Add and change parameter explanation for wp_pte and clean_record_pte, to
avoid W1 warning:
mm/mapping_dirty_helpers.c:34: warning: Function parameter or member 'end' not described in 'wp_pte'
mm/mapping_dirty_helpers.c:88: warning: Function parameter or member 'end' not described in 'clean_record_pte'
Link: https://lkml.kernel.org/r/1605605088-30668-2-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Despite a comment that said that page fault accounting would be charged to
whatever task_struct* was passed into __access_remote_vm(), the tsk
argument was actually unused.
Making page fault accounting actually use this task struct is quite a
project, so there is no point in keeping the tsk argument.
Delete both the comment, and the argument.
[rppt@linux.ibm.com: changelog addition]
Link: https://lkml.kernel.org/r/20201026074137.4147787-1-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HAVE_MOVE_PUD enables remapping pages at the PUD level if both the
source and destination addresses are PUD-aligned.
With HAVE_MOVE_PUD enabled it can be inferred that there is
approximately a 13x improvement in performance on x86. (See data
below).
------- Test Results ---------
The following results were obtained using a 5.4 kernel, by remapping
a PUD-aligned, 1GB sized region to a PUD-aligned destination.
The results from 10 iterations of the test are given below:
Total mremap times for 1GB data on x86. All times are in nanoseconds.
Control HAVE_MOVE_PUD
180394 15089
235728 14056
238931 25741
187330 13838
241742 14187
177925 14778
182758 14728
160872 14418
205813 15107
245722 13998
205721.5 15594 <-- Mean time in nanoseconds
A 1GB mremap completion time drops from ~205 microseconds
to ~15 microseconds on x86. (~13x speed up).
Link: https://lkml.kernel.org/r/20201014005320.2233162-6-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: Jia He <justin.he@arm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HAVE_MOVE_PUD enables remapping pages at the PUD level if both the source
and destination addresses are PUD-aligned.
With HAVE_MOVE_PUD enabled it can be inferred that there is approximately
a 19x improvement in performance on arm64. (See data below).
------- Test Results ---------
The following results were obtained using a 5.4 kernel, by remapping a
PUD-aligned, 1GB sized region to a PUD-aligned destination. The results
from 10 iterations of the test are given below:
Total mremap times for 1GB data on arm64. All times are in nanoseconds.
Control HAVE_MOVE_PUD
1247761 74271
1219896 46771
1094792 59687
1227760 48385
1043698 76666
1101771 50365
1159896 52500
1143594 75261
1025833 61354
1078125 48697
1134312.6 59395.7 <-- Mean time in nanoseconds
A 1GB mremap completion time drops from ~1.1 milliseconds to ~59
microseconds on arm64. (~19x speed up).
Link: https://lkml.kernel.org/r/20201014005320.2233162-5-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Android needs to move large memory regions for garbage collection. The GC
requires moving physical pages of multi-gigabyte heap using mremap.
During this move, the application threads have to be paused for
correctness. It is critical to keep this pause as short as possible to
avoid jitters during user interaction.
Optimize mremap for >= 1GB-sized regions by moving at the PUD/PGD level if
the source and destination addresses are PUD-aligned. For
CONFIG_PGTABLE_LEVELS == 3, moving at the PUD level in effect moves PGD
entries, since the PUD entry is “folded back” onto the PGD entry. Add
HAVE_MOVE_PUD so that architectures where moving at the PUD level isn't
supported/tested can turn this off by not selecting the config.
Link: https://lkml.kernel.org/r/20201014005320.2233162-4-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Speed up mremap on large regions", v4.
mremap time can be optimized by moving entries at the PMD/PUD level if the
source and destination addresses are PMD/PUD-aligned and PMD/PUD-sized.
Enable moving at the PMD and PUD levels on arm64 and x86. Other
architectures where this type of move is supported and known to be safe
can also opt-in to these optimizations by enabling HAVE_MOVE_PMD and
HAVE_MOVE_PUD.
Observed Performance Improvements for remapping a PUD-aligned 1GB-sized
region on x86 and arm64:
- HAVE_MOVE_PMD is already enabled on x86 : N/A
- Enabling HAVE_MOVE_PUD on x86 : ~13x speed up
- Enabling HAVE_MOVE_PMD on arm64 : ~ 8x speed up
- Enabling HAVE_MOVE_PUD on arm64 : ~19x speed up
Altogether, HAVE_MOVE_PMD and HAVE_MOVE_PUD
give a total of ~150x speed up on arm64.
