Pull userns vfs updates from Eric Biederman:
"This tree contains some very long awaited work on generalizing the
user namespace support for mounting filesystems to include filesystems
with a backing store. The real world target is fuse but the goal is
to update the vfs to allow any filesystem to be supported. This
patchset is based on a lot of code review and testing to approach that
goal.
While looking at what is needed to support the fuse filesystem it
became clear that there were things like xattrs for security modules
that needed special treatment. That the resolution of those concerns
would not be fuse specific. That sorting out these general issues
made most sense at the generic level, where the right people could be
drawn into the conversation, and the issues could be solved for
everyone.
At a high level what this patchset does a couple of simple things:
- Add a user namespace owner (s_user_ns) to struct super_block.
- Teach the vfs to handle filesystem uids and gids not mapping into
to kuids and kgids and being reported as INVALID_UID and
INVALID_GID in vfs data structures.
By assigning a user namespace owner filesystems that are mounted with
only user namespace privilege can be detected. This allows security
modules and the like to know which mounts may not be trusted. This
also allows the set of uids and gids that are communicated to the
filesystem to be capped at the set of kuids and kgids that are in the
owning user namespace of the filesystem.
One of the crazier corner casees this handles is the case of inodes
whose i_uid or i_gid are not mapped into the vfs. Most of the code
simply doesn't care but it is easy to confuse the inode writeback path
so no operation that could cause an inode write-back is permitted for
such inodes (aka only reads are allowed).
This set of changes starts out by cleaning up the code paths involved
in user namespace permirted mounts. Then when things are clean enough
adds code that cleanly sets s_user_ns. Then additional restrictions
are added that are possible now that the filesystem superblock
contains owner information.
These changes should not affect anyone in practice, but there are some
parts of these restrictions that are changes in behavior.
- Andy's restriction on suid executables that does not honor the
suid bit when the path is from another mount namespace (think
/proc/[pid]/fd/) or when the filesystem was mounted by a less
privileged user.
- The replacement of the user namespace implicit setting of MNT_NODEV
with implicitly setting SB_I_NODEV on the filesystem superblock
instead.
Using SB_I_NODEV is a stronger form that happens to make this state
user invisible. The user visibility can be managed but it caused
problems when it was introduced from applications reasonably
expecting mount flags to be what they were set to.
There is a little bit of work remaining before it is safe to support
mounting filesystems with backing store in user namespaces, beyond
what is in this set of changes.
- Verifying the mounter has permission to read/write the block device
during mount.
- Teaching the integrity modules IMA and EVM to handle filesystems
mounted with only user namespace root and to reduce trust in their
security xattrs accordingly.
- Capturing the mounters credentials and using that for permission
checks in d_automount and the like. (Given that overlayfs already
does this, and we need the work in d_automount it make sense to
generalize this case).
Furthermore there are a few changes that are on the wishlist:
- Get all filesystems supporting posix acls using the generic posix
acls so that posix_acl_fix_xattr_from_user and
posix_acl_fix_xattr_to_user may be removed. [Maintainability]
- Reducing the permission checks in places such as remount to allow
the superblock owner to perform them.
- Allowing the superblock owner to chown files with unmapped uids and
gids to something that is mapped so the files may be treated
normally.
I am not considering even obvious relaxations of permission checks
until it is clear there are no more corner cases that need to be
locked down and handled generically.
Many thanks to Seth Forshee who kept this code alive, and putting up
with me rewriting substantial portions of what he did to handle more
corner cases, and for his diligent testing and reviewing of my
changes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (30 commits)
fs: Call d_automount with the filesystems creds
fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns
evm: Translate user/group ids relative to s_user_ns when computing HMAC
dquot: For now explicitly don't support filesystems outside of init_user_ns
quota: Handle quota data stored in s_user_ns in quota_setxquota
quota: Ensure qids map to the filesystem
vfs: Don't create inodes with a uid or gid unknown to the vfs
vfs: Don't modify inodes with a uid or gid unknown to the vfs
cred: Reject inodes with invalid ids in set_create_file_as()
fs: Check for invalid i_uid in may_follow_link()
vfs: Verify acls are valid within superblock's s_user_ns.
