struct block_device lifecycle is defined by its inode (see fs/block_dev.c) -
block_device allocated first time we access /dev/loopXX and deallocated on
bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile"
we want that block_device stay alive until we destroy the loop device
with "losetup -d".
But because we do not hold /dev/loopXX inode its counter goes 0, and
inode/bdev can be destroyed at any moment. Usually it happens at memory
pressure or when user drops inode cache (like in the test below). When later in
loop_clr_fd() we want to use bdev we have use-after-free error with following
stack:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000280
bd_set_size+0x10/0xa0
loop_clr_fd+0x1f8/0x420 [loop]
lo_ioctl+0x200/0x7e0 [loop]
lo_compat_ioctl+0x47/0xe0 [loop]
compat_blkdev_ioctl+0x341/0x1290
do_filp_open+0x42/0xa0
compat_sys_ioctl+0xc1/0xf20
do_sys_open+0x16e/0x1d0
sysenter_dispatch+0x7/0x1a
To prevent use-after-free we need to grab the device in loop_set_fd()
and put it later in loop_clr_fd().
The issue is reprodusible on current Linus head and v3.3. Here is the test:
dd if=/dev/zero of=loop.file bs=1M count=1
while [ true ]; do
losetup /dev/loop0 loop.file
echo 2 > /proc/sys/vm/drop_caches
losetup -d /dev/loop0
done
[ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every
time we call loop_set_fd() we check that loop_device->lo_state is
Lo_unbound and set it to Lo_bound If somebody will try to set_fd again
it will get EBUSY. And if we try to loop_clr_fd() on unbound loop
device we'll get ENXIO.
loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under
loop_device->lo_ctl_mutex. ]
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull btrfs fixes from Chris Mason:
"We've had a busy two weeks of bug fixing. The biggest patches in here
are some long standing early-enospc problems (Josef) and a very old
race where compression and mmap combine forces to lose writes (me).
I'm fairly sure the mmap bug goes all the way back to the introduction
of the compression code, which is proof that fsx doesn't trigger every
possible mmap corner after all.
I'm sure you'll notice one of these is from this morning, it's a small
and isolated use-after-free fix in our scrub error reporting. I
double checked it here."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: don't drop path when printing out tree errors in scrub
Btrfs: fix wrong return value of btrfs_lookup_csum()
Btrfs: fix wrong reservation of csums
Btrfs: fix double free in the btrfs_qgroup_account_ref()
Btrfs: limit the global reserve to 512mb
Btrfs: hold the ordered operations mutex when waiting on ordered extents
Btrfs: fix space accounting for unlink and rename
Btrfs: fix space leak when we fail to reserve metadata space
Btrfs: fix EIO from btrfs send in is_extent_unchanged for punched holes
Btrfs: fix race between mmap writes and compression
Btrfs: fix memory leak in btrfs_create_tree()
Btrfs: fix locking on ROOT_REPLACE operations in tree mod log
Btrfs: fix missing qgroup reservation before fallocating
Btrfs: handle a bogus chunk tree nicely
Btrfs: update to use fs_state bit
A user reported a panic where we were panicing somewhere in
tree_backref_for_extent from scrub_print_warning. He only captured the trace
but looking at scrub_print_warning we drop the path right before we mess with
the extent buffer to print out a bunch of stuff, which isn't right. So fix this
by dropping the path after we use the eb if we need to. Thanks,
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Here are two fixes for sysfs that resolve issues that have been found by the
Trinity fuzz tool, causing oopses in sysfs. They both have been in linux-next
for a while to ensure that they do not cause any other problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlFUdHUACgkQMUfUDdst+ykk+ACfWz6U/DW97ibFusDj+Sys1pEt
essAn15ZFy/pT5myhCvxqVH0MHrIftup
=BM+Q
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull sysfs fixes from Greg Kroah-Hartman:
"Here are two fixes for sysfs that resolve issues that have been found
by the Trinity fuzz tool, causing oopses in sysfs. They both have
been in linux-next for a while to ensure that they do not cause any
other problems."
* tag 'driver-core-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: handle failure path correctly for readdir()
sysfs: fix race between readdir and lseek
Pull userns fixes from Eric W Biederman:
"The bulk of the changes are fixing the worst consequences of the user
namespace design oversight in not considering what happens when one
namespace starts off as a clone of another namespace, as happens with
the mount namespace.
The rest of the changes are just plain bug fixes.
