The addition of the flags member to etnaviv_gem_submit structure didn't
take into account that the last member of this structure is a variable
length array.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
If we bail out of the submit before actually adding the cmdstream
to the kernel ring there is no valid fence to put. Make sure to skip
the fence_put in that case.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Some nouveau regression fixes.
* 'linux-4.12' of git://github.com/skeggsb/linux:
drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection
drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr()
drm/nouveau/kms: Increase max retries in scanout position queries.
drm/nouveau/bios/bitP: check that table is long enough for optional pointers
drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
A missing u64 cast causes a 32-Bit wraparound from
4096 MiB to 0 MiB and therefore total 0 MiB VRAM detected
if card has 4096 Mib per FBP.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The error return code PTR_ERR(mc) is always 0 since mc is
equal to 0 in this error handling case.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
So far we only allowed for 1 retry and just failed the query
- and thereby high precision vblank timestamping - if we did
not get a reasonable result, as such a failure wasn't considered
all too horrible. There are a few NVidia gpu models out there which
may need a bit more than 1 retry to get a successful query result
under some conditions.
Since Linux 4.4 the update code for vblank counter and timestamp
in drm_update_vblank_count() changed so that the implementation
assumes that high precision vblank timestamping of a kms driver
either consistently succeeds or consistently fails for a given
video mode and encoder/connector combo. Iow. switching from success
to fail or vice versa on a modeset or connector change is ok, but
spurious temporary failure for a given setup can confuse the core
code and potentially cause bad miscounting of vblanks and confusion
or hangs in userspace clients which rely on vblank stuff, e.g.,
desktop compositors.
Therefore change the max retry count to a larger number - more than
any gpu so far is known to need to succeed, but still low enough
so that these queries which do also happen in vblank interrupt are
still fast enough to be not disastrously long if something would
go badly wrong with them.
As such sporadic retries only happen seldom even on affected gpu's,
this could mean a vblank irq could take a few dozen microseconds
longer every few hours of uptime -- better than a desktop compositor
randomly hanging every couple of hours or days of uptime in a hard
to reproduce manner.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm/i915 and gvt fixes for drm-next/v4.12
* tag 'drm-intel-next-fixes-2017-04-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Confirm the request is still active before adding it to the await
drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio
drm/i915/selftests: Allocate inode/file dynamically
drm/i915: Fix system hang with EI UP masked on Haswell
drm/i915: checking for NULL instead of IS_ERR() in mock selftests
drm/i915: Perform link quality check unconditionally during long pulse
drm/i915: Fix use after free in lpe_audio_platdev_destroy()
drm/i915: Use the right mapping_gfp_mask for final shmem allocation
drm/i915: Make legacy cursor updates more unsynced
drm/i915: Apply a cond_resched() to the saturated signaler
drm/i915: Park the signaler before sleeping
drm/i915/gvt: fix a bounds check in ring_id_to_context_switch_event()
drm/i915/gvt: Fix PTE write flush for taking runtime pm properly
drm/i915/gvt: remove some debug messages in scheduler timer handler
drm/i915/gvt: add mmio init for virtual display
drm/i915/gvt: use directly assignment for structure copying
drm/i915/gvt: remove redundant ring id check which cause significant CPU misprediction
drm/i915/gvt: remove redundant platform check for mocs load/restore
drm/i915/gvt: Align render mmio list to cacheline
drm/i915/gvt: cleanup some too chatty scheduler message
On 32-bit machines, we can't divide 64-bit integers:
drivers/gpu/drm/arm/malidp_crtc.o: In function `malidp_crtc_atomic_check':
malidp_crtc.c:(.text.malidp_crtc_atomic_check+0x3c0): undefined reference to `__aeabi_uldivmod'
malidp_crtc.c:(.text.malidp_crtc_atomic_check+0x3dc): undefined reference to `__aeabi_uldivmod'
This calls the div_u64 function explicitly instead.
