Commit Graph

45 Commits

Author SHA1 Message Date
Linus Walleij
e0e1e39de4 pinctrl: Add skew-delay pin config and bindings
Some pin controllers (such as the Gemini) can control the
expected clock skew and output delay on certain pins with a
sub-nanosecond granularity. This is typically done by shunting
in a number of double inverters in front of or behind the pin.
Make it possible to configure this with a generic binding.

Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08 13:49:45 +01:00
Baolin Wang
6606bc9dee pinctrl: Add sleep related state to indicate sleep related configs
In some scenarios, we should set some pins as input/output/pullup/pulldown
when the specified system goes into deep sleep mode, then when the system
goes into deep sleep mode, these pins will be set automatically by hardware.

That means some pins are not controlled by any specific driver in the OS, but
need to be controlled when entering sleep mode. Thus we introduce one sleep
state config into pinconf-generic for users to configure.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 09:15:21 +02:00
Rob Herring
f5292d06c4 pinctrl: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Barry Song <baohua@kernel.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: kernel@stlinux.com
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14 15:01:02 +02:00
Jacopo Mondi
425562429d pinctrl: generic: Add output-enable property
Add output-enable generic pin configuration property.
This properties allows enabling/disabling pin's output capabilities
without actually driving any value on the line.

Acked-by: Rob Herring <robh@kernel.org>
[Added inline elaborations on buffer enabling/disabling]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29 14:30:49 +02:00
Linus Walleij
b4d2ea2af9 Revert "pinctrl: generic: Add bi-directional and output-enable"
This reverts commit 8c58f1a7a4.

It turns out that applying these generic properties was
premature: the properties used in the driver using this
are of unclear electrical nature and the subject need to
be discussed.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22 10:39:10 +02:00
Jacopo Mondi
8c58f1a7a4 pinctrl: generic: Add bi-directional and output-enable
Add bi-directional and output-enable pin configuration properties.

bi-directional allows to specify when a pin shall operate in input and
output mode at the same time. This is particularly useful in platforms
where input and output buffers have to be manually enabled.

output-enable is just syntactic sugar to specify that a pin shall
operate in output mode, ignoring the provided argument.
This pairs with input-enable pin configuration option.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-11 11:01:33 +02:00
Andy Shevchenko
3ec440e33f pinctrl: Fix spelling typos
Just fix spelling typos in comments.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-14 14:42:22 +01:00
Laxman Dewangan
e06c2ee5f1 pinctrl: generic: Parse pinmux init nodes if node status is okay
During pinmux registration, pinmux table is parsed from DT
for making the pinmux table configuration of pins.

Parse the only those node whose status is not disabled.
This will help on reusing the pin configuration table across
platform and disabling the node by status property if that node
is not needed on given platform.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-29 10:31:58 +02:00
Linus Walleij
dd032e8dc5 Merge branch 'devel-dt-free-map' into devel 2016-06-23 11:19:14 +02:00
Jon Hunter
8dfebf57bd pinctrl: pinconf: Add generic helper function for freeing mappings
The pinconf-generic.h file exposes functions for creating generic mappings
but it does not expose a function for freeing the mappings. Add a function
for freeing generic mappings.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23 11:18:56 +02:00
Masahiro Yamada
a672eb5e27 pinctrl: pinconf: separate config parameters with commas for debugfs
To improve debugfs readability, use commas instead of whitespaces
for separating configuration parameters.

For example, the "pinconf-pins" dump on my board will change as follows:

Without this commit:

 # head -5 pinconf-pins
 Pin config settings per pin
 Format: pin (name): configs
 pin 0 (ED0): input bias pull down output drive strength (8 mA) input enabled
 pin 1 (ED1): input bias pull down output drive strength (8 mA) input enabled
 pin 2 (ED2): input bias pull down output drive strength (8 mA) input enabled

With this commit:

 # head -5 pinconf-pins
 Pin config settings per pin
 Format: pin (name): configs
 pin 0 (ED0): input bias pull down, output drive strength (8 mA), input enabled
 pin 1 (ED1): input bias pull down, output drive strength (8 mA), input enabled
 pin 2 (ED2): input bias pull down, output drive strength (8 mA), input enabled

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31 10:29:06 +02:00
Irina Tirdea
d32f7fd3bb pinctrl: Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map
Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map, since
it does not depend on device tree despite the current name. This
will enforce a consistent naming in pinctr-utils.c and will make
it clear it can be called from outside device tree (e.g. from
ACPI handling code).