Many thanks to Andy Lutomirski for pointing out many of these issues."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Restrict when proc and sysfs can be mounted
ipc: Restrict mounting the mqueue filesystem
vfs: Carefully propogate mounts across user namespaces
vfs: Add a mount flag to lock read only bind mounts
userns: Don't allow creation if the user is chrooted
yama: Better permission check for ptraceme
pid: Handle the exit of a multi-threaded init.
scm: Require CAP_SYS_ADMIN over the current pidns to spoof pids.
If we don't find the expected csum item, but find a csum item which is
adjacent to the specified extent, we should return -EFBIG, or we should
return -ENOENT. But btrfs_lookup_csum() return -EFBIG even the csum item
is not adjacent to the specified extent. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We reserve the space for csums only when we write data into a file, in
the other cases, such as tree log, log replay, we don't do reservation,
so we can use the reservation of the transaction handle just for the former.
And for the latter, we should use the tree's own reservation. But the
function - btrfs_csum_file_blocks() didn't differentiate between these
two types of the cases, fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The function btrfs_find_all_roots is responsible to allocate
memory for 'roots' and free it if errors happen,so the caller should not
free it again since the work has been done.
Besides,'tmp' is allocated after the function btrfs_find_all_roots,
so we can return directly if btrfs_find_all_roots() fails.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
A user reported a problem where he was getting early ENOSPC with hundreds of
gigs of free data space and 6 gigs of free metadata space. This is because the
global block reserve was taking up the entire free metadata space. This is
ridiculous, we have infrastructure in place to throttle if we start using too
much of the global reserve, so instead of letting it get this huge just limit it
to 512mb so that users can still get work done. This allowed the user to
complete his rsync without issues. Thanks
Cc: stable@vger.kernel.org
Reported-and-tested-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We need to hold the ordered_operations mutex while waiting on ordered extents
since we splice and run the ordered extents list. We need to make sure anybody
else who wants to wait on ordered extents does actually wait for them to be
completed. This will keep us from bailing out of flushing in case somebody is
already waiting on ordered extents to complete. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We are way over-reserving for unlink and rename. Rename is just some random
huge number and unlink accounts for tree log operations that don't actually
happen during unlink, not to mention the tree log doesn't take from the trans
block rsv anyway so it's completely useless. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Dave reported a warning when running xfstest 275. We have been leaking delalloc
metadata space when our reservations fail. This is because we were improperly
calculating how much space to free for our checksum reservations. The problem
is we would sometimes free up space that had already been freed in another
thread and we would end up with negative usage for the delalloc space. This
patch fixes the problem by calculating how much space the other threads would
have already freed, and then calculate how much space we need to free had we not
done the reservation at all, and then freeing any excess space. This makes
xfstests 275 no longer have leaked space. Thanks
Cc: stable@vger.kernel.org
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When you take a snapshot, punch a hole where there has been data, then take
another snapshot and try to send an incremental stream, btrfs send would
give you EIO. That is because is_extent_unchanged had no support for holes
being punched. With this patch, instead of returning EIO we just return
0 (== the extent is not unchanged) and we're good.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Cc: Alexander Block <ablock84@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Commit 06ae43f34b ("Don't bother with redoing rw_verify_area() from
default_file_splice_from()") lost the checks to test existence of the
write/aio_write methods. My apologies ;-/
Eventually, we want that in fs/splice.c side of things (no point
repeating it for every buffer, after all), but for now this is the
obvious minimal fix.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only allow unprivileged mounts of proc and sysfs if they are already
mounted when the user namespace is created.
proc and sysfs are interesting because they have content that is
per namespace, and so fresh mounts are needed when new namespaces
are created while at the same time proc and sysfs have content that
is shared between every instance.
Respect the policy of who may see the shared content of proc and sysfs
by only allowing new mounts if there was an existing mount at the time
the user namespace was created.
In practice there are only two interesting cases: proc and sysfs are
mounted at their usual places, proc and sysfs are not mounted at all
(some form of mount namespace jail).
Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
As a matter of policy MNT_READONLY should not be changable if the
original mounter had more privileges than creator of the mount
namespace.
Add the flag CL_UNPRIVILEGED to note when we are copying a mount from
a mount namespace that requires more privileges to a mount namespace
that requires fewer privileges.
When the CL_UNPRIVILEGED flag is set cause clone_mnt to set MNT_NO_REMOUNT
if any of the mnt flags that should never be changed are set.
