The devm_ioremap() function does not return error pointers. It returns
NULL.
Fixes: 036a7584be ("drivers: perf: Add LLC-TAD perf counter support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211217145907.GA16611@kili
Signed-off-by: Will Deacon <will@kernel.org>
The kbuild robot reports that building the SMMUv3 PMU driver with
CONFIG_OF=n results in a warning for W=1 builds:
>> drivers/perf/arm_smmuv3_pmu.c:889:34: warning: unused variable 'smmu_pmu_of_match' [-Wunused-const-variable]
static const struct of_device_id smmu_pmu_of_match[] = {
^
Guard the match table with #ifdef CONFIG_OF.
Link: https://lore.kernel.org/r/202201041700.01KZEzhb-lkp@intel.com
Fixes: 3f7be43561 ("perf/smmuv3: Add devicetree support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
* for-next/perf-smmu:
perf/smmuv3: Synthesize IIDR from CoreSight ID registers
perf/smmuv3: Add devicetree support
dt-bindings: Add Arm SMMUv3 PMCG binding
PCIe PMU Root Complex Integrated End Point(RCiEP) device is supported
to sample bandwidth, latency, buffer occupation etc.
Each PMU RCiEP device monitors multiple Root Ports, and each RCiEP is
registered as a PMU in /sys/bus/event_source/devices, so users can
select target PMU, and use filter to do further sets.
Filtering options contains:
event - select the event.
port - select target Root Ports. Information of Root Ports are
shown under sysfs.
bdf - select requester_id of target EP device.
trig_len - set trigger condition for starting event statistics.
trig_mode - set trigger mode. 0 means starting to statistic when bigger
than trigger condition, and 1 means smaller.
thr_len - set threshold for statistics.
thr_mode - set threshold mode. 0 means count when bigger than threshold,
and 1 means smaller.
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/20211202080633.2919-3-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
This driver adds support for Last-level cache tag-and-data unit
(LLC-TAD) PMU that is featured in some of the Marvell's CN10K
infrastructure silicons.
The LLC is divided into 2N slices distributed across N Mesh tiles
in a single-socket configuration. The driver always configures the
same counter for all of the TADs. The user would end up effectively
reserving one of eight counters in every TAD to look across all TADs.
The occurrences of events are aggregated and presented to the user
at the end of an application run. The driver does not provide a way
for the user to partition TADs so that different TADs are used for
different applications.
The event counters are zeroed to start event counting to avoid any
rollover issues. TAD perf counters are 64-bit, so it's not currently
possible to overflow event counters at current mesh and core
frequencies.
To measure tad pmu events use perf tool stat command. For instance:
perf stat -e tad_dat_msh_in_dss,tad_req_msh_out_any <application>
perf stat -e tad_alloc_any,tad_hit_any,tad_tag_rd <application>
Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
Link: https://lore.kernel.org/r/20211115043506.6679-2-bbudiredla@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
The SMMU_PMCG_IIDR register was not present in older revisions of the
Arm SMMUv3 spec. On Arm Ltd. implementations, the IIDR value consists of
fields from several PIDR registers, allowing us to present a
standardized identifier to userspace.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20211117144844.241072-4-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Add device-tree support to the SMMUv3 PMCG driver.
Signed-off-by: Jay Chen <jkchen@linux.alibaba.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20211117144844.241072-3-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
In general, detailed performance analysis will require knoweldge of the
the SoC beyond the CMN itself - e.g. which actual CPUs/peripherals/etc.
