The MODULE_DEVICE_TABLE already creates proper alias. Having another
MODULE_ALIAS causes the alias to be duplicated:
$ modinfo cros_ec_dev.ko
alias: platform:cros-ec-dev
srcversion: F84A69D2156719A4F717A76
alias: platform:cros-ec-dev
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The description mentioned AD5520, which is a different device.
Fixed the typo.
Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This update adds new regmap to support the latest EA silicon
which will be selected based on the chip and variant
information read from the device.
Signed-off-by: Carlos de Paula <me@carlosedp.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
RK817 has a power-off bit in SYS_CFG3. Add support for powering
off the PMIC.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The intel_pmt driver shows up as a compile option for all arches but is
32-bit and 64-bit x86 specific.
Add a CONFIG dependency on X86 for intel_pmt.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Northstar's USB 2.0 PHY is part of the CRU MFD.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
CRU has a shared register that is used e.g. to control USB 2.0 PHY block
access. It's a single 32 b register. Document it as syscon so it can be
used with a regmap.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Broadcom's MISC is an MFD hardware block used on some of their SoCs like
bcm63xx and bcm4908. At this point only PCIe reset is fully understood
and documented. More functions may be added later.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Document the properties with regulator supplies for bucks and LDOs. At
least one board uses it (Exynos5250 Arndale).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008114024.135335-1-krzysztof.kozlowski@canonical.com
Convert the MFD part of Samsung S5M8767 PMIC to DT schema format.
Previously the bindings were mostly in mfd/samsung,sec-core.txt.
Since all of bindings for Samsung S2M and S5M family of PMICs were
converted from mfd/samsung,sec-core.txt to respective dtschema file,
remove the former one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008113931.134847-6-krzysztof.kozlowski@canonical.com
Convert the MFD part of Samsung S2MPA01 PMIC to DT schema format.
Previously the bindings were mostly in mfd/samsung,sec-core.txt.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008113931.134847-5-krzysztof.kozlowski@canonical.com
Convert the MFD part of Samsung S2MPS11/S2MPS13/S2MPS14/S2MPS15/S2MPU02
family of PMICs to DT schema format. Previously the bindings were
mostly in mfd/samsung,sec-core.txt.
The conversion copies parts of description from existing bindings
therefore the license is not changed from GPLv2.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008113931.134847-4-krzysztof.kozlowski@canonical.com
Tagged to allow further bindings to rely on these.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmFgkpYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0OPnB/9M7HLzuTV7mkG0buI1vIPDjuSCWsr/
TZ9IuZIy0OmtdcXq9F0VyRq6wy6bVMXVSlrlFQLnrPLFW1/MIqeyPmLJyqwKVYh/
lyrAaHfeKck2S2ususisudBr/Qkg0ZrEX2f1eLC03xBnBEOy3Nl71s/HxbO9n4yt
ZAUk/1/UlmbhQKNlNgMtfXuXtLCGm3GRL30jb4nb/hGj/8Xb0ESmnRmkmZnVi/+H
DgHGHLDeK3Y5ntQx8IwbrPFimlvAGVgfU/ruf7Z6zmpuW2tKKcLE7ZAR8DG5ZRhw
W3WPq6YYUzAhyxgY0U2iO6wrL5rKvo65CbGOvpk9RsCYk2GxQS6BqHWX
=P4cy
-----END PGP SIGNATURE-----
Merge tag 'tags/s2m_s5m_dtschema' into tb-mfd-from-regulator-5.16
regulator/clock: Convert the s2m and s5m DT bindings to schema
Tagged to allow further bindings to rely on these.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This driver supports both the legacy controller (am33xx) and the
extended one (am437x), so let's add a new compatible.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-46-miquel.raynal@bootlin.com
Without the scale, the values returned to the user are just a picture of
the input voltage against the full scale range of the ADC. We need to
provide the actual conversion factor to get milli-Volts values.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-45-miquel.raynal@bootlin.com
The lack of unit in the macro name kind of tricked me when I was
troubleshooting an issue. Physical constants should always get a unit.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-44-miquel.raynal@bootlin.com
Move the checks over the delays provided in the device tree to the
location where these values are read to clarify where they come from.