This protects both mount propagation and the initial creation of a less
privileged mount namespace.
Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When a read-only bind mount is copied from mount namespace in a higher
privileged user namespace to a mount namespace in a lesser privileged
user namespace, it should not be possible to remove the the read-only
restriction.
Add a MNT_LOCK_READONLY mount flag to indicate that a mount must
remain read-only.
CC: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Guarantee that the policy of which files may be access that is
established by setting the root directory will not be violated
by user namespaces by verifying that the root directory points
to the root of the mount namespace at the time of user namespace
creation.
Changing the root is a privileged operation, and as a matter of policy
it serves to limit unprivileged processes to files below the current
root directory.
For reasons of simplicity and comprehensibility the privilege to
change the root directory is gated solely on the CAP_SYS_CHROOT
capability in the user namespace. Therefore when creating a user
namespace we must ensure that the policy of which files may be access
can not be violated by changing the root directory.
Anyone who runs a processes in a chroot and would like to use user
namespace can setup the same view of filesystems with a mount
namespace instead. With this result that this is not a practical
limitation for using user namespaces.
Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull vfs fixes from Al Viro:
"stable fodder; assorted deadlock fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vt: synchronize_rcu() under spinlock is not nice...
Nest rename_lock inside vfsmount_lock
Don't bother with redoing rw_verify_area() from default_file_splice_from()
... lest we get livelocks between path_is_under() and d_path() and friends.
The thing is, wrt fairness lglocks are more similar to rwsems than to rwlocks;
it is possible to have thread B spin on attempt to take lock shared while thread
A is already holding it shared, if B is on lower-numbered CPU than A and there's
a thread C spinning on attempt to take the same lock exclusive.
As the result, we need consistent ordering between vfsmount_lock (lglock) and
rename_lock (seq_lock), even though everything that takes both is going to take
vfsmount_lock only shared.
Spotted-by: Brad Spengler <spender@grsecurity.net>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Fix an NFSv4 idmapper regression
- Fix an Oops in the pNFS blocks client
- Fix up various issues with pNFS layoutcommit
- Ensure correct read ordering of variables in rpc_wake_up_task_queue_locked
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=OPbZ
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fix an NFSv4 idmapper regression
- Fix an Oops in the pNFS blocks client
- Fix up various issues with pNFS layoutcommit
- Ensure correct read ordering of variables in
rpc_wake_up_task_queue_locked
* tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked
NFSv4.1: Add a helper pnfs_commit_and_return_layout
NFSv4.1: Always clear the NFS_INO_LAYOUTCOMMIT in layoutreturn
NFSv4.1: Fix a race in pNFS layoutcommit
pnfs-block: removing DM device maybe cause oops when call dev_remove
NFSv4: Fix the string length returned by the idmapper
Since we only enforce an upper bound, not a lower bound, a "negative"
length can get through here.
The symptom seen was a warning when we attempt to a kmalloc with an
excessive size.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Btrfs uses page_mkwrite to ensure stable pages during
crc calculations and mmap workloads. We call clear_page_dirty_for_io
before we do any crcs, and this forces any application with the file
mapped to wait for the crc to finish before it is allowed to change
the file.
With compression on, the clear_page_dirty_for_io step is happening after
we've compressed the pages. This means the applications might be
changing the pages while we are compressing them, and some of those
modifications might not hit the disk.
This commit adds the clear_page_dirty_for_io before compression starts
and makes sure to redirty the page if we have to fallback to
uncompressed IO as well.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Reported-by: Alexandre Oliva <oliva@gnu.org>
cc: stable@vger.kernel.org
Pull nfsd bugfixes from J Bruce Fields:
"Fixes for a couple mistakes in the new DRC code. And thanks to Kent
Overstreet for noticing we've been sync'ing the wrong range on stable
writes since 3.8."
* 'for-3.9' of git://linux-nfs.org/~bfields/linux:
nfsd: fix bad offset use
nfsd: fix startup order in nfsd_reply_cache_init
nfsd: only unhash DRC entries that are in the hashtable
vfs_writev() updates the offset argument - but the code then passes the
offset to vfs_fsync_range(). Since offset now points to the offset after
what was just written, this is probably not what was intended
Introduced by face15025f "nfsd: use
vfs_fsync_range(), not O_SYNC, for stable writes".
