Now that devlink ports are protected by the instance lock
it seems natural to pass devlink_port as an argument to
the port_split / port_unsplit callbacks.
This should save the drivers from doing a lookup.
In theory drivers may have supported unsplitting ports
which were not registered prior to this change.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let the core take the devlink instance lock around port splitting
and remove the now redundant locking in the drivers.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It should be familiar and beneficial to expose devlink instance
lock to the drivers. This way drivers can block devlink from
calling them during critical sections without breakneck locking.
Add port helpers, port splitting callbacks will be the first
target.
Use 'devl_' prefix for "explicitly locked" API. Initial RFC used
'__devlink' but that's too much typing.
devl_lock_is_held() is not defined without lockdep, which is
the same behavior as lockdep_is_held() itself.
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
____napi_schedule() needs to be invoked with disabled interrupts due to
__raise_softirq_irqoff (in order not to corrupt the per-CPU list).
____napi_schedule() needs also to be invoked from an interrupt context
so that the raised-softirq is processed while the interrupt context is
left.
Add lockdep asserts for both conditions.
While this is the second time the irq/softirq check is needed, provide a
generic lockdep_assert_softirq_will_run() which is used by both caller.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before adding yet another possibly contended atomic_long_t,
it is time to add per-cpu storage for existing ones:
dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler
Because many devices do not have to increment such counters,
allocate the per-cpu storage on demand, so that dev_get_stats()
does not have to spend considerable time folding zero counters.
Note that some drivers have abused these counters which
were supposed to be only used by core networking stack.
v4: should use per_cpu_ptr() in dev_get_stats() (Jakub)
v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo)
v2: add a missing include (reported by kernel test robot <lkp@intel.com>)
Change in netdev_core_stats_alloc() (Jakub)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: jeffreyji <jeffreyji@google.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_name_node_alt_create() and netdev_name_node_alt_destroy()
are only called by rtnetlink, so no need for exports.
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220310223952.558779-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit bf08824a0f ("flow_dissector: Add support for HSR") added support for
HSR within the flow dissector. However, it only works for HSR in version
1. Version 0 uses a different Ether Type. Add support for it.
Reported-by: Anthony Harivel <anthony.harivel@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Property list (altname is a link "property") is wrapped
in a nlattr. nlattrs length is 16bit so practically
speaking the list of properties can't be longer than
that, otherwise user space would have to interpret
broken netlink messages.
Prevent the problem from occurring by checking the length
of the property list before adding new entries.
Reported-by: George Shuklin <george.shuklin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
George reports that altnames can eat up kernel memory.
We should charge that memory appropriately.
Reported-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the commit mentioned below __xdp_reg_mem_model() can return a NULL
pointer. This pointer is dereferenced in trace_mem_connect() which leads
to segfault.
The trace points (mem_connect + mem_disconnect) were put in place to
pair connect/disconnect using the IDs. The ID is only assigned if
__xdp_reg_mem_model() does not return NULL. That connect trace point is
of no use if there is no ID.
Skip that connect trace point if xdp_alloc is NULL.
[ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace
point ]
Fixes: 4a48ef70b9 ("xdp: Allow registering memory model without rxq reference")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/YikmmXsffE+QajTB@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-03-09
1) Fix IPv6 PMTU discovery for xfrm interfaces.
From Lina Wang.
2) Revert failing for policies and states that are
configured with XFRMA_IF_ID 0. It broke a
user configuration. From Kai Lueke.
3) Fix a possible buffer overflow in the ESP output path.
4) Fix ESP GSO for tunnel and BEET mode on inter address
family tunnels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ENOTSUPP is documented as "should never be seen by user programs",
and thus not exposed in <errno.h>, and thus applications cannot safely
check against it (they get "Unknown error 524" as strerror). We should
rather return the well-known -EOPNOTSUPP.
This is similar to 2230a7ef51 ("drop_monitor: Use correct error
code") and 4a5cdc604b ("net/tls: Fix return values to avoid
ENOTSUPP"), which did not seem to cause problems.
Signed-off-by: Samuel Thibault <samuel.thibault@labri.fr>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220307223126.djzvg44v2o2jkjsx@begin
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The clang static analyzer reports this issue
rtnetlink.c:5481:2: warning: Undefined or garbage
value returned to caller
return err;
^~~~~~~~~~
There is a function level err variable, in the
list_for_each_entry_rcu block there is a shadow
err. Remove the shadow.
