Add a comment explaining part of the logic for mm_cpumask trimming, and
add a (hopefully graceful) check and warning in case something gets it
wrong.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201217134731.488135-2-npiggin@gmail.com
This moves exception_enter/exit calls to wrapper functions for
synchronous interrupts. More interrupt handlers are covered by
this than previously.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-33-npiggin@gmail.com
This moves the 64s/hash context tracking from hash_page_mm() to
__do_hash_fault(), so it's no longer called by OCXL / SPU
accelerators, which was certainly the wrong thing to be doing,
because those callers are not low level interrupt handlers, so
should have entered a kernel context tracking already.
Then remain in kernel context for the duration of the fault,
rather than enter/exit for the hash fault then enter/exit for
the page fault, which is pointless.
Even still, calling exception_enter/exit in __do_hash_fault seems
questionable because that's touching per-cpu variables, tracing,
etc., which might have been interrupted by this hash fault or
themselves cause hash faults. But maybe I miss something because
hash_page_mm very deliberately calls trace_hash_fault too, for
example. So for now go with it, it's no worse than before, in this
regard.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-32-npiggin@gmail.com
Simple helper for synchronous interrupt handlers (i.e., process-context)
to enable interrupts if it was taken in an interrupts-enabled context.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-30-npiggin@gmail.com
This makes a small improvement to the description of the SLB interrupt
environment. Move the memory access restrictions into one paragraph,
and the interrupt restrictions into the next rather than mix them.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-18-npiggin@gmail.com
This simplifies code, and it is also useful when introducing
interrupt handler wrappers when introducing wrapper functionality
that doesn't cope with asm entry code calling into more than one
handler function.
32-bit and 64e still have some such cases, which limits some ways
they can use interrupt wrappers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-15-npiggin@gmail.com
This keeps the context tracking over the entire interrupt handler which
helps later with moving context tracking into interrupt wrappers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-14-npiggin@gmail.com
This function acts like an interrupt handler so it needs to follow
the standard interrupt handler function signature which will be
introduced in a future change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-13-npiggin@gmail.com
Similar to the previous patch this makes interrupt handler function
types more regular so they can be wrapped with the next patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-12-npiggin@gmail.com
Make mm fault handlers all just take the pt_regs * argument and load
DAR/DSISR from that. Make those that return a value return long.
This is done to make the function signatures match other handlers, which
will help with a future patch to add wrappers. Explicit arguments could
be added for performance but that would require more wrapper macro
variants.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-7-npiggin@gmail.com
The fault handling still has some complex logic particularly around
hash table handling, in asm. Implement most of this in C.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-6-npiggin@gmail.com
This fix the bad fault reported by KUAP when io_wqe_worker access userspace.
Bug: Read fault blocked by KUAP!
WARNING: CPU: 1 PID: 101841 at arch/powerpc/mm/fault.c:229 __do_page_fault+0x6b4/0xcd0
NIP [c00000000009e7e4] __do_page_fault+0x6b4/0xcd0
LR [c00000000009e7e0] __do_page_fault+0x6b0/0xcd0
..........
Call Trace:
[c000000016367330] [c00000000009e7e0] __do_page_fault+0x6b0/0xcd0 (unreliable)
[c0000000163673e0] [c00000000009ee3c] do_page_fault+0x3c/0x120
[c000000016367430] [c00000000000c848] handle_page_fault+0x10/0x2c
--- interrupt: 300 at iov_iter_fault_in_readable+0x148/0x6f0
..........
NIP [c0000000008e8228] iov_iter_fault_in_readable+0x148/0x6f0
LR [c0000000008e834c] iov_iter_fault_in_readable+0x26c/0x6f0
interrupt: 300
[c0000000163677e0] [c0000000007154a0] iomap_write_actor+0xc0/0x280
[c000000016367880] [c00000000070fc94] iomap_apply+0x1c4/0x780
[c000000016367990] [c000000000710330] iomap_file_buffered_write+0xa0/0x120
[c0000000163679e0] [c00800000040791c] xfs_file_buffered_aio_write+0x314/0x5e0 [xfs]
[c000000016367a90] [c0000000006d74bc] io_write+0x10c/0x460
[c000000016367bb0] [c0000000006d80e4] io_issue_sqe+0x8d4/0x1200
[c000000016367c70] [c0000000006d8ad0] io_wq_submit_work+0xc0/0x250
[c000000016367cb0] [c0000000006e2578] io_worker_handle_work+0x498/0x800
[c000000016367d40] [c0000000006e2cdc] io_wqe_worker+0x3fc/0x4f0
[c000000016367da0] [c0000000001cb0a4] kthread+0x1c4/0x1d0
[c000000016367e10] [c00000000000dbf0] ret_from_kernel_thread+0x5c/0x6c
The kernel consider thread AMR value for kernel thread to be
AMR_KUAP_BLOCKED. Hence access to userspace is denied. This
of course not correct and we should allow userspace access after
kthread_use_mm(). To be precise, kthread_use_mm() should inherit the
AMR value of the operating address space. But, the AMR value is
thread-specific and we inherit the address space and not thread
access restrictions. Because of this ignore AMR value when accessing
userspace via kernel thread.
current_thread_amr/iamr() are updated, because we use them in the
below stack.
....
[ 530.710838] CPU: 13 PID: 5587 Comm: io_wqe_worker-0 Tainted: G D 5.11.0-rc6+ #3
....
NIP [c0000000000aa0c8] pkey_access_permitted+0x28/0x90
LR [c0000000004b9278] gup_pte_range+0x188/0x420
--- interrupt: 700
[c00000001c4ef3f0] [0000000000000000] 0x0 (unreliable)
[c00000001c4ef490] [c0000000004bd39c] gup_pgd_range+0x3ac/0xa20
[c00000001c4ef5a0] [c0000000004bdd44] internal_get_user_pages_fast+0x334/0x410
[c00000001c4ef620] [c000000000852028] iov_iter_get_pages+0xf8/0x5c0
[c00000001c4ef6a0] [c0000000007da44c] bio_iov_iter_get_pages+0xec/0x700
[c00000001c4ef770] [c0000000006a325c] iomap_dio_bio_actor+0x2ac/0x4f0
[c00000001c4ef810] [c00000000069cd94] iomap_apply+0x2b4/0x740
[c00000001c4ef920] [c0000000006a38b8] __iomap_dio_rw+0x238/0x5c0
[c00000001c4ef9d0] [c0000000006a3c60] iomap_dio_rw+0x20/0x80
[c00000001c4ef9f0] [c008000001927a30] xfs_file_dio_aio_write+0x1f8/0x650 [xfs]
[c00000001c4efa60] [c0080000019284dc] xfs_file_write_iter+0xc4/0x130 [xfs]
[c00000001c4efa90] [c000000000669984] io_write+0x104/0x4b0
[c00000001c4efbb0] [c00000000066cea4] io_issue_sqe+0x3d4/0xf50
[c00000001c4efc60] [c000000000670200] io_wq_submit_work+0xb0/0x2f0
[c00000001c4efcb0] [c000000000674268] io_worker_handle_work+0x248/0x4a0
[c00000001c4efd30] [c0000000006746e8] io_wqe_worker+0x228/0x2a0
[c00000001c4efda0] [c00000000019d994] kthread+0x1b4/0x1c0
Fixes: 48a8ab4eeb ("powerpc/book3s64/pkeys: Don't update SPRN_AMR when in kernel mode.")
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210206025634.521979-1-aneesh.kumar@linux.ibm.com
It is safe to traverse mm->context.iommu_group_mem_list with either
mem_list_mutex or the RCU read lock held. Silence a few RCU-list false
positive warnings and fix a few missing RCU read locks.
arch/powerpc/mm/book3s64/iommu_api.c:330 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4305:
#0: c000000bc3fe4d68 (&container->lock){+.+.}-{3:3}, at: tce_iommu_ioctl.part.9+0xc7c/0x1870 [vfio_iommu_spapr_tce]
#1: c000000001501910 (mem_list_mutex){+.+.}-{3:3}, at: mm_iommu_get+0x50/0x190
====
arch/powerpc/mm/book3s64/iommu_api.c:132 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4305:
#0: c000000bc3fe4d68 (&container->lock){+.+.}-{3:3}, at: tce_iommu_ioctl.part.9+0xc7c/0x1870 [vfio_iommu_spapr_tce]
#1: c000000001501910 (mem_list_mutex){+.+.}-{3:3}, at: mm_iommu_do_alloc+0x120/0x5f0
====
arch/powerpc/mm/book3s64/iommu_api.c:292 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4312:
#0: c000000ecafe23c8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm]
#1: c000000045e6c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]
====
arch/powerpc/mm/book3s64/iommu_api.c:424 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4312:
#0: c000000ecafe23c8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm]
#1: c000000045e6c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200510051559.1959-1-cai@lca.pw
pseries_alloc_bootmem_huge_page() is only used locally in
alloc_bootmem_huge_page() and does not need to be external.
It fixes this W=1 compile error :
../arch/powerpc/mm/hugetlbpage.c:220:12: error: no previous prototype for ‘pseries_alloc_bootmem_huge_page’ [-Werror=missing-prototypes]
220 | int __init pseries_alloc_bootmem_huge_page(struct hstate *hstate)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-16-clg@kaod.org
It fixes this W=1 compile error :
../arch/powerpc/mm/book3s64/hash_utils.c:1867:6: error: no previous prototype for ‘hpte_insert_repeating’ [-Werror=missing-prototypes]
1867 | long hpte_insert_repeating(unsigned long hash, unsigned long vpn,
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-14-clg@kaod.org
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the hashed
page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core do not
share an L2, allowing the scheduler to make better scheduling decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various parts of
the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to:
Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard
Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater,
Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David
Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert
Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan
Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh
Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov,
Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior ,
Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König,
Vincent Stehlé, Youling Tang, Zhang Xiaoxu.
-----BEGIN PGP SIGNATURE-----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=Ga3K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the
hashed page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core
do not share an L2, allowing the scheduler to make better scheduling
decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various
parts of the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.
* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
powerpc: Add config fragment for disabling -Werror
powerpc/configs: Add ppc64le_allnoconfig target
powerpc/powernv: Rate limit opal-elog read failure message
powerpc/pseries/memhotplug: Quieten some DLPAR operations
powerpc/ps3: use dma_mapping_error()
powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
KVM: PPC: fix comparison to bool warning
KVM: PPC: Book3S: Assign boolean values to a bool variable
powerpc: Inline setup_kup()
powerpc/64s: Mark the kuap/kuep functions non __init
KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
powerpc/xive: Improve error reporting of OPAL calls
powerpc/xive: Simplify xive_do_source_eoi()
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
...
- Consolidate all kmap_atomic() internals into a generic implementation
which builds the base for the kmap_local() API and make the
kmap_atomic() interface wrappers which handle the disabling/enabling of
preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a mapping
is established. It has to disable migration instead to guarantee that
the virtual address of the mapped slot is the same accross preemption.
- Provide better debug facilities: guard pages and enforced utilization
of the mapping mechanics on 64bit systems when the architecture allows
it.
- Provide the new kmap_local() API which can now be used to cleanup the
kmap_atomic() usage sites all over the place. Most of the usage sites
do not require the implicit disabling of preemption and pagefaults so
the penalty on 64bit and 32bit non-highmem systems is removed and quite
some of the code can be simplified. A wholesale conversion is not
possible because some usage depends on the implicit side effects and
some need to be cleaned up because they work around these side effects.
The migrate disable side effect is only effective on highmem systems
and when enforced debugging is enabled. On 64bit and 32bit non-highmem
systems the overhead is completely avoided.
-----BEGIN PGP SIGNATURE-----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=n71I
-----END PGP SIGNATURE-----
Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
setup_kup() is used by both 64-bit and 32-bit code. However on 64-bit
it must not be __init, because it's used for CPU hotplug, whereas on
32-bit it should be __init because it calls setup_kuap/kuep() which
are __init.
We worked around that problem in the past by marking it __ref, see
commit 67d53f30e2 ("powerpc/mm: fix section mismatch for
setup_kup()").
Marking it __ref basically just omits it from section mismatch
checking, which can lead to bugs, and in fact it did, see commit
44b4c4450f ("powerpc/64s: Mark the kuap/kuep functions non __init")
We can avoid all these problems by just making it static inline.
Because all it does is call other functions, making it inline actually
shrinks the 32-bit vmlinux by ~76 bytes.
Make it __always_inline as pointed out by Christophe.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201214123011.311024-1-mpe@ellerman.id.au
The kernel calls these functions on CPU online and hence they must not
be marked __init.
Otherwise if the memory they occupied has been reused the system can
crash in various ways. Sachin reported it caused his LPAR to
spontaneously restart with no other output. With xmon enabled it may
drop into xmon with a dump like:
cpu 0x1: Vector: 700 (Program Check) at [c000000003c5fcb0]
pc: 00000000011e0a78
lr: 00000000011c51d4
sp: c000000003c5ff50
msr: 8000000000081001
current = 0xc000000002c12b00
paca = 0xc000000003cff280 irqmask: 0x03 irq_happened: 0x01
pid = 0, comm = swapper/1
...
[c000000003c5ff50] 0000000000087c38 (unreliable)
[c000000003c5ff70] 000000000003870c
[c000000003c5ff90] 000000000000d108
Fixes: 3b47b7549e ("powerpc/book3s64/kuap: Move KUAP related function outside radix")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Expand change log with details and xmon output]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201214080121.358567-1-aneesh.kumar@linux.ibm.com
One commit to implement copy_from_kernel_nofault_allowed(), otherwise
copy_from_kernel_nofault() can trigger warnings when accessing bad addresses in
some configurations.
Thanks to:
Christophe Leroy, Qian Cai.
-----BEGIN PGP SIGNATURE-----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=ERDG
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One commit to implement copy_from_kernel_nofault_allowed(), otherwise
copy_from_kernel_nofault() can trigger warnings when accessing bad
addresses in some configurations.
Thanks to Christophe Leroy and Qian Cai"
* tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()
PTE_FLAGS_OFFSET is defined in asm/page_32.h and used only
in hash_low.S
And PTE_FLAGS_OFFSET nullity depends on CONFIG_PTE_64BIT
Instead of tests like #if (PTE_FLAGS_OFFSET != 0), use
CONFIG_PTE_64BIT related code.
Also move the definition of PTE_FLAGS_OFFSET into hash_low.S
directly, that improves readability.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f5bc21db7a33dab55924734e6060c2e9daed562e.1606247495.git.christophe.leroy@csgroup.eu
All hugetlb range freeing functions have a verification like the following,
which only differs by the mask used, depending on the page table level.
start &= MASK;
if (start < floor)
return;
if (ceiling) {
ceiling &= MASK;
if (! ceiling)
return;
}
if (end - 1 > ceiling - 1)
return;
Refactor that into a helper function which takes the mask as
an argument, returning true when [start;end[ is not fully
contained inside [floor;ceiling[
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/16a571bb32eb6e8cd44bda484c8d81cd8a25e6d7.1604668827.git.christophe.leroy@csgroup.eu
Exception fixup doesn't require the heady full regs saving,
do it from do_page_fault() directly.
For that, split bad_page_fault() in two parts.
As bad_page_fault() can also be called from other places than
handle_page_fault(), it will still perform exception fixup and
fallback on __bad_page_fault().
handle_page_fault() directly calls __bad_page_fault() as the
exception fixup will now be done by do_page_fault()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bd07d6fef9237614cd6d318d8f19faeeadaa816b.1607491748.git.christophe.leroy@csgroup.eu
search_exception_tables() is an heavy operation, we have to avoid it.
When KUAP is selected, we'll know the fault has been blocked by KUAP.
When it is blocked by KUAP, check whether we are in an expected
userspace access place. If so, emit a warning to spot something is
going work. Otherwise, just remain silent, it will likely Oops soon.
When KUAP is not selected, it behaves just as if the address was
already in the TLBs and no fault was generated.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9870f01e293a5a76c4f4e4ddd4a6b0f63038c591.1607491748.git.christophe.leroy@csgroup.eu
The verification and message introduced by commit 374f3f5979
("powerpc/mm/hash: Handle user access of kernel address gracefully")
applies to all platforms, it should not be limited to BOOK3S.
Make the BOOK3S version of sanity_check_fault() the one for all,
and bail out earlier if not BOOK3S.
Fixes: 374f3f5979 ("powerpc/mm/hash: Handle user access of kernel address gracefully")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fe199d5af3578d3bf80035d203a94d742a7a28af.1607491748.git.christophe.leroy@csgroup.eu
There is no big poing in not pinning kernel text anymore, as now
we can keep pinned TLB even with things like DEBUG_PAGEALLOC.
Remove CONFIG_PIN_TLB_TEXT, making it always right.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop ifdef around mmu_pin_tlb() to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/203b89de491e1379f1677a2685211b7c32adfff0.1606231483.git.christophe.leroy@csgroup.eu
On hash 32 bits, handling minor protection faults like unsetting
dirty flag is heavy if done from the normal page_fault processing,
because it implies hash table software lookup for flushing the entry
and then a DSI is taken anyway to add the entry back.
When KUAP was implemented, as explained in commit a68c31fc01
("powerpc/32s: Implement Kernel Userspace Access Protection"),
protection faults has been diverted from hash_page() because
hash_page() was not able to identify a KUAP fault.
Implement KUAP verification in hash_page(), by clearing write
permission when the access is a kernel access and Ks is 1.
This works regardless of the address because kernel segments always
have Ks set to 0 while user segments have Ks set to 0 only
when kernel write to userspace is granted.
Then protection faults can be handled by hash_page() even for KUAP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8a4ffe4798e9ea32aaaccdf85e411bb1beed3500.1605542955.git.christophe.leroy@csgroup.eu
flush_range() handle both the MMU_FTR_HPTE_TABLE case and
the other case.
The non MMU_FTR_HPTE_TABLE case is trivial as it is only a call
to _tlbie()/_tlbia() which is not worth a dedicated function.
Make flush_range() a hash specific and call it from tlbflush.h based
on mmu_has_feature(MMU_FTR_HPTE_TABLE).
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/132ab19aae52abc8e06ab524ec86d4229b5b9c3d.1603348103.git.christophe.leroy@csgroup.eu
flush_tlb_mm() and flush_tlb_page() handle both the MMU_FTR_HPTE_TABLE
case and the other case.
The non MMU_FTR_HPTE_TABLE case is trivial as it is only a call
to _tlbie()/_tlbia() which is not worth a dedicated function.
Make flush_tlb_mm() and flush_tlb_page() hash specific and call
them from tlbflush.h based on mmu_has_feature(MMU_FTR_HPTE_TABLE).
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/11e932ded41ba6d9b251d89b7afa33cc060d3aa4.1603348103.git.christophe.leroy@csgroup.eu
_tlbie() and _tlbia() are used only on 603 cores while the
other functions are used only on cores having a hash table.
Move them into a new file named nohash_low.S
Add mmu_hash_lock var is used by both, it needs to go
in a common file.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9a265b1b17a64153463d361280cb4b43eb1266a4.1603348103.git.christophe.leroy@csgroup.eu
We now have an early hash table on hash MMU, so no need to check
Hash var to know if the Hash table is set of not.
Use mmu_has_feature(MMU_FTR_HPTE_TABLE) instead. This will allow
optimisation via jump_label.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f1766631a9e014b6433f1a3c12c726ddfce34220.1603348103.git.christophe.leroy@csgroup.eu
This partially reverts commit eb232b1624 ("powerpc/book3s64/kuap: Improve
error reporting with KUAP") and update the fault handler to print
[ 55.022514] Kernel attempted to access user page (7e6725b70000) - exploit attempt? (uid: 0)
[ 55.022528] BUG: Unable to handle kernel data access on read at 0x7e6725b70000
[ 55.022533] Faulting instruction address: 0xc000000000e8b9bc
[ 55.022540] Oops: Kernel access of bad area, sig: 11 [#1]
....
when the kernel access userspace address without unlocking AMR.
bad_kuap_fault() is added as part of commit 5e5be3aed2 ("powerpc/mm: Detect
bad KUAP faults") to catch userspace access incorrectly blocked by AMR. Hence
retain the full stack dump there even with hash translation. Also, add a comment
explaining the difference between hash and radix.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201208031539.84878-1-aneesh.kumar@linux.ibm.com
Three commits fixing possible missed TLB invalidations for multi-threaded
processes when CPUs are hotplugged in and out.