userns: Handle -1 in k[ug]id_has_mapping when !CONFIG_USER_NS
fs: Refuse uid/gid changes which don't map into s_user_ns
selinux: Add support for unprivileged mounts from user namespaces
Smack: Handle labels consistently in untrusted mounts
Smack: Add support for unprivileged mounts from user namespaces
fs: Treat foreign mounts as nosuid
fs: Limit file caps to the user namespace of the super block
userns: Remove the now unnecessary FS_USERNS_DEV_MOUNT flag
userns: Remove implicit MNT_NODEV fragility.
...
Pull vfs updates from Al Viro:
"Assorted cleanups and fixes.
Probably the most interesting part long-term is ->d_init() - that will
have a bunch of followups in (at least) ceph and lustre, but we'll
need to sort the barrier-related rules before it can get used for
really non-trivial stuff.
Another fun thing is the merge of ->d_iput() callers (dentry_iput()
and dentry_unlink_inode()) and a bunch of ->d_compare() ones (all
except the one in __d_lookup_lru())"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
fs/dcache.c: avoid soft-lockup in dput()
vfs: new d_init method
vfs: Update lookup_dcache() comment
bdev: get rid of ->bd_inodes
Remove last traces of ->sync_page
new helper: d_same_name()
dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends()
vfs: clean up documentation
vfs: document ->d_real()
vfs: merge .d_select_inode() into .d_real()
unify dentry_iput() and dentry_unlink_inode()
binfmt_misc: ->s_root is not going anywhere
drop redundant ->owner initializations
ufs: get rid of redundant checks
orangefs: constify inode_operations
missed comment updates from ->direct_IO() prototype change
file_inode(f)->i_mapping is f->f_mapping
trim fsnotify hooks a bit
9p: new helper - v9fs_parent_fid()
debugfs: ->d_parent is never NULL or negative
...
Changes in this update:
o generic iomap based IO path infrastructure
o generic iomap based fiemap implementation
o xfs iomap based Io path implementation
o buffer error handling fixes
o tracking of in flight buffer IO for unmount serialisation
o direct IO and DAX io path separation and simplification
o shortform directory format definition changes for wider platform compatibility
o various buffer cache fixes
o cleanups in preparation for rmap merge
o error injection cleanups and fixes
o log item format buffer memory allocation restructuring to prevent rare OOM
reclaim deadlocks
o sparse inode chunks are now fully supported.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vcSd
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"The major addition is the new iomap based block mapping
infrastructure. We've been kicking this about locally for years, but
there are other filesystems want to use it too (e.g. gfs2). Now it
is fully working, reviewed and ready for merge and be used by other
filesystems.
There are a lot of other fixes and cleanups in the tree, but those are
XFS internal things and none are of the scale or visibility of the
iomap changes. See below for details.
I am likely to send another pull request next week - we're just about
ready to merge some new functionality (on disk block->owner reverse
mapping infrastructure), but that's a huge chunk of code (74 files
changed, 7283 insertions(+), 1114 deletions(-)) so I'm keeping that
separate to all the "normal" pull request changes so they don't get
lost in the noise.