In the same block, the call to nla_nest_start_noflag()
can fail without setting an err. Set the err
to -EMSGSIZE.
Fixes: 216e690631 ("net: rtnetlink: rtnl_fill_statsinfo(): Permit non-EMSGSIZE error returns")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The esp tunnel GSO handlers use skb_mac_gso_segment to
push the inner packet to the segmentation handlers.
However, skb_mac_gso_segment takes the Ethernet Protocol
ID from 'skb->protocol' which is wrong for inter address
family tunnels. We fix this by introducing a new
skb_eth_gso_segment function.
This function can be used if it is necessary to pass the
Ethernet Protocol ID directly to the segmentation handler.
First users of this function will be the esp4 and esp6
tunnel segmentation handlers.
Fixes: c35fe4106b ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
PHY drivers such as micrel or dp83640 need to analyze whether a given
skb is a PTP sync message for one step functionality.
In order to avoid code duplication introduce a generic function and
move it to ptp classify.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add reason for skb drops to __netif_receive_skb_core() when packet_type
not found to handle the skb. For this purpose, the drop reason
SKB_DROP_REASON_PTYPE_ABSENT is introduced. Take ether packets for
example, this case mainly happens when L3 protocol is not supported.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in sch_handle_ingress() with
kfree_skb_reason(). Following drop reasons are introduced:
SKB_DROP_REASON_TC_INGRESS
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in do_xdp_generic() with kfree_skb_reason().
The drop reason SKB_DROP_REASON_XDP is introduced for this case.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in enqueue_to_backlog() with
kfree_skb_reason(). The skb rop reason SKB_DROP_REASON_CPU_BACKLOG is
introduced for the case of failing to enqueue the skb to the per CPU
backlog queue. The further reason can be backlog queue full or RPS
flow limition, and I think we needn't to make further distinctions.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add reasons for skb drops to __dev_xmit_skb() by replacing
kfree_skb_list() with kfree_skb_list_reason(). The drop reason of
SKB_DROP_REASON_QDISC_DROP is introduced for qdisc enqueue fails.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To report reasons of skb drops, introduce the function
kfree_skb_list_reason() and make kfree_skb_list() an inline call to
it. This function will be used in the next commit in
__dev_xmit_skb().
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in sch_handle_egress() with kfree_skb_reason().
The drop reason SKB_DROP_REASON_TC_EGRESS is introduced. Considering
the code path of tc egerss, we make it distinct with the drop reason
of SKB_DROP_REASON_QDISC_DROP in the next commit.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
* __sk_buff->delivery_time_type:
This patch adds __sk_buff->delivery_time_type. It tells if the
delivery_time is stored in __sk_buff->tstamp or not.
It will be most useful for ingress to tell if the __sk_buff->tstamp
has the (rcv) timestamp or delivery_time. If delivery_time_type
is 0 (BPF_SKB_DELIVERY_TIME_NONE), it has the (rcv) timestamp.
Two non-zero types are defined for the delivery_time_type,
BPF_SKB_DELIVERY_TIME_MONO and BPF_SKB_DELIVERY_TIME_UNSPEC. For UNSPEC,
it can only happen in egress because only mono delivery_time can be
forwarded to ingress now. The clock of UNSPEC delivery_time
can be deduced from the skb->sk->sk_clockid which is how
the sch_etf doing it also.
* Provide forwarded delivery_time to tc-bpf@ingress:
With the help of the new delivery_time_type, the tc-bpf has a way
to tell if the __sk_buff->tstamp has the (rcv) timestamp or
the delivery_time. During bpf load time, the verifier will learn if
the bpf prog has accessed the new __sk_buff->delivery_time_type.
If it does, it means the tc-bpf@ingress is expecting the
skb->tstamp could have the delivery_time. The kernel will then
read the skb->tstamp as-is during bpf insn rewrite without
checking the skb->mono_delivery_time. This is done by adding a
new prog->delivery_time_access bit. The same goes for
writing skb->tstamp.