A fix for a host crash triggerable by host userspace (qemu) in KVM on Power9.
A fix for a host crash in machine check handling when running HPT guests on a
HPT host.
One commit fixing potential missed TLB invalidations when using the hash MMU on
Power9 or later.
A regression fix for machines with CPUs on node 0 but no memory.
Thanks to:
Aneesh Kumar K.V, Cédric Le Goater, Greg Kurz, Milan Mohanty, Milton Miller,
Nicholas Piggin, Paul Mackerras, Srikar Dronamraju.
-----BEGIN PGP SIGNATURE-----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=tIAZ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.10:
- Three commits fixing possible missed TLB invalidations for
multi-threaded processes when CPUs are hotplugged in and out.
- A fix for a host crash triggerable by host userspace (qemu) in KVM
on Power9.
- A fix for a host crash in machine check handling when running HPT
guests on a HPT host.
- One commit fixing potential missed TLB invalidations when using the
hash MMU on Power9 or later.
- A regression fix for machines with CPUs on node 0 but no memory.
Thanks to Aneesh Kumar K.V, Cédric Le Goater, Greg Kurz, Milan
Mohanty, Milton Miller, Nicholas Piggin, Paul Mackerras, and Srikar
Dronamraju"
* tag 'powerpc-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCE
KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity check
powerpc/numa: Fix a regression on memoryless node 0
powerpc/64s: Trim offlined CPUs from mm_cpumasks
kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling
powerpc/64s/pseries: Fix hash tlbiel_all_isa300 for guest kernels
powerpc/64s: Fix hash ISA v3.0 TLBIEL instruction generation
There is no defconfig selecting CONFIG_E200, and no platform.
e200 is an earlier version of booke, a predecessor of e500,
with some particularities like an unified cache instead of both an
instruction cache and a data cache.
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/34ebc3ba2c768d97f363bd5f2deea2356e9ae127.1605589460.git.christophe.leroy@csgroup.eu
SPRN_SPRG_PGDIR is there mainly to speedup SW TLB miss handlers
for powerpc 603.
We need to free SPRN_SPRG2 to reduce the mess with CONFIG_VMAP_STACK.
In hash_page(), reading PGDIR from thread_struct will be in the noise
performance wise.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4adca19b7120cdf619956768ed09e74fc6a558f3.1606285014.git.christophe.leroy@csgroup.eu
Since commit 2b279c0348 ("powerpc/32s: Allow mapping with BATs with
DEBUG_PAGEALLOC"), there is no real situation where mapping without
BATs is required.
In order to simplify memory handling, always map kernel text
and rodata with BATs even when "nobats" kernel parameter is set.
Also fix the 603 TLB miss exceptions that don't require anymore
kernel page table if DEBUG_PAGEALLOC.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da51f7ec632825a4ce43290a904aad61648408c0.1606285013.git.christophe.leroy@csgroup.eu
With hash translation use DSISR_KEYFAULT to identify a wrong access.
With Radix we look at the AMR value and type of fault.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-17-aneesh.kumar@linux.ibm.com
Now that kernel correctly store/restore userspace AMR/IAMR values, avoid
manipulating AMR and IAMR from the kernel on behalf of userspace.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-15-aneesh.kumar@linux.ibm.com
On fork, we inherit from the parent and on exec, we should switch to default_amr values.
Also, avoid changing the AMR register value within the kernel. The kernel now runs with
different AMR values.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-13-aneesh.kumar@linux.ibm.com
This patch updates kernel hash page table entries to use storage key 3
for its mapping. This implies all kernel access will now use key 3 to
control READ/WRITE. The patch also prevents the allocation of key 3 from
userspace and UAMOR value is updated such that userspace cannot modify key 3.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-9-aneesh.kumar@linux.ibm.com
This is in preparation to adding support for kuap with hash translation.
In preparation for that rename/move kuap related functions to
non radix names. Also move the feature bit closer to MMU_FTR_KUEP.
MMU_FTR_KUEP is renamed to MMU_FTR_BOOK3S_KUEP to indicate the feature
is only relevant to BOOK3S_64
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-8-aneesh.kumar@linux.ibm.com
The next set of patches adds support for kuep with hash translation.
In preparation for that rename/move kuap related functions to
non radix names.
Also set MMU_FTR_KUEP and add the missing isync().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-7-aneesh.kumar@linux.ibm.com
The next set of patches adds support for kuap with hash translation.
In preparation for that rename/move kuap related functions to
non radix names.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-6-aneesh.kumar@linux.ibm.com
This patch consolidates UAMOR update across pkey, kuap and kuep features.
The boot cpu initialize UAMOR via pkey init and both radix/hash do the
secondary cpu UAMOR init in early_init_mmu_secondary.
We don't check for mmu_feature in radix secondary init because UAMOR
is a supported SPRN with all CPUs supporting radix translation.
The old code was not updating UAMOR if we had smap disabled and smep enabled.
This change handles that case.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-5-aneesh.kumar@linux.ibm.com
The config CONFIG_PPC_PKEY is used to select the base support that is
required for PPC_MEM_KEYS, KUAP, and KUEP. Adding this dependency
reduces the code complexity(in terms of #ifdefs) and enables us to
move some of the initialization code to pkeys.c
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-4-aneesh.kumar@linux.ibm.com
Since ISA v3.0, SLB no longer uses the slb_cache, and stab_rr is no
longer correlated with SLB allocation. Move those to pre-3.0.
While here, improve some alignments and reduce whitespace.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201128070728.825934-9-npiggin@gmail.com
When offlining a CPU, powerpc/64s does not flush TLBs, rather it just
leaves the CPU set in mm_cpumasks, so it continues to receive TLBIEs
to manage its TLBs.
However the exit_flush_lazy_tlbs() function expects that after
returning, all CPUs (except self) have flushed TLBs for that mm, in
which case TLBIEL can be used for this flush. This breaks for offline
CPUs because they don't get the IPI to flush their TLB. This can lead
to stale translations.
Fix this by clearing the CPU from mm_cpumasks, then flushing all TLBs
before going offline.
These offlined CPU bits stuck in the cpumask also prevents the cpumask
from being trimmed back to local mode, which means continual broadcast
IPIs or TLBIEs are needed for TLB flushing. This patch prevents that
situation too.
A cast of many were involved in working this out, but in particular
Milton, Aneesh, Paul made key discoveries.
Fixes: 0cef77c779 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Milton Miller <miltonm@us.ibm.com>
Debugged-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126102530.691335-5-npiggin@gmail.com
tlbiel_all() can not be usable in !HVMODE when running hash presently,
remove HV privileged flushes when running in guest to make it usable.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126102530.691335-3-npiggin@gmail.com
A typo has the R field of the instruction assigned by lucky dip a la
register allocator.
Fixes: d4748276ae ("powerpc/64s: Improve local TLB flush for boot and MCE on POWER9")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126102530.691335-2-npiggin@gmail.com
The core-mm has a default __weak implementation of phys_to_target_node()
to mirror the weak definition of memory_add_physaddr_to_nid(). That
symbol is exported for modules. However, while the export in
mm/memory_hotplug.c exported the symbol in the configuration cases of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=y
...and:
CONFIG_NUMA_KEEP_MEMINFO=n
CONFIG_MEMORY_HOTPLUG=y
...it failed to export the symbol in the case of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=n
Not only is that broken, but Christoph points out that the kernel should
not be exporting any __weak symbol, which means that
memory_add_physaddr_to_nid() example that phys_to_target_node() copied
is broken too.
Rework the definition of phys_to_target_node() and
memory_add_physaddr_to_nid() to not require weak symbols. Move to the
common arch override design-pattern of an asm header defining a symbol
to replace the default implementation.
The only common header that all memory_add_physaddr_to_nid() producing
architectures implement is asm/sparsemem.h. In fact, powerpc already
defines its memory_add_physaddr_to_nid() helper in sparsemem.h.
Double-down on that observation and define phys_to_target_node() where
necessary in asm/sparsemem.h. An alternate consideration that was
discarded was to put this override in asm/numa.h, but that entangles
with the definition of MAX_NUMNODES relative to the inclusion of
linux/nodemask.h, and requires powerpc to grow a new header.
The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid
now that the symbol is properly exported / stubbed in all combinations
of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG.
[dan.j.williams@intel.com: v4]
Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com
[dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning]
Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: a035b6bf86 ("mm/memory_hotplug: introduce default phys_to_target_node() implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/160447639846.1133764.7044090803980177548.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's revert what we did in case something goes wrong and we return an
error - as already done on arm64 and s390x.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-8-david@redhat.com
The single caller (arch_remove_linear_mapping()) prints a proper
warning when this function fails. No need to eventually crash the
kernel - let's drop this WARN_ON.
Suggested-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-7-david@redhat.com
Let's print a warning similar to in arch_add_linear_mapping() instead of
WARN_ON_ONCE() and eventually crashing the kernel.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-6-david@redhat.com
This code currently relies on mem_hotplug_begin()/mem_hotplug_done() -
create_section_mapping()/remove_section_mapping() implementations
cannot tollerate getting called concurrently.
Let's prepare for callers (memtrace) not holding any such locks (and
don't force them to mess with memory hotplug locks).
Other parts in these functions don't seem to rely on external locking.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-5-david@redhat.com
We want to stop abusing memory hotplug infrastructure in memtrace code
to perform allocations and remove the linear mapping. Instead we will use
alloc_contig_pages() and remove the linear mapping manually.
Let's factor out creating/removing the linear mapping into
arch_create_linear_mapping() / arch_remove_linear_mapping() - so in the
future, we might be able to have whole arch_add_memory() /
arch_remove_memory() be implemented in common code.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-4-david@redhat.com
With POWER10, single tlbiel instruction invalidates all the congruence
class of the TLB and hence we need to issue only one tlbiel with SET=0.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201007053305.232879-1-aneesh.kumar@linux.ibm.com
powerpc used to set the PTE specific flags in set_pte_at(). That is
different from other architectures. To be consistent with other
architectures powerpc updated pfn_pte() to set _PAGE_PTE in commit
379c926d63 ("powerpc/mm: move setting pte specific flags to
pfn_pte")
That commit didn't do the same for pfn_pmd() because we expect
pmd_mkhuge() to do that. But as per Linus that is a bad rule:
The rule that you must use "pmd_mkhuge()" seems _completely_ wrong.
