Name "guess unwinder" comes from x86, it scans the stack and reports
every kernel text address it finds.
Unwinders can be used by dump_stack() and other stacktrace functions.
Three stages when we do unwind,
1) unwind_start(), the prapare of unwinding, fill unwind_state.
2) unwind_done(), judge whether the unwind process is finished or not.
3) unwind_next_frame(), unwind the next frame.
Add get_stack_info() to get stack info. At present we have irq stack and
task stack. The next_sp is the key info between two types of stacks.
Dividing unwinder helps to add new unwinders in the future.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
We test 20 million times of getcpu(), the real syscall version take 25
seconds, while the vsyscall version take only 2.4 seconds.
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Loongson64 based systems are PC-like systems which use PCI/PCIe as its
I/O bus, This patch adds the PCI host controller support for LoongArch.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Parse MADT to get multi-processor information, in order to fix the boot
problem and cpu-hotplug problem for SMP platform.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The kernel entry points of both boot CPU (i.e., kernel_entry) and non-
boot CPUs (i.e., smpboot_entry) may be physical address from BootLoader
(in DA mode or identity-mapping PG mode). So we should jump to the link
address before PG enabled (because DA is disabled at the same time) and
just after DMW configured.
Specifically: With some older firmwares, non-boot CPUs started with PG
enabled, but this need firmware cooperation in the form of a temporary
page table, which is deemed unnecessary. OTOH, latest firmware versions
configure the non-boot CPUs to start in DA mode, so kernel-side changes
are needed.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The return value from the call to get_timer_irq() is int, which can be
a negative error code. However, the return value is being assigned to an
unsigned int variable 'irq', so making 'irq' an int.
Eliminate the following coccicheck warning:
./arch/loongarch/kernel/time.c:146:5-8: WARNING: Unsigned expression compared with zero: irq < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
1, ACPI, EFI and SMP are mandatories for LoongArch, select them
unconditionally to avoid various build errors for 'make randconfig'.
2, Move the MMU_GATHER_MERGE_VMAS selection to the correct place.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
- A smatch warning fix for DM writecache locking in writecache_map.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmL1q20ACgkQxSPxCi2d
A1rZvggAxFFaj2V12TmJZ/D75ptDFfqsfEomsLKGqjq0pIYfhawWBnz0IgHd34vC
6Qy8bgoUGFQaexruFw6AjJQ3goaTJfFMy1/Nrf5Mvs7URlk7ckWgSz5ng9BRvePx
Qyp03BKjtWpu++uKJpKq1DrHXTor0J73dVkHCnAcqHHKmaiZdy9gf+5OdUMYcBX6
rNwLqlSqGGMG2TQp6/tUdytUsB2GyhAPs/uhTtTDa0glTwRvYWU0dhacuBqngLwr
G+UkPbE23s3NWMhvCK9qbTPT79prEgLrC/WXioeFBxJaV4LbXY/6hZ3817JpwjRv
aDxFXr8V6lWLJEeYY0MxImAGE2DUiA==
=yCb1
-----END PGP SIGNATURE-----
Merge tag 'for-6.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- A few fixes for the DM verity and bufio changes in this merge window
- A smatch warning fix for DM writecache locking in writecache_map
* tag 'for-6.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm bufio: fix some cases where the code sleeps with spinlock held
dm writecache: fix smatch warning about invalid return from writecache_map
dm verity: fix verity_parse_opt_args parsing
dm verity: fix DM_VERITY_OPTS_MAX value yet again
dm bufio: simplify DM_BUFIO_CLIENT_NO_SLEEP locking
gem:
- Annotate WW context in error paths
shmem-helper:
- Add missing vunmap in error paths
-----BEGIN PGP SIGNATURE-----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=Tpmn
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not much to squeeze into rc1, just two small fixes, one for core gem
and one for shmem-helpers:
gem:
- Annotate WW context in error paths
shmem-helper:
- Add missing vunmap in error paths"
* tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drm:
drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error
drm/shmem-helper: Add missing vunmap on error
and move the structure definitions into cached_dir.h
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Solution is to send lease break ack immediately even in case of
deferred close handles to avoid lease break request timing out
and let deferred closed handle gets closed as scheduled.
Later patches could optimize cases where we then close some
of these handles sooner for the cases where lease break is to 'none'
Cc: stable@kernel.org
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Deferred close can be a very useful feature for allowing
caching data for read, and for minimizing the number of
reopens needed for a file that is repeatedly opened and
close but there are workloads where its default (1 second,
similar to actimeo/acregmax) is much too small.
Allow the user to configure the amount of time we can
defer sending the final smb3 close when we have a
handle lease on the file (rather than forcing it to depend
on value of actimeo which is often unrelated, and less safe).
