commit 320805ab61 upstream.
vmbus_wait_for_unload() may be called in the panic path after other
CPUs are stopped. vmbus_wait_for_unload() currently loops through
online CPUs looking for the UNLOAD response message. But the values of
CONFIG_KEXEC_CORE and crash_kexec_post_notifiers affect the path used
to stop the other CPUs, and in one of the paths the stopped CPUs
are removed from cpu_online_mask. This removal happens in both
x86/x64 and arm64 architectures. In such a case, vmbus_wait_for_unload()
only checks the panic'ing CPU, and misses the UNLOAD response message
except when the panic'ing CPU is CPU 0. vmbus_wait_for_unload()
eventually times out, but only after waiting 100 seconds.
Fix this by looping through *present* CPUs in vmbus_wait_for_unload().
The cpu_present_mask is not modified by stopping the other CPUs in the
panic path, nor should it be.
Also, in a CoCo VM the synic_message_page is not allocated in
hv_synic_alloc(), but is set and cleared in hv_synic_enable_regs()
and hv_synic_disable_regs() such that it is set only when the CPU is
online. If not all present CPUs are online when vmbus_wait_for_unload()
is called, the synic_message_page might be NULL. Add a check for this.
Fixes: cd95aad557 ("Drivers: hv: vmbus: handle various crash scenarios")
Cc: stable@vger.kernel.org
Reported-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/1684422832-38476-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec97e11298 upstream.
Commit 572086325c ("Drivers: hv: vmbus: Cleanup synic memory free path")
says "Any memory allocations that succeeded will be freed when the caller
cleans up by calling hv_synic_free()", but if the get_zeroed_page() in
hv_synic_alloc() fails, currently hv_synic_free() is not really called
in vmbus_bus_init(), consequently there will be a memory leak, e.g.
hv_context.hv_numa_map is not freed in the error path. Fix this by
updating the goto labels.
Cc: stable@kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Fixes: 4df4cb9e99 ("x86/hyperv: Initialize clockevents earlier in CPU onlining")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230504224155.10484-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1eb65c8687 ]
relid2channel() assumes vmbus channel array to be allocated when called.
However, in cases such as kdump/kexec, not all relids will be reset by the host.
When the second kernel boots and if the guest receives a vmbus interrupt during
vmbus driver initialization before vmbus_connect() is called, before it finishes,
or if it fails, the vmbus interrupt service routine is called which in turn calls
relid2channel() and can cause a null pointer dereference.
Print a warning and error out in relid2channel() for a channel id that's invalid
in the second kernel.
Fixes: 8b6a877c06 ("Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20230217204411.212709-1-mgamal@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d044ca035 ]
The Hyper-V framebuffer code registers a panic notifier in order
to try updating its fbdev if the kernel crashed. The notifier
callback is straightforward, but it calls the vmbus_sendpacket()
routine eventually, and such function takes a spinlock for the
ring buffer operations.
Panic path runs in atomic context, with local interrupts and
preemption disabled, and all secondary CPUs shutdown. That said,
taking a spinlock might cause a lockup if a secondary CPU was
disabled with such lock taken. Fix it here by checking if the
ring buffer spinlock is busy on Hyper-V framebuffer panic notifier;
if so, bail-out avoiding the potential lockup scenario.
Cc: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Tested-by: Fabio A M Martins <fabiomirmar@gmail.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220819221731.480795-10-gpiccoli@igalia.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25c94b0515 ]
If device_register() returns error in vmbus_device_register(),
the name allocated by dev_set_name() must be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().
Fixes: 09d50ff8a2 ("Staging: hv: make the Hyper-V virtual bus code build")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221119081135.1564691-3-yangyingliang@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f92a4b50f0 ]
In the error path of vmbus_device_register(), device_unregister()
is called, which calls vmbus_device_release(). The latter frees
the struct hv_device that was passed in to vmbus_device_register().
So remove the kfree() in vmbus_add_channel_work() to avoid a double
free.