The only valid use to ever make a pmd out of a pfn is to make a
huge-page.
Hence update pfn_pmd() to set _PAGE_PTE.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201022091115.39568-1-aneesh.kumar@linux.ibm.com
No reason having the same code in every architecture
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201103095858.087635810@linutronix.de
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for
powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA
v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal Power9
systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about the
hardware topology on Power9/10, where two SMT4 cores can be presented by
firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to
prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen
Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig,
Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham
R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley,
Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo
Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar,
Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai,
Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott
Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
-----BEGIN PGP SIGNATURE-----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=akeX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
it for powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for
detecting ISA v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal
Power9 systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about
the hardware topology on Power9/10, where two SMT4 cores can be
presented by firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
to prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
selftests/powerpc: Fix eeh-basic.sh exit codes
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
powerpc/time: Make get_tb() common to PPC32 and PPC64
powerpc/time: Make get_tbl() common to PPC32 and PPC64
powerpc/time: Remove get_tbu()
powerpc/time: Avoid using get_tbl() and get_tbu() internally
powerpc/time: Make mftb() common to PPC32 and PPC64
powerpc/time: Rename mftbl() to mftb()
powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
powerpc/32s: Rename head_32.S to head_book3s_32.S
powerpc/32s: Setup the early hash table at all time.
powerpc/time: Remove ifdef in get_dec() and set_dec()
powerpc: Remove get_tb_or_rtc()
powerpc: Remove __USE_RTC()
powerpc: Tidy up a bit after removal of PowerPC 601.
powerpc: Remove support for PowerPC 601
powerpc: Remove PowerPC 601
powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
powerpc: Remove CONFIG_PPC601_SYNC_FIX
...
powerpc used to set the pte specific flags in set_pte_at(). This is
different from other architectures. To be consistent with other
architecture update pfn_pte to set _PAGE_PTE on ppc64. Also, drop now
unused pte_mkpte.
We add a VM_WARN_ON() to catch the usage of calling set_pte_at() without
setting _PAGE_PTE bit. We will remove that after a few releases.
With respect to huge pmd entries, pmd_mkhuge() takes care of adding the
_PAGE_PTE bit.
[akpm@linux-foundation.org: whitespace fix, per Christophe]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lkml.kernel.org/r/20200902114222.181353-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
There are several occurrences of the following pattern:
for_each_memblock(memory, reg) {
start = __pfn_to_phys(memblock_region_memory_base_pfn(reg);
end = __pfn_to_phys(memblock_region_memory_end_pfn(reg));
/* do something with start and end */
}
Using for_each_mem_range() iterator is more appropriate in such cases and
allows simpler and cleaner code.
[akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build]
[rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring]
Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are several occurrences of the following pattern:
for_each_memblock(memory, reg) {
start_pfn = memblock_region_memory_base_pfn(reg);
end_pfn = memblock_region_memory_end_pfn(reg);
/* do something with start_pfn and end_pfn */
}
Rather than iterate over all memblock.memory regions and each time query
for their start and end PFNs, use for_each_mem_pfn_range() iterator to get
simpler and clearer code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At the time being, an early hash table is set up when
CONFIG_KASAN is selected.
There is nothing wrong with setting such an early hash table
all the time, even if it is not used. This is a statically
allocated 256 kB table which lies in the init data section.
This makes the code simpler and may in the future allow to
setup early IO mappings with fixmap instead of hard coding BATs.
Put create_hpte() and flush_hash_pages() in the .ref.text section
in order to avoid warning for the reference to early_hash[]. This
reference is removed by MMU_init_hw_patch() before init memory is
freed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b8f8101c368b8a6451844a58d7bd7d83c14cf2aa.1601566529.git.christophe.leroy@csgroup.eu
PowerPC 601 has been retired.
Remove all associated specific code.
CPU_FTRS_PPC601 has CPU_FTR_COHERENT_ICACHE and CPU_FTR_COMMON.
CPU_FTR_COMMON is already present via other CPU_FTRS.
None of the remaining CPU selects CPU_FTR_COHERENT_ICACHE.
So CPU_FTRS_PPC601 can be removed from the possible features,
hence can be removed completely.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/60b725d55e21beec3335175c20b77903ff98284f.1601362098.git.christophe.leroy@csgroup.eu
Similar to commit 89c140bbae ("pseries: Fix 64 bit logical memory block panic")
make sure different variables tracking lmb_size are updated to be 64 bit.
Fixes: af9d00e93a ("powerpc/mm/radix: Create separate mappings for hot-plugged memory")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201007114836.282468-4-aneesh.kumar@linux.ibm.com
During memory hot-add, dlpar_add_lmb() calls memory_add_physaddr_to_nid()
to determine which node id (nid) to use when later calling __add_memory().
This is wasteful. On pseries, memory_add_physaddr_to_nid() finds an
appropriate nid for a given address by looking up the LMB containing the
address and then passing that LMB to of_drconf_to_nid_single() to get the
nid. In dlpar_add_lmb() we get this address from the LMB itself.
In short, we have a pointer to an LMB and then we are searching for
that LMB *again* in order to find its nid.
If we call of_drconf_to_nid_single() directly from dlpar_add_lmb() we
can skip the redundant lookup. The only error handling we need to
duplicate from memory_add_physaddr_to_nid() is the fallback to the
default nid when drconf_to_nid_single() returns -1 (NUMA_NO_NODE) or
an invalid nid.
Skipping the extra lookup makes hot-add operations faster, especially
on machines with many LMBs.
Consider an LPAR with 126976 LMBs. In one test, hot-adding 126000
LMBs on an upatched kernel took ~3.5 hours while a patched kernel
completed the same operation in ~2 hours:
Unpatched (12450 seconds):
Sep 9 04:06:31 ltc-brazos1 drmgr[810169]: drmgr: -c mem -a -q 126000
Sep 9 04:06:31 ltc-brazos1 kernel: pseries-hotplug-mem: Attempting to hot-add 126000 LMB(s)
[...]
Sep 9 07:34:01 ltc-brazos1 kernel: pseries-hotplug-mem: Memory at 20000000 (drc index 80000002) was hot-added
Patched (7065 seconds):
Sep 8 21:49:57 ltc-brazos1 drmgr[877703]: drmgr: -c mem -a -q 126000
Sep 8 21:49:57 ltc-brazos1 kernel: pseries-hotplug-mem: Attempting to hot-add 126000 LMB(s)
[...]
Sep 8 23:27:42 ltc-brazos1 kernel: pseries-hotplug-mem: Memory at 20000000 (drc index 80000002) was hot-added
It should be noted that the speedup grows more substantial when
hot-adding LMBs at the end of the drconf range. This is because we
are skipping a linear LMB search.
To see the distinction, consider smaller hot-add test on the same
LPAR. A perf-stat run with 10 iterations showed that hot-adding 4096
LMBs completed less than 1 second faster on a patched kernel:
Unpatched:
Performance counter stats for 'drmgr -c mem -a -q 4096' (10 runs):
104,753.42 msec task-clock # 0.992 CPUs utilized ( +- 0.55% )
4,708 context-switches # 0.045 K/sec ( +- 0.69% )
2,444 cpu-migrations # 0.023 K/sec ( +- 1.25% )
394 page-faults # 0.004 K/sec ( +- 0.22% )
445,902,503,057 cycles # 4.257 GHz ( +- 0.55% ) (66.67%)
8,558,376,740 stalled-cycles-frontend # 1.92% frontend cycles idle ( +- 0.88% ) (49.99%)
300,346,181,651 stalled-cycles-backend # 67.36% backend cycles idle ( +- 0.76% ) (50.01%)
258,091,488,691 instructions # 0.58 insn per cycle
# 1.16 stalled cycles per insn ( +- 0.22% ) (66.67%)
70,568,169,256 branches # 673.660 M/sec ( +- 0.17% ) (50.01%)
3,100,725,426 branch-misses # 4.39% of all branches ( +- 0.20% ) (49.99%)
105.583 +- 0.589 seconds time elapsed ( +- 0.56% )
Patched:
Performance counter stats for 'drmgr -c mem -a -q 4096' (10 runs):
104,055.69 msec task-clock # 0.993 CPUs utilized ( +- 0.32% )
4,606 context-switches # 0.044 K/sec ( +- 0.20% )
2,463 cpu-migrations # 0.024 K/sec ( +- 0.93% )
394 page-faults # 0.004 K/sec ( +- 0.25% )
442,951,129,921 cycles # 4.257 GHz ( +- 0.32% ) (66.66%)
8,710,413,329 stalled-cycles-frontend # 1.97% frontend cycles idle ( +- 0.47% ) (50.06%)
299,656,905,836 stalled-cycles-backend # 67.65% backend cycles idle ( +- 0.39% ) (50.02%)
252,731,168,193 instructions # 0.57 insn per cycle
# 1.19 stalled cycles per insn ( +- 0.20% ) (66.66%)
68,902,851,121 branches # 662.173 M/sec ( +- 0.13% ) (49.94%)
3,100,242,882 branch-misses # 4.50% of all branches ( +- 0.15% ) (49.98%)
104.829 +- 0.325 seconds time elapsed ( +- 0.31% )
This is consistent. An add-by-count hot-add operation adds LMBs
greedily, so LMBs near the start of the drconf range are considered
first. On an otherwise idle LPAR with so many LMBs we would expect to
find the LMBs we need near the start of the drconf range, hence the
smaller speedup.
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200916145122.3408129-1-cheloha@linux.ibm.com
The copy buffer is implemented as a real address in the nest which is
translated from EA by copy, and used for memory access by paste. This
requires that it be invalidated by TLB invalidation.
TLBIE does invalidate the copy buffer, but TLBIEL does not. Add
cp_abort to the tlbiel sequence.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fixup whitespace and comment formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200916030234.4110379-2-npiggin@gmail.com
Lookup the coregroup id from the associativity array.
