I made the actual CPU bringup go nice and fast... and then Linux spends
half a minute printing stupid nonsense about clocks and steal time for
each of 256 vCPUs. Don't do that. Nobody cares.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211209150938.3518-12-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM retires a guest branch instruction through emulation,
increment any vPMCs that are configured to monitor "branch
instructions retired," and update the sample period of those counters
so that they will overflow at the right time.
Signed-off-by: Eric Hankland <ehankland@google.com>
[jmattson:
- Split the code to increment "branch instructions retired" into a
separate commit.
- Moved/consolidated the calls to kvm_pmu_trigger_event() in the
emulation of VMLAUNCH/VMRESUME to accommodate the evolution of
that code.
]
Fixes: f5132b0138 ("KVM: Expose a version 2 architectural PMU to a guests")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20211130074221.93635-7-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM retires a guest instruction through emulation, increment any
vPMCs that are configured to monitor "instructions retired," and
update the sample period of those counters so that they will overflow
at the right time.
Signed-off-by: Eric Hankland <ehankland@google.com>
[jmattson:
- Split the code to increment "branch instructions retired" into a
separate commit.
- Added 'static' to kvm_pmu_incr_counter() definition.
- Modified kvm_pmu_incr_counter() to check pmc->perf_event->state ==
PERF_EVENT_STATE_ACTIVE.
]
Fixes: f5132b0138 ("KVM: Expose a version 2 architectural PMU to a guests")
Signed-off-by: Jim Mattson <jmattson@google.com>
[likexu:
- Drop checks for pmc->perf_event or event state or event type
- Increase a counter once its umask bits and the first 8 select bits are matched
- Rewrite kvm_pmu_incr_counter() with a less invasive approach to the host perf;
- Rename kvm_pmu_record_event to kvm_pmu_trigger_event;
- Add counter enable and CPL check for kvm_pmu_trigger_event();
]
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20211130074221.93635-6-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Depending on whether intr should be triggered or not, KVM registers
two different event overflow callbacks in the perf_event context.
The code skeleton of these two functions is very similar, so
the pmc->intr can be stored into pmc from pmc_reprogram_counter()
which provides smaller instructions footprint against the
u-architecture branch predictor.
The __kvm_perf_overflow() can be called in non-nmi contexts
and a flag is needed to distinguish the caller context and thus
avoid a check on kvm_is_in_guest(), otherwise we might get
warnings from suspicious RCU or check_preemption_disabled().
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20211130074221.93635-5-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we set the same semantic event value for the fixed counter in
pmc->eventsel, returning the perf_hw_id for the fixed counter via
find_fixed_event() can be painlessly replaced by pmc_perf_hw_id()
with the help of pmc_is_fixed() check.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20211130074221.93635-4-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The find_arch_event() returns a "unsigned int" value,
which is used by the pmc_reprogram_counter() to
program a PERF_TYPE_HARDWARE type perf_event.
The returned value is actually the kernel defined generic
perf_hw_id, let's rename it to pmc_perf_hw_id() with simpler
incoming parameters for better self-explanation.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20211130074221.93635-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current pmc->eventsel for fixed counter is underutilised. The
pmc->eventsel can be setup for all known available fixed counters
since we have mapping between fixed pmc index and
the intel_arch_events array.
Either gp or fixed counter, it will simplify the later checks for
consistency between eventsel and perf_hw_id.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20211130074221.93635-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because IceLake has 4 fixed performance counters but KVM only
supports 3, it is possible for reprogram_fixed_counters to pass
to reprogram_fixed_counter an index that is out of bounds for the
fixed_pmc_events array.
Ultimately intel_find_fixed_event, which is the only place that uses
fixed_pmc_events, handles this correctly because it checks against the
size of fixed_pmc_events anyway. Every other place operates on the
fixed_counters[] array which is sized according to INTEL_PMC_MAX_FIXED.