Fixes: c2e5df616e ("vmbus: add per-channel sysfs info")
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221119081135.1564691-2-yangyingliang@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0880e2cb7 ]
Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V
DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g.
$ cat /proc/iomem
...
f8000000-fffbffff : PCI Bus 0000:00
f8000000-fbffffff : 0000:00:08.0
f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
...
fe0000000-fffffffff : PCI Bus 0000:00
fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
fe0000000-fe07fffff : 2ba2:00:02.0
fe0000000-fe07fffff : mlx4_core
the interesting part is the 'f8000000' region as it is actually the
VM's framebuffer:
$ lspci -v
...
0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller])
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
...
hv_vmbus: registering driver hyperv_drm
hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5
hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console
hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff]
hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active?
Note: "Cannot request framebuffer" is not a fatal error in
hyperv_setup_gen1() as the code assumes there's some other framebuffer
device there but we actually have some other PCI device (mlx4 in this
case) config space there!
The problem appears to be that vmbus_allocate_mmio() can use dedicated
framebuffer region to serve any MMIO request from any device. The
semantics one might assume of a parameter named "fb_overlap_ok"
aren't implemented because !fb_overlap_ok essentially has no effect.
The existing semantics are really "prefer_fb_overlap". This patch
implements the expected and needed semantics, which is to not allocate
from the frame buffer space when !fb_overlap_ok.
Note, Gen2 VMs are usually unaffected by the issue because
framebuffer region is already taken by EFI fb (in case kernel supports
it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI
pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers
load after it. Devices can be brought up in any sequence so let's
resolve the issue by always ignoring 'fb_mmio' region for non-FB
requests, even if the region is unclaimed.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b3d6dd09ff upstream.
DM_STATUS_REPORT expects the numbers of pages in the unit of 4k pages
(HV_HYP_PAGE) instead of guest pages, so to make it work when guest page
sizes are larger than 4k, convert the numbers of guest pages into the
numbers of HV_HYP_PAGEs.
Note that the numbers of guest pages are still used for tracing because
tracing is internal to the guest kernel.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220325023212.1570049-2-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 656c5ba50b ]
In case of invalid sub channel, release cpu lock before returning.
Fixes: a949e86c0d ("Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1654794996-13244-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82cd4bacff ]
vmbus_request_addr() returns 0 (zero) if the transaction ID passed
to as argument is 0. This is unfortunate for two reasons: first,
netvsc_send_completion() does not check for a NULL cmd_rqst (before
dereferencing the corresponding NVSP message); second, 0 is a *valid*
value of cmd_rqst in netvsc_send_tx_complete(), cf. the call of
vmbus_sendpacket() in netvsc_send_pkt().
vmbus_request_addr() has included the code in question since its
introduction with commit e8b7db3844 ("Drivers: hv: vmbus: Add
vmbus_requestor data structure for VMBus hardening"); such code was
motivated by the early use of vmbus_requestor by hv_storvsc. Since
hv_storvsc moved to a tag-based mechanism to generate and retrieve
transaction IDs with commit bf5fd8cae3 ("scsi: storvsc: Use
blk_mq_unique_tag() to generate requestIDs"), vmbus_request_addr()
can be modified to return VMBUS_RQST_ERROR if the ID is 0. This
change solves the issues in hv_netvsc (and makes the handling of
messages with transaction ID of 0 consistent with the semantics
"the ID is not contained in the requestor/invalid ID").
vmbus_next_request_id(), vmbus_request_addr() should still reserve
the ID of 0 for Hyper-V, because Hyper-V will "ignore" (not respond
to) VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED packets/requests with
transaction ID of 0 from the guest.
Fixes: bf5fd8cae3 ("scsi: storvsc: Use blk_mq_unique_tag() to generate requestIDs")
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220419122325.10078-2-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 703f7066f4 upstream.
Since commit
ee3e00e9e7 ("random: use registers from interrupted code for CPU's w/o a cycle counter")
the irq_flags argument is no longer used.
Remove unused irq_flags.