This patch (of 4):
Test mremap on regions of various sizes and alignments and validate data
after remapping. Also provide total time for remapping the region which
is useful for performance comparison of the mremap optimizations that move
pages at the PMD/PUD levels if HAVE_MOVE_PMD and/or HAVE_MOVE_PUD are
enabled.
Link: https://lkml.kernel.org/r/20201014005320.2233162-1-kaleshsingh@google.com
Link: https://lkml.kernel.org/r/20201014005320.2233162-2-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Jia He <justin.he@arm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For many workloads, pagetable consumption is significant and it makes
sense to expose it in the memory.stat for the memory cgroups. However at
the moment, the pagetables are accounted per-zone. Converting them to
per-node and using the right interface will correctly account for the
memory cgroups as well.
[akpm@linux-foundation.org: export __mod_lruvec_page_state to modules for arch/mips/kvm/]
Link: https://lkml.kernel.org/r/20201130212541.2781790-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "memcg: add pagetable comsumption to memory.stat", v2.
Many workloads consumes significant amount of memory in pagetables. One
specific use-case is the user space network driver which mmaps the
application memory to provide zero copy transfer. This driver can consume
a large amount memory in page tables. This patch series exposes the
pagetable comsumption for each memory cgroup.
This patch (of 2):
This does not change any functionality and only move the functions which
update the lruvec stats to vmstat.h from memcontrol.h. The main reason
for this patch is to be able to use these functions in the page table
contructor function which is defined in mm.h and we can not include the
memcontrol.h in that file. Also this is a better place for this interface
in general. The lruvec abstraction, while invented for memcg, isn't
specific to memcg at all.
Link: https://lkml.kernel.org/r/20201130212541.2781790-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Swapcache readahead pages are charged before being used, so it is unlikely
that they will be migrated before charging. Remove the incorrect comment.
Link: https://lkml.kernel.org/r/1605864930-49405-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The *_lruvec_slab_state is also suitable for pages allocated from buddy,
not just for the slab objects. But the function name seems to tell us
that only slab object is applicable. So we can rename the keyword of slab
to kmem.
Link: https://lkml.kernel.org/r/20201117085249.24319-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 2ef1bf118c40 ("mm: memcg: deprecate the non-hierarchical mode")
removed the only use of memcg_has_children() in
mem_cgroup_hierarchy_write() as part of the feature deprecation.
Hence, since then, make CC=clang W=1 warns:
mm/memcontrol.c:3421:20: warning: unused function 'memcg_has_children' [-Wunused-function]
Simply remove this obsolete unused function.
Link: https://lkml.kernel.org/r/20201116055043.20886-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the deprecation of the non-hierarchical mode of the memory controller
there are no more examples of broken hierarchies left.
Let's remove the cgroup core code which was supposed to print warnings
about creating of broken hierarchies.
Link: https://lkml.kernel.org/r/20201110220800.929549-4-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update cgroup v1 docs after the deprecation of the non-hierarchical mode
of the memory controller.
Link: https://lkml.kernel.org/r/20201110220800.929549-3-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: memcg: deprecate cgroup v1 non-hierarchical mode", v1.
The non-hierarchical cgroup v1 mode is a legacy of early days
of the memory controller and doesn't bring any value today.
However, it complicates the code and creates many edge cases
all over the memory controller code.
It's a good time to deprecate it completely. This patchset removes
the internal logic, adjusts the user interface and updates
the documentation. The alt patch removes some bits of the cgroup
core code, which become obsolete.
Michal Hocko said:
"All that we know today is that we have a warning in place to complain
loudly when somebody relies on use_hierarchy=0 with a deeper
hierarchy. For all those years we have seen _zero_ reports that would
describe a sensible usecase.
Moreover we (SUSE) have backported this warning into old distribution
kernels (since 3.0 based kernels) to extend the coverage and didn't
hear even for users who adopt new kernels only very slowly. The only
report we have seen so far was a LTP test suite which doesn't really
reflect any real life usecase"
This patch (of 3):
The non-hierarchical cgroup v1 mode is a legacy of early days of the
memory controller and doesn't bring any value today. However, it
complicates the code and creates many edge cases all over the memory
controller code.
It's a good time to deprecate it completely.
