The ACPI in some SoundWire laptops has a spk-id-gpios property but
it points to the wrong Device node. This patch adds a workaround to
try to get the GPIO directly from the correct Device node.
If the attempt to get the GPIOs from the property fails, the workaround
looks for the SDCA node "AF01", which is where the GpioIo resource is
defined. If this exists, a spk-id-gpios mapping is added to that node
and then the GPIO is got from that node using the property.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240209111840.1543630-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
Align the IPC4 firmware path/name and the topology path to the documentation:
default_fw_path: intel/sof-ipc4/{platform_name}
default_lib_path: intel/sof-ipc4-lib/{platform_name}
default_tplg_path: intel/sof-ipc4-tplg
default_fw_filename: sof-{platform_name}.ri
Tiger Lake and Lunar Lake support is not yet available via the official
firmware release, the paths can be changed now to avoid misalignment in the
future.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
ASoC: SOF: Intel: pci-lnl: Change the topology path to
intel/sof-ipc4-tplg
sound/soc/sof/intel/pci-lnl.c | 2 +-
sound/soc/sof/intel/pci-tgl.c | 64 +++++++++++++++++------------------
2 files changed, 33 insertions(+), 33 deletions(-)
--
2.43.0
commit 74ad8ed651 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops")
introduced a new allocation before the upper bounds check in
do_rx_work. As a result A DSP can cause bad allocations if spewing
garbage.
Fixes: 74ad8ed651 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops")
Reported-by: Tim Van Patten <timvp@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213123834.4827-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.
If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.
If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.
Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot.
Link: https://github.com/thesofproject/sof/issues/8721
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
clang-16 points out a mismatch in function types that was hidden
by a typecast:
sound/soc/qcom/qdsp6/q6apm-dai.c:355:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
355 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler, prtd, graph_id);
sound/soc/qcom/qdsp6/q6apm-dai.c:499:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
499 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler_compr, prtd, graph_id);
The only difference here is the 'payload' argument, which is not even
used in this function, so just fix its type and remove the cast.
Fixes: 88b60bf047 ("ASoC: q6dsp: q6apm-dai: Add open/free compress DAI callbacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/r/20240213101105.459402-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware release which going to introduce support for Lunar Lake will
use the documented default topology directory for IPC4:
intel/sof-ipc4-tplg
Change the default path accordingly before sof-bin (sof-firmware) release
includes Lunar Lake firmware and topologies.
Link: https://github.com/thesofproject/sof-docs/blob/master/getting_started/intel_debug/introduction.rst#2-topology-file
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Mengdong Lin <mengdong.lin@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240213080418.21256-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The currently used paths and firmware name reflects the reference firmware
convention:
default_fw_path: intel/avs/{platform_name}
default_lib_path: intel/avs-lib/{platform_name}
default_tplg_path: intel/avs-tplg
default_fw_filename: dsp_basefw.bin
The SOF supports building the firmware for cAVS2.5 platforms using IPC4 and
it is the preferred IPC4 implementation to be used on these devices.
Change the paths and firmware names to reflect this:
default_fw_path: intel/sof-ipc4/{platform_name}
default_lib_path: intel/sof-ipc4-lib/{platform_name}
default_tplg_path: intel/sof-ipc4-tplg
default_fw_filename: sof-{platform_name}.ri
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240213080418.21256-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Like many other models, the Lenovo 82UU (Yoga Slim 7 Pro 14ARH7)
needs a quirk entry for the internal microphone to function.
Signed-off-by: Attila Tőkés <attitokes@gmail.com>
Link: https://msgid.link/r/20240210193638.144028-1-attitokes@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MeeGoPad T8 uses the standard rt5645 jd_mode=3 setting for jack-detect,
but the used jack connector outputs an inverted jack-detect signal.
Add a DMI quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240211212736.179605-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Hans de Goede <hdegoede@redhat.com>:
While testing 6.8 on a Bay Trail device with a ALC5640 codec
I noticed a regression in 6.8 which causes a NULL pointer deref
in probe().