* bpf_skb_set_delivery_time():
The bpf_skb_set_delivery_time() helper is added to allow setting both
delivery_time and the delivery_time_type at the same time. If the
tc-bpf does not need to change the delivery_time_type, it can directly
write to the __sk_buff->tstamp as the existing tc-bpf has already been
doing. It will be most useful at ingress to change the
__sk_buff->tstamp from the (rcv) timestamp to
a mono delivery_time and then bpf_redirect_*().
bpf only has mono clock helper (bpf_ktime_get_ns), and
the current known use case is the mono EDT for fq, and
only mono delivery time can be kept during forward now,
so bpf_skb_set_delivery_time() only supports setting
BPF_SKB_DELIVERY_TIME_MONO. It can be extended later when use cases
come up and the forwarding path also supports other clock bases.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current tc-bpf@ingress reads and writes the __sk_buff->tstamp
as a (rcv) timestamp which currently could either be 0 (not available)
or ktime_get_real(). This patch is to backward compatible with the
(rcv) timestamp expectation at ingress. If the skb->tstamp has
the delivery_time, the bpf insn rewrite will read 0 for tc-bpf
running at ingress as it is not available. When writing at ingress,
it will also clear the skb->mono_delivery_time bit.
/* BPF_READ: a = __sk_buff->tstamp */
if (!skb->tc_at_ingress || !skb->mono_delivery_time)
a = skb->tstamp;
else
a = 0
/* BPF_WRITE: __sk_buff->tstamp = a */
if (skb->tc_at_ingress)
skb->mono_delivery_time = 0;
skb->tstamp = a;
[ A note on the BPF_CGROUP_INET_INGRESS which can also access
skb->tstamp. At that point, the skb is delivered locally
and skb_clear_delivery_time() has already been done,
so the skb->tstamp will only have the (rcv) timestamp. ]
If the tc-bpf@egress writes 0 to skb->tstamp, the skb->mono_delivery_time
has to be cleared also. It could be done together during
convert_ctx_access(). However, the latter patch will also expose
the skb->mono_delivery_time bit as __sk_buff->delivery_time_type.
Changing the delivery_time_type in the background may surprise
the user, e.g. the 2nd read on __sk_buff->delivery_time_type
may need a READ_ONCE() to avoid compiler optimization. Thus,
in expecting the needs in the latter patch, this patch does a
check on !skb->tstamp after running the tc-bpf and clears the
skb->mono_delivery_time bit if needed. The earlier discussion
on v4 [0].
The bpf insn rewrite requires the skb's mono_delivery_time bit and
tc_at_ingress bit. They are moved up in sk_buff so that bpf rewrite
can be done at a fixed offset. tc_skip_classify is moved together with
tc_at_ingress. To get one bit for mono_delivery_time, csum_not_inet is
moved down and this bit is currently used by sctp.
[0]: https://lore.kernel.org/bpf/20220217015043.khqwqklx45c4m4se@kafai-mbp.dhcp.thefacebook.com/
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patches handled the delivery_time in the ingress path
before the routing decision is made. This patch can postpone clearing
delivery_time in a skb until knowing it is delivered locally and also
set the (rcv) timestamp if needed. This patch moves the
skb_clear_delivery_time() from dev.c to ip_local_deliver_finish()
and ip6_input_finish().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patches handled the delivery_time before sch_handle_ingress().
This patch can now set the skb->mono_delivery_time to flag the skb->tstamp
is used as the mono delivery_time (EDT) instead of the (rcv) timestamp
and also clear it with skb_clear_delivery_time() after
sch_handle_ingress(). This will make the bpf_redirect_*()
to keep the mono delivery_time and used by a qdisc (fq) of
the egress-ing interface.
A latter patch will postpone the skb_clear_delivery_time() until the
stack learns that the skb is being delivered locally and that will
make other kernel forwarding paths (ip[6]_forward) able to keep
the delivery_time also. Thus, like the previous patches on using
the skb->mono_delivery_time bit, calling skb_clear_delivery_time()
is not limited within the CONFIG_NET_INGRESS to avoid too many code
churns among this set.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In __skb_tstamp_tx(), it may clone the egress skb and queues the clone to
the sk_error_queue. The outgoing skb may have the mono delivery_time
while the (rcv) timestamp is expected for the clone, so the
skb->mono_delivery_time bit needs to be cleared from the clone.
This patch adds the skb->mono_delivery_time clearing to the existing
__net_timestamp() and use it in __skb_tstamp_tx().
The __net_timestamp() fast path usage in dev.c is changed to directly
call ktime_get_real() since the mono_delivery_time bit is not set at
that point.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A latter patch will set the skb->mono_delivery_time to flag the skb->tstamp
is used as the mono delivery_time (EDT) instead of the (rcv) timestamp.
skb_clear_tstamp() will then keep this delivery_time during forwarding.