There are no functional changes besides the device structure used to
display the warnings: let's use the ADC instead of the MFD device.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-43-miquel.raynal@bootlin.com
Gotos jumping to a return statement are not really useful, drop them.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-42-miquel.raynal@bootlin.com
These warnings are reported by checkpatch.pl essentially.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-41-miquel.raynal@bootlin.com
Drop the text license and replace it with an equivalent SPDX license tag
identifier which also matches the MODULE_LICENSE("GPL").
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-40-miquel.raynal@bootlin.com
At least on a am4372, a simple:
$ cat /sys/bus/iio/devices/iio\:deviceX/in_voltage*_raw
can stall forever. It seems that it comes from the fact that the
internal state machine does not have enough time to return to its idle
state in this situation before receiving another request, leading to an
internal stall.
Add a tiadc_wait_idle() helper to ensure no new conversion is requested
while the FSM is still busy.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-39-miquel.raynal@bootlin.com
There was in the past a typo in the coordinate readouts property. The
bindings have been updated, the touchscreen driver as well and now
supports both. However, the MFD driver that is in charge of verifying
the validity of the property only checks the bogus one. Add support for
the correctly spelled DT property.
Fixes: c9aeb249bf ("Input: ti_am335x_tsc - fix spelling mistake in TSC/ADC DT binding")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-38-miquel.raynal@bootlin.com
Introduce a new compatible that has another set of driver data,
targeting am437x SoCs with a magnetic reader instead of the
touchscreen and a more featureful set of registers.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-37-miquel.raynal@bootlin.com
One way of knowing which hardware we are dealing with is to check the
compatible string. When this must be done at several places, it's best
and certainly more clear to use a helper for that.
Introduce ti_adc_with_touchscreen() to indicate if there is a touchscreen
controller available (meaning it's an am33xx-like ADC). This helper does
not indicate if it is actually used (that is the purpose of the use_tsc
boolean).
Introducing this helper helps making a difference in the code between
what is generic to both types of ADCs and what is specific to the am33xx
hardware before introducing support for the am437x hardware.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-36-miquel.raynal@bootlin.com
Just checking the number of wires will soon not be enough, add a boolean
to indicate the actual use or not of the touchscreen.
Certain checks only make sense when there is a touchscreen wired. Make
these checks explicitly depend on the presence of the touchscreen.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-35-miquel.raynal@bootlin.com
The error message if we cannot retrieve the clock tells us that the
touchscreen controller clock was unavailable. This is wrong, this is the
"main" clock for the hardware block, it is not specific to the
touchscreen and won't change when we will introduce ADC1/magnetic reader
support so let's correct this comment.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-34-miquel.raynal@bootlin.com
We need to retrieve the number of wires used by the "secondary" device
(the touchscreen or the magnetic reader). Let's rename tsc_wires to
become tscmag_wires to clarify the fact that this variable can be used
in both situations.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-33-miquel.raynal@bootlin.com
While the register list (and names) between ADC0 and ADC1 are pretty
close, the bits inside changed a little bit. To avoid any future
confusion, let's add the TSC prefix when some bits are in a register
that is common to both revisions of the ADC, but are specific to the
am33xx hardware.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-32-miquel.raynal@bootlin.com
This bit is common to all devices (ADC, Touchscreen, Magnetic reader) so
make it clear that it can be used from any location by operating a
mechanical rename:
s/CNTRLREG_TSCSSENB/CNTRLREG_SSENB/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-31-miquel.raynal@bootlin.com
Drop useless definitions from the header like the "masks" definitions
which are only used by the following definition.
It could be possible to got even further by removing these definitions
entirely and use FIELD_PREP() macros from the code directly, but while I
have no troubles making these changes in the header, changing the values
in the code directly could darkening a bit the logic and
hardening future git-blames for very little added value IMHO (but this
is of course a personal taste).