Summary of changes in this update:
- generic iomap based IO path infrastructure
- generic iomap based fiemap implementation
- xfs iomap based Io path implementation
- buffer error handling fixes
- tracking of in flight buffer IO for unmount serialisation
- direct IO and DAX io path separation and simplification
- shortform directory format definition changes for wider platform
compatibility
- various buffer cache fixes
- cleanups in preparation for rmap merge
- error injection cleanups and fixes
- log item format buffer memory allocation restructuring to prevent
rare OOM reclaim deadlocks
- sparse inode chunks are now fully supported"
* tag 'xfs-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (53 commits)
xfs: remove EXPERIMENTAL tag from sparse inode feature
xfs: bufferhead chains are invalid after end_page_writeback
xfs: allocate log vector buffers outside CIL context lock
libxfs: directory node splitting does not have an extra block
xfs: remove dax code from object file when disabled
xfs: skip dirty pages in ->releasepage()
xfs: remove __arch_pack
xfs: kill xfs_dir2_inou_t
xfs: kill xfs_dir2_sf_off_t
xfs: split direct I/O and DAX path
xfs: direct calls in the direct I/O path
xfs: stop using generic_file_read_iter for direct I/O
xfs: split xfs_file_read_iter into buffered and direct I/O helpers
xfs: remove s_maxbytes enforcement in xfs_file_read_iter
xfs: kill ioflags
xfs: don't pass ioflags around in the ioctl path
xfs: track and serialize in-flight async buffers against unmount
xfs: exclude never-released buffers from buftarg I/O accounting
xfs: don't reset b_retries to 0 on every failure
xfs: remove extraneous buffer flag changes
...
Use set_posix_acl, which includes proper permission checks, instead of
calling ->set_acl directly. Without this anyone may be able to grant
themselves permissions to a file by setting the ACL.
Lock the inode to make the new checks atomic with respect to set_acl.
(Also, nfsd was the only caller of set_acl not locking the inode, so I
suspect this may fix other races.)
This also simplifies the code, and ensures our ACLs are checked by
posix_acl_valid.
The permission checks and the inode locking were lost with commit
4ac7249e, which changed nfsd to use the set_acl inode operation directly
instead of going through xattr handlers.
Reported-by: David Sinquin <david@sinquin.eu>
[agreunba@redhat.com: use set_posix_acl]
Fixes: 4ac7249e
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Today what is normally called data (the mount options) is not passed
to fill_super through mount_ns.
Pass the mount options and the namespace separately to mount_ns so
that filesystems such as proc that have mount options, can use
mount_ns.
Pass the user namespace to mount_ns so that the standard permission
check that verifies the mounter has permissions over the namespace can
be performed in mount_ns instead of in each filesystems .mount method.
Thus removing the duplication between mqueuefs and proc in terms of
permission checks. The extra permission check does not currently
affect the rpc_pipefs filesystem and the nfsd filesystem as those
filesystems do not currently allow unprivileged mounts. Without
unpvileged mounts it is guaranteed that the caller has already passed
capable(CAP_SYS_ADMIN) which guarantees extra permission check will
pass.
Update rpc_pipefs and the nfsd filesystem to ensure that the network
namespace reference is always taken in fill_super and always put in kill_sb
so that the logic is simpler and so that errors originating inside of
fill_super do not cause a network namespace leak.
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Move the state selection logic inside from the caller,
always making it return correct stp to use.
Signed-off-by: J . Bruce Fields <bfields@fieldses.org>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
To avoid racing entry into nfs4_get_vfs_file().
Make init_open_stateid() return with locked stateid to be unlocked
by the caller.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It used to be the case that state had an rwlock that was locked for write
by downgrades, but for read for upgrades (opens). Well, the problem is
if there are two competing opens for the same state, they step on
each other toes potentially leading to leaking file descriptors
from the state structure, since access mode is a bitmap only set once.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Also simplify the logic a bit.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>
On 32-bit:
fs/nfsd/blocklayout.c: In function ‘nfsd4_block_get_device_info_scsi’:
fs/nfsd/blocklayout.c:337: warning: integer constant is too large for ‘long’ type
fs/nfsd/blocklayout.c:344: warning: integer constant is too large for ‘long’ type
fs/nfsd/blocklayout.c: In function ‘nfsd4_scsi_fence_client’:
fs/nfsd/blocklayout.c:385: warning: integer constant is too large for ‘long’ type
Add the missing "ULL" postfix to 64-bit constant NFSD_MDS_PR_KEY to fix
this.