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: linux-hyperv@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit be5802795c ]
Currently there are known potential issues for balloon and hot-add on
ARM64:
* Unballoon requests from Hyper-V should only unballoon ranges
that are guest page size aligned, otherwise guests cannot handle
because it's impossible to partially free a page. This is a
problem when guest page size > 4096 bytes.
* Memory hot-add requests from Hyper-V should provide the NUMA
node id of the added ranges or ARM64 should have a functional
memory_add_physaddr_to_nid(), otherwise the node id is missing
for add_memory().
These issues require discussions on design and implementation. In the
meanwhile, post_status() is working and essential to guest monitoring.
Therefore instead of disabling the entire hv_balloon driver, the
ballooning (when page size > 4096 bytes) and hot-add are disabled
accordingly for now. Once the issues are fixed, they can be re-enable in
these cases.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220325023212.1570049-3-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6cae15b57 ]
When reading a packet from a host-to-guest ring buffer, there is no
memory barrier between reading the write index (to see if there is
a packet to read) and reading the contents of the packet. The Hyper-V
host uses store-release when updating the write index to ensure that
writes of the packet data are completed first. On the guest side,
the processor can reorder and read the packet data before the write
index, and sometimes get stale packet data. Getting such stale packet
data has been observed in a reproducible case in a VM on ARM64.
Fix this by using virt_load_acquire() to read the write index,
ensuring that reads of the packet data cannot be reordered
before it. Preventing such reordering is logically correct, and
with this change, getting stale data can no longer be reproduced.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/1648394710-33480-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f8b577f7b ]
hv_panic_page might contain guest-sensitive information, do not dump it
over to Hyper-V by default in isolated guests.
While at it, update some comments in hyperv_{panic,die}_event().
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20220301141135.2232-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eaa03d3453 upstream.
Following the recommendation in Documentation/memory-barriers.txt for
virtual machine guests.
Fixes: 8b6a877c06 ("Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels")
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20220328154457.100872-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 792f232d57 ]
The vmbus driver relies on the panic notifier infrastructure to perform
some operations when a panic event is detected. Since vmbus can be built
as module, it is required that the driver handles both registering and
unregistering such panic notifier callback.
After commit 74347a99e7 ("x86/Hyper-V: Unload vmbus channel in hv panic callback")
though, the panic notifier registration is done unconditionally in the module
initialization routine whereas the unregistering procedure is conditionally
guarded and executes only if HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE capability
is set.
This patch fixes that by unconditionally unregistering the panic notifier
in the module's exit routine as well.
Fixes: 74347a99e7 ("x86/Hyper-V: Unload vmbus channel in hv panic callback")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220315203535.682306-1-gpiccoli@igalia.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d7286729a ]
For a couple of times I have encountered a situation where
hv_balloon: Unhandled message: type: 12447
is being flooded over 1 million times per second with various values,
filling the log and consuming cycles, making debugging difficult.
Add rate limiting to the message.
Most other Hyper-V drivers already have similar rate limiting in their
message callbacks.
The cause of the floods in my case was probably fixed by 96d9d1fa5c
("Drivers: hv: balloon: account for vmbus packet header in
max_pkt_size").
Fixes: 9aa8b50b2b ("Drivers: hv: Add Hyper-V balloon driver")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220222141400.98160-1-anssi.hannula@bitwise.fi
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1dc2f2b81a upstream.
The hyperv utilities use PTP clock interfaces and should depend a
a kconfig symbol such that they will be built as a loadable module or
builtin so that linker errors do not happen.
Prevents these build errors:
ld: drivers/hv/hv_util.o: in function `hv_timesync_deinit':
hv_util.c:(.text+0x37d): undefined reference to `ptp_clock_unregister'
ld: drivers/hv/hv_util.o: in function `hv_timesync_init':
hv_util.c:(.text+0x738): undefined reference to `ptp_clock_register'
Fixes: 3716a49a81 ("hv_utils: implement Hyper-V PTP source")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: linux-hyperv@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211126023316.25184-1-rdunlap@infradead.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8bc69f8632 ]
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix memory leak by calling kobject_put().