This patch is to make the network tapping (with af_packet) to handle
the delivery_time stored in skb->tstamp.
Regardless of tapping at the ingress or egress, the tapped skb is
received by the af_packet socket, so it is ingress to the af_packet
socket and it expects the (rcv) timestamp.
When tapping at egress, dev_queue_xmit_nit() is used. It has already
expected skb->tstamp may have delivery_time, so it does
skb_clone()+net_timestamp_set() to ensure the cloned skb has
the (rcv) timestamp before passing to the af_packet sk.
This patch only adds to clear the skb->mono_delivery_time
bit in net_timestamp_set().
When tapping at ingress, it currently expects the skb->tstamp is either 0
or the (rcv) timestamp. Meaning, the tapping at ingress path
has already expected the skb->tstamp could be 0 and it will get
the (rcv) timestamp by ktime_get_real() when needed.
There are two cases for tapping at ingress:
One case is af_packet queues the skb to its sk_receive_queue.
The skb is either not shared or new clone created. The newly
added skb_clear_delivery_time() is called to clear the
delivery_time (if any) and set the (rcv) timestamp if
needed before the skb is queued to the sk_receive_queue.
Another case, the ingress skb is directly copied to the rx_ring
and tpacket_get_timestamp() is used to get the (rcv) timestamp.
The newly added skb_tstamp() is used in tpacket_get_timestamp()
to check the skb->mono_delivery_time bit before returning skb->tstamp.
As mentioned earlier, the tapping@ingress has already expected
the skb may not have the (rcv) timestamp (because no sk has asked
for it) and has handled this case by directly calling ktime_get_real().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now, skb->tstamp is reset to 0 whenever the skb is forwarded.
If skb->tstamp has the mono delivery_time, clearing it can hurt
the performance when it finally transmits out to fq@phy-dev.
The earlier patch added a skb->mono_delivery_time bit to
flag the skb->tstamp carrying the mono delivery_time.
This patch adds skb_clear_tstamp() helper which keeps
the mono delivery_time and clears everything else.
The delivery_time clearing will be postponed until the stack knows the
skb will be delivered locally. It will be done in a latter patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. Add an attribute, IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS,
which should be carried by the RTM_SETSTATS message, and expresses a desire
to toggle L3 offload xstats on or off.
As part of the above, add an exported function rtnl_offload_xstats_notify()
that drivers can use when they have installed or deinstalled the counters
backing the HW stats.
At this point, it is possible to enable, disable and query L3 offload
xstats on netdevices. (However there is no driver actually implementing
these.)
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. These stats are only accessible through RTM_GETSTATS, and
therefore should be toggled by a RTM_SETSTATS message. Add it, and the
necessary skeleton handler.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new IFLA_STATS_LINK_OFFLOAD_XSTATS child attribute,
IFLA_OFFLOAD_XSTATS_L3_STATS, to carry statistics for traffic that takes
place in a HW router.
The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. Additionally, as a netdevice is configured, it may become or
cease being suitable for binding of a HW counter. Both of these aspects
need to be communicated to the userspace. To that end, add another child
attribute, IFLA_OFFLOAD_XSTATS_HW_S_INFO:
- attr nest IFLA_OFFLOAD_XSTATS_HW_S_INFO
- attr nest IFLA_OFFLOAD_XSTATS_L3_STATS
- attr IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST
- {0,1} as u8
- attr IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED
- {0,1} as u8
Thus this one attribute is a nest that can be used to carry information
about various types of HW statistics, and indexing is very simply done by
wrapping the information for a given statistics suite into the attribute
that carries the suite is the RTM_GETSTATS query. At the same time, because
_HW_S_INFO is nested directly below IFLA_STATS_LINK_OFFLOAD_XSTATS, it is
possible through filtering to request only the metadata about individual
statistics suites, without having to hit the HW to get the actual counters.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offloading switch device drivers may be able to collect statistics of the
traffic taking place in the HW datapath that pertains to a certain soft
netdevice, such as VLAN. Add the necessary infrastructure to allow exposing
these statistics to the offloaded netdevice in question. The API was shaped
by the following considerations:
- Collection of HW statistics is not free: there may be a finite number of
counters, and the act of counting may have a performance impact. It is
therefore necessary to allow toggling whether HW counting should be done
for any particular SW netdevice.