Functionally this patch enabled is by default for all cgroups and forbids
switching it off. Nothing changes if cgroup v2 is used: hierarchical mode
was enforced from scratch.
To protect the ABI memory.use_hierarchy interface is preserved with a
limited functionality: reading always returns "1", writing of "1" passes
silently, writing of any other value fails with -EINVAL and a warning to
dmesg (on the first occasion).
Link: https://lkml.kernel.org/r/20201110220800.929549-1-guro@fb.com
Link: https://lkml.kernel.org/r/20201110220800.929549-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes/removes some obsolete comments in the code related
to the kernel memory accounting:
- kmem_cache->memcg_params.memcg_caches has been removed by commit
9855609bde ("mm: memcg/slab: use a single set of kmem_caches for
all accounted allocations")
- memcg->kmemcg_id is not used as a gate for kmem accounting since
commit 0b8f73e104 ("mm: memcontrol: clean up alloc, online,
offline, free functions")
Link: https://lkml.kernel.org/r/20201110184615.311974-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page->mem_cgroup member is replaced by memcg_data, and add a helper
page_memcg() for it. Need to update comments to avoid confusing.
Link: https://lkml.kernel.org/r/1491c150-1cc0-6062-08ea-9c891548a3bc@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 369ea8242c ("mm/rmap: update to new mmu_notifier semantic
v2"), the code to check the secondary MMU's page table access bit is
broken for !(TTU_IGNORE_ACCESS) because the page is unmapped from the
secondary MMU's page table before the check. More specifically for those
secondary MMUs which unmap the memory in
mmu_notifier_invalidate_range_start() like kvm.
However memory reclaim is the only user of !(TTU_IGNORE_ACCESS) or the
absence of TTU_IGNORE_ACCESS and it explicitly performs the page table
access check before trying to unmap the page. So, at worst the reclaim
will miss accesses in a very short window if we remove page table access
check in unmapping code.
There is an unintented consequence of !(TTU_IGNORE_ACCESS) for the memcg
reclaim. From memcg reclaim the page_referenced() only account the
accesses from the processes which are in the same memcg of the target page
but the unmapping code is considering accesses from all the processes, so,
decreasing the effectiveness of memcg reclaim.
The simplest solution is to always assume TTU_IGNORE_ACCESS in unmapping
code.
Link: https://lkml.kernel.org/r/20201104231928.1494083-1-shakeelb@google.com
Fixes: 369ea8242c ("mm/rmap: update to new mmu_notifier semantic v2")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The rcu_read_lock/unlock only can guarantee that the memcg will not be
freed, but it cannot guarantee the success of css_get to memcg.
If the whole process of a cgroup offlining is completed between reading a
objcg->memcg pointer and bumping the css reference on another CPU, and
there are exactly 0 external references to this memory cgroup (how we get
to the obj_cgroup_charge() then?), css_get() can change the ref counter
from 0 back to 1.
Link: https://lkml.kernel.org/r/20201028035013.99711-2-songmuchun@bytedance.com
Fixes: bf4f059954 ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Consider the following memcg hierarchy.
root
/ \
A B
If we failed to get the reference on objcg of memcg A, the
get_obj_cgroup_from_current can return the wrong objcg for the root
memcg.
Link: https://lkml.kernel.org/r/20201029164429.58703-1-songmuchun@bytedance.com
Fixes: bf4f059954 ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mz->usage_in_excess >= mz_node->usage_in_excess check is exactly the
else case of mz->usage_in_excess < mz_node->usage_in_excess. So we could
replace else if (mz->usage_in_excess >= mz_node->usage_in_excess) with
else equally. Also drop the comment which doesn't really explain much.
Link: https://lkml.kernel.org/r/20201012131607.10656-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 991e767385 ("mm: memcontrol: account kernel stack per
node") there is no user of the mod_memcg_obj_state(). So just remove
it.
Also rework type of the idx parameter of the mod_objcg_state() from int
to enum node_stat_item.
Link: https://lkml.kernel.org/r/20201013153504.92602-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As huge page usage in the page cache and for shmem files proliferates in
our production environment, the performance monitoring team has asked for
per-cgroup stats on those pages.
We already track and export anon_thp per cgroup. We already track file
THP and shmem THP per node, so making them per-cgroup is only a matter of
switching from node to lruvec counters. All callsites are in places where
the pages are charged and locked, so page->memcg is stable.
