create_or_delete_synth_event() contains code to delete a synthetic
event, which would be useful on its own - specifically, it would be
useful to allow event-creating modules to call it separately.
Separate out the delete code from that function and create an exported
function named synth_event_delete().
Link: http://lkml.kernel.org/r/050db3b06df7f0a4b8a2922da602d1d879c7c1c2.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a function to get an event file and prevent it from going away on
module or instance removal.
trace_get_event_file() will find an event file in a given instance (if
instance is NULL, it assumes the top trace array) and return it,
pinning the instance's trace array as well as the event's module, if
applicable, so they won't go away while in use.
trace_put_event_file() does the matching release.
Link: http://lkml.kernel.org/r/bb31ac4bdda168d5ed3c4b5f5a4c8f633e8d9118.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
[ Moved trace_array_put() to end of trace_put_event_file() ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a new trace_array_find() function that can be used to find a trace
array given the instance name, and replace existing code that does the
same thing with it. Also add trace_array_find_get() which does the
same but returns the trace array after upping its refcount.
Also make both available for use outside of trace.c.
Link: http://lkml.kernel.org/r/cb68528c975eba95bee4561ac67dd1499423b2e5.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
Without patch:
# dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger
dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset
n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
# Available triggers:
# traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
6+1 records in
6+1 records out
206 bytes copied, 0.00027916 s, 738 kB/s
Notice the printing of "# Available triggers:..." after the line.
With the patch:
# dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger
dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset
n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
2+1 records in
2+1 records out
88 bytes copied, 0.000526867 s, 167 kB/s
It only prints the end of the file, and does not restart.
Link: http://lkml.kernel.org/r/3c35ee24-dd3a-8119-9c19-552ed253388a@virtuozzo.comhttps://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
Link: http://lkml.kernel.org/r/7ad85b22-1866-977c-db17-88ac438bc764@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
[ This is not a bug fix, it just makes it "technically correct"
which is why I applied it. NULL is only returned on an anomaly
which triggers a WARN_ON ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
Without patch:
# dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid
dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset
id
no pid
2+1 records in
2+1 records out
10 bytes copied, 0.000213285 s, 46.9 kB/s
Notice the "id" followed by "no pid".
With the patch:
# dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid
dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset
id
0+1 records in
0+1 records out
3 bytes copied, 0.000202112 s, 14.8 kB/s
Notice that it only prints "id" and not the "no pid" afterward.
Link: http://lkml.kernel.org/r/4f87c6ad-f114-30bb-8506-c32274ce2992@virtuozzo.comhttps://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reading the sched_cmdline_ref and sched_tgid_ref initial state within
tracing_start_sched_switch without holding the sched_register_mutex is
racy against concurrent updates, which can lead to tracepoint probes
being registered more than once (and thus trigger warnings within
tracepoint.c).
[ May be the fix for this bug ]
Link: https://lore.kernel.org/r/000000000000ab6f84056c786b93@google.com
Link: http://lkml.kernel.org/r/20190817141208.15226-1-mathieu.desnoyers@efficios.com
Cc: stable@vger.kernel.org
CC: Steven Rostedt (VMware) <rostedt@goodmis.org>
CC: Joel Fernandes (Google) <joel@joelfernandes.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Paul E. McKenney <paulmck@linux.ibm.com>
Reported-by: syzbot+774fddf07b7ab29a1e55@syzkaller.appspotmail.com
Fixes: d914ba37d7 ("tracing: Add support for recording tgid of tasks")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Move external function declarations into kernel/trace/trace.h
from trace_boot.c for tracing subsystem internal use.
Link: http://lkml.kernel.org/r/158029060405.12381.11944554430359702545.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The 'hist:' prefix gets stripped from the command text during command
processing, but should be added back when displaying the command
during error processing.
Not only because it's what should be displayed but also because not
having it means the test cases fail because the caret is miscalculated
by the length of the prefix string.
Link: http://lkml.kernel.org/r/449df721f560042e22382f67574bcc5b4d830d3d.1561743018.git.zanussi@kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In the process of adding better error messages for sorting, I realized
that strsep was being used incorrectly and some of the error paths I
was expecting to be hit weren't and just fell through to the common
invalid key error case.
It also became obvious that for keyword assignments, it wasn't
necessary to save the full assignment and reparse it later, and having
a common empty-assignment check would also make more sense in terms of
error processing.
Change the code to fix these problems and simplify it for new error
message changes in a subsequent patch.