Fixes: f99d4fbdae ("nfsd: add SCSI layout support")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
it's not needed for file_operations of inodes located on fs defined
in the hosting module and for file_operations that go into procfs.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=k6RP
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"A very quiet cycle for nfsd, mainly just an RDMA update from Chuck
Lever"
* tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux:
sunrpc: fix stripping of padded MIC tokens
svcrpc: autoload rdma module
svcrdma: Generalize svc_rdma_xdr_decode_req()
svcrdma: Eliminate code duplication in svc_rdma_recvfrom()
svcrdma: Drain QP before freeing svcrdma_xprt
svcrdma: Post Receives only for forward channel requests
svcrdma: Remove superfluous line from rdma_read_chunks()
svcrdma: svc_rdma_put_context() is invoked twice in Send error path
svcrdma: Do not add XDR padding to xdr_buf page vector
svcrdma: Support IPv6 with NFS/RDMA
nfsd: handle seqid wraparound in nfsd4_preprocess_layout_stateid
Remove unnecessary allocation
Pull vfs cleanups from Al Viro:
"More cleanups from Christoph"
* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: use RWF_SYNC
fs: add RWF_DSYNC aand RWF_SYNC
ceph: use generic_write_sync
fs: simplify the generic_write_sync prototype
fs: add IOCB_SYNC and IOCB_DSYNC
direct-io: remove the offset argument to dio_complete
direct-io: eliminate the offset argument to ->direct_IO
xfs: eliminate the pos variable in xfs_file_dio_aio_write
filemap: remove the pos argument to generic_file_direct_write
filemap: remove pos variables in generic_file_read_iter
An xdr_buf has a head, a vector of pages, and a tail. Each
RPC request is presented to the NFS server contained in an
xdr_buf.
The RDMA transport would like to supply the NFS server with only
the NFS WRITE payload bytes in the page vector. In some common
cases, that would allow the NFS server to swap those pages right
into the target file's page cache.
Have the transport's RDMA Read logic put XDR pad bytes in the tail
iovec, and not in the pages that hold the data payload.
The NFSv3 WRITE XDR decoder is finicky about the lengths involved,
so make sure it is looking in the correct places when computing
the total length of the incoming NFS WRITE request.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the existing static function to an inline helper, and call it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
Note this pull request also includes the client side of SCSI layout,
with Trond's permission.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MToz
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux
Pull more nfsd updates from Bruce Fields:
"Apologies for the previous request, which omitted the top 8 commits
from my for-next branch (including the SCSI layout commits). Thanks
to Trond for spotting my error!"
This actually includes the new layout types, so here's that part of
the pull message repeated:
"Support for a new pnfs layout type from Christoph Hellwig. The new
layout type is a variant of the block layout which uses SCSI features
to offer improved fencing and device identification.
Note this pull request also includes the client side of SCSI layout,
with Trond's permission"
* tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux:
nfsd: use short read as well as i_size to set eof
nfsd: better layoutupdate bounds-checking
nfsd: block and scsi layout drivers need to depend on CONFIG_BLOCK
nfsd: add SCSI layout support
nfsd: move some blocklayout code
nfsd: add a new config option for the block layout driver
nfs/blocklayout: add SCSI layout support
nfs4.h: add SCSI layout definitions
pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
(Also: note this pull request also includes the client side of SCSI
layout, with Trond's permission.)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mY8w
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Various bugfixes, a RDMA update from Chuck Lever, and support for a
new pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
(Also: note this pull request also includes the client side of SCSI
layout, with Trond's permission.)"
* tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux:
sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
nfsd: recover: fix memory leak
nfsd: fix deadlock secinfo+readdir compound
nfsd4: resfh unused in nfsd4_secinfo
svcrdma: Use new CQ API for RPC-over-RDMA server send CQs
svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs
svcrdma: Remove close_out exit path
svcrdma: Hook up the logic to return ERR_CHUNK
svcrdma: Use correct XID in error replies
svcrdma: Make RDMA_ERROR messages work
rpcrdma: Add RPCRDMA_HDRLEN_ERR
svcrdma: svc_rdma_post_recv() should close connection on error
svcrdma: Close connection when a send error occurs
nfsd: Lower NFSv4.1 callback message size limit
svcrdma: Do not send Write chunk XDR pad with inline content
svcrdma: Do not write xdr_buf::tail in a Write chunk
svcrdma: Find client-provided write and reply chunks once per reply
nfsd: Update NFS server comments related to RDMA support
nfsd: Fix a memory leak when meeting unsupported state_protect_how4
nfsd4: fix bad bounds checking
Use the result of a local read to determine when to set the eof flag. This
allows us to return the location of the end of the file atomically at the
time of the read.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
[bfields: add some documentation]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
You could add any multiple of 2^32/PNFS_SCSI_RANGE_SIZE to nr_iomaps and
still pass this check. You'd probably still fail the following kcalloc,
but best to be paranoid since this is from-the-wire data.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull vfs updates from Al Viro:
- Preparations of parallel lookups (the remaining main obstacle is the
need to move security_d_instantiate(); once that becomes safe, the
rest will be a matter of rather short series local to fs/*.c
- preadv2/pwritev2 series from Christoph
- assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
dcache.c: new helper: __d_add()
don't bother with __d_instantiate(dentry, NULL)
untangle fsnotify_d_instantiate() a bit
uninline d_add()
replace d_add_unique() with saner primitive
quota: use lookup_one_len_unlocked()
cifs_get_root(): use lookup_one_len_unlocked()
nfs_lookup: don't bother with d_instantiate(dentry, NULL)
kill dentry_unhash()
ceph_fill_trace(): don't bother with d_instantiate(dn, NULL)
autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup()
configfs: move d_rehash() into configfs_create() for regular files
ceph: don't bother with d_rehash() in splice_dentry()
namei: teach lookup_slow() to skip revalidate
namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()
lookup_one_len_unlocked(): use lookup_dcache()
namei: simplify invalidation logics in lookup_dcache()
namei: change calling conventions for lookup_{fast,slow} and follow_managed()
...
This is a simple extension to the block layout driver to use SCSI
persistent reservations for access control and fencing, as well as
SCSI VPD pages for device identification.
For this we need to pass the nfs4_client to the proc_getdeviceinfo method
to generate the reservation key, and add a new fence_client method
to allow for fence actions in the layout driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Trivial reorganization, no change in behavior. Move some code around,
pull some code out of block layoutcommit that will be useful for the
scsi layout.
[bfields@redhat.com: split off from "nfsd: add SCSI layout support"]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Split the config symbols into a generic pNFS one, which is invisible
and gets selected by the layout drivers, and one for the block layout
driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_cltrack_grace_start() will allocate the memory for grace_start but
when we returned due to error we missed freeing it.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd_lookup_dentry exits with the parent filehandle locked. fh_put also
unlocks if necessary (nfsd filehandle locking is probably too lenient),
so it gets unlocked eventually, but if the following op in the compound
needs to lock it again, we can deadlock.
A fuzzer ran into this; normal clients don't send a secinfo followed by
a readdir in the same compound.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This way we can set kiocb flags also from the sync read/write path for
the read_iter/write_iter operations. For now there is no way to pass
flags to plain read/write operations as there is no real need for that,
and all flags passed are explicitly rejected for these files.
Signed-off-by: Milosz Tanski <milosz@adfin.com>
[hch: rebased on top of my kiocb changes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The maximum size of a backchannel message on RPC-over-RDMA depends
on the connection's inline threshold. Today that threshold is
typically 1024 bytes, making the maximum message size 996 bytes.
The Linux server's CREATE_SESSION operation checks that the size
of callback Calls can be as large as 1044 bytes, to accommodate
RPCSEC_GSS. Thus CREATE_SESSION fails if a client advertises the
true message size maximum of 996 bytes.
But the server's backchannel currently does not support RPCSEC_GSS.
The actual maximum size it needs is much smaller. It is safe to
reduce the limit to enable NFSv4.1 on RDMA backchannel operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The server does indeed now support NFSv4.1 on RDMA transports. It
does not support shifting an RDMA-capable TCP transport (such as
iWARP) to RDMA mode.
Reported-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remember free allocated client when meeting unsupported state protect how.