[hannes@cmpxchg.org: add documentation]
Link: https://lkml.kernel.org/r/20201026174029.GC548555@cmpxchg.org
Link: https://lkml.kernel.org/r/20201022151844.489337-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a typo, punctuation, use uppercase for CPUs, and limit
tmpfs to keeping only its files in virtual memory (phrasing).
Link: https://lkml.kernel.org/r/20201202010934.18566-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shmem_mapping() isn't worth an out-of-line call from any callsite.
So make it inline by
- make shmem_aops global
- export shmem_aops
- inline the shmem_mapping()
and replace the direct call 'shmem_aops' with shmem_mapping()
in shmem.c.
Link: https://lkml.kernel.org/r/20201115165207.GA265355@rlk
Signed-off-by: Hui Su <sh_def@163.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the merge of commit 2e16929660 ("ceph: have ceph_writepages_start
call pagevec_lookup_range_tag"), nothing calls this anymore.
Link: https://lkml.kernel.org/r/20201021193926.101474-1-jlayton@kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We could use helper memset to fill the swap_map with SWAP_HAS_CACHE instead
of a direct loop here to simplify the code. Also we can remove the local
variable i and map this way.
Link: https://lkml.kernel.org/r/20200921122224.7139-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the code went to the out label, it must have p == NULL. So what out
label really does is redundant if check and return err. We should Remove
this unnecessary out label because it does not handle resource free and so
on.
Link: https://lkml.kernel.org/r/20201009130337.29698-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
swap_ra_info() may leave ra_info untouched in non_swap_entry() case as
page table lock is not held. In this case, we have ra_info.nr_pte == 0
and it is meaningless to continue with swap cache readahead. Skip such
ops by init ra_info.win = 1.
[akpm@linux-foundation.org: clean up struct init]
Link: https://lkml.kernel.org/r/20201009133059.58407-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 570a335b8e ("swap_info: swap count continuations") introduced the
func add_swap_count_continuation() but forgot to use the helper function
swap_count() introduced by commit 355cfa73dd ("mm: modify swap_map and
add SWAP_HAS_CACHE flag").
Link: https://lkml.kernel.org/r/20201009134306.18033-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
release_pages() is an optimized, inlined version of __put_pages() except
that zone device struct pages that are not page_is_devmap_managed() (i.e.,
memory_type MEMORY_DEVICE_GENERIC and MEMORY_DEVICE_PCI_P2PDMA), fall
through to the code that could return the zone device page to the page
allocator instead of adjusting the pgmap reference count.
Clearly these type of pages are not having the reference count decremented
to zero via release_pages() or page allocation problems would be seen.
Just to be safe, handle the 1 to zero case in release_pages() like
__put_page() does.
Link: https://lkml.kernel.org/r/20201021194733.11530-1-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These functions accomplish the same thing but have different
implementations.
unpin_user_page() has a bug where it calls mod_node_page_state() after
calling put_page() which creates a risk that the page could have been
hot-uplugged from the system.
Fix this by using put_compound_head() as the only implementation.
__unpin_devmap_managed_user_page() and related can be deleted as well in
favour of the simpler, but slower, version in put_compound_head() that has
an extra atomic page_ref_sub, but always calls put_page() which internally
contains the special devmap code.
Move put_compound_head() to be directly after try_grab_compound_head() so
people can find it in future.
Link: https://lkml.kernel.org/r/0-v1-6730d4ee0d32+40e6-gup_combine_put_jgg@nvidia.com
Fixes: 1970dc6f52 ("mm/gup: /proc/vmstat: pin_user_pages (FOLL_PIN) reporting")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
CC: Joao Martins <joao.m.martins@oracle.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Dan Williams <dan.j.williams@intel.com>
CC: Dave Chinner <david@fromorbit.com>
CC: Christoph Hellwig <hch@infradead.org>
CC: Jane Chu <jane.chu@oracle.com>
CC: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
CC: Michal Hocko <mhocko@suse.com>
CC: Mike Kravetz <mike.kravetz@oracle.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Muchun Song <songmuchun@bytedance.com>
CC: Vlastimil Babka <vbabka@suse.cz>
CC: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Long ago there wasn't a FOLL_LONGTERM flag so this DAX check was done by
post-processing the VMA list.
These days it is trivial to just check each VMA to see if it is DAX before
processing it inside __get_user_pages() and return failure if a DAX VMA is
encountered with FOLL_LONGTERM.
Removing the allocation of the VMA list is a significant speed up for many
call sites.