If unable to detect the coregroup id, fallback on the core id.
This way, ensure sched_domain degenerates and an extra sched domain is
not created.
Ideally this function should have been implemented in
arch/powerpc/kernel/smp.c. However if its implemented in mm/numa.c, we
don't need to find the primary domain again.
If the device-tree mentions more than one coregroup, then kernel
implements only the last or the smallest coregroup, which currently
corresponds to the penultimate domain in the device-tree.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-11-srikar@linux.vnet.ibm.com
Add percpu coregroup maps and masks to create coregroup domain.
If a coregroup doesn't exist, the coregroup domain will be degenerated
in favour of SMT/CACHE domain. Do note this patch is only creating stubs
for cpu_to_coregroup_id. The actual cpu_to_coregroup_id implementation
would be in a subsequent patch.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-10-srikar@linux.vnet.ibm.com
Add support for grouping cores based on the device-tree classification.
- The last domain in the associativity domains always refers to the
core.
- If primary reference domain happens to be the penultimate domain in
the associativity domains device-tree property, then there are no
coregroups. However if its not a penultimate domain, then there are
coregroups. There can be more than one coregroup. For now we would be
interested in the last or the smallest coregroups, i.e one sub-group
per DIE.
Currently there are no firmwares that are exposing this grouping. Hence
allow the basis for grouping to be abstract. Once the firmware starts
using this grouping, code would be added to detect the type of grouping
and adjust the sd domain flags accordingly.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-8-srikar@linux.vnet.ibm.com
Currently Linux kernel with CONFIG_NUMA on a system with multiple
possible nodes, marks node 0 as online at boot. However in practice,
there are systems which have node 0 as memoryless and cpuless.
This can cause numa_balancing to be enabled on systems with only one node
with memory and CPUs. The existence of this dummy node which is cpuless and
memoryless node can confuse users/scripts looking at output of lscpu /
numactl.
By marking, node 0 as offline, lets stop assuming that node 0 is
always online. If node 0 has CPU or memory that are online, node 0 will
again be set as online.
v5.8
available: 2 nodes (0,2)
node 0 cpus:
node 0 size: 0 MB
node 0 free: 0 MB
node 2 cpus: 0 1 2 3 4 5 6 7
node 2 size: 32625 MB
node 2 free: 31490 MB
node distances:
node 0 2
0: 10 20
2: 20 10
proc and sys files
------------------
/sys/devices/system/node/online: 0,2
/proc/sys/kernel/numa_balancing: 1
/sys/devices/system/node/has_cpu: 2
/sys/devices/system/node/has_memory: 2
/sys/devices/system/node/has_normal_memory: 2
/sys/devices/system/node/possible: 0-31
v5.8 + patch
------------------
available: 1 nodes (2)
node 2 cpus: 0 1 2 3 4 5 6 7
node 2 size: 32625 MB
node 2 free: 31487 MB
node distances:
node 2
2: 10
proc and sys files
------------------
/sys/devices/system/node/online: 2
/proc/sys/kernel/numa_balancing: 0
/sys/devices/system/node/has_cpu: 2
/sys/devices/system/node/has_memory: 2
/sys/devices/system/node/has_normal_memory: 2
/sys/devices/system/node/possible: 0-31
Example of a node with online CPUs/memory on node 0.
(Same o/p with and without patch)
numactl -H
available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
node 0 size: 32482 MB
node 0 free: 22994 MB
node 1 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
node 1 size: 0 MB
node 1 free: 0 MB
node 2 cpus: 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
node 2 size: 0 MB
node 2 free: 0 MB
node 3 cpus: 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 node 3 size: 0 MB
node 3 free: 0 MB
node distances:
node 0 1 2 3
0: 10 20 40 40
1: 20 10 40 40
2: 40 40 10 20
3: 40 40 20 10
Note: On Powerpc, cpu_to_node of possible but not present cpus would
previously return 0. Hence this commit depends on commit ("powerpc/numa: Set
numa_node for all possible cpus") and commit ("powerpc/numa: Prefer node id
queried from vphn"). Without the 2 commits, Powerpc system might crash.
1. User space applications like Numactl, lscpu, that parse the sysfs tend to
believe there is an extra online node. This tends to confuse users and
applications. Other user space applications start believing that system was
not able to use all the resources (i.e missing resources) or the system was
not setup correctly.
2. Also existence of dummy node also leads to inconsistent information. The
number of online nodes is inconsistent with the information in the
device-tree and resource-dump
3. When the dummy node is present, single node non-Numa systems end up showing
up as NUMA systems and numa_balancing gets enabled. This will mean we take
the hit from the unnecessary numa hinting faults.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200818081104.57888-4-srikar@linux.vnet.ibm.com
Node id queried from the static device tree may not
be correct. For example: it may always show 0 on a shared processor.
Hence prefer the node id queried from vphn and fallback on the device tree
based node id if vphn query fails.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200818081104.57888-3-srikar@linux.vnet.ibm.com
A Powerpc system with multiple possible nodes and with CONFIG_NUMA
enabled always used to have a node 0, even if node 0 does not any cpus
or memory attached to it. As per PAPR, node affinity of a cpu is only
available once its present / online. For all cpus that are possible but
not present, cpu_to_node() would point to node 0.
To ensure a cpuless, memoryless dummy node is not online, powerpc need
to make sure all possible but not present cpu_to_node are set to a
proper node.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200818081104.57888-2-srikar@linux.vnet.ibm.com
As per draft LoPAPR (Revision 2.9_pre7), section B.5.3 "Run Time
Abstraction Services (RTAS) Node" available at:
https://openpowerfoundation.org/wp-content/uploads/2020/07/LoPAR-20200611.pdf
... there are 2 device tree properties:
"ibm,max-associativity-domains"
which defines the maximum number of domains that the firmware i.e
PowerVM can support.
and:
"ibm,current-associativity-domains"
which defines the maximum number of domains that the current
platform can support.
The value of "ibm,max-associativity-domains" is always greater than or
equal to "ibm,current-associativity-domains" property. If the latter
property is not available, use "ibm,max-associativity-domain" as a
fallback. In this yet to be released LoPAPR, "ibm,current-associativity-domains"
is mentioned in page 833 / B.5.3 which is covered under under
"Appendix B. System Binding" section
Currently powerpc uses the "ibm,max-associativity-domains" property
while setting the possible number of nodes. This is currently set at
32. However the possible number of nodes for a platform may be
significantly less. Hence set the possible number of nodes based on
"ibm,current-associativity-domains" property.
Nathan Lynch had raised a valid concern that post LPM (Live Partition
Migration), a user could DLPAR add processors and memory after LPM
with "new" associativity properties:
https://lore.kernel.org/linuxppc-dev/871rljfet9.fsf@linux.ibm.com/t/#u
He also pointed out that "ibm,max-associativity-domains" has the same
contents on all currently available PowerVM systems, unlike
"ibm,current-associativity-domains" and hence may be better able to
handle the new NUMA associativity properties.
However with the recent commit dbce456280 ("powerpc/numa: Limit
possible nodes to within num_possible_nodes"), all new NUMA
associativity properties are capped to initially set nr_node_ids.
Hence this commit should be safe with any new DLPAR add post LPM.
$ lsprop /proc/device-tree/rtas/ibm,*associ*-domains
/proc/device-tree/rtas/ibm,current-associativity-domains
00000005 00000001 00000002 00000002 00000002 00000010
/proc/device-tree/rtas/ibm,max-associativity-domains
00000005 00000001 00000008 00000020 00000020 00000100
$ cat /sys/devices/system/node/possible ##Before patch
0-31
$ cat /sys/devices/system/node/possible ##After patch
0-1
Note the maximum nodes this platform can support is only 2 but the
possible nodes is set to 32.
This is important because lot of kernel and user space code allocate
structures for all possible nodes leading to a lot of memory that is
allocated but not used.
I ran a simple experiment to create and destroy 100 memory cgroups on
boot on a 8 node machine (Power8 Alpine).
Before patch:
free -k at boot
total used free shared buff/cache available
Mem: 523498176 4106816 518820608 22272 570752 516606720
Swap: 4194240 0 4194240
free -k after creating 100 memory cgroups
total used free shared buff/cache available
Mem: 523498176 4628416 518246464 22336 623296 516058688
Swap: 4194240 0 4194240
free -k after destroying 100 memory cgroups
total used free shared buff/cache available
Mem: 523498176 4697408 518173760 22400 627008 515987904
Swap: 4194240 0 4194240
After patch:
free -k at boot
total used free shared buff/cache available
Mem: 523498176 3969472 518933888 22272 594816 516731776
Swap: 4194240 0 4194240
free -k after creating 100 memory cgroups
total used free shared buff/cache available
Mem: 523498176 4181888 518676096 22208 640192 516496448
Swap: 4194240 0 4194240
free -k after destroying 100 memory cgroups
total used free shared buff/cache available
Mem: 523498176 4232320 518619904 22272 645952 516443264
Swap: 4194240 0 4194240
Observations:
Fixed kernel takes 137344 kb (4106816-3969472) less to boot.
Fixed kernel takes 309184 kb (4628416-4181888-137344) less to create 100 memcgs.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[mpe: Reformat change log a bit for readability]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200817055257.110873-1-srikar@linux.vnet.ibm.com
Commit 0cef77c779 ("powerpc/64s/radix: flush remote CPUs out of
single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of
a process under certain conditions. One of the assumptions is that
mm_users would not be incremented via a reference outside the process
context with mmget_not_zero() then go on to kthread_use_mm() via that
reference.
That invariant was broken by io_uring code (see previous sparc64 fix),
but I'll point Fixes: to the original powerpc commit because we are
changing that assumption going forward, so this will make backports
match up.
Fix this by no longer relying on that assumption, but by having each CPU
check the mm is not being used, and clearing their own bit from the mask
only if it hasn't been switched-to by the time the IPI is processed.
This relies on commit 38cf307c1f ("mm: fix kthread_use_mm() vs TLB
invalidate") and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to disable irqs over mm
switch sequences.