All BYT/CHT Intel machine drivers are affected. Patch 1/2 of
this series fixes all of them.
Patch 2/2 adds some small cleanups to cht_bsw_rt5645.c for
issues which I noticed while working on 1/2.
A recent change in acp_irq_thread() was meant to address a potential race
condition while trying to acquire the hardware semaphore responsible for
the synchronization between firmware and host IPC interrupts.
This resulted in an improper use of the IPC spinlock, causing normal
kernel memory allocations (which may sleep) inside atomic contexts:
1707255557.133976 kernel: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:315
...
1707255557.134757 kernel: sof_ipc3_rx_msg+0x70/0x130 [snd_sof]
1707255557.134793 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp]
1707255557.134855 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp]
1707255557.134904 kernel: ? irq_thread+0xb5/0x1e0
1707255557.134947 kernel: ? __pfx_irq_thread_fn+0x10/0x10
1707255557.134985 kernel: irq_thread_fn+0x23/0x60
Moreover, there are attempts to lock a mutex from the same atomic
context:
1707255557.136357 kernel: =============================
1707255557.136393 kernel: [ BUG: Invalid wait context ]
1707255557.136413 kernel: 6.8.0-rc3-next-20240206-audio-next #9 Tainted: G W
1707255557.136432 kernel: -----------------------------
1707255557.136451 kernel: irq/66-AudioDSP/502 is trying to lock:
1707255557.136470 kernel: ffff965152f26af8 (&sb->s_type->i_mutex_key#2){+.+.}-{3:3}, at: start_creating.part.0+0x5f/0x180
...
1707255557.137429 kernel: start_creating.part.0+0x5f/0x180
1707255557.137457 kernel: __debugfs_create_file+0x61/0x210
1707255557.137475 kernel: snd_sof_debugfs_io_item+0x75/0xc0 [snd_sof]
1707255557.137494 kernel: sof_ipc3_do_rx_work+0x7cf/0x9f0 [snd_sof]
1707255557.137513 kernel: sof_ipc3_rx_msg+0xb3/0x130 [snd_sof]
1707255557.137532 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp]
1707255557.137551 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp]
Fix the issues by reducing the lock scope in acp_irq_thread(), so that
it guards only the hardware semaphore acquiring attempt. Additionally,
restore the initial locking in acp_sof_ipc_irq_thread() to synchronize
the handling of immediate replies from DSP core.
Fixes: 802134c8c2 ("ASoC: SOF: amd: Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handler")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240208234315.2182048-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex
is left locked forever. That may lead to deadlock
when rt5645_jack_detect_work() is called for the second time.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cdba4301ad ("ASoC: rt5650: add mutex to avoid the jack detection failure")
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/r/1707645514-21196-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
4 fixes / cleanups to the rt5645 mc driver's codec_name handling:
1. In the for loop looking for the dai_index for the codec, replace
card->dai_link[i] with cht_dailink[i]. The for loop already uses
ARRAY_SIZE(cht_dailink) as bound and card->dai_link is just a pointer to
cht_dailink using card->dai_link only obfuscates that cht_dailink is being
modified directly rather then say a copy of cht_dailink. Using
cht_dailink[i] also makes the code consistent with other machine drivers.
2. Don't set cht_dailink[dai_index].codecs->name in the for loop,
this immediately gets overridden using acpi_dev_name(adev) directly
below the loop.
3. Add a missing break to the loop.
4. Remove the now no longer used (only set, never read) codec_name field
from struct cht_mc_private.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210134400.24913-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 13f58267cd ("ASoC: soc.h: don't create dummy Component
via COMP_DUMMY()") dummy snd_soc_dai_link.codecs entries no longer
have a name set.
This means that when looking for the codec dai_link the machine
driver can no longer unconditionally run strcmp() on
snd_soc_dai_link.codecs[0].name since this may now be NULL.
Add a check for snd_soc_dai_link.codecs[0].name being NULL to all
BYT/CHT machine drivers to avoid NULL pointer dereferences in
their probe() methods.