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: stable@vger.kernel.org
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Dave Jones found another /proc issue with his Trinity tool: thanks to
the namespace model, we can have multiple /proc dentries that point to
the same inode, aliasing directories in /proc/<pid>/net/ for example.
This ends up being a total disaster, because it acts like hardlinked
directories, and causes locking problems. We rely on the topological
sort of the inodes pointed to by dentries, and if we have aliased
directories, that odering becomes unreliable.
In short: don't do this. Multiple dentries with the same (directory)
inode is just a bad idea, and the namespace code should never have
exposed things this way. But we're kind of stuck with it.
This solves things by just always allocating a new inode during /proc
dentry lookup, instead of using "iget_locked()" to look up existing
inodes by superblock and number. That actually simplies the code a bit,
at the cost of potentially doing more inode [de]allocations.
That said, the inode lookup wasn't free either (and did a lot of locking
of inodes), so it is probably not that noticeable. We could easily keep
the old lookup model for non-directory entries, but rather than try to
be excessively clever this just implements the minimal and simplest
workaround for the problem.
Reported-and-tested-by: Dave Jones <davej@redhat.com>
Analyzed-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull CIFS fixes from Steve French:
"Three small CIFS Fixes (the most important of the three fixes a recent
problem authenticating to Windows 8 using cifs rather than SMB2)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: ignore everything in SPNEGO blob after mechTypes
cifs: delay super block destruction until all cifsFileInfo objects are gone
cifs: map NT_STATUS_SHARING_VIOLATION to EBUSY instead of ETXTBSY
relatively obscure cornercases or races that were found using
regression tests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABCAAGBQJRSm5lAAoJENNvdpvBGATwZW8QAN7jMn7IaVCTXXblqgqba4uN
KvLGRgK7R/n1rIhdHoxJHumwRQLTppVzjDCc8ePnWhdypzMZNuzUvs+OoCFdkDsW
qf3CmL/p/R1oSiSzzFIs/7wGp7xBZ0l0BWZMFWd9EUg9cqoMBDA6KzcMF95fOtas
KsjRL+BThacVldS7jyKFwE4BrpXd0Z5V9qZ6wjQPPoBx8sXF4iYA+CZVo5FUKBs8
6I82LS1/PIYCe3IOSpCgyKXQqRzAYJANv1ndken5wW8jWT2R58e360OwZEVcpIN9
/caov+F5OKfk4iOGq3b+vwRplNhAI2S6C4vhMbmS2GPWE8Fnr8gubyqNAIIs5R/y
3zYHdqZESfuEF7K3QoAepiJhi3YIoRxXC1FxD7uxx7VBRhW2w8Ij5hlXhuSoh24M
MUiXgCeIxQb+ZfUx0OHV++LSOHVccU4y7Z0X+LpXQa6tEMBuSgK6yCKsGkyr8APN
gPMupTptgyUE3tFaCjqc7QKtmoeRAMSvzfqEyV6DlblIOe+3f/RJzRO222Xc4kxq
D9t2tOuPoXsR+ivtS5pEcrZkE4Y2hkJbJzb7XXvfoETixYsuX6VkiPK/D68S9eRe
VelqTM2lHPJi/3Wkle0p4pzWpEq70D8qZVp4TKLHMJCTQKpwUfopm5lvln87lc7w
4JDORIx/ed1u8MMTJlmG
=X3vc
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of regression and other bugs in ext4, most of which were
relatively obscure cornercases or races that were found using
regression tests."
* tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
ext4: fix data=journal fast mount/umount hang
ext4: fix ext4_evict_inode() racing against workqueue processing code
ext4: fix memory leakage in mext_check_coverage
ext4: use s_extent_max_zeroout_kb value as number of kb
ext4: use atomic64_t for the per-flexbg free_clusters count
jbd2: fix use after free in jbd2_journal_dirty_metadata()
ext4: reserve metadata block for every delayed write
ext4: update reserved space after the 'correction'
ext4: do not use yield()
ext4: remove unused variable in ext4_free_blocks()
ext4: fix WARN_ON from ext4_releasepage()
ext4: fix the wrong number of the allocated blocks in ext4_split_extent()
ext4: update extent status tree after an extent is zeroed out
ext4: fix wrong m_len value after unwritten extent conversion
ext4: add self-testing infrastructure to do a sanity check
ext4: avoid a potential overflow in ext4_es_can_be_merged()
ext4: invalidate extent status tree during extent migration
ext4: remove unnecessary wait for extent conversion in ext4_fallocate()
ext4: add warning to ext4_convert_unwritten_extents_endio
ext4: disable merging of uninitialized extents
...