However, it is cleaner if the unsupported performance counters are culled
early on in reprogram_fixed_counters.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When !CR0_PG -> CR0_PG, vcpu->arch.cr3 becomes active, but GUEST_CR3 is
still vmx->ept_identity_map_addr if EPT + !URG. So VCPU_EXREG_CR3 is
considered to be dirty and GUEST_CR3 needs to be updated in this case.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211216021938.11752-4-jiangshanlai@gmail.com>
Fixes: c62c7bd4f9 ("KVM: VMX: Update vmcs.GUEST_CR3 only when the guest CR3 is dirty")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For shadow paging, the page table needs to be reconstructed before the
coming VMENTER if the guest PDPTEs is changed.
But not all paths that call load_pdptrs() will cause the page tables to be
reconstructed. Normally, kvm_mmu_reset_context() and kvm_mmu_free_roots()
are used to launch later reconstruction.
The commit d81135a57aa6("KVM: x86: do not reset mmu if CR0.CD and
CR0.NW are changed") skips kvm_mmu_reset_context() after load_pdptrs()
when changing CR0.CD and CR0.NW.
The commit 21823fbda552("KVM: x86: Invalidate all PGDs for the current
PCID on MOV CR3 w/ flush") skips kvm_mmu_free_roots() after
load_pdptrs() when rewriting the CR3 with the same value.
The commit a91a7c709600("KVM: X86: Don't reset mmu context when
toggling X86_CR4_PGE") skips kvm_mmu_reset_context() after
load_pdptrs() when changing CR4.PGE.
Guests like linux would keep the PDPTEs unchanged for every instance of
pagetable, so this missing reconstruction has no problem for linux
guests.
Fixes: d81135a57aa6("KVM: x86: do not reset mmu if CR0.CD and CR0.NW are changed")
Fixes: 21823fbda552("KVM: x86: Invalidate all PGDs for the current PCID on MOV CR3 w/ flush")
Fixes: a91a7c709600("KVM: X86: Don't reset mmu context when toggling X86_CR4_PGE")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211216021938.11752-3-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The host CR3 in the vcpu thread can only be changed when scheduling,
so commit 15ad9762d6 ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()")
changed vmx.c to only save it in vmx_prepare_switch_to_guest().
However, it also has to be synced in vmx_sync_vmcs_host_state() when switching VMCS.
vmx_set_host_fs_gs() is called in both places, so rename it to
vmx_set_vmcs_host_state() and make it update HOST_CR3.
Fixes: 15ad9762d6 ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211216021938.11752-2-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 24cd19a28c.
Sean Christopherson reports:
"Commit 24cd19a28c ('KVM: X86: Update mmu->pdptrs only when it is
changed') breaks nested VMs with EPT in L0 and PAE shadow paging in L2.
Reproducing is trivial, just disable EPT in L1 and run a VM. I haven't
investigating how it breaks things."
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add tests to confirm mirror vms can only run correct subset of commands.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-4-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TEST_ASSERT in SEV ioctl was allowing errors because it checked return
value was good OR the FW error code was OK. This TEST_ASSERT should
require both (aka. AND) values are OK. Removes the LAUNCH_START from the
mirror VM because this call correctly fails because mirror VMs cannot
call this command. Currently issues with the PSP driver functions mean
the firmware error is not always reset to SEV_RET_SUCCESS when a call is
successful. Mainly sev_platform_init() doesn't correctly set the fw
error if the platform has already been initialized.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-3-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mirrors should not be able to call LAUNCH_START. Remove the call on the
mirror to correct the test before fixing sev_ioctl() to correctly assert
on this failed ioctl.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20211208191642.3792819-2-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
-----BEGIN PGP SIGNATURE-----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=Ao1E
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-5.17-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 5.17, take #1
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
-----BEGIN PGP SIGNATURE-----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=HkZk
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
I am no longer work at Western Digital so update my email address to
personal one and add entries to .mailmap as well.
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Atish Patra <atishp@rivosinc.com>
When the last VM is terminated, the host kernel will invoke function
hardware_disable_nolock() on each CPU to disable the related virtualization
functions. Here, RISC-V currently only clears hideleg CSR and hedeleg CSR.
This behavior will cause the host kernel to receive spurious interrupts if
hvip CSR has pending interrupts and the corresponding enable bits in vsie
CSR are asserted. To avoid it, hvip CSR and vsie CSR must be cleared
before clearing hideleg CSR.