Fixes: c2e5df616e ("vmbus: add per-channel sysfs info")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Juan Vazquez <juvazq@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96d9d1fa5c ]
Commit adae1e931a ("Drivers: hv: vmbus: Copy packets sent by Hyper-V
out of the ring buffer") introduced a notion of maximum packet size in
vmbus channel and used that size to initialize a buffer holding all
incoming packet along with their vmbus packet header. hv_balloon uses
the default maximum packet size VMBUS_DEFAULT_MAX_PKT_SIZE which matches
its maximum message size, however vmbus_open expects this size to also
include vmbus packet header. This leads to 4096 bytes
dm_unballoon_request messages being truncated to 4080 bytes. When the
driver tries to read next packet it starts from a wrong read_index,
receives garbage and prints a lot of "Unhandled message: type:
<garbage>" in dmesg.
Allocate the buffer with HV_HYP_PAGE_SIZE more bytes to make room for
the header.
Fixes: adae1e931a ("Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer")
Suggested-by: Michael Kelley (LINUX) <mikelley@microsoft.com>
Suggested-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Yanming Liu <yanminglr@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20220119202052.3006981-1-yanminglr@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8a7eb2d476 upstream.
Baihua reported an error when boot an ARM64 guest with PAGE_SIZE=64k and
BALLOON is enabled:
hv_vmbus: registering driver hv_balloon
hv_vmbus: probe failed for device 1eccfd72-4b41-45ef-b73a-4a6e44c12924 (-22)
The cause of this is that the ringbuffer size for hv_balloon is not
adjusted with VMBUS_RING_SIZE(), which makes the size not large enough
for ringbuffers on guest with PAGE_SIZE=64k. Therefore use
VMBUS_RING_SIZE() to calculate the ringbuffer size. Note that the old
size (20 * 1024) counts a 4k header in the total size, while
VMBUS_RING_SIZE() expects the parameter as the payload size, so use
16 * 1024.
Cc: <stable@vger.kernel.org> # 5.15.x
Reported-by: Baihua Lu <baihua.lu@microsoft.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20211101150026.736124-1-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On arm64 randconfig builds, hyperv sometimes fails with this
error:
In file included from drivers/hv/hv_trace.c:3:
In file included from drivers/hv/hyperv_vmbus.h:16:
In file included from arch/arm64/include/asm/sync_bitops.h:5:
arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly
In file included from include/asm-generic/bitops/hweight.h:5:
include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration]
include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration]
Include the correct header first.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211018131929.2260087-1-arnd@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The following crash happens when a never-used device is unbound from
uio_hv_generic driver:
kernel BUG at mm/slub.c:321!
invalid opcode: 0000 [#1] SMP PTI
CPU: 0 PID: 4001 Comm: bash Kdump: loaded Tainted: G X --------- --- 5.14.0-0.rc2.23.el9.x86_64 #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090008 12/07/2018
RIP: 0010:__slab_free+0x1d5/0x3d0
...
Call Trace:
? pick_next_task_fair+0x18e/0x3b0
? __cond_resched+0x16/0x40
? vunmap_pmd_range.isra.0+0x154/0x1c0
? __vunmap+0x22d/0x290
? hv_ringbuffer_cleanup+0x36/0x40 [hv_vmbus]
kfree+0x331/0x380
? hv_uio_remove+0x43/0x60 [uio_hv_generic]
hv_ringbuffer_cleanup+0x36/0x40 [hv_vmbus]
vmbus_free_ring+0x21/0x60 [hv_vmbus]
hv_uio_remove+0x4f/0x60 [uio_hv_generic]
vmbus_remove+0x23/0x30 [hv_vmbus]
__device_release_driver+0x17a/0x230
device_driver_detach+0x3c/0xa0
unbind_store+0x113/0x130
...