We should free leaf and root before returning from the error
handling code.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
To resolve backrefs, ROOT_REPLACE operations in the tree mod log are
required to be tied to at least one KEY_REMOVE_WHILE_FREEING operation.
Therefore, those operations must be enclosed by tree_mod_log_write_lock()
and tree_mod_log_write_unlock() calls.
Those calls are private to the tree_mod_log_* functions, which means that
removal of the elements of an old root node must be logged from
tree_mod_log_insert_root. This partly reverts and corrects commit ba1bfbd5
(Btrfs: fix a tree mod logging issue for root replacement operations).
This fixes the brand-new version of xfstest 276 as of commit cfe73f71.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Steps to reproduce:
mkfs.btrfs <disk>
mount <disk> <mnt>
btrfs quota enable <mnt>
btrfs sub create <mnt>/subv
btrfs qgroup limit 10M <mnt>/subv
fallocate --length 20M <mnt>/subv/data
For the above example, fallocating will return successfully which
is not expected, we try to fix it by doing qgroup reservation before
fallocating.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If you restore a btrfs-image file system and try to mount that file system we'll
panic. That's because btrfs-image restores and just makes one big chunk to
envelope the whole disk, since they are really only meant to be messed with by
our btrfs-progs. So fix up btrfs_rmap_block and the callers of it for mount so
that we no longer panic but instead just return an error and fail to mount.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Now that we use bit operation to check fs_state, update
btrfs_free_fs_root()'s checker, otherwise we get back to
memory leak case.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We've had several reports of people attempting to mount Windows 8 shares
and getting failures with a return code of -EINVAL. The default sec=
mode changed recently to sec=ntlmssp. With that, we expect and parse a
SPNEGO blob from the server in the NEGOTIATE reply.
The current decode_negTokenInit function first parses all of the
mechTypes and then tries to parse the rest of the negTokenInit reply.
The parser however currently expects a mechListMIC or nothing to follow the
mechTypes, but Windows 8 puts a mechToken field there instead to carry
some info for the new NegoEx stuff.
In practice, we don't do anything with the fields after the mechTypes
anyway so I don't see any real benefit in continuing to parse them.
This patch just has the kernel ignore the fields after the mechTypes.
We'll probably need to reinstate some of this if we ever want to support
NegoEx.
Reported-by: Jason Burgess <jason@jacknife2.dns2go.com>
Reported-by: Yan Li <elliot.li.tech@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
default_file_splice_from() ends up calling vfs_write() (via very convoluted
callchain). It's an overkill, since we already have done rw_verify_area()
in the caller by the time we call vfs_write() we are under set_fs(KERNEL_DS),
so access_ok() is also pointless. Add a new helper (__kernel_write()),
use it instead of kernel_write() in there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In order to be able to safely return the layout in nfs4_proc_setattr,
we need to block new uses of the layout, wait for all outstanding
users of the layout to complete, commit the layout and then return it.
This patch adds a helper in order to do all this safely.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Note that clearing NFS_INO_LAYOUTCOMMIT is tricky, since it requires
you to also clear the NFS_LSEG_LAYOUTCOMMIT bits from the layout
segments.
The only two sites that need to do this are the ones that call
pnfs_return_layout() without first doing a layout commit.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
We need to clear the NFS_LSEG_LAYOUTCOMMIT bits atomically with the
NFS_INO_LAYOUTCOMMIT bit, otherwise we may end up with situations
where the two are out of sync.
The first half of the problem is to ensure that pnfs_layoutcommit_inode
clears the NFS_LSEG_LAYOUTCOMMIT bit through pnfs_list_write_lseg.
We still need to keep the reference to those segments until the RPC call
is finished, so in order to make it clear _where_ those references come
from, we add a helper pnfs_list_write_lseg_done() that cleans up after
pnfs_list_write_lseg.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
when pnfs block using device mapper,if umounting later,it maybe
cause oops. we apply "1 + sizeof(bl_umount_request)" memory for
msg->data, the memory maybe overflow when we do "memcpy(&dataptr
[sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request))",
because the size of bl_msg is more than 1 byte.