Certain macros are using GENMASK() to define the value of a particular
field, while this is purely "by chance" that the value and the mask have
the same value. In this case, drop the "mask" definition, use
FIELD_PREP() and GENMASK() in the macro defining the field, and use the
new macro to define the particular value by feeding directly the actual
number advertised in the datasheet into that macro, as in:
-#define STEPCONFIG_RFM_VREFN GENMASK(24, 23)
-#define STEPCONFIG_RFM(val) FIELD_PREP(STEPCONFIG_RFM_VREFN, (val))
+#define STEPCONFIG_RFM(val) FIELD_PREP(GENMASK(24, 23), (val))
+#define STEPCONFIG_RFM_VREFN STEPCONFIG_RFM(3)
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-30-miquel.raynal@bootlin.com
Clearly define the maximum open delay and sample delay. Use these
definitions in place of a mask (which works because this is the first
field in the register) and an open-coded value. While at it reword a
little bit the error messages to make them look clearer and similar.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-29-miquel.raynal@bootlin.com
Clean the ti_am335x_tscadc.h header by:
* converting masks to GENMASK()
* converting regular shifts to BIT()
* using FIELD_PREP() when relevant
Sometimes reorder the lines to be able to use the relevant bitmask.
Mind the s/%d/%ld/ change in a log due to the type change following the
use of FIELD_PREP() in the header.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-28-miquel.raynal@bootlin.com
The STEP ENABLE definitions are highly unclear and not used so drop them.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-27-miquel.raynal@bootlin.com
Before adding another frequency with even more zeroes, use the
HZ_PER_MHZ macro to clarify the number.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-26-miquel.raynal@bootlin.com
Drop the text license and replace it with an equivalent SPDX license tag
identifier.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-24-miquel.raynal@bootlin.com
Instead of deriving in the probe and in the resume path the value of the
ctrl register, let's do it only once in the probe, save the value of
this register (all but the subsystem enable bit) in the driver's
structure and use it from the resume callback.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-23-miquel.raynal@bootlin.com
TI AM335X TRM [1] states that most of the configuration should be set in
the control register in the first place, before actually enabling the
hardware with the subsystem enable bit.
So far only half of the configuration was made in the first step (before
enabling the "subsystem"), which does not make really sense. Also, the
probe and the resume patch were acting differently. Let's harmonize all
this by following these steps:
1/ Configure the CLKDIV register
2/ Configure the CTRL register
3/ Configure the idle configuration
4/ Really enable the device by rewriting the CTRL register with the
subsystem enable bit set.
[1] https://www.ti.com/lit/pdf/spruh73
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-22-miquel.raynal@bootlin.com
The idle register is valid no matter if the touchscreen is used or not,
let's always configure it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-21-miquel.raynal@bootlin.com
Keeping the count of tsc_cells and adc_cells is completely redundant, we
can derive this information from other variables. Plus, these variables
are not used anywhere else now. Let's get rid of them.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-20-miquel.raynal@bootlin.com
Use the number of touchscreen wires (tsc_wires) instead of the flag
indicating a touchscreen cell (tsc_cell) to mimic the logic from the
probe.
Besides keeping a certain harmony in the driver, the main benefit is
that we are going to simplify the number of entries in the main MFD
structure and tsc_cell can now be removed more easily.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-19-miquel.raynal@bootlin.com
So far every sub-cell parameter in this driver was hardcoded: cell name,
cell compatible, specific clock name and desired clock frequency.
As we are about to introduce support for ADC1/magnetic reader, we need a
bit of flexibility. Let's add a driver data structure which will contain
these information.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-18-miquel.raynal@bootlin.com
Allocating the driver structure should be done earlier in the probe so
that we can used its members from the beginning.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-17-miquel.raynal@bootlin.com
Let's rewrite this on a single line, it does not hurt the readability
and saves a useless temporary variable.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-16-miquel.raynal@bootlin.com
There is a single clock available in our node, which is named
"fck". The clock handler then points to adc_tsc_fck but no need to point
directly to it and do a full tree search.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-15-miquel.raynal@bootlin.com
The comment misses the main information which is that we assume that a
sample takes 15 ADC clock cycles to be generated. Let's take the
occasion to rework a little bit this comment.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-14-miquel.raynal@bootlin.com
