Neither used nor correctly implemented anywhere. Just completely remove
the interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/226645/
The device parameter is completely unused because it is available in the
attachment structure as well.
v2: fix kerneldoc as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/226643/
I've done a lot of history digging. The first signs of this
optimization was introduced in i915:
commit 25067bfc06
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date: Wed Sep 10 12:03:17 2014 -0300
drm/i915: pin sprite fb only if it changed
without much justification. Pinning already pinned stuff is real cheap
(it's just obj->pin_count++ really), and the missing implicit sync was
entirely forgotten about it seems. It's at least not mentioned
anywhere it the commit message.
It was also promptly removed shortly afterwards in
commit ea2c67bb4a
Author: Matt Roper <matthew.d.roper@intel.com>
Date: Tue Dec 23 10:41:52 2014 -0800
drm/i915: Move to atomic plane helpers (v9)
again without really mentioning the side-effect that plane updates
with the same fb now again obey implicit syncing.
Note that this only ever applied to the plane_update hook, all other
legacy entry points (set_base, page_flip) always obeyed implicit sync
in the drm/i915 driver.
The real source of this code here seems to be msm, copied to vc4, then
copied to tinydrm. I've also tried to dig around in all available msm
sources, but the corresponding check for fb != old_fb is present ever
since the initial merge in
commit cf3a7e4ce0
Author: Rob Clark <robdclark@gmail.com>
Date: Sat Nov 8 13:21:06 2014 -0500
drm/msm: atomic core bits
The only older version I've found of msm atomic code predates the
atomic helpers, and so didn't even use any of this. It also does not
have a corresponding check (because it simply did no implicit sync at
all).
I've chatted with Rob on irc, and he didn't remember the reason for
this either.
Note we had epic amounts of fun with too much syncing against
_vblank_, especially around cursor updates. But I don't ever
discussing a need for less syncing against implicit fences.
Also note that explicit fencing allows you to sidetrack all of this,
at least for all the drivers correctly implemented using
drm_atomic_set_fence_for_plane().
Given that it seems to be an accident of history, and that big drivers
like i915 (and also nouveau it seems, I didn't follow the
amdgpu/radeon sync code to figure this out properly there) never have
done it, let's remove this.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-8-daniel.vetter@ffwll.ch
The vop irq is shared between vop and iommu and irq probing in the
iommu driver moved to the probe function recently. This can in some
cases lead to a stall if the irq is triggered while the vop driver
still has it disabled, but the vop irq handler gets called.
But there is no real need to disable the irq, as the vop can simply
also track its enabled state and ignore irqs in that case.
For this we can simply check the power-domain state of the vop,
similar to how the iommu driver does it.
So remove the enable/disable handling and add appropriate condition
to the irq handler.
changes in v2:
- move to just check the power-domain state
- add clock handling
changes in v3:
- clarify comment to speak of runtime-pm not power-domain
changes in v4:
- address Marc's comments (clk-enable WARN_ON and style improvement)
Fixes: d0b912bd4c ("iommu/rockchip: Request irqs in rk_iommu_probe()")
Cc: stable@vger.kernel.org
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612132028.27490-3-heiko@sntech.de
Judging from the iommu code, both the hclk and aclk are necessary for
register access. Split them off into separate functions from the regular
vop enablement, so that we can use them elsewhere as well.
Fixes: d0b912bd4c ("iommu/rockchip: Request irqs in rk_iommu_probe()")
[prerequisite change for the actual fix]
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612132028.27490-2-heiko@sntech.de
This patch add checks for atomic_[duplicate/destroy]_state of
drm_[connector/crtc/plane]_funcs for atomic drivers in the relevant
drm_*_init functions since these callback are mandatory for atomic drivers.
Update the kerneldoc comments for those callbacks.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525012555.GA8448@haneen-vb
We use jitter bypass mode for spdif, so do not need to set jitter mode
related bit in SPDIF_CTRL_ADDR register. But of course we need to keep
the SPDIF_ENABLE bit.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1526979222-32478-1-git-send-email-hl@rock-chips.com
The device node iterators perform an of_node_get on each iteration, so a
jump out of the loop requires an of_node_put.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
+ of_node_put(child);
? break;
...
}
... when != child
// </smpl>
Fixes: 34cc0aa254 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: stable@vger.kernel.org
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1527102436-13447-6-git-send-email-Julia.Lawall@lip6.fr
This patch makes RC_CORE to be selected with this driver.
sil_sii8620 driver calls remote controller interfaces directly
so RC_CORE should be enabled mandatorily.