Fixes: 4cea4e9f6690 ("drm: mali-dp: Add plane upscaling support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Avoid having too large a stack by creating the fake struct inode/file on
the heap instead.
drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file':
drivers/gpu/drm/i915/selftests/mock_drm.c:46:1: error: the frame size of 1328 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file_free':
drivers/gpu/drm/i915/selftests/mock_drm.c:54:1: error: the frame size of 1312 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 66d9cb5d80 ("drm/i915: Mock the GEM device for self-testing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419094143.16922-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 2310b3c952)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Previously with commit a9c1f90c8e
("drm/i915: Don't mask EI UP interrupt on IVB|SNB") certain,
seemingly unrelated bit (GEN6_PM_RP_UP_EI_EXPIRED) was needed
to be unmasked for IVB and SNB in order to prevent system hang
with chained batchbuffers.
Our CI was seeing incomplete results with tests that used
chained batches and it was found out that HSW needs to have this
same bit unmasked to reliably survive chained batches.
Always unmask GEN6_PM_RP_UP_EI_EXPIRED on Haswell to
prevent system hang with batch chaining.
Testcase: igt/gem_exec_fence/nb-await-default
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100672
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1492082127-29007-1-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 3396a27385)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
i915_gem_request_alloc() uses error pointers. It never returns NULLs.
Fixes: 0daf0113cf ("drm/i915: Mock infrastructure for request emission")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413195217.GA26108@mwanda
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit be02f75564)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Apparently some DP sinks are a little nuts and cause HPD to drop
intermittently during modesets. This happens eg. on an ASUS PB287Q.
In oder to recover from this we can't really use the previous
connector status to determine if the link needs retraining, so let's
just ignore that piece of information and do the retrain
unconditionally. We do of course still check whether the link is
supposed to be running or not.
To actually get read out the EDID and update things properly we
also need to nuke the goto out added by commit 7d23e3c37b
("drm/i915: Cleaning up intel_dp_hpd_pulse"). I'm actually not sure
why that was there. Perhaps to avoid an EDID read if the connector
status didn't appear to change, but that sort of thing is quite racy
and would have failed anyway if we failed to keep up with the
hotplugs (if we missed the HPD down in between two HPD ups). And
now that we take this codepath unconditionally we definitely need
to drop the goto as otherwise we would never do the EDID read.
v2: Drop the goto that made us skip EDID reads entirely. Doh!
v3: Rebase due to locking changes
s/apparely/apparently/ in the comment (Chris)
Cc: stable@vger.kernel.org
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reported-by: Palmer Dabbelt <palmer@dabbelt.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99766
References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/119779.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412193017.21029-1-ville.syrjala@linux.intel.com
(cherry picked from commit 1a36147bb9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Many sightings report the greater prevalence of allocation failures.
This is all due to the incorrect use of mapping_gfp_constraint(), so
remove it in favour of just querying the mapping_gfp_mask() which are
the exact gfp_t we wanted in the first place.
We still do expect a higher chance of reporting ENOMEM, as that is the
intention of using __GFP_NORETRY -- to fail rather than oom after having
reclaimed from our bo caches, and having done a direct|kswapd reclaim
pass.
Reported-by: Jason Ekstrand <jason.ekstrand@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100594
Fixes: 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170405221514.23251-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit b268d9fe0f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We're clearing the legacy_cursor_update flag before calling
drm_atomic_helper_setup_commit() which means the helper will
wait for the flip to complete before cleaning up the framebuffers.
That's not what we want for the legacy cursor, so let's clear
the flag after setting up the commit.
Also toss in a FIXME about solving these problems in a nicer
way using the fabled vblank workers.
v2: Also unsync with legacy page flips
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Rafael Ristovski <rafael.ristovski@gmail.com>
Fixes: a5509abda4 ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329142123.5923-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 8952030440)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the engine is continually completing nops, we can saturate the
signaler and keep it working indefinitely. This angers the NMI watchdog!
