Fix new smatch warnings:
fs/smb/server/smb2pdu.c:6131 smb2_read_pipe() error: double free of 'rpc_resp'
Fixes: e2b76ab8b5 ("ksmbd: add support for read compound")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity Scan report the following one. This report is a false alarm.
Because fp is never NULL when rc is zero. This patch add null check for fp
in ksmbd_update_fstate to make alarm silence.
*** CID 1568583: Null pointer dereferences (FORWARD_NULL)
/fs/smb/server/smb2pdu.c: 3408 in smb2_open()
3402 path_put(&path);
3403 path_put(&parent_path);
3404 }
3405 ksmbd_revert_fsids(work);
3406 err_out1:
3407 if (!rc) {
>>> CID 1568583: Null pointer dereferences (FORWARD_NULL)
>>> Passing null pointer "fp" to "ksmbd_update_fstate", which dereferences it.
3408 ksmbd_update_fstate(&work->sess->file_table, fp, FP_INITED);
3409 rc = ksmbd_iov_pin_rsp(work, (void *)rsp, iov_len);
3410 }
3411 if (rc) {
3412 if (rc == -EINVAL)
3413 rsp->hdr.Status = STATUS_INVALID_PARAMETER;
Fixes: e2b76ab8b5 ("ksmbd: add support for read compound")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
set_smb2_rsp_status() after __process_request() sets the wrong error
status. This patch resets all iov vectors and sets the error status
on clean one.
Fixes: e2b76ab8b5 ("ksmbd: add support for read compound")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cthon test fail with the following error.
check for proper open/unlink operation
nfsjunk files before unlink:
-rwxr-xr-x 1 root root 0 9월 25 11:03 ./nfs2y8Jm9
./nfs2y8Jm9 open; unlink ret = 0
nfsjunk files after unlink:
-rwxr-xr-x 1 root root 0 9월 25 11:03 ./nfs2y8Jm9
data compare ok
nfsjunk files after close:
ls: cannot access './nfs2y8Jm9': No such file or directory
special tests failed
Cthon expect to second unlink failure when file is already unlinked.
ksmbd can not allow to open file if flags of ksmbd inode is set with
S_DEL_ON_CLS flags.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
if thread A in smb2_write is using work-tcon, other thread B use
smb2_tree_disconnect free the tcon, then thread A will use free'd tcon.
Time
+
Thread A | Thread A
smb2_write | smb2_tree_disconnect
|
|
| kfree(tree_conn)
|
// UAF! |
work->tcon->share_conf |
+
This patch add state, reference count and lock for tree conn to fix race
condition issue.
Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a race condition issue between parallel smb2 lock request.
Time
+
Thread A | Thread A
smb2_lock | smb2_lock
|
insert smb_lock to lock_list |
spin_unlock(&work->conn->llist_lock) |
|
| spin_lock(&conn->llist_lock);
| kfree(cmp_lock);
|
// UAF! |
list_add(&smb_lock->llist, &rollback_list) +
This patch swaps the line for adding the smb lock to the rollback list and
adding the lock list of connection to fix the race issue.
Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If parallel smb2 logoff requests come in before closing door, running
request count becomes more than 1 even though connection status is set to
KSMBD_SESS_NEED_RECONNECT. It can't get condition true, and sleep forever.
This patch fix race condition problem by returning error if connection
status was already set to KSMBD_SESS_NEED_RECONNECT.
Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
drop reference after use opinfo.
Signed-off-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
fp can used in each command. If smb2_close command is coming at the
same time, UAF issue can happen by race condition.
Time
+
Thread A | Thread B1 B2 .... B5
smb2_open | smb2_close
|
__open_id |
insert fp to file_table |
|
| atomic_dec_and_test(&fp->refcount)
| if fp->refcount == 0, free fp by kfree.
// UAF! |
use fp |
+
This patch add f_state not to use freed fp is used and not to free fp in
use.
Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If ->iov_idx is zero, This means that the iov vector for the response
was not added during the request process. In other words, it means that
there is a problem in generating a response, So this patch return as
an error to avoid NULL pointer dereferencing problem.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The patch e2b76ab8b5: "ksmbd: add support for read compound" leads
to the following Smatch static checker warning:
fs/smb/server/smb2pdu.c:6329 smb2_read()
warn: passing freed memory 'aux_payload_buf'
It doesn't matter that we're passing a freed variable because nbytes is
zero. This patch set "aux_payload_buf = NULL" to make smatch silence.
Fixes: e2b76ab8b5 ("ksmbd: add support for read compound")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
mark_inode_dirty will be called in notify_change().