Link: http://lkml.kernel.org/r/1c3ef0b6655deaf345f6faee2584a0298ac2d743.1561743018.git.zanussi@kernel.org
Fixes: e62347d245 ("tracing: Add hist trigger support for user-defined sorting ('sort=' param)")
Fixes: 7ef224d1d0 ("tracing: Add 'hist' event trigger command")
Fixes: a4072fe85b ("tracing: Add a clock attribute for hist triggers")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As warnings can trigger panics, especially when "panic_on_warn" is set,
memory failure warnings can cause panics and fail fuzz testers that are
stressing memory.
Create a MEM_FAIL() macro to use instead of WARN() in the tracing code
(perhaps this should be a kernel wide macro?), and use that for memory
failure issues. This should stop failing fuzz tests due to warnings.
Link: https://lore.kernel.org/r/CACT4Y+ZP-7np20GVRu3p+eZys9GPtbu+JpfV+HtsufAzvTgJrg@mail.gmail.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The trace_array_get_by_name() creates a ftrace instance and
trace_array_put() is used to remove the reference. Even though the
trace_array_get_by_name() creates the instance, it also adds a reference
count to it, that prevents user space from removing it.
As the bootconfig just creates the instance on boot up, it should still be
used where it can be deleted by user space after boot. A trace_array_put()
is required to let that happen.
Also, change the documentation on trace_array_get_by_name() to make this not
be so confusing.
Link: https://lore.kernel.org/r/20200124205927.76128804@rorschach.local.home
Fixes: 4f712a4d04 ("tracing/boot: Add instance node support")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We checked "iter->trace" earlier so there is no need to check here.
Link: http://lkml.kernel.org/r/20141122183012.GB6994@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[ Pulled from the archeological digging of my INBOX ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
I noticed when trying to use the trace-cmd python interface that reading the raw
buffer wasn't working for kernel_stack events. This is because it uses a
stubbed version of __dynamic_array that doesn't do the __data_loc trick and
encode the length of the array into the field. Instead it just shows up as a
size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES
since this is what we actually do in practice and matches how user_stack_trace
works.
Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.com
Signed-off-by: Josef Bacik <jbacik@fb.com>
[ Pulled from the archeological digging of my INBOX ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
tracing_stat_init() was always returning '0', even on the error paths. It
now returns -ENODEV if tracing_init_dentry() fails or -ENOMEM if it fails
to created the 'trace_stat' debugfs directory.
Link: http://lkml.kernel.org/r/1410299381-20108-1-git-send-email-luis.henriques@canonical.com
Fixes: ed6f1c996b ("tracing: Check return value of tracing_init_dentry()")
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
[ Pulled from the archeological digging of my INBOX ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Looking through old emails in my INBOX, I came across a patch from Luis
Henriques that attempted to fix a race of two stat tracers registering the
same stat trace (extremely unlikely, as this is done in the kernel, and
probably doesn't even exist). The submitted patch wasn't quite right as it
needed to deal with clean up a bit better (if two stat tracers were the
same, it would have the same files).
But to make the code cleaner, all we needed to do is to keep the
all_stat_sessions_mutex held for most of the registering function.
Link: http://lkml.kernel.org/r/1410299375-20068-1-git-send-email-luis.henriques@canonical.com
Fixes: 002bb86d8d ("tracing/ftrace: separate events tracing and stats tracing engine")
Reported-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This limitation are never lunched from introduce commit 970988e19e
("tracing/kprobe: Add kprobe_event= boot parameter")
Could we remove it if no intention to implement it?
Link: http://lkml.kernel.org/r/1579586075-45132-1-git-send-email-alex.shi@linux.alibaba.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If we exit due to a bad input to trace_printk() (highly unlikely), then the
buffer variable will not be initialized when we unnest the ring buffer.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
trace_printk() is used to debug the kernel which includes the tracing
infrastructure. But because it writes to the ring buffer, and so does much
of the tracing infrastructure, the ring buffer's recursive detection will
drop writes to the ring buffer that is in the same context as the current
write is happening (it allows interrupts to write when normal context is
writing, but wont let normal context write while normal context is writing).
This can cause confusion and think that the code is where the trace_printk()
exists is not hit. To solve this, up the recursive nesting of the ring
buffer when trace_printk() is called before it writes to the buffer itself.
Note, this does make it dangerous to use trace_printk() in the ring buffer
code itself, because this basically disables the recursion protection of
trace_printk() buffer writes. But as trace_printk() is only used for
debugging, and if this does occur, the developer will see the cause real
quick (recursive blowing up of the stack). Thus the developer can deal with
that. But having trace_printk() silently ignored is a much bigger problem,
and disabling recursive protection is a small price to pay to fix it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Also fixes a couple of typos
Link: http://lkml.kernel.org/r/1401992525-10417-1-git-send-email-fabf@skynet.be
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
[ Found this deep in the abyss of my INBOX ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With CONFIG_PROVE_RCU_LIST, I had many suspicious RCU warnings
when I ran ftracetest trigger testcases.