A good example is to disable semaphores on snb and run igt/gem_exec_nop -
the parallel, multi-engine workloads are more than sufficient to hog the
CPU, preventing the system from even processing ICMP echo replies.
v2: Tvrtko dug into cond_resched() on x86 and found that it only
depended upon preempt_count and not tif_need_resched() - which means
that we would always call schedule() at that point.
Fixes: c81d46138d ("drm/i915: Convert trace-irq to the breadcrumb waiter")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404120531.10737-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit a7980a640c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the signal to park arrives before we sleep, then we need to check
kthread_should_park() before sleeping to avoid missing the signal.
Otherwise, if the signal arrives whilst we are processing completed
requests, we will reset the current->state back to TASK_INTERRUPTIBLE
and so miss the wakeup.
Fixes: fe3288b5da ("drm/i915: Park the breadcrumbs signaler across a GPU reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403105124.8969-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit b1becb8826)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
gvt-next-fixes-2017-04-20
- some code optimization from Changbin
- debug message cleanup after QoS merge
- misc fixes for display mmio init, reset vgpu warning, etc.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When downscaling, mclk needs to be sufficiently higher than pxlclk in
order to be able to fetch the higher-resolution data and produce output
pixels. When not scaling, or when upscaling, mclk can be equal to
pxlclk. Since the driver doesn't control mclk, just ensure that the
requirement is satisfied with the current clock rate.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Apply image enhacement when we are upscaling by a factor of 2
or more in either direction.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Enable the scaling engine for upscaling a single plane using the polyphase
scaler. No image enhancement support or downscaling yet*, and composition
result scaling is not implemented.
* Downscaling a plane requires mclk > pxlclk.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Add a core_id file in the driver's sysfs directory,
exposing the hardware CORE ID. This is useful to allow
userspace to discover the hardware version used.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
All DPs have a COLORADJ matrix which is applied prior to output gamma.
Attach that to the CTM property. Also, ensure the input CTM's coefficients
can fit in the DP registers' Q3.12 format.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Add gamma via the DRM GAMMA_LUT/GAMMA_LUT_SIZE CRTC
properties. The expected LUT size is 4096 in order
to produce as accurate a set of segments as possible.
This version uses only the green channel's gamma curve
to set the hardware curve on DP550/650. For the sake of
simplicity, it uses the same table of coefficients for
all 3 curves on DP500.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Add a custom CRTC state struct to enable storing driver's private
state. This patch only adds the base drm_crtc_state struct and
the atomic functions that handle it.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Now that we are using a custom plane state in mali-dp, we need a
bespoke reset that takes into account the larger structure.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[Updated commit message]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
The newly introduced function causes a harmless build warning:
drivers/gpu/drm/arm/malidp_planes.c: In function 'malidp_plane_atomic_print_state':
drivers/gpu/drm/arm/malidp_planes.c:98:23: error: unused variable 'mp' [-Werror=unused-variable]
The variable serves no purpose here and can be removed.
Fixes: 242f43b69c61 ("drm: mali-dp: add atomic_print_state for planes")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Add function to dump the state of the plane.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Enable runtime and system Power Management. Clocks are now managed
from malidp_crtc_{enable,disable} functions. Suspend-to-RAM tested
as working on Juno.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Mali DP needs to have all the planes that are becoming inactive in the
new state disabled before re-enabling the active CRTC, otherwise we
start streaming out data from old pointers in memory.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Change "S_IRUSR | S_IWUSR" to "0600", it's easier to parse mentally.
This change should be part of commit 50f837371d ("drm/vmwgfx: Revert
"drm/vmwgfx: Replace numeric parameter like 0444 with macro""), but the
patch was truncated somewhere in the patch route, so add the missing
change. Extract from the original commit message:
commit 50f837371d
Author: Øyvind A. Holm <sunny@sunbase.org>
Date: Thu Mar 23 14:54:48 2017 -0700
drm/vmwgfx: Revert "drm/vmwgfx: Replace numeric parameter like 0444
with macro"
This reverts commit 2d8e60e8b0 ("drm/vmwgfx: Replace numeric
parameter like 0444 with macro")
The commit belongs to the series of 1285 patches sent to LKML on
2016-08-02, it changes the representation of file permissions from
the octal value "0600" to "S_IRUSR | S_IWUSR".