Adds new mount parameter "closetimeo=" which is the maximum
number of seconds we can wait before sending an SMB3
close when we have a handle lease for it. Default value
also is set to slightly larger at 5 seconds (although some
other clients use larger default this should still help).
Suggested-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
They are the same right now but tcon-> will later point to a different
type of struct containing a list of cfids.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since the new display option 'peer' is introduced, this patch is to
update the documentation to reflect it.
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-16-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since Arm64 arch doesn't support HITMs flags, this patch changes to use
'peer' as default display if user doesn't specify any type; for other
arches, it still uses 'tot' as default display type if user doesn't
specify it.
This patch changes to call perf_session__new() in an earlier place, so
session environment can be initialized ahead and arch info can be used
for setting display type.
Suggested-by: Ali Saidi <alisaidi@amazon.com>
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-15-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The display type is shown by combination the display string array and a
suffix string "HITMs", which is not friendly to extend display for other
sorting type (e.g. extension for peer operations).
This patch moves the suffix string "HITMs" into display string array for
HITM types, so it can allow us to not necessarily to output string
"HITMs" for new incoming display type.
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-13-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The node header array contains 3 items, each item is used for one of
the 3 flavors for node accessing info. To extend sorting on other
snooping type and not always stick to HITMs, the second header string
"Node{cpus %hitms %stores}" should be adjusted (e.g. it's changed as
"Node{cpus %peer %stores}").
For this reason, this patch changes the node header array to three
flat variables and uses switch-case in function setup_nodes_header(),
thus it is easier for altering the header string.
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-12-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use more general naming for the main sort dimension, this can allow us
not to sort only on HITM snoop type, so it can be extended to support
other costly snooping operations. So rename the dimension to the prefix
'percent_costly_".
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-11-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf c2c tool has an assumption that it heavily depends on HITM snoop
type to detect cache false sharing, unfortunately, HITM is not supported
on some architectures.
Essentially, perf c2c tool wants to find some very costly snooping
operations for false cache sharing, this means it's not necessarily
to stick using HITM tags and we can explore other snooping types
(e.g. SNOOPX_PEER).
For this reason, this patch renames HITM related display macros with
suffix '_HITM', so it can be distinct if later add more display types
for on other snooping type.
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-10-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds two dimensions for the mean value of peer operations.
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-9-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds dimensions of peer ops, which will be used for Shared
cache line distribution pareto.
It adds the percentage dimensions for local and remote peer operations,
and the dimensions for accounting operation numbers which is used for
stdio mode.
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-8-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds three dimensions for peer load operations of 'lcl_peer',
'rmt_peer' and 'tot_peer'. These three dimensions will be used in the
shared data cache line table.
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-7-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch outputs statistics for peer snooping for whole trace events
and global shared cache line.
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the flag PERF_MEM_SNOOPX_PEER is added to support cache snooping
from peer cache line, it can come from a peer core, a peer cluster, or
a remote NUMA node.
This patch adds statistics for the flag PERF_MEM_SNOOPX_PEER. Note, we
take PERF_MEM_SNOOPX_PEER as an affiliated info, it needs to cooperate
with cache level statistics. Therefore, we account the load operations
for both the cache level's metrics (e.g. ld_l2hit, ld_llchit, etc.) and
peer related metrics when flag PERF_MEM_SNOOPX_PEER is set.
So three new metrics are introduced: 'lcl_peer' is for local cache
access, the metric 'rmt_peer' is for remote access (includes remote DRAM
and any caches in remote node), and the metric 'tot_peer' is accounting
the sum value of 'lcl_peer' and 'rmt_peer'.
Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When synthesizing data from SPE, augment the type with source information
for Arm Neoverse cores. The field is IMPLDEF but the Neoverse cores all use
the same encoding. I can't find encoding information for any other SPE
implementations to unify their choices with Arm's thus that is left for
future work.
This change populates the mem_lvl_num for Neoverse cores as well as the
deprecated mem_lvl namespace.
Reviewed-by: German Gomez <german.gomez@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ali Saidi <alisaidi@amazon.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-4-leo.yan@linaro.org
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a flag to the 'perf mem' data struct to signal that a request caused
a cache-to-cache transfer of a line from a peer of the requestor and
wasn't sourced from a lower cache level.
The line being moved from one peer cache to another has latency and
performance implications.
On Arm64 Neoverse systems the data source can indicate a cache-to-cache
transfer but not if the line is dirty or clean, so instead of
overloading HITM define a new flag that indicates this type of transfer.
Committer notes:
This really is not syncing with the kernel since the patch to the kernel
wasn't merged.