Fixes: 0cef77c779 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Depends-on: 38cf307c1f ("mm: fix kthread_use_mm() vs TLB invalidate")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-5-npiggin@gmail.com
This ensures we don't do a partial mapping of memory. With nvdimm, when
creating namespaces with size not aligned to 16MB, the kernel ends up partially
mapping the pages. This can result in kernel adding multiple hash page table
entries for the same range. A new namespace will result in
create_section_mapping() with start and end overlapping an already existing
bolted hash page table entry.
commit: 6acd7d5ef2 ("libnvdimm/namespace: Enforce memremap_compat_align()")
made sure that we always create namespaces aligned to 16MB. But we can do
better by avoiding mapping pages that are not aligned. This helps to catch
access to these partially mapped pages early.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200907072539.67310-1-aneesh.kumar@linux.ibm.com
Before the commit identified below, pages tables allocation was
performed after the allocation of final shadow area for linear memory.
But that commit switched the order, leading to page tables being
already allocated at the time 8xx kasan_init_shadow_8M() is called.
Due to this, kasan_init_shadow_8M() doesn't map the needed
shadow entries because there are already page tables.
kasan_init_shadow_8M() installs huge PMD entries instead of page
tables. We could at that time free the page tables, but there is no
point in creating page tables that get freed before being used.
Only book3s/32 hash needs early allocation of page tables. For other
variants, we can keep the initial order and create remaining page
tables after the allocation of final shadow memory for linear mem.
Move back the allocation of shadow page tables for
CONFIG_KASAN_VMALLOC into kasan_init() after the loop which creates
final shadow memory for linear mem.
Fixes: 41ea93cf7b ("powerpc/kasan: Fix shadow pages allocation failure")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ae4554357da4882612644a74387ae05525b2aaa.1599800716.git.christophe.leroy@csgroup.eu
The 8xx has 4 page sizes: 4k, 16k, 512k and 8M
4k and 16k can be selected at build time as standard page sizes,
and 512k and 8M are hugepages.
When 4k standard pages are selected, 16k pages are not available.
Allow 16k pages as hugepages when 4k pages are used.
To allow that, implement arch_make_huge_pte() which receives
the necessary arguments to allow setting the PTE in accordance
with the page size:
- 512 k pages must have _PAGE_HUGE and _PAGE_SPS. They are set
by pte_mkhuge(). arch_make_huge_pte() does nothing.
- 16 k pages must have only _PAGE_SPS. arch_make_huge_pte() clears
_PAGE_HUGE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a518abc29266a708dfbccc8fce9ae6694fe4c2c6.1598862623.git.christophe.leroy@csgroup.eu
On 8xx, the number of entries occupied by a PTE in the page tables
depends on the size of the page. At the time being, this calculation
is done in two places: in pte_update() and in set_huge_pte_at()
Refactor this calculation into a helper called
number_of_cells_per_pte(). For the time being, the val param is
unused. It will be used by following patch.
Instead of opencoding is_hugepd(), use hugepd_ok() with a forward
declaration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f6ea2483c2c389567b007945948f704d18cfaeea.1598862623.git.christophe.leroy@csgroup.eu
The following random segfault is observed from time to time with
map_hugetlb selftest:
root@localhost:~# ./map_hugetlb 1 19
524288 kB hugepages
Mapping 1 Mbytes
Segmentation fault
[ 31.219972] map_hugetlb[365]: segfault (11) at 117 nip 77974f8c lr 779a6834 code 1 in ld-2.23.so[77966000+21000]
[ 31.220192] map_hugetlb[365]: code: 9421ffc0 480318d1 93410028 90010044 9361002c 93810030 93a10034 93c10038
[ 31.220307] map_hugetlb[365]: code: 93e1003c 93210024 8123007c 81430038 <80e90004> 814a0004 7f443a14 813a0004
[ 31.221911] BUG: Bad rss-counter state mm:(ptrval) type:MM_FILEPAGES val:33
[ 31.229362] BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:5
This fault is due to hugetlb_free_pgd_range() freeing page tables
that are also used by regular pages.
As explain in the comment at the beginning of
hugetlb_free_pgd_range(), the verification done in free_pgd_range()
on floor and ceiling is not done here, which means
hugetlb_free_pte_range() can free outside the expected range.
As the verification cannot be done in hugetlb_free_pgd_range(), it
must be done in hugetlb_free_pte_range().
Fixes: b250c8c08c ("powerpc/8xx: Manage 512k huge pages as standard pages.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f0cb2a5477cd87d1eaadb128042e20aeb2bc2859.1598860677.git.christophe.leroy@csgroup.eu
MAX_PHYSMEM #define is used along with sparsemem to determine the SECTION_SHIFT
value. Powerpc also uses the same value to limit the max memory enabled on the
system. With 4K PAGE_SIZE and hash translation mode, we want to limit the max
memory enabled to 64TB due to page table size restrictions. However, with
radix translation, we don't have these restrictions. Hence split the radix
and hash MA_PHYSMEM limit and use different limit for each of them.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200608070904.387440-4-aneesh.kumar@linux.ibm.com
POWER secure guests (i.e., guests which use the Protected Execution
Facility) need to use SWIOTLB to be able to do I/O with the
hypervisor, but they don't need the SWIOTLB memory to be in low
addresses since the hypervisor doesn't have any addressing limitation.
This solves a SWIOTLB initialization problem we are seeing in secure
guests with 128 GB of RAM: they are configured with 4 GB of
crashkernel reserved memory, which leaves no space for SWIOTLB in low
addresses.
To do this, we use mostly the same code as swiotlb_init(), but
allocate the buffer using memblock_alloc() instead of
memblock_alloc_low().
Fixes: 2efbc58f15 ("powerpc/pseries/svm: Force SWIOTLB for secure guests")
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200818221126.391073-1-bauerman@linux.ibm.com
At memory hot-remove time we can retrieve an LMB's nid from its
corresponding memory_block. There is no need to store the nid
in multiple locations.
Note that lmb_to_memblock() uses find_memory_block() to get the
corresponding memory_block. As find_memory_block() runs in sub-linear
time this approach is negligibly slower than what we do at present.
In exchange for this lookup at hot-remove time we no longer need to
call memory_add_physaddr_to_nid() during drmem_init() for each LMB.
On powerpc, memory_add_physaddr_to_nid() is a linear search, so this
spares us an O(n^2) initialization during boot.
On systems with many LMBs that initialization overhead is palpable and
disruptive. For example, on a box with 249854 LMBs we're seeing
drmem_init() take upwards of 30 seconds to complete:
[ 53.721639] drmem: initializing drmem v2
[ 80.604346] watchdog: BUG: soft lockup - CPU#65 stuck for 23s! [swapper/0:1]
[ 80.604377] Modules linked in:
[ 80.604389] CPU: 65 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc2+ #4
[ 80.604397] NIP: c0000000000a4980 LR: c0000000000a4940 CTR: 0000000000000000
[ 80.604407] REGS: c0002dbff8493830 TRAP: 0901 Not tainted (5.6.0-rc2+)
[ 80.604412] MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 44000248 XER: 0000000d
[ 80.604431] CFAR: c0000000000a4a38 IRQMASK: 0
[ 80.604431] GPR00: c0000000000a4940 c0002dbff8493ac0 c000000001904400 c0003cfffffede30
[ 80.604431] GPR04: 0000000000000000 c000000000f4095a 000000000000002f 0000000010000000
[ 80.604431] GPR08: c0000bf7ecdb7fb8 c0000bf7ecc2d3c8 0000000000000008 c00c0002fdfb2001
[ 80.604431] GPR12: 0000000000000000 c00000001e8ec200
[ 80.604477] NIP [c0000000000a4980] hot_add_scn_to_nid+0xa0/0x3e0
[ 80.604486] LR [c0000000000a4940] hot_add_scn_to_nid+0x60/0x3e0
[ 80.604492] Call Trace:
[ 80.604498] [c0002dbff8493ac0] [c0000000000a4940] hot_add_scn_to_nid+0x60/0x3e0 (unreliable)
[ 80.604509] [c0002dbff8493b20] [c000000000087c10] memory_add_physaddr_to_nid+0x20/0x60
[ 80.604521] [c0002dbff8493b40] [c0000000010d4880] drmem_init+0x25c/0x2f0
[ 80.604530] [c0002dbff8493c10] [c000000000010154] do_one_initcall+0x64/0x2c0
[ 80.604540] [c0002dbff8493ce0] [c0000000010c4aa0] kernel_init_freeable+0x2d8/0x3a0
[ 80.604550] [c0002dbff8493db0] [c000000000010824] kernel_init+0x2c/0x148
[ 80.604560] [c0002dbff8493e20] [c00000000000b648] ret_from_kernel_thread+0x5c/0x74
[ 80.604567] Instruction dump:
[ 80.604574] 392918e8 e9490000 e90a000a e92a0000 80ea000c 1d080018 3908ffe8 7d094214
[ 80.604586] 7fa94040 419d00dc e9490010 714a0088 <2faa0008> 409e00ac e9490000 7fbe5040
[ 89.047390] drmem: 249854 LMB(s)
With a patched kernel on the same machine we're no longer seeing the
soft lockup. drmem_init() now completes in negligible time, even when
the LMB count is large.
Fixes: b2d3b5ee66 ("powerpc/pseries: Track LMB nid instead of using device tree")
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811015115.63677-1-cheloha@linux.ibm.com
Nothing prevents flush_cache_instruction() from being writen in C.
Do it to improve readability and maintainability.
This function is only use by low level callers, it is not
intended to be used by module. Don't export it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f989eff8296800c427622c0985384148404e4f0b.1597384512.git.christophe.leroy@csgroup.eu
If the hypervisor doesn't support hugepages, the kernel ends up allocating a large
number of page table pages. The early page table allocation was wrongly
setting the max memblock limit to ppc64_rma_size with radix translation
which resulted in boot failure as shown below.
Kernel panic - not syncing:
early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff
CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2
Call Trace:
[c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable)
[c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418
[c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec
[c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4
[c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c
[c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170
This was because the kernel was checking for the radix feature before we enable the
feature via mmu_features. This resulted in the kernel using hash restrictions on
radix.
Rework the early init code such that the kernel boot with memblock restrictions
as imposed by hash. At that point, the kernel still hasn't finalized the
translation the kernel will end up using.
We have three different ways of detecting radix.