-----
# dmesg -c > /dev/null
# ./ftracetest test.d/trigger
...
# dmesg | grep "RCU-list traversed" | cut -f 2 -d ] | cut -f 2 -d " "
kernel/trace/trace_events_hist.c:6070
kernel/trace/trace_events_hist.c:1760
kernel/trace/trace_events_hist.c:5911
kernel/trace/trace_events_trigger.c:504
kernel/trace/trace_events_hist.c:1810
kernel/trace/trace_events_hist.c:3158
kernel/trace/trace_events_hist.c:3105
kernel/trace/trace_events_hist.c:5518
kernel/trace/trace_events_hist.c:5998
kernel/trace/trace_events_hist.c:6019
kernel/trace/trace_events_hist.c:6044
kernel/trace/trace_events_trigger.c:1500
kernel/trace/trace_events_trigger.c:1540
kernel/trace/trace_events_trigger.c:539
kernel/trace/trace_events_trigger.c:584
-----
I investigated those warnings and found that the RCU-list
traversals in event trigger and hist didn't need to use
RCU version because those were called only under event_mutex.
I also checked other RCU-list traversals related to event
trigger list, and found that most of them were called from
event_hist_trigger_func() or hist_unregister_trigger() or
register/unregister functions except for a few cases.
Replace these unneeded RCU-list traversals with normal list
traversal macro and lockdep_assert_held() to check the
event_mutex is held.
Link: http://lkml.kernel.org/r/157680910305.11685.15110237954275915782.stgit@devnote2
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add below function-tracer filter options to boot-time tracing.
- ftrace.[instance.INSTANCE.]ftrace.filters
This will take an array of tracing function filter rules
- ftrace.[instance.INSTANCE.]ftrace.notraces
This will take an array of NON-tracing function filter rules
Link: http://lkml.kernel.org/r/157867244841.17873.10933616628243103561.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add ftrace.cpumask option support to boot-time tracing.
This sets cpumask for each instance.
- ftrace.[instance.INSTANCE.]cpumask = CPUMASK;
Set the trace cpumask. Note that the CPUMASK should be a string
which <tracefs>/tracing_cpumask can accepts.
Link: http://lkml.kernel.org/r/157867243625.17873.13613922641273149372.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add instance node support to boot-time tracing. User can set
some options and event nodes under instance node.
- ftrace.instance.INSTANCE[...]
Add new INSTANCE instance. Some options and event nodes
are acceptable for instance node.
Link: http://lkml.kernel.org/r/157867242413.17873.9814204526141500278.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add synthetic event node support to boot time tracing.
The synthetic event is a kind of event node, but the group
name is "synthetic".
- ftrace.event.synthetic.EVENT.fields = FIELD[, FIELD2...]
Defines new synthetic event with FIELDs. Each field should be
"type varname".
The synthetic node requires "fields" string arraies, which defines
the fields as same as tracing/synth_events interface.
Link: http://lkml.kernel.org/r/157867241236.17873.12411615143321557709.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add kprobe event support on event node to boot-time tracing.
If the group name of event is "kprobes", the boot-time tracing
defines new probe event according to "probes" values.
- ftrace.event.kprobes.EVENT.probes = PROBE[, PROBE2...]
Defines new kprobe event based on PROBEs. It is able to define
multiple probes on one event, but those must have same type of
arguments.
For example,
ftrace.events.kprobes.myevent {
probes = "vfs_read $arg1 $arg2";
enable;
}
This will add kprobes:myevent on vfs_read with the 1st and the 2nd
arguments.
Link: http://lkml.kernel.org/r/157867240104.17873.9712052065426433111.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add per-event settings for boottime tracing. User can set filter,
actions and enable on each event on boot. The event entries are
under ftrace.event.GROUP.EVENT node (note that the option key
includes event's group name and event name.) This supports below
configs.
- ftrace.event.GROUP.EVENT.enable
Enables GROUP:EVENT tracing.
- ftrace.event.GROUP.EVENT.filter = FILTER
Set FILTER rule to the GROUP:EVENT.
- ftrace.event.GROUP.EVENT.actions = ACTION[, ACTION2...]
Set ACTIONs to the GROUP:EVENT.
For example,
ftrace.event.sched.sched_process_exec {
filter = "pid < 128"
enable
}
this will enable tracing "sched:sched_process_exec" event
with "pid < 128" filter.
Link: http://lkml.kernel.org/r/157867238942.17873.11177628789184546198.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Setup tracing options via extra boot config in addition to kernel
command line.
This adds following commands support. These are applied to
the global trace instance.
- ftrace.options = OPT1[,OPT2...]
Enable given ftrace options.
