdline
ELF, uapi: fixup ELF_ST_TYPE definition
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
ipc: update semtimedop() to use hrtimer
ipc/sem: remove redundant assignments
...
For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and
all this caused merge conflicts with one susbystem or another.
This tree was put together to help try to avoid conflicts with these cleanups
going on different trees at time. So nothing exciting on this pull request,
just cleanups.
I actually had this sysctl-next tree up since v5.18 but I missed sending a
pull request for it on time during the last merge window. And so these changes
have been being soaking up on sysctl-next and so linux-next for a while.
The last change was merged May 4th.
Most of the compile issues were reported by 0day and fixed.
To help avoid a conflict with bpf folks at Daniel Borkmann's request
I merged bpf-next/pr/bpf-sysctl into sysctl-next to get the effor which
moves the BPF sysctls from kernel/sysctl.c to BPF core.
Possible merge conflicts and known resolutions as per linux-next:
bfp:
https://lkml.kernel.org/r/20220414112812.652190b5@canb.auug.org.au
rcu:
https://lkml.kernel.org/r/20220420153746.4790d532@canb.auug.org.au
powerpc:
https://lkml.kernel.org/r/20220520154055.7f964b76@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----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=btwh
-----END PGP SIGNATURE-----
Merge tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of
#ifdefs and all this caused merge conflicts with one susbystem or
another.
This tree was put together to help try to avoid conflicts with these
cleanups going on different trees at time. So nothing exciting on this
pull request, just cleanups.
Thanks a lot to the Uniontech and Huawei folks for doing some of this
nasty work"
* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
sched: Fix build warning without CONFIG_SYSCTL
reboot: Fix build warning without CONFIG_SYSCTL
kernel/kexec_core: move kexec_core sysctls into its own file
sysctl: minor cleanup in new_dir()
ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
fs/proc: Introduce list_for_each_table_entry for proc sysctl
mm: fix unused variable kernel warning when SYSCTL=n
latencytop: move sysctl to its own file
ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
ftrace: Fix build warning
ftrace: move sysctl_ftrace_enabled to ftrace.c
kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/delayacct: move delayacct sysctls to its own file
kernel/acct: move acct sysctls to its own file
kernel/panic: move panic sysctls to its own file
kernel/lockdep: move lockdep sysctls to its own file
mm: move page-writeback sysctls to their own file
mm: move oom_kill sysctls to their own file
kernel/reboot: move reboot sysctls to its own file
sched: Move energy_aware sysctls to topology.c
...
Get rid of redundant assignments which end up in values not being read
either because they are overwritten or the function ends.
Reported by clang-tidy [deadcode.DeadStores]
Link: https://lkml.kernel.org/r/20220326180948.192154-1-michalorzel.eng@gmail.com
Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Michal Orzel <michalorzel.eng@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This move the kernel/kexec_core.c respective sysctls to its own file.
kernel/sysctl.c has grown to an insane mess, We move sysctls to places
where features actually belong to improve the readability and reduce
merge conflicts. At the same time, the proc-sysctl maintainers can easily
care about the core logic other than the sysctl knobs added for some feature.
We already moved all filesystem sysctls out. This patch is part of the effort
to move kexec related sysctls out.
Signed-off-by: yingelin <yingelin@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
x86-32 was the last architecture that implemented separate user and
kernel registers.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220325153953.162643-3-brgerst@gmail.com
The beginning of do_exit has become cluttered and difficult to read as
it is filled with checks to handle things that can only happen when
the kernel is operating improperly.
Now that we have a dedicated function for cleaning up a task when the
kernel is operating improperly move the checks there.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
With @logbuf_lock removed, the high level printk functions for
storing messages are lockless. Messages can be stored from any
context, so there is no need for the NMI and safe buffers anymore.
Remove the NMI and safe buffers.
Although the safe buffers are removed, the NMI and safe context
tracking is still in place. In these contexts, store the message
immediately but still use irq_work to defer the console printing.