Fixes: 99cdc6c18c ("RISC-V: Add initial skeletal KVM support")
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
We add initial support for RISC-V 64-bit in KVM selftests using
which we can cross-compile and run arch independent tests such as:
demand_paging_test
dirty_log_test
kvm_create_max_vcpus,
kvm_page_table_test
set_memory_region_test
kvm_binary_stats_test
All VM guest modes defined in kvm_util.h require at least 48-bit
guest virtual address so to use KVM RISC-V selftests hardware
need to support at least Sv48 MMU for guest (i.e. VS-mode).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
We add EXTRA_CFLAGS to the common CFLAGS of top-level Makefile which will
allow users to pass additional compile-time flags such as "-static".
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-and-tested-by: Sean Christopherson <seanjc@google.com>
The number of GPA bits supported for a RISC-V Guest/VM is based on the
MMU mode used by the G-stage translation. The KVM RISC-V will detect and
use the best possible MMU mode for the G-stage in kvm_arch_init().
We add a generic VM capability KVM_CAP_VM_GPA_BITS which can be used by
the KVM userspace to get the number of GPA (guest physical address) bits
supported for a Guest/VM.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
The SBI experimental extension space is for temporary (or experimental)
stuff whereas SBI vendor extension space is for hardware vendor specific
stuff. Both these SBI extension spaces won't be standardized by the SBI
specification so let's blindly forward such SBI calls to the userspace.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
There are no users outside vcpu_fp.c so make kvm_riscv_vcpu_fp_clean()
static.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
I am no longer employed by western digital. Update my email address to
personal one and add entries to .mailmap as well.
Signed-off-by: Atish Patra <atishp@atishpatra.org>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
SBI HSM extension allows OS to start/stop harts any time. It also allows
ordered booting of harts instead of random booting.
Implement SBI HSM exntesion and designate the vcpu 0 as the boot vcpu id.
All other non-zero non-booting vcpus should be brought up by the OS
implementing HSM extension. If the guest OS doesn't implement HSM
extension, only single vcpu will be available to OS.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The SBI v0.2 contains some of the improved versions of required v0.1
extensions such as remote fence, timer and IPI.
This patch implements those extensions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
SBI v0.2 base extension defined to allow backward compatibility and
probing of future extensions. This is also the only mandatory SBI
extension that must be implemented by SBI implementors.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
With SBI v0.2, there may be more SBI extensions in future. It makes more
sense to group related extensions in separate files. Guest kernel will
choose appropriate SBI version dynamically.
Move the existing implementation to a separate file so that it can be
removed in future without much conflict.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The existing SBI specification impelementation follows v0.1
specification. The latest specification allows more scalability
and performance improvements.
Rename the existing implementation as v0.1 and provide a way
to allow future extensions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Use common KVM's implementation of the MMU memory caches, which for all
intents and purposes is semantically identical to RISC-V's version, the
only difference being that the common implementation will fall back to an
atomic allocation if there's a KVM bug that triggers a cache underflow.
RISC-V appears to have based its MMU code on arm64 before the conversion
to the common caches in commit c1a33aebe9 ("KVM: arm64: Use common KVM
implementation of MMU memory caches"), despite having also copy-pasted
the definition of KVM_ARCH_NR_OBJS_PER_MEMORY_CACHE in kvm_types.h.
Opportunistically drop the superfluous wrapper
kvm_riscv_stage2_flush_cache(), whose name is very, very confusing as
"cache flush" in the context of MMU code almost always refers to flushing
hardware caches, not freeing unused software objects.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
arm_vgic.h does not require all the stuff that kernel.h provides.
Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220104151940.55399-1-andriy.shevchenko@linux.intel.com
* kvm-arm64/selftest/irq-injection:
: .
: New tests from Ricardo Koller:
: "This series adds a new test, aarch64/vgic-irq, that validates the injection of
: different types of IRQs from userspace using various methods and configurations"
: .