Fixes: 13f58267cd ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210134400.24913-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver never uses the IRQ1_CFG register so there's no need to provide
a default value. It's set as a readable register only for debugging
through the regmap registers file.
A system-specific firmware could overwrite this register with a non-default
value. Therefore the driver can't hardcode what the initial value actually
is. As the register is only for debugging the value can be left unknown
until someone wants to read it through debugfs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240209145700.1555950-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the change in the widget free logic to power down the cores only
when the scheduler widgets are freed, we need to ensure that the
scheduler widget is freed only after all the widgets associated with the
scheduler are freed. This is to ensure that the secondary core that the
scheduler is scheduled to run on is kept powered on until all widgets
that need them are in use. While this works well for dynamic pipelines,
in the case of static pipelines the current logic does not take this into
account and frees all widgets in the order they occur in the
widget_list. So, modify this to ensure that the scheduler widgets are freed
only after all other types of widgets in the widget_list are freed.
Link: https://github.com/thesofproject/linux/issues/4807
Fixes: 31ed8da1c8 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240208133432.1688-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite the handling of ASP1 TX mixer mux initialization to prevent a
deadlock during component_remove().
The firmware can overwrite the ASP1 TX mixer registers with
system-specific settings. This is mainly for hardware that uses the
ASP as a chip-to-chip link controlled by the firmware. Because of this
the driver cannot know the starting state of the ASP1 mixer muxes until
the firmware has been downloaded and rebooted.
The original workaround for this was to queue a work function from the
dsp_work() job. This work then read the register values (populating the
regmap cache the first time around) and then called
snd_soc_dapm_mux_update_power(). The problem with this is that it was
ultimately triggered by cs35l56_component_probe() queueing dsp_work,
which meant that it would be running in parallel with the rest of the
ASoC component and card initialization. To prevent accessing DAPM before
it was fully initialized the work function took the card mutex. But this
would deadlock if cs35l56_component_remove() was called before the work job
had completed, because ASoC calls component_remove() with the card mutex
held.
This new version removes the work function. Instead the regmap cache and
DAPM mux widgets are initialized the first time any of the associated ALSA
controls is read or written.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 07f7d6e7a1 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Link: https://lore.kernel.org/r/20240208123742.1278104-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case TDM is set in topology on SSP0, parser will overwrite vindex
value, because it only checks if port is set. Fix this by checking whole
field value.
Fixes: e6d50e474e ("ASoC: Intel: avs: Improve topology parsing of dynamic strings")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240207112624.2132821-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IRQ should be disabled whilst entering and exiting system suspend to
avoid the IRQ handler being called whilst the PM runtime is disabled.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240206113850.719888-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tascodec_init() of the snd-soc-tas2781-comlib module is called from
snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls
request_firmware_nowait() with parameter THIS_MODULE and a cont/callback
from the latter modules.
The latter modules can be removed while their callbacks are running,
resulting in a general protection failure.
Add module parameter to tascodec_init() so request_firmware_nowait() can
be called with the module of the callback.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent changes modified operation-order in the probe() function without
updating its error path accordingly. If snd_hdac_i915_init() exists with
status EPROBE_DEFER the error path must cleanup allocated IRQs before
leaving the scope.
Fixes: 2dddc514b6 ("ASoC: Intel: avs: Move snd_hdac_i915_init to before probe_work.")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240202114901.1002127-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It looks like the "!" character was added accidentally. The
regmap_update_bits_check() function is normally going to succeed. This
means the rest of the function is unreachable and we don't handle the
situation where "changed" is true correctly.
Fixes: 07f7d6e7a1 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/0c254c07-d1c0-4a5c-a22b-7e135cab032c@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These patches fixe various things that were undocumented, unknown or
uncertain when the original driver code was written. And also a few
things that were just bugs.
If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.
The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1a1c3d794e ("ASoC: cs35l56: Use PCI SSID as the firmware UID")
Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check during initialization whether the firmware is already patched.
If so, include the firmware version in the wm_adsp fwf_name string.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if FIRMWARE_MISSING == 0.