And some boards not using remote controller device don't really
need to know that RC_CORE config should be enabled to use sil_sii8620
driver only for HDMI.
Changelog v2:
- select INPUT because compiling will fail without INPUT.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1527154379-31886-1-git-send-email-inki.dae@samsung.com
Stop playing around with plane->crtc/fb/old_fb with atomic
drivers. Make life a lot simpler when we don't have to do the
magic old_fb vs. fb dance around plane updates. That way we
can't risk plane->fb getting out of sync with plane->state->fb
and we're less likely to leak any refcounts as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-14-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
We want to get rid of plane->fb/crtc on atomic drivers. Stop setting
them.
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-13-ville.syrjala@linux.intel.com
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
We want to get rid of plane->crtc on atomic drivers. Stop setting it.
v2: s/fb/crtc/ in the commit message (Gerd)
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-12-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
We want to get rid of plane->fb/crtc on atomic drivers. Stop setting
them.
v2: Fix up the comment in intel_crtc_active() and
nuke the rest of the stale comments (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v1
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-9-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
We want to get rid of plane->fb on atomic drivers. Stop setting it.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-8-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
plane->fb/old_fb/crtc should no longer be used by atomic
drivers. Stop messing about with them.
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-7-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Instead of looking at the (soon to be deprecated) plane->fb we'll
examing plane->state->fb instead. We can do this because
vmw_du_crtc_atomic_check() prevents us from enabling a crtc
without the primary plane also being enabled.
Due to that same reason, I'm actually not sure what the checks here are
for NULL fb. If we can't enable the crtc without an enabled plane
we should always have an fb. But I'll leave that for someone else
to figure out.
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-6-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
The only caller of vmw_kms_update_implicit_fb() is the page_flip
hook which itself gets called with the plane mutex already held.
Hence we can look at plane->state safely.
v2: Drop the bogus lockdep assert
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-4-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Instead of plane->fb (which we're going to deprecate for atomic drivers)
we need to look at plane->state->fb. The maze of code leading to
vmw_kms_helper_dirty() wasn't particularly clear, but my analysis
concluded that the calls originating from vmw_*_primary_plane_atomic_update()
all pass in the crtc which means we'll never end up in this branch
of the function. All other callers use drm_modeset_lock_all() somewhere
higher up, which means accessing plane->state is safe.
v2: Drop the comment and make the code do what it did before (Thomas)
v3: Drop the bogus lockdep assert
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-3-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Instead of looking at plane->fb let's look at the proper new
plane state.
Not that the code makes a ton of sense. It's only going through the
crtcs in the atomic state, so assuming not all of them are included
we're not even calculating the total bandwidth here. Also we're
not considering whether each crtc is actually enabled or not.
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-2-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
This is the format generated by VC4's H.264 engine, and preferred by
the ISP as well. By displaying SAND buffers directly, we can avoid
needing to use the ISP to rewrite the SAND H.264 output to linear
before display.
This is a joint effort by Dave Stevenson (who wrote the initial patch
and DRM demo) and Eric Anholt (drm_fourcc.h generalization, safety
checks, RGBA support).
v2: Make the parameter macro give all of the middle 48 bits (suggested
by Daniels). Fix fourcc_mod_broadcom_mod()'s bits/shift being
swapped. Mark NV12/21 as supported, not YUV420.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com> (v1)
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@anholt.net
Daniel's format_mod_supported() patch predated Dave's for NV21/61, and
I didn't catch that when rebasing. This is a problem since the
formats are now getting validated before being passed to the driver's
atomic hooks.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.org>
Fixes: 423ad7b3cb ("drm/vc4: Advertise supported modifiers for planes")
Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-2-eric@anholt.net
For parameterized modifiers (Broadcom's SAND and UIF), we need to
allow the parameter fields to be filled in, while exposing only the
variant of the modifier with the parameter unfilled in the internal
arrays and the format blob.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-1-eric@anholt.net
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Up to now we've used the plane's modifier list as the primary
source of information for which modifiers are supported by a
given plane. In order to allow auxiliary metadata to be embedded
within the bits of the modifier we need to stop doing that.
Thus we have to make .format_mod_supported() aware of the plane's
capabilities and gracefully deal with any modifier being passed
in directly from userspace.
v2: Rebase after NV12
Simplify
Cc: Eric Anholt <eric@anholt.net>
References: https://lists.freedesktop.org/archives/dri-devel/2018-March/169782.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518162159.30305-1-ville.syrjala@linux.intel.com
Reviewed-by: Eric Anholt <eric@anholt.net>
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180510134203.GA25166@jordon-HP-15-Notebook-PC
Disabling CONFIG_PM produces a compile time warning when these
functions are not referenced:
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:1072:12: error: 'sun6i_dsi_runtime_suspend' defined but not used [-Werror=unused-function]
static int sun6i_dsi_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:1043:12: error: 'sun6i_dsi_runtime_resume' defined but not used [-Werror=unused-function]
static int sun6i_dsi_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 133add5b5a ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525155030.3667352-1-arnd@arndb.de
We want to get rid of plane->fb on atomic drivers. Stop looking at it.
Daniel pointed out that the drm_framebuffer_put() in the plane cleanup
indicates that the driver doesn't shut things down cleanly. To do
that we should be able to just call drm_atomic_helper_shutdown(). Not
really sure the current cleanup sequence is actually sane, but whatever.
v2: Replace the drm_framebuffer_put() with
drm_atomic_helper_shutdown() (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405151400.11326-10-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
omap_framebuffer_get_next_connector() uses plane->fb which we want to
deprecate for atomic drivers. As omap_framebuffer_get_next_connector()
is unused just nuke the entire function.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405151400.11326-11-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Clean up the ugly tmp->primary-> stuff in
__drm_mode_set_config_internal() with a local plane variable.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405151400.11326-13-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want to get rid of plane->crtc on atomic drivers. Stop looking at it.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405151400.11326-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want to stop using plane->fb with atomic driver, so stop looking at
it.
I have no idea what this code is trying to achieve. There is no
corresponding check in the enable path. Also since
arc_pgu_set_pxl_fmt() will anyway oops if there is no fb I'm going
to assuming that I can just remove the check entirely. There seems
to be a general shortage of .atomic_check() in this driver...
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405195035.24722-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alexey Brodkin <abrodkin@synopys.com>
Building for a 32-bit target results in warnings from casting
between a 32-bit pointer and a 64-bit integer. Fix the warnings
by casting those pointers to uintptr_t first.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180523113630.29811-1-andr2000@gmail.com
If we can use an unmappable ring, try to pin it out of the mappable
aperture. This simple layout preference is to try and keep the mappable
aperture reserved and available to handle GGTT mmapping requests from
userspace without causing evictions and GPU stalls.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521082131.13744-4-chris@chris-wilson.co.uk
To no surprise (since we've flip-flopped over the use of PIN_HIGH a few
times), doing a search by address over a pathologically fragmented
address space is exceeding slow. To protect ourselves from nearly
unbounded latency (think searching a million holes while under
struct_mutex), limit the search for the highest available hole and
fallback to best-fit if it fails.
In the pathologically fragmented case, such as igt/gem_ctx_thrash, the
effect is dramatic, bringing the runtime down from hours to seconds
(depending on how many other slow searches you hit, e.g. alloc_iova()
and alloc_vmap_area() both degrade to a slow rbtree walk after their
small cache is exhausted). For the real world, the number of search
steps is unlikely to be significant as we should only need to search
once per new context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521082131.13744-3-chris@chris-wilson.co.uk
Searching for an available hole by address is slow, as there no
guarantee that a hole will be available and so we must walk over all
nodes in the rbtree before we determine the search was futile. In many
cases, the caller doesn't strictly care for the highest available hole
and was just opportunistically laying out the address space in a
preferred order. In such cases, the caller can accept any address and
would rather do so then do a slow walk.
To be able to mix search strategies, the caller wants to tell the drm_mm
how long to spend on the search. Without a good guide for what should be
the best split, start with a request to try once at most. That is return
the top-most (or lowest) hole if it fulfils the alignment and size
requirements.
v2: Documentation, by why of example (selftests) and kerneldoc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521082131.13744-2-chris@chris-wilson.co.uk
As we keep an rbtree of available holes sorted by their size, we can
very easily determine if there is any hole large enough that might
satisfy the allocation request. This helps when dealing with a highly
fragmented address space and a request for a search by address.
To cache the largest size, we convert into the cached rbtree variant
which tracks the leftmost node for us. However, currently we sorted into
ascending size order so the leftmost node is the smallest, and so to
make it the largest hole we need to invert our sorting.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521082131.13744-1-chris@chris-wilson.co.uk
