cc_pm_suspend() and cc_pm_resume() are not used outside
drivers/crypto/ccree/cc_pm.c.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If CONFIG_PM=y, cc_pm_is_dev_suspended() is just a wrapper around
pm_runtime_suspended().
If CONFIG_PM=n, cc_pm_is_dev_suspended() a dummy that behaves exactly
the same as the dummy for pm_runtime_suspended().
Hence remove cc_pm_is_dev_suspended(), and call pm_runtime_suspended()
directly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the driver is probed, it means a match was found in
arm_ccree_dev_of_match[]. Hence we can just use the
of_device_get_match_data() helper.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, a large part of the probe function runs before Runtime PM is
enabled. As the driver manages the device's clock manually, this may
work fine on some systems, but may break on platforms with a more
complex power hierarchy.
Fix this by moving the initialization of Runtime PM before the first
register access (in cc_wait_for_reset_completion()), and putting the
device to sleep only after the last access (in cc_set_ree_fips_status()).
This allows to remove the pm_on flag, which was used to track manually
if Runtime PM had been enabled or not.
Remove the cc_pm_{init,go,fini}() wrappers, as they are called only
once, and obscure operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SRAM addresses are small integer offsets into local SRAM. Currently
they are stored using a mixture of cc_sram_addr_t (u64), u32, and
dma_addr_t types.
Settle on u32, and remove the cc_sram_addr_t typedefs.
This allows to drop several casts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SRAM allocator does not support deallocating memory.
Hence remove all references to freeing SRAM.
Fix grammar while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While the larval digest addresses are not always used in
cc_get_plain_hmac_key() and cc_hash_digest(), they are always
calculated.
Defer their calculations to the points where needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the existing lower_32_bits() and upper_32_bits() macros instead of
explicit casts and shifts to split a 64-bit address in its two 32-bit
parts.
Drop the superfluous cast to "u16", as the FIELD_PREP() macro already
masks it to the specified field width.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
mlli_params.mlli_virt_addr is just a buffer of memory.
This allows to drop a cast.
No change in generated code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_clk_get_optional() instead of devm_clk_get() and explicit
optional clock handling.
As clk_prepare_enable() and clk_disable_unprepare() handle optional
clocks fine, the cc_clk_on() and cc_clk_off() wrappers can be removed.
While at it, use the new "%pe" format specifier to print error codes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cc_sram_mgr_fini() doesn't do anything, so it can just be removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When no SRAM can be allocated, cc_sram_alloc() already prints an error
message. Hence there is no need to duplicate this in all callers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the way the hardware works, every double word in the SHA384 and
SHA512 larval hashes must be swapped. Currently this is done at run
time, during driver initialization.
However, this swapping can easily be done at build time. Treating each
double word as two words has the benefit of changing the larval hashes'
types from u64[] to u32[], like for all other hashes, and allows
dropping the casts and size doublings when calling cc_set_sram_desc().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unneeded casts prevent the compiler from performing valuable checks.
This is especially true for function pointers.
Remove these casts, to prevent silently introducing bugs when a
variable's type might be changed in the future.
No change in generated code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If cc_queues_status() indicates that the queue is full,
cc_send_sync_request() should loop and retry.
However, cc_queues_status() returns either 0 (for success), or -ENOSPC
(for queue full), while cc_send_sync_request() checks for real errors by
comparing with -EAGAIN. Hence -ENOSPC is always considered a real
error, and the code never retries the operation.
Fix this by just removing the check, as cc_queues_status() never returns
any other error value than -ENOSPC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reading the debugfs files under /sys/kernel/debug/ccree/ can be done by
the user at any time. On R-Car SoCs, the CCREE device is power-managed
using a moduile clock, and if this clock is not running, bogus register
values may be read.
Fix this by filling in the debugfs_regset32.dev field, so debugfs will
make sure the device is resumed while its registers are being read.