The general consensus was that the changes does not increase
readability, quite the opposite; 0600 is easier to parse mentally
than S_IRUSR | S_IWUSR.
Signed-off-by: Øyvind A. Holm <sunny@sunbase.org>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
drm-misc-next-fixes-2017-04-20
Core changes:
- Maintain sti via drm-misc (Vincent)
- Rename dma_buf_ops->kmap_* to avoid naming collision (Logan)
Driver changes:
- Fix UHD displays on stih407 (Vincent)
- Fix uninitialized var return in atmel-hlcdc (Dan)
* tag 'drm-misc-next-fixes-2017-04-20' of git://anongit.freedesktop.org/git/drm-misc:
dma-buf: Rename dma-ops to prevent conflict with kunmap_atomic macro
drm: atmel-hlcdc: Uninitialized return in atmel_hlcdc_create_outputs()
drm/sti: fix GDP size to support up to UHD resolution
MAINTAINERS: add drm/sti driver into drm-misc
Seeing the kunmap_atomic dma_buf_ops share the same name with a macro
in highmem.h, the former can be aliased if any dma-buf user includes
that header.
I'm personally trying to include highmem.h inside scatterlist.h and this
breaks the dma-buf code proper.
Christoph Hellwig suggested [1] renaming it and pushing this patch ASAP.
To maintain consistency I've renamed all four of kmap* and kunmap* to be
map* and unmap*. (Even though only kmap_atomic presently conflicts.)
[1] https://www.spinics.net/lists/target-devel/msg15070.html
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1492630570-879-1-git-send-email-logang@deltatee.com
Not any functional changes, but a lot of preliminary rework in order to
support multiple display pipelines.
-----BEGIN PGP SIGNATURE-----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=XlmY
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM changes for 4.12
Not any functional changes, but a lot of preliminary rework in order to
support multiple display pipelines.
* tag 'sunxi-drm-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (26 commits)
MAINTAINERS: Add sun4i-drm git repo
drm/sun4i: Pass pointer for underlying backend into layer init
drm/sun4i: Pass pointers for associated backend and tcon into crtc init
drm/sun4i: tv: Get tcon and backend pointers from associated crtc
drm/sun4i: Use embedded tcon pointer to get the tcon's output port node
drm/sun4i: Fix tcon channel 0 comment about backporch = backporch + hsync
drm/sun4i: Fix TCON clock and regmap initialization sequence
drm/sun4i: Grab reserved memory region
drm/sun4i: Add backend and tcon pointers to sun4i_crtc
drm/sun4i: Add backend pointer to sun4i_layer
drm/sun4i: rgb: Pass tcon pointer when initializing RGB encoder
drm/sun4i: tv: Switch to drm_of_find_possible_crtcs
drm/sun4i: Drop hardcoded .possible_crtcs values from layers
drm/sun4i: Drop primary layer pointer from sun4i_drv
drm/sun4i: Initialize crtc from tcon bind function
drm/sun4i: Move layers from sun4i_drv to sun4i_crtc
drm/sun4i: Add end of list element for sun4i_layers_init's returned list
drm/sun4i: Set drm_crtc.port to the underlying TCON's output port node
drm/sun4i: Make sunxi_rgb2yuv_coef constant
drm/sun4i: Make sun4i_crtc_init return ERR_PTR style error codes
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY881cAAoJEHm+PkMAQRiGG4UH+wa2z6Qet36Uc4nXFZuSMYrO
ErUWs1QpTDDv4a+LE4fgyMvM3j9XqtpfQLy1n70jfD14IqPBhHe4gytasAf+8lg1
YvddFx0Yl3sygVu3dDBNigWeVDbfwepW59coN0vI5nrMo+wrei8aVIWcFKOxdMuO
n72u9vuhrkEnLJuQk7SF+t4OQob9McXE3s7QgyRopmlKhKo7mh8On7K2BRI5uluL
t0j5kZM0a43EUT5rq9xR8f5pgtyfTMG/FO2MuzZn43MJcZcyfmnOP/cTSIvAKA5U
1i12lxlokYhURNUe+S6jm8A47TrqSRSJxaQJZRlfGJksZ0LJa8eUaLDCviBQEoE=
=6QWZ
-----END PGP SIGNATURE-----
Merge tag 'v4.11-rc7' into drm-next
Backmerge Linux 4.11-rc7 from Linus tree, to fix some
conflicts that were causing problems with the rerere cache
in drm-tip.