Fixes: 50c7b948ad ("nfsd: minor consolidation of mach_cred handling code")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A number of spots in the xdr decoding follow a pattern like
n = be32_to_cpup(p++);
READ_BUF(n + 4);
where n is a u32. The only bounds checking is done in READ_BUF itself,
but since it's checking (n + 4), it won't catch cases where n is very
large, (u32)(-4) or higher. I'm not sure exactly what the consequences
are, but we've seen crashes soon after.
Instead, just break these up into two READ_BUF()s.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kerberized NFSv4.1 mounts, and Scott Mayhew's work addressing ACK storms
that can affect some high-availability NFS setups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=G7V3
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.5' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Smaller bugfixes and cleanup, including a fix for a failures of
kerberized NFSv4.1 mounts, and Scott Mayhew's work addressing ACK
storms that can affect some high-availability NFS setups"
* tag 'nfsd-4.5' of git://linux-nfs.org/~bfields/linux:
nfsd: add new io class tracepoint
nfsd: give up on CB_LAYOUTRECALLs after two lease periods
nfsd: Fix nfsd leaks sunrpc module references
lockd: constify nlmsvc_binding structure
lockd: use to_delayed_work
nfsd: use to_delayed_work
Revert "svcrdma: Do not send XDR roundup bytes for a write chunk"
lockd: Register callbacks on the inetaddr_chain and inet6addr_chain
nfsd: Register callbacks on the inetaddr_chain and inet6addr_chain
sunrpc: Add a function to close temporary transports immediately
nfsd: don't base cl_cb_status on stale information
nfsd4: fix gss-proxy 4.1 mounts for some AD principals
nfsd: fix unlikely NULL deref in mach_creds_match
nfsd: minor consolidation of mach_cred handling code
nfsd: helper for dup of possibly NULL string
svcrpc: move some initialization to common code
nfsd: fix a warning message
nfsd: constify nfsd4_callback_ops structure
nfsd: recover: constify nfsd4_client_tracking_ops structures
svcrdma: Do not send XDR roundup bytes for a write chunk
Add some new tracepoints in the nfsd read/write codepaths. The idea
is that this will give us the ability to measure how long each phase of
a read or write operation takes.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull misc vfs updates from Al Viro:
"All kinds of stuff. That probably should've been 5 or 6 separate
branches, but by the time I'd realized how large and mixed that bag
had become it had been too close to -final to play with rebasing.
Some fs/namei.c cleanups there, memdup_user_nul() introduction and
switching open-coded instances, burying long-dead code, whack-a-mole
of various kinds, several new helpers for ->llseek(), assorted
cleanups and fixes from various people, etc.
One piece probably deserves special mention - Neil's
lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets
called without ->i_mutex and tries to avoid ever taking it. That, of
course, means that it's not useful for any directory modifications,
but things like getting inode attributes in nfds readdirplus are fine
with that. I really should've asked for moratorium on lookup-related
changes this cycle, but since I hadn't done that early enough... I
*am* asking for that for the coming cycle, though - I'm going to try
and get conversion of i_mutex to rwsem with ->lookup() done under lock
taken shared.
There will be a patch closer to the end of the window, along the lines
of the one Linus had posted last May - mechanical conversion of
->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
inode_is_locked()/inode_lock_nested(). To quote Linus back then:
-----
| This is an automated patch using
|
| sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
| sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
| sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
| sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
| sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
|
| with a very few manual fixups
-----
I'm going to send that once the ->i_mutex-affecting stuff in -next
gets mostly merged (or when Linus says he's about to stop taking
merges)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
nfsd: don't hold i_mutex over userspace upcalls
fs:affs:Replace time_t with time64_t
fs/9p: use fscache mutex rather than spinlock
proc: add a reschedule point in proc_readfd_common()
logfs: constify logfs_block_ops structures
fcntl: allow to set O_DIRECT flag on pipe
fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
fs: xattr: Use kvfree()
[s390] page_to_phys() always returns a multiple of PAGE_SIZE
nbd: use ->compat_ioctl()
fs: use block_device name vsprintf helper
lib/vsprintf: add %*pg format specifier
fs: use gendisk->disk_name where possible
poll: plug an unused argument to do_poll
amdkfd: don't open-code memdup_user()
cdrom: don't open-code memdup_user()
rsxx: don't open-code memdup_user()
mtip32xx: don't open-code memdup_user()
[um] mconsole: don't open-code memdup_user_nul()
[um] hostaudio: don't open-code memdup_user()
...