1. dt_cpu_ftrs_scan -> used only in case of PowerNV
2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan
3. CAS -> Where we negotiate with hypervisor about the supported translation.
We look at 1 or 2 early in the boot and after that, we look at the CAS vector to
finalize the translation the kernel will use. We also support a kernel command
line option (disable_radix) to switch to hash.
Update the memblock limit after mmu_early_init_devtree() if the kernel is going
to use radix translation. This forces some of the memblock allocations we do before
mmu_early_init_devtree() to be within the RMA limit.
Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Reported-by: Shirisha Ganta <shiganta@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200828100852.426575-1-aneesh.kumar@linux.ibm.com
Now that we are handling vmemmap list allocation failure correctly, don't
WARN in section deactivate when we don't find a mapping vmemmap list entry.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731113500.248306-2-aneesh.kumar@linux.ibm.com
If we fail to allocate vmemmap list, we don't keep track of allocated
vmemmap block buf. Hence on section deactivate we skip vmemmap block
buf free. This results in memory leak.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731113500.248306-1-aneesh.kumar@linux.ibm.com
This reverts commit 5c9fa16e8a.
Since PROT_SAO can still be useful for certain classes of software,
reintroduce it. Concerns about guest migration for LPARs using SAO
will be addressed next.
Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-2-shawn@anastas.io
In is_module_segment(), when VMALLOC_END is over 0xf0000000,
ALIGN(VMALLOC_END, SZ_256M) has value 0.
In that case, addr >= ALIGN(VMALLOC_END, SZ_256M) is always
true then is_module_segment() always returns false.
Use (ALIGN(VMALLOC_END, SZ_256M) - 1) which will have
value 0xffffffff and will be suitable for the comparison.
Fixes: c496433197 ("powerpc/32s: Only leave NX unset on segments used for modules")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/09fc73fe9c7423c6b4cf93f93df9bb0ed8eefab5.1597994047.git.christophe.leroy@csgroup.eu
IS_ENABLED() instead of #ifdef still requires variable declaration.
In this specific case, default_uamor is declared in asm/pkeys.h which
is only included if PPC_MEM_KEYS is enabled.
arch/powerpc/mm/book3s64/hash_utils.c: In function ‘hash__early_init_mmu_secondary’:
arch/powerpc/mm/book3s64/hash_utils.c:1119:21: error: ‘default_uamor’ undeclared (first use in this function)
1119 | mtspr(SPRN_UAMOR, default_uamor);
| ^~~~~~~~~~~~~
Fixes: 6553fb799f ("powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200817103301.158836-1-aneesh.kumar@linux.ibm.com
One fix for a boot crash on some platforms introduced by the recent pkey
refactoring.
Thanks to:
Christian Zigotzky, Aneesh Kumar K.V.
-----BEGIN PGP SIGNATURE-----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=d4vU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a boot crash on some platforms introduced by the recent
pkey refactoring.
Thanks to Christian Zigotzky and Aneesh Kumar K.V"
* tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)
Here're the last pieces of page fault accounting that were still done
outside handle_mm_fault() where we still have regs==NULL when calling
handle_mm_fault():
arch/powerpc/mm/copro_fault.c: copro_handle_mm_fault
arch/sparc/mm/fault_32.c: force_user_fault
arch/um/kernel/trap.c: handle_page_fault
mm/gup.c: faultin_page
fixup_user_fault
mm/hmm.c: hmm_vma_fault
mm/ksm.c: break_ksm
Some of them has the issue of duplicated accounting for page fault
retries. Some of them didn't do the accounting at all.
This patch cleans all these up by letting handle_mm_fault() to do per-task
page fault accounting even if regs==NULL (though we'll still skip the perf
event accountings). With that, we can safely remove all the outliers now.
There's another functional change in that now we account the page faults
to the caller of gup, rather than the task_struct that passed into the gup
code. More information of this can be found at [1].
After this patch, below things should never be touched again outside
handle_mm_fault():
- task_struct.[maj|min]_flt
- PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]
[1] https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-25-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the general page fault accounting by passing regs into
handle_mm_fault().
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20200707225021.200906-17-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: Page fault accounting cleanups", v5.
This is v5 of the pf accounting cleanup series. It originates from Gerald
Schaefer's report on an issue a week ago regarding to incorrect page fault
accountings for retried page fault after commit 4064b98270 ("mm: allow
VM_FAULT_RETRY for multiple times"):
https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/
What this series did:
- Correct page fault accounting: we do accounting for a page fault
(no matter whether it's from #PF handling, or gup, or anything else)
only with the one that completed the fault. For example, page fault
retries should not be counted in page fault counters. Same to the
perf events.
- Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf
event is used in an adhoc way across different archs.
Case (1): for many archs it's done at the entry of a page fault
handler, so that it will also cover e.g. errornous faults.
Case (2): for some other archs, it is only accounted when the page
fault is resolved successfully.
Case (3): there're still quite some archs that have not enabled
this perf event.
Since this series will touch merely all the archs, we unify this
perf event to always follow case (1), which is the one that makes most
sense. And since we moved the accounting into handle_mm_fault, the
other two MAJ/MIN perf events are well taken care of naturally.
- Unify definition of "major faults": the definition of "major
fault" is slightly changed when used in accounting (not
VM_FAULT_MAJOR). More information in patch 1.
- Always account the page fault onto the one that triggered the page
fault. This does not matter much for #PF handlings, but mostly for
gup. More information on this in patch 25.
Patchset layout:
Patch 1: Introduced the accounting in handle_mm_fault(), not enabled.
Patch 2-23: Enable the new accounting for arch #PF handlers one by one.
Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.)
Patch 25: Cleanup GUP task_struct pointer since it's not needed any more
This patch (of 25):
This is a preparation patch to move page fault accountings into the
general code in handle_mm_fault(). This includes both the per task
flt_maj/flt_min counters, and the major/minor page fault perf events. To
do this, the pt_regs pointer is passed into handle_mm_fault().
PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault
handlers.
So far, all the pt_regs pointer that passed into handle_mm_fault() is
NULL, which means this patch should have no intented functional change.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com
Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On p6 and before we should avoid updating UAMOR SPRN. This resulted
in boot failure on Nemo board.
Fixes: 269e829f48 ("powerpc/book3s64/pkey: Disable pkey on POWER6 and before")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810102623.685083-1-aneesh.kumar@linux.ibm.com
Merge misc updates from Andrew Morton:
- a few MM hotfixes
- kthread, tools, scripts, ntfs and ocfs2
- some of MM
Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
mm: vmscan: consistent update to pgrefill
mm/vmscan.c: fix typo
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: retract_page_tables() remember to test exit
khugepaged: collapse_pte_mapped_thp() protect the pmd lock
khugepaged: collapse_pte_mapped_thp() flush the right range
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
mm: thp: replace HTTP links with HTTPS ones
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
mm/page_alloc.c: skip setting nodemask when we are in interrupt
mm/page_alloc: fallbacks at most has 3 elements
mm/page_alloc: silence a KASAN false positive
mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
mm/page_alloc.c: simplify pageblock bitmap access
mm/page_alloc.c: extract the common part in pfn_to_bitidx()
mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
mm/shuffle: remove dynamic reconfiguration
mm/memory_hotplug: document why shuffle_zone() is relevant
mm/page_alloc: remove nr_free_pagecache_pages()
mm: remove vm_total_pages
...
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent
functions that call memory_present() for each region in memblock.memory:
sparse_memory_present_with_active_regions() and membocks_present().
Moreover, all architectures have a call to either of these functions
preceding the call to sparse_init() and in the most cases they are called
one after the other.
Mark the regions from memblock.memory as present during sparce_init() by
making sparse_init() call memblocks_present(), make memblocks_present()
and memory_present() functions static and remove redundant
sparse_memory_present_with_active_regions() function.
Also remove no longer required HAVE_MEMORY_PRESENT configuration option.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200712083130.22919-1-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are many instances where vmemap allocation is often switched between
regular memory and device memory just based on whether altmap is available
or not. vmemmap_alloc_block_buf() is used in various platforms to
allocate vmemmap mappings. Lets also enable it to handle altmap based
device memory allocation along with existing regular memory allocations.
This will help in avoiding the altmap based allocation switch in many
places. To summarize there are two different methods to call
vmemmap_alloc_block_buf().
vmemmap_alloc_block_buf(size, node, NULL) /* Allocate from system RAM */
vmemmap_alloc_block_buf(size, node, altmap) /* Allocate from altmap */
This converts altmap_alloc_block_buf() into a static function, drops it's
entry from the header and updates Documentation/vm/memory-model.rst.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jia He <justin.he@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Link: http://lkml.kernel.org/r/1594004178-8861-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: cleanup usage of <asm/pgalloc.h>"
Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.
In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>
In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.
This patch (of 8):
In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.
As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.
The process was somewhat automated using
sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))
where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.
[rppt@linux.ibm.com: fix powerpc warning]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on Power9
or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on
Power10 and future processors, leaving us with no way to implement the
functionality it requests. This risks breaking userspace, though we believe
it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion checking.
We now allow stack expansion up to the rlimit, like other architectures.
- Remove the remnants of our (previously disabled) topology update code, which
tried to react to NUMA layout changes on virtualised systems, but was prone
to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link stack
(branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as usual.
Thanks to:
Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy,
Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill
Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy,
Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A.
Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini,
Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe,
Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li
RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal
Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver
O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe
Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju,
Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung
Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong,
YueHaibing.
-----BEGIN PGP SIGNATURE-----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=QMY1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
Certain warnings are emitted for powerpc code when building with a gcc-10
toolset:
WARNING: modpost: vmlinux.o(.text.unlikely+0x377c): Section mismatch in
reference from the function remove_pmd_table() to the function
.meminit.text:split_kernel_mapping()
The function remove_pmd_table() references
the function __meminit split_kernel_mapping().
This is often because remove_pmd_table lacks a __meminit
annotation or the annotation of split_kernel_mapping is wrong.
Add the appropriate __init and __meminit annotations to make modpost not
complain. In all the cases there are just a single callsite from another
__init or __meminit function:
__meminit remove_pagetable() -> remove_pud_table() -> remove_pmd_table()
__init prom_init() -> setup_secure_guest()
__init xive_spapr_init() -> xive_spapr_disabled()
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200729133741.62789-1-vdronov@redhat.com
Currently, numa & prom are the only users of drmem LMB walk code.