Including the firmware version in the fwf_name string will
qualify the firmware file name:
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Put the silicon revision and secured flag in the wm_adsp fwf_name
string instead of including them in the part string.
This changes the format of the firmware name string from
cs35l56[s]-rev-misc[-system_name]
to
cs35l56-rev[-s]-misc[-system_name]
No firmware files have been published, so this doesn't cause a
compatibility break.
Silicon revision and secured flag are included in the firmware
filename to pick a firmware compatible with the part. These strings
were being added to the part string, but that is a misuse of the
string. The correct place for these is the fwf_name string, which
is specifically intended to select between multiple firmware files
for the same part.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Defer initializing the state of the ASP1 mixer registers until
the firmware has been downloaded and rebooted.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However, if it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link. Even if the ASP is used
as a firmware-firmware interconnect it is useful to have
ALSA controls for the ASP mixer. They are at least useful for
debugging.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP mixer registers. This means that we can't assume the default
state of these registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
DAPM normally reads the initial state of mux registers during
probe() but this would mean blocking probe() for several seconds
until the firmware has initialized them. To avoid this, the
mixer muxes are set SND_SOC_NOPM to prevent DAPM trying to read
the register state. Custom get/set callbacks are implemented for
ALSA control access, and these can safely block waiting for the
firmware download.
After the firmware download has completed, the state of the
mux registers is known so a work job is queued to call
snd_soc_dapm_mux_update_power() on each of the mux widgets.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Patch the SDW TX mixer registers to silicon defaults.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So the
firmware sets up the SDW TX mixer registers to whatever audio
is relevant on a specific system.
This means that the driver cannot assume the initial values
of these registers. But Linux has ALSA controls to configure
routing, so the registers can be patched to silicon default and
the ALSA controls used to select what audio to feed back to the
host capture path.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.
If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the check of fw_patched from cs35l56_is_fw_reload_needed().
Also remove the redundant check for control of the reset GPIO.
The fw_patched flag is set when cs35l56_dsp_work() has completed its
steps to download firmware and power-up wm_adsp. There was a check in
cs35l56_is_fw_reload_needed() to make a quick exit of 'false' if
!fw_patched. The original idea was that the system might be suspended
before the driver has ever made any attempt to download firmware, and
in that case the driver doesn't need to return to a patched state
because it was never in a patched state.
This check of fw_patched is buggy because it prevented ever recovering
from a failed patch. If a previous attempt to patch and reboot the
silicon had failed it would leave fw_patched==false. This would mean
the driver never attempted another download even though the fault may
have been cleared (by a hard reset, for example).
It is also a redundant check because the calling code already makes
a quick exit if cs35l56_component_probe() has not been called, which
deals with the original intent of this check but in a safer way.
The check for reset GPIO is redundant: if the silicon was hard-reset
the FIRMWARE_MISSING flag will be 1. But this check created an
expectation that the suspend/resume code toggles reset. This can't
easily be protected against accidental code breakage. The only reason
for the check was to skip runtime-resuming the driver to read the
PROTECTION_STATUS register when it already knows it reset the silicon.
But in that case the driver will have to be runtime-resumed to do
the firmware download. So it created an assumption for no benefit.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240129162737.497-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the call to cs35l56_set_patch() earlier in cs35l56_init() so
that it only adds the register patch on first-time initialization.
The call was after the post_soft_reset label, so every time this
function was run to re-initialize the hardware after a reset it would
call regmap_register_patch() and add the same reg_sequence again.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 898673b905 ("ASoC: cs35l56: Move shared data into a common data structure")
Link: https://msgid.link/r/20240129162737.497-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs35l56_component_remove() must call wm_adsp_power_down() and
wm_adsp2_component_remove().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l56->component pointer is used by the suspend-resume handling to
know whether the driver is fully instantiated. This is to prevent it
queuing dsp_work which would result in calling wm_adsp when the driver
is not an instantiated ASoC component. So this pointer must be cleared
by cs35l56_component_remove().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no need to overwrite fwf_name with a kstrdup() of the cs_dsp part
name. It is trivial to select either fwf_name or cs_dsp.part as the string
to use when building the filename in wm_adsp_request_firmware_file().