This fixes the bogus values (0x00000260) in the register dumps on R-Car
H3 ES1.0:
-e6601000.crypto/regs:HOST_IRR = 0x00000260
-e6601000.crypto/regs:HOST_POWER_DOWN_EN = 0x00000260
+e6601000.crypto/regs:HOST_IRR = 0x00000038
+e6601000.crypto/regs:HOST_POWER_DOWN_EN = 0x00000038
e6601000.crypto/regs:AXIM_MON_ERR = 0x00000000
e6601000.crypto/regs:DSCRPTR_QUEUE_CONTENT = 0x000002aa
-e6601000.crypto/regs:HOST_IMR = 0x00000260
+e6601000.crypto/regs:HOST_IMR = 0x017ffeff
e6601000.crypto/regs:AXIM_CFG = 0x001f0007
e6601000.crypto/regs:AXIM_CACHE_PARAMS = 0x00000000
-e6601000.crypto/regs:GPR_HOST = 0x00000260
+e6601000.crypto/regs:GPR_HOST = 0x017ffeff
e6601000.crypto/regs:AXIM_MON_COMP = 0x00000000
-e6601000.crypto/version:SIGNATURE = 0x00000260
-e6601000.crypto/version:VERSION = 0x00000260
+e6601000.crypto/version:SIGNATURE = 0xdcc63000
+e6601000.crypto/version:VERSION = 0xaf400001
Note that this behavior is system-dependent, and the issue does not show
up on all R-Car Gen3 SoCs and boards. Even when the device is
suspended, the module clock may be left enabled, if configured by the
firmware for Secure Mode, or when controlled by the Real-Time Core.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register qm to uacce framework for user crypto driver
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the module_param uacce_mode, which is not used currently.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
chtls_uld_add allocates room for info->nports net_device structs
following the chtls_dev struct, presumably because it was originally
intended that the ports array would be stored there. This is suggested
by the assignment which was present in initial versions and removed by
c4e848586c ("crypto: chelsio - remove redundant assignment to
cdev->ports"):
cdev->ports = (struct net_device **)(cdev + 1);
This assignment was never used, being overwritten by lldi->ports
immediately afterwards, and I couldn't find any uses of the memory
allocated past the end of the struct.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QCE hangs when presented with an AES-XTS request whose length is larger
than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the
fallback cipher handle them.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Process small blocks using the fallback cipher, as a workaround for an
observed failure (DMA-related, apparently) when computing the GCM ghash
key. This brings a speed gain as well, since it avoids the latency of
using the hardware engine to process small blocks.
Using software for all 16-byte requests would be enough to make GCM
work, but to increase performance, a larger threshold would be better.
Measuring the performance of supported ciphers with openssl speed,
software matches hardware at around 768-1024 bytes.
Considering the 256-bit ciphers, software is 2-3 times faster than qce
at 256-bytes, 30% faster at 512, and about even at 768-bytes. With
128-bit keys, the break-even point would be around 1024-bytes.
This adds the 'aes_sw_max_len' parameter, to set the largest request
length processed by the software fallback. Its default is being set to
512 bytes, a little lower than the break-even point, to balance the cost
in CPU usage.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The qce crypto driver appends an extra entry to the dst sgl, to maintain
private state information.
When the gcm driver sends requests to the ctr skcipher, it passes the
authentication tag after the actual crypto payload, but it must not be
touched.
Commit 1336c2221bee ("crypto: qce - save a sg table slot for result
buf") limited the destination sgl to avoid overwriting the
authentication tag but it assumed the tag would be in a separate sgl
entry.
This is not always the case, so it is better to limit the length of the
destination buffer to req->cryptlen before appending the result buf.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Function dev_err() after platform_get_irq() is redundant because
platform_get_irq() already prints an error.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
No logs are recorded in dmesg during chcr module load, hence
adding the print and also appending -ko to driver version.
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The libkcapi test which causes kernel panic is
aead asynchronous vmsplice multiple test.
./bin/kcapi -v -d 4 -x 10 -c "ccm(aes)"
-q 4edb58e8d5eb6bc711c43a6f3693daebde2e5524f1b55297abb29f003236e43d
-t a7877c99 -n 674742abd0f5ba -k 2861fd0253705d7875c95ba8a53171b4
-a fb7bc304a3909e66e2e0c5ef952712dd884ce3e7324171369f2c5db1adc48c7d
This patch avoids dma_mapping of a zero length sg which causes the panic,
by using sg_nents_for_len which maps only upto a specific length
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The libkcapi "cbc(aes)" failed tests are
symmetric asynchronous cipher one shot multiple test,
symmetric asynchronous cipher stream multiple test,
Symmetric asynchronous cipher vmsplice multiple test
In this patch a wait_for_completion is added in the chcr_aes_encrypt function,
which completes when the response of comes from the hardware.
This adds serialization for encryption in cbc(aes) aio case.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/ccree/cc_cipher.c: In function 'cc_setup_state_desc':
drivers/crypto/ccree/cc_cipher.c:536:15: warning:
variable 'du_size' set but not used [-Wunused-but-set-variable]
commit 5c83e8ec4d ("crypto: ccree - fix FDE descriptor sequence")
involved this unused variable, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the auth tag size from cryptlen before mapping the destination
in out-of-place AEAD decryption thus resolving a crash with
extended testmgr tests.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org # v4.19+
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add reference counter incremented for each frame enqueued in CAAM
and replace unconditional sleep in empty_caam_fq() with polling the
reference counter.
When CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y boot time on LS1043A
platform with this optimization decreases from ~1100s to ~11s.