are connected to each node. However for certain development and bringup
tasks it can be useful to have a quick overview of the CMN internal
topology to hand too. Add a debugfs file to map this out.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/159fd4d7e19fb3c8801a8cb64ee73ec50f55903c.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The second generation of CMN IPs add new node types and significantly
expand the configuration space with options for extra device ports on
edge XPs, either plumbed into the regular DTM or with extra dedicated
DTMs to monitor them, plus larger (and smaller) mesh sizes. Add basic
support for pulling this new information out of the hardware, piping
it around as necessary, and handling (most of) the new choices.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e58b495bcc7deec3882be4bac910ed0bf6979674.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In preparation for supporting newer CMN products, let's introduce a
means to differentiate the features and events which are specific to a
particular IP from those which remain common to the whole family. The
newer designs have also smoothed off some of the rough edges in terms
of discoverability, so separate out the parts of the flow which have
effectively now become CMN-600 quirks.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9f6368cdca4c821d801138939508a5bba54ccabb.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
With the value of CMN_MAX_DTMS increasing significantly, our validation
data structure is set to get quite big. Technically we could pack it at
least twice as densely, since we only need around 19 bits of information
per DTM, but that makes the code even more mind-bogglingly impenetrable,
and even half of "quite big" may still be uncomfortably large for a
stack frame (~1KB). Just move it to an off-stack allocation instead.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0cabff2e5839ddc0979e757c55515966f65359e4.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In cases where we do know which DTC domain a node belongs to, we can
skip initialising or reading the global count in DTCs where we know
it won't change. The machinery to achieve that is mostly in place
already, so finish hooking it up by converting the vestigial domain
tracking to propagate suitable bitmaps all the way through to events.
Note that this does not allow allocating such an unused counter to a
different event on that DTC, because that is a flippin' nightmare.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/51d930fd945ef51c81f5889ccca055c302b0a1d0.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When multiple nodes of the same type are connected to the same XP
(particularly in CAL configurations), it seems that they are likely
to be consecutive in logical ID. Therefore, we're likely to gain a
small benefit from an easy tweak to optimise out consecutive reads
of the same set of DTM counters for an aggregated event.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/7777d77c2df17693cd3dabb6e268906e15238d82.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Untangle DTMs from XPs into a dedicated abstraction. This helps make
things a little more obvious and robust, but primarily paves the way
for further development where new IPs can grow extra DTMs per XP.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9cca18b1b98f482df7f1aaf3d3213e7f39500423.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Refactor the places where we scan through the set of nodes to switch
from explicit array indexing to pointer-based iteration. This leads to
slightly simpler object code, but also makes the source less dense and
more pleasant for further development. It also unearths an almost-bug
in arm_cmn_event_init() where we've been depending on the "array index"
of NULL relative to cmn->dns being a sufficiently large number, yuck.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ee0c9eda9a643f46001ac43aadf3f0b1fd5660dd.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a bit more abstraction for the places where we decompose node IDs.
This will help keep things nice and manageable when we come to add yet
more variables which affect the node ID format. Also use the opportunity
to move the rest of the low-level node management helpers back up to the
logical place they were meant to be - how they ended up buried right in
the middle of the event-related definitions is somewhat of a mystery...
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/a2242a8c3c96056c13a04ae87bf2047e5e64d2d9.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Although CMN is currently (and overwhelmingly likely to remain) deployed
in arm64-only (modulo userspace) systems, the 64-bit "dependency" for
compile-testing was just laziness due to heavy reliance on readq/writeq
accessors. Since we only need one extra include for robustness in that
regard, let's pull that in, widen the compile-test coverage, and fix up
the smattering of type laziness that that brings to light.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/baee9ee0d0bdad8aaeb70f5a4b98d8fd4b1f5786.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
On a system with multiple CMN meshes, ideally we'd want to access each
PMU from within its own mesh, rather than with a long CML round-trip,
wherever feasible. Since such a system is likely to be presented as
multiple NUMA nodes, let's also hope a proximity domain is specified
for each CMN programming interface, and use that to guide our choice
of IRQ affinity to favour a node-local CPU where possible.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/32438b0d016e0649d882d47d30ac2000484287b9.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Attempting to migrate the PMU context after we've unregistered the PMU
device, or especially if we never successfully registered it in the
first place, is a woefully bad idea. It's also fundamentally pointless
anyway. Make sure to unregister an instance from the hotplug handler
*without* invoking the teardown callback.
Fixes: 0ba64770a2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/2c221d745544774e4b07583b65b5d4d94f7e0fe4.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
- Update the ACPICA code in the kernel to upstream revision 20210930
including the following changes:
* Fix system-wide resume issue caused by evaluating control
methods too early in the resume path (Rafael Wysocki).
* Add support for Windows 2020 _OSI string (Mario Limonciello).