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-01 15:06:36 +02:00
Yingjoe Chen
d9ac5e25f1 pinctrl: update document for pinconf_generic_parse_dt_config
The returned configs from pinconf_generic_parse_dt_config() is
duplicated from original. Make it clear it must be freed when no
longer necessary.

Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01 11:11:05 +01:00
Masahiro Yamada
69c308e2bc pinctrl: pinconf-generic: add "input-schmitt" DT property
PIN_CONFIG_INPUT_SCHMITT is defined in enum_pin_config_param,
but the corresponding DT property is missing.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 15:09:11 -07:00
Masahiro Yamada
3c4b23dd71 pinctrl: pinconf-generic: sort pin configuration params alphabetically
Currently, the dt_params array in drivers/pinctrl/pinconf-generic.c
is not sorted in the same order as the enum pin_config_param in
include/linux/pinctrl/pinconf-generic.h.

Sort enum pin_config_param, conf_items, dt_params, alphabetically
for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 15:07:27 -07:00
Baruch Siach
4024efb404 pinctrl: pinconf-generic: add dt node names to error messages
This makes the error message much more useful.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27 09:53:10 +01:00
Baruch Siach
c7289500e2 pinctrl: pinconf-generic: scan also referenced phandle node
Make pinconf_generic_dt_node_to_map() also scan the dt pin configuration node
directly referenced by phandle, not only its child nodes.

The "parent scan" feature needs a few other changes:

   * Move the pinconf_generic_dt_node_to_map() error handling code to a common
     place, under the 'exit' label.

   * Move the pins/groups strings count earlier in
     pinconf_generic_dt_subnode_to_map(), to allow us to bail out early when
     these properties are missing or wrong

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27 09:51:22 +01:00
Linus Walleij
f684e4ac9f pinctrl: pinconf-generic: loose DT dependence
New pin controllers such as ACPI-based may also have custom properties
to parse, and should be able to use generic pin config. Let's make the
code compile on !OF systems and rename members a bit to underscore it
is custom parameters and not necessarily DT parameters.

This fixes a build regression for x86_64 on the zeroday kernel builds.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-and-tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14 14:21:38 +01:00
Soren Brinkmann
dd4d01f7ba pinctrl: pinconf-generic: Allow driver to specify DT params
Additionally to the generic DT parameters, allow drivers to provide
driver-specific DT parameters to be used with the generic parser
infrastructure.

To achieve this 'struct pinctrl_desc' is extended to pass custom pinconf
option to the core. In order to pass this kind of information, the
related data structures - 'struct pinconf_generic_dt_params',
'pin_config_item' - are moved from pinconf internals to the
pinconf-generic header.

Additionally pinconfg-generic is refactored to not only iterate over the
generic pinconf parameters but also take the parameters into account
that are provided through the driver's 'struct pinctrl_desc'.
In particular 'pinconf_generic_parse_dt_config()' and
'pinconf_generic_dump' helpers are split into two parts each. In order
to have a more generic helper that can be used to process the generic
parameters as well as the driver-specific ones.

v2:
 - fix typo
 - add missing documentation for @conf_items member in struct
 - rebase to pinctrl/devel: conflict in abx500
 - rename _pinconf_generic_dump() to pinconf_generic_dump_one()
 - removed '_' from _parse_dt_cfg()
 - removed BUG_ONs, error condition is handled in if statements
 - removed pinconf_generic_dump_group() & pinconf_generic_dump_pin
   helpers
   - fixed up corresponding call sites
   - renamed pinconf_generic_dump() to pinconf_generic_dump_pins()
   - added kernel-doc to pinconf_generic_dump_pins()
 - add kernel-doc
 - more verbose commit message

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-11 22:32:19 +01:00
Soren Brinkmann
31c89c9596 pinctrl: pinconf-generic: Infer map type from DT property
With the new 'groups' property, the DT parser can infer the map type
from the fact whether 'pins' or 'groups' is used to specify the pin
group to work on.

To maintain backwards compatibitliy with current usage of the DT
binding, this is only done when PIN_MAP_TYPE_INVALID is passed to the
parsing function as type.

Also, a new helper 'pinconf_generic_dt_node_to_map_all()' is introduced,
which can be used by drivers as generic callback for dt_node_to_map() to
leverage the new feature.