Since printk recursion tracking is in place, safe context tracking
for most of printk is not needed. Remove it. Only safe context
tracking relating to the console and console_owner locks is left
in place. This is because the console and console_owner locks are
needed for the actual printing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-4-john.ogness@linutronix.de
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmsg_dump(KMSG_DUMP_SHUTDOWN) is called before machine_restart(),
machine_halt(), and machine_power_off(). The only one that is missing
is machine_kexec().
The dmesg output that it contains can be used to study the shutdown
performance of both kernel and systemd during kexec reboot.
Here is example of dmesg data collected after kexec:
root@dplat-cp22:~# cat /sys/fs/pstore/dmesg-ramoops-0 | tail
...
[ 70.914592] psci: CPU3 killed (polled 0 ms)
[ 70.915705] CPU4: shutdown
[ 70.916643] psci: CPU4 killed (polled 4 ms)
[ 70.917715] CPU5: shutdown
[ 70.918725] psci: CPU5 killed (polled 0 ms)
[ 70.919704] CPU6: shutdown
[ 70.920726] psci: CPU6 killed (polled 4 ms)
[ 70.921642] CPU7: shutdown
[ 70.922650] psci: CPU7 killed (polled 0 ms)
Link: https://lkml.kernel.org/r/20210319192326.146000-2-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: James Morris <jmorris@namei.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The purpose is to notify the kernel module for fast reboot.
Upstream a patch from the SONiC network operating system [1].
[1]: https://github.com/Azure/sonic-linux-kernel/pull/46
Link: https://lkml.kernel.org/r/20210304124626.13927-1-pmenzel@molgen.mpg.de
Signed-off-by: Joe LeVeque <jolevequ@microsoft.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Guohan Lu <lguohan@gmail.com>
Cc: Joe LeVeque <jolevequ@microsoft.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ELF compat updates from Al Viro:
"Sanitizing ELF compat support, especially for triarch architectures:
- X32 handling cleaned up
- MIPS64 uses compat_binfmt_elf.c both for O32 and N32 now
- Kconfig side of things regularized
Eventually I hope to have compat_binfmt_elf.c killed, with both native
and compat built from fs/binfmt_elf.c, with -DELF_BITS={64,32} passed
by kbuild, but that's a separate story - not included here"
* 'work.elf-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
get rid of COMPAT_ELF_EXEC_PAGESIZE
compat_binfmt_elf: don't bother with undef of ELF_ARCH
Kconfig: regularize selection of CONFIG_BINFMT_ELF
mips compat: switch to compat_binfmt_elf.c
mips: don't bother with ELF_CORE_EFLAGS
mips compat: don't bother with ELF_ET_DYN_BASE
mips: KVM_GUEST makes no sense for 64bit builds...
mips: kill unused definitions in binfmt_elf[on]32.c
mips binfmt_elf*32.c: use elfcore-compat.h
x32: make X32, !IA32_EMULATION setups able to execute x32 binaries
[amd64] clean PRSTATUS_SIZE/SET_PR_FPVALID up properly
elf_prstatus: collect the common part (everything before pr_reg) into a struct
binfmt_elf: partially sanitize PRSTATUS_SIZE and SET_PR_FPVALID
Function kernel_kexec() is called with lock system_transition_mutex
held in reboot system call. While inside kernel_kexec(), it will
acquire system_transition_mutex agin. This will lead to dead lock.
The dead lock should be easily triggered, it hasn't caused any
failure report just because the feature 'kexec jump' is almost not
used by anyone as far as I know. An inquiry can be made about who
is using 'kexec jump' and where it's used. Before that, let's simply
remove the lock operation inside CONFIG_KEXEC_JUMP ifdeffery scope.
Fixes: 55f2503c3b ("PM / reboot: Eliminate race between reboot and suspend")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pingfan Liu <kernelfans@gmail.com>
Cc: 4.19+ <stable@vger.kernel.org> # 4.19+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Preparations to doing i386 compat elf_prstatus sanely - rather than duplicating
the beginning of compat_elf_prstatus, take these fields into a separate
structure (compat_elf_prstatus_common), so that it could be reused. Due to
the incestous relationship between binfmt_elf.c and compat_binfmt_elf.c we
need the same shape change done to native struct elf_prstatus, gathering the
fields prior to pr_reg into a new structure (struct elf_prstatus_common).