Add an IS_ENABLED to vma_is_fsdax so that code generation is unchanged
when DAX is compiled out.
Remove the dummy version of __gup_longterm_locked() as !CONFIG_CMA already
makes memalloc_nocma_save(), check_and_migrate_cma_pages(), and
memalloc_nocma_restore() into a NOP.
Link: https://lkml.kernel.org/r/0-v1-5551df3ed12e+b8-gup_dax_speedup_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 70e806e4e6 ("mm: Do early cow for pinned pages during
fork() for ptes") pages under a FOLL_PIN will not be write protected
during COW for fork. This means that pages returned from
pin_user_pages(FOLL_WRITE) should not become write protected while the pin
is active.
However, there is a small race where get_user_pages_fast(FOLL_PIN) can
establish a FOLL_PIN at the same time copy_present_page() is write
protecting it:
CPU 0 CPU 1
get_user_pages_fast()
internal_get_user_pages_fast()
copy_page_range()
pte_alloc_map_lock()
copy_present_page()
atomic_read(has_pinned) == 0
page_maybe_dma_pinned() == false
atomic_set(has_pinned, 1);
gup_pgd_range()
gup_pte_range()
pte_t pte = gup_get_pte(ptep)
pte_access_permitted(pte)
try_grab_compound_head()
pte = pte_wrprotect(pte)
set_pte_at();
pte_unmap_unlock()
// GUP now returns with a write protected page
The first attempt to resolve this by using the write protect caused
problems (and was missing a barrrier), see commit f3c64eda3e ("mm: avoid
early COW write protect games during fork()")
Instead wrap copy_p4d_range() with the write side of a seqcount and check
the read side around gup_pgd_range(). If there is a collision then
get_user_pages_fast() fails and falls back to slow GUP.
Slow GUP is safe against this race because copy_page_range() is only
called while holding the exclusive side of the mmap_lock on the src
mm_struct.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lore.kernel.org/r/CAHk-=wi=iCnYCARbPGjkVJu9eyYeZ13N64tZYLdOB8CP5Q_PLw@mail.gmail.com
Link: https://lkml.kernel.org/r/2-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Fixes: f3c64eda3e ("mm: avoid early COW write protect games during fork()")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: "Ahmed S. Darwish" <a.darwish@linutronix.de> [seqcount_t parts]
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Add a seqcount between gup_fast and copy_page_range()", v4.
As discussed and suggested by Linus use a seqcount to close the small race
between gup_fast and copy_page_range().
Ahmed confirms that raw_write_seqcount_begin() is the correct API to use
in this case and it doesn't trigger any lockdeps.
I was able to test it using two threads, one forking and the other using
ibv_reg_mr() to trigger GUP fast. Modifying copy_page_range() to sleep
made the window large enough to reliably hit to test the logic.
This patch (of 2):
The next patch in this series makes the lockless flow a little more
complex, so move the entire block into a new function and remove a level
of indention. Tidy a bit of cruft:
- addr is always the same as start, so use start
- Use the modern check_add_overflow() for computing end = start + len
- nr_pinned/pages << PAGE_SHIFT needs the LHS to be unsigned long to
avoid shift overflow, make the variables unsigned long to avoid coding
casts in both places. nr_pinned was missing its cast
- The handling of ret and nr_pinned can be streamlined a bit
No functional change.
Link: https://lkml.kernel.org/r/0-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Link: https://lkml.kernel.org/r/1-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Without DEBUG_FS, all the code in gup_benchmark becomes meaningless.
For sure kernel provides debugfs stub while DEBUG_FS is disabled, but
the point here is that GUP_TEST can do nothing without DEBUG_FS.
[song.bao.hua@hisilicon.com: add comment as a prompt to users as commented by John and Randy]
Link: https://lkml.kernel.org/r/20201108083732.15336-1-song.bao.hua@hisilicon.com
Link: https://lkml.kernel.org/r/20201104100552.20156-1-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gup_test_init() is only called during initialization, mark it as __init to
save some memory.
Link: https://lkml.kernel.org/r/20201103081016.16532-1-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Each invocation of userfaultfd for "anon" and "shmem" was taking about
6.5 sec to run, contributing to an overall run time of about 22 sec for
run_vmtests.sh.
