Commit Graph

15 Commits

Author SHA1 Message Date
Collin Walling
efaa83a373 KVM: selftests: sync_regs test for diag318
The DIAGNOSE 0x0318 instruction, unique to s390x, is a privileged call
that must be intercepted via SIE, handled in userspace, and the
information set by the instruction is communicated back to KVM.

To test the instruction interception, an ad-hoc handler is defined which
simply has a VM execute the instruction and then userspace will extract
the necessary info. The handler is defined such that the instruction
invocation occurs only once. It is up to the caller to determine how the
info returned by this handler should be used.

The diag318 info is communicated from userspace to KVM via a sync_regs
call. This is tested during a sync_regs test, where the diag318 info is
requested via the handler, then the info is stored in the appropriate
register in KVM via a sync registers call.

If KVM does not support diag318, then the tests will print a message
stating that diag318 was skipped, and the asserts will simply test
against a value of 0.

Signed-off-by: Collin Walling <walling@linux.ibm.com>
Link: https://lore.kernel.org/r/20201207154125.10322-1-walling@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-12-10 13:36:05 +01:00
Christian Borntraeger
3203a01737 selftests: KVM: s390: check for registers to NOT change on reset
Normal reset and initial CPU reset do not clear all registers. Add a
test that those registers are NOT changed.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:59:09 +01:00
Christian Borntraeger
b0435a12a6 selftests: KVM: s390: test more register variants for the reset ioctl
We should not only test the oneregs or the get_(x)regs interfaces but
also the sync_regs. Those are usually the canonical place for register
content.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:59:08 +01:00
Christian Borntraeger
41cbed5b07 selftests: KVM: s390: fix early guest crash
The guest crashes very early due to changes in the control registers
used by dynamic address translation. Let us use different registers
that will not crash the guest.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:59:07 +01:00
Andrew Jones
d0aac3320d KVM: selftests: Use consistent message for test skipping
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:59:05 +01:00
Christian Borntraeger
6a46fcf92f selftests: KVM: s390: fix format strings for access reg test
acrs are 32 bit and not 64 bit.

Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:59:03 +01:00
Christian Borntraeger
53362fe930 selftests: KVM: s390: fixup fprintf format error in reset.c
value is u64 and not string.

Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:59:03 +01:00
Andrew Jones
244c6b6df9 KVM: selftests: Convert some printf's to pr_info's
We leave some printf's because they inform the user the test is being
skipped. QUIET should not disable those. We also leave the printf's
used for help text.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:57:07 +01:00
Pierre Morel
b2ff728bae selftests: KVM: testing the local IRQs resets
Local IRQs are reset by a normal cpu reset.  The initial cpu reset and
the clear cpu reset, as superset of the normal reset, both clear the
IRQs too.

Let's inject an interrupt to a vCPU before calling a reset and see if
it is gone after the reset.

We choose to inject only an emergency interrupt at this point and can
extend the test to other types of IRQs later.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
[minor fixups]
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-7-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-01-31 13:17:21 +01:00
Janosch Frank
b25d4cb43f selftests: KVM: s390x: Add reset tests
Test if the registers end up having the correct values after a normal,
initial and clear reset.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-6-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-01-31 13:17:21 +01:00
Christian Borntraeger
efec8d219f selftests: kvm: make syncregs more reliable on s390
similar to commit 2c57da356800 ("selftests: kvm: fix sync_regs_test with
newer gccs") and commit 204c91eff7 ("KVM: selftests: do not blindly
clobber registers in guest asm") we better do not rely on gcc leaving
r11 untouched.  We can write the simple ucall inline and have the guest
code completely as small assembler function.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2019-10-10 13:18:35 +02:00
Thomas Huth
81cb736c0c KVM: selftests: Test invalid bits in kvm_valid_regs and kvm_dirty_regs on s390x
Now that we disallow invalid bits in kvm_valid_regs and kvm_dirty_regs
on s390x, too, we should also check this condition in the selftests.
The code has been taken from the x86-version of the sync_regs_test.

Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/lkml/20190904085200.29021-3-thuth@redhat.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2019-09-04 15:38:05 +02:00
Thomas Huth
be6f55a60d KVM: selftests: Add a test for the KVM_S390_MEM_OP ioctl
Check that we can write and read the guest memory with this s390x
ioctl, and that some error cases are handled correctly.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/r/20190829130732.580-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-08-29 16:09:11 +02:00
Thomas Huth
f90f57b397 KVM: selftests: Implement ucall() for s390x
On s390x, we can neither exit via PIO nor MMIO, but have to use an
instruction like DIAGNOSE. Now that ucall() is implemented, we can
use it in the sync_reg_test on s390x, too.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20190731151525.17156-3-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-08-02 15:44:23 +02:00
Thomas Huth
ee1563f428 KVM: selftests: Add the sync_regs test for s390x
The test is an adaption of the same test for x86. Note that there
are some differences in the way how s390x deals with the kvm_valid_regs
in struct kvm_run, so some of the tests had to be removed. Also this
test is not using the ucall() interface on s390x yet (which would need
some work to be usable on s390x), so it simply drops out of the VM with
a diag 0x501 breakpoint instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-8-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-06-04 14:05:38 +02:00