This patch remove unneeded mark_inode_dirty in set_info_sec().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd has made significant improvements over the past two
years and is regularly tested and used. Remove the experimental
warning.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=4EB/
-----END PGP SIGNATURE-----
Merge tag '6.6-rc-ksmbd-fixes-part1' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French:
- fix potential overflows in decoding create and in session setup
requests
- cleanup fixes
- compounding fixes, including one for MacOS compounded read requests
- session setup error handling fix
- fix mode bit bug when applying force_directory_mode and
force_create_mode
- RDMA (smbdirect) write fix
* tag '6.6-rc-ksmbd-fixes-part1' of git://git.samba.org/ksmbd:
ksmbd: add missing calling smb2_set_err_rsp() on error
ksmbd: replace one-element array with flex-array member in struct smb2_ea_info
ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob()
ksmbd: fix wrong DataOffset validation of create context
ksmbd: Fix one kernel-doc comment
ksmbd: reduce descriptor size if remaining bytes is less than request size
ksmbd: fix `force create mode' and `force directory mode'
ksmbd: fix wrong interim response on compound
ksmbd: add support for read compound
ksmbd: switch to use kmemdup_nul() helper
-----BEGIN PGP SIGNATURE-----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=CtQO
-----END PGP SIGNATURE-----
Merge tag '6.6-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- fixes for excessive stack usage
- multichannel reconnect improvements
- DFS fix and cleanup patches
- move UCS-2 conversion code to fs/nls and update cifs and jfs to use
them
- cleanup patch for compounding, one to fix confusing function name
- inode number collision fix
- reparse point fixes (including avoiding an extra unneeded query on
symlinks) and a minor cleanup
- directory lease (caching) improvement
* tag '6.6-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
fs/jfs: Use common ucs2 upper case table
fs/smb/client: Use common code in client
fs/smb: Swing unicode common code from smb->NLS
fs/smb: Remove unicode 'lower' tables
SMB3: rename macro CIFS_SERVER_IS_CHAN to avoid confusion
[SMB3] send channel sequence number in SMB3 requests after reconnects
cifs: update desired access while requesting for directory lease
smb: client: reduce stack usage in smb2_query_reparse_point()
smb: client: reduce stack usage in smb2_query_info_compound()
smb: client: reduce stack usage in smb2_set_ea()
smb: client: reduce stack usage in smb_send_rqst()
smb: client: reduce stack usage in cifs_demultiplex_thread()
smb: client: reduce stack usage in cifs_try_adding_channels()
smb: cilent: set reparse mount points as automounts
smb: client: query reparse points in older dialects
smb: client: do not query reparse points twice on symlinks
smb: client: parse reparse point flag in create response
smb: client: get rid of dfs code dep in namespace.c
smb: client: get rid of dfs naming in automount code
smb: client: rename cifs_dfs_ref.c to namespace.c
...
Swing most of the inline functions and unicode tables into nls
from the copy in smb/server. This is UCS-2 rather than most
of the rest of the code in NLS, but it currently seems like the
best place for it.
The actual unicode.c implementations vary much more between server
and client so they're unmoved.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The unicode glue in smb/*/..uniupr.h has a section guarded
by 'ifndef UNIUPR_NOLOWER' - but that's always
defined in smb/*/..unicode.h. Nuke those tables.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If some error happen on smb2_sess_setup(), Need to call
smb2_set_err_rsp() to set error response.
This patch add missing calling smb2_set_err_rsp() on error.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If authblob->SessionKey.Length is bigger than session key
size(CIFS_KEY_SIZE), slub overflow can happen in key exchange codes.
cifs_arc4_crypt copy to session key array from SessionKey from client.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21940
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If ->DataOffset of create context is 0, DataBuffer size is not correctly
validated. This patch change wrong validation code and consider tag
length in request.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21824
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix one kernel-doc comment to silence the warning:
fs/smb/server/smb2pdu.c:4160: warning: Excess function parameter 'infoclass_size' description in 'buffer_check_err'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Create 3 kinds of files to reproduce this problem.
dd if=/dev/urandom of=127k.bin bs=1024 count=127
dd if=/dev/urandom of=128k.bin bs=1024 count=128
dd if=/dev/urandom of=129k.bin bs=1024 count=129
When copying files from ksmbd share to windows or cifs.ko, The following
error message happen from windows client.
"The file '129k.bin' is too large for the destination filesystem."
We can see the error logs from ksmbd debug prints
[48394.611537] ksmbd: RDMA r/w request 0x0: token 0x669d, length 0x20000
[48394.612054] ksmbd: smb_direct: RDMA write, len 0x20000, needed credits 0x1
[48394.612572] ksmbd: filename 129k.bin, offset 131072, len 131072
[48394.614189] ksmbd: nbytes 1024, offset 132096 mincount 0
[48394.614585] ksmbd: Failed to process 8 [-22]
And we can reproduce it with cifs.ko,
e.g. dd if=129k.bin of=/dev/null bs=128KB count=2
This problem is that ksmbd rdma return error if remaining bytes is less
than Length of Buffer Descriptor V1 Structure.
smb_direct_rdma_xmit()
...
if (desc_buf_len == 0 || total_length > buf_len ||
total_length > t->max_rdma_rw_size)
return -EINVAL;
This patch reduce descriptor size with remaining bytes and remove the
check for total_length and buf_len.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
`force create mode' and `force directory mode' should be bitwise ORed
with the perms after `create mask' and `directory mask' have been
applied, respectively.