The problem appears to be that we free 'ring_info->pkt_buffer' twice:
first, when the device is unbound from in-kernel driver (netvsc in this
case) and second from hv_uio_remove(). Normally, ring buffer is supposed
to be re-initialized from hv_uio_open() but this happens when UIO device
is being opened and this is not guaranteed to happen.
Generally, it is OK to call hv_ringbuffer_cleanup() twice for the same
channel (which is being handed over between in-kernel drivers and UIO) even
if we didn't call hv_ringbuffer_init() in between. We, however, need to
avoid kfree() call for an already freed pointer.
Fixes: adae1e931a ("Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210831143916.144983-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmEuJwwTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXp0ICACsx9NtQh1f9xGMClYrbobJfGmiwHVV
uKut/44Vg39tSyZB4mQt3A8YcaQj1Nibo6HVmxJtbKbrKwlTGAiQh5fiOmBOd7Re
/rII/S+CGtAyChI1adHTSL2xdk6WY0c7XQw+IPaERBikG5rO81Y6NLjFZNOv494k
JnG9uGGjAcJWFYylPcLxt4sR/hEfE4KDzsWjWOb5azYgo/RwOan6zYDdkUgocp4A
J+zmgCiME8LLmEV19gn7p4gpX7X9m5mcNgn53eICYPhrBqI0PTWocm6DepCEnrQ+
pEobIagWIMx5Dr7euEJwLxFSN7bdzleVOa4FSfM0zUsEjdbiPH47VQFM
=Vae6
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- make Hyper-V code arch-agnostic (Michael Kelley)
- fix sched_clock behaviour on Hyper-V (Ani Sinha)
- fix a fault when Linux runs as the root partition on MSHV (Praveen
Kumar)
- fix VSS driver (Vitaly Kuznetsov)
- cleanup (Sonia Sharma)
* tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv_utils: Set the maximum packet size for VSS driver to the length of the receive buffer
Drivers: hv: Enable Hyper-V code to be built on ARM64
arm64: efi: Export screen_info
arm64: hyperv: Initialize hypervisor on boot
arm64: hyperv: Add panic handler
arm64: hyperv: Add Hyper-V hypercall and register access utilities
x86/hyperv: fix root partition faults when writing to VP assist page MSR
hv: hyperv.h: Remove unused inline functions
drivers: hv: Decouple Hyper-V clock/timer code from VMbus drivers
x86/hyperv: add comment describing TSC_INVARIANT_CONTROL MSR setting bit 0
Drivers: hv: Move Hyper-V misc functionality to arch-neutral code
Drivers: hv: Add arch independent default functions for some Hyper-V handlers
Drivers: hv: Make portions of Hyper-V init code be arch neutral
x86/hyperv: fix for unwanted manipulation of sched_clock when TSC marked unstable
asm-generic/hyperv: Add missing #include of nmi.h
Commit adae1e931a ("Drivers: hv: vmbus: Copy packets sent by Hyper-V out
of the ring buffer") introduced a notion of maximum packet size and for
KVM and FCOPY drivers set it to the length of the receive buffer. VSS
driver wasn't updated, this means that the maximum packet size is now
VMBUS_DEFAULT_MAX_PKT_SIZE (4k). Apparently, this is not enough. I'm
observing a packet of 6304 bytes which is being truncated to 4096. When
VSS driver tries to read next packet from ring buffer it starts from the
wrong offset and receives garbage.
Set the maximum packet size to 'HV_HYP_PAGE_SIZE * 2' in VSS driver. This
matches the length of the receive buffer and is in line with other utils
drivers.
Fixes: adae1e931a ("Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210825133857.847866-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Update drivers/hv/Kconfig so CONFIG_HYPERV can be selected on
ARM64, causing the Hyper-V specific code to be built. Exclude the
Hyper-V enlightened clocks/timers code from being built for ARM64.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1628092359-61351-6-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vmbus module uses a rotational algorithm to assign target CPUs to
a device's channels. Depending on the timing of different device's channel
offers, different channels of a device may be assigned to the same CPU.