KVM: selftests: aarch64: Add test for restoring active IRQs
KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irq
KVM: selftests: aarch64: Add tests for IRQFD in vgic_irq
KVM: selftests: Add IRQ GSI routing library functions
KVM: selftests: aarch64: Add test_inject_fail to vgic_irq
KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irq
KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irq
KVM: selftests: aarch64: Add preemption tests in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq test
KVM: selftests: aarch64: Abstract the injection functions in vgic_irq
KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injection
KVM: selftests: aarch64: Add vGIC library functions to deal with vIRQ state
KVM: selftests: Add kvm_irq_line library function
KVM: selftests: aarch64: Add GICv3 register accessor library functions
KVM: selftests: aarch64: Add function for accessing GICv3 dist and redist registers
KVM: selftests: aarch64: Move gic_v3.h to shared headers
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/selftest/ipa:
: .
: Expand the KVM/arm64 selftest infrastructure to discover
: supported page sizes at runtime, support 16kB pages, and
: find out about the original M1 stupidly small IPA space.
: .
KVM: selftests: arm64: Add support for various modes with 16kB page size
KVM: selftests: arm64: Add support for VM_MODE_P36V48_{4K,64K}
KVM: selftests: arm64: Rework TCR_EL1 configuration
KVM: selftests: arm64: Check for supported page sizes
KVM: selftests: arm64: Introduce a variable default IPA size
KVM: selftests: arm64: Initialise default guest mode at test startup time
Signed-off-by: Marc Zyngier <maz@kernel.org>
kvm_arm_init_arch_resources() was renamed to kvm_arm_init_sve() in
commit a3be836df7 ("KVM: arm/arm64: Demote
kvm_arm_init_arch_resources() to just set up SVE"). Fix the function
name in comment of kvm_vcpu_finalize_sve().
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211230141535.1389-1-yuzenghui@huawei.com
The get-reg-list test ignores the Pointer Authentication features,
which is a shame now that we have relatively common HW with this feature.
Define two new configurations (with and without PMU) that exercise the
KVM capabilities.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211228121414.1013250-1-maz@kernel.org
Add a test that restores multiple IRQs in active state, it does it by
writing into ISACTIVER from the guest and using KVM ioctls. This test
tries to emulate what would happen during a live migration: restore
active IRQs.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-18-ricarkol@google.com
Add injection tests that use writing into the ISPENDR register (to mark
IRQs as pending). This is typically used by migration code.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-17-ricarkol@google.com
Add an architecture independent wrapper function for creating and
writing IRQ GSI routing tables. Also add a function to add irqchip
entries.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-15-ricarkol@google.com
Add tests for failed injections to vgic_irq. This tests that KVM can
handle bogus IRQ numbers.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-14-ricarkol@google.com
Add injection tests for the LEVEL_INFO ioctl (level-sensitive specific)
into vgic_irq.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-13-ricarkol@google.com
Add a cmdline arg for using level-sensitive interrupts (vs the default
edge-triggered). Then move the handler into a generic handler function
that takes the type of interrupt (level vs. edge) as an arg. When
handling line-sensitive interrupts it sets the line to low after
acknowledging the IRQ.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-12-ricarkol@google.com
Add tests for IRQ preemption (having more than one activated IRQ at the
same time). This test injects multiple concurrent IRQs and handles them
without handling the actual exceptions. This is done by masking
interrupts for the whole test.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-11-ricarkol@google.com
Add a new cmdline arg to set the EOI mode for all vgic_irq tests. This
specifies whether a write to EOIR will deactivate IRQs or not.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-10-ricarkol@google.com
Add the ability to specify the number of vIRQs exposed by KVM (arg
defaults to 64). Then extend the KVM_IRQ_LINE test by injecting all
available SPIs at once (specified by the nr-irqs arg). As a bonus,
inject all SGIs at once as well.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-9-ricarkol@google.com
Build an abstraction around the injection functions, so the preparation
and checking around the actual injection can be shared between tests.
All functions are stored as pointers in arrays of kvm_inject_desc's
which include the pointer and what kind of interrupts they can inject.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-8-ricarkol@google.com
Add a new KVM selftest, vgic_irq, for testing userspace IRQ injection. This
particular test injects an SPI using KVM_IRQ_LINE on GICv3 and verifies
that the IRQ is handled in the guest. The next commits will add more
types of IRQs and different modes.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-7-ricarkol@google.com
Add a set of library functions for userspace code in selftests to deal
with vIRQ state (i.e., ioctl wrappers).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-6-ricarkol@google.com