Reduce the size and bounce input values to the userfaultfd invocation
within run_vmtests.sh, enough to get each invocation down to about 1.0
sec. This should still provide a reasonable smoke test, while staying
within a nominal time budget of around 1 second or so per test. And this
brings the overall running time of run_vmtests.sh down to 11 second.
Link: https://lkml.kernel.org/r/20201026064021.3545418-10-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HMM selftests are incredibly useful, but they are only effective if people
actually build and run them. All the other tests in selftests/vm can be
built with very standard, always-available libraries: libpthread, librt.
The hmm-tests.c program, on the other hand, requires something that is
(much) less readily available: libhugetlbfs. And so the build will
typically fail for many developers.
A simple attempt to install libhugetlbfs will also run into complications
on some common distros these days: Fedora and Arch Linux (yes, Arch AUR
has it, but that's fragile, as always with AUR). The library is not
maintained actively enough at the moment, for distros to deal with it. I
had to build it from source, for Fedora, and that didn't go too smoothly
either.
It turns out that, out of 21 tests in hmm-tests.c, only 2 actually require
functionality from libhugetlbfs. Therefore, if libhugetlbfs is missing,
simply ifdef those two tests out and allow the developer to at least have
the other 19 tests, if they don't want to pause to work through the above
issues. Also issue a warning, so that it's clear that there is an
imperfection in the build.
In order to do that, a tiny shell script (check_config.sh) runs a quick
compile (not link, that's too prone to false failures with library paths),
and basically, if the compiler doesn't find hugetlbfs.h in its standard
locations, then the script concludes that libhugetlbfs is not available.
The output is in two files, one for inclusion in hmm-test.c
(local_config.h), and one for inclusion in the Makefile (local_config.mk).
Link: https://lkml.kernel.org/r/20201026064021.3545418-9-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Run benchmarks on the _fast variants of gup and pup, as originally
intended.
Run the new gup_test sub-test: dump pages. In addition to exercising the
dump_page() call, it also demonstrates the various options you can use to
specify which pages to dump, and how.
Link: https://lkml.kernel.org/r/20201026064021.3545418-8-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For quite a while, I was doing a quick hack to gup_test.c (previously,
gup_benchmark.c) whenever I wanted to try out my changes to dump_page().
This makes that hack unnecessary, and instead allows anyone to easily get
the same coverage from a user space program. That saves a lot of time
because you don't have to change the kernel, in order to test different
pages and options.
The new sub-test takes advantage of the existing gup_test infrastructure,
which already provides a simple user space program, some allocated user
space pages, an ioctl call, pinning of those pages (via either
get_user_pages or pin_user_pages) and a corresponding kernel-side test
invocation. There's not much more required, mainly just a couple of
inputs from the user.
In fact, the new test re-uses the existing command line options in order
to get various helpful combinations (THP or normal, _fast or slow gup, gup
vs. pup, and more).
New command line options are: which pages to dump, and what type of
"get/pin" to use.
In order to figure out which pages to dump, the logic is:
* If the user doesn't specify anything, the page 0 (the first page in
the address range that the program sets up for testing) is dumped.
* Or, the user can type up to 8 page indices anywhere on the command
line. If you type more than 8, then it uses the first 8 and ignores the
remaining items.
For example:
./gup_test -ct -F 1 0 19 0x1000
Meaning:
-c: dump pages sub-test
-t: use THP pages
-F 1: use pin_user_pages() instead of get_user_pages()
0 19 0x1000: dump pages 0, 19, and 4096
Link: https://lkml.kernel.org/r/20201026064021.3545418-7-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Therefore, some minor cleanup and improvements are in order:
1. Rename the other items appropriately.
2. Stop reporting timing information on the non-benchmark items. It's
still being recorded and is available, but there's no point in
cluttering up the report with data that no one reasonably needs to
check.
3. Don't do iterations, for non-benchmark items.
4. Print out a shorter, more appropriate report for the non-benchmark
tests.
5. Add the command that was run, to the report. This really helps, as
there are quite a lot of options now.
6. Use a larger integer type for cmd, now that it's being compared
Otherwise it doesn't work, because in this case cmd is about 3 billion,
which is the perfect size for problems with signed vs unsigned int.
Link: https://lkml.kernel.org/r/20201026064021.3545418-6-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few cleanups that don't deserve separate patches, but that also should
not clutter up other functional changes:
1. Remove an unnecessary #include <prctl.h>
2. Restore the sorted order of TEST_GEN_FILES.
3. Add -lpthread to the common LDLIBS, as it is harmless and several
tests use it. This gets rid of one special rule already.