- As the drivers are loaded and removed, a particular device may get
offloaded and unoffloaded again. At the same time, the statistics values
need to stay monotonic (modulo the eventual 64-bit wraparound),
increasing only to reflect traffic measured in the device.
To that end, the netdevice keeps around a lazily-allocated copy of struct
rtnl_link_stats64. Device drivers then contribute to the values kept
therein at various points. Even as the driver goes away, the struct stays
around to maintain the statistics values.
- Different HW devices may be able to count different things. The
motivation behind this patch in particular is exposure of HW counters on
Nvidia Spectrum switches, where the only practical approach to counting
traffic on offloaded soft netdevices currently is to use router interface
counters, and count L3 traffic. Correspondingly that is the statistics
suite added in this patch.
Other devices may be able to measure different kinds of traffic, and for
that reason, the APIs are built to allow uniform access to different
statistics suites.
- Because soft netdevices and offloading drivers are only loosely bound, a
netdevice uses a notifier chain to communicate with the drivers. Several
new notifiers, NETDEV_OFFLOAD_XSTATS_*, have been added to carry messages
to the offloading drivers.
- Devices can have various conditions for when a particular counter is
available. As the device is configured and reconfigured, the device
offload may become or cease being suitable for counter binding. A
netdevice can use a notifier type NETDEV_OFFLOAD_XSTATS_REPORT_USED to
ping offloading drivers and determine whether anyone currently implements
a given statistics suite. This information can then be propagated to user
space.
When the driver decides to unoffload a netdevice, it can use a
newly-added function, netdev_offload_xstats_report_delta(), to record
outstanding collected statistics, before destroying the HW counter.
This patch adds a helper, call_netdevice_notifiers_info_robust(), for
dispatching a notifier with the possibility of unwind when one of the
consumers bails. Given the wish to eventually get rid of the global
notifier block altogether, this helper only invokes the per-netns notifier
block.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Obtaining stats for the IFLA_STATS_LINK_OFFLOAD_XSTATS nest involves a HW
access, and can fail for more reasons than just netlink message size
exhaustion. Therefore do not always return -EMSGSIZE on the failure path,
but respect the error code provided by the callee. Set the error explicitly
where it is reasonable to assume -EMSGSIZE as the failure reason.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Later patches add handlers for more HW-backed statistics. An extack will be
useful when communicating HW / driver errors to the client. Add the
arguments as appropriate.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The filter_mask field of RTM_GETSTATS header determines which top-level
attributes should be included in the netlink response. This saves
processing time by only including the bits that the user cares about
instead of always dumping everything. This is doubly important for
HW-backed statistics that would typically require a trip to the device to
fetch the stats.
So far there was only one HW-backed stat suite per attribute. However,
IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in
the following patches. It would therefore be advantageous to be able to
filter within that nest, and select just one or the other HW-backed
statistics suite.
Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload.
The scheme is as follows:
- RTM_GETSTATS
- struct if_stats_msg
- attr nest IFLA_STATS_GET_FILTERS
- attr IFLA_STATS_LINK_OFFLOAD_XSTATS
- u32 filter_mask
This scheme reuses the existing enumerators by nesting them in a dedicated
context attribute. This is covered by policies as usual, therefore a
gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS
nest has filtering enabled, because for the SW counters the issue does not
seem to be that important.
rtnl_offload_xstats_get_size() and _fill() are extended to observe the
requested filters.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IFLA_STATS_LINK_OFFLOAD_XSTATS attribute is a nest whose child
attributes carry various special hardware statistics. The code that handles
this nest was written with the idea that all these statistics would be
exposed by the device driver of a physical netdevice.
In the following patches, a new attribute is added to the abovementioned
nest, which however can be defined for some soft netdevices. The NDO-based
approach to querying these does not work, because it is not the soft
netdevice driver that exposes these statistics, but an offloading NIC
driver that does so.
The current code does not scale well to this usage. Simply rewrite it back
to the pattern seen in other fill-like and get_size-like functions
elsewhere.