* Add Generic Port Affinity type for SRAT (Alison Schofield).
* Add disassembly support for the NHLT ACPI table (Bob Moore).
- Avoid flushing caches before entering C3 type of idle states on
AMD processors (Deepak Sharma).
- Avoid enumerating CPUs that are not present and not online-capable
according to the platform firmware (Mario Limonciello).
- Add DMI-based mechanism to quirk IRQ overrides and use it for two
platforms (Hui Wang).
- Change the configuration of unused ACPI device objects to reflect
the D3cold power state after enumerating devices (Rafael Wysocki).
- Update MAINTAINERS information regarding ACPI (Rafael Wysocki).
- Fix typo in ACPI Kconfig (Masanari Iid).
- Use sysfs_emit() instead of snprintf() in some places (Qing Wang).
- Make the association of ACPI device objects with PCI devices more
straightforward and simplify the code doing that for all devices
in general (Rafael Wysocki).
- Use acpi_device_adr() in acpi_find_child_device() instead of
evaluating _ADR (Rafael Wysocki).
- Drop duplicate device IDs from PNP device IDs list (Krzysztof
Kozlowski).
- Allow acpi_idle_play_dead() to use C3 on AMD processors (Richard
Gong).
- Use ACPI_COMPANION() to simplify code in some drivers (Rafael
Wysocki).
- Check the states of all ACPI power resources during initialization
to avoid dealing with power resources in unknown states (Rafael
Wysocki).
- Fix ACPI power resource issues related to sharing wakeup power
resources (Rafael Wysocki).
- Avoid registering redundant suspend_ops (Rafael Wysocki).
- Report battery charging state as "full" if it appears to be over
the design capacity (André Almeida).
- Quirk GK45 mini PC to skip reading _PSR in the AC driver (Stefan
Schaeckeler).
- Mark apei_hest_parse() static (Christoph Hellwig).
- Relax platform response timeout to 1 second after instructing it
to inject an error (Shuai Xue).
- Make the PRM code handle memory allocation and remapping failures
more gracefully and drop some unnecessary blank lines from that
code (Aubrey Li).
- Fix spelling mistake in the ACPI documentation (Colin Ian King).
-----BEGIN PGP SIGNATURE-----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=Ni9a
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the most recent upstream
revision, address some issues related to the ACPI power resources
management, simplify the enumeration of PCI devices having ACPI
companions, add new quirks, fix assorted problems, update the
ACPI-related information in maintainers and clean up code in several
places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20210930
including the following changes:
- Fix system-wide resume issue caused by evaluating control
methods too early in the resume path (Rafael Wysocki).
- Add support for Windows 2020 _OSI string (Mario Limonciello).
- Add Generic Port Affinity type for SRAT (Alison Schofield).
- Add disassembly support for the NHLT ACPI table (Bob Moore).
- Avoid flushing caches before entering C3 type of idle states on AMD
processors (Deepak Sharma).
- Avoid enumerating CPUs that are not present and not online-capable
according to the platform firmware (Mario Limonciello).
- Add DMI-based mechanism to quirk IRQ overrides and use it for two
platforms (Hui Wang).
- Change the configuration of unused ACPI device objects to reflect
the D3cold power state after enumerating devices (Rafael Wysocki).
- Update MAINTAINERS information regarding ACPI (Rafael Wysocki).
- Fix typo in ACPI Kconfig (Masanari Iid).
- Use sysfs_emit() instead of snprintf() in some places (Qing Wang).
- Make the association of ACPI device objects with PCI devices more
straightforward and simplify the code doing that for all devices in
general (Rafael Wysocki).
- Use acpi_device_adr() in acpi_find_child_device() instead of
evaluating _ADR (Rafael Wysocki).
- Drop duplicate device IDs from PNP device IDs list (Krzysztof
Kozlowski).
- Allow acpi_idle_play_dead() to use C3 on AMD processors (Richard
Gong).
- Use ACPI_COMPANION() to simplify code in some drivers (Rafael
Wysocki).
- Check the states of all ACPI power resources during initialization
to avoid dealing with power resources in unknown states (Rafael
Wysocki).
- Fix ACPI power resource issues related to sharing wakeup power
resources (Rafael Wysocki).