- ftrace.trace_clock = CLOCK
Set given CLOCK to ftrace's trace_clock.
- ftrace.buffer_size = SIZE
Configure ftrace buffer size to SIZE. You can use "KB" or "MB"
for that SIZE.
- ftrace.events = EVENT[, EVENT2...]
Enable given events on boot. You can use a wild card in EVENT.
- ftrace.tracer = TRACER
Set TRACER to current tracer on boot. (e.g. function)
Note that this is NOT replacing the kernel parameters, because
this boot config based setting is later than that. If you want to
trace earlier boot events, you still need kernel parameters.
Link: http://lkml.kernel.org/r/157867237723.17873.17494943526320587488.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Make the synthetic event accepts a different type field to record.
However, the size and signed flag must be same.
Link: http://lkml.kernel.org/r/157867235358.17873.61732996461602171.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Register kprobe event to dynevent in subsys_initcall level.
This will allow kernel to register new kprobe events in
fs_initcall level via trace_run_command.
Link: http://lkml.kernel.org/r/157867234213.17873.18039000024374948737.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since kprobe-events use event_trigger_unlock_commit_regs() directly,
that events doesn't show up in printk buffer if "tp_printk" is set.
Use trace_event_buffer_commit() in kprobe events so that it can
invoke output_printk() as same as other trace events.
Link: http://lkml.kernel.org/r/157867233085.17873.5210928676787339604.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Adjusted data var declaration placement in __kretprobe_trace_func() ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Apply soft-disabled and the filter rule of the trace events to
the printk output of tracepoints (a.k.a. tp_printk kernel parameter)
as same as trace buffer output.
Link: http://lkml.kernel.org/r/157867231876.17873.15825819592284704068.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As there's two struct ring_buffers in the kernel, it causes some confusion.
The other one being the perf ring buffer. It was agreed upon that as neither
of the ring buffers are generic enough to be used globally, they should be
renamed as:
perf's ring_buffer -> perf_buffer
ftrace's ring_buffer -> trace_buffer
This implements the changes to the ring buffer that ftrace uses.
Link: https://lore.kernel.org/r/20191213140531.116b3200@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As we are working to remove the generic "ring_buffer" name that is used by
both tracing and perf, the ring_buffer name for tracing will be renamed to
trace_buffer, and perf's ring buffer will be renamed to perf_buffer.
As there already exists a trace_buffer that is used by the trace_arrays, it
needs to be first renamed to array_buffer.
Link: https://lore.kernel.org/r/20191213153553.GE20583@krava
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In the function, if register_trace_sched_migrate_task() returns error,
sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is
why fail_deprobe_sched_switch was added.
Link: http://lkml.kernel.org/r/20191231133530.2794-1-pilgrimtao@gmail.com
Cc: stable@vger.kernel.org
Fixes: 478142c39c ("tracing: do not grab lock in wakeup latency function tracing")
Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ftrace_profile->counter is unsigned long and
do_div truncates it to 32 bits, which means it can test
non-zero and be truncated to zero for division.
Fix this issue by using div64_ul() instead.
Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com
Cc: stable@vger.kernel.org
Fixes: e330b3bcd8 ("tracing: Show sample std dev in function profiling")
Fixes: 34886c8bc5 ("tracing: add average time in function to function profiler")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and
this makes the stack tracer fail to compile. Just define it to zero in this
case.
Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com
Cc: stable@vger.kernel.org
Fixes: 4df297129f ("tracing: Remove most or all of stack tracer stack size from stack_max_size")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to handle direct calls along side of function graph tracer, a check
is made to see if the address being traced by the function graph tracer is a
direct call or not. To get the address used by direct callers, the return
address is subtracted by MCOUNT_INSN_SIZE.
For some archs with certain configurations, MCOUNT_INSN_SIZE is undefined
here. But these should not be using direct calls anyway. Just define
MCOUNT_INSN_SIZE to zero in this case.
Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: ff205766db ("ftrace: Fix function_graph tracer interaction with BPF trampoline")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
gcc produces a variable may be uninitialized warning for "val" in
parse_entry(). This is really a false positive, but the code is subtle
enough to just initialize val to zero and it's not a fast path to worry
about it.
Marked for stable to remove the warning in the stable trees as well.
Cc: stable@vger.kernel.org
Fixes: 6c3edaf9fd ("tracing: Introduce trace event injection")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
At least on PA-RISC and s390 synthetic histogram triggers are failing
selftests because trace_event_raw_event_synth() always writes a 64 bit
values, but the reader expects a field->size sized value. On little endian
machines this doesn't hurt, but on big endian this makes the reader always
read zero values.
Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Fixes: 4b147936fa ("tracing: Add support for 'synthetic' events")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