Fortunately, offset of pr_reg is always a multiple of 16 with no padding
right before it, so it's possible to turn all the stuff prior to it into
a single member without disturbing the layout.
[build fix from Geert Uytterhoeven folded in]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix multiple occurrences of duplicated words in kernel/.
Fix one typo/spello on the same line as a duplicate word. Change one
instance of "the the" to "that the". Otherwise just drop one of the
repeated words.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/98202fa6-8919-ef63-9efe-c0fad5ca7af1@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Header frame.h is getting more code annotations to help objtool analyze
object files.
Rename the file to objtool.h.
[ jpoimboe: add objtool.h to MAINTAINERS ]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
It is the same as machine_kexec_prepare(), but is called after segments are
loaded. This way, can do processing work with already loaded relocation
segments. One such example is arm64: it has to have segments loaded in
order to create a page table, but it cannot do it during kexec time,
because at that time allocations won't be possible anymore.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Here is a regular kexec command sequence and output:
=====
$ kexec --reuse-cmdline -i --load Image
$ kexec -e
[ 161.342002] kexec_core: Starting new kernel
Welcome to Buildroot
buildroot login:
=====
Even when "quiet" kernel parameter is specified, "kexec_core: Starting
new kernel" is printed.
This message has KERN_EMERG level, but there is no emergency, it is a
normal kexec operation, so quiet it down to appropriate KERN_NOTICE.
Machines that have slow console baud rate benefit from less output.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
syzbot found that a thread can stall for minutes inside kexec_load() after
that thread was killed by SIGKILL [1]. It turned out that the reproducer
was trying to allocate 2408MB of memory using kimage_alloc_page() from
kimage_load_normal_segment(). Let's check for SIGKILL before doing memory
allocation.
[1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e
Link: http://lkml.kernel.org/r/993c9185-d324-2640-d061-bed2dd18b1f7@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on 2 normalized pattern(s):
this source code is licensed under the gnu general public license
version 2 see the file copying for more details
this source code is licensed under general public license version 2
see
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 52 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a function to disable secondary CPUs for suspend that are
not necessarily non-zero / non-boot CPUs. Platforms will be able to
use this to suspend using non-zero CPUs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20190411033448.20842-3-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
totalram_pages and totalhigh_pages are made static inline function.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: convert totalram_pages, totalhigh_pages and managed
pages to atomic", v5.
This series converts totalram_pages, totalhigh_pages and
zone->managed_pages to atomic variables.
totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 It seemes better
to remove the lock and convert variables to atomic. With the change,
preventing poteintial store-to-read tearing comes as a bonus.
This patch (of 4):
This is in preparation to a later patch which converts totalram_pages and
zone->managed_pages to atomic variables. Please note that re-reading the
value might lead to a different value and as such it could lead to
unexpected behavior. There are no known bugs as a result of the current
code but it is better to prevent from them in principle.
Link: http://lkml.kernel.org/r/1542090790-21750-2-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Without yielding while loading kimage segments, a large initrd will
block all other work on the CPU performing the load until it is
completed. For example loading an initrd of 200MB on a low power single
core system will lock up the system for a few seconds.
To increase system responsiveness to other tasks at that time, call
cond_resched() in both the crash kernel and normal kernel segment
loading loops.
I did run into a practical problem. Hardware watchdogs on embedded
systems can have short timers on the order of seconds. If the system is
locked up for a few seconds with only a single core available, the
watchdog may not be pet in a timely fashion. If this happens, the
hardware watchdog will fire and reset the system.
This really only becomes a problem when you are working with a single
core, a decently sized initrd, and have a constrained hardware watchdog.
Link: http://lkml.kernel.org/r/1528738546-3328-1-git-send-email-jmf@amazon.com
Signed-off-by: Jarrett Farnitano <jmf@amazon.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide support so that kexec can be used to boot a kernel when SME is
enabled.