Loading kdump with kexec_file also needs to walk the drmem LMBs to
setup the usable memory ranges for kdump kernel. But there are couple
of issues in using the code as is. One, walk_drmem_lmb() code is built
into the .init section currently, while kexec_file needs it later.
Two, there is no scope to pass data to the callback function for
processing and/or erroring out on certain conditions.
Fix that by, moving drmem LMB walk code out of .init section, adding
scope to pass data to the callback function and bailing out when an
error is encountered in the callback function.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602282727.575379.3979857013827701828.stgit@hbathini
This adds a kernel command line option that can be used to disable GTSE support.
Disabling GTSE implies kernel will make hcalls to invalidate TLB entries.
This was done so that we can do VM migration between configs that enable/disable
GTSE support via hypervisor. To migrate a VM from a system that supports
GTSE to a system that doesn't, we can boot the guest with
radix_hcall_invalidate=on, thereby forcing the guest to use hcalls for TLB
invalidates.
The check for hcall availability is done in pSeries_setup_arch so that
the panic message appears on the console. This should only happen on
a hypervisor that doesn't force the guest to hash translation even
though it can't handle the radix GTSE=0 request via CAS. With
radix_hcall_invalidate=on if the hypervisor doesn't support hcall_rpt_invalidate
hcall it should force the LPAR to hash translation.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727085908.420806-1-aneesh.kumar@linux.ibm.com
commit: cf11e85fc0 ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
added support for allocating gigantic hugepages using CMA. This patch
enables the same for powerpc
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713150749.25245-1-aneesh.kumar@linux.ibm.com
This code was merged 11 years ago in commit 13363ab9b9 ("powerpc:
Add definitions used by exception handling on 64-bit Book3E") but was
never able to be built because CONFIG_BOOK3E_MMU_TLB_STATS never
existed. Remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-4-mpe@ellerman.id.au
During memory hotplug and unplug, resize_hpt_for_hotplug() gets called
for both hash and radix guests but it should be called only for hash
guests. Though the call does nothing in the radix guest case, it is
cleaner to push this call into hash specific memory hotplug routines.
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727095704.1432916-1-bharata@linux.ibm.com
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The logic aims to prevent userspace from doing bad accesses below the
stack pointer. However as long as the stack is < 1MB in size, we allow
all accesses without further checks. Adding some debug I see that I
can do a full kernel build and LTP run, and not a single process has
used more than 1MB of stack. So for the majority of processes the
logic never even fires.
We also recently found a nasty bug in this code which could cause
userspace programs to be killed during signal delivery. It went
unnoticed presumably because most processes use < 1MB of stack.
The generic mm code has also grown support for stack guard pages since
this code was originally written, so the most heinous case of the
stack expanding into other mappings is now handled for us.
Finally although some other arches have special logic in this path,
from what I can tell none of x86, arm64, arm and s390 impose any extra
checks other than those in expand_stack().
So drop our complicated logic and like other architectures just let
the stack expand as long as its within the rlimit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20200724092528.1578671-4-mpe@ellerman.id.au
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The code was originally added in 2004 "ported from 2.4". The rough
logic is that the stack is allowed to grow to 1MB with no extra
checking. Over 1MB the access must be within 2048 bytes of the stack
pointer, or be from a user instruction that updates the stack pointer.
The 2048 byte allowance below the stack pointer is there to cover the
288 byte "red zone" as well as the "about 1.5kB" needed by the signal
delivery code.
Unfortunately since then the signal frame has expanded, and is now
4224 bytes on 64-bit kernels with transactional memory enabled. This
means if a process has consumed more than 1MB of stack, and its stack
pointer lies less than 4224 bytes from the next page boundary, signal
delivery will fault when trying to expand the stack and the process
will see a SEGV.
The total size of the signal frame is the size of struct rt_sigframe
(which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on
64-bit).
The 2048 byte allowance was correct until 2008 as the signal frame
was:
struct rt_sigframe {
struct ucontext uc; /* 0 1440 */
/* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1440 16 */
unsigned int tramp[6]; /* 1456 24 */
struct siginfo * pinfo; /* 1480 8 */
void * puc; /* 1488 8 */
struct siginfo info; /* 1496 128 */
/* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1624 288 */
/* size: 1920, cachelines: 15, members: 7 */
/* padding: 8 */
};
1920 + 128 = 2048
Then in commit ce48b21007 ("powerpc: Add VSX context save/restore,
ptrace and signal support") (Jul 2008) the signal frame expanded to
2304 bytes:
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */ <--
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1696 16 */
unsigned int tramp[6]; /* 1712 24 */
struct siginfo * pinfo; /* 1736 8 */
void * puc; /* 1744 8 */
struct siginfo info; /* 1752 128 */
/* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1880 288 */
/* size: 2176, cachelines: 17, members: 7 */
/* padding: 8 */
};
2176 + 128 = 2304
At this point we should have been exposed to the bug, though as far as
I know it was never reported. I no longer have a system old enough to
easily test on.
Then in 2010 commit 320b2b8de1 ("mm: keep a guard page below a
grow-down stack segment") caused our stack expansion code to never
trigger, as there was always a VMA found for a write up to PAGE_SIZE
below r1.
That meant the bug was hidden as we continued to expand the signal
frame in commit 2b0a576d15 ("powerpc: Add new transactional memory
state to the signal context") (Feb 2013):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */ <--
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[288]; /* 3576 288 */
/* size: 3872, cachelines: 31, members: 8 */
/* padding: 8 */
/* last cacheline: 32 bytes */
};
3872 + 128 = 4000
And commit 573ebfa660 ("powerpc: Increase stack redzone for 64-bit
userspace to 512 bytes") (Feb 2014):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[512]; /* 3576 512 */ <--
/* size: 4096, cachelines: 32, members: 8 */
/* padding: 8 */
};
4096 + 128 = 4224
Then finally in 2017, commit 1be7107fbe ("mm: larger stack guard
gap, between vmas") exposed us to the existing bug, because it changed
the stack VMA to be the correct/real size, meaning our stack expansion
code is now triggered.
Fix it by increasing the allowance to 4224 bytes.
Hard-coding 4224 is obviously unsafe against future expansions of the
signal frame in the same way as the existing code. We can't easily use
sizeof() because the signal frame structure is not in a header. We
will either fix that, or rip out all the custom stack expansion
checking logic entirely.
Fixes: ce48b21007 ("powerpc: Add VSX context save/restore, ptrace and signal support")
Cc: stable@vger.kernel.org # v2.6.27+
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
Commit 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the
caller") removed the local_irq_disable from hash_preload, but it was
required for more than just the page table walk: the hash pte busy bit is
effectively a lock which may be taken in interrupt context, and the local
update flag test must not be preempted before it's used.
This solves apparent lockups with perf interrupting __hash_page_64K. If
get_perf_callchain then also takes a hash fault on the same page while it
is already locked, it will loop forever taking hash faults, which looks like
this:
cpu 0x49e: Vector: 100 (System Reset) at [c00000001a4f7d70]
pc: c000000000072dc8: hash_page_mm+0x8/0x800
lr: c00000000000c5a4: do_hash_page+0x24/0x38
sp: c0002ac1cc69ac70
msr: 8000000000081033
current = 0xc0002ac1cc602e00
paca = 0xc00000001de1f280 irqmask: 0x03 irq_happened: 0x01
pid = 20118, comm = pread2_processe
Linux version 5.8.0-rc6-00345-g1fad14f18bc6
49e:mon> t
[c0002ac1cc69ac70] c00000000000c5a4 do_hash_page+0x24/0x38 (unreliable)
--- Exception: 300 (Data Access) at c00000000008fa60 __copy_tofrom_user_power7+0x20c/0x7ac
[link register ] c000000000335d10 copy_from_user_nofault+0xf0/0x150
[c0002ac1cc69af70] c00032bf9fa3c880 (unreliable)
[c0002ac1cc69afa0] c000000000109df0 read_user_stack_64+0x70/0xf0
[c0002ac1cc69afd0] c000000000109fcc perf_callchain_user_64+0x15c/0x410
[c0002ac1cc69b060] c000000000109c00 perf_callchain_user+0x20/0x40
[c0002ac1cc69b080] c00000000031c6cc get_perf_callchain+0x25c/0x360
[c0002ac1cc69b120] c000000000316b50 perf_callchain+0x70/0xa0
[c0002ac1cc69b140] c000000000316ddc perf_prepare_sample+0x25c/0x790
[c0002ac1cc69b1a0] c000000000317350 perf_event_output_forward+0x40/0xb0
[c0002ac1cc69b220] c000000000306138 __perf_event_overflow+0x88/0x1a0
[c0002ac1cc69b270] c00000000010cf70 record_and_restart+0x230/0x750
[c0002ac1cc69b620] c00000000010d69c perf_event_interrupt+0x20c/0x510
[c0002ac1cc69b730] c000000000027d9c performance_monitor_exception+0x4c/0x60
[c0002ac1cc69b750] c00000000000b2f8 performance_monitor_common_virt+0x1b8/0x1c0
--- Exception: f00 (Performance Monitor) at c0000000000cb5b0 pSeries_lpar_hpte_insert+0x0/0x160
[link register ] c0000000000846f0 __hash_page_64K+0x210/0x540
[c0002ac1cc69ba50] 0000000000000000 (unreliable)
[c0002ac1cc69bb00] c000000000073ae0 update_mmu_cache+0x390/0x3a0
[c0002ac1cc69bb70] c00000000037f024 wp_page_copy+0x364/0xce0
[c0002ac1cc69bc20] c00000000038272c do_wp_page+0xdc/0xa60
[c0002ac1cc69bc70] c0000000003857bc handle_mm_fault+0xb9c/0x1b60
[c0002ac1cc69bd50] c00000000006c434 __do_page_fault+0x314/0xc90
[c0002ac1cc69be20] c00000000000c5c8 handle_page_fault+0x10/0x2c
--- Exception: 300 (Data Access) at 00007fff8c861fe8
SP (7ffff6b19660) is in userspace
Fixes: 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the caller")
Reported-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reported-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727060947.10060-1-npiggin@gmail.com