Signed-off-by: fanchaoting<fanchaoting@cn.fujitsu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In case of 'if (filp->f_pos == 0 or 1)' of sysfs_readdir(),
the failure from filldir() isn't handled, and the reference counter
of the sysfs_dirent object pointed by filp->private_data will be
released without clearing filp->private_data, so use after free
bug will be triggered later.
This patch returns immeadiately under the situation for fixing the bug,
and it is reasonable to return from readdir() when filldir() fails.
Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While readdir() is running, lseek() may set filp->f_pos as zero,
then may leave filp->private_data pointing to one sysfs_dirent
object without holding its reference counter, so the sysfs_dirent
object may be used after free in next readdir().
This patch holds inode->i_mutex to avoid the problem since
the lock is always held in readdir path.
Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions like nfs_map_uid_to_name() and nfs_map_gid_to_group() are
expected to return a string without any terminating NUL character.
Regression introduced by commit 57e62324e4
(NFS: Store the legacy idmapper result in the keyring).
Reported-by: Dave Chiluk <dave.chiluk@canonical.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Cc: stable@vger.kernel.org [>=3.4]
In data=journal mode, if we unmount the file system before a
transaction has a chance to complete, when the journal inode is being
evicted, we can end up calling into jbd2_log_wait_commit() for the
last transaction, after the journalling machinery has been shut down.
Arguably we should adjust ext4_should_journal_data() to return FALSE
for the journal inode, but the only place it matters is
ext4_evict_inode(), and so to save a bit of CPU time, and to make the
patch much more obviously correct by inspection(tm), we'll fix it by
explicitly not trying to waiting for a journal commit when we are
evicting the journal inode, since it's guaranteed to never succeed in
this case.
This can be easily replicated via:
mount -t ext4 -o data=journal /dev/vdb /vdb ; umount /vdb
------------[ cut here ]------------
WARNING: at /usr/projects/linux/ext4/fs/jbd2/journal.c:542 __jbd2_log_start_commit+0xba/0xcd()
Hardware name: Bochs
JBD2: bad log_start_commit: 3005630206 3005630206 0 0
Modules linked in:
Pid: 2909, comm: umount Not tainted 3.8.0-rc3 #1020
Call Trace:
[<c015c0ef>] warn_slowpath_common+0x68/0x7d
[<c02b7e7d>] ? __jbd2_log_start_commit+0xba/0xcd
[<c015c177>] warn_slowpath_fmt+0x2b/0x2f
[<c02b7e7d>] __jbd2_log_start_commit+0xba/0xcd
[<c02b8075>] jbd2_log_start_commit+0x24/0x34
[<c0279ed5>] ext4_evict_inode+0x71/0x2e3
[<c021f0ec>] evict+0x94/0x135
[<c021f9aa>] iput+0x10a/0x110
[<c02b7836>] jbd2_journal_destroy+0x190/0x1ce
[<c0175284>] ? bit_waitqueue+0x50/0x50
[<c028d23f>] ext4_put_super+0x52/0x294
[<c020efe3>] generic_shutdown_super+0x48/0xb4
[<c020f071>] kill_block_super+0x22/0x60
[<c020f3e0>] deactivate_locked_super+0x22/0x49
[<c020f5d6>] deactivate_super+0x30/0x33
[<c0222795>] mntput_no_expire+0x107/0x10c
[<c02233a7>] sys_umount+0x2cf/0x2e0
[<c02233ca>] sys_oldumount+0x12/0x14
[<c08096b8>] syscall_call+0x7/0xb
---[ end trace 6a954cc790501c1f ]---
jbd2_log_wait_commit: error: j_commit_request=-1289337090, tid=0
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Commit 84c17543ab (ext4: move work from io_end to inode) triggered a
regression when running xfstest #270 when the file system is mounted
with dioread_nolock.
The problem is that after ext4_evict_inode() calls ext4_ioend_wait(),
this guarantees that last io_end structure has been freed, but it does
not guarantee that the workqueue structure, which was moved into the
inode by commit 84c17543ab, is actually finished. Once
ext4_flush_completed_IO() calls ext4_free_io_end() on CPU #1, this
will allow ext4_ioend_wait() to return on CPU #2, at which point the
evict_inode() codepath can race against the workqueue code on CPU #1
accessing EXT4_I(inode)->i_unwritten_work to find the next item of
work to do.