Changes since v2:
 - rename dt_pin_specifier to subnode_target_type
 - add additional comment in header file explaining passing an invalid
   map type
 - mention map_all() helper in commit message
Changes since RFC v2:
 - none

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-11 22:30:04 +01:00
Soren Brinkmann
2500bcc9da pinctrl: pinconf-generic: Declare dt_params/conf_items const
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-11 13:00:25 +01:00
Soren Brinkmann
eec450713e pinctrl: pinconf-generic: Add flag to print arguments
When dumping pinconf information in debugfs, config arguments are only
printed when a unit is present and the argument is != 0. For parameters
like the slew rate, this does not work. The slew rate uses a driver
specific format for the argument, i.e. 0 can be a valid argument and a
unit is not provided for it.
For that reason, add a flag to enable printing the argument instead of
inferring it from the presence of a unit and the value of the argument.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-28 16:59:31 +01:00
Ivan T. Ivanov
ca6c55189a pinctrl: Enable "power-source" to be extracted from DT files
Add "power-source" property to generic options used for DT parsing files.
This  enables drivers, which use generic pin configurations, to get the
value passed to this property.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-28 10:16:35 +02:00
Benoit Taine
db388dfb90 pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy
This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci

Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27 16:06:08 +02:00
Sherman Yin
8ba3f4d000 pinctrl: Adds slew-rate, input-enable/disable
This commit adds slew-rate and input-enable/disable support for pinconf
-generic.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-16 10:55:03 +01:00
Axel Lin
acf564a8f3 pinctrl: pinconf-generic: Remove ti prefix in dev_err messages
It does not make sense to show ti prefix in pinconf_generic_dt_subnode_to_map()
dev_err messages.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-29 09:48:13 +02:00
Laxman Dewangan
3287c24088 pinctrl: utils : add support to pass config type in generic util APIs
Add support to pass the config type like GROUP or PIN when using
the utils or generic pin configuration APIs. This will make the
APIs more generic.

Added additional inline APIs such that it can be use directly as
callback for the pinctrl_ops.

Changes from V1:
- Remove separate implementation for pins and group for
  pinctrl_utils_dt_free_map and improve this function
  to support both i.e. PINS and GROUPs.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23 08:56:32 +02:00
Laxman Dewangan
e81c8f18af pinctrl: pinconf-generic: add generic APIs for mapping pinctrl node
Add generic APIs to map the DT node and its sub node in pinconf generic
driver. These APIs can be used from driver to parse the DT node who
uses the pinconf generic APIs for defining their nodes.

Changes from V1:
- Add generic property for pins and functions in pinconf-generic.
- Add APIs to map the DT and subnode.
- Move common utils APIs to the pinctrl-utils from this file.
- Update the binding document accordingly.
Changes from V2:
- Rebased the pinctrl binding doc on top of Stephen's cleanup.
- Rename properties "pinctrl-pins" and "pinctrl-function" to
  "pins" and "function".

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-14 21:00:41 +02:00
Heiko Stübner
5b81d55c4c pinctrl: remove bindings for pinconf options needing more thought
Some options currently take arguments in unspecified driver-specific units.
As pointed out by Stephen Warren, driver specific values should not be part
of generic devicetree bindings describing the hardware.

Therefore remove the critical bindings again, before they become part of
an official release.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25 15:34:55 +02:00
Heiko Stübner
256aeb6487 pinctrl: set unit for debounce time pinconfig to usec
Currently the debounce time pinconfig option uses an unspecified
"time units" unit. As pinconfig options should use SI units and a
real unit is also necessary for generic dt bindings, change it
to usec. Currently no driver is using the generic pinconfig option
for this, so the unit change is safe to do.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25 15:34:44 +02:00
Heiko Stübner
6abab2d4be pinctrl: dynamically alloc temp array when parsing dt pinconf options
Allocating the temorary array in pinconf_generic_parse_dt_config on stack
might cause problems later on, when the number of options grows over time.
Therefore also allocate this array dynamically to be on the safe side.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 18:18:31 +02:00
Heiko Stübner
e4a8844c04 pinctrl: handle zero found dt pinconfig properties better
This adds a shortcut when no valid pinconf properties are found
in the parsed dt node, to set the values immediately and return.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 18:18:31 +02:00
Heiko Stübner
9ee1f7d266 pinctrl: clarify some dt pinconfig options
The bias-pull-* options use values > 0 to indicate that the pull should
be activated and optionally also indicate the strength of the pull.
Therefore use an default value of 1 for these options.

Split the low-power-mode option into low-power-enable and -disable.

Update the documentation to describe the param arguments better.