Link: https://lkml.kernel.org/r/20201026064021.3545418-5-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename to *.sh, in order to match the conventions of all of the other
items in selftest/vm.
The only reason not to use a .sh suffix a shell script like this, might be
to make it look more like a normal program, but that's not an issue here.
Link: https://lkml.kernel.org/r/20201026064021.3545418-4-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid the need to copy-paste the gup_test ioctl commands and the struct
gup_test definition, between the kernel and the user space application, by
providing a new header file for these. This allows easier and safer
adding of new ioctl calls, as well as reducing the overall line count.
Details: The header file has to be able to compile independently, because
of the arguably unfortunate way that the Makefile is written: the Makefile
tries to build all of its prerequisites, when really it should be only
building the .c files, and leaving the other prerequisites (LOCAL_HDRS) as
pure dependencies.
That Makefile limitation is probably not worth fixing, but it explains why
one of the includes had to be moved into the new header file.
Also: simplify the ioctl struct (struct gup_test), by deleting the unused
__expansion[10] field. This sort of thing is what you might see in a
stable ABI, but this low-level, kernel-developer-oriented selftests/vm
system is very much not subject to ABI stability. So "expansion" and
"reserved" fields are unnecessary here.
Link: https://lkml.kernel.org/r/20201026064021.3545418-3-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "selftests/vm: gup_test, hmm-tests, assorted improvements", v3.
Summary: This series provides two main things, and a number of smaller
supporting goodies. The two main points are:
1) Add a new sub-test to gup_test, which in turn is a renamed version
of gup_benchmark. This sub-test allows nicer testing of dump_pages(),
at least on user-space pages.
For quite a while, I was doing a quick hack to gup_test.c whenever I
wanted to try out changes to dump_page(). Then Matthew Wilcox asked me
what I meant when I said "I used my dump_page() unit test", and I
realized that it might be nice to check in a polished up version of
that.
Details about how it works and how to use it are in the commit
description for patch #6 ("selftests/vm: gup_test: introduce the
dump_pages() sub-test").
2) Fixes a limitation of hmm-tests: these tests are incredibly useful,
but only if people actually build and run them. And it turns out that
libhugetlbfs is a little too effective at throwing a wrench in the
works, there. So I've added a little configuration check that removes
just two of the 21 hmm-tests, if libhugetlbfs is not available.
Further details in the commit description of patch #8
("selftests/vm: hmm-tests: remove the libhugetlbfs dependency").
Other smaller things that this series does:
a) Remove code duplication by creating gup_test.h.
b) Clear up the sub-test organization, and their invocation within
run_vmtests.sh.
c) Other minor assorted improvements.
[1] v2 is here:
https://lore.kernel.org/linux-doc/20200929212747.251804-1-jhubbard@nvidia.com/
[2] https://lore.kernel.org/r/CAHk-=wgh-TMPHLY3jueHX7Y2fWh3D+nMBqVS__AZm6-oorquWA@mail.gmail.com
This patch (of 9):
Rename nearly every "gup_benchmark" reference and file name to "gup_test".
The one exception is for the actual gup benchmark test itself.
The current code already does a *little* bit more than benchmarking, and
definitely covers more than get_user_pages_fast(). More importantly,
however, subsequent patches are about to add some functionality that is
non-benchmark related.
Closely related changes:
* Kconfig: in addition to renaming the options from GUP_BENCHMARK to
GUP_TEST, update the help text to reflect that it's no longer a
benchmark-only test.
Link: https://lkml.kernel.org/r/20201026064021.3545418-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20201026064021.3545418-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The `else' is not useful after a `return' in __lock_page_or_retry().
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20201202154720.115162-1-carver4lio@163.com
Signed-off-by: Hailong Liu<liu.hailong6@zte.com.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To fix a kernel-doc markups issue:
mm/truncate.c:646: warning: Function parameter or member 'mapping' not described in 'invalidate_mapping_pagevec'
mm/truncate.c:646: warning: Function parameter or member 'start' not described in 'invalidate_mapping_pagevec'
mm/truncate.c:646: warning: Function parameter or member 'end' not described in 'invalidate_mapping_pagevec'
mm/truncate.c:646: warning: Function parameter or member 'nr_pagevec' not described in 'invalidate_mapping_pagevec'
Link: https://lkml.kernel.org/r/1605605088-30668-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