For example on a VM with 2 CPUs, if NIC A and B's channels are offered
in the following order, NIC A will have both channels on CPU0, and
NIC B will have both channels on CPU1 -- see below. This kind of
assignment causes RSS load that is spreading across different channels
to end up on the same CPU.
Timing of channel offers:
NIC A channel 0
NIC B channel 0
NIC A channel 1
NIC B channel 1
VMBUS ID 14: Class_ID = {f8615163-df3e-46c5-913f-f2d2f965ed0e} - Synthetic network adapter
Device_ID = {cab064cd-1f31-47d5-a8b4-9d57e320cccd}
Sysfs path: /sys/bus/vmbus/devices/cab064cd-1f31-47d5-a8b4-9d57e320cccd
Rel_ID=14, target_cpu=0
Rel_ID=17, target_cpu=0
VMBUS ID 16: Class_ID = {f8615163-df3e-46c5-913f-f2d2f965ed0e} - Synthetic network adapter
Device_ID = {244225ca-743e-4020-a17d-d7baa13d6cea}
Sysfs path: /sys/bus/vmbus/devices/244225ca-743e-4020-a17d-d7baa13d6cea
Rel_ID=16, target_cpu=1
Rel_ID=18, target_cpu=1
Update the vmbus CPU assignment algorithm to avoid duplicate CPU
assignments within a device.
The new algorithm iterates num_online_cpus + 1 times.
The existing rotational algorithm to find "next NUMA & CPU" is still here.
But if the resulting CPU is already used by the same device, it will try
the next CPU.
In the last iteration, it assigns the channel to the next available CPU
like the existing algorithm. This is not normally expected, because
during device probe, we limit the number of channels of a device to
be <= number of online CPUs.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626459673-17420-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyper-V clock/timer code in hyperv_timer.c is mostly independent from
other VMbus drivers, but building for ARM64 without hyperv_timer.c
shows some remaining entanglements. A default implementation of
hv_read_reference_counter can just read a Hyper-V synthetic register
and be independent of hyperv_timer.c, so move this code out and into
hv_common.c. Then it can be used by the timesync driver even if
hyperv_timer.c isn't built on a particular architecture. If
hyperv_timer.c *is* built, it can override with a faster implementation.
Also provide stubs for stimer functions called by the VMbus driver when
hyperv_timer.c isn't built.
No functional changes.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626220906-22629-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The check for whether hibernation is possible, and the enabling of
Hyper-V panic notification during kexec, are both architecture neutral.
Move the code from under arch/x86 and into drivers/hv/hv_common.c where
it can also be used for ARM64.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-4-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Architecture independent Hyper-V code calls various arch-specific handlers
when needed. To aid in supporting multiple architectures, provide weak
defaults that can be overridden by arch-specific implementations where
appropriate. But when arch-specific overrides aren't needed or haven't
been implemented yet for a particular architecture, these stubs reduce
the amount of clutter under arch/.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The code to allocate and initialize the hv_vp_index array is
architecture neutral. Similarly, the code to allocate and
populate the hypercall input and output arg pages is architecture
neutral. Move both sets of code out from arch/x86 and into
utility functions in drivers/hv/hv_common.c that can be shared
by Hyper-V initialization on ARM64.
No functional changes. However, the allocation of the hypercall
input and output arg pages is done differently so that the
size is always the Hyper-V page size, even if not the same as
the guest page size (such as with ARM64's 64K page size).