Reported-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 18:18:30 +02:00
Heiko Stübner
7db9af4b6e pinctrl: add function to parse generic pinconfig properties from a dt node
pinconf_generic_parse_dt_config() takes a node as input and generates an
array of generic pinconfig values from the properties of this node.

As I couldn't find a mechanism to count the number of properties of a node
the function uses internally an array to accept one of parameter and copies
the real present options to a smaller variable at its end.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:57:32 +02:00
Heiko Stübner
7970cb770d pinctrl: add pinconf-generic define for a pin-default pull
There exist controllers that don't support to set the pull to up or down
separately but instead automatically set the pull direction based on
embedded knowledge inside the controller, for example depending on the
selected mux function of the pin.

Therefore this patch adds another config option to use this default
pull-state for a pin where it is not possible to know or decide if the
pin will be pulled up or down.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:51 +02:00
James Hogan
a2df4269ca pinconf-generic: add BIAS_BUS_HOLD pinconf
Add a new PIN_CONFIG_BIAS_BUS_HOLD pin configuration for a bus holder
pin mode (also known as bus keeper, or repeater). This is a weak latch
which drives the last value on a tristate bus. Another device on the bus
can drive the bus high or low before going tristate to change the value
driven by the pin.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:50 +02:00
James Hogan
73ae368cd3 pinconf-generic: add drive strength to debugfs output
Add the drive strength pinconf to debugfs output (with the unit "mA").

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:50 +02:00
Sachin Kamat
b6465424a6 pinctrl: generic: Fix checkpatch errors
Fixes the following type of checkpatch errors:
ERROR: space required before the open parenthesis '('

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27 22:49:13 +01:00
Sachin Kamat
1ef465c059 pinctrl: generic: Make 'conf_items' static
'conf_items' is used only in this file. Silences the below
sparse warning:
drivers/pinctrl/pinconf-generic.c:37:24: warning:
symbol 'conf_items' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27 22:48:08 +01:00
Haojian Zhuang
9cfd1724f0 pinctrl: generic: dump pin configuration
Add the support of dumping pin configuration.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07 05:27:30 +01:00
Haojian Zhuang
ea27c39617 pinctrl: generic: rename input schmitt disable
Rename PIN_CONFIG_INPUT_SCHMITT_DISABLE to
PIN_CONFIG_INPUT_SCHMITT_ENABLE. It's used to make it more generialize.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-15 09:52:29 +01:00
Haojian Zhuang
684697cbbc pinctrl: generic: add slew rate config parameter
Add PIN_CONFIG_SLEW_RATE parameter into pinconf-generic driver.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-21 15:43:42 +01:00
Linus Walleij
483f33f63c pinctrl: add pinconf-generic defines for output
This adds a definition of a generic output configuration
for a certain pin when using the generic pin configuration
library. Whereas driving pins low/high is usually a GPIO
business, you may want to set up pins into a default state
using hogs, and never touch them again. This helps out
with that scenario.

Based on a patch from Patrice Chotard.

Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-11 21:49:20 +01:00
Haojian Zhuang
2ccb0bcfb0 pinctrl: generic: add input schmitt disable parameter
In Marvell PXA/MMP silicons, input schmitt disable value is 0x40, not 0.
So append new config parameter -- input schmitt disable.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21 08:55:26 +01:00
Linus Walleij
394349f778 pinctrl: introduce generic pin config
This is a split-off from the earlier patch set which adds generic
pin configuration for the pin controllers that want it. Since
we may have a system with mixed generic and custom pin controllers,
we pass a boolean in the pin controller ops vtable to indicate
if it is generic.

ChangeLog v1->v5:
- Follow parent patch versioning number system.
- Document the semantic meaning of return values from pin config
  get functions, so we can iterate over pins and check their
  properties from debugfs as part of the generic config code.
- Use proper cast functions in the generic debugfs pin config
  file.
- Expand generic config to optionally cover groups too.
ChangeLog v5->v6:
- Update to match underlying changes.
ChangeLog v6->v7:
- Drop DRIVE_OFF parameter, use bias high impedance for this
- Delete argument for drive modes push-pull, od and os. These
  are now just state transitions.
- Delete slew rate rising/falling due to discussions on on
  proper semantics
- Drop config wakeup, struct irq_chip does this for now, add
  back if need be.
- Set PIN_CONFIG_END to 0x7fff making room for custom config
  parameters from 0x8000 and up.
- Prefix accessor functions with pinconf_
2012-03-12 22:49:02 +01:00