But we're going ahead of this as it seems trivial and is just a matter
of the perf kernel maintainers to give their ack or for us to find
another way of expressing this in the perf records synthesized in
userspace from the ARM64 hardware traces.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ali Saidi <alisaidi@amazon.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-2-leo.yan@linaro.org
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This cures a current problem where tools/perf/util/arm-spe.c isn't
finding a ARM64 specific asm header, so lets add it for now to make
progress.
Adding a .o specific rule seems clunky, lets try and find if this is
really the right solution.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/lkml/20220811124825.GA868014@leoy-huanghe.lan
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixed few typos and bit fields not aligned with the spec. Define other
related macros that will be useful in the future.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220711174632.4186047-6-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Counter info encoding format is defined by the SBI specificaiton.
KVM implementation of SBI PMU extension will also leverage this definition.
Move the definition to common sbi header file from the sbi pmu driver.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220711174632.4186047-5-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Some of the SBI PMU calls does not pass 64bit arguments
correctly and not under RV32 compile time flags. Currently,
this doesn't create any incorrect results as RV64 ignores
any value in the additional register and qemu doesn't support
raw events.
Fix those SBI calls in order to set correct values for RV32.
Fixes: e999143459 ("RISC-V: Add perf platform driver based on SBI PMU extension")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220711174632.4186047-4-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, riscv_pmu_event_set_period updates the userpage mapping.
However, the caller of riscv_pmu_event_set_period should update
the userpage mapping because the counter can not be updated/started
from set_period function in counter overflow path.
Invoke the perf_event_update_userpage at the caller so that it
doesn't get invoked twice during counter start path.
Fixes: f5bfa23f57 ("RISC-V: Add a perf core library for pmu drivers")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220711174632.4186047-3-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Move common guest options into include files. Use attribute substitution to
customize an example, using "[verse]" to define the block instead of a
"literal" block which does not permit substitution.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220811170411.84154-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf inject' documentation is missing the guestmount option. Add it.
Fixes: 97406a7e4f ("perf inject: Add support for injecting guest sideband events")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220811170411.84154-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf script' documentation is missing several options relating to
guests. Add them.
Fixes: 15a108af1a ("perf script: Allow specifying the files to process guest samples")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220811170411.84154-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This series implements Sstc extension support which was ratified
recently. Before the Sstc extension, an SBI call is necessary to
generate timer interrupts as only M-mode have access to the timecompare
registers. Thus, there is significant latency to generate timer
interrupts at kernel. For virtualized enviornments, its even worse as
the KVM handles the SBI call and uses a software timer to emulate the
timecomapre register.
Sstc extension solves both these problems by defining a
stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to
program a timer and recieve interrupt without supervisor execution
enviornment (M-mode/HS mode) intervention.
* palmer/riscv-sstc:
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
RISC-V ISA has sstc extension which allows updating the next clock event
via a CSR (stimecmp) instead of an SBI call. This should happen dynamically
if sstc extension is available. Otherwise, it will fallback to SBI call
to maintain backward compatibility.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220722165047.519994-4-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The ISA extension framework now allows parsing any multi-letter
ISA extension.
Enable that for sstc extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220722165047.519994-3-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch just introduces the required CSR fields related to the
SSTC extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220722165047.519994-2-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
dts files cannot be linked conveniently, thus replace them with literal
formatting.
The links to other rst pages are broken, fix them using the proper syntax.
Fixes: 31df7195b1 ("Documentation: i2c: Add doc for I2C sysfs")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Improve wording in a couple sentences.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[wsa: improved a little more]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In riscv the process of uprobe going to clear spie before exec
the origin insn,and set spie after that.But When access the page
which origin insn has been placed a page fault may happen and
irq was disabled in arch_uprobe_pre_xol function,It cause a WARN
as follows.
There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol.
We can just remove it.
[ 31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488
[ 31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work
[ 31.684929] preempt_count: 0, expected: 0
[ 31.685969] CPU: 2 PID: 76 Comm: work Tainted: G
[ 31.686542] Hardware name: riscv-virtio,qemu (DT)
[ 31.686797] Call Trace:
[ 31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38
[ 31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c
[ 31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c
[ 31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20
[ 31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122
[ 31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a
[ 31.689435] [<ffffffff80822676>] down_read+0x30/0x130
[ 31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446
[ 31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc
Fixes: 74784081aa ("riscv: Add uprobes supported")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220721065820.245755-1-zouyipeng@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use a more professional wording.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
"Comm", "Count", "DataLow", "DataHigh" are not used in this section.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
"as usual" does not mean much here, especially as these are introductory
sections and 10-bit addressing hasn't been introduced yet.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