Support is needed to allocate pages for kexec without encryption. This
is needed in order to be able to reboot in the kernel in the same manner
as originally booted.
Additionally, when shutting down all of the CPUs we need to be sure to
flush the caches and then halt. This is needed when booting from a state
where SME was not active into a state where SME is active (or vice-versa).
Without these steps, it is possible for cache lines to exist for the same
physical location but tagged both with and without the encryption bit. This
can cause random memory corruption when caches are flushed depending on
which cacheline is written last.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: <kexec@lists.infradead.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Toshimitsu Kani <toshi.kani@hpe.com>
Cc: kasan-dev@googlegroups.com
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/b95ff075db3e7cd545313f2fb609a49619a09625.1500319216.git.thomas.lendacky@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently vmcoreinfo data is updated at boot time subsys_initcall(), it
has the risk of being modified by some wrong code during system is
running.
As a result, vmcore dumped may contain the wrong vmcoreinfo. Later on,
when using "crash", "makedumpfile", etc utility to parse this vmcore, we
probably will get "Segmentation fault" or other unexpected errors.
E.g. 1) wrong code overwrites vmcoreinfo_data; 2) further crashes the
system; 3) trigger kdump, then we obviously will fail to recognize the
crash context correctly due to the corrupted vmcoreinfo.
Now except for vmcoreinfo, all the crash data is well
protected(including the cpu note which is fully updated in the crash
path, thus its correctness is guaranteed). Given that vmcoreinfo data
is a large chunk prepared for kdump, we better protect it as well.
To solve this, we relocate and copy vmcoreinfo_data to the crash memory
when kdump is loading via kexec syscalls. Because the whole crash
memory will be protected by existing arch_kexec_protect_crashkres()
mechanism, we naturally protect vmcoreinfo_data from write(even read)
access under kernel direct mapping after kdump is loaded.
Since kdump is usually loaded at the very early stage after boot, we can
trust the correctness of the vmcoreinfo data copied.
On the other hand, we still need to operate the vmcoreinfo safe copy
when crash happens to generate vmcoreinfo_note again, we rely on vmap()
to map out a new kernel virtual address and update to use this new one
instead in the following crash_save_vmcoreinfo().
BTW, we do not touch vmcoreinfo_note, because it will be fully updated
using the protected vmcoreinfo_data after crash which is surely correct
just like the cpu crash note.
Link: http://lkml.kernel.org/r/1493281021-20737-3-git-send-email-xlpang@redhat.com
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for an objtool rewrite which will have broader checks,
whitelist functions and files which cause problems because they do
unusual things with the stack.
These whitelists serve as a TODO list for which functions and files
don't yet have undwarf unwinder coverage. Eventually most of the
whitelists can be removed in favor of manual CFI hint annotations or
objtool improvements.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/7f934a5d707a574bda33ea282e9478e627fb1829.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Get rid of multiple definitions of append_elf_note() & final_note()
functions. Reuse these functions compiled under CONFIG_CRASH_CORE Also,
define Elf_Word and use it instead of generic u32 or the more specific
Elf64_Word.
Link: http://lkml.kernel.org/r/149035342324.6881.11667840929850361402.stgit@hbathini.in.ibm.com
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kexec/fadump: remove dependency with CONFIG_KEXEC and
reuse crashkernel parameter for fadump", v4.
Traditionally, kdump is used to save vmcore in case of a crash. Some
architectures like powerpc can save vmcore using architecture specific
support instead of kexec/kdump mechanism. Such architecture specific
support also needs to reserve memory, to be used by dump capture kernel.
crashkernel parameter can be a reused, for memory reservation, by such
architecture specific infrastructure.
This patchset removes dependency with CONFIG_KEXEC for crashkernel
parameter and vmcoreinfo related code as it can be reused without kexec
support. Also, crashkernel parameter is reused instead of
fadump_reserve_mem to reserve memory for fadump.