Signed-off-by: Valentin Ciocoi Radulescu <valentin.ciocoi@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix an error causing no block sizes to be reported during
all AEAD registrations.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OFB and CTR modes block sizes were wrongfully reported as
the underlying block sizes. Fix it to 1 bytes as they
turn the block ciphers into stream ciphers.
Also document why our XTS differes from the generic
implementation.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make sure to only add the size of the auth tag to the source mapping
for encryption if it is an in-place operation. Failing to do this
previously caused us to try and map auth size len bytes from a NULL
mapping and crashing if both the cryptlen and assoclen are zero.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Deal gracefully with a NULL or empty scatterlist which can happen
if both cryptlen and assoclen are zero and we're doing in-place
AEAD encryption.
This fixes a crash when this causes us to try and map a NULL page,
at least with some platforms / DMA mapping configs.
Cc: stable@vger.kernel.org # v4.19+
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If all possible errors occurs at the same time, the error_status will be
all 1s. The doorbell timeout error and FIFO overflow error will be print
in each cycle, which should be print just once.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In error detect process, a lot of duplicate code can put into qm. We add
two callback(get_dev_hw_err_status and log_dev_hw_err) into struct
hisi_qm_err_ini to handle device error detect, meanwhile the qm error
detect not changed.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Configure zip RAS error type in error handle initialization,
Where ECC 1bit is configured as CE error, others are NFE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The initialization and uninitialization of zip/hpre/sec/qm hardware error
is processed in respective drivers, which could be unified into qm.c. We
add struct hisi_qm_err_ini into struct hisi_qm, which involve all error
handlers of device and assignment should be done in driver probe.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
Pull crypto updates from Herbert Xu:
"API:
- Removed CRYPTO_TFM_RES flags
- Extended spawn grabbing to all algorithm types
- Moved hash descsize verification into API code
Algorithms:
- Fixed recursive pcrypt dead-lock
- Added new 32 and 64-bit generic versions of poly1305
- Added cryptogams implementation of x86/poly1305
Drivers:
- Added support for i.MX8M Mini in caam
- Added support for i.MX8M Nano in caam
- Added support for i.MX8M Plus in caam
- Added support for A33 variant of SS in sun4i-ss
- Added TEE support for Raven Ridge in ccp
- Added in-kernel API to submit TEE commands in ccp
- Added AMD-TEE driver
- Added support for BCM2711 in iproc-rng200
- Added support for AES256-GCM based ciphers for chtls
- Added aead support on SEC2 in hisilicon"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits)
crypto: arm/chacha - fix build failured when kernel mode NEON is disabled
crypto: caam - add support for i.MX8M Plus
crypto: x86/poly1305 - emit does base conversion itself
crypto: hisilicon - fix spelling mistake "disgest" -> "digest"
crypto: chacha20poly1305 - add back missing test vectors and test chunking
crypto: x86/poly1305 - fix .gitignore typo
tee: fix memory allocation failure checks on drv_data and amdtee
crypto: ccree - erase unneeded inline funcs
crypto: ccree - make cc_pm_put_suspend() void
crypto: ccree - split overloaded usage of irq field
crypto: ccree - fix PM race condition
crypto: ccree - fix FDE descriptor sequence
crypto: ccree - cc_do_send_request() is void func
crypto: ccree - fix pm wrongful error reporting
crypto: ccree - turn errors to debug msgs
crypto: ccree - fix AEAD decrypt auth fail
crypto: ccree - fix typo in comment
crypto: ccree - fix typos in error msgs
crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data
crypto: x86/sha - Eliminate casts on asm implementations
...
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
Add support for the crypto engine used in i.mx8mp (i.MX 8M "Plus"),
which is very similar to the one used in i.mx8mq, i.mx8mm, i.mx8mn.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These inline versions of PM function for the case of CONFIG_PM is
not set are never used. Erase them.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cc_pm_put_suspend() return value was never checked and is not
useful. Turn it into a void functions.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We were using the irq field of the drvdata struct in
an overloaded fahsion - saving the IRQ number during init
and then storing the pending itnerrupt sources during
interrupt in the same field.
This worked because these usage are mutually exclusive but
are confusing. So simplify the code and change the init use
case to use a simple local variable.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PM code was racy, possibly causing the driver to submit
requests to a powered down device. Fix the race and while
at it simplify the PM code.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: 1358c13a48 ("crypto: ccree - fix resume race condition on init")
Cc: stable@kernel.org # v4.20
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In FDE mode (xts, essiv and bitlocker) the cryptocell hardware requires
that the the XEX key will be loaded after Key1.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cc_do_send_request() cannot fail and always returns
-EINPROGRESS. Turn it into a void function and simplify
code.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync() can return 1 as a valid (none error) return
code. Treat it as such.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We have several loud error log messages that are already reported
via the normal return code mechanism and produce a lot of noise
when the new testmgr extra test are enabled. Turn these into
debug only messages
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