Pull vfs copy_file_range updates from Al Viro:
"Several series around copy_file_range/CLONE"
* 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: use new dedupe data function pointer
vfs: hoist the btrfs deduplication ioctl to the vfs
vfs: wire up compat ioctl for CLONE/CLONE_RANGE
cifs: avoid unused variable and label
nfsd: implement the NFSv4.2 CLONE operation
nfsd: Pass filehandle to nfs4_preprocess_stateid_op()
vfs: pull btrfs clone API to vfs layer
locks: new locks_mandatory_area calling convention
vfs: Add vfs_copy_file_range() support for pagecache copies
btrfs: add .copy_file_range file operation
x86: add sys_copy_file_range to syscall tables
vfs: add copy_file_range syscall and vfs helper
We need information about exports when crossing mountpoints during
lookup or NFSv4 readdir. If we don't already have that information
cached, we may have to ask (and wait for) rpc.mountd.
In both cases we currently hold the i_mutex on the parent of the
directory we're asking rpc.mountd about. We've seen situations where
rpc.mountd performs some operation on that directory that tries to take
the i_mutex again, resulting in deadlock.
With some care, we may be able to avoid that in rpc.mountd. But it
seems better just to avoid holding a mutex while waiting on userspace.
It appears that lookup_one_len is pretty much the only operation that
needs the i_mutex. So we could just drop the i_mutex elsewhere and do
something like
mutex_lock()
lookup_one_len()
mutex_unlock()
In many cases though the lookup would have been cached and not required
the i_mutex, so it's more efficient to create a lookup_one_len() variant
that only takes the i_mutex when necessary.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Have the CB_LAYOUTRECALL code treat NFS4_OK and NFS4ERR_DELAY returns
equivalently. Change the code to periodically resend CB_LAYOUTRECALLS
until the ls_layouts list is empty or the client returns a different
error code.
If we go for two lease periods without the list being emptied or the
client sending a hard error, then we give up and clean out the list
anyway.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nlmsvc_binding structure is never modified, so declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Register callbacks on inetaddr_chain and inet6addr_chain to trigger
cleanup of nfsd transport sockets when an ip address is deleted.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The rpc client we use to send callbacks may change occasionally. (In
the 4.0 case, the client can use setclientid/setclientid_confirm to
update the callback parameters. In the 4.1+ case, sessions and
connections can come and go.)
The update is done from the callback thread by nfsd4_process_cb_update,
which shuts down the old rpc client and then creates a new one.
The client shutdown kills any ongoing rpc calls. There won't be any new
ones till the new one's created and the callback thread moves on.
When an rpc encounters a problem that may suggest callback rpc's
aren't working any longer, it normally sets NFSD4_CB_DOWN, so the server
can tell the client something's wrong.
But if the rpc notices CB_UPDATE is set, then the failure may just be a
normal result of shutting down the callback client. Or it could just be
a coincidence, but in any case, it means we're runing with the old
about-to-be-discarded client, so the failure's not interesting.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We do need to serialize layout stateid morphing operations, but we
currently hold the ls_mutex across a layout recall which is pretty
ugly. It's also unnecessary -- once we've bumped the seqid and
copied it, we don't need to serialize the rest of the CB_LAYOUTRECALL
vs. anything else. Just drop the mutex once the copy is done.
This was causing a "workqueue leaked lock or atomic" warning and an
occasional deadlock.
There's more work to be done here but this fixes the immediate
regression.
Fixes: cc8a55320b "nfsd: serialize layout stateid morphing operations"
Cc: stable@vger.kernel.org
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