The first patch moves crashkernel parameter parsing and vmcoreinfo
related code under CONFIG_CRASH_CORE instead of CONFIG_KEXEC_CORE. The
second patch reuses the definitions of append_elf_note() & final_note()
functions under CONFIG_CRASH_CORE in IA64 arch code. The third patch
removes dependency on CONFIG_KEXEC for firmware-assisted dump (fadump)
in powerpc. The next patch reuses crashkernel parameter for reserving
memory for fadump, instead of the fadump_reserve_mem parameter. This
has the advantage of using all syntaxes crashkernel parameter supports,
for fadump as well. The last patch updates fadump kernel documentation
about use of crashkernel parameter.
This patch (of 5):
Traditionally, kdump is used to save vmcore in case of a crash. Some
architectures like powerpc can save vmcore using architecture specific
support instead of kexec/kdump mechanism. Such architecture specific
support also needs to reserve memory, to be used by dump capture kernel.
crashkernel parameter can be a reused, for memory reservation, by such
architecture specific infrastructure.
But currently, code related to vmcoreinfo and parsing of crashkernel
parameter is built under CONFIG_KEXEC_CORE. This patch introduces
CONFIG_CRASH_CORE and moves the above mentioned code under this config,
allowing code reuse without dependency on CONFIG_KEXEC. There is no
functional change with this patch.
Link: http://lkml.kernel.org/r/149035338104.6881.4550894432615189948.stgit@hbathini.in.ibm.com
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull printk updates from Petr Mladek:
- Add Petr Mladek, Sergey Senozhatsky as printk maintainers, and Steven
Rostedt as the printk reviewer. This idea came up after the
discussion about printk issues at Kernel Summit. It was formulated
and discussed at lkml[1].
- Extend a lock-less NMI per-cpu buffers idea to handle recursive
printk() calls by Sergey Senozhatsky[2]. It is the first step in
sanitizing printk as discussed at Kernel Summit.
The change allows to see messages that would normally get ignored or
would cause a deadlock.
Also it allows to enable lockdep in printk(). This already paid off.
The testing in linux-next helped to discover two old problems that
were hidden before[3][4].
- Remove unused parameter by Sergey Senozhatsky. Clean up after a past
change.
[1] http://lkml.kernel.org/r/1481798878-31898-1-git-send-email-pmladek@suse.com
[2] http://lkml.kernel.org/r/20161227141611.940-1-sergey.senozhatsky@gmail.com
[3] http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com
[4] http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: drop call_console_drivers() unused param
printk: convert the rest to printk-safe
printk: remove zap_locks() function
printk: use printk_safe buffers in printk
printk: report lost messages in printk safe/nmi contexts
printk: always use deferred printk when flush printk_safe lines
printk: introduce per-cpu safe_print seq buffer
printk: rename nmi.c and exported api
printk: use vprintk_func in vprintk()
MAINTAINERS: Add printk maintainers
A preparation patch for printk_safe work. No functional change.
- rename nmi.c to print_safe.c
- add `printk_safe' prefix to some (which used both by printk-safe
and printk-nmi) of the exported functions.
Link: http://lkml.kernel.org/r/20161227141611.940-3-sergey.senozhatsky@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Calvin Owens <calvinowens@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
__pa_symbol is the correct api to get the physical address of kernel
symbols. Switch to it to allow for better debug checking.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
A soft lookup will occur when I run trinity in syscall kexec_load. the
corresponding stack information is as follows.