It's not possible for endpoint to be zero so the test doesn't work. If
we break on the first iteration through the loop then endpoint is 1 and
"ret" is uninitialized.
Fixes: ebc9446135 ("drm: convert drivers to use drm_of_find_panel_or_bridge")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170415192142.GA6416@mwanda
There are two bugs here. The && should be || and the > is off by one so
it should be >= ARRAY_SIZE().
Fixes: 8453d674ae ("drm/i915/gvt: vGPU execlist virtualization")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
As those debug messages might appear in every timer call for scheduler,
it's too noisy, eat too much log and aren't meaningful. So remove them.
Cc: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
GP107 modesetting support (just recognising the chipset, no other changes until 4.12)
a couple of regression fixes, one of them a rather serious double-free issue that appeared in 4.10.
* 'linux-4.11' of git://github.com/skeggsb/linux:
drm/nouveau: initial support (display-only) for GP107
drm/nouveau/kms/nv50: fix double dma_fence_put() when destroying plane state
drm/nouveau/kms/nv50: fix setting of HeadSetRasterVertBlankDmi method
drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 one
drm/nouveau/mpeg: mthd returns true on success now
drm/i915 fixes for v4.11-rc7
one rcu related fix, and a few GVT fixes.
* tag 'drm-intel-fixes-2017-04-12' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Don't call synchronize_rcu_expedited under struct_mutex
drm/i915: Suspend GuC prior to GPU Reset during GEM suspend
drm/i915/gvt: set the correct default value of CTX STATUS PTR
drm/i915/gvt: Fix firmware loading interface for GVT-g golden HW state
drm/i915: Use a dummy timeline name for a signaled fence
drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex
drm/i915/gvt: remove the redundant info NULL check
drm/i915/gvt: adjust mem size for low resolution type
drm/i915: Avoid lock dropping between rescheduling
drm/i915/gvt: exclude cfg space from failsafe mode
drm/i915/gvt: Activate/de-activate vGPU in mdev ops.
drm/i915/execlists: Wrap tail pointer after reset tweaking
drm/i915/perf: remove user triggerable warn
drm/i915/perf: destroy stream on sample_flags mismatch
drm/i915: Align "unfenced" tiled access on gen2, early gen3
This contains two new drivers for a Sitronix and a Samsung panel as well
as two new panels supported by the panel-simple driver.
-----BEGIN PGP SIGNATURE-----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=zAVl
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.12-rc1
This contains two new drivers for a Sitronix and a Samsung panel as well
as two new panels supported by the panel-simple driver.
* tag 'drm/panel/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/panel: simple: Add support for Winstar WF35LTIACD
devicetree: add vendor prefix for Winstar Display Corp.
drm/panel: Add driver for sitronix ST7789V LCD controller
dt-bindings: display: panel: Add bindings for the Sitronix ST7789V panel
drm/panel: Add support for S6E3HA2 panel driver on TM2 board
dt-bindings: Add support for Samsung s6e3ha2 panel binding
drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H
dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel
