Commit Graph

181 Commits

Author SHA1 Message Date
DJ Delorie
2f1136d1d0 USB: cp210x: Add Renesas RX-Stick device ID
RX610 development board by Renesas

Bus 001 Device 024: ID 045b:0053 Hitachi, Ltd
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x045b Hitachi, Ltd
  idProduct          0x0053
  bcdDevice            1.00
  iManufacturer           1 Silicon Labs
  iProduct                2 RX-Stick
  iSerial                 3 0001
  . . .

http://am.renesas.com/rx610stick

Signed-off-by: DJ Delorie <dj@delorie.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:21:43 -07:00
A E Lawrence
5b22a32e76 USB: cp210x usb driver: add USB_DEVICE for Pirelli DP-L10 mobile.
The Pirelli DP-L10 mobile is sold under various brand names. One, already
supported by cp210x, is the T-COM TC300. Here is the lsusb for that version:
-------------------------------------------------------------------
Bus 001 Device 002: ID 0489:e000 Foxconn / Hon Hai T-Com TC 300
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0489 Foxconn / Hon Hai
  idProduct          0xe000 T-Com TC 300
  bcdDevice            1.00
  iManufacturer           1 Silicon Labs
  iProduct                2 TC 300
  iSerial                 3 0001
    [snip]
---------------------------------------------------------------------------

However the native Pirelli DP-L10 is not supported:
------------------------------------------------------------------
Bus 001 Device 003: ID 0489:e003 Foxconn / Hon Hai Pirelli DP-L10
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0489 Foxconn / Hon Hai
  idProduct          0xe003 Pirelli DP-L10
  bcdDevice            1.00
  iManufacturer           1 Silicon Labs
  iProduct                2 DP-L10
  iSerial                 3 0001
    [snip]
-------------------------------------------------------------------------

All that is required is an extra USB_DEVICE entry:

{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM
+Mobile */

The patch adds that entry. Tested under 2.6.36-rc2 from git.

Signed-off-by: A E Lawrence <lawrence_a_e@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03 17:33:40 -07:00
Jason Detring
0bf7a81c5d USB: cp210x: Add B&G H3000 link cable ID
This is the cable between an H3000 navigation unit and a multi-function display.
http://www.bandg.com/en/Products/H3000/Spares-and-Accessories/Cables/H3000-CPU-USB-Cable-Pack/

Signed-off-by: Jason Detring <jason.detring@navico.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03 17:33:40 -07:00
Craig Shelley
541e05ec3a USB: CP210x Add new device ID
New device ID added for Balluff RFID reader.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03 17:33:40 -07:00
Craig Shelley
72916791cb USB: CP210x Fix Break On/Off
The definitions for BREAK_ON and BREAK_OFF are inverted, causing break
requests to fail. This patch sets BREAK_ON and BREAK_OFF to the correct
values.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-23 20:50:15 -07:00
Alessio Igor Bogani
356c5a4834 USB: cp210x: Add four new device IDs
Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 14:35:43 -07:00
Craig Shelley
eefd9029fd USB: CP210x New Device IDs 11 New device IDs
Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:48 -07:00
Johan Hovold
a90131763d USB: cp210x: use generic open to start reading from device
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:48 -07:00
Johan Hovold
12e7eca963 USB: cp210x: remove redundant disconnect()
Remove cp210x_disconnect which is used to kill traffic although this is
already handled by the generic framework.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:46 -07:00
Johan Hovold
2db6c7698b USB: cp210x: use generic submit_read_urb at open
There is no need to initialise the read urb as this is done at port
probe.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:34 -07:00
Johan Hovold
f26788da3b USB: serial: refactor generic close
Export usb_serial_generic_close so that drivers can easily kill the read
and write urb and make sure that the write fifo is reset.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:33 -07:00
Johan Hovold
aea006b93a USB: cp210x: increase bulk-in buffer size to 256 byte
The cp210x requires a bulk-in buffer larger than endpoint size to keep
up at high baudrates without loosing data.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:33 -07:00
Johan Hovold
d4e598f65d USB: cp210x: increase the bulk-out buffer size to 256 byte
Increase the bulk-out buffer size from 64 to 256 byte.

This gives a significant increase in throughput already at 1Mbaud
(e.g. 710 instead of 640 KB/s) as well as lowered CPU usage.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:33 -07:00
Michael Brunner
e549a17f69 USB: cp210x: Remove double usb_control_msg from cp210x_set_config
This patch removes a double usb_control_msg that sets the cp210x
configuration registers a second time when calling cp210x_set_config.
For data sizes >2 the second write gets corrupted.
The patch has been created against 2.6.34-rc1, but all cp210x driver
revisions are affected.

Signed-off-by: Michael Brunner <mibru@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:24:23 -07:00
Alan Cox
bd07c551aa USB: cp210x: Add 81E8 (Zephyr Bioharness)
As reported in
http://bugzilla.kernel.org/show_bug.cgi?id=10980

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:55:01 -08:00
Joe Perches
759f363426 USB: serial: Remove unnecessary \n's from dbg uses
#define dbg adds the newline, messages shouldn't.
Converted dbg("%s", "some string") to dbg("some string")

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:58 -08:00
Németh Márton
7d40d7e85a USB serial: make USB device id constant
The id_table field of the struct usb_device_id is constant in <linux/usb.h>
so it is worth to make the initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>

Signed-off-by: Németh Márton <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:16 -08:00
Alan Cox
d94c7bd4c1 tty: cp210x: Fix carrier handling
Original discussion:
http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248
or
http://marc.info/?l=linux-usb&m=125553790714133&w=2

9a68e39d4a broke carrier handling so that a
cp210x setup which needed the carrier lines set up (non CLOCAL) which did
not make a call which set the termios bits left the lines down even if
CLOCAL was not asserted.

Fix this not by reverting but by adding the proper dtr_rts and
carrier_raised methods. This both sets the modem lines properly and also
implements the correct blocking semantics for the port as required by
POSIX.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Karl Hiramoto <karl@hiramoto.org>
Tested-by:  Karl Hiramoto <karl@hiramoto.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17 16:42:43 -08:00
Éric Piel
6f88139eb9 USB: cp210x: Add support for the DW700 UART
In the Dell inspiron mini 10, the GPS is connected via a cp2102. This patch
adds detection of this USB device. (I haven't managed to use the GPS under
Linux yet, though)

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:08 -07:00
Alan Cox
a509a7e478 tty: USB does not need the filp argument in the drivers
And indeed none of them use it. Clean this up as it will make moving to a
standard open method rather easier.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:26 -07:00
Alan Cox
9a68e39d4a tty: remove dtr/rts use from the driver open methods
These are handled by the tty_port core code which will raise and lower the
carrier correctly in tty_wait_until_ready

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:24 -07:00
Craig Shelley
8bf16ba7c8 USB: CP210x Add new device IDs
Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:10 -07:00
Amit Kucheria
0601e116e3 USB: Serial: Add support for Arkham Technology adapters
As reported by David Potts from Arkham Technology, the current driver
works with their hardware on addition of the device ids.

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12 15:16:40 -07:00
Alan Stern
f9c99bb8b3 USB: usb-serial: replace shutdown with disconnect, release
This patch (as1254) splits up the shutdown method of usb_serial_driver
into a disconnect and a release method.

The problem is that the usb-serial core was calling shutdown during
disconnect handling, but drivers didn't expect it to be called until
after all the open file references had been closed.  The result was an
oops when the close method tried to use memory that had been
deallocated by shutdown.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:44:47 -07:00
Craig Shelley
4cc27bd6d7 USB: CP210X Replace CP2101 with CP210x
This patch replaces the string "CP2101" with "CP210x" within cp210x.c
This is to reduce confusion about the fact that the driver is actually
compatible with CP2101, CP2102 and CP2103 devices.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>

(Fixed some collisions merging)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:05 -07:00
Craig Shelley
93ef1f1fbc USB: CP210X Use official request code definitions
The CP210X driver was developed without official device specifications.
This has lead to an incorrect assumption that all GET request codes are
equal to the corresponding SET request code +1.
This patch removes this incorrect assumption, and uses request code
definitions based on the updated GPL driver from SiLabs.
This modification is needed before extended functionality such as GPIO
on CP2103 can be supported.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:05 -07:00
Craig Shelley
b7c7cbc898 USB: CP210X Add device IDs
Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:05 -07:00
Alan Cox
335f8514f2 tty: Bring the usb tty port structure into more use
This allows us to clean stuff up, but is probably also going to cause
some app breakage with buggy apps as we now implement proper POSIX behaviour
for USB ports matching all the other ports. This does also mean other apps
that break on USB will now work properly.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:56 -07:00
VomLehn
d2ad67b3fa USB: Fix cp2101 USB serial device driver termios functions for console use
This is really a follow up to the modifications Alan Cox made for commit
95da310e66 to pass a tty_struct to various
interface functions, which broke the serial configuration (termios) functions
when the device is being used as a console. These changes restore the
configuration to proper functioning both as a tty and as a console.  As Alan
notes in that commit, these changes will need to be tweaked when we have
a proper console abstraction.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
Alex Stephens
d23bac9f8b USB: CP2101 New Device ID
One new device ID for CP2101 driver.

Signed-off-by: Alex Stephens alex@miranova.com
2009-03-24 16:20:45 -07:00
Greg Kroah-Hartman
03ee251546 USB: serial: rename cp2101 driver to cp210x
Lots of users are getting confused about the cp2101 driver.  It really
does support more than just the cp2101 device, so rename it to cp210x to
try to prevent confusion.

Cc: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:44 -07:00