BUG: soft lockup - CPU#6 stuck for 22s! [trinity-c6:13859]
Kernel panic - not syncing: softlockup: hung tasks
CPU: 6 PID: 13859 Comm: trinity-c6 Tainted: G O L ----V------- 3.10.0-327.28.3.35.zhongjiang.x86_64 #1
Hardware name: Huawei Technologies Co., Ltd. Tecal BH622 V2/BC01SRSA0, BIOS RMIBV386 06/30/2014
Call Trace:
<IRQ> dump_stack+0x19/0x1b
panic+0xd8/0x214
watchdog_timer_fn+0x1cc/0x1e0
__hrtimer_run_queues+0xd2/0x260
hrtimer_interrupt+0xb0/0x1e0
? call_softirq+0x1c/0x30
local_apic_timer_interrupt+0x37/0x60
smp_apic_timer_interrupt+0x3f/0x60
apic_timer_interrupt+0x6d/0x80
<EOI> ? kimage_alloc_control_pages+0x80/0x270
? kmem_cache_alloc_trace+0x1ce/0x1f0
? do_kimage_alloc_init+0x1f/0x90
kimage_alloc_init+0x12a/0x180
SyS_kexec_load+0x20a/0x260
system_call_fastpath+0x16/0x1b
the first time allocation of control pages may take too much time
because crash_res.end can be set to a higher value. we need to add
cond_resched to avoid the issue.
The patch have been tested and above issue is not appear.
Link: http://lkml.kernel.org/r/1481164674-42775-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Xunlei Pang <xpang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently in x86_64, the symbol address of phys_base is exported to
vmcoreinfo. Dave Anderson complained this is really useless for his
Crash implementation. Because in user-space utility Crash and
Makedumpfile which exported vmcore information is mainly used for, value
of phys_base is needed to covert virtual address of exported kernel
symbol to physical address. Especially init_level4_pgt, if we want to
access and go over the page table to look up a PA corresponding to VA,
firstly we need calculate
page_dir = SYMBOL(init_level4_pgt) - __START_KERNEL_map + phys_base;
Now in Crash and Makedumpfile, we have to analyze the vmcore elf program
header to get value of phys_base. As Dave said, it would be preferable
if it were readily availabl in vmcoreinfo rather than depending upon the
PT_LOAD semantics.
Hence in this patch change to export the value of phys_base instead of
its virtual address.
And people also complained that KERNEL_IMAGE_SIZE exporting is x86_64
only, should be moved into arch dependent function
arch_crash_save_vmcoreinfo. Do the moving in this patch.
Link: http://lkml.kernel.org/r/1478568596-30060-2-git-send-email-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Xunlei Pang <xlpang@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Eugene Surovegin <surovegin@google.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I hit the following issue when run trinity in my system. The kernel is
3.4 version, but mainline has the same issue.
The root cause is that the segment size is too large so the kerenl
spends too long trying to allocate a page. Other cases will block until
the test case quits. Also, OOM conditions will occur.
Call Trace:
__alloc_pages_nodemask+0x14c/0x8f0
alloc_pages_current+0xaf/0x120
kimage_alloc_pages+0x10/0x60
kimage_alloc_control_pages+0x5d/0x270
machine_kexec_prepare+0xe5/0x6c0
? kimage_free_page_list+0x52/0x70
sys_kexec_load+0x141/0x600
? vfs_write+0x100/0x180
system_call_fastpath+0x16/0x1b
The patch changes sanity_check_segment_list() to verify that the usage by
all segments does not exceed half of memory.
[akpm@linux-foundation.org: fix for kexec-return-error-number-directly.patch, update comment]
Link: http://lkml.kernel.org/r/1469625474-53904-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide a wrapper function to be used by kernel code to check whether a
crash kernel is loaded. It returns the same value that can be seen in
/sys/kernel/kexec_crash_loaded by userspace programs.
I'm exporting the function, because it will be used by Xen, and it is
possible to compile Xen modules separately to enable the use of PV
drivers with unmodified bare-metal kernels.
Link: http://lkml.kernel.org/r/20160713121955.14969.69080.stgit@hananiah.suse.cz
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kexec physical addresses are the boot-time view of the system. For
certain ARM systems (such as Keystone 2), the boot view of the system
does not match the kernel's view of the system: the boot view uses a
special alias in the lower 4GB of the physical address space.
To cater for these kinds of setups, we need to translate between the
boot view physical addresses and the normal kernel view physical
addresses. This patch extracts the current transation points into
linux/kexec.h, and allows an architecture to override the functions.
Due to the translations required, we unfortunately end up with six
translation functions, which are reduced down to four that the
architecture can override.