- Avoid registering redundant suspend_ops (Rafael Wysocki).
- Report battery charging state as "full" if it appears to be over
the design capacity (André Almeida).
- Quirk GK45 mini PC to skip reading _PSR in the AC driver (Stefan
Schaeckeler).
- Mark apei_hest_parse() static (Christoph Hellwig).
- Relax platform response timeout to 1 second after instructing it to
inject an error (Shuai Xue).
- Make the PRM code handle memory allocation and remapping failures
more gracefully and drop some unnecessary blank lines from that
code (Aubrey Li).
- Fix spelling mistake in the ACPI documentation (Colin Ian King)"
* tag 'acpi-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (36 commits)
ACPI: glue: Use acpi_device_adr() in acpi_find_child_device()
perf: qcom_l2_pmu: ACPI: Use ACPI_COMPANION() directly
ACPI: APEI: mark apei_hest_parse() static
ACPI: APEI: EINJ: Relax platform response timeout to 1 second
gpio-amdpt: ACPI: Use the ACPI_COMPANION() macro directly
nouveau: ACPI: Use the ACPI_COMPANION() macro directly
ACPI: resources: Add one more Medion model in IRQ override quirk
ACPI: AC: Quirk GK45 to skip reading _PSR
ACPI: PM: sleep: Do not set suspend_ops unnecessarily
ACPI: PRM: Handle memory allocation and memory remap failure
ACPI: PRM: Remove unnecessary blank lines
ACPI: PM: Turn off wakeup power resources on _DSW/_PSW errors
ACPI: PM: Fix sharing of wakeup power resources
ACPI: PM: Turn off unused wakeup power resources
ACPI: PM: Check states of power resources during initialization
ACPI: replace snprintf() in "show" functions with sysfs_emit()
ACPI: LPSS: Use ACPI_COMPANION() directly
ACPI: scan: Release PM resources blocked by unused objects
ACPI: battery: Accept charges over the design capacity as full
ACPICA: Update version to 20210930
...
- Support for the Arm8.6 timer extensions, including a self-synchronising
view of the system registers to elide some expensive ISB instructions.
- Exception table cleanup and rework so that the fixup handlers appear
correctly in backtraces.
- A handful of miscellaneous changes, the main one being selection of
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.
- More mm and pgtable cleanups.
- KASAN support for "asymmetric" MTE, where tag faults are reported
synchronously for loads (via an exception) and asynchronously for
stores (via a register).
- Support for leaving the MMU enabled during kexec relocation, which
significantly speeds up the operation.
- Minor improvements to our perf PMU drivers.
- Improvements to the compat vDSO build system, particularly when
building with LLVM=1.
- Preparatory work for handling some Coresight TRBE tracing errata.
- Cleanup and refactoring of the SVE code to pave the way for SME
support in future.
- Ensure SCS pages are unpoisoned immediately prior to freeing them
when KASAN is enabled for the vmalloc area.
- Try moving to the generic pfn_valid() implementation again now that
the DMA mapping issue from last time has been resolved.
- Numerous improvements and additions to our FPSIMD and SVE selftests.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmF74ZYQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNI/eB/UZYAtmNi6xC5StPaETyMLeZph9BV/IqIFq
N71ds7MFzlX/agR6MwLbH2tBHezBtlQ90O732Jjz8zAec2cHd+7sx/w82JesX7PB
IuOfqP78rvtU4ZkKe1Rcd96QtYvbtNAqcRhIo95OzfV9xwuzkvdXI+ZTYhtCfCuZ
GozCqQoJtnNDayMtfzbDSXyJLNJc/qnIcUQhrt3vg12zbF3BcHxnmp0nBcHCqZEo
lDJYufju7p87kCzaFYda2WhlI3t+NThqKOiZ332wQfqzNcr+rw1Y4jWbnCfrdLtI
JfHT9yiuHDmFSYaJrk7NU8kftW31NV70bbhD7rZ+DQCVndl0lRc=
=3R3j
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's the usual summary below, but the highlights are support for
the Armv8.6 timer extensions, KASAN support for asymmetric MTE, the
ability to kexec() with the MMU enabled and a second attempt at
switching to the generic pfn_valid() implementation.