Fix this by calling cancel_work_sync() in ext4_ioend_wait(), which
will be renamed ext4_ioend_shutdown(), since it is only used by
ext4_evict_inode(). Also, move the call to ext4_ioend_shutdown()
until after truncate_inode_pages() and filemap_write_and_wait() are
called, to make sure all dirty pages have been written back and
flushed from the page cache first.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e
*pdpt = 0000000030bc3001 *pde = 0000000000000000
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in:
Pid: 6, comm: kworker/u:0 Not tainted 3.8.0-rc3-00013-g84c1754-dirty #91 Bochs Bochs
EIP: 0060:[<c01dda6a>] EFLAGS: 00010046 CPU: 0
EIP is at cwq_activate_delayed_work+0x3b/0x7e
EAX: 00000000 EBX: 00000000 ECX: f505fe54 EDX: 00000000
ESI: ed5b697c EDI: 00000006 EBP: f64b7e8c ESP: f64b7e84
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 30bc2000 CR4: 000006f0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process kworker/u:0 (pid: 6, ti=f64b6000 task=f64b4160 task.ti=f64b6000)
Stack:
f505fe00 00000006 f64b7e9c c01de3d7 f6435540 00000003 f64b7efc c01def1d
f6435540 00000002 00000000 0000008a c16d0808 c040a10b c16d07d8 c16d08b0
f505fe00 c16d0780 00000000 00000000 ee153df4 c1ce4a30 c17d0e30 00000000
Call Trace:
[<c01de3d7>] cwq_dec_nr_in_flight+0x71/0xfb
[<c01def1d>] process_one_work+0x5d8/0x637
[<c040a10b>] ? ext4_end_bio+0x300/0x300
[<c01e3105>] worker_thread+0x249/0x3ef
[<c01ea317>] kthread+0xd8/0xeb
[<c01e2ebc>] ? manage_workers+0x4bb/0x4bb
[<c023a370>] ? trace_hardirqs_on+0x27/0x37
[<c0f1b4b7>] ret_from_kernel_thread+0x1b/0x28
[<c01ea23f>] ? __init_kthread_worker+0x71/0x71
Code: 01 83 15 ac ff 6c c1 00 31 db 89 c6 8b 00 a8 04 74 12 89 c3 30 db 83 05 b0 ff 6c c1 01 83 15 b4 ff 6c c1 00 89 f0 e8 42 ff ff ff <8b> 13 89 f0 83 05 b8 ff 6c c1
6c c1 00 31 c9 83
EIP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e SS:ESP 0068:f64b7e84
CR2: 0000000000000000
---[ end trace a1923229da53d8a4 ]---
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
- Fix for the return type of xfs_iomap_eof_prealloc_initial_size
from a1e16c2666
- Fix for a failed buffer readahead causing subsequent callers to
fail incorrectly
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=41Vk
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfs
Pull XFS fixes from Ben Myers:
- Fix for a potential infinite loop which was introduced in commit
4d559a3bcb ("xfs: limit speculative prealloc near ENOSPC
thresholds")
- Fix for the return type of xfs_iomap_eof_prealloc_initial_size from
commit a1e16c2666 ("xfs: limit speculative prealloc size on sparse
files")
- Fix for a failed buffer readahead causing subsequent callers to fail
incorrectly
* tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: ensure we capture IO errors correctly
xfs: fix xfs_iomap_eof_prealloc_initial_size type
xfs: fix potential infinite loop in xfs_iomap_prealloc_size()
If we end up doing "goto out_nomem" in this function, we'll call
nfsd_reply_cache_shutdown. That will attempt to walk the LRU list and
free entries, but that list may not be initialized yet if the server is
starting up for the first time. It's also possible for the shrinker to
kick in before we've initialized the LRU list.
Rearrange the initialization so that the LRU list_head and cache size
are initialized before doing any of the allocations that might fail.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's not safe to call hlist_del() on a newly initialized hlist_node.
That leads to a NULL pointer dereference. Only do that if the entry
is hashed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Failed buffer readahead can leave the buffer in the cache marked
with an error. Most callers that then issue a subsequent read on the
buffer do not zero the b_error field out, and so we may incorectly
detect an error during IO completion due to the stale error value
left on the buffer.
Avoid this problem by zeroing the error before IO submission. This
ensures that the only IO errors that are detected those captured
from are those captured from bio submission or completion.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit c163f9a176)
Fix the return type of xfs_iomap_eof_prealloc_initial_size() to
xfs_fsblock_t to reflect the fact that the return value may be an
unsigned 64 bits if XFS_BIG_BLKNOS is defined.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit e8108cedb1)