Extract to helpers the code that is concerned with handling specifically
NDO-backed statistics so that it can be easily reused should more such
statistics be added.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The currently used names rtnl_get_offload_stats() and
rtnl_get_offload_stats_size() do not clearly show the namespace. The former
function additionally seems to have been named this way in accordance with
the NDO name, as opposed to the naming used in the rtnetlink.c file (and
indeed elsewhere in the netlink handling code). As more and
differently-flavored attributes are introduced, a common clear prefix is
needed for all related functions.
Rename the functions to follow the rtnl_offload_xstats_* naming scheme.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds a function page_pool_get_stats which can be used by drivers to obtain
stats for a specified page_pool.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add per-cpu stats tracking page pool recycling events:
- cached: recycling placed page in the page pool cache
- cache_full: page pool cache was full
- ring: page placed into the ptr ring
- ring_full: page released from page pool because the ptr ring was full
- released_refcnt: page released (and not recycled) because refcnt > 1
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add per-pool statistics counters for the allocation path of a page pool.
These stats are incremented in softirq context, so no locking or per-cpu
variables are needed.
This code is disabled by default and a kernel config option is provided for
users who wish to enable them.
The statistics added are:
- fast: successful fast path allocations
- slow: slow path order-0 allocations
- slow_high_order: slow path high order allocations
- empty: ptr ring is empty, so a slow path allocation was forced.
- refill: an allocation which triggered a refill of the cache
- waive: pages obtained from the ptr ring that cannot be added to
the cache due to a NUMA mismatch.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, sk_psock_verdict_recv() returns skb->len
This is problematic because tcp_read_sock() might have
passed orig_len < skb->len, due to the presence of TCP urgent data.
This causes an infinite loop from tcp_read_sock()
Followup patch will make tcp_read_sock() more robust vs bad actors.
Fixes: ef5659280e ("bpf, sockmap: Allow skipping sk_skb parser program")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Network drivers such as igb or igc call eth_get_headlen() to determine the
header length for their to be constructed skbs in receive path.
When running HSR on top of these drivers, it results in triggering BUG_ON() in
skb_pull(). The reason is the skb headlen is not sufficient for HSR to work
correctly. skb_pull() notices that.
For instance, eth_get_headlen() returns 14 bytes for TCP traffic over HSR which
is not correct. The problem is, the flow dissection code does not take HSR into
account. Therefore, add support for it.
Reported-by: Anthony Harivel <anthony.harivel@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220228195856.88187-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The truesize for a UDP GRO packet is added by main skb and skbs in main
skb's frag_list:
skb_gro_receive_list
p->truesize += skb->truesize;
The commit 53475c5dd8 ("net: fix use-after-free when UDP GRO with
shared fraglist") introduced a truesize increase for frag_list skbs.
When uncloning skb, it will call pskb_expand_head and trusesize for
frag_list skbs may increase. This can occur when allocators uses
__netdev_alloc_skb and not jump into __alloc_skb. This flow does not
use ksize(len) to calculate truesize while pskb_expand_head uses.
skb_segment_list
err = skb_unclone(nskb, GFP_ATOMIC);
pskb_expand_head
if (!skb->sk || skb->destructor == sock_edemux)
skb->truesize += size - osize;
If we uses increased truesize adding as delta_truesize, it will be
larger than before and even larger than previous total truesize value
if skbs in frag_list are abundant. The main skb truesize will become
smaller and even a minus value or a huge value for an unsigned int
parameter. Then the following memory check will drop this abnormal skb.
To avoid this error we should use the original truesize to segment the
main skb.
Fixes: 53475c5dd8 ("net: fix use-after-free when UDP GRO with shared fraglist")
Signed-off-by: lena wang <lena.wang@mediatek.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1646133431-8948-1-git-send-email-lena.wang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both rps_sock_flow_sysctl() and flow_limit_cpu_sysctl()
are using synchronize_rcu() right before freeing memory
either by vfree() or kfree()
They can switch to kvfree_rcu(ptr) and kfree_rcu(ptr) to benefit
from asynchronous mode, instead of blocking the current thread.
Note that kvfree_rcu(ptr) and kfree_rcu(ptr) eventually can
have to use synchronize_rcu() in some memory pressure cases.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in __neigh_event_send() with
kfree_skb_reason(). Following drop reasons are added:
SKB_DROP_REASON_NEIGH_FAILED
SKB_DROP_REASON_NEIGH_QUEUEFULL
SKB_DROP_REASON_NEIGH_DEAD
The first two reasons above should be the hot path that skb drops
in neighbour subsystem.
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