Summary:
- Support for the Arm8.6 timer extensions, including a
self-synchronising view of the system registers to elide some
expensive ISB instructions.
- Exception table cleanup and rework so that the fixup handlers
appear correctly in backtraces.
- A handful of miscellaneous changes, the main one being selection of
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.
- More mm and pgtable cleanups.
- KASAN support for "asymmetric" MTE, where tag faults are reported
synchronously for loads (via an exception) and asynchronously for
stores (via a register).
- Support for leaving the MMU enabled during kexec relocation, which
significantly speeds up the operation.
- Minor improvements to our perf PMU drivers.
- Improvements to the compat vDSO build system, particularly when
building with LLVM=1.
- Preparatory work for handling some Coresight TRBE tracing errata.
- Cleanup and refactoring of the SVE code to pave the way for SME
support in future.
- Ensure SCS pages are unpoisoned immediately prior to freeing them
when KASAN is enabled for the vmalloc area.
- Try moving to the generic pfn_valid() implementation again now that
the DMA mapping issue from last time has been resolved.
- Numerous improvements and additions to our FPSIMD and SVE
selftests"
[ armv8.6 timer updates were in a shared branch and already came in
through -tip in the timer pull - Linus ]
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
arm64: Select POSIX_CPU_TIMERS_TASK_WORK
arm64: Document boot requirements for FEAT_SME_FA64
arm64/sve: Fix warnings when SVE is disabled
arm64/sve: Add stub for sve_max_virtualisable_vl()
arm64: errata: Add detection for TRBE write to out-of-range
arm64: errata: Add workaround for TSB flush failures
arm64: errata: Add detection for TRBE overwrite in FILL mode
arm64: Add Neoverse-N2, Cortex-A710 CPU part definition
selftests: arm64: Factor out utility functions for assembly FP tests
arm64: vmlinux.lds.S: remove `.fixup` section
arm64: extable: add load_unaligned_zeropad() handler
arm64: extable: add a dedicated uaccess handler
arm64: extable: add `type` and `data` fields
arm64: extable: use `ex` for `exception_table_entry`
arm64: extable: make fixup_exception() return bool
arm64: extable: consolidate definitions
arm64: gpr-num: support W registers
arm64: factor out GPR numbering helpers
arm64: kvm: use kvm_exception_table_entry
arm64: lib: __arch_copy_to_user(): fold fixups into body
...
The ACPI_HANDLE() macro is a wrapper arond the ACPI_COMPANION()
macro and the ACPI handle produced by the former comes from the
ACPI device object produced by the latter, so it is way more
straightforward to evaluate the latter directly instead of passing
the handle produced by the former to acpi_bus_get_device().
Modify l2_cache_pmu_probe_cluster() accordingly (no intentional
functional impact).
While at it, rename the ACPI device pointer to adev for more
clarity.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Improve build test cover by allowing some drivers to build under
COMPILE_TEST where possible.
Some notes:
- Mostly a dependency on CONFIG_ACPI is not really required for only
building (but left untouched), but is required for TX2 which uses ACPI
functions which have no stubs
- XGENE required 64b dependency as it relies on some unsigned long perf
struct fields being 64b
- I don't see why TX2 requires NUMA to build, but left untouched
- Added an explicit dependency on GENERIC_MSI_IRQ_DOMAIN for
ARM_SMMU_V3_PMU, which is required for platform MSI functions
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1633085326-156653-3-git-send-email-john.garry@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
A LSL of 32 requires > 32b value to hold the result. However in
tx2_uncore_event_update(), 1UL << 32 currently only works as unsigned
long is 64b on a 64b system.
If we want to compile test for a 32b system, we need unsigned long long,
whose min size is 64b.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1633085326-156653-2-git-send-email-john.garry@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The PA PMU counter offset was correct in [1] and the driver has
already been verified. We want to keep the register offset using
lower case character in later version that is consistent with
the existed driver. Since there was no functional change, we
didn't do more test. However there is typo when modified the PA
PMU counter offset by mistake, so fix this bad mistake.