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmDa/58THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXufBB/sGVIp1OhrtRFXeLJGJtbPPJzbh1w+K
hlDxthpN8uW7W7jyQRShiNUVwGX1QUiKBUH5g9oVKYBm0/srup4TivT2PiXPp4mC
7rPM9jcOD0ei9W2Z1/fjQvyorz37pQzq9GMF37FGqPM2mVuCl16QhdF5EqYjipCU
k34MyvjUPudmYot3gdiURyxrUljzw3KLfVXeg1Tpk0mXLZvm6OnyRn9ywgNJb+Pz
wn2+Om3hZCtccF2CUUS1LbMPFF97xy/CdAObyDuJyyXfyY7JFZ/guWBkQpi0tejQ
/+yJFYYZSo1lXV8xxB0t8LR9Vf6OxZNexn+0El4IUO4TZuAJcr4Q6fYp
=yOAz
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
"Just a few minor enhancement patches and bug fixes"
* tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv()
Drivers: hv: Move Hyper-V extended capability check to arch neutral code
drivers: hv: Fix missing error code in vmbus_connect()
x86/hyperv: fix logical processor creation
hv_utils: Fix passing zero to 'PTR_ERR' warning
scsi: storvsc: Use blk_mq_unique_tag() to generate requestIDs
Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer
hv_balloon: Remove redundant assignment to region_start
The extended capability query code is currently under arch/x86, but it
is architecture neutral, and is used by arch neutral code in the Hyper-V
balloon driver. Hence the balloon driver fails to build on other
architectures.
Fix by moving the ext cap code out from arch/x86. Because it is also
called from built-in architecture specific code, it can't be in a module,
so the Makefile treats as built-in even when CONFIG_HYPERV is "m". Also
drivers/Makefile is tweaked because this is the first occurrence of a
Hyper-V file that is built-in even when CONFIG_HYPERV is "m".
While here, update the hypercall status check to use the new helper
function instead of open coding. No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Link: https://lore.kernel.org/r/1622669804-2016-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Sparse warn this:
drivers/hv/hv_util.c:753 hv_timesync_init() warn:
passing zero to 'PTR_ERR'
Use PTR_ERR_OR_ZERO instead of PTR_ERR to fix this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210514070116.16800-1-yuehaibing@huawei.com
[ wei: change %ld to %d ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Use blk_mq_unique_tag() to generate requestIDs for StorVSC, avoiding
all issues with allocating enough entries in the VMbus requestor.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210510210841.370472-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Pointers to ring-buffer packets sent by Hyper-V are used within the
guest VM. Hyper-V can send packets with erroneous values or modify
packet fields after they are processed by the guest. To defend
against these scenarios, return a copy of the incoming VMBus packet
after validating its length and offset fields in hv_pkt_iter_first().
In this way, the packet can no longer be modified by the host.
Signed-off-by: Andres Beltran <lkmlabelt@gmail.com>
Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210408161439.341988-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Variable region_start is set to pg_start but this value is never
read as it is overwritten later on, hence it is a redundant
assignment and can be removed.
Cleans up the following clang-analyzer warning:
drivers/hv/hv_balloon.c:1013:3: warning: Value stored to 'region_start'
is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619691681-86256-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmCIBMIACgkQUqAMR0iA
lPIt9w//bbHUN/JsNtLCs/849oExdUn/thVajrD5yELttYZXhdzbXncNdkGX9tlU
4JmExmUoqKYdN6JhSnrcYvckHj7XXZM7pVh9IdzqRh10MEXIQ+7IUHjQc8034Zs/
W4/oZmfMtBjszap+cJ9hvdp9qaJkPz/fRLGlrbjc1K4hhxDa1gGmeD35SKswGltm
q6RzX3uRl5JbBrYsLoqb28MGYRHhjf2+Pvndoj+5Nn9FtwPSot6jAkyqY5Y6iJlS
W2EsFqOt+Kv7/I93FyQlnXC6Nx7vntmow7knmmGPXDf2BqLb0J8Bxl3fwuzpQoao
nZzL/p9GQ4ZXF6y8gRV8+RzPIcftBdayOswEDGH0LzlTkbAe/9Sq9Lo7a4Z8jxHW
ro0P+PSRK5Ksm7jvpVmSTg+Nt+XqDA5zA1lAorX1UjsyeDDNF9ndQ4C+ZNhCKo54
y+RDgtAArJMIvsHLQ53ReoOct5NnGVNb8G/r3bIAu+Dn6K3nesr6fP1XG8iduseL
yFlLB7w214BQMr2B/C+8lQvj54wWE4lea2+LNvObxC5b8puYj0fEniUxTYP6bcB5
QT+LfTToufYz4US7ggJy6hoEfohifGWVvDHbn9tXmyXotSTHH7pHdYypqY+UO+kl
7BkwzNFCm4qCIKsg8nyJxT2hDOlpcCrQx1dBIjveMqJ0c5+ahXU=
=ovSn
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Stop synchronizing kernel log buffer readers by logbuf_lock. As a
result, the access to the buffer is fully lockless now.