Signed-off-by: Atte Heikkilä <atteh.mailbox@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If smb2_lock or smb2_open request is compound, ksmbd could send wrong
interim response to client. ksmbd allocate new interim buffer instead of
using resonse buffer to support compound request.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
MacOS sends a compound request including read to the server
(e.g. open-read-close). So far, ksmbd has not handled read as
a compound request. For compatibility between ksmbd and an OS that
supports SMB, This patch provides compound support for read requests.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use kmemdup_nul() helper instead of open-coding to
simplify the code.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXTKAAKCRCRxhvAZXjc
oifJAQCzi/p+AdQu8LA/0XvR7fTwaq64ZDCibU4BISuLGT2kEgEAuGbuoFZa0rs2
XYD/s4+gi64p9Z01MmXm2XO1pu3GPg0=
=eJz5
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.
Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There are multiple smb2_ea_info buffers in FILE_FULL_EA_INFORMATION request
from client. ksmbd find next smb2_ea_info using ->NextEntryOffset of
current smb2_ea_info. ksmbd need to validate buffer length Before
accessing the next ea. ksmbd should check buffer length using buf_len,
not next variable. next is the start offset of current ea that got from
previous ea.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21598
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In commit 2b9b8f3b68 ("ksmbd: validate command payload size"), except
for SMB2_OPLOCK_BREAK_HE command, the request size of other commands
is not checked, it's not expected. Fix it by add check for request
size of other commands.
Cc: stable@vger.kernel.org
Fixes: 2b9b8f3b68 ("ksmbd: validate command payload size")
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Steve French <stfrench@microsoft.com>
Message-Id: <20230705190309.579783-72-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If client send smb2 negotiate request and then send smb1 negotiate
request, init_smb2_rsp_hdr is called for smb1 negotiate request since
need_neg is set to false. This patch ignore smb1 packets after ->need_neg
is set to false.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21541
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd doesn't support compound read. If client send read-read in
compound to ksmbd, there can be memory leak from read buffer.
Windows and linux clients doesn't send it to server yet. For now,
No response from compound read. compound read will be supported soon.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21587, ZDI-CAN-21588
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
`smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session()
will always return the first request smb2 header in a compound request.
if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will
return 0, i.e. The tree id check is skipped.
This patch use ksmbd_req_buf_next() to get current command in compound.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21506
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb3_decrypt_req() validate if pdu_length is smaller than
smb2_transform_hdr size.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21589
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 74d7970feb ("ksmbd: fix racy issue from using ->d_parent and
->d_name"), ksmbd can not lookup cross mount points. If last component is
a cross mount point during path lookup, check if it is crossed to follow it
down. And allow path lookup to cross a mount point when a crossmnt
parameter is set to 'yes' in smb.conf.
Cc: stable@vger.kernel.org
Fixes: 74d7970feb ("ksmbd: fix racy issue from using ->d_parent and ->d_name")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The return value of the ksmbd_vfs_getcasexattr() is signed.
However, the return value is being assigned to an unsigned
variable and subsequently recasted, causing warnings. Use
a signed type.
Signed-off-by: Wang Ming <machel@vivo.com>
Acked-by: Tom Talpey <tom@talpey.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
clang warns about a possible field overflow in a memcpy:
In file included from fs/smb/server/smb_common.c:7:
include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__write_overflow_field(p_size_field, size);
It appears to interpret the "&out[baselen + 4]" as referring to a single
byte of the character array, while the equivalen "out + baselen + 4" is
seen as an offset into the array.
I don't see that kind of warning elsewhere, so just go with the simple
rework.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct smb_negotiate_req.
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/317
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch add the compound request handling to the some commands.
Existing clients do not send these commands as compound requests,
but ksmbd should consider that they may come.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd does not consider the case of that smb2 session setup is
in compound request. If this is the second payload of the compound,
OOB read issue occurs while processing the first payload in
the smb2_sess_setup().
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21355
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It would be better to replace the traditional ternary conditional
operator with min() in compare_sids.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use kvzalloc instead of kvmalloc.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The return value of ksmbd_vfs_query_maximal_access is meaningless,
it is better to modify it to void.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Return a literal instead of 'err' in ksmbd_vfs_kern_path_locked().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use kzalloc() instead of __GFP_ZERO.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