This leaves fwf_name entirely owned by the codec driver.
It also avoids problems with freeing the pointer. With the original code
fwf_name was either a pointer owned by the codec driver, or a kstrdup()
created by wm_adsp. This meant wm_adsp must free it if it set it, but not
if the codec driver set it. The code was handling this by using
devm_kstrdup().
But there is no absolute requirement that wm_adsp_common_init() must be
called from probe(), so this was a pseudo-memory leak - each new call to
wm_adsp_common_init() would allocate another block of memory but these
would only be freed if the owning codec driver was removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240129162737.497-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for the cases of system-specific bin file without a
wmfw before falling back to looking for a generic wmfw.
All system-specific options should be tried before falling
back to loading a generic wmfw/bin. With the original code,
the presence of a fallback generic wmfw on the filesystem
would prevent using a system-specific tuning with a ROM
firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 0e7d82cbea ("ASoC: wm_adsp: Add support for loading bin files without wmfw")
Link: https://msgid.link/r/20240129162737.497-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previous commit that added support for Huawei MateBook D16 2021
with Ryzen 4600H (HVY-WXX9 M1010) was incomplete.
To activate support for this laptop, the DMI table in
acp3x-es83xx machine driver must also be updated.
Fixes: b5338b1b90 ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop")
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://msgid.link/r/20240128172229.657142-1-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Chen-Yu Tsai <wens@kernel.org>:
This series adds SPDIF controllers for the H616 and H618.
There's also a fix for SPDIF on H6: the controller also has a
receiver that was not correctly modeled.
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Johan Hovold <johan+linaro@kernel.org>:
To reduce the risk of speaker damage the PA gain needs to be limited on
machines like the Lenovo Thinkpad X13s until we have active speaker
protection in place.
Limit the gain to the current default setting provided by the UCM
configuration which most user have so far been using (due to a bug in
the configuration files which prevented hardware volume control [1]).
The wsa883x PA volume control also turned out to be broken, which meant
that the default setting used by UCM configuration is actually the
lowest level (-3 dB). With the codec driver fixed, hardware volume
control also works as expected.
Note that the new wsa884x driver most likely suffers from a similar bug,
I'll send a fix for that once I've got that confirmed.
Included is also a related fix for the LPASS WSA macro driver, which
was changing the digital gain setting behind the back of user space and
which can result in excessive (or too low) digital gain.
There are further Qualcomm codec drivers that similarly appear to
manipulate various gain settings, but on closer inspection it turns out
that they only write back the current settings. Tests reveal that these
writes are indeed needed for any prior updates to take effect (at least
for the WSA and RX macros).
[1] https://github.com/alsa-project/alsa-ucm-conf/pull/382
The UCM configuration for the Lenovo ThinkPad X13s has up until now
been setting the speaker PA volume to the minimum -3 dB when enabling
the speakers, but this does not prevent the user from increasing the
volume further.
Limit the digital gain and PA volumes to a combined -3 dB in the machine
driver to reduce the risk of speaker damage until we have active speaker
protection in place (or higher safe levels have been established).
Note that the PA volume limit cannot be set lower than 0 dB or
PulseAudio gets confused when the first 16 levels all map to -3 dB.
Also note that this will probably need to be generalised using
machine-specific limits, but a common limit should do for now.
Cc: <stable@vger.kernel.org> # 6.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122181819.4038-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Probe calls wcd938x_populate_dt_data() which already prints all the
error cases with dev_err_probe(), so skip the additional dev_err().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
WCD938x sound codec driver ignores return status of getting regulators
and returns EINVAL instead of EPROBE_DEFER. If regulator provider
probes after the codec, system is left without probed audio:
wcd938x_codec audio-codec: wcd938x_probe: Fail to obtain platform data
wcd938x_codec: probe of audio-codec failed with error -22
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