Note that printk() itself still uses locks because it tries to flush
the messages to the console immediately. Also the per-CPU temporary
buffers are still there because they prevent infinite recursion and
serialize backtraces from NMI. All this is going to change in the
future.
- kmsg_dump API rework and cleanup as a side effect of the logbuf_lock
removal.
- Make bstr_printf() aware that %pf and %pF formats could deference the
given pointer.
- Show also page flags by %pGp format.
- Clarify the documentation for plain pointer printing.
- Do not show no_hash_pointers warning multiple times.
- Update Senozhatsky email address.
- Some clean up.
* tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (24 commits)
lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf()
printk: clarify the documentation for plain pointer printing
kernel/printk.c: Fixed mundane typos
printk: rename vprintk_func to vprintk
vsprintf: dump full information of page flags in pGp
mm, slub: don't combine pr_err with INFO
mm, slub: use pGp to print page flags
MAINTAINERS: update Senozhatsky email address
lib/vsprintf: do not show no_hash_pointers message multiple times
printk: console: remove unnecessary safe buffer usage
printk: kmsg_dump: remove _nolock() variants
printk: remove logbuf_lock
printk: introduce a kmsg_dump iterator
printk: kmsg_dumper: remove @active field
printk: add syslog_lock
printk: use atomic64_t for devkmsg_user.seq
printk: use seqcount_latch for clear_seq
printk: introduce CONSOLE_LOG_MAX
printk: consolidate kmsg_dump_get_buffer/syslog_print_all code
printk: refactor kmsg_dump_get_buffer()
...
There is not a consistent pattern for checking Hyper-V hypercall status.
Existing code uses a number of variants. The variants work, but a consistent
pattern would improve the readability of the code, and be more conformant
to what the Hyper-V TLFS says about hypercall status.
Implemented new helper functions hv_result(), hv_result_success(), and
hv_repcomp(). Changed the places where hv_do_hypercall() and related variants
are used to use the helper functions.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1618620183-9967-2-git-send-email-joseph.salisbury@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When running in Azure, disks may be connected to a Linux VM with
read/write caching enabled. If a VM panics and issues a VMbus
UNLOAD request to Hyper-V, the response is delayed until all dirty
data in the disk cache is flushed. In extreme cases, this flushing
can take 10's of seconds, depending on the disk speed and the amount
of dirty data. If kdump is configured for the VM, the current 10 second
timeout in vmbus_wait_for_unload() may be exceeded, and the UNLOAD
complete message may arrive well after the kdump kernel is already
running, causing problems. Note that no problem occurs if kdump is
not enabled because Hyper-V waits for the cache flush before doing
a reboot through the BIOS/UEFI code.
Fix this problem by increasing the timeout in vmbus_wait_for_unload()
to 100 seconds. Also output periodic messages so that if anyone is
watching the serial console, they won't think the VM is completely
hung.
Fixes: 911e1987ef ("Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/1618894089-126662-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
If a malicious or compromised Hyper-V sends a spurious message of type
CHANNELMSG_UNLOAD_RESPONSE, the function vmbus_unload_response() will
call complete() on an uninitialized event, and cause an oops.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210420014350.2002-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Check that enough time has passed such that the modify channel message
has been processed before taking a CPU offline.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210416143449.16185-4-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Introduce the CHANNELMSG_MODIFYCHANNEL_RESPONSE message type, and code
to receive and process such a message.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210416143449.16185-3-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