[akpm@linux-foundation.org: kexec.h needs asm/io.h for phys_to_virt()]
Link: http://lkml.kernel.org/r/E1b8koP-0004HZ-Vf@rmk-PC.armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On PAE systems (eg, ARM LPAE) the vmcore note may be located above 4GB
physical on 32-bit architectures, so we need a wider type than "unsigned
long" here. Arrange for paddr_vmcoreinfo_note() to return a
phys_addr_t, thereby allowing it to be located above 4GB.
This makes no difference for kexec-tools, as they already assume a
64-bit type when reading from this file.
Link: http://lkml.kernel.org/r/E1b8koK-0004HS-K9@rmk-PC.armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Pratyush Anand <panand@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure that user memory sizes do not wrap around when validating the
user input, which can lead to the following input validation working
incorrectly.
[akpm@linux-foundation.org: fix it for kexec-return-error-number-directly.patch]
Link: http://lkml.kernel.org/r/E1b8koF-0004HM-5x@rmk-PC.armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Pratyush Anand <panand@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a cleanup patch to make kexec more clear to return error number
directly. The variable result is useless, because there is no other
function's return value assignes to it. So remove it.
Link: http://lkml.kernel.org/r/1464179273-57668-1-git-send-email-mnghuan@gmail.com
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Xunlei Pang <xlpang@redhat.com>
Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3f625002581b ("kexec: introduce a protection mechanism for the
crashkernel reserved memory") is a similar mechanism for protecting the
crash kernel reserved memory to previous crash_map/unmap_reserved_pages()
implementation, the new one is more generic in name and cleaner in code
(besides, some arch may not be allowed to unmap the pgtable).
Therefore, this patch consolidates them, and uses the new
arch_kexec_protect(unprotect)_crashkres() to replace former
crash_map/unmap_reserved_pages() which by now has been only used by
S390.
The consolidation work needs the crash memory to be mapped initially,
this is done in machine_kdump_pm_init() which is after
reserve_crashkernel(). Once kdump kernel is loaded, the new
arch_kexec_protect_crashkres() implemented for S390 will actually
unmap the pgtable like before.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Minfei Huang <mhuang@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For the cases that some kernel (module) path stamps the crash reserved
memory(already mapped by the kernel) where has been loaded the second
kernel data, the kdump kernel will probably fail to boot when panic
happens (or even not happens) leaving the culprit at large, this is
unacceptable.
The patch introduces a mechanism for detecting such cases:
1) After each crash kexec loading, it simply marks the reserved memory
regions readonly since we no longer access it after that. When someone
stamps the region, the first kernel will panic and trigger the kdump.
The weak arch_kexec_protect_crashkres() is introduced to do the actual
protection.
2) To allow multiple loading, once 1) was done we also need to remark
the reserved memory to readwrite each time a system call related to
kdump is made. The weak arch_kexec_unprotect_crashkres() is introduced
to do the actual protection.
The architecture can make its specific implementation by overriding
arch_kexec_protect_crashkres() and arch_kexec_unprotect_crashkres().
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Minfei Huang <mhuang@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In NMI context, printk() messages are stored into per-CPU buffers to
avoid a possible deadlock. They are normally flushed to the main ring
buffer via an IRQ work. But the work is never called when the system
calls panic() in the very same NMI handler.
This patch tries to flush NMI buffers before the crash dump is
generated. In this case it does not risk a double release and bails out
when the logbuf_lock is already taken. The aim is to get the messages
into the main ring buffer when possible. It makes them better
accessible in the vmcore.
Then the patch tries to flush the buffers second time when other CPUs
are down. It might be more aggressive and reset logbuf_lock. The aim
is to get the messages available for the consequent kmsg_dump() and
console_flush_on_panic() calls.
The patch causes vprintk_emit() to be called even in NMI context again.
But it is done via printk_deferred() so that the console handling is
skipped. Consoles use internal locks and we could not prevent a
deadlock easily. They are explicitly called later when the crash dump
is not generated, see console_flush_on_panic().
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