[1] https://www.spinics.net/lists/arm-kernel/msg865263.html
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/20210928123022.23467-1-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Russell reported that since 5.13, KVM's probing of the PMU has
started to fail on his HW. As it turns out, there is an implicit
ordering dependency between the architectural PMU probing code and
and KVM's own probing. If, due to probe ordering reasons, KVM probes
before the PMU driver, it will fail to detect the PMU and prevent it
from being advertised to guests as well as the VMM.
Obviously, this is one probing too many, and we should be able to
deal with any ordering.
Add a callback from the PMU code into KVM to advertise the registration
of a host CPU PMU, allowing for any probing order.
Fixes: 5421db1be3 ("KVM: arm64: Divorce the perf code from oprofile helpers")
Reported-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/YUYRKVflRtUytzy5@shell.armlinux.org.uk
Cc: stable@vger.kernel.org
ddr_perf_probe() misses to call ida_simple_remove() in an error path.
Jump to cpuhp_state_err to fix it.
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20210617122614.166823-1-jingxiangfeng@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
When multiple dtcs share the same IRQ number, the irq_friend which
used to refer to dtc object gets calculated incorrect which leads
to invalid pointer.
Fixes: 0ba64770a2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1623946129-3290-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Use common macro PMU_EVENT_ATTR_ID to simplify IMX8_DDR_PMU_EVENT_ATTR
Reviewed by Frank Li <Frank .li@nxp.com>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-7-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use common macro PMU_EVENT_ATTR_ID to simplify XGENE_PMU_EVENT_ATTR
Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-6-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use common macro PMU_EVENT_ATTR_ID to simplify L3CACHE_EVENT_ATTR
Cc: Andy Gross <agross@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-5-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use common macro PMU_EVENT_ATTR_ID to simplify L2CACHE_EVENT_ATTR
Cc: Andy Gross <agross@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-4-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
With global filtering, we only allow an event to be scheduled if its
filter settings exactly match those of any existing events, therefore
it is pointless to reapply the filter in that case. Much worse, though,
is that in doing that we trample the event type of counter 0 if it's
already active, and never touch the appropriate PMEVTYPERn so the new
event is likely not counting the right thing either. Don't do that.
CC: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/32c80c0e46237f49ad8da0c9f8864e13c4a803aa.1623153312.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
These are only put in an array of pointers to const attribute_group
structs. Make them const like the other static attribute_group structs
to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605221514.73449-1-rikard.falkeborn@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Link: https://lore.kernel.org/r/20210608084816.1046485-1-chenxiaosong2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
'Data source' is a new function for HHA PMU and config / clear
interface was wrong by mistake. 'HHA_DATSRC_CTRL' register is
mainly used for data source configuration, if we enable bit0
as driver, it will go on count the event and we didn't check
it carefully. So fix the issue and do as the initial purpose.
Fixes: 932f6a99f9 ("drivers/perf: hisi: Add new functions for HHA PMU")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1622709291-37996-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
request_irq() after setting IRQ_NOAUTOEN as below
irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can
be replaced by request_irq() with IRQF_NO_AUTOEN flag.
this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which
is being merged: https://lore.kernel.org/patchwork/patch/1388765/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1622595642-61678-3-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
request_irq() after setting IRQ_NOAUTOEN as below
irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
can be replaced by request_irq() with IRQF_NO_AUTOEN flag.
this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which
is being merged: https://lore.kernel.org/patchwork/patch/1388765/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1622595642-61678-2-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210528061738.23392-1-yuehaibing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210528014940.4184-1-yuehaibing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210528014749.24068-1-yuehaibing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210528014130.7708-1-yuehaibing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix some coding style issues reported by checkpatch.pl, including
following types:
ERROR: need consistent spacing around '-' (ctx:WxV)
ERROR: space required before the open parenthesis '('
Signed-off-by: Junhao He <hejunhao2@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620736054-58412-5-git-send-email-f.fangjian@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix some coding style issues reported by checkpatch.pl, including
following types:
ERROR: spaces required around that '=' (ctx:VxW)
WARNING: Possible unnecessary 'out of memory' message
Signed-off-by: Junhao He <hejunhao2@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620736054-58412-3-git-send-email-f.fangjian@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
